McGRAW-EDISON ®
D es c r iption
The Galleon™ LED luminaire delivers exceptional performance in a
highly scalable, low-profile design. Patented, high-efficiency AccuLED
Optics™ system provides uniform and energy conscious illumination to
walkways, parking lots, roadways, building areas and security lighting
applications. IP66 rated and UL/cUL Listed for wet locations.
Type
Catalog #
Project
Date
Comments
Prepared by
Spe c ific a tion Feat u r es
C on s t r u c t i o n
Extruded aluminum driver
enclosure thermally isolated from
Light Squares for optimal thermal
performance. Heavy-wall, diecast aluminum end caps enclose
housing and die-cast aluminum
heat sinks. A unique, patent
pending interlocking housing and
heat sink provides scalability with
superior structural rigidity. 3G
vibration tested. Optional toolless hardware available for ease
of entry into electrical chamber.
Housing is IP66 rated.
Optics
Choice of 12 patented, highefficiency AccuLED Optics™
manufactured from injection
molded acrylic. Optics are
precisely designed to shape
the distribution maximizing
efficiency and application spacing.
AccuLED Optics create consistent
distributions with the scalability
to meet customized application
requirements. Offered standard in
4000K (+/- 275K) CCT and nominal
70 CRI. Optional 6000K CCT and
3000K CCT (80 CRI).
El e c tri c a l
LED drivers are mounted to
removable tray assembly for ease
of maintenance. 120-277V 50/60Hz,
347V 60Hz or 480V 60Hz operation.
Shipped standard with Cooper
Lighting proprietary circuit module
designed to withstand 10kV of
transient line surge. The Galleon
LED luminaire is suitable for
operation in -40°C to 40°C ambient
environments. For applications
with ambient temperatures
exceeding 40°C, specify the HA
(High Ambient) option. Light
Squares are IP66 rated. 90% lumen
maintenance expected at 60,000
hours.
120° apart, the EA extended arm
may be required. Refer to the arm
mounting requirement table on
page 3. For wall mounting, specify
wall mount bracket option. 3G
vibration rated.
Fin ish
Housing finished in Super durable
TGIC polyester powder coat paint,
2.5 mil nominal thickness for
superior protection against fade
and wear. Heat sink is powder
coated black. Standard colors
include black, bronze, grey,
white, dark platinum and graphite
metallic. RAL and custom color
matches available. Consult the
McGraw-Edison Architectural
Colors brochure for the complete
selection.
Mounti ng
Warran ty
Extruded aluminum arm includes
internal bolt guides allowing for
easy positioning of fixture during
assembly. Designed for pole or
wall mounting. When mounting
two or more luminaires at 90° or
Five-year warranty.
GLEON
GALLEON LED
1-10 Light Squares
Solid State LED
Area/Site Luminaire
D ime ns ions
POLE MOUNT
3-15/16"
[100mm]
21-3/4" [553mm]
“A”
"B"
WALL MOUNT
Ce r t i f i c a t i o n D a t a
7" [178mm]
6-3/16"
[157mm]
2-7/16"
[61mm]
DIMENSION DATA
Number of
Light Squares
“A” Width
“B” Standard
Arm Length
“B” Optional
Arm Length 1
Weight with Arm
(lbs.)
EPA with Arm 2
(Sq. Ft.)
1-4
15-1/2" (394mm)
7" (178mm)
10" (254mm)
33 (15.0 kgs.)
0.96
5-6
21-5/8" (549mm)
7" (178mm)
10" (254mm)
44 (20.0 kgs.)
1.00
7-8
27-5/8" (702mm)
7" (178mm)
13" (330mm)
54 (24.5 kgs.)
1.07
9-10
33-3/4" (857mm)
7" (178mm)
16" (406mm)
63 (28.6 kgs.)
1.12
UL/cUL Wet Location Listed
ISO 9001
LM79 / LM80 Compliant
3G Vibration Rated
ARRA Compliant
DesignLights Consortium® Qualified*
IP66 Rated
Energy Data
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
120V-277V 50/60Hz
347V & 480V 60Hz
-40°C Min. Temperature
40°C Max. Temperature
50°C Max. Temperature (HA Option)
ER
C
*www.designlights.org
YS
TEM
S
S
NOTES: 1. Optional arm length to be used when mounting two fixtures at 90° on a single pole. 2. EPA calculated with optional arm length.
D
21-3/4" [553mm]
10-5/32"
[256mm]
TIFIE
ADH120541
2013-10-01 09:53:38
G L E ON G A L L EO N L ED
Power a nd Lum e ns b y L i g ht S q u a r e C o u n t
Number of Light Squares
1
2
3
4
5
6
7
8
9
10
Power (Wattage)
51
103
154
206
257
309
360
412
463
515
Current @ 120V (A)
0.43
0.86
1.29
1.72
2.15
2.58
3.01
3.44
3.87
4.30
Current @ 277V (A)
0.19
0.38
0.57
0.76
0.95
1.14
1.33
1.52
1.71
1.90
Optics
Lumens
T2
BUG Rating
Lumens
T3
BUG Rating
Lumens
T4
BUG Rating
Lumens
SL2
BUG Rating
Lumens
SL3
BUG Rating
Lumens
SL4
BUG Rating
5MQ
5WQ
5XQ
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
RW
BUG Rating
SLL/SLR
Lumens
BUG Rating
L umen M ul tipl ie r
Ambient
Temperature
Lumen
Multiplier
10°C
1.04
15°C
1.03
25°C
1.00
40°C
0.96
50°C
0.92
3,873
8,372
12,245
16,131
19,993
23,493
27,458
31,329
35,095
38,720
B1-U0-G1
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
B4-U0-G4
B4-U0-G4
B4-U0-G4
B4-U0-G4
3,858
8,340
12,198
16,069
19,916
23,403
27,353
31,209
34,961
38,572
B1-U0-G1
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B4-U0-G4
B4-U0-G4
B4-U0-G4
B4-U0-G4
B4-U0-G5
3,699
7,995
11,694
15,405
19,093
22,436
26,222
29,919
33,516
36,978
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
3,795
8,201
11,996
15,803
19,586
23,015
26,899
30,692
34,382
37,933
B1-U0-G1
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,748
8,101
11,849
15,609
19,345
22,732
26,569
30,314
33,959
37,467
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
3,811
8,237
12,048
15,871
19,671
23,115
27,016
30,824
34,530
38,097
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
4,070
8,797
12,867
16,951
21,009
24,687
28,853
32,921
36,879
40,688
B2-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
4,046
8,745
12,791
16,850
20,884
24,540
28,681
32,725
36,659
40,446
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G4
3,947
8,531
12,478
16,437
20,373
23,940
27,979
31,924
35,762
39,456
B2-U0-G1
B3-U0-G3
B4-U0-G3
B4-U0-G4
B5-U0-G4
B5-U0-G5
B5-U0-G5
B5-U0-G5
B5-U0-G5
B5-U0-G5
3,867
8,359
12,226
16,106
19,962
23,457
27,415
31,280
35,041
38,660
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B4-U0-G4
B4-U0-G4
B4-U0-G4
B4-U0-G4
B5-U0-G5
B5-U0-G5
3,625
7,835
11,459
15,096
18,710
21,986
25,696
29,319
32,844
36,236
B1-U0-G2
B1-U0-G3
B2-U0-G4
B2-U0-G5
B2-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
L u m e n Ma i n t e n a n c e
L igh t Square Op erat ion wit h 2 L Bi- le v el Switching
Ambient
Temperature
TM-21 Lumen
Maintenance
(60,000 Hours)
Theoretical L70
(Hours)
25°C
> 94%
> 350,000
40°C
> 93%
> 250,000
50°C
> 90%
> 170,000
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Number of
Light Squares
Circuit 1
Circuit 2
1
N/A
N/A
2
1
1
3
2
1
4
2
2
5 (120-277V only)
3
2
6 (120-277V only)
3
3
7
4
3
8
4
4
9
5
4
10 (120-277V)
5
5
10 (347-480V)
6
4
Specifications and
dimensions subject to
change without notice.
