™
™
Beavertail™ is a division of Innovative Outdoor Solutions, Inc.
411 West Congress Street Maple Lake MN 55358
Toll Free 1.877.466.8837
www.explorebeavertail.com
2009 hunting and fishing products
™
™
Muscle behind outdoor technology.
ª
™
1...... Beavertail introduction
2...... Custom Aluminum Boats
4...... Boat Blinds
5......Performance Pods
6...... Surface Drive Motors
7...... Long Shaft Motors
8...... Sneak Boats
Ambush
9......Stealth 1200 & 2000
10....Final Attack
11....Phantom
12....Field Blinds (Full Framed)
Predator
13....Gunner
14....Field Blinds (Full Framed)
Destroyer
15....X-Terminator
16....Field Blinds (Frameless)
Comfort Zone
17....Field Fowler
18....Sniper & Sniper Deluxe
19....Hay Bale Blinds
20....Motor Specs & Boat Options
™
™
In the life of an outdoorsman are experiences that simply can’t
be explained in words. The tingles up your back as a flight of teal
whistle over your boat in the morning haze, or the excitement of
turning a wary group of geese into your spread. You simply need
to experience it to appreciate and understand…
At Beavertail™ we understand, because just like you we have
been there. It is this time in the field and passion for the outdoors
that drive us to design and build products that go beyond “good
enough” and enhance this precious time that we spend in the
great outdoors.
Look under the surface and you will see innovation and thoughtful
design built into every Beavertail™ product we offer. So take some
time to review our product line and you will see what sets us apart,
and the reason why we will always remain a step ahead.
No compromises. No shortcuts. No excuses.
Live the legacy…
™
1
At Beavertail
™
we’re building
a legacy one boat at a time.
In this one size fits all world,
we are proud to go against the grain
and build a boat that is specific to
your needs, not what a production
line thinks you should have.
At the heart of every Beavertail
boat you’ll find features that other
manufacturers call extra, but we
Standard Features: All welded, durable 100 gauge aluminum
hull, stern and sidewall construction • Two 10’ water resistant
gun boxes for stowing firearms, fishing rods, and extra gear
• Drop floor in stern for securing batteries and fuel tank
• Flat diamond plate floors and forward deck for an ultra stable
operating platform • Heavy duty rub rail sidewall cap
• Exclusive forward tapered front deck to run water back out the bow
and away from you and your gear • Patent pending Performance Flotation
Pods™ • Built in interior tubing for accessory wiring • Foam filled floor, front deck,
& pods for extra flotation and load off-set • 24” sidewalls • Front and rear exterior grab handles
• Interior mounted Heavy duty tie down loops • Super-durable Olive-drab paint for a non-reflective
wear resistant finish.
If you can dream it, we can build it. Your hunting boat should meet your personal usage needs as well
as your hunting style. We’ve provided the basics, tell us what’s next. To get you started take a look at
our list of popular options at the back of this catalog. Not seeing what you want? No worries, that’s what
custom is all about. Tell us what you are looking for, and we’ll make your dream a reality!
Custom Boat Size are Available in any Combination of the Following Dimensions.
14’ - 20’ long • 48” - 72” wide
It’s Your Boat, Tell Us What You Want!
just call them standard equipment.
™
™
2
popular custom boat options
Swamp Lights
1000 ft beam / 50 ft flood
Flush Mounted
Pedastal Bases
Navigation Lights
Front / Rear
Electric Motor Mount
Hydraulic
Pedastal
Seats
Wide Gun Box
* Boat shown with custom camouflage paint.
3
Beavertail Blinds
™
are “The
Original Flip Over Blind” and have
numerous exclusive features
that truly set us apart. The only
gunnel to gunnel clearance frame
in the industry, our blind has large
vegetation pockets (not loops),
closable shooting holes and easily
attaches to your boat without
drilling holes, this blind has the
features and
quality you
expect and
demand.
4
Beavertail™ full size boat blinds are designed not only for
exceptional concealment, but also superior functionality.
The blinds attach to your boat with our exclusive telescoping
frame system, which means no holes to drill, and attachment /
detachment is a snap. These blinds provide more than enough
clearance for everyone in the boat no matter which seat you are
in, and are designed to work with both backwater motors and
standard outboards. The blind also lays directly on the side rail which
means unobstructed access to gun boxes and accessories.
The blind exterior features vegetation pockets, more vegetation equals more
concealment! Finally, these blinds also double as a roomy ground blind by
exchanging the attachment arms for the optional accessory stake kit. You can literally go from
boat to field in a matter of minutes. Blinds are available in Mossy Oak® Shadow Grass Breakup®.
