ROADSHOW SPECIALS
Show Runs August 1 - August 31, 2015
QUALIT Y AND INNOVATION SINCE 1908
5% OFF THE ENTIRE LINCOLN/MITYVAC LINE
ADDITIONALFEATURING!
DISCOUNT ON THESE ITEMS!
1884
20V PowerLuber® Grease Gun Kit
•Delivers 10,000 max. PSI.
•Up to 14 grease cartridges per charge.
•2-speed motor; low and high speeds.
•LCD screen indicates grease output,
battery charge level and motor speed.
•Built in LED light to illuminate work area.
•Includes 2 rechargeable Li-Ion batteries,
charger and case.
N EW
M O D ER N
DESIGN
3508
8 Gallon Low
Capacity Drain
•Adjustable from 36 in. to 65 in.
•Reservoir’s flat-top design holds drain filters, tools, nuts, bolts, etc.
•Splash guard for over spray protection.
•Durable, high-density polyethylene
reservoir utilizes space efficiently and prevents damage to vehicle.
•Casters enable easy movement and
have over-molded steel inserts for
long service life.
3518
18 Gallon Low Capacity Drain
•Adjustable from 40 in. to 77 in.
•Standard bung port for compatibility
with Lincoln rotary and diaphragm
pumps (on model 3518 only.)
1244
12V PowerLuber® Grease Gun Kit
•Delivers 6,000 max. PSI.
•Up to 5 grease cartridges per charge.
•Accessible check and bleeder valve.
•Single speed planetary gear drive.
•Includes 2 NiCad batteries, charger and case.
CALL FOR
SPECIAL
PRICING!
1844
18V PowerLuber® Grease Gun Kit
•Delivers 7,500 max. PSI.
•Up to 10 grease cartridges per charge.
•2-speed transmission provides high
volume or high prssure output.
•Includes 2 NiCad batteries, charger and case.
1550
12V DC Heavy
Duty Fuel
Transfer Pump
•Quickly delivers diesel, kerosene or mineral spirits from both mobile and stationary tanks.
•15 gal./min. flow rate.
•1 in. pump inlet and outlet NPT.
•360° locking bung.
•Heavy gauge, 18 ft. cable.
3669
Low Profile Truck Oil Drain
•Features a 17 gallon capacity reservoir.
• Durable 120 Volt electric pump installed
below the front of the reservoir.
• J-hook style discharge spout with drip plug.
•Overall height is only 7-3/4 in.
MV7201
Fluid Evacuator Plus
MV6830
Break Bleeder / Evacuator
•Automatic shutoff valve to prevent overfilling.
•Bleeds at up to 2 quarts per minute.
•Compressed air operation integrated.
•1.9 quart capacity fluid collection reservoir.
•Reservoir and lid feature large, coarse
threads to reduce cross threading.
•2.3 gallon capacity reservoir.
•Evacuates or dispenses
at the push of a button.
•Convenient manual
pump operation.
•Reservoir will not rust or corrode.
•Automatic shutoff
for overflow prevention.
•Includes 5 ft. flexible hose and (2) rigid
dipstick tubes for engine oil removal.
2NATS SHOW SPECIALS
5% OFF THE ENTIRE GEARWRENCH LINE
FEATURING!
9416
16 Pc. Metric Combination
Ratcheting Wrench Set
•Bright, full polish chrome finish.
•Sizes: 8 to 22 and 24 mm.
80300
51 Pc. 1/4 in. Drive Socket Set
•SAE sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, and
9/16 in.
•Metric sockets: 4, 5, 5.5, 6 to 15 mm.
•SAE Deep sockets: 3/16, 7/32, 1/4,
9/32, 5/16, 11/32, 3/8, 7/16, 1/2
and 9/16 in.
•Metric Deep sockets: 4, 5, 5.5, 6 to 15 mm.
•Full polish teardrop 84 tooth ratchet,
1/4 in. thumbwheel ratchet, universal
joint, and 2 and 6 in. extensions.
81027
1/4 in. Drive Gimbal Ratchet
•Gimbal design allows ratchet to pivot
in two directions for easier access.
•72-Tooth ratcheting mechanism for 5
degree swing arc.
•Anodized aluminum finish.
•Easy to use forward/reverse lever.
9312
13 Pc. SAE Combination Wrench Set
9412
12 Pc. Combination Ratcheting
Wrench Metric Set
•Bright, full polish chrome finish.
•Surface Drive® on box end provides
•Bright, full polish chrome finish.
off-corner loading for better grip and
•Sizes: 1/4, 5/16, 3/8, 5/8, 7/16, 1/2, 3/4, reduced fastener rounding.
9/16, 11/16, 13/16, 1, 7/8 and 15/16 in.
•Includes sizes: 8 mm and 11 to 19 mm.
80550
57 Pc. 3/8 in. Drive Socket Set
•SAE sockets: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1 in.
•Metric sockets: 6 to 19 mm.
•SAE Deep sockets: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 and 7/8 in.
•Metric Deep sockets: 6 to 9 mm.
•Full polish teardrop 84 tooth ratchet, stubby ratchet, 3/8 in. universal joint and 3 and 6 in. extensions.
81270
3/8 in. Drive Gimbal Ratchet
•Gimbal design allows ratchet to pivot in
two directions for easier access.
•72-Tooth ratcheting mechanism for 5
degree swing arc.
•Anodized aluminum finish.
•Easy to use forward/reverse lever.
81900
24 Pc. Long Pattern Combination NonRatcheting SAE/Metric Wrench Set
•25% More Torque!
•Offset box end for increased access.
•Includes Metric sizes: 8 to 22 mm and
SAE sizes: 1/2, 9/16, 5/8, 11/16,
15/16, 3/4, 1, 13/16 and 7/8 in.
80051
12 Pc. Combination Dual
Material Screwdriver Set
•“Speed Zone” for turning in lower torque
applications.
•Innovative dual material handle for
comfort and performance.
•Contains 6 slotted and 6 Phillips
screwdrivers.
•Oil and solvent resistant.
NATS SHOW SPECIALS
3
SPECIALS ON THESE SELECT ITEMS
0384-2571
OxyFuel 250 Medium Duty
Outfit (Boxed)
•High performance 250 Series color
coded regulators.
•Complete handle cutting attachment
optimized for multiple gasses.
•Suitable for light to medium duty fusion
welding, braze welding, brazing, heating
and hand cutting.
• Up to 5 in. cutting cap. and 1/2 in. welding.
•Includes: Oxygen/Acetylene 250
Series regulators, 250 Series cutting
attachment and handle, dual R-Grade
hose 12.5 ft., No. 0 welding nozzle, No.
0 cutting tip, striker, protective eye wear
and manual.
0384-2682
OxyFuel 350 Heavy Duty
Outfit (Boxed)
•Same performance specs as 03842571, but suitable for medium to heavy
duty fusion welding, braze welding,
brazing, heating and hand cutting.
• Up to 6 in. cutting cap. and 1/2 in. welding.
•Includes: Oxygen/Acetylene 350
Series regulators, 350 Series cutting
attachment and handle, flashback
arrestors, dual R-Grade hose 12.5 ft.,
No. 2 welding nozzle, No. 1 cutting tip,
striker, protective eye wear and manual.
1444-0346
FP135 MIG/ Flux
Cored Weld Pack
•Duty cycle at 104°F and 20-135 AMP cutting range.
•.023 - .035 in. (0.6 - 0.9mm) wire dia.
•Designed to operate from a standard
household outlet.
•High max. output of 135 AMP.
•Includes: MIG welder, Tweco®
WeldSkill® gun, return cable and
clamp, input power cord and plug,
spool of flux cored wire, regulator, an
operating manual, auto-darkening
helmet, MIG welder cart, chipping
hammer, wire brush and regulator.
CALL FOR
SPECIAL
PRICING!
0384-0995
OxyFuel 250 Series Outfit with Carry Tote
•Complete portable system.
•Cutting torch and handle are ready for multiple gas options; Oxy-Acetylene, Propane, Butane, Natural & LP Gases, and Propylene.
•Cut 1/8 in. (3.2 mm) to 3 in. (76.2 mm) steel.
•Weld up to 1/4 in. (6.4 mm) steel.
•Includes: 250 Series cutting attachment and handle, cylinder wrench with chain, dual R-Grade hose 12.5 ft., No. 0 welding nozzle, No. 0 - 3 cutting tips,
striker, protective eyewear, tote carry Pak and manual.
•*Included tanks are empty and for exchange only.
0384-2573
OxyFuel 250 Torch Replacement Kit
•Multiple heat nozzles and welds up to 1/2 in. (12.7 mm) of steel.