ADH120541
2013-10-01 09:53:38
G L E ON G A L L EO N L ED
Optic O r ie nta tion
D rilling Pat t ern
Street Side
Street Side
TYPE "N"
Street Side
2"
[51mm]
1-3/4"
[44mm]
3/4" [19mm]
Diameter
Hole
7/8" [22mm]
(2) 9/16" [14mm]
Diameter
Holes
House Side
House Side
House Side
Optics Rotated Left @ 90° [L90]
Standard
Optics Rotated Right @ 90° [R90]
A r m Mo unting Re quir e m e n t s
Configuration
90° Apart
120° Apart
GLEON-AA-01
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AA-02
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AA-03
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AA-04
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AA-05
10" Extended Arm
(Required)
7" Arm
(Standard)
GLEON-AA-06
10" Extended Arm
(Required)
7" Arm
(Standard)
GLEON-AA-07
13" Extended Arm
(Required)
13" Extended Arm
(Required)
GLEON-AA-08
13" Extended Arm
(Required)
13" Extended Arm
(Required)
GLEON-AA-09
16" Extended Arm
(Required)
16" Extended Arm
(Required)
GLEON-AA-10
16" Extended Arm
(Required)
16" Extended Arm
(Required)
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
4 @ 90°
2 @ 180°
Triple1
2 @ 90°
Triple2
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
2 @ 120°
ADH120541
2013-10-01 09:53:38
G L E ON G A L L EO N L ED
Order in g I nfor m a tion
Sample Number: GLEON-AA-04-LED-E1-T3-GM
Product Family 1
Light Engine
GLEON=Galleon
AA=1A,
UL Class 2
Number of
Light Squares 2
01=1
02=2
03=3
04=4
05=5
06=6
07=7
08=8
09=9
10=10
Lamp Type
Voltage
Distribution
Color
Mounting
LED=Solid State
Light Emitting
Diodes
E1=120-277V
347=347V 3
480=480V 3
T2=Type II
T3=Type III
T4=Type IV
SL2=Type II w/Spill Control
SL3=Type III w/Spill Control
SL4=Type IV w/Spill Control
5MQ=Type V Square Medium
5WQ=Type V Square Wide
5XQ=Type V Square Extra Wide
RW=Rectangular Wide
SLL=90° Spill Light Eliminator Left
SLR=90° Spill Light Eliminator Right
AP=Grey
BZ=Bronze
BK=Black
DP=Dark Platinum
GM=Graphite Metallic
WH=White
[Blank]=Arm for Round or
Square Pole
EA=Extended Arm 4
MA=Mast Arm Adapter 5
WM=Wall Mount
Options (Add as Suffix)
Accessories (Order Separately)
2L=Two Circuits 6, 7
7060=70 CRI 6000K 8
8030=80 CRI 3000K 8
DIM=0-10V Dimming Drivers 9, 10
HA=50°C High Ambient 7
L90=Optics Rotated 90° Left
LCF=Matching Housing and Light Square Frame Color
MS/DIM-LXX=Motion Sensor for Dimming Operation 11, 12, 13, 14
MS/X-LXX=Motion Sensor for On/Off Operation 13, 14, 15
P=Button Type Photocontrol (120, 208, 240 or 277V)
R=NEMA Twistlock Photocontrol Receptacle
R90=Optics Rotated 90° Right
TH=Tool-less Door Hardware
AMBER=Amber LEDs 8
MT=Factory Installed Mesh Top
DIMRF-LW=LumaWatt Wireless Sensor, Wide Lens for 8' - 16' Mounting Height 16
DIMRF-LN=LumaWatt Wireless Sensor, Narrow Lens for 16' - 40' Mounting Height 16
OA/RA1016=NEMA Photocontrol Multi-Tap - 105-285V
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
MA1252=10kV Surge Module Replacement
MA1036-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon
MA1037-XX=2 @ 180° Tenon Adapter for 2-3/8" O.D. Tenon
MA1197-XX=3 @ 120° Tenon Adapter for 2-3/8" O.D. Tenon
MA1188-XX=4 @ 90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1189-XX=2 @ 90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1190-XX=3 @ 90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1191-XX=2 @ 120° Tenon Adapter for 2-3/8" O.D. Tenon
MA1038-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon
MA1039-XX=2 @ 180° Tenon Adapter for 3-1/2" O.D. Tenon
MA1192-XX=3 @ 120° Tenon Adapter for 3-1/2" O.D. Tenon
MA1193-XX=4 @ 90° Tenon Adapter for 3-1/2" O.D. Tenon
MA1194-XX=2 @ 90° Tenon Adapter for 3-1/2" O.D. Tenon
MA1195-XX=3 @ 90° Tenon Adapter for 3-1/2" O.D. Tenon
FSIR-100=Wireless Configuration Tool for Occupancy Sensor 17
GLEON-MT1=Field Installed Mesh Top for 1-4 Light Squares
GLEON-MT2=Field Installed Mesh Top for 5-6 Light Squares
GLEON-MT3=Field Installed Mesh Top for 7-8 Light Squares
GLEON-MT4=Field Installed Mesh Top for 9-10 Light Squares
Notes:
1. DesignLights Consortium® Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details.
2. Standard 4000K CCT and nominal 70 CRI.
3. LumaWatt Wireless Sensors not currently available for 347V or 480V applications.
4. May be required when two or more luminaires are oriented on a 90° or 120° drilling pattern. Refer to arm mounting requirement table.
5. Factory installed.
6. Not available with 6 Light Squares in 347V or 480V.
7. Not available with LumaWatt wireless sensors.
8. Consult your Cooper Lighting representative for lead times and lumen multiplier.
9. Not available with 5 or 6 Light Squares in 347V or 480V.
10. Consult your Cooper Lighting representative before ordering DIM with 2L option.
11. Replace XX with mounting height in feet for proper selection, e.g., MS/DIM-L25.
12. 120V or 277V 60Hz and 230V 50Hz only. Replace E1 with specific voltage. Consult factory for availability in 347V and 480V.
13. The FSIR-100 accessory is required to adjust parameters.
14. Not available with HA option.
15. Replace X with number of Light Squares operating in low output mode and replace XX with mounting height in feet for proper lens selection, e.g., MS/3-L25.
16. LumaWatt wireless sensors are factory installed only requiring network components RF-EM1, RF-GW1, and RF-ROUT1 in appropriate quantities. See www.cooperlighting for LumaWatt application information.
17. This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your Cooper Lighting representative for additional details.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH120541
2013-10-01 09:53:38
TM
DESCRIPTION
Pole mount arms are designed to fit both medium EMM/ECM and large
EML/ECL series housings. Arms feature a precision welded cast
aluminum mounting hub for attachment of fixture head to arm with
four (4) stainless steel fasteners. Wall mount arms compliment pole
mount luminaires and attractively transition fixture scale in lower
mounting height pedestrian environments. Wall mount arms are
designed to fit both medium EMM/ECM and large EML/ECL series
housings. Arms feature a precision welded cast aluminum mounting
hub for attachment of fixture head to arm with four (4) stainless steel
fasteners.
