LED Downlights,
Spotlights & Accessories
The LED Lighting Experts
Nov 2015 - V6.2
Manufacturers of NZ’s No.1 LED lighting solutions.
INDEX
About us
In 2008, two men began working together with a
dream of designing and manufacturing quality LED
products in New Zealand.
With Jon Maunsell’s background in electronics, and
the mechanical engineering skills of Gerard Woods,
they gathered a local production team of dedicated
individuals to help bring the dream to fruition.
Since then it has been a steady progression of
researching and developing superior lighting
products designed for the New Zealand
environment.
What light do you put in sloping ceilings, for
highlighting artwork, for extra energy efficiency,
for bedrooms, for low glare?
Switch Lighting are proud to be New Zealand’s
leading LED luminaire manufacturers, and believe
in providing a quality product that they guarantee
to be kinder on the earth and save the consumer in
their lighting costs.
These lights are designed to be used together.
They share the same aesthetic design and, importantly,
are very consistent in their light colour and spectral
distribution.
Switch Lighting... sustainable LED solutions
So, what is the difference
between a D-LIGHTZ and an
E-LIGHTZ?
2014
Winner of Product Award at IES ANZ
2014 Lighting Design awards
1st NZ Company to manufacture and
patent a fully sealed tilt luminaire
Rebrand of visual identity
2013
Winner of Innovation Award at Nelson
Tasman Chamber Business awards 2013
1st NZ Company to achieve Energy Star
accreditation
Move to new premises in Bolt Road
2012
1st NZ Company to achieve IC-F
classification 2012
2009
Switch Lighting founded, and becomes
the 1st NZ company to manufacture
LED lights in 2009
2008
Jon and Gerard first start working on
LED products together in 2008
2003
Jon designs and maufactures his first
LED light in 2003
1997
Jon first investigates LED lighting
1993
2
How do you decide which light
is best for what situation in
your home or workplace?
Switch Lighting can solve your lighting problems with
its family of matching luminaires in the D-LIGHTZ and
E-LIGHTZ range, designed to complement each other
throughout your home or workplace.
Well, D-LIGHTZ are directional luminaires with 20,
40 and 60-degree beam angles for highlighting and
creating moods whereas the E-LIGHTZ are all-purpose
lights with a wide 110-degree beam angle for general
lighting.
Tilts, low glare, energy reduction, low power, general
purpose – the variances in each D and E-LIGHTZ range
in this family of luminaires will allow you to create
atmospheres that suit the particular purpose of every
room in your home
This catalogue explains the unique characteristic of
each light in the range and how it can be used to full
effect in each situation.
Code
Description
Page
About Us & introduction2
Index3
SL111TD-LIGHTZ Tilt Downlight 4
SL111LG
D-LIGHTZ Low Glare Downlight
6
SL40E-LIGHTZ Downlight8
SL40-LP
E-LIGHTZ Low Power Downlight
8
SL35
E-LIGHTZ Mini Downlight
10
SL35-LP
E-LIGHTZ Low Power Mini Downlight
10
SL40SD
E-LIGHTZ Sunset Dimming Downlight
12
SL204Spot-LIGHTZ14
SL41Multi-LIGHTZ 16
SL201Mini-LIGHTZ18
L05400Luzern LED module20
L05405Luzern PIR Motion Sensor20
L05300
Luzern Series - Rectangular and Round Plates
21
L05310
Lugo Recessed Wall Light 22
L05340
Lupo Recessed Wall Light 22
L05430
Luxi Recessed Wall Light 22
L05420Luxor LED Module23
L05410Lugano 2.3W LED Module23
Drivers24
GLOSSARY & FAQ’S26
Nichia Engineer Shuji Nakamura
invents the first high brightness
white LED in 1993
3
SL111T
D-LIGHTZ
SL111T
Downlight - tiltable and dimmable
Trust NZ
Designed and
Manufactured
D-LIGHTZ
Colour
8W
700 Lumen
2700K, 3000K
or 4000K
Function and use
Size
Ø100 x 45mm
Beam
Angles
Tilt
Angle
20° 40° 60°
26° on 360°
gimbal
specifications
trim colour
Colour temp
2700K, 3000K or 4000K
Type
Tilting Full Gimbal Downlight
Dimming
Yes
Dimensions
100mm x 45mm
Min hole depth
50mm
Driver (included)
SL180D - 180mA dimming
Driver covered
No
LED power
6.5W
Luminaire power*
8.2W
Efficacy*
87 Lm/w
PF
0.95
CRI
83
Luminaire output*
712 Lumens
IP rating
IP20 (IP44 optional)
Beam angle
60° / 40° / 20°
Trim colours
White / Silver / Black
Cutout
83mm - 92mm
Classification
IC-F
Expected life (L70)
60,000 hours
Replaces
Any halogen up to 50W with equal or
better results
HCB & SCB
0mm
D-LIGHTZ
IES - Illuminating Engineering Society
of Australia and New Zealand Ltd
White
SL111T-xx-xx-W
Silver
SL111T-xx-xx-S
Black
SL111T-xx-xx-B
dimensions
*Specifications are given for the 3000K colour. Specifications for other
colours may differ slightly
light levels
∅83-92
2700K
IP20
IP44 Option
3000K
The D-LIGHTZ TILT won an Award of Commendation
in 2014 from IES Aus/NZ, for its patent-approved, clever
thermal dissipation technique.
The D-LIGHTZ Tilt comes in 60, 40 or 20° beam angles
and CCT of 2700K, 3000K or 4000K. It has a standard
configuration of 83CRI with options of increasing this
to 97ra.
It’s the only true IC-F, Zero-rated tilt light currently
available and its IC-F classification and Zero rating
means it can be used anywhere without compromising
the thermal performance of your building.
60° Beam
Angle
2700K
819 lux
856 lux
896 lux
1m
204 lux
215 lux
225 lux
2m
Ø2m
103 lux
107 lux
112 lux
3m
Ø3m
2700K
This is the ideal light for recessing into sloped ceilings,
high-lighting artwork and other general lighting
applications.
