DR2MH™
T-6 Metal Halide • Remote Ballast (RS)
PROJECT:
TYPE:
CATALOG NUMBER:
SOURCE:
NOTES:
CATALOG NUMBER LOGIC
DR2MH
T635
RD
Example- DR2MH - T635 -
RS
Configure Ballast Housing Separately
-
81
- BCM -
Ballast Housing Required
2
REMOTE BALLAST HOUSINGS:
HP2RM - HP2 Remote Housing
PM2RM - Universal Power Module 2 Remote
RM - Remote Wall Mount
Material
Blank-Aluminum
B- Brass
S-Stainless Steel
Faceplate
DR2MH - Drive Star™ (T-6 Metal Halide)
OptiLock®
T635 - T-6 Metal Halide (35W)
Housing
RS - Remote Shallow Housing (Requires Remote Ballast)
Lamp Type
0 - By Others
81 - (35W) Metal Halide T-6/830
Finish
Aluminum & Brass Faceplates
Premium Finish
Brass Faceplates
Powder Coat Color
Satin
Wrinkle
Machined
MAC
Bronze
BZP
BZW
Polished
POL
MitiqueTM
MIT
Black
BLP
BLW
White (Gloss)
WHP
WHW
Aluminum
SAP
—
Verde
—
VER
Stainless Faceplates
Machined
MAC
Polished
POL
BRU
Brushed
Interior use only.
ABP Antique Brass Powder
CMG Cascade Mountain Granite
RMG Rocky Mountain Granite
AMG Aleutian Mountain Granite
CRI
SDS Sonoran Desert Sandstone
AQW Antique White
CRMCream
SMG Sierra Mountain Granite
BCM Black Chrome
HUG Hunter Green
TXF
BGEBeige
MDS Mojave Desert Sandstone
WCP Weathered Copper
BPP Brown Patina Powder
NBP Natural Brass Powder
WIR Weathered Iron
CAP Clear Anodized Powder
OCP Old Copper
Cracked Ice
Textured Forest
Also available in RAL Finishes
See submittal SUB-1439-00
Optical Openings
1-Single
2 - 2 at 180°
4 - 4 at 90°
LAMP DATA
BK No.
81
Lamp Watts
35
Description
35T6/MH/830
B-K LIGHTING
Rated Life
12,000
Initial Lumens
3,300
Mean Lumens
2,600
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
CRI
81
SUBMITTAL DATE
05-28-14
CCT(K)
3,000
DRAWING NUMBER
SUB-1369-00
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
DR2MH™
T-6 Metal Halide • Remote Ballast (RS)
PROJECT:
TYPE:
SIDE VIEW
2 3/8"
(60mm)
7" Dia.
(178mm)
7" Dia.
(178mm)
FACEPLATE
1 1/2"
(38mm)
1 1/2"
(38mm)
7" Dia.
(178mm)
2 3/8"
(60mm)
1 1/2"
(38mm)
5 3/4"
(146mm)
2 3/8"
(60mm)
5 3/4"
(146mm)
5 3/4"
(146mm)
5 3/4" Dia
(146mm)
5 3/4" Dia
(146mm)
5 3/4" Dia
(146mm) 1 7/16"
(37mm)
BOTTOM VIEW
1 7/16"
(37mm)
1 7/16"
(37mm)
3/16"
(5mm)
1 3/4"
(44mm)
3/16"
(5mm)
3/16"
(5mm)
1 3/4"
(44mm)
1 3/4"
(44mm)
WARNING
This product is intended for use ONLY in areas of restricted depth.
The shallow housing does not permit separation between the wiring
and lamp compartments.
Designer should detail the following warning in all specification
documents:
MANDATORY: Installer MUST use water-tight fittings and ensure a
sealed conduit/wiring system or this fixture will leak. Failure to do so
will VOID WARRANTY.
All dimensions indicated on this submittal are nominal.
Contact Technical Sales if you require more stringent specifications.
SPECIFICATIONS
GreenSource Initiative™
Metal and packaging components are made from recycled materials.
Manufactured using renewable solar energy, produced onsite.
Returnable to manufacturer at end of life to ensure cradle-to-cradle
handling. Packaging contains no chlorofluorocarbons (CFC’s). Use
of this product may qualify for GreenSource efficacy and recycling
rebate(s). Consult www.bklighting.com/greensource for program
requirements.
Fixture Housing
Corrosion-free composite, made from high strength, thermo-formed,
sheet molded polyester compound. Glass reinforced, flame retardant
and UV stabilized. (2) Bottom-Entry, 3/4" NPT female conduit entries
with knockout plugs and (4) side flats for 1/2" or 3/4" conduit adapters.
Optics
Fixed position bracket ensures a highly efficient, direct component
contribution by the lamp to the lens. 360° stainless steel cutoff shield
provides field adjustable brightness control.
Socket
Specification grade ceramic body lamp holder rated for 5kV starting
pulse. G12 bi-pin base, nickel-plated contacts and stainless steel, heat
resistant lamp retaining clips.
Faceplate
Solid, 2-3/8" machined 6061T6 aluminum with (4) black oxide, captive,
stainless steel mounting screws. Faceplate options include solid, 2-3/8"
machined brass and solid, 2-3/8" machined stainless steel.