Type
Catalog #
Project
Date
Comments
Prepared by
A R M S S P E C I F I C AT I O N S
33 1/2" [852 mm]
33 1/2" [852 mm]
2''
[51 mm]
62" [1575 mm]
Radius
12''
[304 mm]
Radius
12''
[304 mm]
2''
[51 mm]
54 3/16''
[1376 mm]
BISHOP SINGLE POLE
MOUNT ARM
[VA6105, VA6154, VA6005,
VA6054] Slipfits over 4" round
straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 24 lbs. E.P.A: .92
54 3/16''
[1376 mm]
BISHOP SINGLE POLE MOUNT
ARM WITH CROSS ROD
[VA6106, VA6155, VA6006,
VA6055] Slipfits over 4" round
straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 25 lbs. E.P.A: .98
Radius
12''
[304 mm]
2''
[51 mm]
54 3/16''
[1376 mm]
BISHOP TWIN POLE MOUNT
ARM
[VA6107, VA6156, VA6007,
VA6056] Slipfits over 4" round
straight pole, or 4" O.D. by 6"
tall tenon.
Weight: 37 lbs. E.P.A: 1.43
62" [1575 mm]
Radius
12''
[304 mm]
2''
[51 mm]
18 7/8"
[480 mm]
35 7/8"
[911 mm]
54 3/16''
[1376 mm]
26 3/4" [679 mm]
30 15/16" [786 mm]
26 3/4" [679 mm]
BISHOP TWIN POLE MOUNT
ARM WITH CROSS RODS
[VA6108, VA6157, VA6008,
VA6057] Slipfits over 4" round
straight pole, or 4" O.D. by 6"
tall tenon.
Weight: 39 lbs. E.P.A: 1.55
TRADITIONAL SINGLE POLE
MOUNT ARM
[VA6109, VA6158, VA6009,
VA6058] Slipfits over 4" round
straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 20 lbs. E.P.A: .86
30 15/16" [786 mm]
TRADITIONAL SINGLE POLE
MOUNT ARM WITH ROUNDED
UPPER BAR
[VA6110, VA6159, VA6010, VA6059]
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.4
30 15/16" [786 mm]
30 15/16" [786 mm]
26 3/4" [679 mm]
26 3/4" [679 mm]
18 7/8"
[480 mm]
EPIC
COLLECTION
MEDIUM AND
LARGE ARM
SPECIFICATIONS
35 7/8"
[911 mm]
18 7/8"
[480 mm]
35 7/16"
[900 mm]
35 7/16"
[900 mm]
26 3/4" [679 mm]
30 15/16" [786 mm]
TRADITIONAL SINGLE POLE
MOUNT ARM WITH ROUNDED
LOWER BAR
[VA6111, VA6160, VA6011,
VA6060] Slipfits over 4" round
straight pole only.
Weight: 25 lbs. E.P.A: 1.16
www.cooperlighting.com
TRADITIONAL SINGLE POLE
MOUNT ARM WITH 45°
UPPER BAR
[VA6112, VA6161, VA6012,
VA6061] Slipfits over 4" round
straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.38
TRADITIONAL SINGLE POLE MOUNT
ARM WITH 45° LOWER BAR
[VA6113, VA6162, VA6013, VA6062]
Slipfits over 4" round straight pole only.
Weight: 25 lbs. E.P.A: 1.14
Consult your representative for additional options and finishes.
AVU070422
E P I C ARMS
A R M S S P E C I F I C A I T O N S ( C O N ’ T. )
57" [1448 mm]
53 1/2" [1359 mm]
26 3/4" [679 mm]
35 7/16 "
[900 mm]
35 7/16 "
[900 mm]
18 7/8"
[480 mm]
18 7/8"
[480 mm]
35 7/16 "
[900 mm]
26 3/4" [679 mm]
53 1/2" [1359 mm]
57" [1448 mm]
26 3/4" [679 mm]
53 1/2" [1359 mm]
57" [1448 mm]
26 3/4" [679 mm]
57" [1448 mm]
TRADITIONAL SINGLE POLE
MOUNT ARM WITH 45°
UPPER STRAP
[VA6114, VA6163, VA6014,
VA6063] Slipfits over 4" round
straight pole, or 4" O.D. by 6"
tall tenon.
Weight: 24 lbs. E.P.A: 1.17
TRADITIONAL TWIN POLE
MOUNT ARM
[VA6116, VA6165, VA6016,
VA6065] Slipfits over 4" round
straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 30 lbs. E.P.A: 1.44
TRADITIONAL TWIN POLE
MOUNT ARM WITH
ROUNDED UPPER BARS
[VA6117, VA6166, VA6017,
VA6066] Slipfits over 4" round
straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 43 lbs. E.P.A: 2.28
TRADITIONAL TWIN POLE
MOUNT ARM WITH
ROUNDED LOWER BARS
[VA6118, VA6167, VA6018,
VA6067] Slipfits over 4" round
straight pole only.
Weight: 40 lbs. E.P.A: 2.04
30 5/8" [777 mm]
Radius
12''
[304 mm]
57" [1448 mm]
53 1/2" [1359 mm]
26 3/4" [679 mm]
35 7/16 "
[900 mm]
35 7/16 "
[900 mm]
18 7/8"
[480 mm]
2''
[51 mm]
35 7/16"
[900 mm]
51 3/8''
[1306 mm]
26 3/4" [679 mm]
26 3/4" [679 mm]
53 1/2" [1359 mm]
57" [1448 mm]
53 1/2" [1359 mm]
57" [1448 mm]
TRADITIONAL TWIN POLE
MOUNT ARM WITH 45°
UPPER BARS
[VA6119, VA6168, VA6019,
VA6068] Slipfits over 4" round
straight pole, or 4" O.D. by 6"
tall tenon.
Weight: 43 lbs. E.P.A: 2.24
TRADITIONAL TWIN POLE
MOUNT ARM WITH 45°
LOWER BARS
[VA6120, VA6169, VA6020,
VA6069] Slipfits over 4" round
straight pole only.
Weight: 40 lbs. E.P.A: 2.0
TRADITIONAL TWIN POLE
MOUNT ARM WITH 45°
UPPER STRAPS
[VA6121, VA6170, VA6021,
VA6070] Slipfits over 4" round
straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 37 lbs. E.P.A: 1.81
BISHOP WALL MOUNT ARM
[VA6101, VA6150, VA6001,
VA6050] Mounts to wall with
four (4) stainless steel lag
bolts (provided by other).
Weight: 16 lbs.
30 5/8" [777 mm]
Radius
12''
[304 mm]
2''
[51 mm]
11
[29
10 1/2"
[267 mm]
35 7/16"
[900 mm]
8 3/8"
[211 mm]
11 3/4"
[298 mm]
51 3
[1306
28 1/2" [723 mm]
8 3/8" [211 mm]
28 1/2" [723 mm]
BISHOP WALL MOUNT ARM
WITH CROSS ROD
[VA6102, VA6151, VA6002,
VA6051] Mounts to wall with
four (4) stainless steel lag
bolts (provided by other).
Weight: 17 lbs.
TRADITIONAL WALL MOUNT
ARM
[VA6103, VA6152, VA6003,
VA6052] Mounts to wall with
four (4) stainless steel lag
bolts (provided by other).
W E I G H T: 1 7 L B S .
TRADITIONAL WALL MOUNT
ARM WITH 45° STRAP
[VA6104, VA6153, VA6004,
VA6053] Mounts to wall with
four (4) stainless steel
lag bolts (provided by other).
Weight: 18 lbs.
MAST ARM ADAPTER
[VA6122, VA6171, VA6022,
VA6071] Secures fixture to
nominal 2" pipe (2 3/8"
horizontal O.D.)