Features: Weighs approximately 47 lbs and stands 27” above the gunnels • 500 Denier Cordura with
nylon stitching • Exclusive tool-less telescoping frame and attachment system • Exterior vegetation
pockets • Frame constructed of galvanized steel and marine grade aluminum • Available in 4 sizes
1400 Series Blind: Fits boat 14’ to 15’ long • Top beam width 47” to 59” • Three closable shooting holes
#93460 - Mossy Oak® Shadow Grass® #93458 - Breakup®
1600 Series Blind: Fits boat 15’ to 17’ long • Top beam width 60” to 72” • Three closable shooting holes
#93464 - Mossy Oak® Shadow Grass® #93462 - Breakup®
1800 Series Blind: Fits boat 17’ to 20’ long • Top beam width 72” to 86” • Four closable shooting holes
#93468 - Mossy Oak® Shadow Grass®
#93466 - Breakup®
2200 Series Blind: Fits boat 19’ to 23’ long
• Top beam width 86” to 96”
• Five closable shooting holes
#93474 - Mossy Oak® Shadow Grass®
#93471 - Breakup®
Stealth 1200™ or Stealth 2000™ Boat Blind
At Beavertail™, we know blinds. It all began with “the
Original Flip-Over Blind” which has set the benchmark in the
industry for rapid deploy, fold over boat blinds.
this blind can literally be set up or knocked down
™
in seconds and folds down completely out of the way,
which means no hassling with poles or tucking in extra material. Inside the blind
you will find more than enough head-room for you and a partner to not only sit
™ comfortably, but make the shot when it counts. Features: Fold over aluminum
frame construction • Shooting holes on top and side • Rapid no hassle deployment
or knock down • Roomy interior for you and your gear • Dog doors on both end
• Built in vegetation straps • Available colors and patterns: Mossy Oak® Shadow Grass®
#0775 - Mossy Oak® Shadow Grass® #0752 - Breakup®
1
If you are like most people, you probably didn’t pay a lot of extra
attention in physics class. Luckily for us, the guys in our R&D
department did. Beavertails revolutionary Flotation Pod technology
changes the game forever. To obtain maximum motor
efficiency you need the longest plane possible.
Our Flotation Pods not only increase the plane
of your boat, but also offer up to 200 lbs. of extra flotation.
This extra flotation helps to off-set the negative performance
often associated with the extra weight of a conventional 4-stroke
air-cooled motors. What does this mean for you? How about
getting up on plane faster than you ever have before,
or running through shallow water that bottoms out
competitive boats? These Flotation Pods from
Beavertail™ will truly revolutionize the performance
of your boat and motor.
Sizes
#97100 - Small: for boats with 30” to 42” bottoms
#97164 - Medium: for boats with 44 “ to 48” bottoms
#97165 - Large: for boats with 54” to 96” bottoms
Please call for proper sizing for your specific application
Revolutionary,
New Flotation
Technology!
(Patent Pending)
Features: Up to 200 lbs. of extra flotation. • Eliminates the negative performance
associated with the weight of 4-stroke air-cooled motor. • Eliminates tail drag
associated with shallow water running. Boats float virtually flat and draft
considerably less, giving you almost unlimited capabilities in shallow water.
• Dramatically increases out of the hole take off. • Funnels water to the
propeller in the shallowest of environments, giving you the ability to start out and
get on plane in conditions like you never have before. • Eliminates virtually all transom back
splash. • No longer will you have to worry about over-turning your mud motor; Performance Pods
will act as a stop to help eliminate uncontrolled spins. • Reduces engine laboring. • Reduces fuel
consumption. • Compliments engine power trim. • Engineered not only for strength,
but also can be used as a built-in dog ladder and sitting platform.
* Professional Installation
Recommended for Accessory Kits.
5
Frame geometry? Torsional strength? Drag coefficients? Don’t sweat it, we’ve already
done the math. We’ve spent years perfecting our frames and components through rigorous field
testing, diligent lab work, and most importantly, listening to the feedback from our family of
Beavertail™ owners. Our legendary motors are the 4x4s of boat motors. Our design philosophy has
strayed considerably from the pack, and our refusal to conform is why we set trends instead of
follow them. With models ranging from the lightweight 6 HP to the 40 HP beast, we’ve got
a long shaft backwater motor to suit your application.
Beavertail 6
The lightweight champ
The 6 HP is the smallest in the Beavertail line,
making it the ideal choice for applications where
you want to keep weight to a minimum. But despite
its lightweight status, it delivers big on performance.
Beavertail 20
Straight forward and capable
The 13 Beavertail is a very capable and easy to
operate motor that really delivers. It’s an excellent
motor for small to medium boats, and is also
available in a lightweight aluminum framed
model for use on sneak boats.
The motor that does it all
The 20 HP Beavertail is the perfect all-around
motor.
It’s extremely tough, capable and user friendly,
and it’s also
economical. This makes it a popular choice for
those who don’t
need the extra high horse power, yet are serious
about getting where others can’t.
Beavertail 24
Beavertail 27
Beavertail 13
?
A Little More With Less
The 24 hp power plant provides a bit more power
than our popular Beavertail 20 and weights
4 lbs less. This translates into a slightly better
power to weight ratio.
Battle tested durability and power
The 27 HP Beavertail is known as the
“Iron Horse” because of its legendary toughness
and brute strength. It has proven time and
again that it will get you where you need to go,
and back again.