Installation
For direct burial in soil or concrete. Consult Drainage Installation
Guide for In-Grade Fixtures (DIG-IT) for compliance with proper soil
preparation and drainage requirements prior to installation.
Finish
StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free
process cleans and conversion coats aluminum components prior
to application of Class ‘A’ TGIC polyester powder coating. Brass
components are available in powder coat or handcrafted metal finish.
Stainless steel components are available in handcrafted metal finish.
(Brushed finish for interior use only).
Remote Ballast
For use with remote metal halide ballast. See ballast technical data to
determine lamp-to-ballast distance and wiring requirements prior to
detailing field installation of any remote wiring.
Wiring / Connectors
Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to
UL1659 standard.
Lens
High heat, shock resistant, 1/8" Pyrex® vertical prism glass lens. Suitable
for walk-over and drive-over applications to 35,000 lbs.
B-K LIGHTING
Listings
ETL Listed to ANSI/UL Standard 1598 and Certified to CAN/CSA Standard
C22.2 No. 250. IP68 Rated. Made in the USA.
®Teflon is a registered trademark of DuPont Corporation
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
05-28-14
DRAWING NUMBER
SUB-1369-00
Precision2® and its features are covered in whole or in part by U.S. Patent Nos. 7,033,038; 6,254,258 B1; 7,249,867 B2; 7,370,988 B2; 7,553,042; 7,560,148; and 7,699,489.
HP2RM™ Remote Ballast
In-Grade
PROJECT:
7" Dia
TYPE:
CATALOG NUMBER:
7 1/4" Dia
1"
SOURCE:
NOTES:
2 1/8"
REMOTE WIRING
CATALOG NUMBER LOGIC
Remote ballast installations require
inter-connected wiring between the
lamp and ballast (By Others) and have
specific wiring requirements between
these components. Ballast manufacturers
regularly recommend the following wiring
details for such installations.
HP2RM
Example-
HP2RM
-
H70M
-
BLP
-
120
-
GM-R
Material
Blank-Aluminum
B- Brass
S-Stainless Steel
Remote Ballast Housing
Electronic Ballast
HP2RM - Remote In-Grade (Flush)
• 1 Foot Minimum and 15 Foot
Maximum Remote Wire Length
(Ballast to Lamp Socket).
BallastHP2-RM-H35E
Type
Metal Halide
H35M - (35W) Magnetic
H50M - (50W) Magnetic
H70M - (70W) Magnetic
H100M - (100W) Magnetic
H150M
H35E
H50E
H70E
-
-
-
-
H100E - (100W) Electronic
H150E - (150W) Electronic*
(150W) Magnetic
(35W) Electronic
(50W) Electronic
(70W) Electronic
Finish
Aluminum & Brass Faceplates
* H150E Available in 120 VAC or 277 VAC only.
Satin
Wrinkle
Bronze
BZP
BZW
Black
BLP
BLW
White (Gloss)
WHP
WHW
Aluminum
SAP
—
Verde
—
VER
Machined
MAC
Polished
POL
MitiqueTM
MIT
Stainless Faceplates
Machined
MAC
Polished
POL
BRU
Brushed
Interior use only.
Also available in RAL Finishes
See submittal SUB-1439-00
Input Voltage
120 - 120 Volt
277 - 277 Volt
MT - 120/208/240/277 Volt Multi Tap*
ABP Antique Brass Powder
HUG Hunter Green
AMG Aleutian Mountain Granite
MDS Mojave Desert Sandstone
AQW Antique White
NBP Natural Brass Powder
BCM Black Chrome
OCP Old Copper
BGEBeige
RMG Rocky Mountain Granite
BPP Brown Patina Powder
SDS Sonoran Desert Sandstone
CAP Clear Anodized Powder
SMG Sierra Mountain Granite
CMG Cascade Mountain Granite
TXF
CRI
WCP Weathered Copper
Cracked Ice
CRMCream
*Electronic Ballast Only
• Each pair of dedicated lamp leads
must be 18 gauge, wire type SF-2
or SFF-2.
Premium Finish
Brass Faceplates
Powder Coat Color
• Each pair of dedicated lamp
leads must be run in a separate,
dedicated metal conduit.
• Lamp leads must be placed in a
minimum 1/2” internal diameter
conduit, pipe, or flexible conduit.
• The use of metal clad cable
assemblies or service power cords
(SJ, SO, etc.) is prohibited.
Magnetic Ballast
• 35 Watt = 15 Foot Minimum and
50 Foot Maximum Remote Wire
Length (Ballast to Lamp Socket).
• >35 Watt = 1 Foot Minimum and
50 Foot Maximum Remote Wire
Length (Ballast to Lamp Socket).
Textured Forest
Please consult the factory through your
local B-K Lighting Sales Representative
prior to finalizing any installation detail
utilizing remote ballast wiring.
WIR Weathered Iron
Option
Failure to comply with specific
wiring requirements will void
product warranty.
GM-R - Round Grout Mask
GM-S - Square Grout Mask
BALLAST ELECTRICAL DATA
BALLAST
TYPE
INPUT
VOLTS
INPUT
WATTS
INPUT
CURRENT
CIRCUIT
TYPE
MINIMUM START
TEMPERATURE
REMOTE BALLAST
WIRE LENGTH
H35M
Magnetic
120
53
1.10
HX-HPF
-20° F
15’ Min - 50’ Max.
