NSL Architectural and Decorative Lighting 2014-2015 New Products! p. 2 p. 2 p. 6 p. 8 p. 28 p. 28 Celebrating our 28th year serving the lighting industry LED LV-DL Series Dimmable! 8 watt module 12W module Description Introducing the new LED Low Voltage Down Light (LV-DL series) from NSL. The LV-DL series utilizes high brightness Epistar COB (Chip on board) LEDs offering good thermal performance, low power consumption (8.2W with the LV-DL8 series, 13W with the LV-DL13 series) and a long lifespan of 50,000 hrs. The LV-DL8 series has 5 different trim designs to choose from while the LV-DL13 offers a small 110mm (4”) adjustable gimbal. Both LV-DL down lights feature a specifically designed heat sink to disperse heat and are powered by a constant current power supply that is dimmable with most trailing edge electronic dimming systems. Residential Applications 4 Kitchens 4 Pantries 4 Laundry rooms 4 Bathrooms 4 Living rooms Features • Energy efficient – up to 80% energy savings • High Brightness COB LED’s • Low power consumption • Warm white and neutral white color temperatures Commercial Applications 4 4 4 4 2 Lobbies Hallways Elevators Stairways 4 Retail 4 Restaurants 4 Office lighting • Available in two standard beam angles • New Construction, IC and remote installations • ETL Listed for direct contact with insulation and combustible materials • Self resetting thermal protector • Easy to install, modular design • 50,000 hour life National Specialty Lighting 2014 - 2015 LED LV-DL Series Dimmable! Specifications LV-DL8 series Power (W) Product Code LV-DL8-XX-WW 8.2 LV-DL8-XX-NW Size in inches (size in mm) Color Temperature WW/NW Lumen (lm) oI 2 x 3 5/32 (oI 50x80) 3000–3500K 618 oI 2 x 3 5/32 (oI 50x80) 4000–4500K 625 Beam Angle (°) Input Current (A) Input Voltage (V DC) 25/45 0.28 29 led products XX - Specify 25 or 45° Beam angle when ordering i.e. LV-DL8-45-WW (module) HOUSINGS: New Construction: LV-DL8-NC-A, IC: LV-DL8-IC-A, select corresponding A, B, or C housing to match A, B or C series trim selection. Remote LV-DL8-R Order as 3 separate components for complete fixture. I.E., LV-DL8-NC-B housing, LV-DL8-45-WW module, LV-DL08-B5-WH Trim LV-DL13 series Product Code Power (W) Size in inches (size in mm) 12 oI 2 3/4 x 4, cut out oI 3 9/16 (oI 70 x 102, cut out oI 90) LV-DL13XX-WW-YY LV-DL13XX-NW-YY Color Temperature WW/NW Lumen (lm) 3000–3500K 1080 4000–4500K 1140 Beam Angle (°) Input Current (A) Input Voltage (V DC) 30/60 0.28 42 YY – WH for white trim, AL for Aluminum trim XX - Specify 30 or 60° Beam angle when ordering i.e. LV-DL13-30-WW-WH (module) HOUSINGS: New Construction: LV-DL13-NC-C, IC: LV-DL13-IC. Remote: LV-DL13-R Order as 2 separate components for complete fixture. I.E., LV-DL13-NC housing, LV-DL13-60-WW-WH module/trim C Series B Series A Series LV-DL8 Trim Options LV-DL8-A1-AL Regressed baffle trim, aluminum, A Series oI 3 5/32” (80mm) LV-DL8-A1-WH Regressed baffle trim, white, A Series oI 3 5/32” (80mm) LV-DL8-A2-AL Regressed single gimbal trim, aluminum, A Series oI 3 5/16” (88mm) LV-DL8-A2-WH Regressed single gimbal trim, white, A Series oI 3 5/16” (88mm) LV-DL8-B5-AL Double gimbal flush trim, aluminum, B Series oI 4 1/16” (103mm) LV-DL8-B5-WH Double gimbal flush trim, white, B Series oI 4 1/16” (103mm) LV-DL8-C3-AL Deep regressed baffle trim, aluminum, C Series oI 4 11/94” (109mm) LV-DL8-C3-WH Deep regressed baffle trim, white, C Series oI 4 11/94” (109mm) LV-DL8-C4-AL Deep recessed square baffle trim, aluminum, C Series oI 4 11/94” (109mm) LV-DL8-C4-WH Deep recessed square baffle trim, white, C Series oI 4 11/94” (109mm) LV-DL8 Trim Options LV-DL8-A1-WH LV-DL8-A2-WH LV-DL8-B5-WH LV-DL8-C3-WH LV-DL8-C4-WH 3 LED LV-DL Series Dimmable! Photometrics LV-DL8-45-WW 3.3ft 59.2/94.4fc 637.6/10161.0x 2.7ft 6.6ft 14.8/23.6fc 159.4/254.1x 5.5ft 9.8ft 6.6/10.5fc 70.8/112.9x 8.2ft 13.1ft 3.7/5.9fc 39.6/63.5x 10.9ft 16.4ft 2.4/3.8fc 25.5/40.7x Height Eavg/Emax 13.7ft Angle: 45.2 deg Diameter Note: The Curves indicate the illuminated area and the average illumination at a set distance from the LED Down Light. LV-DL13-60-NW 3.3ft 78.9/125.3fc 849.3/13481.0x 3.2ft 6.6ft 1.4/3.6fc 212.3/337.1x 6.3ft 9.8ft 8.8/13.9fc 94.4/149.8x 9.5ft 13.1ft 4.9/7.8fc 53.1/84.3x 12.7ft 16.4ft 3.2/5.0fc 34.0/53.9x Height Eavg/Emax 15.8ft Angle: 51.5 deg Diameter Note: The Curves indicate the illuminated area and the average illumination at a set distance from the LED Down Light. 4 National Specialty Lighting 2014 - 2015 LED LV-DL Series Dimmable! Approved Dimmers NC Housing Description LV-DL8-NC-A New construction housing c/w driver, A Series oI 2 11/16” (68mm) LV-DL8-NC-B New construction housing c/w driver, B Series oI 3 1/8” (79mm) LV-DL8-NC-C New construction housing c/w driver, C Series oI 3 3/4” (95mm) IC Housings LV-DL8-IC-A Insulated ceiling housing c/w driver, A Series oI 2 11/16” (68mm) LV-DL8-1C-B Insulated ceiling housing c/w driver, B Series oI 3 1/8” (79mm) LV-DL8-IC-C Insulated ceiling housing c/w driver, C Series oI 3 3/4” (95mm) Remote LV-DL8-R Junction Box with Driver, 1 7/8” x 1 1/2” x 6” Extension cords LV-DL-EX-10 Lutron - Skylark - SELV300P Lutron - Maestro - MAELV 600 Lutron - NovaT- NTELV 300 Lutron - Diva - DVELV 300P Leviton - Illumatech - IPE04 Leviton - Sureslide - 6615 Leviton - Vizia - VZE061LZ Lutron - AYCL-153 Lutron - CTCL-153 Lutron - DVCL-153 Lutron - MACL-153 10’ Remote extension lead LV-DL13 Housings & Accessories Product Codes LV-DL8-25-NW 8 watt, 25° beam angle, 4000–4500K, Neutral White Module NC Housing Description LV-DL13-NC-C New construction housing c/w driver, oI 3 3/4” (95mm) LV-DL8-25-WW 8 watt, 25° beam angle, 3000–3500K, Warm White Module Insulated ceiling housing c/w driver, oI 3 3/4” (95mm) LV-DL8-45-NW 8 watt, 45° beam angle, 4000–4500K, Neutral White Module IC Housings LV-DL13-IC-C Remote LV-DL13-R Junction Box with Driver, 1 7/8” x 1 1/2” x 6” LV-DL8-45-WW 8 watt, 45° beam angle, 3000–3500K, Warm White Module 10’ Remote extension lead LV-DL13-30-NW-AL 13 watt, 30° beam angle, 4000–4500K, Neutral White, Aluminum Trim Extension cords LV-DL-EX-10 led products LV-DL8 Housings & Accessories LV-DL13-30-WW-AL 13 watt, 30° beam angle, 3000–3500K, Warm White, Aluminum Trim Color Options LV-DL13-30-NW-WH 13 watt, 30° beam angle, 4000–4500K, Neutral White, White Trim LV-DL13-30-WW-WH 13 watt, 30° beam angle, 3000–3500K, Warm White, White Trim LV-DL13-60-NW-AL 13 watt, 60° beam angle, 4000–4500K, Neutral White, Aluminum Trim LV-DL13-60-WW-AL 13 watt, 60° beam angle, 3000–3500K, Warm White, Alumsinum Trim LV-DL13-60-NW-WH 13 watt, 60° beam angle, 4000–4500K, Neutral White, White Trim Warm White Module Neutral White Module LV-DL13-60-WW-WH 3 watt, 60° beam angle, 3000–3500K, Warm White, White Trim 5 LED Hard Strip Dimmable! 5/8" 16mm Photometrics on page 54 5/8" 16mm Three lengths available 11.8" (300mm), 19.7" (500mm), 39.4" (1000mm) Description Three lengths available 11.8" (300mm), 19.7" (500mm), 39.4" (1000mm) 13/16" 21mm Light Emitting Diode (LED) Hard Strips Series combines high output LED’s in a unique linkable extrusion ideal for under 13/16" 21mm cabinet, showcases, and in cabinet applications. LED Hard Strips is available in 3 sizes and 4 mounting options providing seamless, even distribution of light delivering outstanding light output and low power consumption. Mounting Options Accessory Applications 4 4 4 4 4 Under Counter Display Cases Cabinet Interiors Work Stations Linear interior decorative lighting 0º 0º 30º 45º 30º 45º LMSII-001 Terminal Block and Junction Box for connection to additional lengths of power cable if needed Rotary Mounting Mounting Clip Clip Rotary Rotary Mounting Clip Features • Uses high brightness 0.5W SMD PLCC-2 LEDs as lighting source • Even light with 120° viewing angle • 24V DC • 3 sizes (11 13/16”, 19 11/16”, and 39 3/8”) • Convenient connector between two strips • Diffused frosted lens to reduce glare • 40,000 hour rated life 6 5/8" 16mm Three lengths available 11.8" (300mm), 19.7" (500mm), 39.4" (1000mm) 13/16" 21mm National Specialty Lighting 2014 - 2015 LED Hard Strip Dimmable! LV-HS-XX*-24T2-1Y** LV-HS-XX*-24T2-2Y** LV-HS-XX*-24T2-3Y** 3000K +/- 200K 4200K +/- 200K 6200K +/- 200K – 3000K +/- 200K 4200K +/- 200K 6200K +/- 200K – 3000K +/- 200K 4200K +/- 200K 6200K +/- 200K – Color Temperature Warm White Neutral White Cool White RGB Lens Y** Y** Y** Size 11 13/16” x 5/8” x 25/64” 19 11/16” x 5/8” x 25/64” 39 3/8” x 5/8” x 25/64” Input Voltage (VDC) 24 Power per strip 3.6W 6W 12W Lumens (lm) Cool White Neutral White Warm White RGB 280 270 252 – 480 450 420 – 960 900 840 – LED Qty. per strip 18 30 60 Viewing Angle 120° 40,000 hours LED Life * XX = LED color: WW = warm white (3000K), NW = neutral white (4200K), CW = cool white (6200K), RGB ** Y = Lens: F = frosted, clear lens on RGB LED Hard Strip LV-HS-PC1-12 12" Power Connector for LED Hard Strip single color, Bar - Bar driver options Portable Drivers Accessories LV-HS-PF1-12 12" Power Feed for LED Hard Strip single color, Bar - DC plug power supply led products Specifications LV-HS-PF1-39 39" Power Feed for LED Hard Strip single color, Bar - DC plug power supply LV-HS-PC1-39 39" Power Connector for LED Hard Strip single color, Bar - Bar LV-HS-PF1-HW 36" Power Feed for LED Hard Strip single color, Bar - Hard wire power supply LV-HS-PF2-12 12" Power Feed for LED Hard Strip RGB, Bar DC plug power supply LV-HS-PC1-3 3" Power Connector LED Hard Strip single color, Bar - Bar (Both with six foot (72”) power cord to polarized 2-prong, AC plug and 60” lead wire to DC plug and switch, cUL/us Listed) LV-HS-PF2-39 39" Power Feed for LED Hard Strip RGB, Bar DC plug power supply LV-HSDR-36-24-PC 36W plug-in driver, 24V, DC Portable Driver, 1.5A output, 100V–240V input voltage LV-HSDR-60-24-PC 60W plug-in driver, 24V, DC Portable Driver, 2.5A output, 100V–240V input voltage Non Dimmable Drivers LV-HS-PF2-HW 36" Power Feed for LED Hard Strip RGB, Bar Hard wire power supply LV-HS-PC2-3 3" Power Connector LED Hard Strip RGB, Bar - Bar LV-HS-PC2-12 12" Power Connector for LED Hard Strip RGB, Bar - Bar LV-HS-PC2-39 39" Power Connector for LED Hard Strip RGB, Bar - Bar LEDDR-24-120W Max recommended load 90W per single tap, 120W combined two secondary taps. 120W hardwire Input: 100 - 240V AC Output: 24V DC 10” x 3 3/8” x 3 3/16” Dimmable Drivers (All with Input: 120V AC Output: 24V DC) LV-HS-CN-3DC LV-HS-EC Connector for Hard End Cap for Strip, with 12" wire lead LED Hard Strip and 3 DC connectors LV-TC101 Mini Three Button Dimmer 24V, 96W LV-RF103 Wireless RF Mini RGB Controller 24V, 96W TR24L20DC Max. recommended load 18W, min 9W LED Hard Strip 20W hardwire 5.6” x 2” x 2.14” TR24L40DC Max recommended load 36W, min. 18W LED Hard Strip 40W hardwire 5.6” x 2” x 2.14” TR24L60DC Max recommended load 54W, min 30W LED Hard Strip 60W hardwire 6.55” x 2.25” x 2.55” LV-HS-MC0 Mounting clip (2pk) LV-HS-MC30 Mounting clip 30° (2pk) LV-HS-MC45 Mounting clip 45° (2pk) Each Rigid bar ships with two pieces of 0° Mounting Clip LV-HS-MCRT Rotary Mounting clip (2pk) TR24L96DC Max recommended load 90W, min. 50W LED Hard Strip 96W hardwire 6.55” x 2.25” x 2.55” 7 LED LP Puck Lights Dimmable! Underside of Cabinet Recess Mount Surface Mount 2-5/8" cut-out Description 11/16" Save up to 87% in running costs compared to 20 watt xenon or halogen puck lights. Use in cabinets, 2-15/16" display cases, retail environments, cubbies, entertainment centers, back bar areas, wine rooms, china Diameter cabinets, built-in shelving and anywhere a low-profile, economical puck light is required. 