For more Motor Specifications, see page 21.
swivel system
Beavertail’s Innovative 360°
Swivel Mount (with True Spring Pin
Safety Stops) is another example of applied
owner feedback. When it comes to product development, Beavertail™ is already a leader among
backwater motor manufacturers. In response to a frequent customer request - and extensive
competitive analysis - Beavertail now offers a 360-degree swivel mount with the only true safety
stop on the market.
Beavertail 35
The ultimate in performance
The 35 HP Beavertail is the epitome
of what a Backwater motor should
be. Nothing compares to the
legendary power and durability of
this motor. If you need the ultimate
in speed and backwater capability,
the 35 is for you.
propellers
Performance Series X Propeller
This is the top of the line propeller.
It is specifically designed for the
combination of high speed and
aggressive mud performance.
The Series X propellers are
designed with blades specifically
shaped and negatively raked
to reduce any chance of
weed buildup around the
propeller hub. These props
are standard on all
Beavertail motors.
7
Beavertail has a full line of sneak
boats to match your
hunting style and
pocket book. Whether you are
looking for a lightweight
platform for your backwater motor
or a quiet paddle out to “the spot”,
Beavertail has you covered.
ambush
As its name suggests, this boat is perfect for getting in quick and lying low. The low profile
sleek design make it perfect for navigating the shallows or taking it out on the big water,
and the durable fiberglass composite construction will withstand virtually anything you
can throw at it. Another innovative feature of the Beavertail Ambush™ is the built in transom
with integrated rear flotation pods. The Ambush™ from Beavertail™ is sure to set the standard in
fiberglass sneak boats for years to come.
Features: Durable fiberglass composite construction • Integrated floatation pods • 7 hp motor rating
• Grab handle, removable seat and cockpit cover • Length: 13 feet 10 inches • Weight: Approximately
120 lbs. • Available colors and patterns:
Rear Flotation Pods
#7004 - Marsh Brown #7000 - Grey
and Transom
™
™
8
™
Ambush™ Blind Doors
The flip open accessory blind doors feature an aluminum tube frame,
high strength Mossy Oak® Shadow Grass® cover material, and easily
attaches or detaches from the boat in seconds.
• Solid, easy attach aluminum frame construction
• Durable 600 denier slip on cover material
• Available colors and patterns: #7014 - Mossy Oak® Shadow Grass®
#7010 - Grey
stealth 1200 and 2000
™
™
Beavertails most popular line of sneak boats.
Designed for one person or two, with an optional 2nd seat available. Both boats feature a
twin-hull catamaran style bottom givingthem amazing stability, yet they float in only 4-5 inches of
water! With unmatched stability, the Stealth 1200 and 2000 have been field-tested and granted a
seal of approval by the North American Hunting Club!
Both Feature: 100% Custom Compounded polyethylene construction • 1-Piece , roto-molded
design • Twin-hull, catamaran style bottom for
exceptional stability • Cup & thermos holder
• Non-skid floor • 5-year warranty • Side storage
• Optional additional seat, motormount,
dog ramp, paddle, cover, and oar kit available
Both the Stealth 1200
and Stealth 2000 Feature
Our Twin Hull Catamaran
Style Bottom for
Exceptional Stability.
Stealth 1200
1200 Features: Air-filled inner structure
• Decoy slots on both sides • Single interior gun rack
& shell holder • Contoured seat • Side-Storage
• Water-tight storage compartments,
front & rear • Handles on both ends
1200 Dimensions:
Overall Dimensions: 12’ L x 44” W x 17” D
Cockpit Dimensions: 8’ L x 27” W x 13” D
Weight: 100 LBS
Weight Capacity: 550 LBS (Motor, people, & gear)
Part: #0724 Marsh Brown
Stealth 2000
2000 Features: Foam-filled inner layer • Foam-padded dog platform
• Double interior gun racks & shell holders • 360 degree, cushion swivel
seat with folding backrest • Storage compartment underneath seat to hold a
marine battery • Water-tight storage compartment, rear only • Tie-down
slots, front & rear handles on both ends
2000 Dimensions:
Overall Dimensions: 12’ L x 44” W x 15” D
Cockpit Dimensions: 8’ L x 36” W x 10” D
Weight: 120 LBS
Weight Capacity: 550 LBS (Motor, people, & gear)
Part: #0624 Marsh Brown
Dog Ramp
100% rugged polyethylene construction.
Tough, durable dog ramp hooks on the
handle and swivels up and out of the way!
#0764 - Marsh Brown - One size fits both
the Stealth 1200 and 2000.
9
Final attack
™
The Final Attack is arguably the most versatile sneek boat you
will ever own. With an ultra low profile, this boat flattens out in
extremely short vegetation and has ample room for both you
and your gear. With a built in transom, you can easily attach a
motor for an effortless trip to your destination. With built in low profile
wheels, the Final Attack is also a cinch to move across dry land, and makes
an excellent pit blind or portable field blind.