4000K
3000K
4000K
Ø1m
3000K
4000K
40° Beam
Angle
1224 lux 1280 lux 1341 lux
1m
Ø0.73m
306 lux
321 lux
335 lux
2m
Ø1.46m
154 lux
160 lux
168 lux
3m
Ø2.19m
20° Beam
Angle
2537 lux 2653 lux 2781 lux
1m
Ø0.35m
634 lux
664 lux
695 lux
2m
Ø0.70m
317 lux
332 lux
348 lux
3m
Ø1.05m
insulation & drivers
Dimming drivers are
compatible with many
common dimmers and
control systems. please
refer to our specification
sheet for details.
adapter plate (option)
to retrofit an oversized old style recessed luminaire.
Insulation
INSULATION SAFE
NO HEAT LOSS
Insulation safely wraps over
D-LIGHTZ - Tilt tested and approved
Fully sealed product. Prevents air
flow and heat loss from living space
SCB & HCB = 0
DIMMABLE DRIVER
Can be used in any room in any
position. Can abut timber and
flammable building elements
Excellent smooth flicker-free dimming
WARRANTY
155mm diameter (100 – 140mm diameter hole)
SL111T-SUP-W (W=white), SL111T-SUP-S (S=silver),
SL111T-SUP-B (B=Black)
how to specify
eg. code = SL111T-60-40-W-IP (no IP suffix = IP20)
Product
Beam
Colour Temp K
Trim Finish Colour IP Rating
SL111T
60 = 60°
40 = 40°
20 = 20°
27 = 2700K
30 = 3000K
40 = 4000K
W = White
S = Silver
B = Black
IP = IP44
= IP20
5 years downlight, 3 years driver
4
5
Low Glare
D-LIGHTZ SL111LG
D-LIGHTZ Low Glare
SL111LG
Downlight - low glare and dimmable
specifications
Trust NZ
Designed and
Manufactured
D-LIGHTZ
8W
Colour
700 Lumen
2700K, 3000K
or 4000K
Size
Ø100 x 47mm
Beam
Angles
The D-LIGHTZ LG comes in 60, 40 or 20° beam angles
and CCT of 2700K, 3000K or 4000K. It has a standard
Colour temp
2700K, 3000K or 4000K
Type
Low Glare Downlight
Dimming
Yes
Dimensions
100mm x 47mm
Min hole depth
50mm
Driver (included)
SL180D - 180mA dimming
Driver covered
No
LED power
6.5W
Luminaire power*
8.2W
Efficacy*
87 Lm/w
PF
0.96
CRI
83
Luminaire output*
712 Lumens
IP rating
IP44
Beam angle
60° / 40° / 20°
Trim colours
White / Silver / Black
Cutout
83mm - 92mm
Classification
IC-F
Expected life (L70)
60,000 hours
Replaces
Any halogen up to 50W with equal or
better results
HCB & SCB
0mm
Silver
SL111LG-xx-xx-S
Black
SL111LG-xx-xx-B
dimensions
Low Glare
IP44
20° 40° 60°
light levels
2700K
3000K
Classified as IC-F, your insulation can safely abut and
cover the luminaire. As it is fully sealed, there will be
absolutely no heat loss from your living space into the
attic or roof void.
60° Beam
Angle
2700K
907 lux
950 lux
994 lux
1m
227 lux
238 lux
249 lux
2m
Ø2m
113 lux
119 lux
124 lux
3m
Ø3m
2700K
configuration of 83CRI with options of increasing this
to 97ra.
4000K
3000K
4000K
Ø1m
3000K
4000K
∅83-92
40° Beam
Angle
1296 lux 1357 lux 1420 lux
1m
Ø0.73m
324 lux
339 lux
355 lux
2m
Ø1.46m
162 lux
170 lux
178 lux
3m
Ø2.19m
20° Beam
Angle
3401 lux 3562 lux 3728 lux
1m
Ø0.35m
850 lux
891 lux
932 lux
2m
Ø0.70m
425 lux
445 lux
466 lux
3m
Ø1.05m
insulation & drivers
Dimming drivers
are compatible
with many common
dimmers and control
systems. Please refer
to our specification
sheet for details.
adapter plate (option)
to retrofit an oversized old style recessed luminaire.
Insulation
INSULATION SAFE
NO HEAT LOSS
Fully sealed product. Prevents air
flow and heat loss from living space
SCB & HCB = 0
155mm diameter (100 – 140mm diameter hole)
SL111T-SUP-W (W=white), SL111T-SUP-S (S=silver),
SL111T-SUP-B (B=Black)
how to specify
Insulation safely wraps over
D-LIGHTZ - Low Glare tested
and approved
Can be used in any room in any
position. Can abut timber and
flammable building elements
6
White
SL111LG-xx-xx-W
*Specifications are given for the 3000K colour. Specifications for other
colours may differ slightly
Function and use
The D-LIGHTZ LOW GLARE is the perfect downlight
for general home illumination in our unique climate.
Designed to minimise glare, this product can be used
in conjunction with the D-LIGHTZ TILT as these two
products share the same trim profile.
trim colour
DIMMABLE DRIVER
Excellent smooth flicker-free dimming
WARRANTY
eg. code = SL111LG-60-40-W
Product
Beam
Colour Temp K
Trim Finish Colour
SL111LG
60 = 60°
40 = 40°
20 = 20°
27 = 2700K
30 = 3000K
40 = 4000K
W = White
S = Silver
B = Black
5 years downlight, 3 years driver
7
Low Power
SL40LP
Downlight - with or without dimmable driver
specifications
SL40 non-covered driver
SL40 coverable
driver 300mA version - A 260mA version - B
2700K, 3000K or 4000K 2700K, 3000K or 4000K
Wide Angle
Wide Angle
Downlight
Downlight
Yes
Yes
Dimming
130mm x 40mm
130mm x 40mm
Dimensions
37mm
37mm
Min hole depth
SL260D - 260mA
Driver (included) SL300D - 300mA
dimming
dimming
NO
YES
Driver covered
10.5W
9.2W
LED power
11.3W
Luminaire power* 12.3W
84 Lm/w
82 Lm/w
Efficacy*
0.9
0.9
PF
83
83
CRI
930 Lumens
Luminaire output* 1030 Lumens
IP44
IP44
IP rating
110°
110°
Beam angle
White/Silver/Black White/Silver/Black
Trim colours
100mm - 120mm
100mm - 120mm
Cutout
IC-F
IC-F
Classification
60,000 hours
Expected life (L70) 60,000 hours
Traditional 100W downlight
Replaces
0mm
0mm
HCB & SCB
Colour temp
Type
Trust NZ
Designed and
Manufactured
trim colour
SL40LP
160mA version-LP
2700K, 3000K or 4000K
Wide Angle
Downlight
No
130mm x 40mm
37mm
SL160 - 160mA
non-dimming
NO
6.5W
7.7W
68 Lm/w
0.55
83
522 Lumens
IP44
110°
White / Silver / Black
100mm - 120mm
IC-F
60,000 hours
50W downlight
0mm
White
SL40W
SL40
SL40 and SL40LP Low Power
Silver
SL40S
Black
SL40B
*Specifications are given for the 3000K colour. Specifications for other colours may differ slightly.