1/8" Applications 4 Under Counter 4 Over cabinets 4 Indirect lighting 4 Display cases 4 Furniture, shelf lighting Recess Enc Features • Warm White (3000K) LED light with 80 CRI • Plastic housing in two attractive finishes • Easy installation – no lamps to replace, no dimmers to install! • Produces minimal heat – helps keep displays cool • Long life LEDs last up to 30,000 hours • High light output – each puck delivers 125 lumens 8 Recess Mount Surface Mount 25 cut 2-5/8" cut-out 11/16" 7/8" 11/16" 2-15/16" Diameter 1/8" 2-15/16" Diameter National Specialty Lighting 2014 - 2015 2 15 LED LP Puck Lights Dimmable! Specifications Photometrics on page 54 Input Voltage: Wattage Maximum Run LED specs Color Temperature Color Rendering Index Dimmers Lead wires Construction Dimensions Mounting Cut-out LP-X-YY X = KIT 1 = Single Puck 3KIT = 3 Puck Kit 5KIT = 5 Puck Kit YY = Fixture Finish Note: WH = White BK = Black LP-3KIT-YY includes 3-hub connector, 9W plug-in driver and inline dimmer. LP-5KIT-YY includes 6-hub connector, 15W plug-in driver and inline dimmer. led products ordering logic 120V, 60 Hz AC operation (15V DC driver output) LP-1 = 2.9W, LP-3KIT = 8.2W, LP-5KIT = 13W 6 single pucks or one 5-light kit plus one single puck using LP-6P-15W (included with 5-light kits) 5630 SMD LEDs, 30,000 hours rated life Warm White (3000K) 80 Dimmable with inline dimmer attached to plug-in drivers (LP-3P-9W and LP-6P-15W) 60” lead wires Heavy duty, hard durable plastic H = 7/8” (surface mounted), H = 1/8” (recessed mounted), Diameter = 2-15/16” Recess or surface mount 2-5/8” hole size for recessed mounting Connections Diagram Figure 3 Power connection hub with attached dimmer Power supply brightness adjustment dial (0-100%) LED driver options Dimmable LP-3P-9W 9W plug-in driver, 120V, AC input, 15V, 600mA output; with six foot (72”) power cord to polarized 2-prong AC plug and 60” lead wire to hub; includes 3-port hub and inline linear dimmer with 58” lead wire, cUL/us Listed All photos and illustrations © 2015 National Specialty Lighting LP-6P-15W 15W plug-in driver, 120V, AC input, 15V, 1Amp output; with six foot (72”) power cord to polarized 2-prong AC plug and 60” lead wire to hub; includes 6-port hub and inline linear dimmer with 58” lead wire, cUL/us Listed 9 LED Tape Light Dimmable! Eye Level View Underside of Cabinet LED MiniDisc Scoop Light in Cool White Description LEDs mounted to Flexible Printed Circuit Board with 4.3 watts per foot brightness. Minimal fixture profile of just 2.0mm (3/32”) high by 10mm (13/32”) wide. Field cuttable and reconnectable every 4”. Safe, Class 2 remote LED Drivers power up to 20 ft. of product in a single run. Dimmable. Easy mounting with 3M tape pre-applied to back of fixture. Offered in six LED colors. ETL Listed for Indoor Use only. ordering logic Applications 4 4 4 4 Under Cabinet Task Light Work Stations Over Cabinet Accent Light Coves 4 Soffits 4 Interior Rails 4 Visual Merchandising 4 Exhibit Projects LTP-XX-YY XX = STRIP LEngth 10 = 10 ft. 19.3 = 19 ft., 4 in. 20 = 20 ft. Spool Note: When ordering cut lengths, orders are rounded to the nearest foot YY = Color WW = Warm White (3000K) CW = Cool White (6000K) BL = Blue RD = Red GR = Green AM = Amber Features • 4.3 watts per foot • Dimmable • Only 3/32” (2.0 mm) high • Available in 6 LED colors: Warm White, Cool White Red, Blue, Green and Amber • Only 13/32” (10.0 mm) wide 20 ft. max. single run • Cuts and reassembles every 4” • Class 2, 24VDC input c Suitable for • 3M mounting tape pre-applied 10 • Indoor dry use only LED Tape Light Dimmable! Specifications Cool White (3000K) Warm White (6000K) Amber, Red, Blue, Green 4.3 watts/ft, 180mA, 24VDC Electrical Rating 20 Feet Maximum Single Run Every 4” at mark Cutability Average LED Life 35,000 hours at 70% illumination Mounting Surface Dry indoor only Lumen Output Efficacy 325 Lumens per ft 285 Lumens per ft 75 Lumens per watt 66 Lumens per watt led products Every 5/8”, five LEDS per 4” section LED Spacing 40F to 90F surface temp. range Temperature Limits Dimmable with magnetic analog dimmer and correct LED Driver Dimming ETL listed Indoor Dry locations Two years. See back cover for details. Agency Approval Warranty Photometrics on page 54, 55 LED Color options Warm White (3000K) Cool White (6000K) Amber purchase options Red Green Blue LED driver options Dimmable 20 ft. Spools TR24L20DC TR24L40DC TR24L60DC TR24L96DC Custom cuts every 4” to 20 ft. max. Min. feet 1.6 4 7 11 Max. feet 4.5 9 14 20 24VDC, 20-96W, Class 2 5.6” x 2” x 2.14” or 6.55” x 2.25” x 2.55” See page 58 for details. Accessories Power Cord, 6 ft LTP-001-6R Power Cord, 12 ft LTP-001-12R Power Cord Opposite End, 6 ft, LTP-001-6L Power Cord Opposite End, 12 ft, LTP-001-12L All photos and illustrations © 2015 National Specialty Lighting Step Cord, 2 in LTP-STP-2IN Step Cord, 6 in LTP-STP-6IN Step Cord, 2 ft LTP-STP-2 Step Cord, 12 ft LTP-STP-12 In-Line Connector LTP-002 Plastic Mounting Channel, 4 ft Predrilled with Screws LTP-010-S Terminal Block and Junction Box LMSII-001 For connection to additional lengths of power cable if needed 11 LED eStrip Dimmable! Description Flexible rail illumination LEDs mounted to Flexible Printed Circuit Board technology, and extruded in a 6mm x 12mm PVC light strip. Crush proof to 100 psi. LEDs consume only 0.96 watts per foot. Field cuttable every 6” and reconnectable with user installed male and female connectors. Optional molded “+”, “T”, “L” and wire “Flex” connections are available. Safe, Class 2 LED Drivers power up to 90 feet of product in a single run. ETL listed for indoor and outdoor applications. Offered in six LED colors. Applications 4 Decks 4 Soffits 4 Eaves 4 Coves 4 Stairs 4 Rails Cove illumination ordering logic LES-XX-YY XX = STRIP LEngth 10 = 10 ft. 24 = 24 ft. 90 = 90 ft. 4 Visual Merchandising 4 Exhibit Projects 4 Theatrical Projects YY = Color WW = Warm White CW = Cool White BL = Blue RD = Red GR = Green AM = Amber Note: When ordering cut lengths, orders are rounded to the nearest foot Specifications Voltage Energy Usage LED Life LED Colors LED Color Temperature LED Spacing Profile Max. Single Run Max. Mounting Surface Temp. Cuttability Connections Dimming Agency Approval Warranty 24VDC 0.96 watts per foot LEDs rated at 40,000 hours Warm White, Cool White, Blue, Red, Green, Amber Warm White = 3000K +/- 200K, Cool White = 5800K +/- 200K 1” on center Amber, Red, Green, Blue, 1/4” x 1/2” (6 mm x 12 mm), height x width Cool White, Warm White 90 feet - 40F to +104F Field cuttable every 6” User installed male and female connectors. Molded “+”, “T”, “L” and wire “Flex” connectors. Molded extension cords. Indoor listed CL2 cords allow wire to be passed through cabinets and walls to/between fixtures. Outdoor listed burial cords allow wire to be routed below grade to/between fixtures. See instructions for details. Dimmable with appropriate LED Magnetic Power Supply and dimmer. See instructions for details. ETL Listed for indoor and outdoor applications Two years. See back cover for details. Features • Available in: Warm White, Cool White, Blue, Red, Green, Amber • “+”, “T”, “L” and wire “Flex”connectors available LED Task Star • Maximum single run of 90 feet • 0.96 watts per foot • Safe 24VDC Class 2 power supplies • Dimmable • CL2 and burial cords 12 COlor options Cuttable and reconnectable every 6” In-Line Connector • 1/4” x 1/2” PVC (6mm x 12mm) covering flexible printed circuit board Suitable for • 1” LED Spacing • Indoor and outdoor applications National Specialty Lighting 2014 - 2015 LED eStrip Dimmable! 6’ Power Cord LES-001-6CL 12’ Power Cord LES-001-12CL 2’ Step Cord LES-STP-2CL 12’ Step Cord LES-STP-12CL Flex Cord LES-FLEX-CL 6’ Power Cord LES-001-6BR 12’ Power Cord LES-001-12BR 2’ Step Cord LES-STP-2BR 12’ Step Cord LES-STP-12BR Flex Cord LES-FLEX-BR In-Line Connector LES-002 (2 per bag) Note: Push-On End Cap LES-003-2 (2 per bag) Molded End Cap LES-003-3 (2 per bag) Molded “T” Connector Left/right Feed LES-BFTR Molded “T” Connector Bottom Feed LES-BFTD All molded connectors ship with required male or female fittings to attach to LED eStrip. LED eStrip Cabinet Wiring led products accessories Inside applications (CL2 wire allows through wall wiring) Molded “L” Connector LES-BFLN Molded “+” Connector LES-BFXN Photometrics on page 55 accessories mounting options LMSII-001 Terminal Block and Junction Box for connection to additional lengths of power cable if needed Nail Clips LES-005 (30 per bag) LED eStrip CL2 Wire Class 2 Power Supply Wall CL2 wire allows thru-wall penetration for optimal remote Class 2 Power Supply installation Saddle Mount with Tie Wraps LES-008 (30 per bag) 4’ Plastic Mounting Channel LES-010 LES-010-S: pre-drilled with screws LES-010-T: with double-sided tape LED driver options non dimmable LED eStrip Burial Wiring Class 2 Power Supply Dimmable TR24L20DC TR24L40DC TR24L60DC TR24L96DC Burial wire allows outdoor in-ground use for optimal remote Class 2 Power Supply installation Wall LED eStrip Burial Wire LES-24-65W, 24VDC, 65W, Class 2, Indoor only, plug-in Includes LED eStrip molded connector on secondary cord. No power cord required. 4.5” x 2.1” x 1.5” 1 - 65 Feet Min. # of Feet 8 18 28 48 Max. # of Feet 20 40 60 90 24VDC, 20-96W, Class 2 5.6” x 2” x 2.14” or 6.55” x 2.25” x 2.55” See page 58 for details. 13 LED Thin Star Dimmable! Applications 4 Under Counter 4 Work Stations 40% brighter than Xenon 4 Display Cases 4 Cabinet Interiors 4 Podiums Slim 7/16” profile 4 Consoles Description Elegant, low profile LED under cabinet light fixture. Fixture vertical profile of only 7/16” for cabinets with little reveal. Available in four finishes of white, bronze, aluminum and black. Two fixture sizes of 6 LEDS and 12 LEDs per fixture. System scalable to a maximum combination of fixtures of 60 LEDs total per single run. Molded accessories provide ‘plug-and-play’ installation. System is dimmable with the appropriate LED Magnetic power supply and dimmer. ETL listed for indoor applications. Schematics 7 LED Thin Star Wiring 16 Wall 1 LED Thin Star CL2 Wire 1 3/8" 11.125” LTH-6-YY 21.825” LTH-12-YY CL2 wire allows thru-wall penetration for optimal remote Class 2 Power Supply installation Class 2 Power Supply Features • • • • • Low energy usage of 3.2w and 6.4w Pleasingly warm color temperature of 3000K Max. fixtures per LED Driver 5 pcs of 12-LED fixtures 10 pcs of 6-LED fixture or 60 total LEDs max. per driver Dimmable Mini USB connectors • Easy mounting with either double-sided tape or wood screws 14 • 7/16” low profile Fixture Joiner • Fixture Colors: White, Bronze, Aluminum, Black • Easy wiring with pre-molded extension cords and joiner sections • Safe 24 Volt, Class 2 power supply (ordered separately) Mini USB Connector on all cords Suitable for • Surface mounted indoor applications LED Thin Star Dimmable! Specifications Photometrics Extension Cords Joiner Cord Colors Joiner Colors Dimming Agency Approval Warranty ordering logic LTH-X-YY X = Number of LEDs 6, 12 YY = Fixture Finish WH = White BZ = Bronze AL = Aluminum BK = Black fixture finish options White finish accessory Bronze finish Aluminum finish Black finish Terminal Block and Junction Box LMSII-001 for connection to additional lengths of power cable if needed 12’ Power Cord LTH-001-12WH (white) LTH-001-12BN (brown) LTH-001-12BK (black) LTH-001-12CL (CL2) 1.5’ Male-to-Male Cord Connects fixture-to-fixture LTHMM-1.5-WH (white) LTHMM-1.5-BN (brown) LTHMM-1.5-BK (black) LTHMM-1.5-CL (CL2) 3’ Male-to-Male Cord Connects fixture-to-fixture LTHMM-3-WH (white) LTHMM-3-BN (brown) LTHMM-3-BK (black) LTHMM-3-CL (CL2) 6’ Male-to-Male Cord Connects fixture-to-fixture LTHMM-6-WH (white) LTHMM-6-BN (brown) LTHMM-6-BK (black) LTHMM-6-CL (CL2) accessories 6’ Power Cord LTH-001-6WH (white) LTH-001-6BN (brown) LTH-001-6BK (black) LTH-001-6CL (CL2) LED driver options accessories NON Dimmable Dimmable TR24L20DC TR24L40DC Fixture Joiner LTH-JOIN-WH (white) LTH-JOIN-BN (brown) LTH-JOIN-AL (aluminum) LTH-JOIN-BK (black) led products on page 54 24VDC 6 LED = 3.2 watts, 12 LED = 6.4 watts LEDs rated at 40,000 hours 3,000K +/- 200K White, bronze, aluminum, black 6 LED = 11.125”, 12 LED = 21.825” Included double-sided tape and wood screws Indoor listed SPT-1 cords allow wire to pass through cabinets with access, but not walls. Indoor listed CL2 cords allow wire to be passed through cabinets and walls to/between fixtures. See instructions for details. Male/male: 1.5’, 3’, 6’. Maximum 91’ total of extension cords per driver 0.875” after installation White, Brown, Black White, Brown, Black, Aluminum Dimmable with appropriate LED Magnetic Power Supply and dimmer. See instructions for details. ETL Listed for indoor applications Three years. See back cover for details. Voltage Wattage LED Life LED Color Temperature Fixture Finish Fixture Length Mounting Connection Wire Screw Clips WSC-004 (30 per bag) LTH-24-65W 24VDC, 65W, Class 2 Indoor only, plug-in Includes LED Thin Star molded connector on secondary cord. No power cord required. 4.5” x 2.1” x 1.5” 6 - 60 LEDs Min. # of LEDs 18 36 Max. # of LEDs 30 60 24VDC, 20-40W, Class 2 5.6” x 2” x 2.14” or 6.55” x 2.25” x 2.55” See page 58 for details. 15 LED Task Star Dimmable! Twice as bright as Xenon Applications 4 Under-cabinet task light 4 Work stations 4 Over-cabinet accent light 4 Laboratories 4 Display cases and exhibits 4 Merchandising 4 Indirect accent light 4 Wall units and bars Description Completely self-contained under counter light fixture with replaceable 120VDC LED Modules included. Dimmable. Twice the light output as Xenon/Halogen technology with 72% energy savings. 120VAC in and out up to 150 replaceable LED Modules per 15A tap. Numerous contractor preferred 1/2” knockouts in each fixture. Offered in five sizes and four fixture finishes. UL Listed Damp Location. • New low-profile lens release Features • Replaceable 120VDC LED Modules • Twice the light output of Xenon/Halogen technology • Pleasingly warm color temperature of 3100K • Dimmable • Captive screw mounting • Energy usage from 5.2 to 26.0 watts per fixture • Maximum of 150 LED Modules per 120VAC, 15AMP circuit 16 • Light, efficient aluminum frame stamped for 120V hard wire input • Available in 4 colors: Aluminum, Black, Bronze, and White • Available in five fixture lengths • Numerous 1/2” knockouts • Long life rectifier included. No integral LED driver required • 120VAC in and out of fixture • Uses standard household RomexTM wire input/output • Push-in connectors included for ease of power input Suitable for • Indoor and Damp Locations National Specialty Lighting 2014 - 2015 LED Task Star Dimmable! Voltage Energy Usage 120VAC input 1 module = 5.2 watts, 2 module = 10.4 watts, 3 module = 15.6 watts, 4 module = 20.8 watts, 5 module = 26 watts 3100K +/- 200K Replaceable 120VDC LED Module rated at 40,000 hours White or black powder coating; bronze, or natural aluminum Aluminum extruded frame with injection molded ends for low fixture weight and consistency of finish. Frosted glass for even light distribution. Hinged to aluminum frame for ease of fixture installation and security. Low-profile lens release. Hardwire can be parallel wired (“daisy chained”) up to 150 LED Modules. Dimmable with specified 120VAC dimmer. See instructions for details. UL listed and labeled. Damp location. Three years. See back cover for details. LED Color Temperature LED Module Life Fixture Finish Construction Lens Wiring Options Dimming Agency Approval Warranty fixture finish options White accessories Bronze led products Photometrics on page 54 Specifications Replaceable LED Module LEDMOD-32-FF Black Aluminum 3 Module = 26” 4 Module = 34.5” fixture lengths 1 Module = 9” 2 Module 4 1/2=" 17.5” 5 Module = 38.5” 4.625" ordering logic 11/2" 11/2" LTS-Z-XX/YY 1/2" 1 Knockout/2" Knockout Z = Number of LED MODULES 1, 2, 3, 4, 5 XX =1 Type " 1 /4 HW11/=4" Hard Wire YY = Fixture Finish WH = White BZ = Bronze Schematics BK = Black AL = Aluminum 4 . 