Features: 100% custom compounded polyethylene construction • 1-Piece , roto-molded unique,
multi-purpose, low-profile design • Foam-filled inner structure front and rear for extra flotation
• Transom for motor - 2hp rating • Molded-in tow rope holes • Wheels for easy transport
• Optional removeable pit cover (sold separately) • 5-year warranty
• Optional BackRest, Pit Cover, and Quick Cover available.
Overall Dimensions:
8’ L x 44” W x 14” D
Cockpit Dimensions:
4’10” L x 26” W x 13” D
Weight: 75 LBS
Weight Capacity:
420 LBS
Part: #0824 - Marsh Brown
Quick Cover
Tough, durable, 900 Denier waterproof
& windproof polyester. Strong & light
aluminum frame. Flip-open doors allow for fast action.
Low-profile disappears in very little cover.
Vegetation straps for easy concealment.
Quickly attaches to your Final Attack
boat / blind.
#0865 - Marsh Brown
Pit Cover
Optional removeable pit / storage
cover for your Final Attack boat /
blind. 100% custom compounded
polyethylene construction.
#0834 Marsh Brown
Snap in Wheels
Makes transporting
boat and gear easy.
™
™
10
Mossy Oak®
Shadow Grass®
BackRest
Custom compounded polyethylene.
Provides day-long back support and
comfort while in your Final Attack
boat / blind. #0844 - Marsh Brown
phantom
™
As a waterfowling kayak, the phantom is purpose built to
overcome the challenges often found when hunting out of smooth
bottomed conventional kayaks. Due to the catamaran style hull,
this platform is extremely stable to support the additional weight
of hunting gear and the extreme lateral movements that accompany
hunting from a kayak, such as shooting your gun or tossing decoys.
Features: 100% custom compounded polyethylene construction
• 1-Piece , roto-molded design • Twin-hull, catamaran style bottom for
exceptional stability • Foam-filled inner structure for incredible strength
• Contoured seat • Molded-in foot rests • Molded-in handles, both ends
• Water-tight storage compartment, rear only • Non-skid floor • 5-year warranty
Overall Dimensions: 9’ L x 32” W x 13” D
Cockpit Dimensions: 6’3” L x 29” W x 9” D
Weight: 55 LBS
Weight Capacity: 360 LBS
Part: #0924 - Marsh Brown
Phantom Features
Our Twin Hull
Catamaran Style Bottom
for Exceptional Stability.
9-FT Paddle
Our 9-Ft Paddle features
removeable ends for easy storage.
#0701 - Black
11
predator
™
If you want the comfort and low profile attributes of a pit blind, but also require
the ablilty to move from spot to spot, the Predator portable pit blind is for you.
Weighing a mere 29 lbs. (or 34 lbs. for the XL) this field is easily dragged from
one set-up to the next, and can hold your gear while transporting. The birds are
going to land where they want, it’s a fact of life, and sometimes the “sweet spot”
is covered by water or mud. Instead of settling for the dry edge, the Predator
allows you to drop right in on the action and stay dry and comfortable all day long.
PREDATOR XCS
PACKAGE
(Includes the #0524
Predator Field Blind
and the #0535 Predator
XCS. Not available for the
#0584 Predator XL Field Blind.)
PREDATOR:
Dimensions: 78” L x 35” W x 11” H Weight: 29 LBS Part: #0524 - Marsh Brown
PREDATOR XL:
(features larger dimensions & roomier shoulder/elbow areas)
Dimensions: 79” L x 42” W x 12” H
Weight: 34 LBS Part: #0584 - Marsh Brown
Storage Space
beneath back rest
for extra gear.
Features: 100% Custom Compounded polyethylene construction • Spring-Loaded Back Rest for
immediate action • Storage Space beneath back rest for
extra gear • Foam-Filled Head Rest • Shoulder and Elbow
areas • Molded-In Compartments in shoulder/elbow areas for
holding smaller items (Predator XL only) • Molded-In
Stabilizing Pockets • Flush-Mounted Shell Holder
• Molded-In Custom Foot Locks • 3-Year Warranty
• Optional Predator XCS (Xtreme Cover System)
• Optional Predator Package (not available for
the Predator XL)
PREDATOR XCS (Extreme Cover System):
(Designed for use on the #0524 Predator & #0584 Predator XL Field Blinds)
PREDATOR
PREDATOR XL
™
™
12
Setup Dimensions: 98” L x 48” W x 8” H
Stored Dimensions: 78” L x 38” W x 8” H Weight: 16 LBS
Pattern: #0535 - Mossy Oak® Shadow Grass®
XCS Features: Extremely durable and waterproof 900 Denier
polyester fabric • Aircraft aluminum square tubing frame....