•Includes 250 Series cutting attachment and handle No. 0
welding nozzle, No. 0 - 3 cutting tips, and manual.
1444-0872
3-in-One MST 220i MIG
Stick and TIg Welder
•Offers 115 and 208/230V, and provides MIG, Stick and TIG welding outputs.
•210 AMP maximum output.
•Portable enough to take to the job site.
•Includes: Firepower MST 200i power supply, Firepower 220 AMP MIG gun, Firepower Argon/
CO2 pressure regulator / gauge and hose, electrode holder and ground clamp, 230V - 115V adapter plug
and cable, drive roll and contact tips, and CD with multi-language operating instructions.
1444-0900
MST 220i Power Cart
•Sturdy handle makes
transporting welders or
cutters easy.
•Designed for most portable welding /
cutting systems.
•Easy-rolling 8 in. diameter wheels.
FREE!
with Purchase
of 1444-0872
4NATS SHOW SPECIALS
10% OFF THE ENTIRE S&G TOOL AID LINE
FEATURING!
99000
In-Line Water
Separator and
Air Filter
•Removes water and foreign particles from compressed air stream.
•Attaches directly to spray gun or air tool.
•Clear reservoir shows accumulated water taken out of air line.
•1/4 in. NPT M inlet x 1/4 in. NPT F outlet.
19200
Heavy Duty Hand Riveter Kit
with 40 Rivets
•Sets 3/32, 1/8, 5/32 and 3/16 in. rivets
quickly and easily.
• Set includes 10 rivets of each of these sizes.
•Sets up to 3/16” steel or aluminum rivets.
•Comes with 4 nosepieces.
•Nosepieces are easily interchangeable.
•Cushion molded handle grip.
81000
The Slugger Heavy
Duty Slide Hammer
•10 lb. slide weight designed for in-line impact and balanced for ease of use.
•Dual hammer action.
•Quick assembly for applied hook-ups on fender edges, bumper
ends, rocker panels, aligning doors and door edges, and many more applications.
•Rubberized hand hold for good grip.
•Supplied with lock nut to keep
attachments from rotating.
62900
MacPherson Strut Coil Spring Tool
•For the MacPherson Struts found on most domestic and imported vehicles.
•Works quickly and easily.
•Consists of two cold headed bolts made
of chromium molybdenum alloy steel.
•Use with impact wrench or hand tool ON or OFF the car.
•Contains complete instructions and safety kit.
94860
Cut-Off Wheels 5 Pk. Display Card
•Cut-Off wheels are 3 in. diam. x 1/16 in.
thickness x 3/8 in. center hole diam.
•Abrasive reinforced wheels are ideal for
automotive and autobody repair.
•Cut all ferrous materials with ease.
•Easier and safer to control than a torch,
faster and less effort than a hacksaw.
•Rated 25,000 RPM maximum speed.
81100
The Slugger in a Tool Box
87360
Lever Activated Single Suction Cup
•For windshield removal and replacement,
to pull out sheet metal panel dents on
doors, fenders and hoods.
•Suction Cup measure 4-5/8 in. diameter.
•Safety orange for high visibility.
•Capacity 80 lbs.
23920
In-Line Ignition Spark Checker
•Features a 90° boot and longer wire for
easy installation and removal.
•Use to quickly troubleshoot ignition
systems with “hands free” operation.
• Shows a duplicate view of the ignition spark.
• Frequency and intensity of flash indicates
whether there is an ignition system problem
or a fault in the fuel delivery system.
•Includes the most popular components
of the 81000.
•Packaged in a handy metal tool box
that can be locked for security.
81200
Midi-Weight 5 lb. Slide Hammer
and Dent Puller
•Excellent balance with 5 lb. slide weight on plated, solid, 5/8 in. shaft.
•Soft cushion grip absorbs shock.
•Broached nose cone locks puller screw
firmly in place.
•Supplied with body hook for pulling out
curled and creased edges and panels.
•Helps in aligning hood and trunk hinges.
• Nose cone and shaft threads are 5/8 in.-18.
NATS SHOW SPECIALS
5
5% OFF THE ENTIRE AFF LINE
3180
4,400 Lb. Capacity HeavyDuty Transmission Jack
SPECIAL DISCOUNT ON THESE ITEMS!
CALL FOR
SPECIAL
PRICING!
834
35 Ton Capacity Floor Press
•4,400 lb. capacity.
•Fully adjustable saddle with max. tilt for easier alignment.
•Adjustable corner brackets.
•32 in. handle pivots 360° around pump.
•Convenient side trays for small parts and accessories.
•Seven bed adjustments provide added versatility.
•Two-speed hand pump for speed and ease.
•Frame mounted hydraulic pressure gauge.
•Includes two arbor plates.
854SD
50 Ton Super Duty Shop Press
3140
20 Ton Hydraulic Service Jack
•Height Range: 7-3/4 in. to 23-3/4 in.
•For heavy-duty lifting.
•Long 67 in. body for easy lifting of
vehicles with long overhangs.
•Dual steel front wheels for added security and durability.
•Welded frame and heavy gauge steel for unsurpassed strength.
•Movable press head for flexibility.
•Protective guard, press adapter set, multiple use pins, and “V”
blocks included.
•Convenient liquid filled gauge
shows press force being applied.
•Air pressure: 110 - 120 PSI.
10% OFF THE ENTIRE ULLMAN LINE
HT5-30PK
Pocket
Telescopic
Magnetic
Pick-Up Tool
30 Pc. Display
•With POWERCAP® lifts 2-1/2 lbs.
•Telescopes from 5-1/2 in. to 25-1/2 in.
•Contains: (10) Neon Blue, (10) Neon
Green, (10) Neon Orange.
•Extra high flux magnet for max. strength.
•Comfortable textured cushion grips.
16MLT
LED Lighted Flexible Magnetic
Spring Claw
•Powerful magnet lifts up to 5 lbs.
•Overall length 25-3/8 in.
•Press plunger and jaws open / release.
•Two CR2032 lithium batteries included.
FEATURING!
15XDISP
Pocket Telescopic
Magnetic Pick-Up
Tool 30 Pc. Display
•Lifts 2 lbs.
•Telescopes from 5-7/8 in. to 25-9/16 in.
•Contains:(10) Bright Orange, (10) Bright Green and (10) Silver pick up tools.
•Extra high flux magnet for max. strength.
•Pocket clip keeps it handy and secure.
GM-2
MegaMag Magnetic Pick-Up Tool
•Lifts 16 lbs.
•Telescopes from 8-1/4 in. to 30-1/4 in.
•Extra high flux magnet for max. strength.
•Stainless steel telescoping handle.
•Comfortable textured cushion pistol grip.
FL-3SMD
Flexible Magnetic
SMD Work Light
•Sturdy aluminum housing.
•110 Lumen lights.
•Heavy duty spring adjusts light beam to needed angle.
•Strong magnetic base.
•Comes with 3 AAA batteries.
HTK-2LT
LED Lighted Rectangular
Telescoping Inspection Mirror
•2-1/4 in. x 3-1/2 in. mirror.
•Telescopes from 6-3/4 in. to 30-1/4 in.
•Lighted head with three LED Lights.
•Ball joint holds mirror head at any angle.
•Comes with two CR2032 batteries.
6NATS SHOW SPECIALS
5% OFF THE ENTIRE LANG LINE
SPECIAL DISCOUNT ON THESE ITEMS!
TU-443
Deluxe Fuel
Injection Pressure Test Set
•3-1/2 in. gauge has a dual scale dial with
ranges from 0 - 100 PSI and 0 - 7 bar.
•Relief valve and 6 ft. of tubing.
•4 ft. gauge-hose and gauge with a hook.
•Adapters, hoses, and fittings cover most
fuel injection systems worldwide.
•Time-saving quick coupler connection at the end of the gauge hose.
3495
12 Pc. Combination Internal/
External Retaining Ring Pliers
•Pliers have a knurled center screw with
spring for easy changing and a secure hold.
•Features 0.038, 0.047, 0.070, 0.090 in. tip
diameters in straight, 45° and 90° angles.
•Comfort grip made of low-temp, highimpact material providing extra durability.
•Packaged in a plastic blow molded case for
protection and easy use.
CALL FOR
SPECIAL
PRICING!
13804
Automotive Cat IV Digital Multimeter
•CAT IV 600/CAT III 1000V approved for hybrid testing.
•3-5/6 digit 6000 count display.
•Display also features a bar graph.
•4 step adjustable triggers on 1 to 8 cylinders, either 4 or 2 stroke for outboards,
motorcycles, and conventional engines.
