NavionTM
LED Roadway and Area Luminaire
Roadway Lighting Redefined
A New Performance Standard in
LED Roadway Lighting
With industry-leading, patented optics in a scalable package,
the NavionTM LED roadway luminaire delivers state-of-the-art
optical control, low maintenance costs, rugged construction
and modern styling. Designed with DOT, municipal and utility
customers in mind, the Navion luminaire’s superior performance
and configurability provide uniform, glare-free, energy-efficient
light for highways, streets and other public spaces.
1
Long Life with Low Maintenance Costs
Superior illumination, low maintenance, long life and low cost
of ownership are critical factors when lighting roads and public
spaces. Ideal for retrofit and new construction applications, the
Navion fixture can be tailored to meet your most important needs
without compromising on specification features. The five housing
configurations of the Navion luminaire allow scalability from 2,582
to 33,732 delivered lumens. The 4000K/70 CRI is standard,
with 6000K/70 CRI and 3000K/70 CRI options available. LED
components are IP66 rated and the fixture is wet location listed,
with an IP66 housing option available.
Customer-Focused Design
Designed to meet the full range of outdoor lighting challenges
in area, site and roadway applications, the Navion luminaire is
available with a wide array of optics and specification performance
features. A tool-less, removable power tray door and quick
electrical disconnects make installation and maintenance easy.
The 10kV common surge (line-to-ground) and differential surge
(line-to-line) protection is standard. Four-bolt mounting with
cast-in leveling steps ensures simple installation, while a super
TGIC polyester powder-coat finish provides years of worry-free
ownership.
2
Design Performance Features
Stepping Up to the Challenge
The Navion luminaire is designed to provide superior optical performance in a package that is easy to install and maintain. With HID
equivalents from 70W HPS up to 750W Pulse Start MH, along with the industry-leading AccuLED Optics system from Eaton’s Cooper
Lighting business, the Navion fixture is designed to meet the toughest lighting challenges.
TM
Construction
Finish
• Tool-less entry with hinged, removable power door for easy
maintenance
• 3G vibration rated
• IP66-rated LED Light Squares
• Wet location-rated housing (IP66 housing optional)
• Extruded aluminum heat sink scaled to lumen package
• Rugged, die-cast aluminum housing
• Five-stage super TGIC paint resists extreme weather
conditions while providing optimal color and gloss retention.
It’s available in standard grey or optional bronze, black, dark
platinum, graphite metallic or white.
Grey
Bronze
Black
Dark Platinum
Graphite Metallic
White
Electrical
• Operates in -40°C to 40°C ambient temperatures
(optional 50°C high ambient configuration)
• 10kV common surge (line-to-ground) and differential surge
(line-to-line) protector
• >L90, 60,000 hours at 40°C, compliant with IESNA TM-21
• LED driver is mounted directly to removable door for optimal
heat sinking
• 120-277V 50/60Hz, 347V 60Hz or 480V 60Hz operation
• Quick disconnects for tool-less removal of power door
Warranty
• Five-year warranty
Controls
• Standard with 0-10V dimming driver(s)
• Optional occupancy sensor
• Optional wireless control and monitoring system
3
Tool-less Entry
Quick Disconnects
Bird Guard
Four-Bolt Mounting
Stainless steel latches provide
easy, tool-less access to
electrical compartment, even
with lineman’s gloves.
Connections between power
door and housing are made
with tool-less quick
disconnects. Power door
removes in seconds.
Standard bird guard fits
securely around 1-1/4" and
2" pipe (1-5/8" to 2-3/8" O.D.).
Sturdy four-bolt mounting
brackets fit 1-1/4" to 2" pipe
(1-5/8" to 2-3/8" O.D.).
It’s available with built-in level
indicator for a secure, level
installation.
............
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Extruded Aluminum Heat Sinks
......
. . . . . . . . .Tool-less Entry
.....
Scalable Lumen Package . . . .
Self-Cleaning Heat Sinks
Optional Features
NEMA Photocontrol
Receptacle
Gasketed receptacle for
mounting standard NEMA
photocontrol (order separately).
Surge Protection
Occupancy Sensor
IP66 Rating
A 10kV common surge
(line-to-ground) and differential
surge (line-to-line) mode
protection is standard.
The optional motion sensor
reduces energy use for site
lighting applications.