light levels
SL40 Version - A
2700K
8-12W
500-1000 Lumen
Colour
2700K, 3000K
or 4000K
Size
Ø130 x 40mm
Beam
Angle
IP44
3000K
4000K
SL40 Version - B
110° - 300mA
2700K
378 lux
400 lux
350 lux
1m
94 lux
100 lux
87 lux
2m
Ø3m
47 lux
50 lux
44 lux
3m
Ø5m
Ø2m
3000K
4000K
SL40 Version - LP
110° - 260mA
349 lux
370 lux
323 lux
1m
87 lux
93 lux
81 lux
2m
Ø3m
44 lux
46 lux
40 lux
3m
Ø5m
Ø2m
2700K
3000K
4000K
110° - 160mA
210 lux
220 lux
230 lux
1m
Ø2m
53 lux
55 lux
58 lux
2m
Ø3m
26 lux
28 lux
29 lux
3m
Ø5m
110°
insulation & drivers
Function and use
Designed to replace the 100W incandescent recessed light,
this product makes the perfect retrofit to reduce energy
consumption by a whopping 88 percent!
The SL40LP is identical in looks to the standard SL40.
This lower powered version with reduced light output,
is perfect for where brighter light is not necessary.
Because the wide beam angle has a high 1000 lumen
output, it means that, if you are building new, fewer
luminaires are required than with traditional fittings.
The E-LIGHTZ LOW POWER is perfect for bedrooms,
hallways and closet rooms because it is designed for
minimal running costs and maximum mood.
Dimming drivers
are compatible
with many common
dimmers and
control systems.
please refer to our
specification sheet
for details.
Insulation
Insulation
The Version-B driver can be covered with insulation
INSULATION SAFE
NO HEAT LOSS
Insulation safely wraps over
E-LIGHTZ - tested and approved
Fully sealed product. Prevents air flow
and heat loss from living space
SCB & HCB = 0
DIMMABLE DRIVER
Can be used in any room in any
position. Can abut timber and
flammable building elements
Excellent smooth flicker-free dimming
LOW PROFILE
WARRANTY
5 years downlight, 3 years driver
Version A and LP drivers must be installed above insulation
dimensions
∅100-120
how to specify eg. code = SL40W-110-27-1-A
8
Product
Trim Finish
Colour
Beam
Colour Temp K
SL40
W = White
S = Silver
B = Black
110 = 110° 27 = 2700K
30 = 3000K
40 = 4000K
Type
Version
A = 300mA
1=
downlight B = 260mA
LP = Low
Power
adapter plate (option)
to retrofit an oversized old style recessed luminaire.
155mm diameter (100 – 140mm diameter hole)
SL40-SUP-W (W=white), SL40-SUP-S (S=silver), SL40SUP-B (B=Black)
9
Low Power
SL35LP
Mini
SL35 and SL35LP Low Power
specifications
Mini
Trust NZ
Designed and
Manufactured
100 Degrees
2700K, 3000K or 4000K
White / Silver / Black
Wide Angle Downlight
Yes
100 Degrees
2700K, 3000K or 4000K
White / Silver / Black
Wide Angle Downlight
No
Dimensions
Tilt
Min hole depth
Driver (included)
Ø100mm OD x 47mm H
None
50mm
SL180D
Ø100mm OD x 47mm H
None
50mm
SL160
Driver current
180mA
160mA
Driver covered
LED power
Luminaire power*
Efficacy*
PF
No
6.5W
8.2W
87 lm/W
0.96
No
5.7W
7W
78 l/m/W
0.6
CRI
Luminaire output*
IP rating
Cutout
Classification
Expected life (L70)
Replaces
HCB & SCB
83
712 lumen
IP44
82-92mm
IC-F
60,000 hours
75w
0mm
83
560 lumen
IP44
82-92mm
IC-F
60,000 hours
65w
0mm
560 or 700 Lumen
2700K, 3000K
or 4000K
Size
Ø100 x 47mm
Beam
Angle
IP44
100°
Function and use
These wide-angled general-purpose E-LIGHTZ mini downlights
are designed to replace the 75W (E-LIGHTZ mini) and 60W
(E-LIGHTZ mini low power) incandescent lightbulbs.
Sharing the same trim profile as the D-LIGHTZ series, they
are ideal for general illumination in hallways, bathrooms
and bedrooms.
White
SL35W
Silver
SL35S
Black
SL35B
*Specifications are given for the 3000K colour. Specifications for other
colours may differ slightly
dimensions
light levels
SL35
Colour
trim colour
SL35SL35LP
Beam angle
Colour temp
Trim colours
Type
Dimming
2700K
7W or 8W
3000K
4000K
SL35LP
100° Beam
Angle
2700K
288 lux
302 lux
316 lux
1m
Ø2m
72 lux
76 lux
79 lux
2m
Ø3m
36 lux
38 lux
40 lux
3m
Ø5m
3000K
4000K
100° Beam
Angle
233 lux
244 lux
255 lux
1m
Ø2m
58 lux
61 lux
64 lux
2m
Ø3m
29 lux
31 lux
32 lux
3m
Ø5m
Ø 82-92
insulation & drivers
Its IC-F classification, fully sealed and zero clearance to
building elements, means this light will not compromise
the thermal performance of any home.
SL35
Downlight - with or without dimmable driver
The SL35 Driver must
be installed above
insulation
Insulation
INSULATION SAFE
NO HEAT LOSS
Insulation safely wraps over
E-LIGHTZ - tested and approved
Sealed design stops chimney effect
causing heat loss from the room
SCB & HCB = 0
DIMMABLE DRIVER
Can be used in any room in any
position. Can abut timber and
flammable building elements
Standard dimming
WARRANTY
5 years downlight, 3 years driver
how to specify
adapter plate (option)
eg. code = SL35-30-W-LP
10
to retrofit an oversized old style recessed luminaire.