6 2 5" 4.625" 1. 5" 4 1/2" 9” 1/2" Knockout XTL-1-XX/YY One Bulb Xenon Task Light LTS-1-XX/YY XTL-2-XX/YY OneBulb LEDXenon Module Two TaskLED LightTask Star 17.5” 26” LTS-2-XX/YY XTL-3-XX/YY TwoBulb LED Xenon Module LED Task Star Three Task Light 26” 34.5” XTL-4-XX/YY LTS-3-XX/YY 38.5” 34.5” XTL-5-XX/YY LTS-4-XX/YY Four BulbLED Xenon Task Light Three Module LED Task Star 4 1Xenon /2" Task Light Five Bulb Four LED Module LED Task Star 38.5” LTS-5-XX/YY Five LED Module LED Task Star 9” 17.5” All photos and illustrations © 2015 National Specialty Lighting 1. 2 5" 9” LTL-1-XX/YY One Bulb17 LED Task Light 17.5” LTL-2-XX/YY Two Bulb LED Task Light LED Mini Star II Dimmable! Applications 4 Under cabinets 4 Cabinets 4 Shelves 4 Display cases 4 Work stations 3 Light cabinet application Bronze finish Only 10.5 watts total Description Ultra thin 3.26 watt LED under cabinet light fixture. Energy savings of 82% vs. Xenon/Halogen technology. Fixture circuitry allows expandable system design from 1 to 25 fixtures per remote power supply. 24VDC replaceable module included. Four fixture finishes of white, bronze, aluminum and black. Dimmable. Actual Size slim profile Schematics 3" 3" 3" 3" 1/2" 36” Lead Wire . Features • No custom cords to buy or hide. • Optional CL2 lead wire to terminal block connectors. CL2 wire is listed to allow wall penetration. See instructions. • Energy usage of only 3.26 watts per fixture 18 36” Lead Wire • The same light output of Xenon/Halogen technology • Pleasingly warm color temperature of 3000K • Replaceable 24VDC LED Module rated at 40,000 hours Slim Profile • Ultra thin 1/2” fixture profile • Available in four fixture finishes: White, Bronze, Aluminum, Black Suitable for • Damp Location National Specialty Lighting 2014 - 2015 LED Mini Star II Dimmable! Photometrics on page 57 Specifications Voltage Fixture Energy Rating LED Color Temperature LED Module Life Construction Cover Finish Base Finish Wiring Options Dimming Agency Approval Warranty led products 24VDC 24VDC, 135mA, 3.26 watts 3000K +/-200K Replaceable 24VDC LED Module rated at 40,000 hours Die cast aluminum base. Injection molded plastic covers. Frosted tempered glass lens. White, Bronze, Aluminum, Black Aluminum Individual fixtures can be mixed and matched up to 25 fixtures per driver. Each fixture ships with 36” of lead wire. Dimmable with appropriate LED Magnetic Power Supply and dimmer. See instructions for details. ETL listed and labeled for all under-cabinet and in-cabinet applications. Damp Location. Three years. See back cover for details. fixture color options White Bronze ordering logic Aluminum Black LMSII-Z-YY Z = FIXTURE TYPE YY = FIXTURE FINISH F = Individual Fixture WH = White BZ = Bronze BK = Black AL = Aluminum LED driver options NON Dimmable Each fixture includes: (1) LED Mini Star II light fixture with 36” lead wire and mounting hardware Dimmable TR24L20DC TR24L40DC TR24L60DC TR24L96DC LEDDR-24-120W 120W Driver, Class 2 11.6”x 3.6”x 2.25” 1-18 fixtures (2 runs of 9 fixtures maximum) See page 58 for details. LMS-24-60W 24VDC, 60W, Class 2 Indoor only, plug-in Includes terminal block/ junction box for fixture lead wire connection. 4.5” x 2.1” x 1.5” 1 - 10 fixtures Wiring (1) Junction Box with Terminal Block (3) Wire screw clips Min. # of Fixtures 2 4 8 14 Max. # of Fixtures 5 10 15 25 24VDC, 20-96W, Class 2 5.6” x 2” x 2.14” or 6.55” x 2.25” x 2.55” See page 58 for details. Single fixture wiring schematic LMSII-001 Terminal Block Connector LMSII-001 Terminal Block Connector Note: LMSII-001 Terminal Block Connector 4 All lead wire can be cut to exact lengths Driver 4 No custom cords to buy/stock 4 No excess cord to hide LED Mini Star II LED Mini Star II LED Mini Star II LMSII-001 Terminal Block and Junction Box accessories LED Module LEDMOD-24-LP Replaceable 24VDC LED Module Terminal Block and Junction Box LMSII-001 Single fixture wiring only Wire Screw Clips WSC-004 (30 per bag) Lead Wire LW-18G-CL2 19 LED Sconce Star Outdoor application with minimal ambient light Dimmable! Indoor application with soft ambient light Description Completely self-contained die cast aluminum wall mount fixture of only 10.4 watts with replaceable 120VDC LED Modules included. Dimmable. Energy savings of 72% vs. Xenon/Halogen technology. 120VAC input and output of up to 75 fixtures per 15A tap. Two light sources per fixture (up and down lighting), each with two different sized openings. Unplugging one module allows one light source option. Offered in four fixture finish colors. Applications 4 Hallways 4 Stairs 4 Entryways 4 Doorways 4 Garages 4 Porches 4 Walkways Features • Replaceable 120VDC LED Modules • Pleasingly warm color temperature of 3100K • Removal of one module does not affect illumination of remaining module • Energy usage of 10.4 watts per fixture (5.2 watts per Module) • Maximum of 75 fixtures per 120VAC, 15A circuit • Dimmable 4 Lobbies 4 Columns 4 Directional Accents 4 Architectural Accents 20 • Mounts to a standard 4” x 4” junction box • Uses standard household RomexTM wire input/output • Powder coated die cast aluminum construction • 4 color options: White, Bronze, Aluminum, Black Suitable for • Wet Location National Specialty Lighting 2014 - 2015 LED Sconce Star Dimmable! Specifications Dimming Agency Approval Warranty 120VAC Both modules 120VAC, 95mA, 10.4 watts. One module 120VAC, 50mA, 5.2 watts. 3100K +/- 200K Replaceable 120VDC LED Module rated at 40,000 hours Powder coated white, black, aluminum and bronze Fixture is die cast aluminum for low fixture weight and corrosion protection. Junction box cover is stamped steel. Tempered glass 120VAC can be parallel wired (“daisy chained”) up to 75 fixtures maximum per circuit. Check local code and NEC for wiring selection. Dimmable with specified 120VAC dimmer. See instructions for details. UL Listed and labeled wet location. Wall mount only. Two years. See back cover for details. accessories fixture color options White ordering logic LSS-XX-YY Bronze Aluminum XX = LED COLOR YY = FIXTURE FINISH WW = Warm White WH = White BZ = Bronze One LED Module can be Unpowered Black Replaceable LED Module LEDMOD-32-FF BK = Black AL = Aluminum Schematics For applications requiring light in the up or down direction only. 43/8” 23/4” 93/8” 43/8” Both modules powered led products Voltage Fixture Energy Rating LED Color Temperature Average LED Module Life Fixture Finish Construction Lens Wiring Options 2 7/8” 3 1/4” One module powered Light Output Flexibility Each fixture has a narrow and a wide opening on opposite fixture ends. Fixtures are symmetrical and mounting can be accomplished with either opening pointing up or down. Photometrics on page 57 Narrow Opening 7/16” W x 1-5/8” H Wide Opening 1-3/16” W x 1-5/8” H 21 LED Step Star Dimmable! Prism Louver Louver Description Die cast aluminum wall mount LED step light fixture of only 5.2 watts. 72% energy savings vs. Xenon/Halogen technologies. Replaceable 120VDC LED Module included. Dimmable. 120VAC input and output of fixture up to 150 fixtures per 15A tap. UL listed Wet Location for all interior and exterior wall, ceiling, and concrete pour applications. Offered in three cover styles and four fixture finishes. Prism Schematics 4" 3 5/8" 5 3/16" 5 3/16" Louver, Prism Scoop 5 1/2" 2 1/2" 5 1/2" 1 1/2" 3 /4" 7 1/2" Features • Frosted glass lens • 120V Power Input • Low 5.2 watts per fixture energy usage • Up to 150 fixtures per 120VAC tap • Dimmable • • • • 22 120VDC replaceable LED Module No integral LED Driver required 120V push-in connectors included for ease of power input Numerous 1/2” NPT fittings for standard RomexTM wire input 2 1/2" 7 1/2" • Each fixture ships complete with can and cover • Die cast aluminum can and cover; suitable for concrete pour • 3 cover designs: Louver, Prism and Scoop • 4 cover color options: White, Bronze, Black or Aluminum Suitable for • Wet locations • Insulation contact • Wall and ceiling mount • Showers • Use in poured concrete National Specialty Lighting 2014 - 2015 LED Step Star Dimmable! Specifications Applications Lens Wiring Options Dimming Agency Approval Warranty 120VAC 120VAC, 43mA, 5.2 watts Replaceable 120VDC LED Module rated at 40,000 hours 3100K +/- 200K White, bronze, aluminum, black White with aluminum reflector Both cover and can are die cast aluminum for corrosion protection, strength, weight, and consistency of finish. Frosted tempered glass 120V can be parallel wired (“daisy chained”) up to 150 fixtures per tap. Check local code and NEC for wiring selection Dimmable with specified 120VAC dimmer. See instructions for details. UL listed Wet Location for all interior and exterior wall, ceiling, and concrete pour applications. Two years. See back cover for details. 4 Interior steps 4 Exterior steps 4 Aisles 4 Halls 4 Paths 4 Patio lighting 4 Entry lighting 4 Post lighting led products Voltage Fixture Energy Rating LED Module Life LED Color Temperature Cover Finish Can Finish Construction 4 Ceilings 4 Showers COver options Photometrics on page 56 Louver Cover Prism Cover Scoop Cover Bronze Black Aluminum Z = Fixture TYPE XX = LED Color YY = Fixture Finish COver color options White ordering logic LST-Z-XX-YY accessories L = Louver Cover S = Scoop Cover P = Prism Cover Concrete Cap - direct pour mounting! WH = White WH = White BZ = Bronze BK = Black AL = Aluminum Outside of Plywood Form Wing Nut Inside of Plywood Form Hex Head Bolt Washer Plywood Form Replaceable LED Module LEDMOD-32-FF SL-CC Step Star Concrete Cap Required for all concrete pour and brick wall applications Cover Bolt Concrete Cap Fixture Concrete Cap installed in fixture Assembly Schematic Flexible conduit All photos and illustrations © 2015 National Specialty Lighting 23 Concrete Cap LED Brick Star Dimmable! Prism Scoop Louver Description Die cast aluminum wall mount LED light fixture fits standard brick void and consumes only 5.2 watts.72% energy savings vs. Xenon/ Halogen technologies. Dimmable. 120VAC input and output of fixture up to 150 fixtures per 15A tap. Replaceable 120VDC LED Module included. UL listed Wet Location for all interior and exterior wall, ceiling and concrete pour applications. Offered in three cover styles and five fixture finishes, including Stainless Steel Louver Cover with fluorocarbon lacquer coated aluminum can. Schematics Scoop Louver, Prism 2 1/8" 2 3/8 " 3 1/8" 7 11/16" 7 11/16" 9" • Frosted glass lens • 120V Power Input • Low 5.2 watts per fixture energy usage • Up to 150 fixtures per 120VAC tap • Dimmable • • • • • 24 120VDC replaceable LED Module No integral LED Driver required Pleasingly warm color temperature of 3100K 120V push-in connectors included for ease of power input Numerous 1/2” NPT fittings for standard RomexTM wire input 3 1/8" 1 1/2" 3/4" Features Photometrics on page 56 7 1/2" 7 1/2" 9" • Each fixture ships complete with can and cover • Die cast aluminum can and cover; suitable for concrete pour • 3 cover designs: Louver, Prism and Scoop • 5 cover color options: White, Bronze, Black, Aluminum or Stainless Steel (Louver cover only) Suitable for • Wet locations • Insulation contact • Wall and ceiling mount • Showers • Use in poured concrete National Specialty Lighting 2014 - 2015 LED Brick Star Dimmable! Applications Voltage Fixture Energy Rating LED Module Life LED Color Temperature Cover Finish Can Finish Construction Lens Wiring Options Dimming Agency Approval Warranty 4 120VAC 120VAC, 43mA, 5.2 watts 4 Replaceable 120VDC LED Module rated at 40,000 hours 4 3100K +/- 200K 4 White, bronze, aluminum, black or stainless steel 4 White with aluminum reflector Both cover and can are die cast aluminum for corrosion protection, 4 strength, weight, and consistency of finish. New Stainless Steel Louver option. 