•Measures temperature up to 1,832°F.
5% OFF ENTIRE MOTOR GUARD LINE
Excludes JO-Studwelders
FREE
MS-1 Magna Stitcher
with Purchase
of Eligible
Studwelders!
MS-1
Magna Stitcher Kit
•Converts studwelder into a plastic repair tool.
•Fits all popular models.
Eligible Studwelder Sets:
JO1000
JO1500
JO1550
JO1050
AP-3
Sanding Block Assortment
• Fit for a variety of sanding.
applications from fast cutting to
color sanding.
•Features: Big-Block®, Rocker
Block®, Soft Block® and
Memory Block®.
JO1525
JO2000
JO2250
JO1000
Magna-Spot Entry Studwelder Kit
•Kit contains entry slide hammer,
electrode for pins and 100 - 2 mm pins in a handy storage carton.
•120 VAC 1 PH 50/60 Hz 15 AMP.
JO1500
Magna-Spot
Professional Studwelder Kit
•Contains a slide hammer, electrodes for
pins, rivets and shrinking, 500 - 2 mm pins, and 150 - trim rivets.
MS-2500
Magna-Stitcher Plastic
Repair System
•Complete unit with all the power and
accessories needed for structural repair of plastic parts.
•Features a powerful work light in the gun.
NATS SHOW SPECIALS
7
5% OFF THE ENTIRE CTA LINE
FEATURING!
2380
Spark Plug Socket - 5/8 in. x 6 Pt.
5160
Extra-Long Trim Tool and Pry Bar
•Service Honda and Toyota hemi-style
plugs, plus marine, small engine, and
speciality motors.
•Extra long socket with a thin wall that
combines for great accessibility.
•10 in. long with 3/8 in. square drive.
• Use on instrument panels, door thresholds, interior trim, trunk panels, etc.
•Nylon plastic body will not mar or scratch surfaces.
•400 mm / 15-3/4 in. long for extra reach.
2777
VW / Audi Timing Tool Kit
2390
Spark Plug Socket - 9/16 in. x 6 Pt.
•Service Ford Triton V8 and V10 engines.
•10 in. long with 3/8 in. square drive.
•Heavy-Duty construction for durability.
7077
Extraction & Filling Pump - 1500cc
•Handle all types of automotive fluid,
including brake fluid.
•Body is calibrated (English & Metric).
•Translucent body for viewing volume and fluid condition.
•Disassembles for easy cleaning.
•Includes hose assembly with shut off valve and aluminum tip with cap.
2475
Toyota / Lexus Heavy
Duty Oil Filter Wrench
•64 mm x 14 ft.
•Heavy-duty cap type oil filter wrench.
• Forged and machined steel for removal of
the most stubborn oil filter housing caps.
•1/2 in. square dr. or 1-1/8 in. hex dr.
•Bright chrome plate finish.
•Includes: one VW / Audi timing tool kit.
•Also includes: 2 crankshaft holders and
complete set of locking pins.
•Specifically crafted for VAG 2.0L TDI PD
DOHC engines found on Audi A4, A6, VW
Golf, Jetta, and Touareg models.
2775
VW Timing Belt Tool Kit
•Services 99 and up engines with ALH code
found on Golf, Jetta and Beetle.
•Includes a timing belt tensioner spanner
wrench, TDI camshaft lock plate, and
injection pump lock pin.
7480
Oil Funnel Kit
•Fast oil filling without spillage or waste.
•Color-coded adapters fit oil filler holes on many European, Asian and US vehicles.
•2 Liter universal funnel fits all adapters.
•Special angled extension with locking
design allows access in hard-to-reach
applications.
•All parts available separately.
8140
5 Pc. Mortorq® Super Socket Set
•Bits have asymmetrical geometry that
provides enhanced installation of
MorTorq® fasteners.
•Applications include transmissions,
gearboxes, instrument panels, and
seat tracks.
•Can also be used for differentials, door
panels, suspension components, and
restraint systems.
•Designed for use on GM, Chrysler,
BMW and Fiat vehicles of the mid2000 model range.
•Includes a chrome plated bit holder
with a 3/8 in. square drive.
4305
Large Hub Puller
•Hub puller improved design features
widened hole footprint to accommodate
larger 5 x 120 mm lug patterns.
•90 mm / 7-1/2 in. long bolt for more
applications when flange pulling and
axle pushing.
•Will service much wider range of
applications, including almost all BMW's.
8NATS SHOW SPECIALS
5% OFF THE ENTIRE SUNEX LINE
$100
MAIL-IN
REBATE!
SPECIAL DISCOUNT ON
THESE ITEMS!
3580
80 Pc.
3/8 in.
Dr. Master
Impact Socket Set
SX2PK
2 Pack Die
Grinder Set
•Includes 1/4 in.
straight and 1/4 in. angled die grinders.
•Must order in quantity of 8. (1 box).
•6 pt. fractional std. and deep: 5/16 in. to 3/4 in. and Metric: 8 mm to 19 mm.
•Fractional univ. 3/8 in. to 3/4 in. and
metric univ. 10 mm to 19 mm.
•External star bit: E5 to E16 and Internal
star bit: T20 to T55.
• 3/8 in. dr. extensions in 3, 5, 10, and 15 in.
•Useful in hard to reach areas.
•Feature a positive locking ball detent.
•Includes 3, 6, and 12 in. locking extensions.
•Forged from high quality CR-MO alloy steel.
•Rear exhaust.
•Light weight at 1.6 lbs.
•Includes 3 in. cutting wheel.
7793B
1/2 Ton Telescopic
Transmission Jack
•Foot activated pump pedal.
•Overload valve.
•Maximum height of 74 in.
•Universal saddle with angle brackets.
•Wide base legs with swivel caster.
•Two caster wheels have locking feature to prevent jack from moving.
6810
1500 Lb. Under
Hoist Support Stand
with Foot Pedal
2501
3 Pc. 1/2 in.
Drive Locking
Impact Extension Set
SX233A
3 in. Utility Cut-Off
Tool with Guard
CALL FOR
SPECIAL
PRICING!
•Designed to support vehicle
components only and ideal for exhaust system installations and shock
absorber replacement.
FREE!
with Purchase
of 7793B
SPECIALS ON THESE SELECT ITEMS
1033000
11 in. Portable Electric Stainless
Steel Air Circulator
•1,200 max. CFM, 1/4 HP.
•3 speed settings: low/medium/high.
•Telescopic handle, integrated wheels.
•Heavy-duty molded fan blade.
•30 ft. cord, convenient cord wrap.
9036200
11 in. Polyester Filter w/Mounting Ring
•Includes 1 filter and (1) 11 in. diameter ring.
•Use with 103300 air circulator.
5872510
5 Gal. Portable Vac
•6.5 Peak HP.
•20 ft. power cord.
•Blower Voltage: -120 Volts.
•7 ft. x 1-1/2 in. Lock-On hose.
•Easy to clean Ultra Web cartridge filter.
•Collector bag that fits inside the tank.
5870800
Bulldog 8 Gal. Vacuum
CALL FOR
SPECIAL
PRICING!
•Cord Length: 6 ft.
•Air Flow: 175 CFM.
•Hose: 1.25 in. x 10 ft.
•Quiet operation.
•Includes extension wands,
combination nozzle, round brush, crevice tool, gulper nozzle, and tool holder.
9621210
12 Gal. Wet/Dry Vacuum
•6.5 HP single stage motor.
•Cord Length: 20 ft.
•Air Flow: 195 CFM. Hose Size: 1.5 in. x 12 ft.
•Includes: extension wands, floor nozzle, squeegee inserts, crevice tool, claw utility nozzle,
and filter.
NATS SHOW SPECIALS
9
5% OFF THE ENTIRE MASTERCOOL LINE
Excludes Recovery Machines
SPECIAL DISCOUNT ON THESE ITEMS!
CALL FOR
SPECIAL
PRICING!
20300
300 CFM
Blower Fan
89661-PRO
R134a Manifold Gauge Set with
Aluminum Standard Couplers
•Gauges can easily be recalibrated.
•Features a set of three SAE approved
nylon barrier hoses, professional
extruded aluminium block, silicone
dampened gauges, professional R13a
manual couplers and includes manual
couplers and 60 in. hoses.
99872-A
R134A Digital Manifold Gauge Set
with 72 in. Hose and Manual Coupler
•Pressure and Vacuum Display: low side – PSI, Bar, MPa, Kg/cm2 and IN-Hg high side – PSI, Bar, MPa, Kg/cm2.
•Temp. display: -40 to 200°F (-4 to 93°C).
•Response time: 250 mSec.