Weight: 4 lbs.
INVUE • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
AVU070422
INVUE ®
D ES C R IPTION
The EPIC Collection combines custom luminaire flexibility with high
quality construction. Through a modular design, the EPIC Collection can
be dressed to suit any application. Recognizing evolving environmental
and legislative trends, EPIC Collection delivers world-class LED optical
and performance solutions to the decorative luminaire marketplace.
Type
Catalog #
Project
Date
Comments
Prepared by
SP EC IFIC A TION FEA T U R E S
C on s t r u c t i o n
TOP: Cast aluminum classical top
housing maintains a nominal 1/8"
sidewall thickness. Top attaches
to cast aluminum mounting arm
hub with four (4) stainless steel
fasteners. One-piece silicone
gasket between mounting hub
and top casting seals out moisture
and contaminants. MIDSECTION:
Continuous silicone gaskets seal
lens to top casting and shade.
The following mid-section
options feature cast aluminum
construction and stainless steel
assembly hardware: SO Solid
Rings. SHADES: Heavy gauge
precision spun aluminum shades
offer superior surface finish and
consistency in form. DOORFRAME:
Die-cast aluminum 1/8" thick
door and door frame seal to
underside of shade with a thick
wall continuous silicone gasket.
Mounting hub ships attached to
mounting arm.
Optics
DISTRIBUTION: Choice of twelve
(12) patented, high efficiency
AccuLED Optics™, that maximize
light collection and direction
distribution onto the application
region. Each optical lens is
precision-manufactured via
injection-molding, then precisely
arranged and sealed on the board
media. LEDs: High output LEDs,
50,000+ hours life at >70% lumen
maintenance, offered standard in
4000°K (+/-275K) CCT and nominal
70 CRI.
module designed to withstand
10kV of transient line surge. All
LED LightBARs™ and drivers are
mounted to dedicated mounting
trays and are easily replaced by
use of quick disconnects for ease
of wiring. Options to control light
levels, energy savings and egress
capabilities (separate circuit) are
available.
Fin ish
El e c tri c a l
ELECTRICAL TRAY: Driver and
related electrical componentry
are mounted to one piece tray.
Quick disconnect wiring plugs
allows for tray removal during
routine maintenance. DRIVER:
LED drivers are potted and heat
sunk for optimal performance and
prolonged life. Standard drivers
feature electronic universal voltage
(120-277V/50-60hz), > 0.9 power
factor, less than 20% harmonic
distortion and feature ambient
temperature range of +40°C
(104°F) down to minimum starting
temperature of -30°C
(- 22°F). Shipped standard with
Cooper Lighting proprietary circuit
Maximum
Height
21"
[533mm]
Housing is finished in 5-stage
Super TGIC polyester powder coat
paint, 2.5 mil nominal thickness
for superior protection against
fade and wear. LightBAR™ cover
plates are standard white and
may be specified to match finish
of luminaire housing. Standard
colors include black, bronze, grey,
white, dark platinum and graphite
metallic. RAL and custom color
matches available. Consult Outdoor
Architectural Colors brochure for a
complete selection.
EMM EPIC
MODERN MEDIUM
LED
1 - 4 LightBARs
Solid State LED
DECORATIVE AREA
Warran ty
EMM LED features a five-year
limited warranty.
CERTIFICATION DATA
UL/cUL Listed
ISO 9001
IP66 LightBARs
ARRA Compliant
LM79 / LM80 Compliant
3.5 G Vibration Tested
ENERGY DATA
EPA
Effective Projected Area: (Sq. Ft.)
0.94
SHIPPING DATA
Approximate Net Weight:
45 lbs.
C
ER
TEM
D
YS
S
S
Maximum Width 24 1/16" [611mm]
NOTE: See configurations for more detailed information.
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
120-277V/50 & 60hz, 347V/60hz,
480V/60hz
-30°C Minimum Temperature
40°C Ambient Temperature Rating
TIFIE
AVU101787
2013-01-28 08:56:14
EM M E P IC M OD ER N M ED I U M L ED
POWER A ND LUM ENS B Y B AR C O U N T
Number of
LightBARs
DISTRIBUTION
Power
[Watts]
Current @
120V [A]
Current @
277V [A]
T2
T3
C01
27
0.23
0.13
1,873
1,866
1,817
1,836
1,756
1,807
1,937
1,907
1,911
1,847
1,704
C02
54
0.46
0.21
3,716
3,701
3,605
3,642
3,485
3,585
3,843
3,783
3,792
3,665
3,380
C03
77
0.65
0.29
5,475
5,453
5,311
5,366
5,134
5,282
5,661
5,573
5,586
5,399
4,980
C04
101
0.86
0.37
7,282
7,253
7,064
7,137
6,829
7,026
7,530
7,413
7,430
7,181
6,624
B01
27
0.23
0.13
2,304
2,295
2,235
2,258
2,160
2,223
2,382
2,345
2,351
2,272
2,096
B02
51
0.43
0.20
4,571
4,553
4,434
4,480
4,286
4,410
4,726
4,653
4,664
4,508
4,158
B03
73
0.62
0.28
6,734
6,707
6,533
6,600
6,315
6,497
6,963
6,855
6,871
6,641
6,125
B04
95
0.81
0.35
8,957
8,921
8,689
8,779
8,399
8,642
9,262
9,118
9,139
8,833
8,148
T4
SL2
SL3
SL4
5MQ
5WQ
5XQ
RW
SLR/
SLL
7 LED LIGHTBAR
21 LED LIGHTBAR
L UME N MUL T IP L IE R
Ambient
Temperature
10°C
15°C
25°C
40°C
Lumen
Multiplier
1.04
1.03
1.00
0.96
PR ODUCT C ONFIGUR A TIO N S
HOUSING
MID SECTION
SHADE
Solid
3.4" H x 9.9" W
Modern
9.3" H x 8.8" W
Straight Narrow
6.6" H x 19.1" W
MOUNTING OPTION
Height from
ceiling equals
calculated height
of fixture plus
pendant length
and 7/8"
Window
3.4" H x 9.9" W
Louvered
3.4" H x 9.9" W
Straight Wide
5.1" H x 23.9" W
Slot
3.4" H x 9.9" W
Bell
8" H x 24" W
Solid Rings
3.4" H x 12" W
Flute
6" H x 22.5" W
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
AVU101787
2013-01-28 08:56:14
2013-02-27 17:02:41
EM M E P IC M OD ER N M ED I U M L ED
ORDERING INFORMATION
Sample Number: EMM-B04-LED-E1-T2-FL-BK-2L
Product Family 1, 2
EMM=Epic Modern Medium
Number of 3, 4
Lightbars
B01=[1] 21 LED LightBAR
B02=[2] 21 LED LightBARs
Distribution
T2=Type II
Mid Section Type
SO=Solid
T3=Type III
T4=Type IV
WN=Window
LV=Louvered
AP=Grey
BZ=Bronze
5MQ=Type V Square Medium
5WQ=Type V Square Wide
ST=Slot
SR=Solid Rings
WH=White
DP=Dark Platinum
5XQ=Type V Square Extra
Wide
B03=[3] 21 LED LightBARs
B04=[4] 21 LED LightBARs
RW=Rectangular Wide
SL2=Type II w/Spill Control
C01=[1] 7 LED LightBARs
C02=[2] 7 LED LightBARs
SL3=Type III w/Spill Control
SL4=Type IV w/Spill Control
C03=[3] 7 LED LightBARs
C04=[4] 7 LED LightBARs
Lamp Type
LED=Solid State Light
Emitting Diodes
Shade Type
SN=Straight Narrow
SW=Straight Wide
BL=Bell
FL=Flute
5
Finish 6
BK=Black
Accessories 12
VA6101-XX=Bishop Wall Mount Arm
VA6102-XX=Bishop Wall Mount Arm w/
Cross Rod
VA6103-XX=Traditional Wall Mount Arm
VA6104-XX=Traditional Wall Mount Arm w/
45° Strap
GM=Graphite Metallic
VA6105-XX=Bishop Single Pole Mount Arm