4 Frosted tempered glass 4 120V can be parallel wired (“daisy chained”) up to 150 fixtures per tap. 4 Check local code and NEC for wiring selection 4 Dimmable with specified 120VAC dimmer. See instructions for details. UL listed wet location for all interior and exterior wall, ceiling 4 and concrete pour applications. Two years powder coated finish, 3 years stainless steel finish. See back cover for details. Brick walls Interior steps Exterior steps Aisles Halls Paths Patio lighting Entry lighting led products Specifications Post lighting Ceilings Showers COver options Louver Cover Stainless Steel Louver Cover Recommended for use in corrosive environments as salt air, adjacent bodies of water, or installed in caustic materials such as limestone. Three year warranty. Prism Cover Scoop Cover Bronze Black Aluminum Z = Fixture TYPE XX = LED Color YY = Fixture Finish COver color options White ordering logic LBR-Z-XX-YY accessories L = Louver Cover S = Scoop Cover P = Prism Cover WH = White Concrete Cap - direct pour mounting! WH = White BZ = Bronze BK = Black AL = Aluminum SS = Stainless Steel (Louver only) Outside of Plywood Form Wing Nut Inside of Plywood Form Hex Head Bolt Washer Plywood Form Replaceable LED Module LEDMOD-32-FF BL-CC Brick Star Concrete Cap Required for all concrete pour and brick wall applications Concrete Cap installed in fixture Cover Bolt Concrete Cap Fixture Assembly Schematic Flexible conduit All photos and illustrations © 2015 National Specialty Lighting 25 LED Wall Star Dimmable! Description Die cast aluminum surface or recessed mount LED light fixture of only 5.2 watts. Dimmable. 120VAC input and output of fixture up to 150 fixtures per 15A tap. Replaceable 120VDC LED module included. UL listed Wet Location. Offered in three cover styles and four fixture finishes. Schematics 51/58"1/8" 5 /8" 5 /8" 6 3/68"3/ 8" Cover Diameter 2 1/28"1/ 8" Mounting Hole Locations 2 1/22"1/2" 3 /4" 3 /4" 515/81"/8" 5 /58" /8" 6 63/ 83"/ 8" 2 12/21"/2" 2 12/ 81"/ 8" 5 "5 " 2 12/21"/2" 5 "5 " 1 11/21"/2" Recessed, White Prism Cover • Die cast aluminum cover and can. Corrosion resistant powder coating. Suitable for concrete pour. • Replaceable 120VDC LED Module • Pleasingly warm color temperature of 3100K • Dimmable 4 74/87"/8" Scoop Louver, Prism 3 /34" /4" Features 5 /58" /8" 4 74/87"/8" • Three cover designs: Louver, Prism and Scoop • Four cover color options: White, Black, Bronze or Aluminum • Mounting flange for recessed mounting • Can be surface mounted or recessed into any hole 5” diameter and 3” deep • LED Wall Star has “Knock-off” tabs for surface mounting 26 • Push-In 120V connectors (no wire nuts required) • Room for 120V interconnection • Numerous 120V 1/2” NPT fittings for standard RomexTM input Suitable for • Wet locations • Insulation contact • Wall mount • Showers • Use in poured concrete National Specialty Lighting 2014 - 2015 LED Wall Star Dimmable! Specifications Dimming Agency Approval Warranty 120VAC power input. 120VAC, 43mA, 5.2 watts Replaceable 120VDC LED Module rated at 40,000 hours 3100K +/- 200K Powder-coated white, black, bronze, or natural aluminum Powder-coated white with white reflector Both cover and can are die cast aluminum for corrosion protection, strength, weight, and consistency of finish Frosted glass 120V can be parallel wired (“daisy chained”) up to 150 fixtures per 15A tap. One wire between each fixture completes chain. No custom cord required. Check local code and NEC for wiring selection. Dimmable with specified 120VAC dimmer. See instructions for details. UL listed and labeled wet and IC locations. Wall or surface mount only. Suitable for concrete pour. Two years. See back cover for details. COver options led products Voltage Fixture Energy Rating LED Module Life LED Color Temperature Cover Finish Can Finish Construction Lens Wiring Options Photometrics on page 56 Applications 4 Interior steps 4 Exterior steps 4 Aisles 4 Halls 4 Paths 4 Patio lighting Scoop Louver Prism ordering logic Bronze Z = Cover Type LWS-Z-YY L = Louver Cover S = Scoop Cover P = Prism Cover mounting options Recessed 4 Post lighting 4 Showers fixture color options White 4 Entry lighting Black Aluminum YY = FIXTURE COLOR Note: WH = White BZ = Bronze BK = Black AL = Aluminum All fixtures have the flexibility to be recessed or surface mounted Accessories Surface mount All photos and illustrations © 2015 National Specialty Lighting Wall Star Concrete Cap WL-CC Required for all concrete pour and brick wall applications. Replaceable LED Module LEDMOD-32-FF 27 LED Disc Light Dimmable! NEW PRODUCT! Indoor step application Description LED Disc Light is a robust fixture suitable for in-ground, ceiling or wall mount applications. The 3 watt LED package delivers a surprising amount of light making it ideal as an up light for shrubs and small trees. Certified for wet burial applications, LED Disc Light makes an excellent paver light for public areas, decks, driveways and patios. Our concrete form makes concrete pour applications simple and fast. Applications 4 Steps 4 Aisles 4 Paths 4 Direction Lighting 4 Information Lighting 4 Decorative Lighting 4 Merchandising 4 Landscape Accents Features • Dimmable on the primary power supply side with our new Dimmable LED Drivers! • Long life – 50,000 hours • Low power consumption of 3 watts per fixture • Safe 12 volt, Class 2 power supply (not included) • Up to 18 fixtures per power supply • cUL listed for in-wall, in-floor, outdoor wet, and outdoor burial applications • Rugged 316L Stainless Steel construction 28 1.3" 34.0mm Ø 2.36" Ø 59.9mm 1.4" 35.0mm 1.0" 25.5mm 3.9" 99.0mm 1.95" 49.5mm • Fits in any 1.5” diameter hole, 4” long • No UV, no infrared, no radiated heat • No mercury National Specialty Lighting 2014 - 2015 393.7 ft. 120 m Total distance from LED Driver per lead Dimmable! Specifications Voltage Fixture Energy Rating LED Color Temperature LED Life Cover Finish Barrel Finish Lens Wiring Options Dimming Agency Approval Warranty LED Disc Light 370 ft. 112.7 m 328.0 ft. 100 m 247 ft. 75.1 m 262.5 ft. 80 m 154 ft. Photometrics 45.1 m on page 57 196.9 ft. 60 m 12VDC 131.2 ft. 3 Watts 40 m 185 ft. 56.3 m Warm White 2700K +/-200K, Cool White 5500K +/-200K 65.6 ft. Rated at 50,000 hours 20 m 316L Stainless Steel 0 316L Stainless Steel 10 15 20 25 Frosted or Clear Tempered Glass Number of LED Disc Lights per lead Fixtures can be parallel wired or “Daisy chained”together with up to 18 fixtures on our largest driver. NOTE: No more than 18 LED Disc Lights per LEDDR-12-60W. See adjacent driver chart for details. NOTE: Use LW-18G-CL2 for all in-wall applications. Use LW-18G-BUR for all burial applications. See instructions for details. cUL listed and labeled for wet, IC, ceiling, wall and direct burial applications. See back cover for details. LED Color options 123 ft. 37.5 m 30 ordering logic LEDD-Y-XX Warm White LE 2700K Y = Tempered GLASS XX = COLOR OF LED F = Frosted C = Clear WH = White WW = Warm White Cool White LED 5500K With every foot of lead wire and every light fixture, there is voltage loss. With too much voltage loss all light fixtures will not develop 100% of their potential output. To the right is a chart of acceptable voltage loss which will maintain 100% of the potential light output of the LED Disc Light. Simply plot the number of LED Disc Light you wish to place on one lead on the horizontal axis, with the total distance from the LED Driver to the last LED Disc Light on the vertical axis. If the resulting plot is at or below the line shown, you will have acceptable voltage loss and your LED Disc Light will output 100% of their potential. Total distance from LED Driver per lead 787.4 ft./240 m 100% LED Light Output Chart 740 ft. 225 m 721.8 ft./220 m 656.2 ft./200 m 590.5 ft./180 m 524.9 ft./160 m 459.3 ft./140 m 370 ft. 112.7 m 393.7 ft./120 m 328.0 ft./100 m 247 ft. 75.1 m 262.5 ft./80 m 131.2 ft./40 m 5 10 20 NOTE: No more than 18 LED Disc Lights per LEDDR-12-60W. Accessories Dimmable TR12L20DC TR12L40DC TR12L60DC LEDDR-12-60W Outdoor driver Max. 18 LED Disc Lights 60W hardwire Input: 100 - 240V AC Output: 12V DC See page 58 for details 15 Number of LED Disc Lights per lead LED driver options NON Dimmable 185 ft. 56.3 m 196.9 ft./60 m Min. # of Fixtures 3 6 10 Max. # of Fixtures 6 12 18 LEDD-CF LED Disc Light concrete form for concrete pour applications Input: 120V AC Output: 12V DC See page 58 for details 29 LED MiniDisc Light Dimmable! c LED MiniDisc Lights can be used as safety or “caution” lighting on steps and ledges in Amber LED MiniDisc Lights in illumination applications in Cool White LED MiniDisc Lights used to highlight architectural accents in Warm White Stainless Steel MiniDisc Light in Warm White Description Die cast aluminum, or stainless steel, recessed mini LED accent fixture with prism cover design. Low .24Watts LED provides 80% energy savings vs. Xenon/Halogen technology. Dimmable. Fixture circuitry allows expandable system design from 1 to 100 fixtures per appropriate Class 2 LED driver. ETL listed for in-wall, in-floor, outdoor wet and outdoor burial applications. Offered in six LED colors and five fixture finishes. 5/32" Schematics 1" Applications 7/8" 2" 4 4 4 4 Steps Aisles Paths Direction Lighting 4 4 4 4 Information Lighting Decorative Lighting Merchandising Landscape Accents 31/4" Cover Features • Safe 12 volt, Class 2 power supply (remote) • Up to 200 fixtures per power supply • Dimmable • Rugged 316L Stainless Steel construction for harsh environments • Aluminum construction standard 30 Strain Relief Barrel LED Module • Fits in any 1” diameter hole, 3-1/2” long LED Module • Low energy requirements of .24Watts per fixture • 6 LED colors: Warm White, Cool White, Green, Blue, Red, Amber Mounting Screws 5 Fixture Finishes: Aluminum, Black, White, Bronze or Stainless Steel (Prism cover only) c Suitable for • In wall applications • In floor applications • Outdoor wet locations • Outdoor burial locations National Specialty Lighting 2014 - 2015 LED MiniDisc Light Dimmable! Photometrics on page 57 Specifications Voltage Fixture Energy Rating LED Color Temperature LED Life LED Colors Cover Finish Barrel Finish Construction Lens Wiring Options Dimming Agency Approval Warranty 12VDC 12VDC, 20mA, .24Watts Warm White 2900K +/-200K, Cool White 5400K +/-200K Rated at 40,000 hours Warm White, Cool White, Green, Blue, Red, Amber Aluminum, White, Bronze, Black, Optional 316L Stainless Steel Aluminum, White, Bronze, Black, Optional 316L Stainless Steel Both cover and barrel are die cast aluminum for corrosion protection, strength, weight, and consistency of finish. Frosted Tempered Glass Up to 100 MiniDisc Lights per LED Driver by parallel wiring (“daisy chain”) between fixtures. One wire completes chain. No custom cord required. NOTE: Use LW-18G-CL2 for all in-wall applications. Use LW-18G-BUR for all outdoor and burial applications. Dimmable with appropriate LED Magnetic Power Supply and dimmer. See instructions for details. ETL listed and labeled for wet, IC, ceiling, and direct burial applications. Two years aluminum or powder coated finish, 3 years stainless steel finish. See back cover for details. LED Color options Warm White LED Cool White LED Green LED Blue LED Amber LED Red LED Cover finish options Powder Coat - Aluminum Powder Coat - Bronze ordering logic Powder Coat - Black Powder Coat - White XX = LED COLOR WW = Warm White CW = Cool White BL = Blue LEDMD-XX-YY accessories Wiring and LED drivers Stainless Steel Recommended for use in corrosive environments as salt air, adjacent bodies of water, or installed in caustic materials such as limestone. Three year warranty. YY = FIXTURE FINISH GR = Green AM = Amber RD = Red AL = Aluminum BZ = Bronze WH = White LED driver options NON Dimmable Dimmable TR12L20DC TR12L40DC TR12L60DC Outdoor Lead Wire LW-18G-BUR For all burial applications. Required to assure water tight connection in fixture strain relief guard. Indoor Lead Wire LW-18G-CL2 For all in-wall applications BK = Black SS = 316L Stainless Steel LEDDR-12-60W 12VDC, 60W, Class 2 10.25” x 3”x 2” 1-100 fixtures See page 58 for details. Min. # of Fixtures 4 30 50 Max. # of Fixtures 64 120 200 12VDC, 20-60W, Class 2 5.6” x 2” x 2.14” or 6.55” x 2.25” x 2.55” See page 58 for details. Concrete Form - Available for concrete pour and brick/stone applications LED MiniDisc Concrete Form LEDMD-CF 5.25”H x 2”DIA Concrete form, before LED MiniDisc is installed Concrete form, after LED MiniDisc is installed and operating Concrete form fits over most 1/2” conduit junction boxes for easy wire installation/removal 31 led products c LED MiniDisc Scoop Light Dimmable! c LED MiniDisc Scoop Light in Amber LED MiniDisc Scoop Light in Cool White Description Die cast aluminum recessed mini LED accent fixture with scoop cover design. Low .24Watts LED provides 80% energy savings vs. Xenon/Halogen technology. Dimmable. Fixture circuitry allows expandable system design from 1 to 100 fixtures per appropriate Class 2 LED driver. ETL listed for in-wall, in-floor, outdoor wet and outdoor burial applications. Offered in six LED colors and four fixture finishes. Applications 4 4 4 4 Steps Aisles Paths Direction Lighting Schematics 4 Decorative Lighting 4 Merchandising 4 Landscape Accents 5/32" 1" 7/8" 2" 1/ 2" 33/4" Cover Features Strain Relief Barrel Mounting Screws 4 powder coated cover colors: Aluminum, Black, White, Bronze LED Module • Safe 12 volt, Class 2 power supply (remote) • Up to 200 fixtures per power supply • Dimmable • Fits