•Connection: 1/2 in. acme or 1/4 in. flare.
•Power: 9V DC battery.
•Battery life: 50 - 60 hr. continuous use.
•Low battery indicator: special ICON on LCD.
55900
IntellaSense II
Refrigerant Leak Detector
•SAE certified J2791 (134A) J2913
(1234yf) leak detector.
•Detects as low as .15 oz. per year.
•Operating temperature: 0 to 140°F
•High, medium and low sensitivity with a
2,000 hour sensor life.
•Peak feature to assist with detection of
multiple leaks.
•1/4 HP, 1,720 RPM and 110V/60Hz.
•Ultimate vacuum 75 Microns.
•Gas ballast and internal check valve.
•Prevents oil blowout.
21200
1200 CFM Blower Fan
•Same specs as the 20300 but moves air up to 1200 CFM.
•2.0 AMP.
20300-HTR
Heater Attachment
for 300 CFM Blower Fan
•Converts blower into a heater.
•Clips Securely onto the front of the blower
and plugs into one of the outlets on the
side of the blower.
52224-A-SP
Infrared Thermometer with Laser
•Ranges -58° to 932°F (-50° - 500°C).
•Laser targeting accuracy of +/-2°C (4°F) or +/- 2% of reading.
•Includes free 52220 1 in. dial thermometer.
91051
Total A/C
Quick Flush Kit
90062-A
3 CFM Single Stage Vacuum Pump
•1.0 AMP.
•120 Volts, 60 Hz.
•Moves air up to: 300 CFM.
•For indoor or outdoor use.
•Variable speed switch controls.
•Motor speed: 950 - 1650 RPM.
•11 AMP built-in grounded receptacles.
•Housing material: impact resistant ABS.
•8.5 ft. cord length, SJTW 14AWG.
•O-Ring safe.
•Specific fluid for the inner flushing
of air conditioning and refrigeration systems.
•Non-flammable and non-corrosive.
•Pressurized container ready to use.
71475-PRC
Universal Hydraulic Flaring Kit
•Fabricates push connect 1/4, 5/16 and
3/8 in.; GM fuel line flare, brake lines
and transmission 5/16 in. and 3/8 in.; flare/double flare 3/16, 1/4, 5/16, 3/8
and 1/2 in.; Metric bubble flare
4.75, 6, 8, and 10 mm.
•Includes Hydra-flare yoke, pump assembly,
45° flaring cone and tube cutter.
10NATS SHOW SPECIALS
5% OFF THE ENTIRE SFA LINE
CALL FOR
SPECIAL
PRICING!
SPECIAL DISCOUNT ON THESE ITEMS!
SOLD IN
Pairs!
97431
Pro Tool Cart
HW93652
3 Ton Service Jack
•Cast iron pump base.
•Sealed hydraulic pump.
•Pressure relief valve prevents overloading.
•In-line pump assembly assures
cast iron lift arm for heavy duty loads.
•Wider for more stability under a load.
•Height: min. 5 in., max. 23-1/2 in.
HW93652
3 Ton Service Jack
HW93512
10 Ton Pin Style Jack Stands
•Sold in pairs.
• Pin heavy duty square tubing. style column
adjust in 2 in. height intervals.
•Large saddle securely supports load.
•Attached wheels for easy movement.
•Height: min. 19-1/2 in., max. 31-1/2 in.
HW93718
1 Ton Floor Style
Transmission Jack
•Longer chassis ideal for truck and SUV.
•Wider for more stability under a load.
•For heavy duty •Huge 6-3/4 in. saddle to safely and transmissions.
securely lift the load.
•Four 360° full •Pressure relief valve prevents overloading.
swivel casters.
•Cast iron lift arm for heavy duty loads.
•Wishbone design •In-line pump assembly assures long life.
for max. mobility.
•Height min. 5 in., max. 23-1/2 in.
•Adjustable saddle.
•1/2 in. ratchet.
•Includes load restraint chain.
HW93720
1/2 Ton Air /
Hydraulic Telescopic
Transmission Jack
•Combines air (first stage only) and hydraulic power for maximum speed and accuracy.
•Wide spread casters.
•4 ratcheting brackets fit transmission pan flanges.
•Head adjustments made easy with big easy-to-grip crank handles.
•Hefty nylon safety strap helps anchor transmission.
•Two drawer locking tool cart with large top storage bin and sliding top opening.
•Sliding top to remove tools from top of
cart when accessing tools inside.
•Locking casters.
91305
2-in-1
Mechanics
Step Stool /
Creeper
•Heavily upholstered seat for comfort.
•Five 3 in. oil resistant full bearing
casters.
•Steel tread plate on step.
•Adjustable foot on step stool to
eliminate any unsteadiness.
80600
Jump Starter / Power Bank Black
29037
3.5 ton fast lift service jack
• Patented “Magic Lift” technology for less
handle resistance and fastest to load.
•Padded saddle and u-joint release for
max. control while lowering the load.
•Height: min. 5-1/2 in., max. 22 in.
•350 cca / 700 peak AMP; prevents
back charging, cross charging, thermal
damage, and sparking.
•Patented automatic reset technology.
•Can be used as a power bank for most
cell phones, iPhones, iPads, digital
cameras, tablets, etc.
• Includes 8 guage jumper cables, device
charger, USB 5V/2A cables for iPhones,
iPads and most mobile phones and
zippered storage case.
80600R
Jump Starter/Power Bank Red
NATS SHOW SPECIALS
11
SPECIALS ON THESE SELECT ITEMS
CALL FOR
SPECIAL
PRICING!
SPECIAL DISCOUNT ON THESE ITEMS!
79993
18 in. Swivel Impact 1/2 in.
Dr. Extension
78537
16 Pc. Locking Lug Master Key Set
•The set was designed explicitly for the
purpose of removing locking lug nuts on
aftermarket wheels.
•Fastener types: 5 to 12 point spline, 8 to 10 point star, hex and fluted hex.
•SAE and Metric sizes.
•Blow-molded plastic case.
•SAE 3/8 in. male x 1/2 in. female.
•The pinless joint design prevents the
floppiness that occurs with traditional
universal joint designs while still allowing
a high degree of flexibility for attached
sockets.
•Made of Cro-moly and black oxide finish.
•Lifetime warranty.
79994
24 in. Swivel Impact 1/2 in.
Dr. Extension
•SAE 3/8 in. male x 1/2 in. female.
CHOOSE
FROM 6
COLORS!
79995
36 in. Swivel Impact 1/2 in.
Dr. Extension
78630
3/8 in. Dr. Locking Flex Head
Extra Long Ratchet
•18 in. extra long.
•90-tooth count.
•Reversible.
•Locks in 7 different positions.
•Movable slider to adjust the head
•Comfortable easy grip handle.
•3 modes: breaker, full flex and flex lock.
78631
1/2 in. Dr. Locking Flex-Head
Extra Long Ratchet
•24 in. extra long.
•72-tooth count.
•SAE 3/8 in. male x 1/2 in. female.
78739
12 Pack POP Display LED
Rechargeable Pen Light
•70 Lumens.
•Constructed with a high impact
polycarbonate lens on a durable
anodized aluminum body.
•Conveniently sized piece of equipment
you can carry to make sure you have
light where and when you might need it.
•Run Time: 1 hour and 15 minutes.
•Rechargeable Li-Ion battery.
•Includes: 12 rechargeable light bases
with bright white lens head (2 of each
color), 12 USB charging cords and 12
wall mount power adapters.
78610
Rechargeable Pen Light with
UV Head Combo
•70 Lumens.
•LED and UV LED bulbs.
•Constructed with a high impact
polycarbonate lens on a durable anodized
aluminum body.
•Run time: 1 hour and 15 minutes.
•Rechargeable lithium ion battery.
•Length: 5-3/4 in.
•Includes: Rechargeable light base,
standard bright white lends head, UV lens
head, USB charging cord and wall mount
power adapter.
78740
Rechargeable Bump Light
•Nylon cage and TPR bumpers give this
light impact resistance and durability.
•Fold away hook and magnetic holder.
•Compact anodized aluminum casing for durability and heat dissipation.
•2 modes: High - 500 lm. Low - 250 lm.
•Run Time: High - 2 hr. and Low - 4.5 hr.
•Rechargeable Li-Ion battery.
12NATS SHOW SPECIALS
10% OFF THE ENTIRE LISLE LINE
FEATURING!
•Range: 36-1/2 in. to 74 in.
•Quick release height adjustment.
•Reinforced base will not warp with hot oil.
•Large 15 in. funnel has strainer.
39900
Master Disconnect Set
•Contains 8 popular disconnect tools for
A/C and fuel lines.
