DR2MH™ T-6 Metal Halide • Remote Ballast (RD) PROJECT: TYPE: CATALOG NUMBER: SOURCE: NOTES: CATALOG NUMBER LOGIC DR2MH T635 RD Example -DR2MH- T635 - Configure Ballast Housing Separately RD - 81 - BLP - Ballast Housing Required 2 REMOTE BALLAST HOUSINGS: HP2RM - HP2 Remote Housing PM2RM - Universal Power Module 2 Remote RM - Remote Wall Mount Material Blank-Aluminum B- Brass S-Stainless Steel Faceplate DR2MH - Drive Star™ (T-6 Metal Halide) OptiLock® T635 - T-6 Metal Halide (35W) Housing RD - Remote Deep Housing (Requires Remote Ballast) Lamp Type 0 - By Others 81 - (35W) Metal Halide T-6/830 Finish Aluminum & Brass Faceplates Powder Coat Color Satin Premium Finish Brass Faceplates Wrinkle Machined MAC Polished POL MitiqueTM MIT Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP — Verde — VER Stainless Faceplates Machined Polished Brushed MAC POL BRU Interior use only. ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI SDS Sonoran Desert Sandstone AQW Antique White CRMCream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF BGEBeige MDS Mojave Desert Sandstone WCP Weathered Copper BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper Cracked Ice Textured Forest Also available in RAL Finishes See submittal SUB-1439-00 Optical Openings 1-Single 2 - 2 at 180° 4 - 4 at 90° LAMP DATA BK No. 81 Lamp Watts 35 Description 35T6/MH/830 B-K LIGHTING Rated Life 12,000 Initial Lumens 3,300 Mean Lumens 2,600 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com CRI 81 SUBMITTAL DATE 5-28-14 CCT(K) 3,000 DRAWING NUMBER SUB-1367-00 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN. DR2MH™ T-6 Metal Halide • Remote Ballast (RD) PROJECT: TYPE: 7" Dia. (178mm) 1 1/2" (38mm) SIDE VIEW 2 3/8" (60mm) FACEPLATE 7" Dia. (178mm) 7" Dia. (178mm) 1 1/2" (38mm) 1 1/2" (38mm) 2 3/8" (60mm) 2 3/8" (60mm) 16 3/8" (416mm) 10" Dia (254mm) Patented Stability Flange 10" Dia (254mm)10" Dia (254mm) 16 3/8" (416mm) 16 3/8" (416mm) 3/16" (5mm) BOTTOM VIEW 3/16" (5mm) 3/16" (5mm) Patented StabilityPatented Flange Stability Flange 2 1/8" (54mm) 4" (102mm) 2 1/8" (54mm) 2 1/8" (54mm) 4" (102mm) 4" (102mm) All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. SPECIFICATIONS GreenSource Initiative™ Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements. Fixture Housing Corrosion-free composite, made from high strength, thermo-formed, sheet molded polyester compound. Glass reinforced, flame retardant and UV stabilized. (2) Bottom-Entry, 3/4" NPT female conduit entries with knockout plugs and (4) side flats for 1/2" or 3/4" conduit adapters. Socket Specification grade ceramic body lamp holder rated for 5kV starting pulse. G12 bi-pin base, nickel-plated contacts and stainless steel, heat resistant lamp retaining clips. Installation For direct burial in soil or concrete. Consult Drainage Installation Guide for In-Grade Fixtures (DIG-IT) for compliance with proper soil preparation and drainage requirements prior to installation. Remote Ballast For use with remote metal halide ballast. See ballast technical data to determine lamp-to-ballast distance and wiring requirements prior to detailing field installation of any remote wiring. Patented Stability Flange Corrosion-free composite flange projects into installation sub-strate to reinforce housing stability. Integral REBAR saddles simplify installation onto concrete form. (4) Orthogonal bosses permit use of 1/2" PCV conduit or EMT to simplify vertical position and leveling of housing. Preset self-tapping screws anchor housing at proper elevation. Wiring / Connectors Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659 standard. Features OptiLock® and gear tray quick disconnects. Patented HydroLock® with anti-siphon valve (ASV™) wireway. (3) Water-Tight connectors supplied for line connection. Maximum (2) #10 & (1) #18. Minimum (1) #12 & (1) #18. Optics Fixed position bracket ensures a highly efficient, direct component contribution by the lamp to the lens. 360° stainless steel cutoff shield provides field adjustable brightness control. Water Management Self Evacuating Airtight Lamp Module (S.E.A.L.