5-times stronger than
round tubing frames
Mossy Oak®
• Strongest
Shadow
Grass®
frame on the
market • Flip-open lid with 2 openings
& unobstructed view....for you and
your dog • Stubble straps for adding natural
vegetation • Side & end skirting for better concealment
• Easy access flagging holes • 1-Year Warranty
Gunner
™
The new Gunner™ field blind offers all of the premium features
that you have come to expect from Beavertail™, with the added benefit of an
assisted lift backrest, and easy slide locking fold up / fold down modularity.
The patent pending spring loaded backrest features a spring loaded base that
assists as you move up or down, so you can concentrate on lining up the shot and
less on getting into position when it’s “go” time.
Features: Lift assist backrest made of durable polyethylene • Slide lock deployment,
no pins • 600 denier material and durable aluminum frame construction • Waterproof
base • Flagging holes and dual purpose black/grey flagging door flaps • Built in
vegetations straps • Backpack style carry harness • Available patterns:
Mossy Oak® Shadow Grass®, Corn Belt™
#0445 - Mossy Oak® Shadow Grass®
#0448 - Corn Belt™
Mossy Oak®
Shadow Grass®
Corn Belt™
13
Destroyer
™
The innovative modular design of the Destroyer field blind makes it a cinch
to deploy in the field. What really makes this blind stand out is the sled base.
All components easily fold down into the sled with ample room for additional
gear. Instead of carrying it on your back, you have the ability to pull it behind
you, and utilize the sled base to transport decoys, guns, and whatever else you
take with you into the field, minimizing trips back to the truck.
Setup Dimensions: 96” L x 30” W x 17” H
Stored Dimensions: 57” L x 30” W x 6” H
Weight: 23 LBS
Sled Dimensions: 58” L x 30” W x 4” H
Patterns: #0325 - Mossy Oak® Shadow Grass® #0328 - Farmland Cornbelt™
#0329 - Farmland Gold®
Features: Waterproof / windproof 600 Denier polyester body with Polyethylene Sled
Floor • Flip-Open Sides...Large gull-wing doors open instantly for unobstructed movement
• Collapsible aluminum frame sets up in 5 seconds; folds flat for easy transport • Back-rest with
foam seat cushion for all-day shoots • Unique, flip-open dog
door • Zippered gear storage bag & handy 15” see-through
pockets for extra gear • Face shield for total concealment
• Blind allows a full 78” to stretch out comfortably
• Optional Quick Cover & Ghillie Grasses available.
™
™
14
Mossy Oak®
Shadow Grass®
Farmland
Corn Belt™
Farmland
Gold®
i
X Terminator
™
Weighing in at just 14 lbs, this full framed blind from Beavertail™ is easily
transported to your spread with the backpack style carry harness.
This blind can be deployed in seconds, and features a reinforced
polyurethane floor for durable water proof field concealment.
Setup Dimensions: 86” L x 26” W x 16.5” H
Stored Dimensions: 44” L x 26” W x 4” H
Weight: 14 LBS
Patterns: #0305 - Mossy Oak® Shadow Grass®
#0308 - Farmland Cornbelt™ #0309 - Farmland Gold®
Features: Waterproof / windproof 600 Denier polyester body • Tough, waterproof,
reinforced polyurethane floor can take a beating in any condition
• low-profile aircraft aluminum frame • Double, spring-loaded roof flips open for
lightening-fast, unobstructed shooting • Generous cockpit with comfortable back
rest & seat cushions • Sewn-on nylon web vegetation straps for adding
natural cover • Rubber gun rests prevent scuffing & keeps gun “ready”
• Integrated face shield for total concealment
• Zippered dog door for quick & effective dog
concealment & cleaning • Optional Quick Cover
& Ghillie Grasses available
Mossy Oak®
Shadow Grass®
Farmland
Corn Belt™
Farmland
Gold®
15
Comfort Zone
™
Beavertail™ has the most extensive line of frameless field blinds on the
market today, and the pinnacle of that line is found in the Comfort Zone™
(Patent Pending) field blind. This blind takes comfort and function to an entirely
new level with all the features found in the Beavertail™ frameless line-up plus
premium additions that put it over the top. Way over the top. The Comfort Zone™
is the ultimate in all day, all weather waterfowl concealment.
Features: Absolutely no assembly required • Weight: Approximately 14 lbs. • Fully
sealed waterproof base with Cordura® lined interior • Low profile, 600 Denier frameless
construction • Ultra thick beveled foam backrest • Structured foam side walls and door flaps
plus see thru mesh window • Padded backpack carry harness, heavy duty nylon
straps and clips • Vegetation straps and D-rings to carry extra gear
• Gun Sleeve built into backrest for hands free transport • Flagging holes
and dual purpose black/grey flagging door flaps • Available colors
and patterns: Mossy Oak®
Shadow Grass®,
Corn Belt™
™
™
16
Mossy Oak®
Shadow Grass®
#93474 - Mossy Oak® Shadow Grass®
Farmland
Corn Belt™
#93494 - Corn Belt™
Field FOWLER
™
Field testing is a way of life at Beavertail™, and when your day includes multiple
locations and multiple spreads, it doesn’t take long to appreciate minimal, light
weight simplicity. So after years of “on the move” product development, innovation
is born of necessity. Beavertail™ set out to design a unique frameless field blind
that held its shape and was a cinch to hike in and out. The Patented Field
Fowler™ is the perfect blind for the demanding waterfowl hunter who wants the
simplicity of a frameless design with the structure of a conventional field blind.