in any 1” diameter hole, 3-1/2” long LED Module • Low energy requirements of .24Watts per fixture • 6 LED colors: Warm White, Cool White, Green, Blue, Red, Amber 32 c Suitable for • In wall applications • In floor applications • Outdoor wet locations • Outdoor burial locations National Specialty Lighting 2014 - 2015 LED MiniDisc Scoop Light Dimmable! Photometrics on page 57 Specifications Voltage Fixture Energy Rating LED Color Temperature LED Life LED Colors Cover Finish Barrel Finish Construction Lens Wiring Options Dimming Agency Approval Warranty 12VDC 12VDC, 20mA, .24Watts Warm White 2900K +/-200K, Cool White 5400K +/-200K Rated at 40,000 hours Warm White, Cool White, Green, Blue, Red, Amber Aluminum, White, Bronze, Black Aluminum, White, Bronze, Black Both cover and barrel are die cast aluminum for corrosion protection, strength, weight, and consistency of finish. Frosted Tempered Glass Up to 100 MiniDisc Lights per LED Driver by parallel wiring (“daisy chain”) between fixtures. One wire completes chain. No custom cord required. NOTE: Use LW-18G-CL2 for all in-wall applications. Use LW-18G-BUR for all outdoor and burial applications. Dimmable with appropriate LED Magnetic Power Supply and dimmer. See instructions for details. ETL listed and labeled for wet, IC, ceiling, and direct burial applications. Two years. See back cover for details. LED Color options Warm White LED Cool White LED Green LED Blue LED Amber LED Red LED Cover finish options Powder Coat - Aluminum Powder Coat - Bronze ordering logic Powder Coat - White Powder Coat - Black XX = LED COLOR WW = Warm White CW = Cool White BL = Blue LEDMDS-XX-YY accessories Wiring and LED drivers YY = FIXTURE FINISH GR = Green AM = Amber RD = Red AL = Aluminum BZ = Bronze LED driver options NON Dimmable Dimmable TR12L20DC TR12L40DC TR12L60DC Outdoor Lead Wire LW-18G-BUR For all burial applications. Required to assure water tight connection in fixture strain relief guard. Indoor Lead Wire LW-18G-CL2 For all in-wall applications WH = White BK = Black LEDDR-12-60W 12VDC, 60W, Class 2 10.25”L x 3”W x 2”H 1-100 fixtures See page 58 for details. Min. # of Fixtures 4 30 50 Max. # of Fixtures 64 120 200 12VDC, 20-60W, Class 2 5.6” x 2” x 2.14” or 6.55” x 2.25” x 2.55” See page 58 for details. Concrete Form - Available for concrete pour and brick/stone applications LED MiniDisc Concrete Form LEDMD-CF 5.25”H x 2”DIA Concrete form, before LED MiniDisc is installed All photos and illustrations © 2015 National Specialty Lighting Concrete form, after LED MiniDisc is installed and operating Concrete form fits over most 1/2” conduit junction boxes for easy wire installation/removal 33 led products c LED Surface Star Dimmable! 36 LED Surface Star Lights in Trellis Application Description Die cast aluminum 1.2 watt surface mounted mini LED accent fixture. 80% energy savings vs. Xenon/Halogen technology. Dimmable. Fixture circuitry allows expandable system design from 1 to 45 fixtures per appropriate LED driver with Class 2 safety and ‘plug-and-play’ pre-molded extension cords. ETL listed Wet Location. Offered in five LED colors and four fixture finishes. Side Applications 4 4 4 4 4 4 4 4 4 Handrails Cabinets Decks Gazebos Trellis Posts Architectural Accents Landscape Accents Merchandising Schematics Side 1 1/8 ” 1 1/8 ” 12” 12” Bottom Bottom Bottom 2 1/4 ” 2 1/4 ” • 5 LED Colors: White, Green, Blue, Red, Amber Features • Safe 12 volt, Class 2 power supply (remote) • Up to 45 fixtures per LED Driver • Easy wiring with pre-molded extension cords • 4 Fixture finishes: White, Bronze, Aluminum, Black • Low 1.2W energy usage • Compact 1.5” diameter by 1.125” high design 34 Side 1 1/2 ” 1 1/2 ” Suitable for • Indoor and Outdoor applications National Specialty Lighting 2014 - 2015 LED Surface Star Dimmable! Photometrics on page 57 Specifications Voltage Fixture Energy Rating LED Color Temperature LED Life LED Colors Finish Construction Lens Wiring Options Dimming Agency Approval Warranty led products 12VDC 12VDC, 100mA, 1.2 watts 3800K +/-200K Rated at 40,000 hours White, Green, Blue, Red, Amber White, Bronze, Aluminum, Black Die cast aluminum for corrosion protection, strength, weight, and consistency of finish. Clear Tempered Glass Up to 45 LED Surface Stars per LED Driver. Dimmable with appropriate LED Magnetic Power Supply and dimmer. See instructions for details. ETL listed and labeled for surface mounted wall, ceiling, cabinet, under-cabinet, and wet locations. Two years. See back cover for details. LED Color options White LED Green LED Blue LED Red LED Aluminum finish Black finish Amber LED Fixture finish options White finish ordering logic LEDSS-XX-YY Bronze finish XX = LED COLOR WH = White GR = Green BL = Blue accessories YY = FIXTURE FINISH RD = Red AM = Amber WH = White BZ = Bronze BK = Black AL = Aluminum LED driver options NON Dimmable Dimmable TR12L20DC TR12L40DC TR12L60DC Extension Cords Use between LED Driver and first fixture, or fixture-to-fixture. Available in three colors and seven lengths. See price list for model numbers. Wire Screw Clips WSC-004 (30 per bag) All photos and illustrations © 2015 National Specialty Lighting LEDDR-12-60W 12VDC, 60W, Class 2 10.25”L x 3”W x 2”H 1-45 fixtures See page 58 for details. Min. # of Fixtures 7 13 23 Max. # of Fixtures 14 25 45 12VDC, 20-60W, Class 2 5.6” x 2” x 2.14” or 6.55” x 2.25” x 2.55” See page 58 for details. 35 LED Brite StripTM Dimmable! Applications 4 Ceiling coves 4 Wall coves 4 Display cases 4 Under cabinet lighting LED Brite Strip festoon bulb in a cove 4 Shelf lighting 4 Sign backlighting 4 Architectural accents 4 Decorative accents Description Flexible light strip featuring LED efficiency and field cutability. Molded festoon bulb sockets located at two, three and four bulbs per foot on listed 12AWG wire. Each socket accepts a 0.5 watt LED festoon bulb. Bulbs are rated at 40,000 hour life. Light strip is dimmable with 0.5 watt festoon bulbs powered by appropriate LED driver and dimming device. See instructions for complete specifications and installation details. Schematics " 7/16/16 " 7 3/4" Top 3/4" Top 3/4" 3/4" 15/16" Side 15/16" 15/16" 1Side 115/16" Features Fixture Design • Field cutable power strip for custom, hard to estimate applications • Flexible design allows unlimited applications • Parallel wiring means loss of a bulb does not affect remaining strip • Listed 12 AWG wire • Simple, safe, effective standard terminal block connector with Junction Box Mounting • Each socket ships complete with 3M double-sided mounting tape • Optional nail clips for difficult mounting applications Suitable for • Indoor dry locations Socket • Pre-installed on wire for installation ease • “Snap In” bulb socket design for ease of bulb replacement 36 Bulb • Low 0.5 watts per LED festoon bulb • Rated 40,000 hour LED life • Festoon bulbs dim with appropriate LED driver and dimmer. See instructions. National Specialty Lighting 2014 - 2015 LED Brite StripTM Dimmable! Specifications Socket Connection Wire and Socket Color Maximum Single Run Dimming Agency Approval Warranty 24VDC 0.5W LED Festoon (dimmable) Warm White 2600K +/-200K, Cool White 6000K +/-200K Replaceable LED bulbs rated at 40,000 hours 1” between bulb sockets (4 bulbs per foot) 2” between bulb sockets (3 bulbs per foot) 4” between bulb sockets (2 bulbs per foot) Horizontal individual sockets parallel wired to flat 12AWG power wire. White or black LED Festoon Bulbs: 180 bulbs with LEDDR-24-120W non-dimmable driver, or 160 bulbs with TR24L96DC dimmable magnetic transformer. 0.5W LED Festoon bulbs are dimmable with appropriate magnetic LED driver and dimmer. See instructions for details. ETL listed for indoor and other dry location use Two years. See back cover for details. color options Black/White ordering logic LBL-Z-XX/YY led products Voltage LED Bulb Specifications LED Color Temperature LED Bulb Life Socket Spacing Photometrics on page 55 Purchase options 2, 3, 4 Bulbs/Foot Custom Cuts 100 ft. Spools Z = Bulb Spacing XX = STRIP LENGTH YY = Light Strip Color 2 = 2 bulbs/foot 3 = 3 bulbs/foot 4 = 4 bulbs/foot Custom Length or 100 = 100 foot spool WH = White BK = Black Note: When ordering cut lengths, orders are rounded to the nearest foot LED bulbS LED driver options NON Dimmable Dimmable TR24L20DC TR24L40DC TR24L60DC TR24L96DC LED Festoon Bulb LBL-24-.5WW LBL-24-.5CW (dimmable) LEDDR-24-120W 24VDC, 120W, Class 2 11.6”x 3.6”x 2.25” 1-180 Bulbs See page 58 for details. Min. # of Bulbs 16 30 50 80 Max. # of Bulbs 32 60 100 160 24VDC, 20-96W, Class 2 5.6” x 2” x 2.14” or 6.55” x 2.25” x 2.55” See page 58 for details. Accessories Note: For mounting options see page 28. Assembly Kit (Required to ship with every cut) BL-001/WH White BL-001/BK Black Includes: Junction Box, Terminal Block and End cap 2.2”L x 1.8”W x 1”H End Caps BL-003/WH BL-003/BK Lead Wire LW-12G/WH LW-12G/BK 37 LED Brite StripTM / Brite StripTM Dimmable! mounting options Double Sided Tape on every socket Nail Clips BL-005/BK Black BL-005/WH White 12 Gauge Wire Brite Strip Reflector BLF-4-BA, BLF-4-PB, BLF-4-GW, BLF-4-GB. Sold in 4’ lengths only. Custom cutting for pieces less than 4’ available. Cove Reflector BLCOVE-4-GW Sold in 4’ lengths only. Custom cutting for pieces less than 4’ available Brite Strip Fascia BLFAS-4-BA, BLFAS-4-GW Sold in 4’ lengths only. Custom cutting for pieces less than 4’ available. Brite Strip™ Fascia Extrusion Features 4 Custom profile shields bulb glare while reflecting light toward work surface. Provides proper spacing between Brite Strip bulb and Fascia surface. 13/16" 1" 1/4" 4 Can be used as an accessory with LED eStrip. 11/16" BLFAS-4-XX 4 Sold in two colors: Aluminum and White 4 Aluminum offers the greatest reflectivity. Applications 4 Cabinets 4 White acts like a primer to allow on-site custom paint matching with hi-temp paint. 4 Displays 4 Work Stations 4 3M double sided tape included with every section. 4 Shelves 4 Linear Task Lighting 4 Sold in 4 foot lengths only. Custom cuts for pieces less than 4 feet available. Cove Reflector Brite Strip in Cove Reflector (Floor View) Features 13/8" 4 An aluminum extrusion in the shape of a standard cove molding, with a white gloss mounting area for the illumination system. 4 Can be used as an accessory with LED eStrip. 2 3/4" 13/4" 4 Pre-engineered with appropriate bulb side clearances. 4 Pre-primed in white for ease of wall match painting, and interior reflective qualities. BLCOVE-4-GW 4 Cove reflector can be used with Brite Strip or LED eStrip. 4 Sold in 4 foot lengths only. Custom cutting for pieces less than 4 feet available. 38 National Specialty Lighting 2014 - 2015 Brite StripTM Dimmable! Description Schematics 7/16" 3/4" 7/16" 3/4" Top 4 Ceiling coves 4 Wall coves 4 Display cases 4 Under cabinet lighting 4 Shelf lighting 4 Sign backlighting 4 Architectural accents 4 Decorative accents Top 3/4" 3/4" 15/16" 15/16" Side Side /16" 115 115/16" 18' 14' 14' 110V 18' TR-24-960 Transformer If you wish to do cove lighting around an 18’ x 14’ room, the efficient way to illuminate this area would be utilizing a 24V system (3 bulbs per foot) and 5 watt, possibly frosted bulbs. This would require 2 runs with only one TR-24-960 in the middle. All photos and illustrations © 2015 National Specialty Lighting Features Fixture Design • Field cutable power strip for custom, hard to estimate applications • Flexible design allows unlimited applications • Parallel wiring means loss of a bulb does not affect remaining strip • Listed 12 AWG wire • Simple, safe, effective standard terminal block connector Socket • Pre-installed on wire for installation ease • “Snap In” bulb socket design for ease of bulb replacement Mounting • Each socket ships complete with 3M sided double-mounting tape • Optional nail clips for difficult mounting applications • Fascia extrusion • Reflectors boost light output 50% at 16” cabinet-to-counter dimension Bulb • 5 watt or 10 watt festoon • Incandescent or Xenon • Clear or frosted • 12V or 24V • 20 watt MR-11s in 12V or 24V 39 incandescent Applications xenon products Flexible light strip featuring field cutability and Xenon festoon, Incandescent festoon, and Halogen MR-11 bulb options. Molded festoon bulb sockets located at two, three and four bulbs per foot on listed 12AWG wire. All festoon bulbs are offered in either clear or frosted options. Xenon bulbs are rated at a 10,000 avg. bulb life. Light strip is dimmable with any bulb mentioned above and appropriate dimming device. See instructions for complete specifications and installation details. Brite StripTM Dimmable! Specifications Voltage 12V or 24V “Festoon” bulbs, and 12V or 24V MR11 Bulbs. Use “TR“or “TECLT” transformers. See instructions. Bulb Specifications 5 watt and 10 watt Festoon incandescent or “Xenon” bulbs (12V or 24V), 20 watt MR11 bulbs (12V or 24V) Average Bulb Life 10,000 hours (festoon); 2,500 hours (MR11) Bulb Spacing 1” between bulb sockets (4 bulbs per foot) 2” between bulb sockets (3 bulbs per foot) 4” between bulb sockets (2 bulbs per foot) Bulb Color Clear or frosted (All types and voltages of festoon bulbs. Clear only for MR-11). Bulb Connection Horizontal individual sockets parallel wired to flat power wire Wire and Socket Color White or Black Maximum Single Run A maximum total of: 480 watts on a 24 volt system or 240 watts on a 12 volt system Dimming Dimmable. See instructions. Agency Approval ETL listed for indoor and other dry location use. Requires a listed. Photometrics transformer with secondary circuit protection not to exceed 20 amps. on page 54 Warranty One year. See back cover for details. color options Black/white Purchase options 2, 3, 4 Bulbs/Foot Custom Cuts 100 ft. Spools Z = Bulb Spacing XX = STRIP LENGTH YY = Light Strip Color ordering logic LBL-Z-XX/YY 2 = 2 bulbs/foot 3 = 3 bulbs/foot 4 = 4 bulbs/foot Custom Length or 100 = 100 foot spool WH = White BK = Black Note: When ordering cut lengths, orders are rounded to the nearest foot Transformers bulb options Brite Strip bulbs See price list for product codes 20W MR-11 Bulbs HMT-12-20W HMT-24-20W Use “TR” or “TECLT” transformers See page 51 and instructions for transformer specification and installation details. accessories Note: For mounting options see page 28. Connector Assembly Kit BL-001/WH, BL-001/BK (Required to ship with every cut) Includes Juction Box, Terminal Block and End Cap. 2.2”L x 1.8”W x 1”H 40 End Caps BL-003/BK BL-003/WH BL-ADT Adapter HMT-12-20W (12V MR11 Bulb) HMT-24-20W (24V MR11 bulb) National Specialty Lighting 2014 - 2015 Xenon Task Light Dimmable! White 4-bulb Fixture Black 3-bulb Fixture xenon products Bronze Prism Cover Aluminum 3-bulb Fixture Bronze 4-bulb Fixture Description Completely self-contained under counter light fixture with 10,000 hour " average bulb life Xenon4.625 bulbs included. 