•Complete set of disconnect tools stored
in a handy blow-molded case.
11102
8 Gal. Oil Lift Drain
24680
Spill-Free Funnel
•Eliminates trapped air pockets.
•Five adapters fit most domestic and import
cars, light trucks and Ford vehicles.
•45° elbow allows for use on radiator caps
that are placed at an angle.
20130
Magnetic Glove Dispenser
65000
Deep Hole Aluminum Head M14 x
1.25 Spark Plug Hole Repair Kit
• Replaces stripped spark plug threads on
aluminum heads with 14 mm spark plugs.
•Set includes one-piece drill tap, long tap
holder, short tap holder, insert installer,
swedger and handle, three insert sizes:
5/16 in., 7/16 in. and 11/16 in. and
detailed instructions.
•Comes in blow-molded case for storage.
43300
Pneumatic Fan Clutch Wrench Set
•Quickly removes/installs fan clutch when
repairing the water pump or fan clutch.
•Set includes 7 driving wrenches that fit
Ford, GM, Chrysler and Jeep, 7/8 in.,
32 mm, 36 mm, 40 mm thin and new
47 mm size to fit Ford 6.0L and 6.4L
Powerstroke diesel pickup, and 1-7/8 in.
and 2 in. are still included in the set.
•Comes in blow-molded case for storage.
69300 Master
Relay Test Jump Set
•Magnetic glove dispenser conveniently
attaches to your toolbox or any ferrous
metal surface.
•Two large magnets hold the dispenser
in place, or mount it on a wall using the
screw slots provided.
•Fits all common sizes of disposable
glove boxes, both 50 and 100 packs.
•8 jumpers to fit most popular relays.
•Allows testing of relay configurations not
covered by 8 relay test jumpers, like BMW
and other European vehicles.
46800
Master Inner Tie Rod Tool Set
•Includes all 9 crowsfeet to work on many
applications.
•The inner tie rod can be removed and
installed without removing the rack.
•Fits applications on cars and light trucks.
•Crowsfeet sizes: 29 mm, 1-3/16 in., 1-1/4
in., 32.5 mm, 1-5/16 in., 33.6 mm, 1-3/8
in., 1-7/16 in., and 1-1/2 in.
55700
Master Fuel Injection Test Set
•Checks fuel pressure on most port fuel
injection and throttle body injection
systems.
•Comes with adapters and gauges for
checking many types of systems.
•Adapts to work with test port, end of
hose and in-line connections.
NATS SHOW SPECIALS
13
5% OFF THE ENTIRE TITAN LINE
CALL FOR
SPECIAL
PRICING!
SPECIAL DISCOUNT ON THESE ITEMS!
51885
Vacuum Brake
Bleeder - 1 Liter
11436
Digital Circuit Tester
•For use on 6 - 48 Volt DC systems.
•LCD display provides a ëno guessí
voltage value of the circuit.
•Backlit LED indicates green for ground
or red for power.
•Provides 1-handed operation of CT and digital display of a multimeter.
•One hand free to jiggle wires, replace
fuse, or operate a switch.
•Computer safe <10mA circuit draw for
confident testing.
51408
High Temp
Infrared
Thermometer
•Temp Range: -58°F to 1202°F (-50°C to 650°C).
•Built-in laser pointer.
•D:S ratio: 8:1.
•Backlit LCD display.
•Max. and min. function.
•Automatic selection 0.1°C/1°F.
•Emissivity 0.95 ( fixed).
•Automatic data hold & auto power off.
55010
Infrared
Thermometer
•Temperature Range: -58°F to 842°F (-50°C to 450°C).
•Emissivity: 0.95; Accuracy +- 2%.
•Spot ratio: 12:1
•Auto power off: Yes
•Backlight display.
•Power supply: (1) 9V battery included.
•Laser sighting power: Class II Laser.
• Output: <1mW.
• Wavelength: 630 - 670 nm.
17203
26 Pc. Screwdriver Set
•Includes: (7) slotted: 1/4 x 1-1/2 in., 1/8 x
3 in., 5/32 x 4 in., 3/16 x 3 in., 1/4 x 6 in.,
5/16 x 6 in., and 5/16 x 8 in.
•(5) Star : T10 x 3 in., T15 x 4 in., T20 x 4
in., T25 x 4 in., and T27 x 4 in.
•(9) Phillips: PH00 x 3 in., PH0 x 3 in., PH1 x
4 in., PH2 x 1-1/2 in., PH2 x 4 in., PH2 x 6
in., PH3 x 6 in., PH3 x 6 in., and PH3 x 8 in.
• (3) Square: S1 x 4 in., S2 x 4 in., and S3 x 4 in.
•Also includes a straight pick, offset pick
and plastic rack plus clamshell.
•3/8 in. NPT.
•Max. capacity: 1 Liter (33 oz.)
•Working pressure: 71-113 PSI.
•Max. pressure: 113 PSI.
•Uses standard workshop air supply.
•Universal rubber fitting holds securely on brake bleed screw.
•Convenient hanging hook and locking trigger allows hands free operation.
•Transparent drain hose allows visual
inspection of old fluid during bleeding.
51884
Fluid Syringe
•For use with all types of automotive fluid.
•Transparent design allows viewing volume and fluid condition.
•Detachable tube with cap disassembles
for easy cleaning.
•Corrosion resistant seals withstand a
broad variety of fluid types.
•Units of measure: QT / CC.
•Maximum capacity: .21 QT / 200 CC.
19221
4 Pc. HVLP Triple Setup Spray Gun Kit
•Green Gun - 1.0 mm nozzle.
•Red Gun - 1.4 mm nozzle.
•Blue Gun - 1.7mm nozzle.
•Locking pressure regulator with gauge.
•Bonus aluminum storage/carry case.
•Spun aluminum paint cups.
•Die cast aluminum body.
•2-Step trigger control.
45207
•Non-bleeder type, gravity feed external mix.
20 Pc. Hose Clamp Assortment
•Stainless steel nozzles.
•Includes sizes: 1, 1-1/4, 1-3/4, 2,
• Adjustable spray width, air inlet and fluid outlet.
2-1/2, 3, 3-1/2 and 4 in. clamps.
14NATS SHOW SPECIALS
5% OFF THE ENTIRE CAL-VAN LINE
CALL FOR
SPECIAL
PRICING!
SPECIAL DISCOUNT ON THESE ITEMS!
74
AMP Hound
550
Boost
•Drastically reduces the amount of time needed to determine the amount of current in a fused circuit.
•Never pull a fuse again to read the current.
•Configures tools, reads current and replaces the fuse.
•Solve the problem of inadvertently resetting parasitic drains.
•Find current in all ATM, ATO, and MAXI type fuses.
•Battery operated with an automatic shut-off.
•Patent pending.
•300 cold cranking AMPs.
•Uses fast charging 12,000 mAh high capacity battery.
•Features include 12V emergency start.
•Three (3) lighting modes: Standard, Strobe, SOS.
•Includes a durable carrying case, universal USB charging
adapter, jumper cables, DC charger and an ultra-bright
LED flashlight.
560
Boost Max
78
LCD Circuit Tester
•Backlit LCD display.
•Range: 3.8V to 31.4V DC
•Accuracy: ±0.3V
•For use on 6V, 12V, 24V DC systems.
•Coiled cord with reach up to 12 ft.
•Test for voltage on both power and ground in DC circuits.
•LCD test light can be used for testing both power and
ground voltage on DC circuits.
38500
Master Harmonic
Balancer Installer Set
•Works on long reach applications on Dodge, Hemi, GM Gen III/IV and Ford 4.6 and 5.4 modular engines.
•Also work on most European vehicles including BMW and VW Toyota, Honda, Kia, and Hyundai.
•12 standard adapters and 4 long reach adapters.
39100
Ford Triton Spark Plug Extractor
•Works to extract frozen and broken off spark plug sleeves in 2004 to present Ford Triton engines.
•Specially machined guide works with extra long tap and extractor.
•450 cold cranking AMPs.
•Uses fast charging 18,000 mAh high capacity battery.
•Jump-starting of trucks, cars, boats, ATV, etc.
•Charges phones, tablets, laptops, notebooks, etc.
•Four different types of charging modes: 5V/2A, 5V/1A,
19V/3.5A, and 12V/10A.
•Built in safety protection for jump starter overcharging.
•Comes in a case with all the attachment connectors and
cables for electronics.
39300
Three Valve Ford
Triton Insert Repair Kit
•Insert size: m16-1.5
•Designed to aid in the repair of a common problem in the Ford Triton family of motors.