™). IP-68 rated, vacuum sealed enclosure. Patented Anti-Condensation Valve (ACV™) eliminates condensation from optical chamber. High temperature silicone ‘O’ Ring at faceplate. RD features patented HydroLock® technology which provides fail safe water barrier between junction box and interior components. Anti-siphon valve (ASV™) prevents “wicking" through conductor insulation. B-K LIGHTING Lens High heat, shock resistant, 1/8" Pyrex® vertical prism glass lens. Suitable for walk-over and drive-over applications to 35,000 lbs. Faceplate Solid, 2-3/8" machined 6061T6 aluminum with (4) black oxide, captive, stainless steel mounting screws. Faceplate options include solid, 2-3/8" machined brass and solid, 2-3/8" machined stainless steel. Finish StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Brass components are available in powder coat or handcrafted metal finish. Stainless steel components are available in handcrafted metal finish. (Brushed finish for interior use only). Listings ETL Listed to ANSI/UL Standard 1598 and Certified to CAN/CSA Standard C22.2 No. 250. IP68 Rated. Made in the USA. ®Teflon is a registered trademark of DuPont Corporation 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 5-28-14 DRAWING NUMBER SUB-1367-00 Precision2® and its features are covered in whole or in part by U.S. Patent Nos. 7,033,038; 6,254,258 B1; 7,249,867 B2; 7,370,988 B2; 7,553,042; 7,560,148; and 7,699,489. HP2RM™ Remote Ballast In-Grade PROJECT: 7" Dia TYPE: CATALOG NUMBER: 7 1/4" Dia 1" SOURCE: NOTES: 2 1/8" REMOTE WIRING CATALOG NUMBER LOGIC Remote ballast installations require inter-connected wiring between the lamp and ballast (By Others) and have specific wiring requirements between these components. Ballast manufacturers regularly recommend the following wiring details for such installations. HP2RM Example- HP2RM - H70M - BLP - 120 - GM-R Material Blank-Aluminum B- Brass S-Stainless Steel Remote Ballast Housing Electronic Ballast HP2RM - Remote In-Grade (Flush) • 1 Foot Minimum and 15 Foot Maximum Remote Wire Length (Ballast to Lamp Socket). BallastHP2-RM-H35E Type Metal Halide H35M - (35W) Magnetic H50M - (50W) Magnetic H70M - (70W) Magnetic H100M - (100W) Magnetic H150M H35E H50E H70E - - - - H100E - (100W) Electronic H150E - (150W) Electronic* (150W) Magnetic (35W) Electronic (50W) Electronic (70W) Electronic Finish Aluminum & Brass Faceplates * H150E Available in 120 VAC or 277 VAC only. Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP — Verde — VER Machined MAC Polished POL MitiqueTM MIT Stainless Faceplates Machined MAC Polished POL BRU Brushed Interior use only. Also available in RAL Finishes See submittal SUB-1439-00 Input Voltage 120 - 120 Volt 277 - 277 Volt MT - 120/208/240/277 Volt Multi Tap* ABP Antique Brass Powder HUG Hunter Green AMG Aleutian Mountain Granite MDS Mojave Desert Sandstone AQW Antique White NBP Natural Brass Powder BCM Black Chrome OCP Old Copper BGEBeige RMG Rocky Mountain Granite BPP Brown Patina Powder SDS Sonoran Desert Sandstone CAP Clear Anodized Powder SMG Sierra Mountain Granite CMG Cascade Mountain Granite TXF CRI WCP Weathered Copper Cracked Ice CRMCream *Electronic Ballast Only • Each pair of dedicated lamp leads must be 18 gauge, wire type SF-2 or SFF-2. Premium Finish Brass Faceplates Powder Coat Color • Each pair of