120VAC in and out up to 66 bulbs. Numerous contractor preferred 1/2” knockouts in each fixture. Offered in five sizes and four fixture finishes. UL Listed Damp Location. 11/2" 1/2" Knockout 11/4" Schematics 4.625" 4.625" 11/2" 1/2" Knockout All photos and illustrations © 2015 National Specialty Lighting 11/4" 9” XTL-1-XX/YY One Bulb Xenon Task Light 17.5” XTL-2-XX/YY Two Bulb Xenon Task Light 26” XTL-3-XX/YY Three Bulb Xenon Task Light 34.5” XTL-4-XX/YY Four Bulb Xenon Task Light 38.5” XTL-5-XX/YY Five Bulb Xenon Task Light 41 Xenon Task Light Dimmable! Specifications Voltage Bulb Specifications Average Bulb Life Color Temperature Fixture Finish Construction Lens Wiring Options Dimming Agency Approval Warranty 120VAC input to fixture via hardwire or power cord. Integral 12V transformer per fixture 18W wedge base Xenon (1-,2-, 3-, 4- or 5-bulb fixtures) 10,000 hours 2800K +/-200K White or black powder coating; bronze anodized, or natural aluminum Aluminum extruded frame with injection molded sides for weight efficiency and consistency of finish Frosted glass. Hinged to aluminum frame. Hardwire or power cord options. Hardwire option can be parallel wired (“daisy chained”) up to 1188 watts (66 bulbs). One wire between each fixture completes chain. No custom cord required. Check local code and NEC. Hi/Lo switch per fixture, or dims with standard electronic low voltage dimmer on primary. UL listed and labeled. Damp Location. One year. See back cover for details. Features Xenon Bulbs • 10,000-hour average bulb life • Four times the bulb life of Halogen • Burns significantly cooler than Halogen • No harmful UV rays • Safer, low pressure bulbs • Replacement lamps half the cost of 120V Halogen • Dimmable • White reflectors in all 6 color options • Captive Mounting Screw • Power Cord Option • Frosted glass diffuser with simple hinged push-to-open lens requires no tools to relamp • Numerous 1/2” knock-outs on sides and back make it easy to install 120V hard wire • Integral hi-lo dimmer switch • Push-in connectors included for ease of power input • Integral 12V electronic transformer in each fixture. Plus 120VAC input/output allows fixtures to be daisy chained up to 66 bulbs per 15A tap. • Lightweight extruded aluminum frame for consistent finish. Available in 4 colors and 5 fixture lengths. CORD POWERTION OP t with sk Ligh . Xenon Ta cord installed r e w 5' po 4 1, 2, 3, 42 Suitable for Damp locations units & 5-bulb National Specialty Lighting 2014 - 2015 Xenon Task Light Dimmable! Wiring options Applications Hardwire (HW) Power Cord (PC) 120V RomexTM Wiring from wall direct to Xenon Task light Xenon Task light has 60” of lamp cord. Plugs into 120V receptacle 4 Under-cabinet task light 4 Work stations 4 Over-cabinet accent light 4 Laboratories 4 Display cases and exhibits 4 Merchandising 4 Indirect accent light 4 Wall units and bars Photometrics on page 54 Fixture Length options 2-Bulb unit 17.5” 3-Bulb unit 26” 4-Bulb unit 34.5” Black Aluminum 5-Bulb unit 38.5” xenon products 1-Bulb unit 9” Fixture color options White Bronze ordering logic XTL-Z-XX/YY Accessories Replacement Bulb XEN-12-18W Clear Z = Number of Bulbs 1, 2, 3, 4, 5 XX = Type HW = Hard Wire PC = Power Cord YY = Fixture Finish WH = White BZ = Bronze AL = Aluminum BK = Black Installation and Operational Features Easy-to-use hinged lens design All photos and illustrations © 2015 National Specialty Lighting Push-in connector Captive Mounting Screw 43 Xenon Step Light Dimmable! Aluminum Scoop Cover Bronze Prism Cover Description Die cast aluminum wall mount Xenon step light fixture of 18 watts. 120VAC input and output of fixture up to 66 fixtures per 15A tap. 10,000 hour average Xenon bulb life of 2800K color temperature. UL listed Wet Location for all interior and exterior wall, ceiling, and concrete pour applications. Dimmable with a low voltage electronic dimmer. Offered in three cover styles and four fixture finishes. Schematics 4" 3 5/8" White Louver Cover 5 3/16" 5 3/16" Louver, Prism Scoop 5 1/2" 2 1/2" 2 1/2" 5 1/2" 1 1/2" 3 /4" 7 1/2" 7 1/2" • Die cast aluminum can and cover • Corrosion resistant • Suitable for concrete pour • 3 cover designs: Louver, Prism and Scoop • 4 cover color options: White, Bronze, Black, Aluminum Features Xenon Bulbs • Four times the bulb life of Halogen at 1/2 the cost of 120V Halogen • Burns significantly cooler than Halogen • No harmful UV rays • Safer, low pressure bulbs • 18 watts • Dimmable • Wide mounting flange works well even in dry­wall-only housing holes • Ample room for 120V interconnection • Push-In 120V connectors (no wire nuts required) • Numerous 120V 1/2” NPT fittings for standard RomexTM input 44 Suitable for • Wet locations • Insulation contact • Wall and ceiling mount • Showers • Use in poured concrete National Specialty Lighting 2014 - 2015 Xenon Step Light Dimmable! Specifications Dimming Agency Approval Warranty 120VAC power input. Integral Class 2 12V transformer per fixture. 120VAC, 150mA, 18 watts 10,000 hours 2800K +/- 200K White, bronze, aluminum, black White with white reflector Both cover and can are die cast aluminum for corrosion protection, strength, weight, and consistency of finish. Frosted tempered glass 120V can be parallel wired (“daisy chained”) up to 66 fixtures per tap. Check local code and NEC for wiring selection Dimmable with an electronic low voltage dimmer on primary. UL listed Wet Location for all interior and exterior wall, ceiling, and concrete pour applications. One year. See back cover for details. 4 Interior steps 4 Exterior steps 4 Aisles 4 Halls 4 Paths 4 Patio lighting 4 Entry lighting 4 Post lighting 4 Ceilings 4 Showers Photometrics on page 56 COver options Louver Cover Applications Prism Cover Scoop Cover Bronze Black Z = Fixture TYPE YY = Fixture Finish L = Louver Cover S = Scoop Cover P = Prism Cover WH = White BZ = Bronze BK = Black AL = Aluminum xenon products Voltage Fixture Energy Rating Average Bulb Life Color Temperature Cover Finish Can Finish Construction Lens Wiring Options COver color options White ordering logic XSL-Z-YY Accessories Concrete Cap - Required for direct pour mounting! Aluminum Outside of Plywood Form Wing Nut Inside of Plywood Form Hex Head Bolt Washer Plywood Form Cover Bolt Concrete Cap Fixture SL-CC Step Light Concrete Cap Required for all concrete pour and brick wall applications Concrete Cap installed in fixture Assembly Schematic Flexible conduit 45 All photos and illustrations © 2015 National Specialty Lighting Concrete Cap Xenon Brick Light Dimmable! White Prism Cover Aluminum Scoop Cover Bronze Louver Cover Description Die cast aluminum wall mount Xenon light fixture fits standard brick void and consumes 18 watts. 120VAC input and output of fixture up to 66 fixtures per 15A tap. 10,000 hour average Xenon bulb life of 2800K color temperature. Offered in three cover styles and five fixture finishes. UL listed Wet Location for all interior and exterior wall, ceilings and concrete pour applications. Dimmable with a low voltage electronic dimmer. Schematics 2 1/8" 7 1/2" 7 1/2" Louver, Prism 2 3/8 " Scoop 3 1/8" 7 11/16" 7 11/16" 9" 9" Features • Stainless Steel Louver option • • • • • Die cast aluminum can and cover Fits standard brick void Corrosion resistant Suitable for concrete pour 3 cover designs: Louver, Prism and Scoop • 5 cover color options: White, Bronze, Black, Aluminum or Stainless Steel (Louver cover only) • Numerous 120V NPT fittings for standard RomexTM input • Push-In 120V connectors (no wire nuts required) • Numerous 120V 1/2” NPT fittings for standard RomexTM input 46 3 1/8" 1 1/2" 3/4" Xenon Bulbs • Four times the bulb life of Halogen at 1/2 the cost of 120V Halogen • Burns significantly cooler than Halogen • No harmful UV rays • Safer, low pressure bulbs • 18 watts • Dimmable Photometrics on page 56 • Ample room for 120V interconnection Suitable for • Wet locations • Insulation contact • Wall and ceiling mount • Showers • Use in poured concrete National Specialty Lighting 2014 - 2015 Xenon Brick Light Dimmable! Specifications Voltage Fixture Energy Rating Average Bulb Life Color Temperature Cover Finish Can Finish Construction Lens Wiring Options Dimming Agency Approval Warranty 120VAC power input. Integral Class 2 12V transformer per fixture. 120VAC, 150mA, 18 watts 10,000 hours 2800K +/- 200K White, bronze, aluminum, black, stainless steel louver option White with white reflector, fluorocarbon lacquer on stainless steel option Both cover and can are die cast aluminum for corrosion protection, strength, weight, and consistency of finish. New stainless steel louver option! Frosted tempered glass 120V can be parallel wired (“daisy chained”) up to 66 fixtures per 15A tap. Check local code and NEC for wiring selection Dimmable with an electronic low voltage dimmer on primary. UL listed Wet Location for all interior and exterior wall, ceiling and concrete pour applications. One year. See back cover for details. Applications 4 Brick walls 4 Interior steps 4 Exterior steps 4 Aisles 4 Halls 4 Paths 4 Patio lighting 4 Entry lighting 4 Post lighting 4 Ceilings 4 Showers COver options Prism Cover Scoop Cover Bronze Black Z = COVER TYPE YY = COVER COLOR/FINISH L = Louver Cover S = Scoop Cover P = Prism Cover WH = White BZ = Bronze xenon products Louver Cover Stainless Steel Louver Cover Recommended for use in corrosive environments as salt air, adjacent bodies of water, or installed in caustic materials such as limestone. COver color options White ordering logic XBL-Z-YY Aluminum BK = Black AL = Aluminum SS = Stainless Steel (Louver cover only) Accessories Concrete Cap - Required for direct pour mounting! Outside of Plywood Form Wing Nut Inside of Plywood Form Hex Head Bolt Washer Plywood Form Cover Bolt Concrete Cap Fixture BL-CC Brick Light Concrete Cap Required for all concrete pour and brick wall applications Concrete Cap installed in fixture Assembly Schematic Flexible conduit 47 All photos and illustrations © 2015 National Specialty Lighting Concrete Cap Xenon Wall Light Dimmable! Description Die cast aluminum surface or recessed mount Xenon light fixture of 18 watts. Dimmable. 