Housing is available with IP66
rating for dust and water.
4
Scalable Illumination with LED Light Squares
Energy Savings and Environmental Stewardship
The simplest and most effective way to reduce a lighting fixture’s impact on the environment
is to minimize its energy consumption. By incorporating Light Squares from Eaton’s Cooper
Lighting business, the Navion LED luminaire provides energy savings up to 75 percent
compared to standard HID solutions.
Lumen Maintenance
> 90%
Long Life
Hours of Operation
60,000
With a 60,000+ hour rated life (at greater than 90 percent lumen maintenance), the Navion
LED luminaire operates up to six times longer than traditional metal halide fixtures.
Low Maintenance
NOTE: Compliant with IESNA TM-21
With simple quick disconnects, the Light Squares are easily removed in the field for
replacement or for the rotation of the optics.
Warm White Color
Lighting designers, architects and specifying engineers have
long preferred light sources that provide a balanced spectral
power distribution and warm white light. Many LED
solutions standardize on a cool blue 5000-6000K correlated
color temperature (CCT) to maximize lumen output.
The Navion luminaire provides warm white light at a
standard 4000K CCT with no sacrifice in lumen output.
Superior Efficiency
and Control
With efficiencies as high as 95 percent,
the patented AccuLED Optics system
is up to 30 percent more efficient than
traditional HID optical systems.
Available in 16 optional distributions,
this system provides the flexibility and
performance required for outdoor
applications.
TM
House Side Shield
For stringent light trespass requirements
and the ultimate level of backlight control,
a house side shield accessory is available
for factory or field installation. Designed to
seamlessly integrate with the SL2, SL3,
SL4 and AFL distributions, the house side
shield virtually eliminates backlight and
also enhances visual comfort.
5
4000K
2700K
3000K
nominal
4500K
High Pressure Sodium Metal Halide (Quartz, Ceramic)
(2000K)
Light Squares
with AccuLED Optics
(4000K)
6500K
Cold LED
(6000-6500K)
Optical Performance Redefined
Performance and Scalability
The Navion luminaire is designed around superior optical performance and scalability. With a choice of 15 lumen packages and 16
optical distributions, the optimal configuration can be used to maximize light levels while minimizing operating costs.
Efficacy (lm/W)
Power Consumption (Watts)
Drive Current
Number of
Light Squares
530mA
700mA
1A
1
30
38
56
2
54
72
107
3
80
105
157
4
105
138
213
6
159
210
315
120
110
100
Lumens
Per Watt
(lm/W)
Lumens
Per Watt
(lm/W)
1A
700mA
530mA
Lumens
Per Watt
(lm/W)
Lower Initial Cost
Lower Operating Cost
NOTE: Nominal efficacy at 4000K CCT
Optical Distributions
The Navion luminaire has a choice of seven asymmetric area, three asymmetric roadway, three symmetric and three specialized
distributions.
Asymmetric Area Distributions
T2
(Type II)
SL2
(Type II with Spill Control)
T3
(Type III)
SL3
(Type II with Spill Control)
T4FT
(Type IV Forward Throw)
T2R
(Type II Roadway)
SL4
(Type IV with Spill Contro
Symmertric Distributions
Asymmetric Roadway Distributions
RW
(Rectangular Wide Type I)
T4W
(Type IV Wide)
T3R
(Type III Roadway)
5NQ
(Type V Square Narrow)
5MQ
(Type V Square Medium)
5WQ
(Type V Square Wide
Specialized Distributions
AFL
(Automotive Frontline)
SLL
(90° Spill Light Eliminator Left)
SLR
(90° Spill Light Eliminator Right)
6
Versatility and Simplicity
The Navion luminaire is designed to meet a wide range of
outdoor lighting needs, from single-fixture applications to
multi-lane highways. Utilities and municipalities will find it ideal
for streets, rural roads, bridges, substations and small area
security lighting applications. With multiple optical configurations
and fixture sizes, the Navion luminaire allows lumen and energy
output to be customized to fulfill the exact needs of the outdoor
space — eliminating wasted energy and obtrusive spill light.
The larger configurations excel in multi lane highway projects,
while the smaller lumen packages work well in substation areas
and along neighborhood streets.