dedicated lamp leads must be run in a separate, dedicated metal conduit. • Lamp leads must be placed in a minimum 1/2” internal diameter conduit, pipe, or flexible conduit. • The use of metal clad cable assemblies or service power cords (SJ, SO, etc.) is prohibited. Magnetic Ballast • 35 Watt = 15 Foot Minimum and 50 Foot Maximum Remote Wire Length (Ballast to Lamp Socket). • >35 Watt = 1 Foot Minimum and 50 Foot Maximum Remote Wire Length (Ballast to Lamp Socket). Textured Forest Please consult the factory through your local B-K Lighting Sales Representative prior to finalizing any installation detail utilizing remote ballast wiring. WIR Weathered Iron Option Failure to comply with specific wiring requirements will void product warranty. GM-R - Round Grout Mask GM-S - Square Grout Mask BALLAST ELECTRICAL DATA BALLAST TYPE INPUT VOLTS INPUT WATTS INPUT CURRENT CIRCUIT TYPE MINIMUM START TEMPERATURE REMOTE BALLAST WIRE LENGTH H35M Magnetic 120 53 1.10 HX-HPF -20° F 15’ Min - 50’ Max. H35M Magnetic 277 56 0.40 HX-HPF -20° F 15’ Min - 50’ Max. H50M Magnetic 120 72 1.00 HX-HPF -20° F 1’ Min - 50’ Max. H50M Magnetic 277 72 0.50 HX-HPF -20° F 1’ Min - 50’ Max. H70M Magnetic 120 90 1.90 HX-HPF -20° F 1’ Min - 50’ Max. H70M Magnetic 277 90 0.80 HX-HPF -20° F 1’ Min - 50’ Max. H100M Magnetic 120 129 1.50 HX-HPF -22° F 1’ Min - 50’ Max. H100M Magnetic 277 118 0.35 HX-HPF -22° F 1’ Min - 50’ Max. H150M Magnetic 120 185 1.90 HX-HPF -22° F 1’ Min - 50’ Max. H150M Magnetic 277 173 0.75 HX-HPF -22° F 1’ Min - 50’ Max. H35E* Electronic 120 44 0.39 HPF -5° F 1’ Min - 15’ Max. H35E* Electronic 277 44 0.17 HPF -5° F 1’ Min - 15’ Max. H50E* Electronic 120 58 0.49 HPF -5° F 1’ Min - 15’ Max. H50E* Electronic 277 58 0.21 HPF -5° F 1’ Min - 15’ Max. H70E* Electronic 120 79 0.67 HPF -5° F 1’ Min - 15’ Max. H70E* Electronic 277 79 0.29 HPF -5° F 1’ Min - 15’ Max. H100E* Electronic 120 110 0.90 HPF -5° F 1’ Min - 15’ Max. H100E* Electronic 277 110 0.41 HPF -5° F 1’ Min - 15’ Max. H150E* Electronic 120 167 1.40 HPF -22° F 1’ Min - 15’ Max. Electronic 277 167 0.61 HPF -22° F 1’ Min - 15’ Max. H150E* *Ballast Manufacture’s requirement: Wire used must only be 18 gauge, SF2 or SFF2, and be in a dedicated metal conduit of 1/2” I.D. Minimum, per lamp. B-K LIGHTING 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 5-28-14 DRAWING NUMBER SUB-1797-00 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN. HP2RM™ Remote Ballast In-Grade PROJECT: 7" Dia (178mm) 7" Dia TYPE: 7 1/4" Dia SIDE VIEW TOP VIEW 1" 7" Dia (178mm) 7 1/4" Dia (184mm) 2 1/8" 7 1/2" Dia (190mm) 1" (25mm) 7 1/4" DiaDia 7 1/2" (184mm) (190mm) 7 1/4" Dia 10" Dia (184mm) (254mm) HP2-RM-H35E 14 1/2" (368mm) 1" 14 1/2" (25mm) (368mm) Grade 3/8" (9mm) 1/ (3m Patented Stability Flange 7 1/4" Dia (184mm) BOTTOM VIEW 14 1/2" (368mm) Patented Hydro-Lock™ Barrier Plate Assembly (ACV™) 10" Dia (254mm) 2 1/8" (54mm) 2 1/8" (54mm) Patented Stability Flange 4" Dia (102mm) 4" Dia (102mm) Patented Hydro-Lock™ Barrier Plate Assembly (ACV™) 2 1/8" (54mm) 4" Dia (102mm) HP2-RM-H35E CO2-R SPECIFICATIONS All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. GreenSource Initiative™ Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements. Installation Integral, copper-free aluminum concrete pour collar (CPC), furnished in Black finish, permits for direct burial installation in soil or concrete. Consult Drainage Installation Guide for In-Grade Fixtures (DIG-IT) for compliance with proper soil preparation and drainage requirements prior to installation. For use with remote metal halide fixture (specified separately). Suitable for walk-over and drive-over applications to 35,000 lbs. Materials Water Management IP-68 rated, vacuum sealed