CURRICULUM VITAE Luming Li, Ph.D.

advertisement
CURRICULUM VITAE
Luming Li, Ph.D.
A.
Personal Information:
Home address
Room204, North Part, Mengminwei Technology Building,
Tsinghua University, Beijing, 100084, P. R. China
Email: [email protected]
B. Education:
Undergraduate degree and major
Tsinghua University, 1986-1991
Beijing, China
B.S. Degree in Mechanical Eng.
Graduate degree and major
Tsinghua University, 1991-1996
Beijing, China
M.S. & Ph.D. Degree in Material Science and Engineering.
C. Current position and address:
Cheung Kong Scholars Professor, and, the director of National Engineering
Laboratory for Neuro-modulation, also the Chair of Department of Aeronautics
and Astronautics
Tsinghua University
Beijing, China, 100084
D. Appointments and teaching responsibilities:
1996-1998 Mechanical Engineering Department, Tsinghua University, Deputy
Director, Lecturer
1998-1999 Surry Space Center, Surry University, UK
1999-2003 Mechanical Engineering Department, Tsinghua University, Associate
Professor
2003-2004 Mechanical Engineering Department, Tsinghua University, Professor
E.
2004-
Institute for Man-Machine-Environment Engineering Research,
School of Aerospace Engineering, Tsinghua University, Director,
Professor
2011-
Chair, Aeronautics and Astronautics Depart. School of Aerospace
Engineering, Tsinghua University, Department Chair, Professor
2012-
National Engineering Laboratory for Neuro-modulation, director,
Professor
Professional Society Memberships:
Member of international steering committee of international symposium on
applied electromagnetics (ISEM)
Founder member of Alliance for Innovations in Neural Technology
IEEE Associate Membership
Expert group member of china's manned space development strategy and advance
research in space medicine
Expert Committee member of Lunar Exploration Science Applications
Vice President of Chinese Neuromodulation Society
Vice President of space medicine and space biology society of China
Vice chairman of Electrical nerve stimulation for Research and Treatment of
Beijing Key Laboratory Academic Committee
Vice President of Nondestructive Testing Society of China
F.
Professional Service:
Editorial Board, Space Medicine and Engineering
Editorial Board, Nondestructive Testing
G. Research Support:
2001-2003 Principal Investigator, “Research on the testing method and
application of defect magnetic leakage field under the geomagnetic
field”
Funding: National Natural Science Foundation of China
2003-2005 Principal Investigator, “Research the fatigue Evaluation and failure
prevention technologies on the key components of the train wheel”
Funding: National High Technology Program (863) , China
2004-2006 Principal Investigator, “Research on the Mechanism of Stress
concentration and geomagnetic environment in the process of the
formation of the Magnetic Memory field”
Funding: National Natural Science Foundation of China
2006-2007 Principal Investigator, “Research on Physiological signal test device ,
Mass measuring instrument and Neuromuscular Stimulator for
Astronaut”
Funding: Manned-Space-Mission Project, China
2006-2007 Principal Investigator, “Reliability platform of Manned spaceflight
embedded devices”
Funding: 985 Program, Tsinghua University
2006-2008 Principal Investigator, “New Century Excellent Talents Program”
Funding: Ministry of Education, China
2006-2008 Principal Investigator, “Research on the Deep brain stimulator for
Parkinson's disease”
Funding: State Science and Technology Support Program, China
2006-2008 Principal Investigator, “Research on the implantable electrical
stimulation therapy system”
Funding: State Science and Technology Support Program, China
2006-2008 Principal Investigator, “Research on the key technologies and
demonstration of Lifeline engineering and special equipment security”
Funding: State Science and Technology Support Program, China
2008-2010 Principal Investigator, “Research on the Non-destructive evaluation
method for stress concentration based on metal magnetic memory”
Funding: National Natural Science Foundation of China
2008-2011 Principal Investigator, “initial research on the Physiological signal
device, Mass measurement and neuromuscular stimulation and the
reader for astronaut”
Funding: Manned-Space-Mission Project, China
2009-2011 Principal Investigator, “ Research on rechargeable technology for
implantable device”
Funding: Ministry of Education, China
2009-2011 Principal Investigator, “Research on the Clinical Trials of Deep brain
stimulator”
Funding: Beijing Science and Technology Commission
2009-2015 Principal Investigator, “R & D on the nerve stimulator Series of
products”
Funding: Enterprises and institutions commissioned projects
2011-2013 Principal Investigator, “Feasibility and biological interface property
study on MRI compatibility deep brain stimulation lead Based on
Carbon Nanotubes”
Funding: National Natural Science Foundation of China
2011-2013 Principal Investigator, “Research on the method of implantable
electrical stimulation against disuse bone loss”
Funding: National Natural Science Foundation of China
2011-2013 Principal Investigator, “R & D on the electrical stimulator for brain”
Funding: State Science and Technology Support Program, China
2012-2015 Principal Investigator, “Study on the deep brain stimulation study”
Funding: National Science Fund for Distinguished Young Scholars,
National Natural Science Foundation of China
2012-2015 Principal Investigator, “Research on the carbon nanotube electrodes
and its characteristics with MRI”
Funding: Ministry of Education, China
2013-2015 Principal Investigator, “National Engineering Laboratory for
Neuromodulation”
Funding: National Development and Reform Commission, China
H. Papers published (selected):
1.
