SOUTHERN CROSS SS STAINLESS STEEL HELICAL ROTOR PUMPS CORROSION RESISTANT PEDESTAL AND BOREHOLE POSITIVE DISPLACEMENT PUMPS FEATURES Designed and manufactured in Australia. Simplicity of design and reliable operation. Wide operating range for variable output. Grease lubricated, packed for life bearings. Flexible stainless steel whip shaft designed to flex with eccentric rotations of rotor and eliminate the need for costly universal joints. Particularly well suited to low volume high pressure work. Pedestal or borehole mounting with electric, engine or belt drive. Combination discharge head and vertical belt drive heads for electric motor mounting or quarter twist vee belt drive available for borehole applications. Bareshaft or direct coupled motorpump pedestal mounted units. OPERATING LIMITS APPLICATIONS CONSTRUCTION MATERIALS General Water Transfer Pedestal Cast Iron Capacity Stock Watering Bearing Housing Cast Iron Head Domestic Supplies Pump Outlet Cast Iron Max Water Temp. Agriculture Pump Outlet Pipe Cast Iron Pumped Liquid Stator SSHR-IF-0613 Rubber Whip Shaft Stainless Steel Helical Rotor Chrome Plated Stainless Steel Max. 2.2 l/sec (35USGPM) Max. 120m (386ft) Max 37°C (99°F) Clean Water PERFORMANCE Flow Rate (USGPM) 0 5 10 15 20 25 30 35 140 50Hz 450 400 120 350 100 300 SS520 80 250 200 60 Total Head (ft) Total Head (m) SS420 150 40 SS410 100 SS510 20 0 50 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0 Flow Rate (litres/sec) Pump Model Pedestal Motorpump Line Shaft Borehole No. of Stages Max. Head (m) Max Output (l/sec) SS410 SS420 SS510 SS520 SSM410 - 0.75kW SSM420 - 1.5kW SSM510 - 2.2kW SSM520 - 3.7kW SSB410 SSB420 SSB510 SSB520 1 2 1 2 60 120 60 120 1 1 2.2 2.2 PENTAIR SOUTHERN CROSS 8618 Warrego Highway, Withcott, QLD 4352 www.southerncross.pentair.com All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. A.B.N. 83 000 922 690 © 2013 Pentair, Ltd. All Rights Reserved. © 2013 Pentair Southern Cross SOUTHERN CROSS T SERIES PEDESTAL MOUNTED HELICAL ROTOR PUMPS PROGRESSIVE CAVITY POSITIVE DISPLACEMENT PUMPS FEATURES Designed and manufactured in Australia. Pump to high heads or over long distances. High efficiency, low maintenance. Constant non-pulsing discharge in either direction. Low power and running costs. Wide operating speed range for variable output. 50mm and 100mm (2” & 4”) AS2129 Table ‘E’ flanged connections. Packed gland, single or double mechanical shaft seal. Keyed, bare shaft, pulleys or coupling drive options as required. Optional access ports and cover plates for removing blockages (TDH/TDJ only). Optional rotor drive shaft to prevent solids from impeding drive shaft. OPERATING LIMITS APPLICATIONS CONSTRUCTION MATERIALS General Water Transfer Pedestal Cast Iron Soft Macerated Sewage Bearing Housing Cast Iron Soft Abottoir Effluent Pump Outlet Cast Iron Head Tallow and Blood Pump Outlet Pipe Cast Iron Max Water Temp. Animal and Vegetable Oils Stator Piggery Effluent Drive Shaft Stainless Steel Light Slurries Whip Shaft 431 Stainless Steel Helical Rotor THR-IF-0613 Rubber Chrome Plated Stainless Steel Capacity Max. 15 l/sec (238USGPM) Max. 144m (463ft) 37°C (99°F) PERFORMANCE 5 Flow Rate (USGPM) 10 25 50 100 200 500 150 20k 450 W W 15k kW 12 kW 10 W 130 W 5k W W 3k W 1k k 7.5 2k 140 400 120 0. 75 kW 100 350 400rpm-TDJ-1000rpm 500rpm-TDH - 1450rpm 90 0. 5k 80 300 500rpm-TDG-1750rpm W 250 70 200 60 50 150 400rpm-TXJ-1000rpm 40 500rpm-TXH - 1450rpm 30 100 500rpm-TXG-1750rpm 20 50 10 0 Total Head (ft) Total Head (m) 110 0 0.5 0.75 1.0 1.5 2.0 3.0 4.0 5.0 Flow Rate (l/s) 7.5 10 15 20 0 FEATURES Keyed shaft with optional Vee belt pulley Lip type bearing seal Sturdy cast iron pedestal and bearing housing with integral mounting feet Grease lubricated taper roller bearings O-ring seal Tapped drain hole PENTAIR SOUTHERN CROSS 8618 Warrego Highway, Withcott, QLD 4352 Flanged pump connection Adjustable packed gland or mechanical seal in detachable housing Optional access ports on larger sizes for easy pump cleaning Cast iron stator body sealed from pumped liquid Flanged pump connection Optional stainless steel drive shaft shroud to prevent solids entering hollow drive shaft Uniform rubber Flexible stainless steel rotor drive section in stator for higher efficiency shaft Lightweight chrome plated stainless steel rotor www.southerncross.pentair.com All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. A.B.N. 83 000 922 690 © 2013 Pentair, Ltd. All Rights Reserved. © 2013 Pentair Southern Cross