120VAC input and output of fixture up to 66 fixtures per 15A tap. UL listed Wet Location. Offered in three cover styles and four fixture finishes. Schematics 551/18/"8" 5 /58/"8" Bronze Scoop Cover 663/38/"8" Aluminum Prism Cover 221/18/"8" Cover Diameter Mounting Hole Locations 51/85"1/8" 5 /8"5 /8" 6 3/68"3/ 8" 2 1/22"1/2" 2 1/28"1/ 8" Recessed or Surface Mount Features Xenon Bulbs • Four times the bulb life of Halogen at 1/2 the cost of 120V Halogen • Burns significantly cooler than Halogen • No harmful UV rays • Safer, low pressure bulbs • 18 watts • Dimmable White Louver Cover 5 /8"5 /8" 4 7/84"7/8" 4 7/48"7/8" Scoop Louver, Prism 2 1/22"1/2" 5"5" 3 /4"3 /4" 5"5" 1 1/21"1/2" • Die cast aluminum cover and can. Corrosion resistant. Suitable for concrete pour • Three cover designs: Louver, Prism and Scoop • Four cover color options: White, Black, Bronze or Aluminum • Mounting flange for recessed mounting • Can be surface mounted or recessed into any hole 5” diameter and 3” deep • Xenon Wall light has “Knock-off” tabs for surface mounting 48 • Push-In 120V connectors (no wire nuts required) • Numerous 120V 1/2” NPT fittings for standard RomexTM input Suitable for • Wet locations • Insulation contact • Wall mount • Showers • Use in poured concrete National Specialty Lighting 2014 - 2015 221/12/"2" 3 /34/"4" Xenon Wall Light Dimmable! Specifications Voltage Fixture Energy Rating Average Bulb Life Color Temperature Cover Finish Can Finish Construction Lens Wiring Options Dimming Agency Approval Warranty Photometrics on page 56 120VAC power input. Integral Class 2 12V transformer per fixture 120VAC, 170mA, 18 watts 10,000 hours 2800K +/-200K White, black, bronze, or aluminum White with white reflector Both cover and can are die cast aluminum for corrosion protection, strength, weight, and consistency of finish Frosted glass 120V can be parallel wired (“daisy chained”) up to 1188 watts (66 bulbs). Dimmable with an electronic low voltage dimmer on primary. UL listed and labeled wet and IC locations. Wall or surface mount only. One year. See back cover for details. COver options Applications 4 Interior steps 4 Exterior steps 4 Aisles 4 Halls 4 Paths 4 Patio lighting Scoop Louver Prism 4 Post lighting 4 Showers White xenon products fixture color options ordering logic 4 Entry lighting Black Z = Cover Type XWL-Z-YY L = Louver Cover S = Scoop Cover P = Prism Cover Bronze Aluminum YY = FIXTURE COLOR Note: WH = White BZ = Bronze BK = Black AL = Aluminum All fixtures have the flexibility to be recessed or surface mounted Accessories mounting options Recessed Concrete Cap - Required for direct pour mounting! Surface mount All photos and illustrations © 2015 National Specialty Lighting Wall Light Concrete Cap WL-CC Required for all concrete pour and brick wall applications. Concrete Cap installed in fixture 49 Xenon Mini Light Dimmable! Description Xenon 18 watt under cabinet light fixture. Approximately one-half the heat output of similar Halogen fixtures. Avg. bulb life of an impressive 10,000 hours. Does not emit harmful UV rays. Fully dimmable with the appropriate low voltage dimmer on the primary side of the transformer. Offered in six fixture finishes. Schematics 3" Features Xenon Bulbs • 12V 18 watt Xenon Bulbs • 10,000 hour average bulb life, versus 2,500 hour for 20 watt Halogen bulbs • Fixture is laboratory tested to have a heat output 1/2 of most Halogen mini lights • Dimmable Frosted Lens 7/8" 2 5/8" Surface Mount Ring 7/8" 2 7/8" Unit can be surface mounted or recessed Assembled Fixture 1 3/16" Applications 36” Leads • Sold as both custom orders matching specific light fixtures, transformers, lead wires and connectors to specific applications, and 3-light, 54 watt retail kits 50 5/16" 1 1/8" 4 4 4 4 4 Under cabinets Display cases Furniture China cases Office work stations National Specialty Lighting 2014 - 2015 Xenon Mini Light Dimmable! Specifications Voltage Bulb Specifications Average Bulb Life Fixture Finishes Protective Features Lens Leads Dimming Agency Approval Warranty 12V 18 watt wedge base Xenon 10,000 hours Gold, chrome, white, black, bronze, aluminum Heat-resistant plastic design Frosted 36” Dimmable with the appropriate low voltage dimmer on primary side of transformer ETL listed for use in cabinets and furniture with appropriate NSL transformer only One year. See back cover for details. Photometrics on page 57 fixture color options White Black Aluminum Bronze Chrome Gold 3-Light Kit Single Fixture (use transformers below) XML-3-(color) 3 Light kit XML-F-(color) fixture Contains: Instructions (3) Fixtures, 39” Lead Wires 60W Class 2 Electronic Transformer Connectors (6) 1-3/8” Mounting Screws (6) 7/16” Mounting Screws Contains: Instructions (1) Fixture, 36” Lead Wire Terminal Block (2) 1-3/8” Mounting Screws (2) 7/16” Mounting Screws X = No. of Fixtures ordering logic F = Single Fixture 3 = 3 Light Kit XML-X-Y Y = Fixture Cover W = White B = Black Z = Bronze A = Aluminum G = Gold C = Chrome Surface Mount Schematic Recessed Mount Schematic Wire access tab Requires 25/8" hole Two 7/16" screws Bezel with lens Power cords Surface mount ring Two 13/8" screws Accessories XML-DRILL Wire Screw Clips WSC-004 (30 per bag) Cabinet 3/8" 11/4" SURFACE MOUNT Light without Bezel & lens Bezel with lens Replacement bulb XEN-12-18W Clear TECLT-12-150 7.1” x 1.75” x 1.75” 1 circuit at 150 watts Up to 8 fixtures Must vent with 2 5/8" hole mounting options Light without Bezel & lens TECLT-12-60 6.5” x 1.5” x 1.5” Class 2, 1 circuit at 60 watts Up to 3 fixtures xenon products Purchase options Terminal Block LW-1 24" 30" RECESSED MOUNT 30" Counter Top 51 Galaxy Fiber Optic Systems Fibers from attic through existing dry wall ceiling Gloss Black Panel framed down from ceiling Applications Description 4 Dining Rooms System is comprised of a fiber optic illuminator of LED or Halogen light source, 12’ long, 1/16” (1.0mm) dia. clear acrylic fibers, and acrylic panels or existing ceiling/wall covering drilled to accept the fibers. Fiber optic illuminators ships with a black/white wheel for a twinkling star night effect, or a color wheel for a kaleidoscope effect. Standard acrylic panels fit into a 2’ x 2’ or 2’ x 4’ drop ceiling. Custom panels available to 4’ x 8’ and all panels can be mounted adjacent one another. ETL listed for indoor dry locations only. 4 Bedrooms 4 Bathrooms 4 Entryways 4 Living Rooms 4 Entertainment Rooms 4 Visual Merchandising 4 Exhibit Projects Features • Point-to-point acrylic fibers transmit light from the illuminator to a gloss or matte black panel. Black and white wheel create a “twinkling” effect. Color wheel is a kaleidoscope effect. PANEL DIMENSIONS Stock = 2’ x 2’ 2’ x 4’ Custom = Any dimension up to a 4’ x 8’ 52 Standard Panel Installation Illuminator Panel 110 V • Four illuminator choices • Low power usage. As many as 300 fibers illuminated by just 10 watts • New LED illuminator has 85% energy savings vs. similar Halogen model. Green Stickers ILLUMINATOR DIMENSIONS LED GP-5 = 7” x 5 1/2” x 5 3/4” Halogen GP-35 = 7” x 5 1/2” x 5 3/4” Halogen GP-50 = 11” x 5 1/2” x 5 3/4” Halogen GP-75 = 11” x 5 1/2” x 5 3/4” • Standard 2’ x 2’ and 2’ x 4’ panels pre-cut to fit in drop ceilings • Custom cut panels for special applications • Gloss and matte panel finish options National Specialty Lighting 2014 - 2015 Galaxy Fiber Optic Systems Specifications Illuminator 110 V Panel GP-5-12’ Interior showing 5 watt LED MR-16 bulb Standard “clear nite” panels are 2’ x 2’ or Fiber Number 2’ x 4’ and fit into standard drop ceilings. Illuminator Length of Fibers Custom sizes are available. Our “star GP-35B-12’ 12’ 160 point” fibers can also be placed into any GP-50-12’ 12’ 300 other medium of approximately 1” or less GP-5-12’ 12’ 300 width for custom applications (i.e., wood GP-75-12’ 12’ 400 or standard ceiling tiles). See instructions for complete specifications and installation All illuminators ETL Listed for indoor use only. details. (www.nslusa.com) Do not dim. One year warranty. See back cover for details. Maximum Panels / Area led products “Galaxy Fiber Optic Panel Systems” incorporates our own “clear nite” background panel. The “clear nite” background is a 3/16” gloss or matte black acrylic panel whose highly reflective surface allows for depth and multiple light point representation. Optional matte finish on plexiglass panels diffuses possible reflections from ambient room illumination. Maximum Total Fixture Fibers/Sq.Ft Wattage (3) 2x4 /24 sq. ft. (4) 2x4 / 32 sq. ft. (4) 2x4 / 32 sq. ft. (4) 2x4 / 32 sq. ft. 6.7 9.4 9.4 12.5 55 70 10 95 Note: Standard 2x4 panels are pre-drilled with 70 holes. Illuminator Purchase options GP-35B-12’ 35W Illuminator with a harness of 160 Fibers in a 12’ length. 7” x 5.5” x 5.75” - 35 watt Halogen bulb. GP-50-12’ 50W Illuminator with a harness of 300 Fibers in a 12’ length. 11” x 5.5” x 5.75”- 50 watt Halogen bulb. GP-75-12’ 75W Illuminator with a harness of 400 Fibers in a 12’ length. 11” x 5.5” x 5.75” - 75 watt Halogen bulb. incandescent GP-5-12’ 5W LED Illuminator with a harness of 300 Fibers in a 12’ length. 7” x 5.5” x 5.75”- 5 watt LED bulb. Panel Purchase options 2’ x 2’ Gloss = GP-P-2 Matte = GP-P-2-M 35 pre-drilled holes for fiber All photos and illustrations © 2015 National Specialty Lighting 2’ x 4’ Gloss = GP-P-4 Matte = GP-P-4-M 70 pre-drilled holes for fiber Custom = Contact distributor for quote 53 Photometrics Under Cabinet Applications 7" 7" 18” 18” A1 A1 6" 6" A A B1B1 6"6" A1 B C1 C1 D1 ILLUMINANCEGRID IN FOOTCANDLES: LOCATION: ILLUMINANCE IN FOOTCANDLES: H=18" A 86.2A LED Tape Light (Model no. LTP-3-WW) GRID LOCATION: Kitchen CabinetINPhotometrics ILLUMINANCE FOOTCANDLES: Kitchen Cabinet Photometrics LED Thin Star (Model no. LTH-12-XX) GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: Kitchen Cabinet Photometrics A H=18" 138 A A1 Lumens=248 111 ILLUMINANCE IN FOOTCANDLES: Kitchen Cabinet Photometrics GRID LOCATION: A1 28.4 H=18" A 50.3 A GRID LOCATION: GRID LOCATION: ILLUMINANCEGRID IN FOOTCANDLES: LOCATION: ILLUMINANCE IN FOOTCANDLES: GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: D1 74.7 B1 C C1 D D1 116 121 97.9 92.8 74.7 30.3 53.9 B C C1 D D1 46.2 26.6 35.0 20.9 B1 C C1 D D1 30.3 46.2 26.6 35.0 20.9 B1 45.5 Lumens=172 17.8 Watts=3.26 17.2 C C1 D D1 37.6 15.3 27.4 12.2 Lumens=308 A1 Watts=54 B B1 C C1 D D1 17.2 45.5 17.8 37.6 15.3 27.4 12.2 A1 B B1 C C1 D D1 35.5 25.1 43.0 30.5 36.5 26.9 Lumens=308 Lumens=131 H=18" A A1 25.8 11.2 21.3 15.6 Watts=54 Watts=18 A1 A B B 32.9 B1 35.5 B1 12.5 C 25.1 C 23.4 43.0 C1 9.9 C1 D D1 D 30.5 D1 36.5 26.9 11.4 6.1 Lumens=131 Watts=18 Lumens=367 Watts=6 H=18" H=18" AA A1 A1 47.9711.2 B B 74.88 32.9 B1 B1 C 50.52 12.561.88 C C1 23.442.30 C1D 45.01 9.9 D D1 D1 31.43 11.4 6.1 Lumens=125 Lumens=367Watts=2.9 Watts=6 H=18" H=18" A 18.2A 70.93 LED Puck Lights (Model no. LP-X-YY) Kitchen Cabinet Photometrics D 92.8 15.6 Lights (Model LP-X-YY) LED LED HardPuck Strip (Model no.no. LV-HS-NW-24T2-2Y) Kitchen Cabinet Photometrics C1 97.9 A ILLUMINANCEININFOOTCANDLES: FOOTCANDLES: 70.93 ILLUMINANCE 25.8 Kitchen Cabinet GRID Photometrics LOCATION: 38.2 21.3 Xenon (Model XML-F-XX) LEDMini HardLight Strip (Model no.no. LV-HS-NW-24T2-2Y) Kitchen Cabinet Kitchen CabinetPhotometrics Photometrics D1 54.7 51.4 C B Watts=3.26 A1 Xenon Mini Cabinet Light (Model no. XML-F-XX) H=18" Kitchen Photometrics ILLUMINANCE IN FOOTCANDLES: D1 38.2 D 121 B1 Watts=6.4 53.9 28.4 H=18" Xenon Task Light (Model no. XTL-3-HW/WH) GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: D B1 B A1 Lumens=172 Kitchen Cabinet Photometrics H=18" ILLUMINANCE IN FOOTCANDLES: 43.2 Kitchen Cabinet Photometrics GRID LOCATION: 12" 54.7 C1 116 Watts=6.4 144 B Lumens=248 A 50.3 Kitchen Cabinet Photometrics H=18" Xenon Task Light (Model no. XTL-3-HW/WH)A GRID LOCATION: GRID LOCATION: 12" H=18" ILLUMINANCE IN FOOTCANDLES: LED Mini Star II (Model no. LMSII-F-XX) 43.2 ILLUMINANCE IN FOOTCANDLES: C1 C 51.4 75.2 Watts=24.1 144 138 12" Watts=24.1 B 111 B1 75.2 61.4 Lumens=939 A1 12" C 61.4 B 91.0 Lumens=939 GRID LOCATION: LED Mini Star II (Model no. LMSII-F-XX) B1 91.0 58.3 D1 12" Watts=15.6 B H=18" GRID LOCATION: LED Thin Star (Model no. LTH-12-XX) ILLUMINANCE IN FOOTCANDLES: A1 58.3 A1 D1 D 12" 12" Watts=15.6 Lumens=446 C1 D D1 Lumens=446 86.2 LED Tape Light (Model no. LTP-3-WW) Kitchen Cabinet Photometrics C1 C 12" 3 LED Module Task Star Photometrics (Model no. LTS-3-HW/WH) Kitchen Cabinet H=18" Kitchen CabinetGRID Photometrics LOCATION: B1 B1 C 6" 6" 3 LED Module Task Star (Model no. LTS-3-HW/WH) 54 A1 B A1 B 8.3 A1 30.0 47.97 B1 B 13 74.88 Lumens=125 C B1 26.1 50.52 C1 C 11.1 61.88 D D1 15.0 C1 7.0 D D1 45.01 31.43 42.30 Watts=2.9 H=18" A A1 B B1 C C1 D D1 18.2 8.3 30.0 13 26.1 11.1 15.0 7.0 Photometrics LED LED Cove Applications LED Tape Light eStripLight LED Tape LED Brite eStripStrip LED Brite Strip FOOTCANDLES ON CEILING 116.0 FOOTCANDLES ON 7.9 CEILING 17.6 1.4 116.0 7.9 23.5 2.9 17.6 1.4 23.5 2.9 3.3 0.7 3.3 1.0 0.7 1.0 1.9 0.5 1.9 0.6 0.5 0.6 1.6 0.4 1.6 0.4 0.4 1.4 0.3 1.4 0.4 0.3 0.4 1.3 0.3 1.3 0.4 0.3 0.4 LED Tape Light (Model LTP-3-WW) LED Tapeno.Light Lumens=939 (Model no. LTP-3-WW) Watts=24.1 Lumens=939 Watts=24.1 LED eStrip (Model no. LES-3-WW 3 ft) LED eStrip Lumens=166 (Model no. LES-3-WW 3 ft) Watts=2.88 Lumens=166 Watts=2.88 LED Brite Strip (Model no.Strip BLF-4-WW 2 ft) LED Brite Lumens=200 (Model no. BLF-4-WW 2 ft) Watts=4.16 Lumens=200 Watts=4.16 LED Tape Light LED Tape eStripLight LED Brite eStripStrip LED Brite Strip 8' 8' 6' 6' 4' 4' 11.8 14.0 11.1 1.8 2.2 2.1 11.8 14.0 11.1 2.3 2.2 1.8 1.8 2.2 2.1 2.3 1.8 FLOOR FOOTCANDLES ON 2.2 TASK PLANE 30" ABOVE 8.1 1.6 8.1 1.4 1.6 1.4 5.8 1.1 5.8 1.1 1.1 1.1 4.3 0.9 4.3 0.8 0.9 0.8 3.4 0.7 3.4 0.7 0.7 0.7 2.0 0.4 2.0 0.4 0.4 0.4 2' 2' 8.8 1.6 8.8 1.6 5' 1.6 5' 7.0 1.3 7.0 1.3 7' 1.3 7' 5.4 1.1 5.4 1.1 9' 1.1 9' 4.3 0.8 4.3 0.8 0.9 11' 0.9 11' 3.5 0.7 3.5 0.7 13' 0.7 13' 2.6 0.5 2.6 0.5 15' 0.5 15' 2.2 6.5 2.2 6.5 1.6 4.7 1.6 4.7 1.4 3.9 1.4 3.9 1.1 3.0 1.1 3.0 1.0 3.0 1.0 3.0 1.0 2.9 1.0 2.9 FOOTCANDLES ON TASK PLANE 30" ABOVE FLOOR LED Tape Light LED Tape eStripLight LED Brite eStripStrip LED Brite StripFT FT 1.0 0.2 1.0 0.3 0.2 0.3 10.4 10.2 1.6 1.6 10.4 10.2 1.6 1.6 1.7 1.7 1' 3' 1.7 1.7 FOOTCANDLES ON FLOOR 1' 3' FOOTCANDLES ON FLOOR INCANDESCENT/XENON INCANDESCENT/XENON FOOTCANDLES ON CEILING ON 4.0 CEILING FC: 5W Incandescant FOOTCANDLES 23.4 67.4 11.6 FC: 10W Xenon 5W Incandescant 23.4 4.0 67.4 11.6 FC: 10W Xenon 5W Incandescant (Model no. BLF-4-XX 2 ft) 5W Incandescant Lumens=192 (Model no. BLF-4-XX 2 ft) Watts=40 Lumens=192 Watts=40 10W Incandescant (Model