Municipalities
For cities and towns, the Navion luminaire delivers superior
optical performance in a durable, modern design, while
providing up to 70 percent less energy usage compared to
typical HID luminaires. With greater than 90 percent lumen
maintenance at 60,000 hours (over 16 years at 10 hours daily
use), the Navion fixture offers a long life and maximum savings in
maintenance costs.
The Navion luminaire offers a choice of 10 optical packages to
meet the exact needs of the outdoor area, and the fixture’s size
and construction are scaled to the specific lumen package.
Designed to withstand harsh environments, the luminaire’s
rugged, die-cast aluminum construction and 2.5 mil
powder-coat finish provide superior protection. The Navion
luminaire is 3G vibration rated and comes standard with 10kV
dual-mode surge protection.
Performance and Versatility
The Navion luminaire is built around LED technology and designed to accommodate ongoing improvements in LED chips and drivers,
making it the ideal solution for both current and future lighting requirements.
7
Utilities
Departments of Transportation
For utility applications, the Navion LED luminaire provides
superior optical performance, reliability and low maintenance
costs. With greater than 90 percent lumen maintenance at
60,000 hours (over 16 years at 10 hours daily use), the Navion
luminaire’s long life saves on maintenance costs — no expensive
lamp replacement trips.
For local, state and federal Departments of Transportation, the
Navion luminaire leads the field in optical performance, versatility
and durability with uniform, warm white illumination, no uplight
and minimal glare.
Available in 10 optical packages, the Navion luminaire’s size and
construction are scaled to the lumen package, offering choices
to meet the exact needs of the application and keeping capital
expenditures low. The superior LED optics eliminate uplight while
delivering minimal glare. The sleek, modern design makes it an
ideal solution for numerous lighting needs.
With standard 10kV dual-mode surge protection, a 3G vibration
rating and testing performed at 40°C, versus the standard 25°C,
utilities and their customers are guaranteed a reliable product.
Fixture construction includes a durable, die-cast aluminum housing
with a 2.5 mil powder coat finish to provide long-lasting protection.
Available in five fixture sizes, each with a different lumen
package for ultimate versatility, the Navion luminaire has a long
rated life with greater than 90 percent lumen maintenance at
60,000 hours (over 16 years at 10 hours daily use).
The luminaire’s rugged, quality construction includes a die-cast
aluminum housing and a 2.5 mil power coat exterior finish to
withstand harsh conditions. A unique tool-less entry design
allows quick and easy installation and maintenance.
The Navion luminaire is suitable for -40°C to 40°C ambient
environments and features 10kV dual-mode surge protection,
a five-year warranty, IP66-rated LED panels and a 3G vibration
rating.
Ease of Installation and Maintenance
The Navion luminaire’s performance comes with years of low-cost, low-hassle ownership. With lumen maintenance and life expectancy
far beyond traditional HID light sources, regular and time-consuming service visits are a thing of the past. The simple and spacious
Navion fixture housing is designed to fit lineman’s gloves and can be installed with simple tools. Key electrical components are mounted
on the power door, so service is tool-less. The door is small enough to hold in one hand, making field replacement quick and easy.
Tool-less Access
Hinged, Removable Power Door
Stainless steel latches provide easy,
tool-less access to the electrical
compartment, even with lineman’s gloves.
Driver and surge protector is mounted to door. Power door hangs securely
and can be easily removed without the use of tools.
8
Occupancy Sensing
Accelerate Payback on your Investment
To further enhance energy savings, the Navion luminaire offers an optional occupancy sensor that is integral to each individual
luminaire. When the area surrounding the luminaire is unoccupied, the sensor has the ability to reduce light levels and power
consumption. In addition to financial benefits, all the control options for the Navion luminaire are designed to be simple and
cost-effective ASHRAE and Title 24 compliant solutions.
Dimming Occupancy Sensor (DOS)
When the DOS option is selected, the occupancy sensor is connected to a dimming driver and the entire luminaire dims when there
is no activity detected. When activity is detected, the luminaire returns to full light output. The sensor is factory preset to dim down
to approximately 50 percent lumen output with a time delay of five minutes. To change these settings, a FSIR-100 accessory can be
purchased. The FSIR-100 is a wireless configuration tool that allows the dimming level, time delay, sensitivity and other parameters
to be changed. Consult a representative from Eaton’s Cooper Lighting business for additional details.