Options
2L=Two Circuits7
VA6107-XX=Bishop Twin Pole Mount Arm
VA6106-XX=Bishop Single Pole Mount Arm
w/ Cross Rod
LCF=LightBAR Cover Plate Matches
Housing Finish
SLL=90 Degree Spill Light
Eliminator Left
7060=70 CRI/6000K CCT8
8030=80 CRI/3000K CC8
SLR=90 Degree Spill Light
Eliminator Right
MS-LXX=Motion Sensor for on/off 9
operation
MS/X-LXX=Motion Sensor for
bi-level switching
Voltage
E1=Electronic (120-277V)
VA6109-XX=Traditional Single Pole Mount
Arm
VA6110-XX=Traditional Single Pole Mount
Arm w/ Rounded Upper Bar
10
PM48=Pendant Mount 48" Length 11
or Specify Pendant Length
Inches (XX)
347=347V
480=480V
VA6108-XX=Bishop Twin Pole Mount Arm
w/ Cross Rods
VA6111-XX=Traditional Single Pole 16
Mount Arm w/ Rounded
Lower Bar
VA6112-XX=Traditional Single Pole Mount
Arm w/ 45 Degree Upper Bar
VA6113-XX=Traditional Single Pole 16
Mount Arm w/ 45 Degree
Lower Bar
VA6114-XX=Traditional Single Pole Mount
Arm w/ 45 Degree Upper Strap
VA6116-XX=Traditional Twin Pole Mount
Arm
VA6117-XX=Traditional Twin Pole Mount
Arm w/ Rounded Upper Bars
VA6118-XX=Traditional Twin Pole Mount 16
Arm w/ Rounded Lower
Bars
VA6119-XX=Traditional Twin Pole Mount
Arm w/ 45 Degree Upper Bars
VA6120-XX=Traditional Twin Pole Mount 16
Arm w/ 45 Degree Lower
Bars
VA6121-XX=Traditional Twin Pole Mount
Arm w/ 45 Degree Upper
Straps
VA6122-XX=EMMMast Arm Adapter
OA/RA1016=NEMA Photocontrol - Multi-Tap
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
Accessory Options
13
V=Victorian Finial14
M=Modern Finial14
A=Architectural Finial14
N=Nostalgic Finial14
R=NEMA Twistlock Photocell Receptacle15
Notes: 1
DesignLights™Consortium Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details.
2
Arm not included. Order seperately. See accessories.
3
Standard 4000 K CCT and greater than 70 CRI.
4
21 LED LightBAR powered at 350mA, 7 LED LightBAR powered at 1A.
5
Midsection not illuminated during operation.
6
Custom and RAL color matching available upon request. Consult your customer service representative for further information.
7
Low-level output varies by bar count. Consult factory. Requires quantity two or more LightBARS.
8
Consult customer service for lead times and lumen multiplier.
9
Sensor mounted to the luminaire. Available in B01 - B06 and C01 - C06 configurations. Replace XX with mounting height in feet for proper lens selection, (i.e., MS-L25). Consult factory for additional information.
10
Sensor mounted to luminaire. Available in B02 - B06 and C02 - C06 configurations. Replace X with number of bars operating in low output mode and replace XX with mounting height in feet for proper lens
selection, (i.e., MS/3-L25). Maximum 4 bars in low output mode. Consult factory for additional information.
11
PM option must be used with INVUE Pendant Kit only. Includes 48" long pendant pipe, swivel hanger and canopy cover. Other pendant lengths can be specified in inches (XX). Minimum pendant length is 9.5". For
lengths avobe 48", consult Invue Lighting Systems representative.
12
Order separately, replace XX with color suffix.
13
Add as suffix to accessory. Example: VA6109-BK-R.
14
Only available with Traditional arms.
15
Not available with finials, pendant mount (PM48) or bishop wall mounts.
16
Requires use of 4" O.D. round straight pole.
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
AVU101787
2013-01-28 08:56:14
2013-02-27 17:02:41
McGRAW-EDISON ®
D es c r iption
The TopTier™ Parking Garage and Canopy Luminaire is an innovative
solution that delivers an unparalleled combination of performance
and visual comfort. The patented WaveStream™ optical technology
blocks the line of sight from the LED light sources to the observer, while
extracting the maximum amount of light on task. This approach results in
a high level of uniformity and vertical footcandles that enhances safety in
the application environment. The TopTier luminaire is UL/cUL listed for
wet locations, IP66 and 3G vibration rated.
Type
Catalog #
Project
Date
Comments
Prepared by
Spe c ific a tion F ea t u r e s
Offered standard in 4000K (+/275K) CCT, optional 3000K and
6000K. Minimum 70 CRI.
C on s t r u c t i o n
One-piece, low copper die-cast
aluminum housing provides a
clean and symmetric housing.
Formed aluminum top is sloped
to prevent bird nesting. Metal
electrical tray allows for easy
electrical access for field servicing.
El e c tri c a l
Optics
Unique optical distributions are
accomplished using various
combinations of reflective backing
plates and WaveStream optical
technology. The optical Waveguide
is manufactured using precision
injection molded acrylic with
MicroLens® optics. The MicroLens
optics contain microscopic
inclusions that form a repeatable
and redundant pattern to direct
light in a precisely prescribed
distribution. For the ultimate level
of glare control and visual comfort,
specify the SG option which adds
a Solite® glass lens that works in
combination with the Waveguide
lens and reflective backing plate.
LED driver(s) are mounted to
metal electrical tray for optimal
thermal performance. 120-277V
50/60Hz, 347V 60Hz or 480V 60Hz
operation. For 0-10V dimming
driver(s), specify the DIM option.
Shipped standard with Cooper
Lighting proprietary circuit module
designed to withstand 10kV of
transient line surge. Greater than
85% lumen maintenance expected
at 60,000 hours, based off LM-80
test data and TM-21. Suitable for
ambient temperature applications
from -40°C (-40°F) to 40°C (104°F).
For 50°C (122°F) applications,
specify the HA high ambient
option. IP66 rated against the
ingress of dust and water.
Mo u n ting
Standard fixture mounts to a
square or octagonal 4" surface or
recessed j-box via heavy-gauge
quick mount bracket. With the
addition of a field supplied wet
location j-box, the luminaire can
be pendant mounted to a rigid or
free swinging pendant. Optional
mounting methods include
trunnion mount and wall mount.
Fin ish
Housing finished in white Super
durable TGIC polyester powder
coat paint, 2.5 mil nominal
thickness for superior protection
against fade and wear. Optional
colors include black, bronze,
grey, dark platinum and graphite
metallic. RAL and custom color
matches available. Consult the
McGraw-Edison Architectural
Colors brochure for the complete
selection.
TT TopTier LED
Solid State LED
Parking Garage and Canopy
Luminaire
Warran ty
Five-year warranty.