Product
Colour Temp K
Trim Finish Colour
Version
SL35
27 = 2700K
30 = 3000K
40 = 4000K
W = White
S = Silver
B = Black
= Standard Power
LP = Low Power
155mm diameter (100 – 140mm diameter hole)
SL111T-SUP-W (W=white), SL111T-SUP-S (S=silver),
SL111T-SUP-B (B=Black)
11
SL40SD
Sunset Dimming
SL40SD
Downlight - wide angle with sunset dimming
specifications
trim colour
Colour temp
Full brightness 3000K - Dimmed power 2000K
Type
Downlight
Dimming
Yes
Dimensions
130mm x 40mm
Min hole depth
37mm
Driver (included)
SL300D
Driver covered
No
LED power
10.8W
Luminaire power*
13.4W
Efficacy*
52 L/W
PF
0.96
Sunset Dimming
Designed and
Manufactured
Silver
SL40S
CRI (Colour Rendering Index)
92
Luminaire output
700 Lumen
IP rating
IP44
Beam angle
110°
Trim colours
White / Silver / Black
Cutout
100mm - 120mm
Classification
IC-F
Extpected life (L70)
60,000 hours
Replaces
Traditional 75W downlight
HCB & SCB
0mm
*
Trust NZ
White
SL40W
Black
SL40B
*Specifications are given for the 3000K colour. Specifications for other
colours may differ slightly.
dimensions
light levels
110° - 300mA
13W
Colour
700 Lumen
Variable by
dimming
2000K - 3000K
Size
Ø130 x 40mm
Beam
Angle
IP44
110°
Function and use
Imagine a room where you can change from general
downlighting to beautiful warm mood lighting in an instant.
The E-LIGHTZ SL4OSD is a perfect downlight for general
room lighting situations, but also where mood lighting is
a priority. As you dim the light, its colour emulates that of
300 lux
1m
Ø2m
75 lux
2m
Ø3m
37 lux
3m
Ø5m
∅100-120
insulation & drivers
the sun going down, the dimmer it goes the warmer and
softer the glow. Combined with its high light quality CRI
rating (Colour Rendering Index) - reflecting colours more
naturally, you have excellent mood lighting where and
when you need it.
Insulation
Version A and LP drivers must be installed above insulation
Full
brightness
Dimmed
power
INSULATION SAFE
NO HEAT LOSS
Insulation safely wraps over
E-LIGHTZ - tested and approved
Fully sealed product. Prevents air flow
and heat loss from living space
SCB & HCB = 0
DIMMABLE DRIVER
Can be used in any room in any
position. Can abut timber and
flammable building elements
Excellent smooth flicker-free dimming
LOW PROFILE
WARRANTY
5 years downlight, 3 years driver
SL300D dimming driver is compatible with: PDL universal and trailing
edge; Clipsal universal and trailing edge; HPM trailing edge; C-bus
universal; Clipsal Saturn series; Control4 modular dimmers, Legrand
EM400A3P, EM450UP
12
adapter plate (option)
to retrofit an oversized old style recessed luminaire.
155mm diameter (100 – 140mm diameter hole)
SL40-SUP-W (W=white), SL40-SUP-S (S=silver), SL40SUP-B (B=Black)
how to specify eg. code = SL40W-SD
Product
Trim Finish Colour
Type
SL40
W = White
S = Silver
B = Black
SD = Sunset Dimming
13
SL204
SL204 Spike or Surface Mount
4W Spot Light - wide or narrow beam
trim colour
specifications
Variant
350mA
Colour temp
2700K
Type
Spot Light
Dimming
Yes (optional with L05021)
Dimensions
Ø44mm x 84mm
Driver
350mA ordered separately
L05020D - Non-dimming 1-2 units
L05021 - Dimming 1-2 units
Luminaire power
4.1W
Efficacy
68 Lm/W
CRI
83
Luminaire output
280 Lumens
IP rating
IP67
Beam angle
30° / 10°
Trim colours
Natural Anodise / Black Anodise
Mount options
Spike Mount (SL204-xx-SP-xx)
Surface Mount (SL204-xx-SM-xx)
Replaces
20W Halogen Spot
Alloy Natural Annodise
Alloy Black Annodise
Spike Mount
SL204-xx-SP-NA
Spike Mount
SL204-xx-SP-B
Surface Mount
SL204-xx-SM-NA
Surface Mount
SL204-xx-SM-B
dimensions
light levels
Trust NZ
SL204
4W
Colour
Size
280 Lumen
2700K
Ø44 x 84mm
Beam
Angles
IP67
2700K
30° Wide Angle
2700K
400 lux
1m
Ø0.55m
100 lux
2m
Ø0.07m
50 lux
3m
Ø1.60m
10° Narrow Angle
3600 lux
1m
Ø0.18m
900 lux
2m
Ø0.35m
450 lux
3m
Ø0.52m
∅12
100
83
∅44
Designed and
Manufactured
30° 10°
86
how to specify
Function and use
eg. code = SL204WASP
It comes with a wide or narrow beam – choose 10° or
30° beam angle – and is available as surface or spike
mounted according to your need.
Product
Beam
SL204
NA = 10°
Narrow angle
WA = 30° Wide angle
Trim Finish Colour
B
= Natural Anodise
= Black Anodise
Mounting
SP = Spike
SM = Surface
Mount
218
The adjustable head on this 4W spotlight makes it easy
to set up desired lighting for indoors or out and is perfect
for highlighting those larger plants, shrubs, trees, statues
in your garden, or walls and objects of interest inside
your home.
LO5020
LO5021
12/24VDC
Driver
230V
Non-dimming Driver
230v
Dimming Driver
24
RCD2435
53
drivers
∅50
14
15
SL41
SL41
1.6W Multi Light - wide angle / narrow angle / eyelid
trim options
specifications
Colour temp
2700K
Type
Mini Spotlight
Dimming
No
Dimensions
Ø40mm x 40mm deep
Min hole depth
40mm
Cutout
Ø32mm
Driver (inbuilt)
Required 12VDC input from a
transformer is ordered separately and
depends on the number of lights:
1-11 Lights = transformer Q4-12V-20W
1-21 Lights = transformer Q4-12V-36W
Luminaire power
1.6W (130mA @ 12VDC)
CRI
85
Luminaire output
100 Lumens
IP rating
IP67
Beam angle
90° / 70° / Eyelid
Trim colours
316 Stainless Steel
Classification
IC-F
Stainless Steel
SL41SS-EL-27-2-V
SL41SS-90-27-2-V
Trust NZ
Designed and
Manufactured
SL41SS-70-27-2-V
light levels
2700K
90° Wide Angle
32 lux
1.6W
Colour
Size
100 Lumen
2700K
Ø40 x 40mm
Beam
Angles
2m
Ø4.0m
4 lux
3m
Ø6.0m
IP67
70° 90° and eyelid
With an outside diameter of only 40mm this product is small and
discreet and, at only 1.6W, running this light for six hours every
night of the year will cost less than $1!