H35M
Magnetic
277
56
0.40
HX-HPF
-20° F
15’ Min - 50’ Max.
H50M
Magnetic
120
72
1.00
HX-HPF
-20° F
1’ Min - 50’ Max.
H50M
Magnetic
277
72
0.50
HX-HPF
-20° F
1’ Min - 50’ Max.
H70M
Magnetic
120
90
1.90
HX-HPF
-20° F
1’ Min - 50’ Max.
H70M
Magnetic
277
90
0.80
HX-HPF
-20° F
1’ Min - 50’ Max.
H100M
Magnetic
120
129
1.50
HX-HPF
-22° F
1’ Min - 50’ Max.
H100M
Magnetic
277
118
0.35
HX-HPF
-22° F
1’ Min - 50’ Max.
H150M
Magnetic
120
185
1.90
HX-HPF
-22° F
1’ Min - 50’ Max.
H150M
Magnetic
277
173
0.75
HX-HPF
-22° F
1’ Min - 50’ Max.
H35E*
Electronic
120
44
0.39
HPF
-5° F
1’ Min - 15’ Max.
H35E*
Electronic
277
44
0.17
HPF
-5° F
1’ Min - 15’ Max.
H50E*
Electronic
120
58
0.49
HPF
-5° F
1’ Min - 15’ Max.
H50E*
Electronic
277
58
0.21
HPF
-5° F
1’ Min - 15’ Max.
H70E*
Electronic
120
79
0.67
HPF
-5° F
1’ Min - 15’ Max.
H70E*
Electronic
277
79
0.29
HPF
-5° F
1’ Min - 15’ Max.
H100E*
Electronic
120
110
0.90
HPF
-5° F
1’ Min - 15’ Max.
H100E*
Electronic
277
110
0.41
HPF
-5° F
1’ Min - 15’ Max.
H150E*
Electronic
120
167
1.40
HPF
-22° F
1’ Min - 15’ Max.
Electronic
277
167
0.61
HPF
-22° F
1’ Min - 15’ Max.
H150E*
*Ballast Manufacture’s requirement: Wire used must only be 18 gauge, SF2 or SFF2, and be in a dedicated metal conduit of 1/2” I.D. Minimum, per lamp.
B-K LIGHTING
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
5-28-14
DRAWING NUMBER
SUB-1797-00
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
HP2RM™ Remote Ballast
In-Grade
PROJECT:
7" Dia
(178mm)
7" Dia
TYPE:
7 1/4" Dia
SIDE VIEW
TOP VIEW
1"
7" Dia
(178mm)
7 1/4" Dia
(184mm)
2 1/8"
7 1/2" Dia
(190mm)
1"
(25mm)
7 1/4"
DiaDia
7 1/2"
(184mm)
(190mm)
7 1/4" Dia
10"
Dia
(184mm)
(254mm)
HP2-RM-H35E
14 1/2"
(368mm)
1"
14
1/2"
(25mm)
(368mm)
Grade
3/8"
(9mm)
1/
(3m
Patented
Stability
Flange
7 1/4" Dia
(184mm)
BOTTOM VIEW
14 1/2"
(368mm)
Patented
Hydro-Lock™
Barrier Plate
Assembly
(ACV™)
10" Dia
(254mm)
2 1/8"
(54mm)
2 1/8"
(54mm)
Patented
Stability
Flange
4" Dia
(102mm)
4" Dia
(102mm)
Patented
Hydro-Lock™
Barrier Plate
Assembly
(ACV™)
2 1/8"
(54mm)
4" Dia
(102mm)
HP2-RM-H35E
CO2-R
SPECIFICATIONS
All dimensions indicated on this submittal are nominal.
Contact Technical Sales if you require more stringent specifications.
GreenSource Initiative™
Metal and packaging components are made from recycled materials.
Manufactured using renewable solar energy, produced onsite.
Returnable to manufacturer at end of life to ensure cradle-to-cradle
handling. Packaging contains no chlorofluorocarbons (CFC’s). Use
of this product may qualify for GreenSource efficacy and recycling
rebate(s). Consult www.bklighting.com/greensource for program
requirements.
Installation
Integral, copper-free aluminum concrete pour collar (CPC), furnished
in Black finish, permits for direct burial installation in soil or concrete.
Consult Drainage Installation Guide for In-Grade Fixtures (DIG-IT) for
compliance with proper soil preparation and drainage requirements
prior to installation. For use with remote metal halide fixture (specified
separately). Suitable for walk-over and drive-over applications to 35,000
lbs.
Materials
Water Management
IP-68 rated, vacuum sealed enclosure. Patented Anti-Condensation
Valve (ACV™) eliminates condensation from ballast chamber. High
temperature silicone ‘O’ Ring at faceplate. Patented HydroLock®
technology provides fail safe water barrier between junction box and
interior components. Anti-siphon valve (ASV™) prevents “wicking”
through conductor insulation.
Furnished in Copper-Free Aluminum (Type 6061-T6), Brass (Type 360) or
Stainless Steel (Type 304).