D imens ions
SURFACE OR PENDANT MOUNT
TRUNNION MOUNT
WALL MOUNT
9-1/4"
[236mm]
Adjustable to
14"
[356mm]
4-7/16"
[106mm]
4-7/8"
[123mm]
4-7/16"
[106mm]
18-3/8" [466mm]
18-3/8" [466mm]
18-3/8" [466mm]
4"
[101mm]
22-9/16" [574mm]
Certification Data
UL/cUL Wet Location Listed
3G Vibration Rated
LM79 / LM80 Compliant
IP66 Rated
ARRA Compliant
DesignLights Consortium® Qualified*
ISO 9001
7-3/16"
[183mm]
5-1/2"
[140mm]
Energy Data
5-13/16"
[149mm]
Shipping Data
Approximate Net Weight:
16 lbs. (7.2 kgs.)
TEM
D
ER
C
*www.designlights.org
YS
S
S
7-7/16"
[188mm]
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
120-277V/50 & 60Hz, 347V/60Hz,
480V/60Hz
-40°C Min. Temperature
40°C Max. Temperature
50°C Max. Temperature (HA Option)
TIFIE
ADH131097
2013-11-21 16:40:23
T T Top Tier L ED
Power a nd Lum ens
Lumen Package
L ume n Ma int e na nce
A1
Power (Wattage)
A2
A3
A4
A5
34
45
50
77
108
Current @ 120V (A)
0.29
0.34
0.43
0.65
0.91
Current @ 277V (A)
0.14
0.18
0.20
0.30
0.40
Ambient
Temperature
TM-21 Lumen Maintenance
(60,000 Hours)
Theoretical L70
(Hours)
40°C
85%
165,000
NOTE: Nominal data for A2 lumen package.
Optics
CQ
MQ
WQ
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
3,434
4,393
5,189
7,301
8,930
B1-U0-G1
B2-U0-G1
B2-U0-G1
B2-U0-G1
B3-U0-G1
3,552
4,544
5,368
7,553
9,238
B2-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G3
3,421
4,377
5,170
7,274
8,897
B2-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G3
B3-U0-G3
NOTE: Nominal data at 4000K CCT. For configurations at other color temperatures or for configurations that
include glass or occupancy sensor options refer to the specific IES files for lumen output data.
Order ing I nfor m a tion
Sample Number: TT-A2-LED-E1-WQ-AP
Product Family
Lumen Package 1
Lamp Type
Voltage
Distribution
Mounting
Color
TT=TopTier
A1=Nominal 3,000
Lumens
A2=Nominal 4,000
Lumens
A3=Nominal 5,000
Lumens
A4=Nominal 7,000
Lumens
A5=Nominal 9,000
Lumens
LED=Solid State Light
Emitting Diodes
E1=Electrical (120-277V)
347=347V
480=480V
CQ=Concentrated
MQ=Medium
WQ=Wide
[BLANK]=Surface or Pendant Mount
TMB=Trunnion Mount with
Connection Box
WM=Wall Mount
[BLANK]=White
AP=Grey
BZ=Bronze
BK=Black
DP=Dark Platinum
GM=Graphite Metallic
Options (Add as Suffix)
Accessories (Order Separately)
7060=70 CRI 6000K
8030=80 CRI 3000K
HA=50°C High Ambient 1
CG=Clear Glass 2
SG=Solite® Glass 3
TR=Tamper Resistant Hardware
X=Driver Surge Protection Only
DIM=0-10V Dimming Drivers
ICP=Integral Cold Weather Battery Pack (Specify 120V or 277V) 4, 5
DOS=Dimming Occupancy Sensor
DIMRF-LW=LumaWatt Wireless Sensor, Wide Lens (8' - 16' Mounting) 6
DIMRF-LN=LumaWatt Wireless Sensor, Narrow Lens (16' - 40' Mounting) 6
FSIR-100=Wireless Configuration Tool for Occupancy Sensor
MA1252=10kV Circuit Module Replacement
NOTES:
1. The A4 and A5 lumen packages are not available with the HA high ambient option.
2. CG clear glass option only available with MQ and WQ distributions.
3. SG (Solite® glass) – Included as standard with the CQ distribution. Only available with WQ distribution.
4. The ICP option is not available with dimming (DIM, DOS, DIMRF-LN or DIMRF-LW) or the HA high ambient option.
5. The ICP option is only available in 120V or 277V, must specify voltage. 25°C maximum ambient temperature.
6. DIMRF-LN and DIMRF-LW are not available in 347 or 480V.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH131097
2013-11-21 16:40:23
McGRAW-EDISON ®
D ES C R IPTION
The IMPACT Elite family of cutoff wall luminaires is the ideal complement
to site design. Incorporating modular LightBAR™ technology, Impact
Elite provides outstanding uniformity and energy-conscious illumination.
Combined with a rugged construction, the Impact Elite is the ideal facade
and security luminaire for zones surrounding schools, office complexes,
apartments, and recreational facilities. UL/cUL listed for wet locations.
Type
Catalog #
Project
Date
Comments
Prepared by
SP EC IFIC A TION FEA T U R E S
C on s t r u c t i o n
Heavy-wall, die-cast aluminum
housing and removable hinged
door frame for precise tolerance
control and repeatability. Hinged
door inset for clean mating with
housing surface and secured via
two (2) captive fasteners. Optional
tamper resistant Torx™- head
fasteners offer vandal resistant
access to the electrical chamber.
Optics
Choice of six (6) high efficiency,
patented AccuLED Optics™
manufactured from injection
molded acrylic. Optics are
precisely designed to shape the
distribution maximizing efficiency
and application spacing. BL
optics offer backlight control to
decrease wall brightness while
the optional uplight glow provides
soft illumination to highlight
architectural surfaces. Offered
standard in 4000°K
(+/- 275K) CCT and nominal 70 CRI.
El e c tri c a l
LED drivers mount to die-cast
aluminum back casting for optimal
heat sinking and operation
efficiency. Impact Elite Wall Series
LED operates from
120-277V 50/60Hz, 347V 60Hz or
480V 60Hz. Shipped standard with
Cooper Lighting proprietary circuit
module designed to withstand
10kV of transient line surge. 90%
lumen maintenance expected at
60,000 hours. The Impact Elite Wall
Series LED luminaire is suitable for
operation in -40°C to 40°C ambient
environments. LightBARS™ feature
an IP66 enclosure rating. Optional
occupancy sensor with backbox is
available.
mounting attachment fits directly
to 4" J-box or wall with the Impact
Elite "Hook-N-Lock" mechanism for
quick installation. Secured with two
(2) captive corrosion resistant black
oxide coated allen head set screws
concealed but accessible from
bottom of fixture.
Fin ish
Cast components finished in a 5
stage super durable TGIC polyester
powder coat paint, 2.5 mil nominal
thickness for superior protection
against fade and wear. Standard
colors include black, bronze, grey,
white, dark platinum, and graphite
metallic. RAL and custom color
matches available. Consult the
McGraw-Edison Architectural
Colors brochure for the complete
selection.
Mounti ng
Warran ty
Gasketed and zinc plated rigid steel
Five-year warranty.
IST
IMPACT ELITE LED
TRAPEZOID
1 - 2 LightBARs
Solid State LED
WALL MOUNT LUMINAIRE
H OOK- N- L OCK MOUNT ING
S TA ND A R D D IM ENSI O N S
Trapezoid
7"
[178mm]
16-1/2" [419mm]
9" [229mm]
S TA ND A R D D IM ENSI O N S W I T H B AC K B O X
CERTIFICATION DATA
UL/cUL Listed
LM79 / LM80 Compliant
IP66 LightBARS
ARRA Compliant
ISO 9001
DLC Qualified
12-1/4"
[311mm]
2-1/3"
[58mm]
1-3/4"
[44mm]
ENERGY DATA
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
120-277V/50 & 60Hz, 347V/60Hz,
480V/60Hz
-40°C Minimum Temperature
40°C Ambient Temperature Rating
SHIPPING DATA
Approximate Net Weight:
18 lbs. (8 kgs.)