Featuring a rather clever onboard driver unit, it allows 12VDC
wiring direct in, so wiring is in the standard parallel format.
Ø2.0m
8 lux
66 lux
1m
Ø1.4m
16.6 lux
2m
Ø2.8m
8.2 lux
3m
Ø4.2m
dimensions
transformers
Function and use
The MULTI-LIGHTZ range is named for its ability to have several
different lens options. It’s ideal for lighting not only indoor stairs
and hallways, but outdoor pathways, decks or step lighting.
1m
70° Narrow Angle
2700K
Q4-12V-20W (IP20)
OVER VOLTAGE and REVERSE POLARITY PROTECTION
Clever electronics protects the LED
INBUILT DRIVER - Requires a 12VDC input - parallel wired.
Required 12VDC input from a transformer is ordered separately
and depends on the number of lights:
1-11 Lights = transformer Q4-12V-20W
1-21 Lights = transformer Q4-12V-36W
LED LIGHT ENGINE – Multiple head finishing trims are available.
1-11 Lights in parallel
Q2-12V-36W (IP67)
1-21 Lights in parallel
How to Specify eg. code = SL41SS-70-27-2-V
16
Product
Code
Trim Finish
SL41
SS Stainless
Steel
Beam
Colour
Type
Input
27 = 2700K
2=
outdoor
V=12VDC
Temp K
70 = 70°
90 = 90°
EL=eye lid
17
SL201
SL201
1W Mini-Spot Light
specifications
Trust NZ
trim colour
Colour temp
2700K or 4000K
Type
Mini-Spot Light
Dimming
Yes - minimum
of 3 in circuit and
select dimming
driver L05021
Dimensions
Ø20mm x 36mm deep
Min hole depth
40mm
Driver
350mA driver ordered separately - see
above
Driver covered
No
LED power
1W
CRI
85
Luminaire output
90 Lumens
IP rating
IP67
Beam angle
70° (wide) / 30° (focused)
Trim colours
Alloy Natural Anodise / Black Anodise
Cutout
Ø16mm
(Friction fit)
Classification
IC-F
Alloy Natural Annodise
Alloy Black Annodise
Friction Fit - SL201
Friction Fit - SL201-B
With Spring Mount - SL201SPR
With Spring Mount - SL201SPR-B
No - select
non-dimming
driver L05020
mount accessories
Ø20mm
(Spring Mount)
Designed and
Manufactured
light levels
70° Beam Angle
1W
Colour
Size
90 Lumen
2700K or 4000K
20mm
Function and use
At only 1W and ø20mm, the MINI-LIGHTZ is tiny but
mighty, with this little unit putting out a nice, warm
bright light. It is super economical too; a 1W light running
10 hours a night, every night, will cost less than $1 to run
for the year!
Great for use outdoors for pathway and garden lighting,
recessing into soffits, decking and balustrades, it can be
mounted into handrails, garden beds, or placed inside
Beam
Angles
IP67
30° 70°
the house to illuminate hallways, stairways, artwork and
cabinets. Applications for this product are limited only by
your imagination.
Multiple LEDs can be run off one driver with a standard
L05020 driver running up to nine MINI-LIGHTZ units.
You can friction fit the MINI-LIGHTZ into timber with
a ø16mm hole, or use the spike accessory to place them
around the garden, pathway or driveway.
30° Focused Beam Angle
32 lux
1m
Ø1.40m
8 lux
2m
Ø2.80m
3.5 lux
3m
Ø4.20m
150 lux
1m
Ø0.55m
37 lux
2m
Ø1.07m
19 lux
3m
Ø1.60m
Washer for recessing
in concrete - SL303
Washer for recessing in
concrete - SL303-B
Spike Mount - SL201SP
Spike Mount - SL201SP-B
dimensions
how to specify
eg. code = SL201SPR
Product
code
Beam
Angle
SL201
F
= 70°
= 30°
Mounting
= Friction
Fit
SPR = Spring
Mounting
Trim Finish Colour
B
= Natural Anodise
= Black Anodise
Colour
Temp K
= 2700K
40 = 4000K
how to specify mounting & drivers
18
Mounts and washers
Drivers
SL201SP = Spike Mount
SL303 - Washer Ø30mm
RCD2435 = 12/24VDC Driver
L05020 = 230V Non-dimming Driver
L05021 = 230v Dimming Driver
SL201F
Friction Fit
SL201FSPR
Spring Mount
19
specifications
The Luzern LED spot (module only) features a rotation angle of
45°, and is available in 3 different LED light colours.
light levels
4000K
5700K
35°
657 lux
789 lux
920 lux
1m
Ø0.63m
164 lux
197 lux
230 lux
2m
Ø1.26m
73 lux
88 lux
102 lux
3m
Ø1.89m
2900K
LUZERN Rectangular & Round Plates
Square Plate - one spot, 80 x 80mm - L05300S1
Round Plate - one spot, Ø80mm - L05300R1.80
(plate only)
(plate only)
2.3W
Luminaire output
150-210 Lumens
Size
80 x 80 x 25mm
Driver
350 to 700mA max (L05020 - 1-5 LED)
Colour
Aluminium
(Anodized)
L05300S1
Dimmable
Yes, select L05021 driver
Black
L05300S1-B
Dimensions
Ø 43 x 14mm
White (RAL 9016)
L05300S1-W
Beam angle
35°
Rotation angle
45°
Temperature
70°C max
IP rating
IP20
Forward voltage
3.3 V
Classification
IC-F
Colour Temp K
Trim Finish Colour
L05400
WW = 2900K
NW = 4000K
CW = 5700K
= Natural Silver
W = White
B = Black
specifications
Product Code
Product Code
LED Power
Many more plates available - refer to website
Size
Ø 80 x 25mm
Cutout
Ø 55mm
Colour
Aluminium
(Anodized)
L05300R1.80
Black
L05300R1.80-B
White (RAL 9016)
L05300R1.80-W
Many more plates available - refer to website
dimensions
dimensions
Rectangular Plate - two spots, 142 x 80mm - L05300RT2
Oval Plate - two spots - L05300OV2
(plate only)
(plate only)
dimensions
how to specify eg: L05400WW-W
Product
specifications
LUZERN SPOTS & PLATES
LUZERN LED Module - L05400
The LUMOLUCE Luzern series is a modular system which
consists of standardized metal mounting plates on page 21,
which can be combined with the Luzern LED module(s).