•For use on three valve 5.4 L and 6.8 L engines and 3-valve 4.6 L engines built before 2007 and for 2004 -2008 Ford, Lincoln and Mercurys.
39200
Ford Triton Spark Plug
Porcelain Extractor
•Used to extract the broken porcelain from broken spark plugs in 2003 to current Ford Triton engines.
•Tool adheres to the porcelain using a special perma-bond and then
allows a user to extract the broken porcelain from the sleeve.
NATS SHOW SPECIALS
15
5% OFF THE ENTIRE WILMAR LINE
CALL FOR
SPECIAL
PRICING!
SPECIAL DISCOUNT ON THESE ITEMS!
W89733
Cooling
System
Pressure
Test Kit
W942
6 Pc. Hook and Pick Set
•Straight, angled and combination picks.
• Durable double injection molded handles.
•Handy storage tray included.
W89725
Slide Hammer Puller Set
•Contains slide hammer with multiple
attachments including 2/3 in. jaw, internal
and external pullers, rear axle puller,
locking pliers adaptor, puller hook and
dent puller and instructions.
W50045
2.4 in. LCD
Inspection
Camera
W185
151 Pc. Ratcheting Crimper Set
•Designed for 10 to 22 gauge wire.
•Includes 150 piece assortment of 10-22 gauge connectors.
W1642
2 Ton Low Profile Jack
BC-14
14 in. Bolt Cutter
•Drop forged heat treated alloy steel
construction handles and jaws.
•Rubber hand grips.
•1/4 in. maximum cutting capacity.
W10012
5 Gallon Tire Bead Seater
•Heavy duty ball valve on both air inlet
and exhaust port.
•Designed to seat tires on the bead of
wheel simply, safe and fast.
•Can work on tires up to 24-1/2 in.
• Detects internal engine leaks caused by blown head gaskets and or cracked block heads.
•Reveals external cooling system leaks.
•Kit includes high quality hand pump and 12 adapters to fit the most popular domestic and import cars and light trucks.
•Great for cars and light duty trucks.
•Rubber saddle pad and dual pistons for
faster lift.
•Lift range: 2-3/4 in. to 20 in.
•Load capacity: 4,000 lbs.
M613
50 ft. x 3/8 in. Hybrid Hose and Reel
•Retractable reel with fully enclosed case.
•Automatic roller guide.
• Extremely flexible blend of rubber and PVC.
•Bend restrictors at each end for long life.
•1/4 in. NPT brass male fittings.
•Maximum working pressure: 300 PSI.
•Color LCD monitor and 180° image rotation and mirroring.
•40 in. (iM) flexible neck.
•TV/video output jack.
•Useful for inspecting engine compartment, valves, A/C vents, plumbing pipes, under or around furniture and appliances etc.
•Includes mirror, hook clip, magnet and video cable and 4 AA batteries.
W50068
Electric
Blower
1200 CFM
•Moves 1,200 cubic feet per minute of air.
•Feel the air flow up to 30 ft. away.
•Sets in four different positions for
concentrated air flow and fast drying.
•3-speed switch for air speed levels.
•Grounded outlets and CSA approved.
16NATS SHOW SPECIALS
FEATURED DISCOUNTED ITEMS
CALL FOR
SPECIAL
PRICING!
FEATURING!
ES5000
1500 Peak AMP 12 Volt
Jump Starter
•400 cranking AMPs.
•43 in. #4 AWG cables
•Hot Jaw clamps.
•LED battery status display.
•Automatic charging.
ES1224
3000/1500 Peak AMP 12/24
Volt Jump Starter
•800/400 cranking AMPs.
•60 in. #2 AWG cables.
•Hot Jaw clamps.
•LED battery status display.
•Automatic charging.
•Easily switches voltages.
•AWS - advanced warning system.
BA7
12 Volt
Digital
Battery and
System Tester
PL2310
6/12 Volt
10/6/2A Battery
Charger / Maintainer
•Fully automatic operation.
•Multi-stage charging.
•Temperature compensation.
•Enhanced maintenance mode.
•Battery repair mode.
PL2510
6/12 Volt
10/6/2/55A
Battery Charger /
Maintainer / Starter
•Fully automatic operation.
•Multi-stage charging.
•Temperature compensation.
•Enhanced maintenance mode.
•Battery repair mode.
•100A engine starting assistance.
PL3750
6/12/24 Volt
60/40/15/5A
Wheeled Battery
Charger with
Engine Start
JNC660
1700 Peak
AMP 12 Volt Jump Starter
•425 cranking AMPs.
•46 in. #2 AWG cables.
•Hot Jaw clamps.
•Battery status voltmeter.
•Automatic charging.
•Service coupon.
•Auto charging mode.
•60/40/15/5A 6/12 Volt charging rates.
•30/15/5A 24V
charging rates.
•Multi-stage charging.
•275A engine starting assistance.
•Battery repair mode.
•LED display with detailed charging progress.
•7-15V operating range
•100-1200 CCA testing capacity
•Tests flooded, AGM, spiral wound and gel cell batteries.
•Tests starter and alternator performance.
•7-segment display.
BA327
1.5 - 30V
Operating Range
6 and 12 Volt Battery Testing
•40-2000 CCA testing capacity.
•Tests flooded, AGM, spiral wound, gel cell and start-stop batteries.
•12 and 24 Volt system testing.
•Tests starter and alternator performance.
•10 ft. cable leads.
•Temperature compensation.
•Integrated printer.
•Includes storage case.
4735
6/12 Volt
40/20/5/200A
Wheeled Battery
Charger
•40/20/5A 12V charging rates.
•40A 6V charge rate.
• 200A 12V engine starting.
•Ammeter shows charging progress.
•Full size clamps penetrate battery corrosion.
NATS SHOW SPECIALS
17
SHOW SPECIALS ON SELECT ITEMS
CALL FOR
SPECIAL
PRICING!
FEATURING!
KS400
Professional
Heavy Duty
Industrial
Jump Starter
•Replaceable cables, field serviceable design.
•Impact resistant case with rubber base.
•22Ah sealed AGM battery provides
powerful “Best in Class” performance.
•Jump-Starts without another vehicle.
•Plastisol coated 400 AMP steel clamps
•12V 600mA internal charger.
•Digital LED display.
•Built-in digital voltmeter.
•5V USB power port and male DC cord.
•MADE in USA of US and imported parts.
3100
ATEC Portable Smart Charger
6/12 Volt Full-Rate Charger
with 100 Amp Engine Start
•LED digital display.
•Continuous rating 12V 15/2 AMP.
•100A engine start 12V.
•Automatic 6V position for lower voltage
requirements.
• Designed for standard, AGM, gel batteries.
3055
ATEC Portable Smart Charger
6/12 Volt Full-Rate Charger
with 55A Engine Start
•Continuous rating 12V 10/2 AMP.
•55A engine start 12V.
9002
ATEC Fully
Automatic
12 Volt 1.5 AMP
Underhood
Battery Charger
•Automatically powers on when needed.
•Input Rating: 120V, 60Hz, 0.3 AMP.
•Shuts down when battery is fully charged.
• LED charging light indicates charging status.
•Reverse polarity and short circuit protection.
•For non-seasonal and cold weather
maintenance of automotive batteries.
•Safe for all battery types.
12-1018
ATEC
2.4 Watt
LED COB
Folding
Straight Light
•180° magnet base.
•Provides 180-220 Lumens.
•3.7V 2200 mAH Li-Ion rechargeable battery.
•Up to 2.5 - 3.5 hours of continuous use.
•360° magnetic hook with belt clip function
•Dust and water resistant enclosure.
US20
6/12 Volt
40/40/10 AMP
Manufacturer’s Boost
Wheel Charger with
90 Minute Timer
•40 AMP continuous rating at 6/12 Volts
•200 AMP cranking assist with a full 330 AMP manufacturer’s
boost rating.
•90 minute timer with hold.
•Fan cooling mechanism prevents overheating.
•“Safe in Any Weather” operation.
6012
6/12 Volt
70/60 AMP Charger
• 250 AMP crank assist.
• 6.5 ft. AWG DC leads.
•Fan cooling mechanism prevents
overheating.
•“Safe in Any Weather” operation.
•400 AMP insulated clamps.
6002B
6/12/18/24 Volt
100/80/50/40 AMP
Heavy Duty
Commercial Charger
•Rated up to 80 AMP continuous charge.
•400 AMP crank assist at 12 Volts.
•Fan cooling mechanism
prevents overheating.
•500 AMP fully insulated “Flexi-Spring” clamps.
•“Safe in Any Weather” operation.