C
ER
TEM
S
YS
D
16-1/2"
[420mm]
S
7"
[180mm]
TIFIE
ADH100154
2013-06-13 16:24:09
I S T IM P A CT E LIT E L ED TR A PEZO I D
POWER A ND LUM ENS B Y B AR C O U N T
Number of
LightBARs
L UME N MUL T IP L IE R
DISTRIBUTION
Power
[Watts]
Current @
120V [A]
Current @
277V [A]
BL2
BL3
BL4
GZW
SLR/
SLL
7 LED LIGHTBAR
C01
27
0.23
0.13
C02
54
0.46
0.21
1,770
1,625
1,720
1,725
1,571
3,540
3,249
3,440
3,450
3,142
21 LED LIGHTBAR
B01
27
0.23
0.13
2,177
1,998
2,115
2,122
1,932
B02
51
0.43
0.20
4,354
3,996
4,231
4,244
3,865
Ambient
Temperature
Lumen
Multiplier
10°C
1.04
15°C
1.03
25°C
1.00
40°C
0.96
L UME N MA INT E NA NCE
Ambient
Temperature
TM-21 Lumen
Maintenance
(60,000 Hours)
Theoretical L70
(Hours)
25°C
> 94%
> 350,000
40°C
> 93%
> 250,000
ORDERING INFORMATION
Sample Number: IST-B02-LED-E1-BL3-GM
Product Family 1
IST=Impact Elite Small
Trapezoid
Number of 2, 3
LightBARs
B01=[1] 21 LED LightBAR
B02=[2] 21 LED LightBARs
C01=[1] 7 LED LightBAR
C02=[2] 7 LED LightBARs
Notes: 1
DesignLights™Consortium Qualified. Refer to
www.designlights.org Qualified Products List
under Family Models for details.
2
Standard 4000K CCT and nominal 70CRI.
3
21 LED LightBAR powered at 350mA, 7 LED
LightBAR powered at 1A.
4
Add as suffix.
5
Must specify voltage.
6
Only available in 2 bar (B02 or C02) configurations.
7
Consult Factory for lead times and lumen
multiplier.
8
Provides 10% uplight in 2 bar (B02 or C02)
configurations and 20% uplight in 1 bar (B01 or
C01) configurations.
9
Only available in 2 BAR (B02 or C02)
configurations; streetside LightBAR will be wired to
sensor. Time delay factory setting is 15 minutes.
10
Not available with OSB.
11
Specify 120 or 277V, (0°C) minimum temperature.
12
Consult factory for availability.
13
Specify 120 or 277V, (-20°C) minimum temperature.
14
Order separately.
15
Specify finish (color) in place of "XX".
Lamp Type
LED=Solid State Light
Emitting Diodes
Distribution
GZW=Wall Grazer Wide
Voltage
E1=Electronic 120-277V
BL3=Type III w/ Back Light
Control
347=347V
480=480V
BL4=Type IV w/ Back
Light Control
BL2=Type II w/ Back Light
Control
SLL=90 Degree Spill Light
Eliminator Left
SLR=90 Degree Spill Light
Eliminator Right
Finish
AP=Grey
BZ=Bronze
BK=Black
DP=Dark Platinum
GM=Graphite Metallic
WH=White
Options 4
P=Button Type Photocontrol (120V, 5
208, 240, or 277V)
2L=Two Circuits6
TR=Tamper Resistant Fasteners
7060=70 CRI/6000K CCT7
8030=80 CRI/3000K CCT7
ULG=Uplight Glow8
LCF=LightBAR Cover Plate Matches
Housing Finish
9
OSB=Occupancy sensor standard
with back box matching housing
finish.
BBB=Emergency LED power 10, 11, 12
pack (UL924 listed) 0°
C/32° F standard with
back box matching
housing finish.
10, 13
CWB=Emergency LED cold
temperature power pack
(UL924 listed) -20° C/-4° F
standard with back box
matching housing finish.
Accessories 14
MA1254-XX=Thruway Back Box - Impact Elite Trapezoid15
MA1253=10kV Circuit Module Replacement
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
ADH100154
2013-06-13 16:24:09
2013-06-13 16:06:19
Project:
Type:
Ordering # :
Comments:
ARCHITECTURAL OUTDOOR
FEATURES
GUARDIAN W FRN LED
• Extruded Aluminum Housing w/ Antique Copper Polyester
Powder Coat Finish
• Die Cast Aluminum Fascia & End Caps w/ Antique Copper Polyester
Powder Coat Finish
• High Impact White Acrylic Diffuser (50% DR Acrylic)
• Steel Reflector w/ Hi-Reflectance White Powder Coat Finish
• Recessed Steel Screws
• Thermal Compensation Technology Ensures Longer LED Lifetime,
Which is Ideal For Fixtures Being Placed in Area With Fluctuating
or Higher Ambient Temperatures
• Fixture Mounts Directly to Surface w/ Two Wall Anchors
(Not Included)
• One 20W Driver Per Four 4.2W LED Strips
• 100V - 277V
• Surge Protector
• CSA Listed Wet Location
ORDERING INFORMATION
Example : (GRDW - FRN - L33.6 - 100 - 277V - WAL - AC - 51K)
Antique Copper is Standard Finish
GRDW - FRN
PRODUCT
Guardian W
FRN 16 1/2”
SOURCE/WATTAGE
VOLTAGE
DIFFUSER
FINISH
L33.6 - (8) 4.2W LED Strips
(Available in 3000K & 5100K)
100V - 277V
4.2W LED Strips (LM80 Standard)
**40,000 Hours(L70)
Please See
“Options” Column
For Driver
Specifications
WAL - White Acrylic Lens
(Standard)
FRL - Frosted Acrylic Lens
SM - Matte Silver
TB - Textured Black
AC - Antique Copper
AS - Antique Silver
BT - Bronze Mist
CP - Copper
SN - Sand
SW - Swedish Steel
BZ - Textured Bronze
TW - Textured White
Please See “Options”
Column For Specifications
RAL Colors or
Custom Match Consult Factory
R E P L A C E M E N T PA R T S
PA R T N O .
16” White Acrylic Diffuser
16” Frosted White Acrylic Diffuser
3024960
3024962
OPTIONS
Eight 4.2W LED Strips
30K - 3000K Color Temp.
3 Nichia NS3x183 Series LEDs Per Strip
- SW30Bin, Color Temp = 3000K Nominal
- Constant Voltage at 12 Volts by Driver
- 80 CRI typ. (75 CRI min) 2000 Lumens
- 39W Input = Estimated 51 Lumens Per Watt
Eight 4.2W LED Strips
51K - 5100K Color Temp.
3 Nichia NS3x183 Series LEDs Per Strip
- SW51Bin, Color Temp = 5100K Nominal
- Constant Voltage at 12 Volts by Driver
- 80 CRI typ. (75 CRI min) 2160 Lumens
- 39W Input = Estimated 55 Lumens Per Watt
NOTES
**Definition of 40,000 hours: Lifetime Rating is Based on Lamp Manufacturers’
LM80 Test Results Which Utilized an Exponentially Decaying Model, a
Standard Used by The Department of Energy, as Well as by Other
Manufacturers.
We reserve the right to revise the design or components of any product due
to parts availability or change in UL standards, without assuming any
obligation or liability to modify any products previously manufactured, and
without notice.