Features: Absolutely no assembly required • Weight: Approximately 8 lbs. • Low profile,
600 denier frameless construction • Patented ultra comfortable inflatable backrest and
steel gun rest • Structured foam side walls and fully padded interior floor
• Vegetation straps and easy carry handle • Right or left hand
overlapping doors flaps with see thru mesh window
• Available colors and patterns: Mossy Oak®
Shadow Grass®, Farmland™
Mossy Oak®
Shadow Grass®
Farmland
Gold®
#0415 - Mossy Oak®
Shadow Grass®
#0419 - Farmland Gold®
17
sniper
Beavertail™ proudly introduces the new SNIPER™ field blind. This frameless
blind is extremely light weight and portable. With a waterproof base
and built in padded back rest, this blind is all you need for low profile,
moisture resistant concealment. Best of all, this blinds doubles as a gear bag
with amble room for your gun, ammunition, and silhouette decoys. If you are
looking for ultra light, easy carrying, low profile concealment, the SNIPER is
the blind for you.
Features: Absolutely no assembly required • Weight: Approximately 8 lbs
• Light, low profile frameless 600 Denier construction • Built in backrest,
vegetations straps and see through mesh windows • Blind doubles as
decoy/equipment bag • Available color(s): #0424 - Tan
Tan
(shown above)
sniper DelUxe
™
™
18
The SNIPER Deluxe™ field blind from
Beavertail™ has all of the great features
of the original SNIPER™ blind, plus a few bonuses.
The SNIPER Deluxe™ has the same frameless,
moisture resistant design as the original,
but also has a padded seat for those extra
long days in the field. To top it off, the SNIPER
Deluxe™ comes in Mossy Oak® Shadow Grass®
for the ultimate in waterfowl concealment.
Features: Absolutely no assembly required • Weight:
Approximately 8 lbs. • Light low profile frameless 600 Denier Mossy Oak®
construction • Built in backrest, vegetations straps and see Shadow Grass®
through mesh windows • Blind doubles as decoy/equipment
bag • Built in padded seat and concealed storage under backrest
• Available colors and patterns: #0435 - Mossy Oak® Shadow Grass®
If lying on your back in a field blind has lost its appeal for you over the years, the PRO VS hay
bale blinds from Beavertail™ are sure to be a welcomed addition to your field blind arsenal. In
three sizes, you will find more than enough room for chairs, portable heater, and all of that extra
gear. Our bale blinds feature closable see-through mesh windows and shooting
door that make setting up for the shot a piece of cake. With the accessory sled,
getting the blind and your gear out to your spread has never been easier.
2-MAN :
Setup Dimensions: 54” L x 56” W x 55” H
Stored Dimensions: 54” L x 30” W x 4” H
Weight: 23 LBS
Patterns: #0365 Mossy Oak® Shadow Grass®
#0368 Farmland Corn Belt™
#0369 Farmland Gold®
3-MAN :
Setup Dimensions: 68” L x 62” W x 59” H
Stored Dimensions: 68” L x 32” W x 4” H
Weight: 27 LBS
Patterns: #0365 Mossy Oak® Shadow Grass®
#0368 Farmland Corn Belt™
#0369 Farmland Gold®
OUTFITTER:
Setup Dimensions: 75” L x 65” W x 66” H
Stored Dimensions: 75” L x 41” W x 6” H
Weight: 34 LBS
Patterns: #0365 Mossy Oak® Shadow Grass®
#0368 Farmland Corn Belt™
#0369 Farmland Gold®
Mossy Oak®
Shadow Grass®
Farmland
Corn Belt™
Farmland
Gold®
Features: Waterproof / Windproof 600 Denier polyester shell seals out elements • Collapsible
self-storing aluminum frame folds to 4 inches • Patented, aluminum frame roof and hinge system
• Sewn-in “clearview” mesh roof windows with weather flaps • 2” eye-level viewing slots front
and back • Sewn-on vegetation straps on roof & body for camouflaging • Zippered
door on both ends for easy in / out • 1 year warranty • Optional polyethylene sled
base, snow roofs, travel covers, ghillie grass mat, ridge poles and more available.
Haybale Blind Sleds:
#0364 2-man
#0374 3-man
#0384 Outfitter
Haybale Travel Cover:
#0360 2-man
#0370 3-man
#0380 Outfitter
19
beavertail surface drive Motors
ENGINE
DRIvE TRAIN
FRAME
40 hp surface drive
V-Twin Cylinder, Horizontal Shaft,
OHV, Cast Iron Cylinder Liners,
Aluminum Block,
4 Cycle Command PRO
Synchronous Belt Drive, Electric Clutch, Polished,
Ground, Balanced Electroless Plated Drive Shaft
Aircraft Grade Aluminum
Frame and Housing.