ESS6008MSK
12 Volt
60/70/270 AMP
Boost Smart
Charger and
Power Supply
•70 AMP continuous clean power supply for vehicle re-flash and diagnostics.
•15 AMP continuous, 20 AMP memory saver port with cable.
•Dead battery override switch for deeply discharged batteries.
• Electrical stability system (ESS™) technology.
•Terminal covers to prevent positive battery clamp from arcing.
18NATS SHOW SPECIALS
5% OFF THE AMERICAN POWER PULL LINE
635
3 Ton Series Chain Pullers
SPECIAL DISCOUNT
ON THESE ITEMS!
•Heat treated, steel construction.
•Drop forged safety hooks.
•Rated capacity: 3 Ton.
•Standard lift: 5 ft.
•Net weight: 42 lbs.
•New lifetime warranty.
72A
2 Ton Power Pull
420
2 Ton Series Chain Blocks
•Heat treated thick steel construction.
•Triple geared, drop forged safety hooks.
•Standard lift: 10 ft.
•Net weight: 40 lbs.
•New lifetime warranty.
•Leverage: 36:1.
•Cable: 3/16 in.
•6 ft. pull.
•Releases load one notch-at-a-time
•One-piece pulley wheel, for longer cable life.
•Cast aluminum ratchet wheel.
•Rust resistance,
•Contour grip.
•Drop forged steel safety hooks weight: 8.1 lbs.
•Lifetime warranty.
•Made in the USA.
18600
2 Ton Cable Puller
CALL FOR
SPECIAL
PRICING!
•2 Ton dual ratchet drive.
•Cable limiter, keeps two wraps of cable on the ratchet wheel.
•Laminated steel ratchet wheel.
•6 ft. pull.
•Rust resistance.
•Drop forged safety hooks.
•New 25 year warranty.
18650
4 Ton Cable Puller
•4 Ton dual ratchet drive.
•6 ft. pull.
•Rust resistance.
•Drop forged safety hooks.
•New 25 year warranty.
10% OFF THE ENTIRE E-Z RED LINE
FEATURING!
MS1900
Super Heavy Duty
19 in. Monster Scraper
XL3300
COB Extreme Light
Rechargeable Work Light
•3 Watt COB LED.
•3.7V 4400 mAh Li-Ion.
•360 degree rotating hook.
•450 Lumens high, 250 Lumens low.
•Run time up to 4 hrs. high / 7 hrs. low.
XL3300
XL3300FL-O
XL3300FL-B
XL3300FL-G
Red
Orange
Blue
Green
•Rugged aluminum body.
•Comfortable poly foam grip.
•Store up to 15 extra blades in the handle.
MS4000
Automotive Memory Saver
•NOW WITH BUILT-IN CHARGER!
•12 Volt, 4.4 AMP.
•Direct wired OBDII connector plug directly into the vehicles OBDII port.
•Green and amber LED lights.
•Saves all drive-ability codes and settings when disconnecting/charging a vehicle’s starter battery.
PCOB
Pocket Cob Light Stick
•Pocket Clip
•150 Lumens.
•Magnetic base is 2X stronger.
•Weather resistant button.
•7 hr. run time on 3 AAA batteries.
NATS SHOW SPECIALS
19
SHOW SPECIALS AND COMBO DEALS
PWS SERIES COMBO DEAL!
CALL FOR
SPECIAL
PRICING!
EX STANDARD SERIES COMBO DEAL!
Standard Series Combos
PWSRC4118TX
41 in. Extreme Portable Workstation® and
11 Drawer Roller Cabinet Combo in Red
•41 in. W x 18 in. D x 63 in. H.
•39 combination wrench holders.
•47 screwdriver/ratchet/extension slots.
•(160) 1/4, 3/8 and 1/2 in. socket pegs.
•Power Tool rack with built-in power strip.
•Additional storage under socket panel.
•Heavy duty steel construction with welded seams.
•Gas strut to support lop lid.
•Drawers use ball bearing slides.
•Drawer load rated 100-200 lbs. per drawer.
•Weather resistant, textured powder coat finish.
•(4) 5 x 2 in. casters, 2 locking swivels and 2 rigid.
•Heavy duty steel construction.
•2 gas lifts to support top lid.
•Drawers use ball bearing slides.
• Drawers load rated 100-200 lbs.
SIDE CABINETS
•High gloss powder coat finish.
SOLD
SEPARATELY!
•Polished solid aluminium drawer pulls.
•2 side handles on top chest.
•Chrome side handle on roller cabinet.
•(6) 5 x 2 in. casters, 4 locking swivels and 2 rigid.
•Drawer liners included.
41 in. 8 Drawer Top
Chest and 41 in. 11
Drawer Roller Cabinet
EX4181CRBK Black
EX4181CRBL Blue
EX5621CRBL
56 in. 10 Drawer Top Chest
and 56 in. 11 Drawer
Roller Cabinet in Blue
RX Series 72 in. 19 Drawer Roller Cabinet
•72 in. W x 25 in. D x 47 in. H.
•Drawers use ball bearing slides.
•Drawers load rated 100-200 lbs. per drawer.
•Quick release, self-latching drawer pull mechanism.
•High gloss powder coat finish.
•(6) 6 x 2 in. casters, 4 locking swivel and 2 rigid.
•Polished, solid extrusion aluminium drawer pulls.
•Secure, tubular coded lock and key.
•Drawer liners included.
Show specials apply to available colors shown in ad.
72 in. 19 Drawer Roller Cabinet
RX722519RCBK
Black
RX722519RCBL
Blue
20NATS SHOW SPECIALS
SHOW SPECIALS ON SELECT ITEMS
20% OFF SELECT PUNCH & CHISEL SETS
20% OFF SELECT DOMINATOR ITEMS
DOMINATOR® Pry Bars
Punch and Chisel Sets
•Chisels are used to cut and shape metals and available in a variety of lengths and sizes.
•Punches pierce or mark metal, scribe lines, align holes and
drive out and remove pins.
•Made of premium steel with black oxide finish.
•Made from hardened and tempered steel.
•Ergonomic designed handle.
•Capped end handle allows the user to strike the bar
without causing damage to the handle.
61356
3 Pc. Heavy Duty Pry Bar Set
61019
19 Pc. Punch & Chisel Set
61044
14 Pc. Punch & Chisel Set
Other Eligible Sets:
62254
12 Pc. Pilot Punch Kit
61005
60560
61050
61355
3 Pc. Screwdriver Pry Bar Set
40162
58-C Pry Bar
40160
40139
40138
15% OFF SELECT BRASS SETS
•Inhibit sparking.
•Used for non-marring applications.
•Made of consumable brass and will not mar steel.
•Different sizes available.
61360
3 Pc. Drift Punch Set
60146
60004
10% OFF SELECT EXTRACTOR SETS
Brass Sets
61369
15 Pc. Master Punch
and Chisel Set
Other Eligible Items:
Extractor Sets
•Made from hardened premium steel for easy removal of damaged screws.
•Used for removing broken or seized screws.
•Fluted cutting edges for cutting into screw shaft.
67006
6 Pc. Pin Punch Kit
61365
Heavy Duty Punch Set
37345
10 Pc. Screw
Extractor Set
37332
5 Pc. Screw
Extractor Set
37331
4 Pc. Screw
Extractor Set
NATS SHOW SPECIALS
21
5% OFF THE ENTIRE LEGACY LINE
Except Garden Hose and Repair Fittings
FEATURING!
L8250FZ
3/8 in. x 50 ft.
Air Hose Reel
•Auto retract auto latch hose mechanism.
•Durable polypropylene.
•Adjustable hose stopper.
•3 ft. lead-in hose.
Flexzilla Air Hoses
HFZ3804YW2B
4 ft. Whip Hose with Ball Swivel
• Lays flat, no memory.
•Kink resistant under pressure.
•Extreme all-weather flexibility, even in sub-zero temperatures (-40° to 140°F).
•Maximum working pressure: 300 PSI.
• Includes bend restrictor that reduces wear
and tear, prolonging the life of the hose.
QUALIT Y AND INNOVATION SINCE 1908
12006
13 Watt Bounce Lite®
HFZWP550
Flexzilla 5/8 in. x 50 ft. Water Hose
•Flexzilla water hoses offer superior
flexibility for tight radius bends in both cold
and warm environments.
•Engineered polymer-blend material.
•Also features anodized aircraft aluminum
male and female fittings.
• Abrasion resistant with superior bend radius.
•Material: premium hybrid polymer working pressure: 165 PSI at 70°F.
•Lays flat, no memory.
•Kink resistant under pressure.
•Extreme all-weather flexibility, even in sub-zero temperatures (-40° to 140°F).