no. BLF-4-XX 2 ft) 10W Incandescant Lumens=550 (Model no. BLF-4-XX 2 ft) Watts=80 Lumens=550 Watts=80 8' 8' 6' 6' FC: 5W Incand FC: 10W Xenon 5W Incand FC: 10W Xenon 4.1 3.7 3.2 12.1 10.9 9.2 4.1 3.7 3.2 FOOTCANDLES ON10.9 TASK PLANE 30" ABOVE 12.1 9.2 FLOOR 2.7 7.7 2.7 7.7 2.3 6.6 2.3 6.6 2.0 5.9 2.0 5.9 1.8 5.3 1.8 5.3 1.6 4.7 1.6 4.7 2' 2' 2.7 2.7 7.7 7' 7.7 7' 2.3 2.3 6.8 9' 6.8 9' 2.1 2.1 6.1 11' 6.1 11' 1.9 1.9 5.5 13' 5.5 13' 1.7 1.7 4.8 15' 4.8 15' FOOTCANDLES ON TASK PLANE 30" ABOVE FLOOR FC: 5W Incand FC: 10W Xenon 5W Incand FT FC: 10W Xenon FT 3.6 3.3 10.5 9.7 3.6 3.3 1' 3' 10.5 9.7 FOOTCANDLES ON FLOOR 1' 3' 3.0 8.7 3.0 5' 8.7 5' FOOTCANDLES ON FLOOR 55 other 4' 4' Photometrics Lower Wall Mount Applications 9" A2 12" A1 B2 A A1 B1 C2 12" 12" A2 B1 B C1 B2 C1 C D2 D1 12" LED Step Star (Model no. LST-P-WH-WH) GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: Lumens=73.5 A 0 A1 0 A2 0 A 0 A1 0 A2 0 LED Brick Star (Model no. LBR-P-WH-WH) GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: GRID LOCATION: GRID LOCATION: A 0 A1 0 A2 0 ILLUMINANCE IN FOOTCANDLES: B1 2.51 B 5.62 B1 2.23 Lumens=86 A 0 A1 0 A2 0 A 0 A1 0 A2 0 Xenon Brick Light (Model no. XBL-P-WH) GRID LOCATION: B 6.42 Lumens=61.1 Xenon Step Light (Model no. XSL-P-WH) ILLUMINANCE IN FOOTCANDLES: B1 2.54 Lumens=70.2 LED Wall Star (Model no. LWS-P-WH-WH) ILLUMINANCE IN FOOTCANDLES: B 6.51 B 8.1 B1 2.3 Lumens=62 B 4.5 C2 D1 D B1 1.8 12" D2 12" 12" Watts=5.2 B2 0.53 C 2.11 C1 1.38 C2 0.56 D 0.79 D1 0.63 D2 0.36. C1 1.26 C2 0.53 D 0.70 D1 0.56 D2 0.33 C 1.62 C1 1.08 C2 0.46 D 0.59 D1 0.47 D2 0.28 C 3.5 C1 2.0 C2 0.6 D 1.3 D1 1.0 D2 0.5 C 1.9 C1 1.3 C2 0.5 D 0.8 D1 0.6 D2 0.4 C1 2.3 C2 0.7 D 1.6 D1 1.1 D2 0.5 C1 2.0 C2 0.7 D 1.3 D1 1.0 D2 0.5 Watts=5.2 B2 0.52 C 1.91 Watts=5.2 B2 0.47 Watts=18 B2 0.4 Watts=18 B2 0.4 Xenon Wall Light — Surface Mount (Model no. XWL-P-WH) Lumens=52.2 Watts=18 GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: A 0 A1 0 A2 0 Xenon Wall Light — Recessed (Model no. XWL-P-WH) GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: 56 A 0 A1 0 B 11.2 B1 3.0 B2 0.5 C 4.4 Lumens=52.2 Watts=18 A2 0 B 9.8 B1 3.2 B2 0.6 C 3.4 National Specialty Lighting 2014 - 2015 Photometrics 8’ or 9.5’ Upper Wall Mount Applications 8’ or 9.5’ 6’ 6’ A2 A1 12" B2 A A2 12" 12" 12" A1 B1 B A1 B2 C2 12" 12" C1 D2 A B1 C2 C1 D1 D2 A2 A1B1 CB A2 B2 B1 C1 C 12" B2 C1 D D1 12" 12" C2 D1 D LED Sconce Star (wide opening down, narrow opening up) (Model no. LSS-WW-AL) A 2.18 ILLUMINANCE IN FOOTCANDLES: GRID LOCATION: A A1 A2 A1 2.08 A2 1.76 B B1 2.18 2.08 1.76 8 ft.2.08 2.01 ILLUMINANCE IN FOOTCANDLES: Ceiling Photometrics (Ceiling height above floor) GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: Ceiling Photometrics (Ceiling height 8 ft. above floor) A A1 21.63 1.15 A2 0.16 GRID LOCATION: A A1 A2 9.5 ft.B above floor) B1 Ceiling Photometrics (Ceiling height 21.63 0.16 A 14.13 0.72 ILLUMINANCE IN FOOTCANDLES: GRID 1.15 LOCATION: A1 A2 ILLUMINANCE IN FOOTCANDLES: 5.87 1.67 0.27 B 2.08 B2 B1 2.01 1.72 B 14.13 B2 1.72 C 1.85 B1 0.72 B2 B 0.14 B1 5.39 1.73 B2 0.14 C 3.62 B2 0.23 D2 D2 12"12" 12" LED Sconce Star (wide openingFloor down, narrow opening up) (Model no. LSS-WW-AL) Photometrics (Fixture center 6 ft. above floor) LOCATION: Floor Photometrics (Fixture center 6 ft.GRID above floor) C2 D1 12" 12" Lumens=151 Lumens=151 C 1.85 C1 C1 1.78 1.78 C 3.62 C1 0.32 C 3.44 C2 1.50 C2 1.50 C1 0.32 C2 0.09 C2 C1 0.09 C2 1.56 0.16 D 1.46 D 1.46 D 0.13 D 0.13 D 1.85 Watts=10.4 Watts=10.4 D1 1.39 D1 D2 1.18 1.39 D1 0.09 D1 0.09 D1 0.64 D2 1.18 D2 0.05 D2 D20.05 0.13 Ceiling Photometrics (Ceiling height 9.5 ft. above floor) GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: A 5.87 A1 1.67 A2 0.27 B 5.39 B1 1.73 B2 0.23 C 3.44 C1 1.56 C2 0.16 D 1.85 D1 0.64 D2 0.13 Photometrics Decorative Applications 3" A2 6" A1 B2 A A1 B1 C2 6" A2 B1 B C1 D2 6" B2 C1 C D1 C2 D1 D 6" 6" D2 6" 6" LED Surface Star (Model no. LEDSS-WH-WH) Lumens=16.2 Watts=1.2 Floor Photometrics GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: A 0 A1 0 A2 0 B 20.2 B1 0.37 B2 0.05 C 3.0 C1 1.81 C2 0.06 D 0.86 D1 0.70 D2 0.37 6"3" 6" 6" A2 A1 A1 B2 C2 B1 6" 12" A B1 6" D2 A1 A2 A A2 B1 B C1 B B2 B2 C1 C D1 C2 D1 D 6" 6" D2 6" 6" LED Disc Light (3" above floor) (Model no. LEDMD-WW-YY) Lumens=2 Watts=0.54 GRID LOCATION: A 0 A1 0 A2 0 B1 11.6 B2 1.6 C 8.9 C1 5.1 C2 1.8 D 2.8 D1 2.2 D2 1.1 D2 D D1 B 49.2 other 12" ILLUMINANCE IN FOOTCANDLES: C2 C C1 Floor Photometrics (Cool White) LED MiniDisc Light (3" above floor) (Model no. LEDMD-WW-YY) Lumens=2 Watts=0.54 12" Floor Photometrics (Cool White) LED Surface Star GRID LOCATION: 12" Handrail Photometrics ILLUMINANCE IN FOOTCANDLES: GRID LOCATION: A 0 A A1 0 A1 A2 0 A2 B 0.94 B B1 0.25 B1 B2 0.04 B2 C 0.17 C C1 0.1 C1 C2 0.04 C2 D 0.05 D D1 0.04 D1 D2 0.02 D2 ILLUMINANCE IN FOOTCANDLES: 20.2 0.37 0.37 3.0 0.06 0.06 0.35 0.23 0.23 0.10 0.08 0.08 A 1.44 A1 0.07 A2 0.01 B 0.86 B1 0.22 B2 0.03 C 0.12 C1 0.07 C2 0.03 D 0.04 D1 0.03 D2 0.02 LED MiniDisc Scoop Light (3" above floor) (Model no. LEDMDS-WW-YY) Lumens=1 Watts=0.54 Floor Photometrics (Cool White) GRID LOCATION: ILLUMINANCE IN FOOTCANDLES: 57 LED Drivers/Dimmers/Accessories Note: Dimmable LED Drivers 4 Wattage ratings are for maximum load of dimming LED Drivers. Use without dimmer or for peak performance with dimmer, requires a minimum load ≥ 50% of maximum load. 4 All dimmable LED Drivers are ETL listed as an indoor/outdoor stand alone power supplies. TR12L20DC 5.6” x 2” x 2.14” Class 2 1 circuit at 20 watts for 12VDC TR12L40DC 5.6” x 2” x 2.14” Class 2 1 circuit at 40 watts for 12VDC TR12L60DC 6.55” x 2.25” x 2.55” Class 2 1 circuit at 60 watts for 12VDC TR24L20DC 5.6” x 2” x 2.14” Class 2 1 circuit at 20 watts for 24VDC TR24L40DC 5.6” x 2” x 2.14” Class 2 1 circuit at 40 watts for 24VDC TR24L60DC 6.55” x 2.25” x 2.55” Class 2 1 circuit at 60 watts for 24VDC 4 All hardwire LED Drivers ship with an outdoor rated low voltage strain relief included. TR24L96DC 6.55” x 2.25” x 2.55” Class 2 1 circuit at 96 watts for 24VDC nON Dimmable LED Drivers LEDDR-12-60W 10.25”x 3”x 2” Class 2 1 circuit at 60 watts for 12VDC RU Component indoor/outdoor listed LEDDR-24-120W 11.6”x 3.6”x 2.25” Either 1 circuit at 90 watts, or 2 circuits at 60 watts for 24VDC RU Component indoor/outdoor listed LMS-24-60W 4.5”x 2.1”x 1.5” 1 circuit at 60 watts for 24VDC UL Listed as a plug-in indoor stand alone power supply Dimmers SkylarkTM Low Voltage Magnetic Dimmer ED-LV/W-480 (white) ED-LV/I-480 (ivory) For use with “TR” LED Drivers or transformers under 480 watts. Connects on 120VAC side of transformer. Maximum wattage is listed for primary side of transformer. Read fixture and dimmer instructions before use. SkylarkTM Standard 120VAC Dimmer ED-HV/W-600 (white) ED-HV/I-600 (ivory) For use with all 120VDC LED Module products, and most “TE” transformers under 480 watts. Connects on 120VAC side of transformer. Maximum wattage is listed for primary side of transformer. Read fixture and dimmer instructions before use. Mounting accessories Wire Screw Clips WSC-004 (30 per bag) 58 LMSII-001 Class 2 Junction Box & Terminal Block 1-7/16”(l) x 11/16”(w) x 9/16”(h) National Specialty Lighting 2014 - 2015 Transformers Magnetic ETL listed indoor and outdoor TR-12-150 10”x 3.1”x 3” 1 circuit at 150 watts for 12VAC TR-12-240 10”x 4.25”x 3.6” 1 circuit at 240 watts for 12VAC TR-12-300 or TR-24-300 10”x 4.25”x 3.6” 2 circuits at 150 watts each for 12VAC 1 circuit at 300 watts for 24VAC TR-12-480 or TR-24-480 11.1”x 4.75”x 4.25” 2 circuits at 240 watts each for 12VAC 1 circuit at 480 watts for 24VAC TR-24-600 11.1”x 4.75”x 4.25” 2 circuits at 300 watts each for 24VAC TR-24-960 12.5”x 7.0”x 4.75” 2 circuits at 480 watts each for 24VAC ELECTRONIC listed as a component (“RU” Marking). Check your fixture listing for acceptability. UL All connections must be made per fixture listing and NEC. 120VAC input/11.6VAC output. TER-12-60/W (white) TER-12-60/B (black) 3.5” x 1.5” x 1” 1 circuit at 60 watts, class 2, 11.6VAC ELECTRONIC TE-12-80 2.125” x 1.25” x 0.75” 1 circuit at 80 watts for 11.6VAC TE-12-105 3.0” x 1.25” x 0.75” 1 circuit at 105 watts for 11.6VAC TE-12-150 4.0”x 1.6”x 1” 1 circuit at 150 watts for 11.6VAC listed as a stand alone power supply (“ETL” Marking). Each transformer is enclosed in a painted steel ETL enclosure with 1/2” knockouts for the incoming 120VAC and the 11.7VAC output. Note: other 4 All transformer and LED driver dimensions are Length x Width x Height 4 All transformer dimensions are of enclosure including mounting flanges and included strain relief. 4 All transformers should not be totally enclosed, and must ventilate. TECLT-12-60 6.5” x 1.5” x 1.5” Class 2, 1 circuit at 60 watts for 11.7VAC TECLT-12-150 7.1”x 1.75”x 1.75” 1 circuit at 150 watts for 11.7VAC All photos and illustrations © 2015 National Specialty Lighting 4 All LED drivers, dimmers and transformers carry a two year warranty. 59 Warranty Average Bulb Life National Specialty Lighting tests average bulb life and LED life under standard industry specifications. Lifetime figures and warranty periods for each product line are listed below. Individual bulb life or LED life experience may vary with actual environmental conditions (i.e, proper installations, ambient temperature, and input voltage fluctuations). Extended Limited Warranty National Specialty Lighting, Ltd. (“NSL”) hereby warrants to the original purchaser only, the following products, for the warranty periods specifically identified for each product below, to be free from defects in material and workmanship under normal use and service. If the original purchaser of an NSL product listed below discovers any defect in the material and workmanship in such product during the applicable warranty period, NSL shall, at NSL’s cost, repair or replace, at NSL’s sole option, any defective product. The applicable warranty ProductRated LED Life (Hours) Warranty Period period shall commence on the date the product is shipped from NSL’s warehouse facility. The foregoing warranty shall include cost of shipment of the product from and to the original purchaser and NSL, but NSL shall have no responsibility for any labor charges relating to the removal, installation or reinstallation of the product. The products may represent a possible shock or fire hazard if improperly installed or attached in any way. THIS EXTENDED LIMITED WARRANTY DOES NOT APPLY TO ANY PRODUCTS WHICH HAVE NOT BEEN INSTALLED IN ACCORDANCE WITH THE OWNER’S MANUAL, CURRENT LOCAL CODES, AND/OR THE CURRENT NATIONAL ELECTRICAL CODE. All warranty claims or questions should be addressed to NSL, Attn: President, 2299 Kenmore Ave, Tonawanda, NY 14207. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE. EXCEPT FOR THE FOREGOING EXTENDED LIMITED WARRANTY, NSL MAKES NO OTHER WARRANTY WHATSOEVER WITH RESPECT TO ITS PRODUCTS. Product Avg. Bulb Life (Hours) Warranty Period LED LV-DL Series 50,000 3 years LED Surface Star 40,000 2 years LED Hard Strip 40,000 2 years LED Brite Strip 40,000 2 years LED Puck Lights 30,000 2 years LED Fiber Optic 40,000 2 years LED Tape Light 40,000 2 years Brite Strip & Accessories LED eStrip 40,000 2 years 10,000 2,500 1 year (6 mos.-bulbs) 3 months (MR11 bulbs) LED Thin Star 40,000 3 years Xenon Task Light 10,000 1 year 10,000 1 year LED Task Star 40,000 3 years Xenon Step Light LED Mini Star II 40,000 3 years Xenon Brick Light 10,000 1 year 10,000 1 year 10,000 LED Sconce Star 40,000 2 years Xenon Wall Light LED Step Star 40,000 2 years Xenon Mini Light Halogen Galaxy Fiber Optic 5,000 1 year 1 year (6 mos.-bulbs) LED Brick Star 40,000 2-3 years LED Wall Star 40,000 2 years Transformers/Dimmers --------- 1 year LED Drivers --------- 2 years LED Disc Light 50,000 3 years LED MiniDisc Light 40,000 2-3 years of Contents 18 LED Product Lines LED LV-DL Series ___________________ 2 LED Hard Strip _____________________ 6 LED LP Puck Lights__________________ 8 LED Tape Light____________________ 10 LED eStrip_________________________ 12 LED Thin Star______________________ 14 LED Task Star______________________ 16 LED Mini Star II____________________ 18 LED Sconce Star___________________ 20 LED Step Star______________________ 22 LED Brick Star_____________________ 24 LED Wall Star______________________ 26 LED Disc Light_____________________ 28 LED MiniDisc Light_________________ 30 LED MiniDisc Scoop Light__________ 32 LED Surface Star___________________ 34 LED Brite Strip_____________________ 36 LED Galaxy Fiber Optic_____________ 52 60 6 Xenon Product Lines Brite Strip__________________________38 Xenon Task Light___________________41 Xenon Step Light___________________44 Xenon Brick Light___________________46 Xenon Wall Light___________________48 Xenon Mini Light___________________50 All product instructions can be found on our website: www.nslusa.com Design by: Nancy McLaughlin Table © 2015 National Specialty Lighting Price: $4.95 Halogen/Incandescent Product Line Halogen Galaxy Fiber Optic_________52 Other Dimmers/LED Drivers_______________58 Transformers_______________________59 Photometrics____________________54-57 National Specialty Lighting 800-527-2923 www.nslusa.com