Faceplate
Solid, 1/2” machined faceplate with (5) black oxided, captive, stainless
steel mounting screws. Faceplate installs flush to grade.
Housing
Corrosion-free composite, made from high strength, thermo-formed,
sheet molded polyester compound. Glass reinforced, flame retardant
and UV stabilized. (2) Bottom-Entry, 3/4” NPT female conduit entries
with knockout plugs and (4) side flats for 1/2” or 3/4” conduit adapters.
Stability Flange
Patented, corrosion-free composite flange projects into installation
sub-strate to reinforce housing stability. Integral REBAR saddles simplify
installation onto concrete form. (4) Orthogonal bosses permit use of 1/2”
PVC conduit or EMT to simplify vertical position and leveling of housing.
Pre-set self-tapping screws anchor housing at proper elevation.
Magnetic Ballast
Class H insulated, integral, high power factor, magnetic ballast. 120V or
277V primary voltage, 60Hz. Integral, removable gear tray with quick
disconnect and carrying handle.
Electronic Ballast
High power factor, integral, electronic ballast.
Multi-Tap
(120/208/240/277V) primary voltage 50/60Hz. H150E available in 120V,
or 277V primary voltage. 50/60Hz. Integral, removable gear tray with
quick disconnect and carrying handle.
B-K LIGHTING
Wiring / Connectors
Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659
standard. Gear tray quick disconnects. Patented HydroLock® with
anti-siphon valve (ASV™) wireway. (5) Water-tight connectors supplied
for branch circuit and lamp connection. Maximum (2) #10 & (1) #18.
Minimum (1) #12 & (1) #18 per connector.
Finish
StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free
process cleans and conversion coats aluminum components prior
to application of Class ‘A’ TGIC polyester powder coating. Brass
components are available in powder coat or handcrafted metal finish.
Stainless steel components are available in handcrafted metal finish.
(Brushed finish for interior use only).
Warranty
5 year limited warranty.
Listings
ETL Listed to ANSI/UL Standard 1598 and Certified to CAN/CSA Standard
C22.2 No. 250. IP-68 Rated. RoHs compliant. Made in USA.
®Teflon is a registered trademark of DuPont Corporation.
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
5-28-14
DRAWING NUMBER
SUB-1797-00
Precision2® and its features are covered in whole or in part by U.S. Patent Nos. 7,033,038; 6,254,258 B1; 7,249,867 B2; 7,370,988 B2; 7,553,042; 7,560,148; and 7,699,489
HP2-R
PM2RM SURFACE MOUNT
Metal Halide
PROJECT:
TYPE:
CATALOG NUMBER:
SOURCE:
NOTES:
CATALOG NUMBER LOGIC
PM2RM
Example
SM
REMOTE WIRING
H35E
Electronic Ballast
PM2RM- SM - H35E - BZP - MT
Remote ballast installations require inter-connected
wiring between the lamp and ballast (by others).
Electronic ballasts have specific wiring requirements
between these components. Ballast manufacturers
regularly recommend the following wiring details for
such installations:
Series
PM2RM - Universal Power Module™ 2 Remote
Mounting
• 1 Foot Minimum and 15 Foot Maximum
Remote Wire Length (Ballast to Lamp
Socket).
SM - Surface Mount (requires side conduit entry)
• Each pair of dedicated lamp leads must be run
in a separate, dedicated metal conduit.
Ballast Type
H35E - 35W Electronic Metal Halide Ballast
• Lamp leads must be 18 gauge, wire type SF-2
or SFF-2.
Finish
Standard Finish
Premium Finish
Powder Coat Color
Satin
Wrinkle
ABP
Bronze
BZP
BZW
AMG Aleutian Mountain Granite
Antique Brass Powder
MDS Mojave Desert Sandstone
NBP
Natural Brass Powder
Old Copper
Black
BLP
BLW
AQW Antique White
OCP
White (Gloss)
WHP
WHW
BCM Black Chrome
RMG Rocky Mountain Granite
Aluminum
SAP
—
BGEBeige
SDS
Verde
—
VER
BPP
Brown Patina Powder
SMG Sierra Mountain Granite
CAP
Clear Anodized Powder
TXF
CMG Cascade Mountain Granite
WCP Weathered Copper
CRI
WIR
CRMCream
HUG Hunter Green
Cracked Ice
Sonoran Desert Sandstone
• Each pair of dedicated lamp leads must be
placed in a minimum 1/2” internal diameter
conduit, pipe, or flexible conduit.
• The use of metal clad cable assemblies or
service power cords (SJ, SO, etc.) is prohibited.
Please consult the factory through your local B-K
Lighting Sales Representative prior to finalizing any
installation detail utilizing remote ballast wiring.
Failure to comply with specific wiring
requirements will void product warranty.
Textured Forest
Weathered Iron
Also available in RAL Finishes
See submittal SUB-1439-00
Input Voltage
MT - 120/208/240/277 Volt Multi Tap (Electronic Ballast)
BALLAST ELECTRICAL DATA
BALLAST
TYPE
INPUT
VOLTS
INPUT
WATTS
INPUT
CURRENT
CIRCUIT
TYPE
MINIMUM START
TEMPERATURE
REMOTE BALLAST
WIRE LENGTH
H35E
Electronic
120
44
0.39
HPF
-5° F
1’ Min - 15’ Max.