specifications
specifications
Product Code
Product Code
Size
142 x 80 x 25mm
Size
142 x 80mm
Cutout
117 x 55mm
Cutout
117 x 55mm
Colour
Aluminium
(Anodized)
L05300RT2
Colour
Aluminium
(Anodized)
L05300OV2
White (RAL 9016)
L05300RT2-W
Black
L05300OV2-B
White (RAL 9016)
L05300OV2-W
*Black plate available on request
Many more plates available - refer to website
LUZERN PIR Motion Sensor Module - L05405
Many more plates available - refer to website
dimensions
dimensions
specifications
Spot module only. Refer to page 21 for mounting plate options.
Combine with min 2x LED modules.
how to specify eg: L05405-W
Type
Motion detector - 700mA
Size
Ø 43 x 35 mm
Driver
L05020 - 2-5 LED connected
Material
Aluminium
Mounting
Recessed in Luzern plate
Ambient temp (ta)
- 20 to + 50°C
Timer min-max
8 sec, - 30 mins
Rectangular Plate - three spots, 204 x 80mm - L05300RT3
Round Plate - three spots, Ø120mm - L05300R3.120
Lux min-max
50 - 1000 lux
Standard angle
110°C
(plate only)
(plate only) specifications
Optimum mounting height
2.4 - 2.6 metres
Detection area
Ø7m
dimensions
specifications
Product Code
Product Code
Size
204 x 80 x 25mm
Cutout
180 x 55mm
Colour
Aluminium
(Anodized)
L05300RT3
*White or Black plate available on request
Size
Ø 120 x 25mm
Cutout
Ø 110mm
Colour
Aluminium
(Anodized)
L05300R3.120
White (RAL 9016)
L05300R3.120-W
Black plate available on request
20
Product
Trim Finish Colour
L05405
= Natural Silver
W = White
B = Black
dimensions
dimensions
21
LUXOR LED Spot - L05420
specifications
specifications
LUGO LO5310
LUPO LO5340
The ultimate hallway and stairway light. This product can be
used in conjunction with the PIR module to switch them on.
The Lupo is different from the Lugo because it has frosted
glass in front of the light source. Light output is therefore
more diffused than the Lugo.
Colour Temp K
L05310
LO5340
WW = 2900K
NW = 4000K
CW = 5700K
Wall Light
Dimmable
L05021 mains driver
(1-5 LED) 700mA required
Non-dimming driver
L05020 mains driver
(1-5 LED) 700mA required
Size
90mm x 90mm x 40mm
Material
Anodised Aluminium
Cutout
80mm x 80mm
Current
700mA
Expected lifetime
50,000hrs
LED Power/Forward Voltage
2.3W/± 3.3W
Luminaire output
62-86 Lumens
Classification
IC-F
light levels
The Luxi LED spot is made of
anodized aluminium and has
a 10 cm decorative metal wire
sleeve attached. The Luxi is
available in 3 different light
colours and is ideal to build
in all types of cabinets.
Luxi LED spot lights feature
the Lumoluce ‘Click and go’
connector system, and has
a rotation angle of 45°.
light levels
5700K
35°
789 lux
920 lux
1m
35°
657 lux
789 lux
920 lux
1m
Ø0.63m
164 lux
197 lux
230 lux
2m
Ø1.26m
73 lux
88 lux
102 lux
3m
Ø1.89m
2.3W
Luminaire output
150-210 Lumens
Driver
350 to 700 mA max (L05020 - 1-5 LED)
Dimmable
Yes, with a LO5021 driver
Cutout dimensions
Ø 43 x 25mm
Rotation angle
35°
Temperature
50°C max
IP rating
IP20
Mounting
Recessed
Forward voltage
3.3 V
Classification
IC-F
dimensions
Product
Colour Temp K
Trim Finish Colour
L05420
WW = 2900K
NW = 4000K
CW = 5700K
= Natural Silver
W = White
B = Black
LUGANO 2.3W LED Spot - L05410
specifications
specifications
LED power
2.3W
Type
Surface Mount Spot Light
Luminaire output
110-150 Lumens
Dimmable
Yes with L05021 (1-5LED) 700mA
Driver
350 to 700 mA max (L05020 - 1-5 LED)
Non-dimming driver
L05020 (1-5LED) 700mA
Dimmable
Yes, with L05021 driver
Size
35mm x 49mm x 38mm
Cutout dimensions
Ø 40 x 14mm
Material
Anodised Aluminium
Beam angle
90°
Current
350 to 700mA max
Temperature
50°C max
Expected lifetime
50,000hrs
IP rating
IP20
LED Power/Forward Voltage
2.3W/± 3.3W
Mounting
Recessed or Surface (with a spacer)
Luminaire output
150-210 Lumens
Forward voltage
3.3 V
Classification
IC-F
Classification
IC-F
With optional spacer
The Lugano LED spot has a wide 90° beam angle making it ideal
to illuminate surfaces from close range. It is often used under
cabinets and in kitchen hoods. It replaces a standard 50mm
halogen spot, and is equivalant to 20W G4 halogen. Recessed
or surface mount option.
light levels
dimensions
Ø0.43m
24
4
197 lux
230 lux
2m
Ø0.85m
73 lux
88 lux
102 lux
3m
Ø1.82m
35
164 lux
Trim Finish Colour
L05430
WW = 2900K
NW = 4000K
CW = 5700K
= Natural Silver
W = White
B = Black
2
Colour Temp K
29
how to specify eg: L05430WW
Product
dimensions
90°
32
657 lux
4000K
5700K
LED power
how to specify eg: L05420WW-W
LUXI Surface Mount Spot - L05430
2900K
4000K
2900K
dimensions
how to specify eg: L05310WW
Product
Type
Strong by its simplicity,
that’s what the Luxor
LED spot is all about.