33 Donald Drive Fairfield, OH 45014
ph:(513)858-6004
fax:(513)858-6038
email:sales@teronlight.com
web:teronlight.com
THE EDGE® PWY-EDG-2M
Pathway Luminaire – Type II Medium
Product Description
Duable die-cast aluminum luminaire housing mounts directly to 4" (102mm) diameter
pole without visible mounting hardware for clean apperance. Pole mounts to rugged
die cast aluminum internal flange secured by (3) 3/8-16 anchor bolts (provided). Note:
T45 Torx 3/8 socket required for head installation. Top mounted LEDs for superior
optical performance and light control.
Performance Summary
Utilizes BetaLED® Technology
Patented NanoOptic® Product Technology
Made in the U.S.A. of U.S. and imported parts
CRI: Minimum 70 CRI
10.0"
[ 254mm ]
CCT: 5700K (+/- 500K) Standard, 4000K (+/- 300K)
7.0"
[ 177mm ]
Warranty: 10 years on luminaire/10 years on Colorfast DeltaGuard® finish†
EPA and Weight: Reference EPA and Weight spec sheet
Accessories
“A”
Field Installed Accessories
XA-XBP8RSV
XA-XBP8BK
XA-XBP8RWH
XA-XBP8RBZ
XA-XBP8RPB
ø 4.0"
[ 102mm ]
Retro-Fit Kit
- Used for replacement of existing bollards
Ordering Information
Example: PWY-EDG-2M-P0-02-D-UL-SV-350-OPTIONS
2M
02
D
Product
Optic
Mounting
LED
Count
(x9)
Version
Voltage
PWY-EDG
2M
Type II
Medium
P0
13"
(330mm)
landscape
P1
18"
(457mm)
landscape
P3
3' (0.9m)
landscape
P4
42"
(1068mm)
landscape
P8
8' (2.4m)
landscape
02
D
UL
Universal
120–277V
UH*
Universal
347–480V
12
120V
24
240V
27
347V
34*
347V
48*
480V
PWY-EDG
Color
Options
Drive
Current
SV
Silver
(Standard)
BK
Black
BZ
Bronze
PB
Platinum
Bronze
WH
White
350
350mA
525**
525mA
F (262) 504-5415
Landscape-18
18" [457mm]
Pathway
36" [914mm]
Pathway
42" [1067mm]
Pedestrian
96" [2438mm]
40K 4000K Color Temperature
- Color temperature per luminaire
F Fuse
- When code dictates fusing, use time delay fuse
- Not available with all ML options. Refer to ML spec
sheet for availability with ML options
HL Hi / Low (175/350/525 Dual Circuit Input)
- Refer to ML spec sheet for details
- Sensor not included
TL Two-Level (175/525 w/ integrated sensor control)
- Refer to ML spec sheet for details
TL2 Two-Level (0/350 w/ integrated sensor control)
- Refer to ML spec sheet for details
TL3 Two-Level (0/525 w/ integrated sensor control)
- Refer to ML spec sheet for details
WB Welded Base
- Standard on P8 mounting option, available with
P1, P3, and P4 mounting options
Rev. Date 11/09/2012
T (800) 236-6800
Dim. “A”
13" [330mm]
Options
* Available with P3, P4 and P8 mounting options.
** Available with P1, P3, P4 and P8 mounting options.
† See www.cree.com/lighting for warranty terms.
www.cree.com/lighting
Model
Landscape-13
Pathway Luminaire – Type II Medium
Product Specifications
Photometry
All published luminaire photometric testing performed to IESNA LM-79-08
standards by Independent Testing Laboratories, a NVLAP certified laboratory.
CONSTRUCTION & MATERIALS
• Durable die-cast aluminum luminaire housing mounts directly to 4"
(102mm) diameter pole without visavle mounting hardware for clean
apperance
150˚
1105
25' 20'
150˚
15' 10'
5'
0'
5'
20'
• Pole mounts to rugged die cast aluminum internal flange secured by (3)
3/8-16 anchor bolts (provided)
120˚
120˚
553
10' 15'
20' 25'
3.0
10'
276
• Top mounted LEDs for superior optical performance and light control
1.5
.1 .3 .5 1 2 5
0'
90˚
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer
with an ultradurable powder topcoat, providing excellent resistance to
corrosion, ultraviolet degradation and abrasion. Standard is silver. Bronze,
black, white, and platinum bronze are also available
90˚
5'
0m
CURB LINE
1.5
3.0
10'
4.6
15'
60˚
ELECTRICAL SYSTEM
60˚
30˚
• Power Factor: > 0.9 at full load
20'
7.6 6.1
• Total Harmonic Distortion: < 20% at full load
6.1
4.6 3.0 1.5
0m 1.5
3.0 4.6 6.1
PWY-EDG-2M-**-02-D-UL-350
Mounting Height: 3' (0.9m) A.F.G.
Initial Delivered Lumens: 1,407
Initial FC at grade
• Integral 10kV surge suppression protection standard
• To address inrush current, slow blow fuse or type C/D breaker should be
used
REGULATORY & VOLUNTARY QUALIFICATIONS
• cULus Listed
• Suitable for wet locations
• Luminaire also available with CE listing
• 10kV surge suppression protection tested in accordance with IEEE/ANSI
C62.41.2
• Luminaire and finish endurance tested to withstand 5,000 hours of
elevated ambient salt fog conditions as defined in ASTM Standard B 117
• ENERGY STAR Qualified LED Lighting
• Dark Sky Friendly, IDA Approved
• RoHS Compliant
• Meets Buy American requirements within ARRA
IES Files
To obtain an IES file specific to your project consult:
http://www.cree.com/lighting/tools-and-support/exterior-ies-configuration-tool
Lumen Output, Electrical, and Lumen Maintenance Data
Type II Medium Distribution
18
18
4000K
Initial
Delivered
Lumens
BUG
Ratings*
Per TM-15-11
Initial
Delivered
Lumens
Per TM-15-11
1,407
B1 U1 G1
1,297
B1 U1 G1
1,970
B1 U1 G1
1,816
BUG
Ratings*
System
Watts
120–480V
TOTAL CURRENT
120V
208V
350mA @ 25˚C (77˚F)
22
0.18
0.12
525mA @ 25˚C (77˚F)
B1 U1 G1
34
0.29
0.19
240V
277V
System
Watts
347–480V**
0.10
0.10
28
0.17
0.15
TOTAL CURRENT
© 2012 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes
only. See www.cree.com/patents for patents that cover these products. Cree®, the Cree logo, THE
EDGE®, BetaLED®, NanoOptic®, and Colorfast DeltaGuard® are registered trademarks, and the
BetaLED Technology logo is a trademark of Cree, Inc. or one of its subsidiaries.
www.cree.com/lighting
T (800) 236-6800
F (262) 504-5415
50K Hours Projected
Lumen Maintenance Factor
@ 15˚C (59˚F)***
347V
480V
0.09
0.13
91%
0.13
89%
40
For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit www.iesna.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf
Utilizes magnetic step-down transformer when 525mA drive current or multi-level options are selected
***
Projected L70 (10K) Hours: >60,000. For recommended lumen maintenance factor data see TD-13
*
**
0.12
7.6
Position of vertical plane
of maximum candlepower.
Candlepower Trace: Vertical plane through
horizontal angle of maximum candlepower.
ITL Test Report #: 71500
PWY-EDG-2M-**-02-D-UL-350
Initial Delivered Lumens: 1,432
• Input Voltage: 120–277V or 347–480V, 50/60Hz, Class 1 drivers
5700K
4.6
5'
• Note: T45 Torx 3/8 socket required for head installation
LED
Count
(x10)
6.1
75˚
15'
829