H35E
Electronic
277
44
0.17
HPF
-5° F
1’ Min - 15’ Max.
Ballast Manufacture’s requirement: Wire used must only be 18 gauge, SF2 or SFF2, and be in a dedicated metal conduit of 1/2” I.D. Minimum, per lamp.
B-K LIGHTING
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
6-10-14
DRAWING NUMBER
SUB-1524-00
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
PM2RM SURFACE MOUNT
Metal Halide
PROJECT:
TYPE:
TOP VIEW
SIDE VIEW
1/4"
2 1/4"
22 1/4"
3/4"
1 3/4"
11 3/4"
O.C.O.C.
O.C.
(4) Clearance
Clearance
Holes
(4) Clearance
Holes
(4)
Holes
for 1/4"
1/4"
Fasteners
for 1/4"
Fasteners
for
Fasteners
(by (by
others)
others)
(by
others)
5/8"
8 5/8"
88 5/8"
O.C.O.C.
O.C.
1/8"
9 1/8"
99 1/8"
3/4"
7 3/4"
77 3/4"
7/8"
3 7/8"
33 7/8"
3/8"
3 3/8"
33 3/8"
END VIEW
3/8"
2 3/8"
22 3/8"
With
Supplied
With
Supplied
With
Supplied
Mounting
Bracket
Mounting
Bracket
Mounting
Bracket
(4) Patented
Patented
1/2"1/2"
Knockouts
(4) Patented
Knockouts
(4)
1/2"
Knockouts
ForFor
UseUse
withwith
Surface
Surface
For
Use
with
Surface
Conduit
(By (By
Others)
Conduit
Others)
Conduit
(By
Others)
All dimensions indicated on this submittal are nominal.
Contact Technical Sales if you require more stringent specifications.
SPECIFICATIONS
GreenSource Initiative™
Metal and packaging components are made from recycled
materials. Manufactured using renewable solar energy, produced
onsite. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons
(CFC’s). Use of this product may qualify for GreenSource efficacy
and recycling rebate(s). Consult www.bklighting.com/greensource
for program requirements.
Housing
Copper free, aluminum extrusion with die cast end caps. Surface
mounted with flow through back channel to prevent water and
debris collection. Machined aluminum cover with countersunk
holes for flush hardware installation. Tamper-resistant, captive,
black oxide stainless steel mounting screws. Front access for ease
of installation and inspection. [2] 1/2” NPT female conduit entries
per end cap for through wiring.
Ballast
[1] 35 watt, integral, high power factor, electronic metal halide
ballast. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz.
Installation
Universal design for remote metal halide fixture (specified
separately) Water-tight installation in three distinct mounting
conditions.
Installation Tether
Stainless steel cable with integral loop allows cover to temporarily
suspend from housing during installation to simplify wire
connection and component attachment.
Warranty
5 year limited warranty.
Surface Mount
For use with side entry, surface conduits. Stainless steel mounting
brackets provide for direct anchor to architectural surfaces in any
orientation.
Patented Knockouts
[4] 1/2” NPT, machined aluminum knockouts. High temperature,
silicone ‘O’ Ring for water-tight seal. Patented design allows
knockout to be reinserted without compromising seal integrity.
B-K LIGHTING
UPM’s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2
Finish
StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free
process cleans and conversion coats aluminum components prior
to application of Class ‘A’ TGIC polyester powder coating.
Listings
NEMA 4X / IP-66 Rated Enclosure. ETL Listed to ANSI/UL Standard
50/50E and Certified to CAN/CSA Standard C22.2 No. 94.1/94.2.
RoHs compliant. Made in USA.
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
6-10-14
DRAWING NUMBER
SUB-1524-00
PM2RM JUNCTION BOX (CAMLOCK™)
Metal Halide
PROJECT:
TYPE:
CATALOG NUMBER:
SOURCE:
NOTES:
CATALOG NUMBER LOGIC
PM2RM
Example
REMOTE WIRING
H35E
PM2RM- CT - H35E - BZP - MT -
Electronic Ballast
MB
Remote ballast installations require inter-connected
wiring between the lamp and ballast (by others).
Electronic ballasts have specific wiring requirements
between these components. Ballast manufacturers
regularly recommend the following wiring details for
such installations:
Series
PM2RM - Universal Power Module™ 2 Remote
Mounting
• 1 Foot Minimum and 15 Foot Maximum
Remote Wire Length (Ballast to Lamp
Socket).
CT - Rectangular CamLock™
CR - Round CamLock™
• Each pair of dedicated lamp leads must be run
in a separate, dedicated metal conduit.
Ballast Type
H35E - 35W Electronic Metal Halide Ballast
• Lamp leads must be 18 gauge, wire type SF-2
or SFF-2.