enclosure. Patented Anti-Condensation Valve (ACV™) eliminates condensation from ballast chamber. High temperature silicone ‘O’ Ring at faceplate. Patented HydroLock® technology provides fail safe water barrier between junction box and interior components. Anti-siphon valve (ASV™) prevents “wicking” through conductor insulation. Furnished in Copper-Free Aluminum (Type 6061-T6), Brass (Type 360) or Stainless Steel (Type 304). Faceplate Solid, 1/2” machined faceplate with (5) black oxided, captive, stainless steel mounting screws. Faceplate installs flush to grade. Housing Corrosion-free composite, made from high strength, thermo-formed, sheet molded polyester compound. Glass reinforced, flame retardant and UV stabilized. (2) Bottom-Entry, 3/4” NPT female conduit entries with knockout plugs and (4) side flats for 1/2” or 3/4” conduit adapters. Stability Flange Patented, corrosion-free composite flange projects into installation sub-strate to reinforce housing stability. Integral REBAR saddles simplify installation onto concrete form. (4) Orthogonal bosses permit use of 1/2” PVC conduit or EMT to simplify vertical position and leveling of housing. Pre-set self-tapping screws anchor housing at proper elevation. Magnetic Ballast Class H insulated, integral, high power factor, magnetic ballast. 120V or 277V primary voltage, 60Hz. Integral, removable gear tray with quick disconnect and carrying handle. Electronic Ballast High power factor, integral, electronic ballast. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz. H150E available in 120V, or 277V primary voltage. 50/60Hz. Integral, removable gear tray with quick disconnect and carrying handle. B-K LIGHTING Wiring / Connectors Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659 standard. Gear tray quick disconnects. Patented HydroLock® with anti-siphon valve (ASV™) wireway. (5) Water-tight connectors supplied for branch circuit and lamp connection. Maximum (2) #10 & (1) #18. Minimum (1) #12 & (1) #18 per connector. Finish StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Brass components are available in powder coat or handcrafted metal finish. Stainless steel components are available in handcrafted metal finish. (Brushed finish for interior use only). Warranty 5 year limited warranty. Listings ETL Listed to ANSI/UL Standard 1598 and Certified to CAN/CSA Standard C22.2 No. 250. IP-68 Rated. RoHs compliant. Made in USA. ®Teflon is a registered trademark of DuPont Corporation. 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 5-28-14 DRAWING NUMBER SUB-1797-00 Precision2® and its features are covered in whole or in part by U.S. Patent Nos. 7,033,038; 6,254,258 B1; 7,249,867 B2; 7,370,988 B2; 7,553,042; 7,560,148; and 7,699,489 HP2-R PM2RM SURFACE MOUNT Metal Halide PROJECT: TYPE: CATALOG NUMBER: SOURCE: NOTES: CATALOG NUMBER LOGIC PM2RM Example SM REMOTE WIRING H35E Electronic Ballast PM2RM- SM - H35E - BZP - MT Remote ballast installations require inter-connected wiring between the lamp and ballast (by others). Electronic ballasts have specific wiring requirements between these components. Ballast manufacturers regularly recommend the following wiring details for such installations: Series PM2RM - Universal Power Module™ 2 Remote Mounting • 1 Foot Minimum and 15 Foot Maximum Remote Wire Length (Ballast to Lamp Socket). SM - Surface Mount (requires side conduit entry) • Each pair of dedicated lamp leads must be run in a separate, dedicated metal conduit. Ballast Type H35E - 35W Electronic Metal Halide Ballast • Lamp leads must be 18 gauge, wire type SF-2 or SFF-2. Finish Standard Finish Premium Finish Powder Coat Color Satin Wrinkle ABP Bronze BZP BZW AMG Aleutian Mountain Granite Antique Brass