35 hp surface drive
35 HP Vanguard
Electric start - performance cam.
Digital spark advance
module. 993cc
Synchronous Belt Drive, Electric Clutch, Polished,
Ground, Balanced Electroless Plated Drive Shaft
Aircraft Grade Aluminum
Frame and Housing.
27 hp surface drive
27 Kohler.
Electric start - performance
cam. Digital spark advance module
27 BHP @ 3600 rpm
Synchronous Belt Drive, Electric Clutch, Polished,
Ground, Balanced Electroless Plated Drive Shaft
Aircraft Grade Aluminum
Frame and Housing.
40 hp long shaft
beavertail long shaft Motors
Available Summer 2009
V-Twin Cylinder, Horizontal Shaft,
OHV, Cast Iron Cylinder Liners,
Aluminum Block,
4 Cycle Command PRO
Patent pending, stainless steel removable bearing
assemblies. Upper and lower stainless removable
caps and housings. Polished, ground, balanced
and electroless nickel plated drive shaft.
Uni-seamless, robotics welded, aluminum frame.
All frame parts CNC milled and laser cut
for alignment accuracy.
35 hp long shaft
35 HP Vanguard
Electric start - performance cam.
Digital spark advance
module. 993cc
Patent pending, stainless steel removable bearing
assemblies. Upper and lower stainless removable
caps and housings. Polished, ground, balanced
and electroless nickel plated drive shaft.
Uni-seamless, robotics welded, aluminum frame.
All frame parts CNC milled and laser cut
for alignment accuracy.
27 hp long shaft
27 Kohler.
Electric start - performance
cam. Digital spark advance module
27 BHP @ 3600 rpm
Patent pending, stainless steel removable bearing
assemblies. Upper and lower stainless removable
caps and housings. Polished, ground, balanced
and electroless nickel plated drive shaft.
Uni-seamless, robotics welded, aluminum frame.
All frame parts CNC milled and laser cut
for alignment accuracy.
24 hp long shaft
24 Honda
Electric start
670 cc
Patent pending, stainless steel removable bearing
assemblies. Upper and lower stainless removable
caps and housings. Polished, ground, balanced
and electroless nickel plated drive shaft.
Uni-seamless, robotics welded, aluminum frame.
All frame parts CNC milled and laser cut
for alignment accuracy.
20 hp long shaft
20 Kohler. Electric start - performance
cam. Digital spark advance module.
20 BHP @ 3600 rpm
Patent pending, stainless steel removable bearing
assemblies. Upper and lower stainless removable
caps and housings. Polished, ground, balanced
and electroless nickel plated drive shaft.
Uni-seamless, robotics welded, aluminum frame.
All frame parts CNC milled and laser cut
for alignment accuracy.
13 hp long shaft
13 Honda
Electric start / Backup pull start
390 cc
Patent pending, stainless steel removable bearing
assemblies. Upper and lower stainless removable
caps and housings. Polished, ground, balanced
and electroless nickel plated drive shaft.
Uni-seamless, robotics welded, aluminum frame.
All frame parts CNC milled and laser cut
for alignment accuracy.
6 hp long shaft
6 HP Kohler
Electric start / Backup pull start
175 cc
Patent pending, stainless steel removable bearing
assemblies. Upper and lower stainless removable
caps and housings. Polished, ground, balanced
and electroless nickel plated drive shaft.
Uni-seamless, robotics welded, aluminum frame.
All frame parts CNC milled and laser cut
for alignment accuracy.
Item #
97191
93301
93335
93336
93303
93337
™
93302
93304
™
20
93338
93348
93349
93305
Description:
Custom Camo Paint
Navigation Lights
(switched front and rear with panel)
Swamp Headlights
(switched 1 spot, 1 flood with panel)
Bilge Pump (switched)
3 Interior Lights (switched)
12 Volt Plug-in
(can be located in front or rear)
Removable Stand Up Bar
Seat Pedestal Bases
(welded into boat floor)
Camouflage Seat
(hydraulic pedestal)
Center Console with Steering
Wheel and Cables
Side Console with Steering
Wheel and Cables
15” Front Deck Extension
Item #
93306
Description:
15” Front Deck Extension
(with storage compartment)
Call for info 28” Front Deck Extension
Call for info 28” Front Deck Extension
(with storage compartment)
Call for info 48” Front Deck Extension
(with or without
storage compartment)
93345
Trolling Motor Mount System
(with wiring and plate)
93315
Wider Gun Box (each)
93346
Live Well in Starboard Wider
Gun Box
91041
10’ Aluminum Push Pole
91048
10’ Push Pole Mounting
System (installed)
93320
Bow Shooting Platform
Call for Quote
PROP
FINISH
High Performance 2 Blade
Stainless Steel
Flat Marine Powder Coat
(Olive Drab), Zinc Rich
Undercoat Primer Powder Coat
262 lbs
Conventional Style Power Tilt and Trim to
Raise Prop and Shaft Above Trailer Plane
High Performance 2 Blade
Stainless Steel
Flat Marine Powder Coat
(Olive Drab), Zinc Rich
Undercoat Primer Powder Coat
262 lbs
Conventional Style Power Tilt and Trim to
Raise Prop and Shaft Above Trailer Plane
High Performance 2 Blade
Stainless Steel
Flat Marine Powder Coat
(Olive Drab), Zinc Rich
Undercoat Primer Powder Coat
230 lbs
Conventional Style Power Tilt and Trim to
Raise Prop and Shaft Above Trailer Plane
Performance Series prop.