Finish
Standard Finish
Premium Finish
Powder Coat Color
Satin
Wrinkle
ABP
Bronze
BZP
BZW
AMG Aleutian Mountain Granite
Antique Brass Powder
MDS Mojave Desert Sandstone
NBP
Natural Brass Powder
Old Copper
Black
BLP
BLW
AQW Antique White
OCP
White (Gloss)
WHP
WHW
BCM Black Chrome
RMG Rocky Mountain Granite
Aluminum
SAP
—
BGEBeige
SDS
Verde
—
VER
BPP
Brown Patina Powder
SMG Sierra Mountain Granite
CAP
Clear Anodized Powder
TXF
CMG Cascade Mountain Granite
WCP Weathered Copper
CRI
WIR
CRMCream
HUG Hunter Green
Cracked Ice
Sonoran Desert Sandstone
• Each pair of dedicated lamp leads must be
placed in a minimum 1/2” internal diameter
conduit, pipe, or flexible conduit.
• The use of metal clad cable assemblies or
service power cords (SJ, SO, etc.) is prohibited.
Please consult the factory through your local B-K
Lighting Sales Representative prior to finalizing any
installation detail utilizing remote ballast wiring.
Failure to comply with specific wiring
requirements will void product warranty.
Textured Forest
Weathered Iron
Also available in RAL Finishes
See submittal SUB-1439-00
Input Voltage
MT - 120/208/240/277 Volt Multi Tap (Electronic Ballast)
Options
MB - Mounting Brackets
BALLAST ELECTRICAL DATA
BALLAST
TYPE
INPUT
VOLTS
INPUT
WATTS
INPUT
CURRENT
CIRCUIT
TYPE
MINIMUM START
TEMPERATURE
REMOTE BALLAST
WIRE LENGTH
H35E
Electronic
120
44
0.39
HPF
-5° F
1’ Min - 15’ Max.
H35E
Electronic
277
44
0.17
HPF
-5° F
1’ Min - 15’ Max.
Ballast Manufacture’s requirement: Wire used must only be 18 gauge, SF2 or SFF2, and be in a dedicated metal conduit of 1/2” I.D. Minimum, per lamp.
B-K LIGHTING
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
6-10-14
DRAWING NUMBER
SUB-1523-00
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
PM2RM JUNCTION BOX (CAMLOCK™)
Metal Halide
PROJECT:
TYPE:
FRONT VIEW
7 3/4"
7 3/4"
SIDE VIEW
7 3/4"
3 7/8"
3 3/8"
3 3/8"
3 7/8"
3 7/8"
3 1/4"
(83mm)
5"
O.C.
(127mm)
3 3/8"
Round CamLock™ Canopy
END VIEW
2 1/2"
2 1/2"
With Supplied
2 1/2"With Supplied
Mounting Plate With Supplied
Mounting Plate
Mounting Plate
3"
(76mm)
1/8"
(3mm)
1/8"
(3mm)
2 1/2"
2 1/2"
With Supplied
2 1/2"With Supplied
(4) Patented 1/2" Knockouts
(4) Patented 1/2" Knockouts
Mounting CanopyWith Supplied
Mounting Canopy
For Use with Surface
For Use
Surface
(4) Patented
1/2"with
Knockouts
Mounting Canopy
Conduit (By Others)
Conduit
(By Others)
For Use with
Surface
Conduit (By Others)
RECTANGULAR CamLock™ Canopy
1/8"
(3mm)
3"
(76mm)
(4) 1/2" Knockouts
(4) 1/2" Knockouts
For use with Surface
For use with Surface
(4) 1/2" Knockouts
Conduit (By Others)
Conduit
(By3 1/4"
Others)
For use with
Surface
(83mm)
Conduit (By Others)
5"
O.C.
(127mm)
5" Dia.
(127mm)
1/8"
(3mm)
All dimensions indicated on this submittal are nominal.
Contact Technical Sales if you require more stringent specifications.
SPECIFICATIONS
GreenSource Initiative™
Metal and packaging components are made from recycled
materials. Manufactured using renewable solar energy, produced
onsite. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons
(CFC’s). Use of this product may qualify for GreenSource efficacy
and recycling rebate(s). Consult www.bklighting.com/greensource
for program requirements.
Installation
Universal design for remote metal halide fixture (specified
separately) Water-tight installation in three distinct mounting
conditions.
Round CamLock™ Canopy
(Recessed Junction Box)
5” diameter, machined aluminum construction. Includes stainless
steel universal mounting ring for use with 4” octagonal junction
box. [2] tamper-resistant, black oxide stainless steel mounting
screws. 1/8” thick HT-805A silicone foam gasket for water-tight
seal. Integral CamLock™ provides additional 30° adjustment for
precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM
and junction box. Optional stainless steel mounting brackets may
be specified to provide additional anchor to architectural surface.
Rectangular CamLock™ Canopy
(Recessed Junction Box)
Machined aluminum, 3” x 5” rectangular canopy for use with
single gang junction box. [2] tamper resistant, black oxide stainless
steel mounting screws. 1/8” thick HT-805A silicone foam gasket
for water-tight seal. Integral CamLock™ provides additional
30° adjustment for precision alignment of UPM regardless of
junction box orientation. Integral wiper seal maintains water-tight
integrity between UPM and junction box. Optional stainless steel
mounting brackets may be specified to provide additional anchor
to architectural surface.
