Eaton® POD
Class III/Cat A, Surge Powerboard for IT & AV applications
Series Power Filter & Shunt Surge Diverter
10A, 220-250V, 60kA
The Eaton POD protects your precious Computer System, Home
Entertainment System & other valuable electronic equipment
from surges, spikes & noise caused by lightning & other power
disturbances.
Its series power filter provides superior protection against
surges & spikes, with the additional benefit of protecting against
line noise that may affect sensitive equipment. With a surge
rating of 60kA, the POD out-performs & outlasts many other
products that provide shunt-only protection.
The POD not only protects your power circuits, but also protects
against “back door” surges that can enter your systems
telephone lines, aerials or network cables.
The POD is manufactured from the highest quality materials
& is ergonomically & aesthetically designed to suit office &
home installations. Rest easy with a five year full replacement
warranty & a $100,000 load protection guarantee* (Australia &
New Zealand).
Key Features:
• POD 6 Outlet or POD+ 8 Outlet models
• 60,000 Amp surge protection
• Highest quality power sockets with extra wide spacing
• Visual indication of Power & Surge Protection status
• 1.8 metre power cord with insulated pins
• Resettable circuit breaker
• Power On/Off switch
• Data, Video/Aerial & Phone Line surge protection on POD
• Data, Video/Aerial, Cable TV & Phone Line surge
protection on POD+
• Network cable, telephone cable & Coax cable supplied
• Wall mountable to save valuable floor space
Surge Category
POD & POD+ are suitable
for use in category
locations:
Class III/Cat A
(6kV/200A) Long final sub
circuits & power outlets
www.eaton.com/powerquality
www.eatonelectric.com.au
Eaton® POD
Specifications
Power Connections
POD
POD+
Input Voltage:
220-250VAC
Phone/Fax Connections (RJ11)
POD
POD+
Nominal Line Impedance
6000 Ohms
Frequency:
50/60Hz
Maximum Line Voltage
Maximum Continuous Load:
10 Amps
Clamping Voltage (Line to Line)
430V (270Vac RMS)
Clamping Voltage
(Line to Earth)
600V (375Vac RMS)
Test Classification
Class III (IEC 61643-1), Category A (ANSI/IEEE
C62.41)
Current Limiting:
Resettable Circuit Breaker
Clamping Voltage (Line to Neutral):
470V
Clamping Voltage (Neutral to Earth):
680V
275Vrms
Response Time
500ns nominal
Maximum Surge Current
Peak let-through voltage (3kA L-L)
Response Time:
5nS Nominal
Aggregate Surge Current:
60,000 Amps
Aggregate energy absorption
Video/Aerial Connections
Connections
Maximum surge current (one pulse L-N):
40,000 Amps
Maximum surge current (one pulse L-E):
10,000 Amps
Nominal Line Impedance
Maximum surge current (one pulse N-E):
10,000 Amps
Signal Loss
1470 Joules
Clamping Voltage
Aggregate Energy Absorption:
Attenuation at full load:
>40dB @ 1MHz
Network Connections (RJ45)
POD
300 joules
POD
POD+
Video Connector
Video Connector & F Type
Screw Connector
75 Ohms
Approx. 3dB @ 500MHz
600V (375 Vac RMS)
Maximum Surge Current
POD+
Lines Protected
20,000 Amps
1000V
1/2, 3/6
Dimensions (L x W x Hmm)
Weight
Clamping Voltage (Line to Line)
<20V
Clamping Voltage (Line to Earth)
600V (375 Vac RMS)
Surge Current - Amp (10/1000us)
20 Amps (2ms) / 40
20,000 Amps
Aggregate energy absorption
200 joules
338 x 130 x 42
383 x 130 x 42
0.8 kg
1.0 kg
Power Cord
1.8 metres length
Due to continual product improvement specifications are subject to change without notice.
Copyright 2010 Eaton Corporation.
Layout Diagrams
Circuit
B reaker
Indication
for Protected
& Earthed
Power Sw itch
with illumination
TV Antenna
In/Out
Network
(broadband / Ethernet)
Telephone / Fax
/ Answeri ng
machine etc.
Circuit
B reaker
Indication
for Protected
& Earthed
Power Sw itch
with illumination
TV Antenna
In/Out
Network
(broadband / Ethernet)
Ex tra-wide spacing
for plug packs
Insulated pins
Telephone / Fax
/ Answeri ng
machine etc.
Ex tra-wide spacing
for plug packs
Insulated pins
Eaton Low Voltage Surge Protection - Australia & new Zealand
1300 3 EATON (1300 3 332 866)
www.eaton.com/powerquality www.eatonelectric.com.au