HMC364S8G SMT GaAs HBT MMIC DIVIDE-BY-2, DC

advertisement
MICROWAVE CORPORATION
HMC364S8G
v02.1202
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
FREQ. DIVIDER & DETECTORS - SMT
10
Typical Applications
Features
Prescaler for DC to X Band PLL Applications:
Ultra Low SSB Phase Noise: -145 dBc/Hz
• Satellite Communication Systems
Wide Bandwidth
• Fiber Optic
Output Power: 4 dBm
• Pt-Pt and Pt-MPt Radios
Single DC Supply: +5V
• VSAT
S8G SMT Package
Functional Diagram
General Description
The HMC364S8G is a low noise Divide-by-2
Static Divider with InGaP GaAs HBT technology
in an 8 lead surface mount plastic package. This
device operates from DC (with a square wave
input) to 12.5 GHz input frequency with a single
+5.0V DC supply. The low additive SSB phase
noise of -145 dBc/Hz at 100 kHz offset helps the
user maintain good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Conditions
Maximum Input Frequency
Minimum Input Frequency
Input Power Range
Output Power
Reverse Leakage
SSB Phase Noise (100 kHz offset)
Output Transition Time
Min.
Typ.
12.5
13.5
Sine Wave Input. [1]
Max.
GHz
0.2
0.5
GHz
Fin = 1 to 10 GHz
-15
>-20
+10
dBm
Fin = 10 to 12 GHz
-10
>-15
+5
dBm
Fin = 12 to 12.5 GHz
-4
>-8
+2
dBm
Fin = 6 GHz
2
5
Fin = 9 GHz
-2
dBm
Fin = 11 GHz
-5
dBm
Fin = 12.5 GHz
-8
dBm
dBm
Both RF Outputs Terminated
40
dB
Pin = 0 dBm, Fin = 6 GHz
-145
dBc/Hz
Pin = 0 dBm, Fout = 882 MHz
100
ps
105
mA
Supply Current (Icc)
1. Divider will operate down to DC for square-wave input signal.
10 - 38
Units
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
MICROWAVE CORPORATION
HMC364S8G
v02.1202
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
20
10
10
Recommended
Operating Window
0
-10
-20
Min Pin +25 C
Max Pin +25 C
Min Pin +85 C
Max Pin +85 C
Min Pin -40 C
Max Pin -40 C
0
-10
-20
-30
-30
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
0
1
2
3
4
INPUT FREQUENCY (GHz)
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
5
6
7
8
9
10 11 12 13 14 15
INPUT FREQUENCY (GHz)
SSB Phase Noise
Performance, Pin= 0 dBm, T= 25 °C
Output Power vs. Temperature
0
+25 C
+85 C
-40 C
0
1
2
3
4
5
6
7
8
9
-20
SSB PHASE NOISE (dBc/Hz)
OUTPUT POWER (dBm)
10
-40
-60
-80
-100
-120
-140
-160
2
10
10 11 12 13 14 15
10
INPUT FREQUENCY (GHz)
3
10
4
10
5
10
6
10
7
OFFSET FREQUENCY (Hz)
Output Harmonic
Content, Pin= 0 dBm, T= 25 °C
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
0
Pfeedthru
3rd Harmonic
-20
-30
-40
-50
Both Output Ports Terminated
One Output Port Terminated
-10
POWER LEVEL (dBm)
OUTPUT LEVEL (dBm)
-10
FREQ. DIVIDERS & DETECTORS - SMT
20
INPUT POWER (dBm)
INPUT POWER (dBm)
MMIC
SUB-HARMONICALLY
PUMPED
MIXER
- 25 GHz
InputGaAs
Sensitivity
Window,
T= 25 °C
Input
Sensitivity
Window17
vs. Temperature
-20
-30
-40
-50
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
INPUT FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
INPUT FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10 - 39
MICROWAVE CORPORATION
HMC364S8G
v02.1202
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
FREQ. DIVIDER & DETECTORS - SMT
10
AMPLITUDE (mV)
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
Absolute Maximum Ratings
700
600
500
400
300
200
100
0
-100
-200
-300
-400
-500
-600
-700
22.7 22.9 23.1 23.3 23.5 23.7 23.9 24.1 24.3 24.5 24.7
RF Input (Vcc = +5V)
-13 dBm
Vcc
+5.5V
VLogic
Vcc -1.6V to Vcc -1.2V
Storage Temperature
-65 to -150 °C
Operating Temperature
-40 to +85 °C
Typical Supply Current vs. Vcc
TIME (nS)
Vcc (V)
Icc (mA)
4.75
93
5.0
105
5.25
115
Note: Divider will operate over full voltage range shown above
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEADFRAME MATERIAL: COPPER ALLOY
3. LEADFRAME PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
10 - 40
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
MICROWAVE CORPORATION
HMC364S8G
v02.1202
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
Pin Description
Function
Description
1
OUT
Divided output 180° out of phase with pin 3.
2, 6
N/C
No connection. These pins must not be grounded.
3
OUT
Divided Output.
4
VCC
Supply voltage 5V ± 0.25V.
5
IN
RF Input must be DC blocked.
7
IN
RF Input 180° out of phase with pin 5 for differential operation.
A/C ground for single ended operation
8
GND
Ground Backside of package has exposed metal ground slug which
must be connected to ground.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10
FREQ. DIVIDERS & DETECTORS - SMT
Pin Number
10 - 41
MICROWAVE CORPORATION
v02.1202
HMC364S8G
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
Evaluation PCB
FREQ. DIVIDER & DETECTORS - SMT
10
List of Materials
Item
Description
J1 - J3
PC Mount SMA RF Connector
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5
1000 pF Capacitor, 0603 Pkg.
C6
10 µF Tantalum Capacitor
U1
HMC364S8G Divide-by-2
PCB*
104627 Eval Board
* Circuit Board Material: Rogers 4350
10 - 42
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads
and backside ground slug should be connected directly
to the ground plane similar to that shown. A sufficient
number of via holes should be used to connect the top
and bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request. This evaluation board is designed for single ended input testing. J2
and J3 provide differential output signals.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
MICROWAVE CORPORATION
v02.1202
HMC364S8G
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
Application Circuit
FREQ. DIVIDERS & DETECTORS - SMT
10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10 - 43
Download