Stainless steel with cad/cam computer
technology for precision accuracy.
Super weedless, heavy cupped.
Flat marine powder coat
(Olive Drab). Zinc rich
undercoat primer powder coat
225 lbs
Tailshaft swings into the boat. Exclusive 360-degree
swivel with true safety stop spring pin.* Rubber mounted,
engine adjustment bolts for motor trimming capabilities
Performance Series prop.
Stainless steel with cad/cam computer
technology for precision accuracy.
Super weedless, heavy cupped.
Flat marine powder coat
(Olive Drab). Zinc rich
undercoat primer powder coat
220 lbs
Tailshaft swings into the boat. Exclusive 360-degree
swivel with true safety stop spring pin.* Rubber mounted,
engine adjustment bolts for motor trimming capabilities
Performance Series X 9x6 or 9x7 prop.
Stainless steel with cad/cam computer
technology for precision accuracy.
Super weedless, heavy cupped.
Flat marine powder coat
(Olive Drab). Zinc rich
undercoat primer powder coat
174 lbs
Tailshaft swings into the boat. Exclusive 360-degree
swivel with true safety stop spring pin.* Rubber mounted,
engine adjustment bolts for motor trimming capabilities
Performance Series X, 9 x 7 prop.
Stainless steel with cad/cam computer
technology for precision accuracy.
Super weedless, heavy cupped.
Flat marine powder coat
(Olive Drab). Zinc rich
undercoat primer powder coat
170 lbs
Tailshaft swings into the boat. Exclusive 360-degree
swivel with true safety stop spring pin.* Rubber mounted,
engine adjustment bolts for motor trimming capabilities
Performance Series X 9x5 prop
Stainless steel with cad/cam computer
technology for precision accuracy.
Super weedless, heavy cupped.
Flat marine powder coat
(Olive Drab). Zinc rich
undercoat primer powder coat
174 lbs
(approx)
Tailshaft swings into the boat. Exclusive 360-degree
swivel with true safety stop spring pin.* Rubber mounted,
engine adjustment bolts for motor trimming capabilities
Performance Series X 8x4 prop.
Stainless steel with cad/cam computer
technology for precision accuracy.
Super weedless, heavy cupped.
Flat marine powder coat
(Olive Drab). Zinc rich
undercoat primer powder coat
Std 145 lbs.
Alum 125 lbs
Tailshaft swings into the boat. Exclusive 360-degree
swivel with true safety stop spring pin.* Rubber mounted,
engine adjustment bolts for motor trimming capabilities
Performance Series X 7x4 prop.
Stainless steel with cad/cam computer
technology for precision accuracy.
Super weedless, heavy cupped.
Flat marine powder coat
(Olive Drab). Zinc rich
undercoat primer powder coat
70 lbs
Tailshaft swings into the boat. Exclusive 360-degree
swivel with true safety stop spring pin.* Rubber mounted,
engine adjustment bolts for motor trimming capabilities
Item #
93365
93322
93358
93323
93316
93360
93324
91210
93361
93326
93328
91066
93381
93321
93356
Description:
Bow Shooting Platform
(36” x 62”)
Battery
Battery box
Set-back Plate
20” Transom
Removable Transom Riser
Fuel Tank
Dog Ladder
Stake-off Loops (each)
Ice Breaker Corner Guards
28” Sidewalls for 48” - 60”
Keels (each)
.125 Gauge Bottom
(must have if ordered without Keels)
Winch Bracket and Wiring Harness
(mounted on front of boat)
Warn Works 3700 Winch
(winch, remote control, fairlead roller)
WGT.
(approx)
(approx)
(approx)
(approx)
(approx)
(approx)
Item #
97100
97164
97165
$179.00
TRAILERING
?
Description:
Performance Pods - Small
(Fits 14’, 15’, and 16’ boats)
Performance Pods - Medium
(Fits 17’ and 18’ boats)
Performance Pods - Large
(Fits 20’ boats)
Trailer (galvanized, 1,500 pound capacity,
rubber roller guide-ons, jack stand)
Trailer (galvanized, 2,450 pound capacity,
rubber roller guide-ons, jack stand)
for 18’ x 60” and 20’ boats
Teflon Strips (Pair) on trailer bunks
(.5” x 3 “ x 8’)
Skid Plate / Axle Protector
Break-away Tongue
Spare Tire and Mount
21