Powder MDS Mojave Desert Sandstone NBP Natural Brass Powder Old Copper Black BLP BLW AQW Antique White OCP White (Gloss) WHP WHW BCM Black Chrome RMG Rocky Mountain Granite Aluminum SAP — BGEBeige SDS Verde — VER BPP Brown Patina Powder SMG Sierra Mountain Granite CAP Clear Anodized Powder TXF CMG Cascade Mountain Granite WCP Weathered Copper CRI WIR CRMCream HUG Hunter Green Cracked Ice Sonoran Desert Sandstone • Each pair of dedicated lamp leads must be placed in a minimum 1/2” internal diameter conduit, pipe, or flexible conduit. • The use of metal clad cable assemblies or service power cords (SJ, SO, etc.) is prohibited. Please consult the factory through your local B-K Lighting Sales Representative prior to finalizing any installation detail utilizing remote ballast wiring. Failure to comply with specific wiring requirements will void product warranty. Textured Forest Weathered Iron Also available in RAL Finishes See submittal SUB-1439-00 Input Voltage MT - 120/208/240/277 Volt Multi Tap (Electronic Ballast) BALLAST ELECTRICAL DATA BALLAST TYPE INPUT VOLTS INPUT WATTS INPUT CURRENT CIRCUIT TYPE MINIMUM START TEMPERATURE REMOTE BALLAST WIRE LENGTH H35E Electronic 120 44 0.39 HPF -5° F 1’ Min - 15’ Max. H35E Electronic 277 44 0.17 HPF -5° F 1’ Min - 15’ Max. Ballast Manufacture’s requirement: Wire used must only be 18 gauge, SF2 or SFF2, and be in a dedicated metal conduit of 1/2” I.D. Minimum, per lamp. B-K LIGHTING 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 6-10-14 DRAWING NUMBER SUB-1524-00 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN. PM2RM SURFACE MOUNT Metal Halide PROJECT: TYPE: TOP VIEW SIDE VIEW 1/4" 2 1/4" 22 1/4" 3/4" 1 3/4" 11 3/4" O.C.O.C. O.C. (4) Clearance Clearance Holes (4) Clearance Holes (4) Holes for 1/4" 1/4" Fasteners for 1/4" Fasteners for Fasteners (by (by others) others) (by others) 5/8" 8 5/8" 88 5/8" O.C.O.C. O.C. 1/8" 9 1/8" 99 1/8" 3/4" 7 3/4" 77 3/4" 7/8" 3 7/8" 33 7/8" 3/8" 3 3/8" 33 3/8" END VIEW 3/8" 2 3/8" 22 3/8" With Supplied With Supplied With Supplied Mounting Bracket Mounting Bracket Mounting Bracket (4) Patented Patented 1/2"1/2" Knockouts (4) Patented Knockouts (4) 1/2" Knockouts ForFor UseUse withwith Surface Surface For Use with Surface Conduit (By (By Others) Conduit Others) Conduit (By Others) All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. SPECIFICATIONS GreenSource Initiative™ Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 1/2” NPT female conduit entries per end cap for through wiring. Ballast [1] 35 watt, integral, high power factor, electronic metal halide ballast. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz. Installation Universal design for remote metal halide fixture (specified separately) Water-tight installation in three distinct mounting conditions. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Warranty 5 year limited warranty. Surface Mount For use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation. Patented Knockouts [4] 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. B-K LIGHTING UPM’s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 Finish StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Listings NEMA 4X / IP-66 Rated Enclosure. ETL Listed to ANSI/UL Standard 50/50E and Certified to CAN/CSA Standard C22.2 No. 94.1/94.2. RoHs compliant. Made in USA. 