LumaWatt Wireless Control and Monitoring System (DIMRF-LW and DIMRF-LN)
The LumaWatt system is best described as a peer-to-peer wireless network of luminaire-integral sensors that operate in accordance
with programmable profiles. The end user can create and manage sensor profiles with browser-based management software and
broadcast to the sensors as necessary via wireless gateways. Each sensor is capable of motion and photo sensing, metering power
consumption and wireless communication. For additional details, refer to www.cooperlighting.com.
Dimming Occupancy Sensor (DOS)
For mounting heights up to 20'
0
20
5
10
10
0
15
10
20
20
2"
[59mm]
0.78"
[20mm]
20
18
15
12
9
6
3
0
3
6
9
12 15 18 20
Coverage Side Area (Feet)
Coverage Top Area (Feet)
LumaWatt (DIMRF-LW and DIMRF-LN)
0
For mounting heights from 8' to 16'
20
15
10
5
0
5
10
15
16
0
24
8
18
0
8
For mounting heights from 16' to 40'
18
24
Coverage Side Area (Feet)
20
Coverage Top Area (Feet)
40
30
3-1/2" [89mm]
20
10
20
0
30
20
3/4"
[19mm]
10
2-3/16"
[56mm]
30
40
9
40
30
20
10
0
10
20
30
40
Coverage Side Area (Feet)
40
Coverage Top Area (Feet)
Ordering Information
Sample Number: NVN-AE-01-E-U-T3A-10K-4-AP
Product
Family
Number of
LED Squares 1
Light Engine
NVN=Navion
AE=1A Drive
Current
01=1
02=2
03=3
04=4
06=6
Surge
Protection
Driver
Voltage
Distribution
E=Non-Dimming
D=Dimming
U=Universal
120-277V
8=480V
9=347V
T2=Type II
T2R=Type II Roadway
T3=Type III
T3R=Type III Roadway
T4FT=Type IV Forward Throw
T4W=Type IV Wide
5NQ=Type V Square Narrow
5MQ=Type V Square Medium
5WQ=Type V Square Wide
SL2=Type II w/Spill Control
SL3=Type III w/Spill Control
SL4=Type IV w/Spill Control
SLL=90° Spill Light Eliminator Left
SLR=90° Spill Light Eliminator Right
RW=Rectangular Wide Type I
AFL=Automotive Frontline
10K=Cooper 10kV Surge
Module (Standard)
X=Driver Surge
Protection Only 2
Options (Add as Suffix)
2L=Two Circuits 3
7030=70 CRI 3000K 4
7060=70 CRI 6000K 4
530=Drive Current Factory Set to 530mA 5
700=Drive Current Factory Set to 700mA 5
4=NEMA Twistlock Photocontrol Receptacle
4N5=NEMA 5-PIN Twistlock Photocontrol Receptacle
4N7=NEMA 7-PIN Twistlock Photocontrol Receptacle
IP66=IP66 Rated
HA=50°C High Ambient
U=UL Listed/CSA Certified
L90=Optics Rotated 90° Left
R90=Optics Rotated 90° Right
MS/DIM-L08=Motion Sensor for Dimming Operation, Maximum 8' Mounting Height 6
MS/DIM-L20=Motion Sensor for Dimming Operation, 9' - 20' Mounting Height 6
MS/DIM-L40=Motion Sensor for Dimming Operation, 21' - 40' Mounting Height 6
MS/X-L08=Bi-Level Motion Sensor, Maximum 8' Mounting Height 7
MS/X-L20=Bi-Level Motion Sensor, 9' - 20' Mounting Height 7
MS/X-L40=Bi-Level Motion Sensor, 21' - 40' Mounting Height 7
K=Level Indicator
Color
Accessories (Order Separately)
AP=Grey (Standard)
BZ=Bronze
BK=Black
DP=Dark Platinum
GM=Graphite Metallic
WH=White
A=Raw Aluminum Finish
OA/RA1016=NEMA Photocontrol - Multi-Tap
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=NEMA Photocontrol - 120V
OA1223=10kV Surge Module Replacement
FSIR-100=Wireless Configuration Tool for Motion Sensor 10
LS/HSS=Field Installed House Side Shield 11
AI=Site Arm Included 8
LCF=Light Square Trim Plate Matches Housing Color
HSS=Factory Installed House Side Shield 9
NOTES: 1 Standard 4000K CCT and minimum 70 CRI. 2 Consult factory for driver surge protection values. 3 Low-level output varies by number of light squares specified. Consult factory. Requires two or more light squares. No terminal
block with 2L options. 4 Use dedicated IES files for 3000K and 6000K when performing layouts. These files are published on the Navion luminaire product page on the website. 5 1 Amp standard. Use dedicated IES files for 530mA
and 700mA when performing layouts. These files are published on the Navion luminaire product page on the website. 6 Sensor mounted externally. Must specify dimming driver. Consult factory for more information. 7 Sensor mounted
externally. Available in 2, 3, 4 or 6 Light Square configurations. Replace “X” with number of Light Squares in low output mode. For ON/OFF operation, replace “X” with “0”. Maximum two Light Squares in low output mode. Not available
with dimming driver. No terminal block with bi-level operation. 8 22" upsweep arm. Round pole adapter included. 9 Only for use with SL2, SL3, SL4 and AFL distributions. The Light Square trim plate is painted black when the HSS option
is selected. 10 This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your Eaton’s Cooper Lighting business representative for additional details. 11 One required for each
Light Square.