This elegant spot is a true
allrounder that will lift
the atmosphere of any
interior. Its available in 5
different LED light colours
and is made of anodized
aluminium.
WALL & CABINET LIGHTS
LUGO / LUPO Recessed Wall Light - L05310 / L05340
292 lux
420 lux 504 lux
73 lux
105 lux 126 lux
0.5m
1m
Ø1.05m
Ø2.10m
how to specify eg: L05410WW
Product
Colour Temp K
L05410
WW = 2900K
NW = 4000K
CW = 5700K
Trim Finish Colour
= Natural Silver
4
36
16
22
3
23
Type
Constant current
Type
Constant current
Max power output
12W
Max power output
12W
Dimmable
No
Dimmable
Yes - trailing edge dimmer
Size
99 x 39 x 23 mm
Size
99 x 39 x 23 mm
Power factor
0.9
Power factor
0.9
Input voltage
110-240VAC 50/60Hz
Input voltage
230-240VAC 50/60Hz
Current output
Output 1: 350mA (1-9 LED)
Output 2: 700mA (1-5 LED)
Current output
Output 1: 350mA
Output 2: 700mA
Voltage output
3 - 32VDC
Voltage output
3 - 32VDC
Ambient temperatures
(ta)
-20 to +50°C
Ambient temperatures
(ta)
-20 to +45°C
Max temp (tc)
85°C
Max temp (tc)
85°C
L05016i - 20W dimmable 2 channel 250-1000mA adj current
L05011i - 20W dimmable adjustable current and voltage
CL350D-240-C - 17W 350mA DALI Dimming Mains Driver
CL500D-240-C - 24W 500mA DALI Dimming Mains Driver
MINI 350mA IP65 - Driver
CL350D-240-C
CL500D-240-C
Type
Constant Current
Constant
current
Constant
current
Max power output
4W
Dimmable
No
Max power output
17W
24W
Size
38 x 27 x 21mm
Dimmable
Dali dimming off, 10%-100%
Dali dimming off, 10%-100%
Power factor
0.4
Size
180 x 32 x 32
mm
180 x 32 x 32
mm
Input voltage
100-240VAC 50/60Hz
Current output
350mA
Power factor
0.96
0.96
Voltage output
3-12VDC
Input voltage
220-240VAC
50Hz
220-240VAC
50Hz
Ambient temperatures
(ta)
-20 to +50°C
Current output
350mA
500mA
Max temp (tc)
80°C
Type
Voltage output
15V - 48V
15V - 48V
Ambient
temperatures (ta)
-25 to +50°C
-25 to +50°C
Max temp (tc)
80°C
80°C
Q4-12V-20W - 20W 12VDC Power Supply
Q2-12V-36W - 36W 12VDC Power Supply
Type
Constant current
Type
Constant current
Type
Constant voltage
Type
Constant voltage
Max power output
20W
Max power output
20W
Max power output
20W
Max power output
36W
Dimmable
1-10V potentiometer 100k log
b/pulse switch
Dimmable
1-10V potentiometer 100k log
b/pulse switch
Dimmable
No
Dimmable
No
Size
113 x 44 x 28 mm
Size
169 x 55 x 30.5 mm
Size
110 x 52 x 23.5 mm
Size
110 x 52 x 23.5 mm
Power factor
0.8
Power factor
0.95
Power factor
0.9
Power factor
0.9
Input voltage
220-240VAC 50Hz
Input voltage
220-240VAC 50Hz
Input voltage
110-240VAC 50/60Hz
Input voltage
110-240VAC 50/60Hz
Current output
O0-1.7A
Current output
0-3.0A
Current output
Output 1: 350mA
Output 2: 700mA
Current output
Output 1: 350mA
Output 2: 700mA
Output 3: 1050mA
Voltage output
12VDC
Voltage output
12VDC
Ambient temperatures
(ta)
-20 to +50°C
Ambient temperatures
(ta)
-20 to +50°C
Max temp (tc)
80°C
Max temp (tc)
75°C
Voltage output
3 - 32VDC
Ambient temperatures
(ta)
-20 to +50°C
Max temp (tc)
85°C
L05049 - 40W dimmable 245-1050mA 60VDC
24
L05021 - 12W 350mA or 700mA dimmable constant current
mains driver
Constant current
output voltage
3 -32Vdc at 350/700mA
3-20VDC at 1050mA
Constant voltage
power output
230VAC: 10V/10W, 12V/12W,
24V/20W
Ambient temperatures
(ta)
-20 to +50°C
Max temp (tc)
85°C
CL700S-240-C - 33W 700mA constant current mains driver
MINI LDD350LW - 12-36VDC input constant current Driver
DRIVERS
TITAN & BLAZE
L05020 - 12W 350mA or 700mA constant current mains driver
MINI LDB300LW - 12-36VDC input constant current Driver
Type
Constant current
Type
Constant current
Type
Constant current
Type
Constant current
Max power output
40W
Max power output
33W
Max power output
8W
Max power output
12W
Dimmable
1-10V (range 15-100%) / potometer
(100k log b)
Dimmable
No
Dimmable
Yes via PWM
Dimmable
Yes via PWM
Size
180 x 32 x 32 mm
Size
22 x 10 x 9 mm
Size
32 x 20 x 12 mm
Size
157 x 42 x 32 mm
Power factor
0.98
Power factor
n/a
Power factor
n/a
Power factor
0.98
Input voltage
198-265VAC 50Hz
Input voltage
9 -36VDC
Input voltage
9 -36VDC
Input voltage
110-240VAC 50/60Hz
350/700mA
Current output
300mA
245mA to 1050mA
350mA
(700mA option)
Current output
Current output
Current output
(switchable)
Voltage output
2 - 40VDC
Voltage output
22-60VDC
Voltage output
9V - 48V
Voltage output
2 - 32VDC
-40 to +70°C
Ambient temperatures
(ta)
-20 to +50°C
Ambient temperatures
(ta)
-20 to +50°C
Ambient temperatures
(ta)
-40 to +70°C
Ambient temperatures
(ta)
Max temp (tc)
80°C
Max temp (tc)
85°C
25
FAQs
Lux
Lifetime
What is an LED?