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 6-10-14 DRAWING NUMBER SUB-1524-00 PM2RM JUNCTION BOX (CAMLOCK™) Metal Halide PROJECT: TYPE: CATALOG NUMBER: SOURCE: NOTES: CATALOG NUMBER LOGIC PM2RM Example REMOTE WIRING H35E PM2RM- CT - H35E - BZP - MT - Electronic Ballast MB Remote ballast installations require inter-connected wiring between the lamp and ballast (by others). Electronic ballasts have specific wiring requirements between these components. Ballast manufacturers regularly recommend the following wiring details for such installations: Series PM2RM - Universal Power Module™ 2 Remote Mounting • 1 Foot Minimum and 15 Foot Maximum Remote Wire Length (Ballast to Lamp Socket). CT - Rectangular CamLock™ CR - Round CamLock™ • Each pair of dedicated lamp leads must be run in a separate, dedicated metal conduit. Ballast Type H35E - 35W Electronic Metal Halide Ballast • Lamp leads must be 18 gauge, wire type SF-2 or SFF-2. Finish Standard Finish Premium Finish Powder Coat Color Satin Wrinkle ABP Bronze BZP BZW AMG Aleutian Mountain Granite Antique Brass Powder MDS Mojave Desert Sandstone NBP Natural Brass Powder Old Copper Black BLP BLW AQW Antique White OCP White (Gloss) WHP WHW BCM Black Chrome RMG Rocky Mountain Granite Aluminum SAP — BGEBeige SDS Verde — VER BPP Brown Patina Powder SMG Sierra Mountain Granite CAP Clear Anodized Powder TXF CMG Cascade Mountain Granite WCP Weathered Copper CRI WIR CRMCream HUG Hunter Green Cracked Ice Sonoran Desert Sandstone • Each pair of dedicated lamp leads must be placed in a minimum 1/2” internal diameter conduit, pipe, or flexible conduit. • The use of metal clad cable assemblies or service power cords (SJ, SO, etc.) is prohibited. Please consult the factory through your local B-K Lighting Sales Representative prior to finalizing any installation detail utilizing remote ballast wiring. Failure to comply with specific wiring requirements will void product warranty. Textured Forest Weathered Iron Also available in RAL Finishes See submittal SUB-1439-00 Input Voltage MT - 120/208/240/277 Volt Multi Tap (Electronic Ballast) Options MB - Mounting Brackets BALLAST ELECTRICAL DATA BALLAST TYPE INPUT VOLTS INPUT WATTS INPUT CURRENT CIRCUIT TYPE MINIMUM START TEMPERATURE REMOTE BALLAST WIRE LENGTH H35E Electronic 120 44 0.39 HPF -5° F 1’ Min - 15’ Max. H35E Electronic 277 44 0.17 HPF -5° F 1’ Min - 15’ Max. Ballast Manufacture’s requirement: Wire used must only be 18 gauge, SF2 or SFF2, and be in a dedicated metal conduit of 1/2” I.D. Minimum, per lamp. B-K LIGHTING 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 6-10-14 DRAWING NUMBER SUB-1523-00 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN. PM2RM JUNCTION BOX (CAMLOCK™) Metal Halide PROJECT: TYPE: FRONT VIEW 7 3/4" 7 3/4" SIDE VIEW 7 3/4" 3 7/8" 3 3/8" 3 3/8" 3 7/8" 3 7/8" 3 1/4" (83mm) 5" O.C. (127mm) 3 3/8" Round CamLock™ Canopy END VIEW 2 1/2" 2 1/2" With Supplied 2 1/2"With Supplied Mounting Plate With Supplied Mounting Plate Mounting Plate 3" (76mm) 1/8" (3mm) 1/8" (3mm) 2 1/2" 2 1/2" With Supplied 2 1/2"With Supplied (4) Patented 1/2" Knockouts (4) Patented 1/2" Knockouts Mounting CanopyWith Supplied Mounting Canopy For Use with Surface For Use Surface (4) Patented 1/2"with Knockouts Mounting Canopy Conduit (By Others) Conduit (By Others) For Use with Surface Conduit (By Others) RECTANGULAR CamLock™ Canopy 1/8" (3mm) 3" (76mm) (4) 1/2" Knockouts (4) 1/2" Knockouts For use with Surface For use with Surface (4) 1/2" Knockouts Conduit (By Others) Conduit (By3 1/4" Others) For use with Surface (83mm) Conduit (By Others) 5" O.C. (127mm) 5" Dia. (127mm) 1/8" (3mm) All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. SPECIFICATIONS GreenSource Initiative™ Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements. Installation Universal design for remote metal halide fixture (specified separately) Water-tight installation in three distinct mounting conditions. Round CamLock™ Canopy (Recessed Junction Box) 5” diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4” octagonal junction box. [2] tamper-resistant, black oxide stainless steel mounting screws. 