Dimensions
Arm Drilling
Dimensional Data
1, 2 or 3 Light Squares
Type "M"
5-7/32"
[132mm]
8-7/8" [225mm]
Number of
Light Squares
“A”
Length
1
21-1/2" (546mm)
2
27-5/8" (701mm)
3
33-5/8” (854mm)
4
27-5/8" (704mm)
6
33-5/8" (854mm)
A
4 or 6 Light Squares
5-7/32"
[132mm]
15" [381mm]
A
Lumen Multiplier
Lumen Multiplier
0°C
1.02
10°C
1.01
25°C
1.00
40°C
0.99
50°C
0.97
3/4" [19mm]
Dia. Hole
2-7/16" [62mm]
4-7/8" [124mm]
(2) 5/8" [16mm]
Dia. Holes
Optional Arm
Lumen Maintenance
Ambient Temperature
2-5/16"
[59mm]
22" Upsweep Arm
Ambient
Temperature
TM-21 Lumen
Maintenance
(60,000 Hours)
Theoretical L70
(Hours)
25°C
> 94%
> 350,000
40°C
> 93%
> 250,000
50°C
> 90%
> 170,000
2-3/8"
[60mm]
Rise 8" [203mm]
7"
[178mm]
9-3/4"
[246mm]
22" [559mm]
Additional Information
EPA (Effective Projected Area - Square Feet)
Compliances
UL and cUL Wet Location Listed
IP66 Light Squares
3G Vibration Rated
ARRA Compliant
ISO9001
Technical Data (Electronic Driver)
+40°C (104°F) Ambient Temperature Rating
-40°C (-40°F) Ambient Temperature Rating
Optional 50°C (HA) Ambient Temperature Rating
>0.9 Power Factor
<20% Total Harmonic Distortion
120-277V/50 and 60 Hz
347/60 Hz, 480V/60 Hz
Shipping Data (Approximate Net Weight)
Number of
Light Squares
Without Arm
With Arm
1 Square
2 Squares
3 Squares
4 Squares
6 Squares
0.8
1.0
1.2
1.2
1.4
1.2
1.3
1.5
1.5
1.7
1 Square 17 lbs. (7.7 kgs.)
2 Squares 22 lbs. (10.0 kgs.)
3 Squares 26 lbs. (11.8 kgs.)
4 Squares 31 lbs. (14.1 kgs.)
6 Squares 36 lbs. (16.3 kgs.)
NOTE: Specification and dimensions subject to change without notice.
10
Eaton's Cooper Lighting Business
Headquarters
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Canada Sales
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172
Our Lighting Product Brands
Halo
Halo Commercial
Portfolio
IRiS
RSA
Metalux
Corelite
Neo-Ray
Fail-Safe
MWS
Ametrix
Shaper
io
Lumark
McGraw-Edison
Invue
Lumière
Streetworks
AtLite
Sure-Lites
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Our Controls Product Brands
Greengate
iLumin
Zero 88
Fifth Light Technology
iLight (International Only)
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ADW140422
March 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
VerdeonTM
LED Roadway Luminaire
Innovation. Evolution.