How long is 60,000 hours?
Lux measures the number of lumens per square metre
arriving at the surface. There are general recommended
levels for different circumstances.
The lifetime in hours of the LED before it reaches 70%
of its original brightness.
LED – Light Emitting Diode – is a solid-state semiconductor
device that converts electrical energy directly into light. There
are no moving parts, no gas and no filaments to heat up.
A LED semiconductor comprises two regions: one is a positively
charged region (P region), and the other is a negatively-charged
region (N region). When a current is passed between these two
regions it causes the electrons to move to the opposite region.
It is this movement that creates and releases energy. This
energy is called a photon and is visible to the human eye, thus
we have a Light Emitting Diode.
Based on how long a fixture is illuminated per day, here’s what
60,000 works out to:
Hours of Operation:
24 hours per day -> 6.8 years
18 hours per day -> 9.1 years
12 hours per day -> 13.7 years
8 hours per day -> 20.5 years
5 hours per day -> 32.8 years
150-200 lux for general household activity,
eg. Vacuuming or washing.
300-500 lux for focused activity,
eg. Reading, studying or preparing food.
Colour temperature
The warmth of colour of the light, measured on the Kelvin
scale(K). Eg. 2700K is a warm cosy light where 4000K is a
cooler blueish white light.
750 lux or more for more concentrated activity
eg. Fine detail sewing.
Lumen
A Lumen is a measurement of how much light is given
out from any light fitting. The more lumens the brighter
the light.
2700K
3000K
Beam angle
Beam angle is measured in degrees and measures spread
of light. A light beam angle is determined when its lux
level drops to half of the intensity of the centre beam.
4000K
Colour rendering
Also known as CRI, is a rating out of 100 of how well the
light source lets your eyes see the vibrancy of colours
compared with natural daylight. The CRI of one light
can only be compared to another light of the same colour
temperature. A good quality LED should be producing
a CRI of at least 80.
Watt
The unit of power the fitting is using.
Efficacy
The amount of lumens being output divided by the
amount of watts used. The higher the efficacy the
more efficient the luminaire.
Dimming
The dimming of LED is controlled by an electronic power
supply (driver). How well the dimming works is a direct
function of the quality of the electronic circuit within the
driver. Switch Lighting products have very good dimming
characteristics.
26
5000K
Warm White - Perfect for creating
a friendly, personal and intimate
atmosphere. Use in homes, libraries and
restaurants. Typical 100W incandescent
lightbulb.
Warm White - Great for a soft, warm
and pleasing light ambiance. Use in
homes, hotel rooms, lobbies, restaurants
and retail stores. Typical 50W halogen
lightbulb.
Natural White - Ideal for a friendly,
inviting and non-threatening feel. Use
in executive offices, public reception
areas and supermarkets.
Cool White - When you want to create
an impression of neatness, efficiency and
cleanliness. Use in offices, art studio’s,
classrooms, showrooms and for mass
merchandising.
Do LEDs run cold?
LEDs are an electronic device and as such they are not 100%
efficient therefore there is wasted energy which is released as
heat. LEDs run much cooler than conventional light sources
(incandescent means light emitted by heat). A Switch Lighting
LED designed to replace a 100W incandescent light bulb will run
at around 70-75°C at its hottest point.
What happens if an LED gets hot?
LEDs have a design temperature called Junction Temperature
(Tj). If this temperature is too hot the LED can change colour
and it will prematurely fail. All Switch Lighting products are
designed to run well below Tj limits.
Should I cover an LED heatsink with insulation?
A traditional LED heatsink should not be covered with insulation.
A heatsink requires free air around it to perform. If the heatsink
function is compromised the Tj will also be compromised. Switch
Lighting products use clever heatsinking of the front face (surface
that is in the living space) to allow the rear of the product to be
covered with insulation, thus there is zero compromise to the LED
product’s performance and longevity.
Can I cover Switch LEDs with insulation?
Yes – Switch LED luminaires have been engineered from the
ground up to be completely packed with insulation. We have
developed unique heat dissipation techniques to allow this without
compromising the performance or longevity of our products.
What is a driver?
In regards to LED, a driver is the power supply module that
controls the current and voltage supplied to the LED or LEDs in
circuit. All LED must have their voltage and current controlled.
A typical driver is known as a switch mode power supply.
Switch Lighting design our own range of drivers, from tiny little
units that are embedded inside products to larger standalone
products that run our bigger downlights.
GLOSSARY & FAQs
GLOSSARY
Do I have to replace LED diodes?
An LED does not burn out like a standard lamp, so individual
diodes do not need to be replaced. Instead, the diodes gradually
produce lower output levels over a very long period of time. If
one LED fails, it does not produce a complete fixture outage.
What are the environmental benefits?
LED fixtures also have an environmental advantage in that they
contain no mercury, last longer and produce less waste, and
they are made from fully recyclable materials. Furthermore,
the extruded aluminium heat sink is manufactured using 77%
post-industrial recycled material. A single kilowatt-hour of
electricity will generate 610grams of CO2 emissions. Assuming
the average light bulb is on for 10 hours a day, a single 100-watt
incandescent bulb will generate 222kg of CO2 every year. The
12-watt Switch Lighting LED equivalent will be responsible
for only 26kg of CO2 over the same time span. A building’s
carbon footprint from lighting can be reduced by nearly 90%
by exchanging all incandescent bulbs for new LEDs.
What are the advantages of using LED lights?
LEDs bring several advantages to the lighting industry,
including high efficiency and durability and, with superior life
over other lamp sources, their required maintenance is greatly
reduced. This translates into energy savings, maintenance
savings and an overall reduction in cost of ownership over
the product’s lifetime.
Where have LEDs been used in the lighting
industry?
LEDs are commonly used in aesthetic, effect, or specialty
lighting applications, including architectural highlighting. Over
the last three years LEDs have been used in many residential
and commercial new builds. The year 2015 sees the majority
of new construction fitted out with LED products.
Can I put 12V onto LEDs?
As a rule of thumb you should never put 12V directly onto an
LED. An LED is a constant current device and a single diode
requires only around 3V to operate. All LEDs require some form
of voltage and current regulation. This is either an internal or an
external driver. Always consult the manufacturers instructions
before connecting any power.
27
The LED Lighting Experts
Nov 2015 - V6.2
Manufacturers of NZ’s No.1 LED lighting solutions.
SWI0010