Housing
Copper free, aluminum extrusion with die cast end caps. Surface
mounted with flow through back channel to prevent water and
debris collection. Machined aluminum cover with countersunk
holes for flush hardware installation. Tamper-resistant, captive,
black oxide stainless steel mounting screws. Front access for ease
of installation and inspection. [2] 1/2” NPT female conduit entries
per end cap for through wiring.
Installation Tether
Stainless steel cable with integral loop allows cover to temporarily
suspend from housing during installation to simplify wire
connection and component attachment.
B-K LIGHTING
UPM’s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2
Patented Knockouts
[4] 1/2” NPT, machined aluminum knockouts. High temperature,
silicone ‘O’ Ring for water-tight seal. Patented design allows
knockout to be reinserted without compromising seal integrity.
Ballast
5" Dia.
(127mm)
[1] 35 watt, integral, high power factor, electronic
metal halide
ballast. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz.
Finish
StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free
process cleans and conversion coats aluminum components prior
to application of Class ‘A’ TGIC polyester powder coating.
Warranty
5 year limited warranty.
Listings
NEMA 4X / IP-66 Rated Enclosure. ETL Listed to ANSI/UL Standard
50/50E and Certified to CAN/CSA Standard C22.2 No. 94.1/94.2.
RoHs compliant. Made in USA.
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
6-10-14
DRAWING NUMBER
SUB-1523­-00
3 3/8"
Remote Ballast Housing
Surface Mount
PROJECT:
SURFACE MOUNT REMOTE BOX
TYPE:
SUB-1799
CATALOG NUMBER:
SOURCE:
NOTES:
CATALOG NUMBER LOGIC
REMOTE WIRING
RM
Example
RM
-
H35E
-
MT
-
SAP
Remote ballast installations require inter-connected wiring
between the lamp and ballast (by others) and have specific
wiring requirements between these components. Ballast
manufacturers regularly recommend the following wiring
details for such installations.
Remote Ballast Housing
RM - Remote Wall Mount
Ballast Type
Electronic Ballast
Metal Halide
H35M - (35W) Magnetic
H50M - (50W) Magnetic
H70M - (70W) Magnetic
H100M - (100W) Magnetic
H150M
H35E
H50E
H70E
-
-
-
-
(150W) Magnetic
(35W) Electronic
(50W) Electronic
(70W) Electronic
High Pressure Sodium
H100E - (100W) Electronic S35M - (35W) Magnetic**
H150E - (150W) Electronic* S50M - (35W) Magnetic
S70M - (70W) Magnetic
• Each pair of dedicated lamp leads must be run in
a separate, dedicated metal conduit.
• Lamp leads must be 18 gauge, wire type SF-2 or
SFF-2.
* H150E Available in 120 VAC or 277 VAC only. ** S35M Available in 120 VAC Only.
Input Voltage
• Each pair of dedicated lamp leads must be placed
in a minimum 1/2” internal diameter conduit,
pipe, or flexible conduit.
120 - 120 Volt
277 - 277 Volt
MT - 120/208/240/277 Volt Multi Tap
• 1 Foot Minimum and 15 Foot Maximum Remote
Wire Length (Ballast to Lamp Socket).
• The use of metal clad cable assemblies or service
power cords (SJ, SO, etc.) is prohibited.
Electronic Ballast Only. * H150E available in 120 VAC or 277 VAC only
Finish
Standard Finish
Magnetic Ballast
Premium Finish
Powder Coat Color
Satin
Wrinkle
ABP
CMG Cascade Mountain Granite RMG Rocky Mountain Granite
Bronze
BZP
BZW
Black
BLP
BLW
AMG Aleutian Mountain Granite
CRI
SDS
AQW Antique White
CRMCream
SMG Sierra Mountain Granite
White (Gloss)
WHP
WHW
Aluminum
SAP
—
BCM Black Chrome
HUG Hunter Green
TXF
BGEBeige
MDS Mojave Desert Sandstone
WCP Weathered Copper
Verde
—
VER
BPP
Brown Patina Powder
NBP
Natural Brass Powder
WIR
CAP
Clear Anodized Powder
OCP
Old Copper
Antique Brass Powder
Cracked Ice
Sonoran Desert Sandstone
Textured Forest
Weathered Iron
Also available in RAL Finishes
See submittal SUB-1439-00
• 35 Watt = 15 Foot Minimum and 50 Foot Maximum
Remote Wire Length (Ballast to Lamp Socket).
• >35 Watt = 1 Foot Minimum and 50 Foot Maximum
Remote Wire Length (Ballast to Lamp Socket).
Please consult the factory through your local B-K Lighting
Sales Representative prior to finalizing any installation
detail utilizing remote ballast wiring.
Failure to comply with specific wiring
requirements will void product warranty.
BALLAST ELECTRICAL DATA
BALLAST
TYPE
INPUT
VOLTS
INPUT
WATTS
INPUT
CURRENT
CIRCUIT
TYPE
MINIMUM START
TEMPERATURE
REMOTE BALLAST
WIRE LENGTH
H35M
Magnetic
120
53
1.10
HX-HPF
-20° F
15’ Min - 50’ Max.
H35M
Magnetic
277
56
0.40
HX-HPF
-20° F
15’ Min - 50’ Max.
H50M
Magnetic
120
72
1.00
HX-HPF
-20° F
1’ Min - 50’ Max.