A New Standard in LED Roadway
Lighting
Engineered for Performance and
Reliability
Whether on an urban street, a rural or residential road or a
highway, the Verdeon LED roadway luminaire gets the job
done. Combining low initial cost with superior energy
savings, the Verdeon luminaire provides warm, white light
with superior color rendering and uniform illumination of
the roadway surface. With simple, rugged construction
and a classic curved form, the Verdeon luminaire delivers
High performance, long life, low maintenance and low cost
are critical factors for any roadway lighting application. The
Verdeon luminaire is ideal for retrofit and new construction
projects, and it can be tailored to meet your specific needs
without compromising on important features. A single basic
housing accommodates a wide range of lumen packages, with
outstanding ten-year lumen maintenance. 4000K CCT / 70
CRI is standard; 6000K / 70 CRI and 3000K / 70 CRI are also
available. The LEDs are enclosed in IP66 rated optics and the
fixture is UL wet location listed with an IP66 housing option
available.
superior performance and unbeatable economics.
1
Real-world Features and Durability
From local to major roadways, the Verdeon luminaire is designed
to install easily, meet your performance requirements, and slash
your energy and maintenance costs. A tool-less, removable
driver door and quick electrical disconnects allow nearly
effortless installation and maintenance. The available 10kV UL
1449 surge protector provides state of the art protection against
voltage spikes, while a super TGIC polyester powder coat finish
provides years of worry-free ownership.
2
Design Features
The Verdeon luminaire is designed to provide superior optical performance combined with a variety of control options in a
package that’s easy to install and maintain. Industry-leading AccuLED Optics technology ensures maximum pole spacing and
uniformity when replacing 50-150W HPS fixtures.
TM
Construction
Optical
• Rugged, die-cast aluminum housing
• Tool-less entry with hinged, removable power door for quick,
easy maintenance
• 3G vibration rated
• IP66 rated LED optical enclosure
• UL wet location rated housing (IP66 housing optional)
• Wide range of lumen packages; replaces 50-150W HPS
luminaires in most roadway applications
• Outstanding lumen maintenance ratings at 25°C and 40°C
ambient temperatures (Consult spec sheet for specific lumen
maintenance data)
• AccuLED Optics technology provide precise, repeatable
lighting
• Type II, III and V distributions
Electrical
• -40°C to 40°C ambient operating temperature range; 50°C
High Ambient option available
• 10kV/10kA, UL 1449 surge protection available
• 120-277V 50/60Hz, 347V 60Hz or 480V 60Hz operation
• Quick electrical disconnects for tool-less removal of power
door
Finish
• Five-stage super TGIC paint resists extreme weather
conditions while providing optimal color and gloss retention.
Available in grey, bronze, black, dark platinum, graphite
metallic or white
Controls
• Controls-ready when equipped with ANSI 7-PIN twistlock
photocontrol receptacle
• Available with dimming motion control
Grey
Bronze
Black
Dark Platinum
Graphite Metallic
White
Warranty
• Five-year warranty
Optional Features
3
Surge Protection
7-PIN NEMA Twistlock Photocontrol Receptacle
UL 1449 Listed 10kV/10kA surge
protection against common
(line-to-ground) and differential
(line-to-line) mode surge.
ANSI C136.41 compliant. Enables wireless dimming when used with compatible
photocontrol. 3-PIN NEMA Twistlock Photocontrol also available.
EATON’S COOPER LIGHTING BUSINESS
Verdeon LED Roadway Luminaire
. . . . .....
IP66 Rated Optics . . . . . . . . . . . . .
.........
. . . . . . .....
. . . . . . . . Rugged Die-cast
Aluminum Housing
. . . . . . . . Tool-less Entry
Ease of Installation and Maintenance
Superior performance comes with years of low-cost, low-hassle ownership. With lumen maintenance and life expectancy far
beyond traditional HID light sources, regular and time-consuming service visits are a thing of the past. The simple and spacious
Verdeon fixture housing is designed to fit lineman’s gloves and can be installed with simple tools. The driver is mounted on the
power door, so service is tool-less. The door is small enough to hold in one hand, making field replacement quick and easy.