CL Zhang, Minsheng Wu, YP Hong, Luming Li, YJ Zhang. Effects of
arc-excited ultrasonic on microstructures and properties of weld, Transactions
of Nonferrous Metals Society of China, 2000, 10(6), 712-716.
2.
Luming Li*, Songling Huang, P Zheng, Keren Shi. Evaluation of surface
cracks using magnetic flux leakage testing, Journal of Materials Science &
Technology, 2002, 18(4), 319-321.
3.
Luming Li*, Songling Huang, LF Wang, Haiqing Yang, Keren Shi. Research
on magnetic testing method of stress distribution, Transactions of
Nonferrous Metals Society of China, 2002, 12(3), 388-391.
4.
Luming Li*, Jun Wu, Long Hu. Temperature environment of cameras on
Hangtian-Tsinghua-1 Micro Satellite,Multispectral and Hyperspectral Remote
Sensing Instruments and Applications, 2002, 330-337.
5.
JL Du, Luming Li, YJ Zhang, Minsheng Wu, ZG Yang. Grain refinement in
welding using ultrasound for high performance, Materials Technology, 2002,
17(3), 138-139.
6.
Luming Li*, Songling Huang, Xiaofeng Wang, Keren Shi, Su Wu. Magnetic
field abnormality caused by welding residual stress, Journal of Magnetism and
Magnetic Materials, 2003, 261(3), 385-391.
7.
Luming Li*, Songling Huang, Xiaofeng Wang. Stress induced magnetic field
abnormality, Transactions of Nonferrous Metals Society of China, 2003,13(1),
6-9.
8.
Songling Huang, Luming Li, Keren Shi,,Xiaofeng Wang. Magnetic field
properties caused by stress concentration, Journal of Central South University
of Technology, 2004, 11(1), 23-26.
9.
Songling Huang, Luming Li, Haiqing Yang, Keren Shi. Influence of slot
defect length on magnetic flux leakage, Journal of Materials Science &
echnology, 2004, 20(2), 231-232.
10. Xiongwei Wen, Luming Li, Huatang Zhang, Hongwei Hao, Zhiqing Lu.
Preparation of thermal
barrier coatings by ultrasonic plasma spraying,
Transactions of Nonferrous Metals Society of China, 2004, 14, 92-94.
11. Songling Huang, Luming Li, Xiaofeng Wang. Magnetic evaluation method
for stress annealing of ferromagnetic materials, Materials Technology, 2005,
20(1), 5-6.
12. Gang Huang, Luming Li, Yiping Cao, Xing Chen. A new type of instrument
with its special excited input-signal in inspecting residual stress, RESIDUAL
STRESSES, 2005, 490, 177-182.
13. Xing Chen, Luming Li, En Yang, XF Huang. Effects of stress cycles on
surface magnetic field, RESIDUAL STRESSES, 2005, 490, 317-321.
14. Longbiao He, Luming Li, Hongwei Hao, Minsheng Wu, RL Zhou. Grain
refinement and high performance of titanium alloy joint using arc-ultrasonic
gas tungsten arc welding, Science and Technology of Welding and Joining,
2006, 11(1), 72-74.
15. YH Li, Luming Li, FL Meng, WT Zheng, J Zhao, YM Wang. Effect of
substrate temperature on the surface and interface oxidation of NiTi thin films,
Journal of Electron Spectroscopy and Related Phenomena, 2006, 151(2),
144-148.