•Maximum working pressure: 300 PSI.
• Includes bend restrictor that reduces wear
and tear, prolonging the life of the hose.
HFZ3850YW2
3/8 in. x 50 ft. ZillaGreen Air Hose
•With 1/4 in. MNPT ends.
HFZ3835YW2
3/8 in. x 35 ft. ZillaGreen Air Hose
•With 1/4 in. MNPT ends.
HFZ1250YW3
1/2 in. X 50 ft. ZillaGreen Air Hose
•With 3/8 in. MNPT ends.
10% OFF THE ENTIRE CENTRAL LINE
CALL FOR
SPECIAL
PRICING!
ADDITIONAL DISCOUNT ON THESE ITEMS!
•25 ft. SJTOW cord.
•Bounces instead of breaking.
•Fully enclosed safety switch.
•Patented for superior impact protection.
•Features patented Bounce-Bulb® technology.
3M430A
Digital Rotor Gage
•Depth rod for measuring pad wear.
•Pointed anvil and 3.50 in. long arms to inspect rotors before
turning or replacing them.
•Improved anvil and arm design to better get into tight spaces.
•Easy to read digital display with inch / metric conversion.
•0 - 4.00 in./0 - 100 mm Range with .001 in./.01 mm graduations.
3D102
0 - 1 in. Dial Indicator Set
with On/Off Magnetic Base
•Range: 0 - 1 in.
•.001 in. Graduations.
•On/Off magnetic base with flex-arm.
97353A
1/2 in. Ratchet 30 to 250 ft.-lb. Range
•48 to 322 Nm of torque.
•Push through ratchet instead of a reversible ratchet.
•Asymmetric design of clicker and ratchet mechanism creates
a more robust construction and durable wrench.
•Improved lock collar design is easier to grip.
22NATS SHOW SPECIALS
5% OFF THE ENTIRE KEN TOOL LINE
FEATURING!
29999
ValveCapper®Pro
•The ValveCapper®PRO is 11.8 in. long.
•Molded from glass-filled nylon.
•Used to reach to the inside dual tire’s
valve stem without discomfort or risk of
burns from hot wheel components.
•Each end of the tool features a flexible
thermoplastic rubber grip.
•One end is designed to fit over and
remove the valve cap and the other end
features a valve core remover that grips
and holds the valve core.
29999M
ValveCapper®Pro
25 Pack Display
•Showcases the ValveCapper®PROs in an appealing clear display and includes a tethered demo valve stem so potential customers can see
how the tool works and try it for themselves.
35775S
6 Pc. SAE 8-1
Wrench Display
•Includes the 8 most popular sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4 in.
•The “Stud-Thru” feature permits studs
and bolts to pass through the opening.
•12 pt. closed box design needs only a 30°
re-engagement arc for tight clearances.
•Designed for tires for turf care
equipment, golf carts, all-terrain vehicles
and personal mobility scooters, which are
too small to be safely placed in a large
passenger or truck tire cage.
•NOT to be used on highway tires, nor NHS
industrial tires or multi-piece wheels.
•4 bars are made of high-grade steel.
•17-3/8 in. L x 10-1/2 in. W x 25-3/8 in. H.
•Weighs 24 pounds.
35776M
6 Pc. Metric 8-1 Wrench Display
•Includes 10 mm, 11 mm, 12 mm, 13 mm,
14 mm, 15 mm, 16 mm and 17 mm sizes.
•The “Stud-Thru” feature permits studs and
bolts to pass through the opening.
•12 pt. closed box design needs only a
30° re-engagement arc for tight.
Automotive Hammers
•Features anti-marring replaceable
hammer face that is safe for use on
steel, aluminum, and chrome.
•Replaceable chromoly steel hook
removes all clip on wheel weights
such as lead, zinc, and steel with no
modification needed to fit smaller
weights.
•Fiberglass handle with ergonomic
industrial grip is chemical resistant
and 4X stronger than wood.
•The hammer’s greater mass and
large strike face allows a technician
to efficiently install the wheel weight
with a single blow.
36000
Utility Tire Cage
35361
Automotive Wheel
Weight Hammer
•11 in. long and weighs 1 lbs.
35359
HD Wheel
Weight Hammer
•12 in. long and weighs 3 lbs.
•Designed for use in a heavy duty
commercial environment.
29980
ReCore TPMS Sensor Saver Kit
•Repair a corroded valve stem in 10 - 15 minutes!
•No need to remove the tire or wheel from the vehicle!
•Includes: 12 TPMS reCore Sensor Savers, TPMS valve core torque tool, high
speed dual cutter countersink drill bit,
precision tap, tap holder with T-handle,
bottle Ken-LokTM thread sealant, easy
to follow instructions, and blow-molded
plastic storage case.
•Patented by Ken-Tool.
29981
ReCore Refill
•Includes 25 TPMS Sensor Savers plus a fresh tap.
NATS SHOW SPECIALS
23
5% OFF THE ENTIRE SK LINE
91848
48 Pc. 1/4 in. Dr. 6 Pt.
Fractional and Metric
Deep Chrome Socket Set
CALL FOR
SPECIAL
PRICING!
SPECIAL DISCOUNT ON THESE ITEMS!
•4.5 in. Pro ratchet, 2 in. and 6 in. extensions.
•1/4 in. F-3/8 in. M adapter, 3/8 in. F-1/4 in. M adapter.
•Standard SAE sockets: 3/16, 7/32, 1/4, 93/32, 5/16, 11/32, 3/8, 7/16, 1/2 and 9/16 in.
•Deep SAE sockets: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 and 9/16 in.
•Standard Metric sockets: 4 - 15 mm.
•Deep Metric sockets: 6 - 15 mm.
94549
49 Pc. 3/8 in. Dr. 6 Pt.
Fractional and Metric
Chrome Socket Set
•7.5 in. Pro ratchet, 1.5 in. Pro thumbwheel ratchet.
•3 in. and 6 in. extensions and universal joint.
•Standard SAE sockets: 1/4 in. - 7/8 in.
•Deep SAE sockets: 3/8 in. - 7/8 in.
•Standard Metric sockets: 6 - 19 mm.
•Deep Metric sockets: 10 - 19 mm.
33351
10 Pc. 3/8 in. Dr. Metric
Swivel Socket Set
•SureGrip hex design drives the side of the fastener, not the corner.
•30° flex angle improves access.
•Sizes include: 10 - 19 mm.
•Packaged in a plastic tray.
86006
9 Pc. SurGrip
Screwdriver Set
•SureGrip comfortable square handles.
•Set includes: Philips #0 x 3 in., #1 x 4 in., #2 x 2-1/2 in.,
#2 x 4 in., Slotted 1/4 in. x 2-1/2 in., 1/4 in. x 4 in., 5/16 in. x 6 in., 3/8 in. x 8 in., and 3/8 in. x 12 in.
•SureGrip vapor blasted tips.
•Plastic storage tray.
4147
47 Pc. 1/2 in. Dr. Fractional
and Metric, Standard, Deep
12 Pt. Chrome Socket Set
•Patented SuperKrome finish for durability and maximum corrosion resistance.
•10.3 in. Pro ratchet; 2 in. and 5 in. extensions.
•Standard SAE sockets: 1/2 in. – 1-1/8 in.
•Deep SAE sockets: 1/2 in. – 15/16 in.
•Standard Metric sockets: 10 – 17 mm.
•Deep Metric sockets: 10 – 19 mm.
89039
33 Pc. 1/4 in. and 3/8 in.
Dr. Screwdriver Bit Set
•Provides for long life and maximum corrosion resistance.
•Through-hole design makes it easier to replace worn or broken bits.
•Bits made from high strength S2 steel; C-Clip retention
groove in hex end provides secure hold on bit.
•Includes 6 TORX 1/4 in. drive bit sockets, 4 TORX 3/8 in.
drive bit sockets, 16 hex bit sockets, 3 slotted screwdriver
bit sockets, 3 Phillips screwdriver bit sockets, and
POZIDRIV screwdriver bit socket.
33300
8 Pc. 3/8 in. Dr Fractional 6 Pt.
Swivel Socket Set
•SureGrip hex design drives the side of the fastener, not the corner.
•30° flex angle improves access.
•Packaged in a convenient plastic tray.
•Inlcudes: 5/16, 3/8, 7/16, 1/2,
9/16, 5/6, 11/16 and 3/4 in.
•Made in the USA.
17842
3 Pc. Pliers Set
•Set contains: 7 in. long nose
pliers, 9 in. linesman pliers, 8 in. HD diagonal pliers.
•Packaged in a pouch.