Tool-less Access
Hinged, Removable Power Door
Stainless steel latches provide easy,
Driver is mounted to door. Integral hinge allows door to hang securely while making
tool-less access to the electrical
wire connections and can be easily removed without the use of tools.
compartment, even with lineman’s gloves.
EATON’S COOPER LIGHTING BUSINESS
Verdeon LED Roadway Luminaire
4
Energy Savings
Energy Savings and Environmental Stewardship
The simplest and most effective way to reduce a lighting fixture’s impact on the environment is to minimize its energy
consumption. By incorporating solid state lighting technology from Eaton’s Cooper Lighting business, the Verdeon LED luminaire
provides energy savings up to 50 percent when compared to standard HID solutions. In addition to energy savings, the Verdeon
luminaire is RoHS compliant.
Long Life
With minimal ten-year lumen depreciation, the Verdeon LED luminaire operates many times longer than traditional HID fixtures.
The Verdeon LED luminaire was deliberately designed with an electrical compartment that is isolated from the LED modules in
order to optimize thermal dissipation of both the LED modules and electrical components insuring long operating life of all the
fixture components.
Warm White Color
4000K
Lighting designers, architects and specifying engineers
have long preferred light sources that provide a balanced
spectral power distribution and warm white light. Many
LED solutions standardize on a cool blue 5000-6000K
correlated color temperature (CCT) to maximize lumen
output. The Verdeon luminaire provides warm white
light at a standard 4000K CCT with no sacrifice in lumen
output.
2700K
3000K
nominal
4500K
6500K
High Pressure Sodium Metal Halide (Quartz, Ceramic)
(2000K)
AccuLED Optics
(4000K)
Cold LED
(6000-6500K)
Reduced Energy Consumption
Operating and maintenance costs of a lighting system are dramatically impacted by the specified lamp source, system power
consumption and the duration time of operation. Total system input watts and fixture operating life should be the driving
considerations when addressing energy consumption and total cost of ownership. Energy savings increase when energy
consumption is reduced and maintenance intervals are extended.
Annualized Energy and Maintenance Savings/Cost Comparison
Hours/Year
(12 Hours/Day)
Product
Verdeon LED Luminaire
70W High Pressure Sodium
Verdeon LED Luminaire
100W High Pressure Sodium
Verdeon LED Luminaire
150W High Pressure Sodium
4,380
4,380
4,380
Annual
Maintenance
Cost 2
System
Wattage
Cost/Year
at $.10 kWh 2
44,000
51W
$22.34
$0.00
$22.34
24,000
85W
$37.23
$21.50
$58.73
Expected Life
(Hours) 1
Total Annual
Operating Cost
44,000
64W
$28.03
$0.00
$28.03
24,000
128W
$56.06
$21.50
$77.56
44,000
92W
$40.30
$0.00
$40.30
24,000
185W
$81.03
$21.50
$102.53
Annual
Savings
Per Fixture
$36.39
$49.53
$62.23
NOTE: 1 Verdeon lumen maintenance 85% at 44,000 hours, per TM-21. 2 HID fixture, assumes 50% lamp replacement, $200 per re-lamp trip plus $15 per lamp, over five years.