16. Xing Chen, Luming Li*, Bin Hu, Xiaojie Cui, Yuanhui Deng, DezhiYang, En
Yang. Magnetic evaluation of fatigue damage in train axles without artificial
excitation, Insight, 2006, 48(6), 342-420.
17. Gang Huang, Luming Li, Yiping Cao, Xing Chen. Novel E-style sensor
based on surge eddy current for rough surface crack inspection, Insight, 2006,
48(7), 418-420.
18. Longbiao He, Minsheng Wu, Luming Li, Hongwei Hao. Ultrasonic
generation by exciting electric arc: A tool for grain refinement in welding
process, Applied Physics Letters, 2006, 89(13), 504-505.
19. Yanjun Zhang, Minsheng Wu, Luming Li, Longbiao He. Improving weld
quality of 09MnNiDR steel by using arc-excited ultrasonic, China Welding
(English Edition), 2006, 15(1), 6-10.
20. Vadim Zakirov, Luming Li. Propulsion challenges for small spacecraft: 2005,
Tsinghua Science and Technology, 2006, 11(5), 507-514.
21. Huan Pan, Luming Li, Long Hu, Xiaojie Cui. Continuous aligned polymer
fibers produced by a modified electrospinning method, Polymer, 2006, 47(14),
4091-4094.
22. En Yang, Luming Li*, Xing Chen. Magnetic field aberration induced by cycle
stress, Journal of Magnetism and Magnetic Materials, 2007, 312(1), 72-77.
23. Bin Hu, Gang Chen, Gongtian Shen, Luming Li. Study on the Influencing
Factors of Magnetic Memory Method, APPLIED ELECTROMAGNETICS
AND MECHANICS (II) , 2009, 33, 499-500.
24. Luming Li*, Liqiang Zhong, Xing Chen. Residual stress caused magnetic
field abnormal change upon arc welding joints, International Journal of
Applied Electromagnetics and Mechanics, 2010, 33(3), 1295-1301.
25. Hucheng Zhao, Hasi Agula, Wei Zhang, Fa Wang, Masahiro Sokabe, Luming
Li. Membrane stretch and cytoplasmic Ca2+ independently modulate
stretch-activated BK channel activity, Journal of Biomechanics, 2010, 43(15),
3015-3019.
26. Xiaojie Cui, Luming Li*, Jun Xu, Fu Xu. Fabrication of Continuous Aligned
Polyvinylpyrrolidone Fibers via Electrospinning by Elimination of the Jet
Bending Instability, Journal of Applied Polymer Science, 2010, 116(6),
3676-3681.
27. Liqiang Zhong, Luming Li*, Xing Chen. Magnetic signals of stress
concentration detected in different magnetic environment, Nondestructive
Testing and Evaluation, 2010, 25(2), 161-168.
28. Bin Hu, Luming Li, Xing Chen, Liqiang Zhong. Study on the influencing
factors of magnetic memory method, International Journal of Applied
Electromagnetics and Mechanics, 2010, 33(3), 1351-1357.
29. Yang Cao, Chunhua Hu, Bozhi Ma, Hongwei Hao, Luming Li*, Weiming
Wang. Secure method for software upgrades for implantable medical devices,
Tsinghua Science and Technology, 2010, 15(5), 517-525.
30. Changqing Jiang, Luming Li*, Hongwei Hao. Carbon nanotube yarns for
deep brain stimulation electrode, IEEE Transactions on Neural Systems and
Rehabilitation Engineering, 2011, 19(6), 612-616.
31. Xiaojie Cui, Luming Li*, Fu Xu. Controlled assembly of poly(vinyl
pyrrolidone) fibers through an electric-field-assisted electrospinning method,
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2011,
103(1), 167-172.
32. Hui Yan, Luming Li*, Chunhua Hu, Hao Chen, Hongwei Hao. Astronaut
mass measurement using linear acceleration method and the effect of body
non-rigidity, SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY,
2011, 54(4), 777-782.
33. Chuansen Niu, Hongwei Hao, Jun Lu, Luming Li*, Zhirong Han, Ya Tu. A
Novel Uni-Acupoint Electroacupuncture Stimulation Method for Pain Relief,
EVIDENCE-BASED COMPLEMENTARY AND ALTERNATIVE
MEDICINE, 2011, Article ID 209879.