H50M
Magnetic
277
72
0.50
HX-HPF
-20° F
1’ Min - 50’ Max.
H70M
Magnetic
120
90
1.90
HX-HPF
-20° F
1’ Min - 50’ Max.
H70M
Magnetic
277
90
0.80
HX-HPF
-20° F
1’ Min - 50’ Max.
H100M
Magnetic
120
129
1.50
HX-HPF
-22° F
1’ Min - 50’ Max.
H100M
Magnetic
277
118
0.35
HX-HPF
-22° F
1’ Min - 50’ Max.
H150M
Magnetic
120
185
1.90
HX-HPF
-22° F
1’ Min - 50’ Max.
H150M
Magnetic
277
173
0.75
HX-HPF
-22° F
1’ Min - 50’ Max.
H35E*
Electronic
120
44
0.39
HPF
-5° F
1’ Min - 15’ Max.
H35E*
Electronic
277
44
0.17
HPF
-5° F
1’ Min - 15’ Max.
H50E*
Electronic
120
58
0.49
HPF
-5° F
1’ Min - 15’ Max.
H50E*
Electronic
277
58
0.21
HPF
-5° F
1’ Min - 15’ Max.
H70E*
Electronic
120
79
0.67
HPF
-5° F
1’ Min - 15’ Max.
H70E*
Electronic
277
79
0.29
HPF
-5° F
1’ Min - 15’ Max.
H100E*
Electronic
120
110
0.90
HPF
-5° F
1’ Min - 15’ Max.
H100E*
Electronic
277
110
0.41
HPF
-5° F
1’ Min - 15’ Max.
H150E*
Electronic
120
167
1.40
HPF
-22° F
1’ Min - 15’ Max.
Electronic
277
167
0.61
HPF
-22° F
1’ Min - 15’ Max.
H150E*
*Ballast Manufacture’s requirement: Wire used must only be 18 gauge, SF2 or SFF2, and be in a dedicated metal conduit of 1/2” I.D. Minimum, per lamp.
S35M
Magnetic
120
46
0.80
RX-HPF
-40° F
1’ Min - 15’ Max.
S50M
Magnetic
120
66
1.00
HX-HPF
-40° F
1’ Min - 35’ Max.
S50M
Magnetic
277
66
0.50
HX-HPF
-40° F
1’ Min - 35’ Max.
S70M
Magnetic
120
91
1.40
HX-HPF
-40° F
1’ Min - 35’ Max.
S70M
Magnetic
277
91
0.70
HX-HPF
-40° F
1’ Min - 35’ Max.
B-K LIGHTING
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
7-10-12
DRAWING NUMBER
SUB-1799-00
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
3 3/8"
Remote Ballast Housing
Surface Mount
PROJECT:
SURFACE MOUNT REMOTE BOX
TYPE:
SUB-1799
SIDE VIEW
BACK VIEW
5 1/2"
4"
6"
5 1/2"
3 3/4"
8"
4"
4"
6"
5 1/2"
6"
3 3/4"
8"
3 3/4"
8"
3 3/8"
END VIEW
3 3/8"
3 3/8"
SURFACE MOUNT REMOTE BOX
SUB-1799
All dimensions indicated on this submittal are nominal.
Contact Technical Sales if you require more stringent specifications.
SPECIFICATIONS
GreenSource Initiative™
Metal and packaging components are made from
recycled materials. Manufactured using renewable
solar energy, produced onsite.
Returnable
to manufacturer at end of life to ensure cradleto-cradle handling.
Packaging contains no
chlorofluorocarbons (CFC’s). Use of this product
may qualify for GreenSource efficacy and recycling
rebate(s). Consult www.bklighting.com/greensource
for program requirements.
Installation
Nema 3R, surface mount design. For use with remote
metal halide fixture (specified separately).
Housing
Steel construction with screw cover. Front access for
ease of installation and inspection. [2] bottom entry,
3/4” conduit knockouts.
SURFACE MOUNT REMOTE BOX
SUB-1799
Finish
Wiring / Connectors
Teflon® coated wire, 18 gauge, 600V, 250°C rated and StarGuard®, our exclusive RoHs compliant, 15 stage
certified to UL1659 standard. Pre-wired and labeled chromate-free process cleans and conversion coats
terminal strip. SURFACE MOUNT REMOTE BOX aluminum components prior to application of Class
‘A’ TGIC polyester powder coating.
Magnetic Ballast
SUB-1799
[1] 35-150 watt, Class H insulated, integral, high Warranty
power factor, magnetic ballast. 120V or 277V primary 5 year limited warranty.
voltage, 60Hz.
Listings
Electronic Ballast
NEMA 3R Enclosure. ETL Listed to ANSI/UL Standard
[1] 35-150 watt, integral, high power factor, electronic 50/50E and Certified to CAN/CSA Standard C22.2 No.
ballast. Multi-Tap (120/208/240/277V) primary 94.1/94.2. RoHs compliant. Made in USA.
voltage 50/60Hz. H150E available in 120V, or 277V
primary voltage. 50/60Hz.
B-K LIGHTING
®Teflon is a registered trademark of DuPont Corporation.
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
7-10-12
DRAWING NUMBER
SUB-1799-00