Energy Savings/Equivalency/Cross Reference Guide
HID Wattage
LED Fixture Replacement
LED Wattage
HID vs. LED Energy
Savings
70W HPS
85W
Verdeon LED A018
51W
40%
100W HPS
128W
Verdeon LED A01
64W
50%
150W HPS
185W
Verdeon LED A02
92W
50%
HID Source
5
EATON’S COOPER LIGHTING BUSINESS
Verdeon LED Roadway Luminaire
Ordering Information
Sample Number: VERD-A01-D-U-T2-4N7-AP
Product Family 1
Light Engine 2
Driver 3
Voltage
Distribution
VERD=Verdeon
A01=1 LED, Full Output
A018=1 LED, Approximately 80% Output
A016=1 LED, Approximately 60% Output
A02=2 LEDs, Full Output
A028=2 LEDs, Approximately 80% Output
E=Non-Dimming
D=Dimming (0-10V) 4
U=Universal (120-277V)
8=480V 5
9=347V 5
T2=Type II
T3=Type III
T5=Type V
Options (Add as Suffix)
Colors
Accessories (Order Separately)
7030=70 CRI / 3000K CCT 6
7060=70 CRI / 5700K CCT 6
4=NEMA Twistlock Photocontrol Receptacle
4N7=NEMA 7-PIN Twistlock Photocontrol Receptacle 7
10K=10kV UL 1449 Surge Protective Device
IP66=IP66 Rated Housing
HA=50°C High Ambient Temperature
MS/DIM-L08=Motion Sensor for Dimming Operation, Maximum 8' Mounting Height 7, 8, 9
MS/DIM-L20=Motion Sensor for Dimming Operation, Maximum 9' - 20' Mounting Height 7, 8,9
MS/DIM-L40=Motion Sensor for Dimming Operation, Maximum 21' - 40' Mounting Height 7, 8, 9
DIMRF-LN=Factory Installed LumaWatt RF Dimming Control System (Mounting Height 16' and Up) 10, 11
DIMRF-LW=Factory Installed LumaWatt RF Dimming Control System (Mounting Height below 16') 10, 11
K=Level Indicator
4B=Four-bolt, Two-clamp Mounting
A15=Arm Included (15" Straight Arm) 12
AP=Grey (Standard)
BZ=Bronze
BK=Black
DP=Dark Platinum
GM=Graphite Metallic
WH=White
OA1223=10kV/10kA UL 1449 Surge Module
Replacement
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=NEMA Photocontrol - 120V
OA/RA1016=NEMA Photocontrol - Multi-Tap
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
FSIR-100=Wireless Configuration Tool for
Motion Sensor 13
HS-VERD=Verdeon House Side Shield
NOTES: 1 DesignLights Consortium® Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details. 2 Standard 4000K CCT and 70 CRI. 3 Consult factory for driver surge protection values.
4 Must specify 4N7 option. 5 Not recommended for use with ungrounded, delta configured systems. Not available with color option "A" raw aluminum. 6 Extended lead times apply. Use dedicated IES files for 3000K and 5700K when
performing layouts. These files are published on the Verdeon luminaire product page on the website. 7 Must specify dimming driver. 8 Not available with 4B option. Sensor mounted externally. Consult factory for more information.
9 The FSIR-100 accessory is required to adjust parameters. 10 LumaWatt wireless sensors are factory installed and require network components RF-EM1, RF-GW1 and RF-ROUT1 in appropriate quantities. See website for LumaWatt
application information. 11 LumaWatt wireless system is not available with photocontrol receptacle (not needed). 12 Round pole adapter and mounting hardware included. "M" drill pattern. 13 This tool enables adjustment of
parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your Eaton's Cooper Lighting business representative for additional details.
Dimensions
4-7/8"
[124mm]
9-5/8" [244mm]
30-1/2" [774mm]
Optional Arm
Arm Drilling
15" Straight Arm
TYPE "M"
2-5/16"
[59mm]
7"
[178mm]
3/4" [19mm]
Dia. Hole
2-7/16" [62mm]
2-3/8"
[60mm]
4-7/8" [124mm]
14-13/16" [376mm]
(2) 5/8" [16mm]
Dia. Holes
Additional Information
Compliances
Technical Data (Electronic Driver)
EPA (Effective Projected Area - Square Feet)
Shipping Data (Approximate Net Weight)
UL and cUL Wet Location Listed
IP66-Rated Optics
3G Vibration Rated
ISO 9001
DesignLights Consortium® Qualified*
+40°C (104°F) Ambient Temperature Rating
-40°C (-40°F) Ambient Temperature Rating
>0.9 Power Factor
<20% Total Harmonic Distortion
120-277V 50/60Hz
347V 60Hz, 480V 60Hz
0.5
20 lbs. (9.1 kgs.)
* DesignLights Consortium® Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details.
EATON’S COOPER LIGHTING BUSINESS
Verdeon LED Roadway Luminaire
6
Eaton's Cooper Lighting Business
Headquarters
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Canada Sales
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172
Our Lighting Product Brands
Halo
Halo Commercial
Portfolio
IRiS
RSA
Metalux
Corelite
Neo-Ray
Fail-Safe
MWS
Ametrix
Shaper
io
Lumark
McGraw-Edison
Invue
Lumière
Streetworks
AtLite
Sure-Lites
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Our Controls Product Brands
Greengate
iLumin
Zero 88
Fifth Light Technology
iLight (International Only)
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. ADW142500
January 2015
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.