1/8” thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock™ provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface. Rectangular CamLock™ Canopy (Recessed Junction Box) Machined aluminum, 3” x 5” rectangular canopy for use with single gang junction box. [2] tamper resistant, black oxide stainless steel mounting screws. 1/8” thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock™ provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 1/2” NPT female conduit entries per end cap for through wiring. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. B-K LIGHTING UPM’s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 Patented Knockouts [4] 1/2” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Ballast 5" Dia. (127mm) [1] 35 watt, integral, high power factor, electronic metal halide ballast. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz. Finish StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. ETL Listed to ANSI/UL Standard 50/50E and Certified to CAN/CSA Standard C22.2 No. 94.1/94.2. RoHs compliant. Made in USA. 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 6-10-14 DRAWING NUMBER SUB-1523­-00 3 3/8" Remote Ballast Housing Surface Mount PROJECT: SURFACE MOUNT REMOTE BOX TYPE: SUB-1799 CATALOG NUMBER: SOURCE: NOTES: CATALOG NUMBER LOGIC REMOTE WIRING RM Example RM - H35E - MT - SAP Remote ballast installations require inter-connected wiring between the lamp and ballast (by others) and have specific wiring requirements between these components. Ballast manufacturers regularly recommend the following wiring details for such installations. Remote Ballast Housing RM - Remote Wall Mount Ballast Type Electronic Ballast Metal Halide H35M - (35W) Magnetic H50M - (50W) Magnetic H70M - (70W) Magnetic H100M - (100W) Magnetic H150M H35E H50E H70E - - - - (150W) Magnetic (35W) Electronic (50W) Electronic (70W) Electronic High Pressure Sodium H100E - (100W) Electronic S35M - (35W) Magnetic** H150E - (150W) Electronic* S50M - (35W) Magnetic S70M - (70W) Magnetic • Each pair of dedicated lamp leads must be run in a separate, dedicated metal conduit. • Lamp leads must be 18 gauge, wire type SF-2 or SFF-2. * H150E Available in 120 VAC or 277 VAC only. ** S35M Available in 120 VAC Only. Input Voltage • Each pair of dedicated lamp leads must be placed in a minimum 1/2” internal diameter conduit, pipe, or flexible conduit. 120 - 120 Volt 277 - 277 Volt MT - 120/208/240/277 Volt Multi Tap • 1 Foot Minimum and 15 Foot Maximum Remote Wire Length (Ballast to Lamp Socket). • The use of metal clad cable assemblies or service power cords (SJ, SO, etc.) is prohibited. Electronic Ballast Only. * H150E available in 120 VAC or 277 VAC only Finish Standard Finish Magnetic Ballast Premium Finish Powder Coat Color Satin Wrinkle ABP CMG Cascade Mountain Granite RMG Rocky Mountain Granite Bronze BZP BZW Black BLP BLW AMG Aleutian Mountain Granite CRI SDS AQW Antique White CRMCream SMG Sierra Mountain Granite White (Gloss) WHP WHW Aluminum SAP — BCM Black Chrome HUG Hunter Green TXF BGEBeige MDS Mojave Desert Sandstone WCP Weathered Copper Verde — VER BPP Brown Patina Powder NBP Natural Brass Powder WIR CAP Clear Anodized Powder OCP Old Copper Antique Brass Powder Cracked Ice Sonoran Desert Sandstone Textured Forest Weathered Iron Also available in RAL Finishes See submittal SUB-1439-00 • 35 Watt = 15 Foot Minimum and 50 Foot Maximum Remote Wire Length (Ballast to Lamp Socket). • >35 Watt = 1 Foot Minimum and 50 Foot Maximum Remote Wire Length (Ballast to Lamp Socket). Please consult the factory through your local B-K Lighting Sales Representative prior to finalizing any installation detail