Luna 2x4
®
FLUORESCENT
perforated
DIMENSIONAL DATA
radial blade louver
FEATURES
5.00"
127.0mm
2'x4' recessed indirect with perforated center basket.
24.00"
609.6mm
Overall height for ST luminaire is 5.50"
lamping options
Reflector and end caps form seamless one-piece housing.
High reflectance, low gloss Matte White finish controls glare
and provides high efficiency.
Perforated shield hinges open for quick and easy relamping.
Optional radial blade louver offers a distinct look that
highlights interior architecture.
All luminaire combinations may be continuously row mounted.
T8 LAMPS
Luna® provides high angle uniform distribution ideal for
general illumination.
T5/T5HO LAMPS
PERFORMANCE
PRODUCT OVERVIEW
Lumen Output: 3966-10080lm
Wattage:62-177W
Lamping:
T5, T5HO, T8
2–Lamp T8
72% Efficient
1528 cd @ 10˚
Visit focalpointlights.com for complete photometric data.
Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | 773.247.9494 | focalpointlights.com | @focalpointlight
August 2015 G
fixture:
project:
ORDERING
MOUNTING INFORMATION
Luminaire Series
Luna
grid
drywall frame kit
specify “G” for flat 9/16" and 15/16" tee
or “ST” for 9/16" slot tee grid types.
specify “DF” Drywall Frame Kit for drywall
ceiling conditions.
Nominal Size
2' x 4'
Shielding
Perforated Shield
Radial Blade Louver
Lamp Quantity
Two Lamp
Three Lamp
“G” flat tee
“ST” slot tee
Luminaires may be installed in T-bar
ceiling systems up to 1 11/16" high in T8 lamp
configurations.
Use tie–wire or screws
to secure frame kit.
Overall height for ST luminaire is 5.50".
cut out dimensions:
2': Min: 24.25"
Max: 24.563"
4': Min: 48.25"
Max: 48.563"
SPECIFICATIONS
Construction
One-piece 20 Ga. steel reflector and housing. 20 Ga. steel ends form finished housing.
Lamps are shielded by detachable 22 Ga. steel perforated lamp shield with acrylic lens
insert. Lamp shield is secured by four spring–pins allowing shield to hinge down
for relamping. Optional radial blade louver: .75"H x 1" frequency fabricated of 20 Ga. steel
with acrylic lens insert. Top access 20 Ga. steel ballast compartment. Weight: 29 lbs.
Optic
One-piece 20 Ga. steel reflectors finished in Matte Satin White powder coat.
Electrical
Electronic ballasts are thermally protected and have a Class “P” rating. Optional dimming
ballasts available. Consult factory for dimming specifications and availability.
Labels
UL and cUL listed.
Finish
Polyester powder coat applied over a 5-stage pre–treatment.
Lamp Type
T8
(1 11/16" maximum grid height)
T5
T5HO
Circuit
Single Circuit
Dual Circuit
FLU
24
PS
RLP
2
3
T8
T5
T5HO
1C
2C
Voltage
120 Volt
277 Volt
347 Volt
120
277
347
UNV Volt
UNV
(Consult factory for dimming options)
(Cannot be specified with EM option)
Ballast
Electronic Program Start <10% THD
0-10V
Lutron 1% 3-wire
Lutron 1% H-Series
S
D7
DH
DK
Mounting
Drywall Frame Kit
DF
Grid
Slot Tee
Surface Mount
G
ST
SM
(Cut out dimensions:
Min: 24.25" Max: 24.563"
Min: 48.25" Max: 48.563")
Factory Options
Air Return
Chicago Plenum
Dust Cover
Drywall Frame Kit
Emergency Battery Pack*
Positional Clip
HLR/GLR Fuse
6' New York City Flex Whip
6' Flex Whip
Include 3000K Lamp*
Include 3500K Lamp*
Include 4100K Lamp*
Ballast Saving Tandem*
Labor Saving Master Satellite*
Separate Circuit Tandem*
Finish
Matte Satin White
FLU
AR
CP
DC
DF
EM
EQ
FU
FNY
FW
L830
L835
L841
BST
LS
SCT
WH
WH
5 DAY*
10 DAY*
Focal Point LLC reserves the right to change specifications for product improvement without notification.
*For more information visit focalpointlights.com/reference or consult factory.
Quickship is a limited offering, visit focalpointlights.com/quickship for specifics.