Issue Number │001 June 2016 New Product Announcement AM9468/AM9469 Single Phase Full Wave Direct PWM Motor Driver AM9468/9 are high-performance, low-noise, single-phase (single coil), brushless direct current (BLDC) driver solutions for fans and motors. The integrated fullbridge driver output stage uses a BTL linear driver architecture to minimize audible switching noise and electromagnetic interference (EMI) providing a low noise solution. For system flexibility, motor speed can be controlled by an external PWM signal, a DC voltage or from a thermistor network. Based on the input signal, AM9468/9 adjusts the output duty cycle. To help protect the motor coil, AM9468/9 provides Rotor Lock Protection which shuts down the output drive if rotor lock is detected. The device automatically re-starts when the rotor lock is removed. In case of overvoltage, the device shuts down the output drive and enters standby mode to help prevent overvoltage stress on the coil. Overtemperature shutdown provides safe thermal protection. AM9468 is packaged in powercapable, low profile TSSOP-16; AM9469 in thermally-enhanced TSSOP-16EP with exposed pad. The Diodes Advantage AM9468/69 provide highly integrated, ultra low noise, high performance, yet simple solutions for a wide range of cooling fans and motor drive applications Hall Sensor Bias Voltage, Amplifier, Voltage Reference and H-Bridge Switch - The Hall input signals are amplified to drive BTL output structure to achieve ultra low noise - Integrate H-Bridge power switches capable of continuous motor current of 500mA (AM4968) OR 750mA (AM4969) - Minimal external component helps to reduce PCB area and system cost Speed Control by PWM Input Signal , DC Voltage or Vdd Supply - Flexible speed control by an external PWM signal, by adjusting the DC signal voltage on the PWM pin or the supply voltage Lock Detect, Shutdown and Automatic Restart - Helps protect coil from overheating or burning during rotor lock Thermal Shutdown - Provides safe, reliable and robust operation - Thermal shutdown helps to protect coil, component and PCB Power Capable, Low Profile TSSOP16 and Thermally Enhanced TSSOP16-EP Packages Operating Temperature Range -40oC to +105oC - Suitable for thermally demanding, enclosed cooling fan applications Circuit Functions CPU Cooler Fans in PCs 12V Brushless DC cooling fans, extractors and pumps www.diodes.com Issue Number │001 June 2016 New Product Announcement AM9468/AM9469 Typical Application Schematic Product Portfolio Part Avg. Supply Peak Reference Operating Output Hall Current Motor Voltage Voltage Drive Bias (No Load) Current Output Current Voltage Speed Control Lock Speed Detect, Min Control Shutdown Speed Slope and Setting Adjust AutoRestart FG / RD Protection Features (mA) (mA) (mA) (V) AM9789 2 to 6 1.8 -- 1,000 -- 1.3 PWM -- -- Yes FG TSD, OCP AM9799 2 to 6 4 1,000 -- 1.3 VDD -- -- Yes FG TSD, OCP 1,000 6 1.25 PWM, VDD -- Yes Yes FG, RD TSD, OCL 1,000 -- 1.25 Yes Yes Yes FG, RD TSD, OCL 1,000 -- -- Yes Yes Yes FG/RD 1,000 -- -- Yes Yes Yes FG/RD AM4961 3.5 to 16 8 AM4962 3.5 to 16 8 AM4963 3.5 to 16 /R 8 AM4964 3.5 to 16 8 AM4953 2.2 to 16 4 AM4951 2.2 to 24 /R 5 AM4952 2.2 to 24 5 AM9468 2.4 to 18 2.5 AM9469 2.4 to 18 2.5 --- -- -- -- -1.45 --- 800 -- 500 -- -- 500 -- 1.5 500 1,200 5 1.25 750 1,200 5 1.25 -- Ordering information PWM, VDD, Slope Adjust PWM +Temp, VDD, Slope Adjust PWM +Temp, VDD, Slope Adjust VDD BTL Linear VDD BTL Linear VDD BTL Linear PWM ,DC Voltage or Vdd PWM ,DC Voltage or Vdd Package o (V) -- Temp Range ( C) -40 to +105 MSOP8 -40 to +105 -30 to +90 -30 to +90 HTSSOP14 SSOP16 HTSSOP14 SSOP16 TSD -30 to +90 HTSSOP14 SSOP16 TSD -30 to +90 HTSSOP14 SSOP16 -40 to +105 -- -- Yes FG, RD TSD -- -- Yes FG, RD TSD -- -- Yes FG, RD TS Yes Yes Yes FG/RD TSD, OCP -40 to +105 Yes Yes Yes FG/RD TSD, OCP -40 to +105 -40 to +105 -40 to +105 Device Packaging Reel size Tape width Quantity AM9468-T16-13 TSSOP-16 13” 12mm 2.5k AM9469-T16E-13 TSSOP-16EP 13” 12mm 2.5k www.diodes.com MSOP8 MSOP8 MSOP10, SSOP10,SO8 , PSOP8 MSOP8 PSOP8 (EP) MSOP10 TSSOP-16 TSSOP-16EP