utilizing remote ballast wiring. Failure to comply with specific wiring requirements will void product warranty. BALLAST ELECTRICAL DATA BALLAST TYPE INPUT VOLTS INPUT WATTS INPUT CURRENT CIRCUIT TYPE MINIMUM START TEMPERATURE REMOTE BALLAST WIRE LENGTH H35M Magnetic 120 53 1.10 HX-HPF -20° F 15’ Min - 50’ Max. H35M Magnetic 277 56 0.40 HX-HPF -20° F 15’ Min - 50’ Max. H50M Magnetic 120 72 1.00 HX-HPF -20° F 1’ Min - 50’ Max. H50M Magnetic 277 72 0.50 HX-HPF -20° F 1’ Min - 50’ Max. H70M Magnetic 120 90 1.90 HX-HPF -20° F 1’ Min - 50’ Max. H70M Magnetic 277 90 0.80 HX-HPF -20° F 1’ Min - 50’ Max. H100M Magnetic 120 129 1.50 HX-HPF -22° F 1’ Min - 50’ Max. H100M Magnetic 277 118 0.35 HX-HPF -22° F 1’ Min - 50’ Max. H150M Magnetic 120 185 1.90 HX-HPF -22° F 1’ Min - 50’ Max. H150M Magnetic 277 173 0.75 HX-HPF -22° F 1’ Min - 50’ Max. H35E* Electronic 120 44 0.39 HPF -5° F 1’ Min - 15’ Max. H35E* Electronic 277 44 0.17 HPF -5° F 1’ Min - 15’ Max. H50E* Electronic 120 58 0.49 HPF -5° F 1’ Min - 15’ Max. H50E* Electronic 277 58 0.21 HPF -5° F 1’ Min - 15’ Max. H70E* Electronic 120 79 0.67 HPF -5° F 1’ Min - 15’ Max. H70E* Electronic 277 79 0.29 HPF -5° F 1’ Min - 15’ Max. H100E* Electronic 120 110 0.90 HPF -5° F 1’ Min - 15’ Max. H100E* Electronic 277 110 0.41 HPF -5° F 1’ Min - 15’ Max. H150E* Electronic 120 167 1.40 HPF -22° F 1’ Min - 15’ Max. Electronic 277 167 0.61 HPF -22° F 1’ Min - 15’ Max. H150E* *Ballast Manufacture’s requirement: Wire used must only be 18 gauge, SF2 or SFF2, and be in a dedicated metal conduit of 1/2” I.D. Minimum, per lamp. S35M Magnetic 120 46 0.80 RX-HPF -40° F 1’ Min - 15’ Max. S50M Magnetic 120 66 1.00 HX-HPF -40° F 1’ Min - 35’ Max. S50M Magnetic 277 66 0.50 HX-HPF -40° F 1’ Min - 35’ Max. S70M Magnetic 120 91 1.40 HX-HPF -40° F 1’ Min - 35’ Max. S70M Magnetic 277 91 0.70 HX-HPF -40° F 1’ Min - 35’ Max. B-K LIGHTING 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 7-10-12 DRAWING NUMBER SUB-1799-00 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN. 3 3/8" Remote Ballast Housing Surface Mount PROJECT: SURFACE MOUNT REMOTE BOX TYPE: SUB-1799 SIDE VIEW BACK VIEW 5 1/2" 4" 6" 5 1/2" 3 3/4" 8" 4" 4" 6" 5 1/2" 6" 3 3/4" 8" 3 3/4" 8" 3 3/8" END VIEW 3 3/8" 3 3/8" SURFACE MOUNT REMOTE BOX SUB-1799 All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. SPECIFICATIONS GreenSource Initiative™ Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements. Installation Nema 3R, surface mount design. For use with remote metal halide fixture (specified separately). Housing Steel construction with screw cover. Front access for ease of installation and inspection. [2] bottom entry, 3/4” conduit knockouts. SURFACE MOUNT REMOTE BOX SUB-1799 Finish Wiring / Connectors Teflon® coated wire, 18 gauge, 600V, 250°C rated and StarGuard®, our exclusive RoHs compliant, 15 stage certified to UL1659 standard. Pre-wired and labeled chromate-free process cleans and conversion coats terminal strip. SURFACE MOUNT REMOTE BOX aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Magnetic Ballast SUB-1799 [1] 35-150 watt, Class H insulated, integral, high Warranty power factor, magnetic ballast. 120V or 277V primary 5 year limited warranty. voltage, 60Hz. Listings Electronic Ballast NEMA 3R Enclosure. ETL Listed to ANSI/UL Standard [1] 35-150 watt, integral, high power factor, electronic 50/50E and Certified to CAN/CSA Standard C22.2 No. ballast. Multi-Tap (120/208/240/277V) primary 94.1/94.2. RoHs compliant. Made in USA. voltage 50/60Hz. H150E available in 120V, or 277V primary voltage. 50/60Hz. B-K LIGHTING ®Teflon is a registered trademark of DuPont Corporation. 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 7-10-12 DRAWING NUMBER SUB-1799-00