34. Zhenggan Zhou, Xiansheng Ni, Xiongwei Wen, Luming Li. Application of
Nd: YAG Laser Welding to Implantable Neuro-Stimulator, CHINESE
JOURNAL OF MECHANICAL ENGINEERING, 2011, 24(6), 1103-1110.
35. Xiansheng Ni, Zhenggan Zhou, Xiongwei Wen, Luming Li. The use of
Taguchi method to optimize the laser welding of sealing neuro-stimulator,
Optics and Lasers in Engineering, 2011,49(3), 297-304.
36. Xing Qian, Hongwei Hao, Bozhi Ma, Xiongwei Wen, Chunhua Hu, Luming
Li*, Roy Yuen-chi Lau, Xia Guo. Programmable and implantable
neurostimulator with novel stimulus waveforms for rat models,
ELECTRONICS LETTERS,2012,48(17).
37. Fu Xu, Luming Li*, Xiaojie Cui. Fabrication of Aligned Side-by-Side
TiO2/SnO2 Nanofibers by Dual-Opposite-Spinneret Electrospinning, Journal
of Nanomaterials, 2012, Article ID 575926.
38. Changqing Jiang, Hongwei Hao, Luming Li *. Artifact properties of carbon
nanotube yarn electrode in magnetic resonance imaging, Journal of Neural
Engineering, 2013, 10: 026013.
39. Shaobo Chen, Qingfeng Li, Weiming Wang, Bozhi Ma, Hongwei Hao,
Luming Li*. In Vivo Experimental Study of Thermal Problems for
Rechargeable Neurostimulators, Neuromodulation: Technology at the Neural
Interface, 2013, 16, 436-442.
40. Ying Chen, Hongwei Hao, Yuxing Hu, Luming Li*. Wireless wrist-wearable
wake/sleep identification device for closed-loop deep brain stimulation,
Electronics Letters, 2013, 49(7), 452-453.
41. Zhong Liqiang, Li Luming*, Chen Xing. Simulation of Magnetic Field
Abnormalities Caused by Stress Concentrations, IEEE transactions on
magnetics, 2013, 49(32), 1128-1134.
I. Patents:
1.
ZL01123977.8 “The method use geomagnetic field to detect
Ferromagnetic materials surface defects”
2.
ZL01143444.9 “A method used Arc to Excite Ultrasonic wave”
3.
ZL01143445.7 “ The magnetic detection method of Stress distribution in”
4.
ZL02123442.6 “ A method of detecting geography ferromagnetic pipeline”
5.
ZL03100611.6 “A method of detecting defective activity caused by stress or
fatigue”
6.
ZL200410008468.1 “A method of Ultrasound plasma spraying”
7.
ZL200410009170.2 “A method of Titanium welding base on arc ultrasound ”
8.
ZL200410091183.9 “Electromagnetic pulse excitation resonant screening
method and fixtures”
9.
ZL200420009300.8 “One kind of pulse generator for treatment Parkinson's
disease implanted deep brain stimulation”
10. ZL200510086985.5 “One kind of device and method for electrospinning
occurred and collection”
11. ZL200510116704.6 “An implantable neural electrical stimulation system”
12. ZL200610011112.2 “Two-way wireless communication devices for
implantable medical devices”
13. ZL200610011192.1 “Method of detecting defects in Le injury”
14. ZL200610011552.8 “Implantable medical device software online upgrade
method”
15. ZL200610011809.X “Implantable medical devices percutaneous wireless
charging devices”
16. ZL200610089626.X “Implantable electric acupuncture device”
17. ZL200610113299.7 “A resonator vortex method of detecting surface cracks”
18. ZL200620022817.X “Implantable nerve stimulator electrode catheter”
19. ZL200620022818.4 “The implantable electrical stimulation sealing means”
20. ZL200810000551.2 “The Percutaneous bidirectional wireless communication
device base on pulse Position Modulation Method”
21. ZL200810222815.9 “In vitro-powered implantable medical devices”
22. ZL200810224485.7 “A controller for the patient of implantable medical
devices”
23. ZL200810225432.7 “Single Point Acupuncture Device”
24. ZL200910090047.0 “A respiratory motion feedback training system”
25. ZL200910092206.0 “Dual-channel implantable nerve stimulator”
26. ZL201010293866.8 “Percutaneous closed-loop control of the charging device
for implantable medical devices”
27. ZL201010215107.X “Surface EMG measuring instrument, surface
electromyography measurement module and measuring methods”
28. ZL201010580899.0 “Wireless charging method has aligned position
automatically prompt function for implantable Medical Instruments”
29. CN201110030598.5 “Implantable bioelectrode And its production methods”
30. CN201110074928.0 “Implanted nerve stimulator with a constant voltage /
constant double-pulse mode”
31. ZL201110084267.X “Plexus stimulation system, nerve plexus stimulation”
32. CN201110105062.5 “An extension lead for implantable nerve stimulation
system”
33. CN201110231234.3 “Implantable bioelectrode and include medical
component of the electrode”
34. CN201110309956.6 “Temperature closed-loop control device and test
methods”
35. ZL201120096646.6 “Nerves stimulation system and nerve stimulator”
36. ZL201120125356.X “An extension lead for implantable nerve stimulation
system”
37. ZL201130017148.3 “In vitro wireless charger for implantable
neurostimulator”
38. ZL201130017149.8 “External control box for implantable neurostimulator”
39. ZL201130017150.0 “Patients with controller for implantable
neurostimulator”
40. ZL201130171910.3 “nerve stimulator”
41. ZL201210097716.9 “Epilepsy detection and intervention device based on
EEG”
42. CN201210097718.8 “Integrated closed-loop deep brain stimulator Based on
the detection of sleep”
43. CN201210183919.X “Wireless communication device for implantable
medical devices”
44. CN201210249175.7 “Test stimulator used in vitro”
45. CN201220350205.9 “Test stimulator used in vitro”
46. ZL201230305464.5 “Test stimulator”
47. CN201210336920.1 “Feedthrough connector and method of manufacture for
implantable medical devices”
48. CN201210330922.X “Implanted electrodes andits preparation method, the
electrode medical components”
49. CN201210402736.2 “Ceramic feedthrough connector and its manufacturing
method for implantable electrical stimulator”
50. CN201310018097.4 “Remote monitoring system for implantable medical
devices”
51. US13/749653 “Implantable lead and medical device using the same”
52. US13/749649 “Methods for making implantable lead and medical device”
53. CN201310469961.2 “One kind of percutaneous wireless charging devices
with AM FM function for implantable medical devices”
54. CN201310561653.2 “Medical instrument mounting means”
55. CN201330526657.8 “ Control Magnet”
56. CN201310538102.4 “ Wireless programmable implantable medical device
system”
57. CN201310500890.8 “ Nerve stimulator connected system fatigue life tester”
J. Invited Lectures:
2014
1.
Peking Union Medical Hospital Forum on Neuromodulation, Jan. 2014
2013
1. International Workshop on Biomedical and Nano-micro Engineering related to
Flow Dynamics, Invited and Session Chair, Jan. 2013
2. Forum of Chinese Engineering Academy on Medical Equipment, April, 2013
3. Tiantan Forum on Functional Neurosurgery, May, 2013
4. Harbin Forum on Epilepsy Neurosurgery, Jun. 2013
5. CBME013, Oct.2013
2012
1. Japan-China Joint Workshop on Bio, Material and Flow Dynamics, Feb. 2012
2. Shanghai Emerging MediTech Symposium 2012, Mar. 2012
3. The 3rd Maintenance & Interdisciplinary Science Summer School, Jul. 2012.
4. The Third Chinese Neuromodulation Conference, Sep. 2012
5.
Eastern Forum on Science and Technology, Oct. 2012
Before 2011(selected)
1. Tsinghua-Tiantan Forum on Clinical Neuroscience, Mar. 2011
2. The Second Chinese Neuromodulation Conference, Nov. 2011
3. The First Asian Congress of Neuromodulation Congress. Invited and
Co-President, 2010.
4.
2nd International Conference on Neuroprosthetic Devices, 2010.2-27-28
(ICNPD-2010), 2010.
5.
14th international syposum of applied magnetics and mechanics, 2009.
6.
BioEco, 2009.
7.
17th World Conference on NDT, Chair Technical Session, 2008.
8.
2008 Far East Forum on Nondestructive Testing, 2008.
9.
Life Science Partnering China Europe, Shanghai, 16-18, 2007.
Download