PGL7 LED
LED Parking Garage Luminaire
revision 6/19/15 • kl_pgl7led_spec.pdf
Type:
Job:
Approvals:
Fixture Catalog number:
/
/
/
Fixture
Current
Electrical Module
See page 2
Optional Features
See page 3-4
Specifications
Speed Mount: Electro-zinc plated steel for mounting to standard
4” junction box or mud-box. Fixture hangs from hooks to free both hands to
make field wire connections. Allows tool-free fixture mounting to junction
box, with integral anti-theft lock.
PGL7-LED
60 Light Emitting Diodes
65 System Watts for 350mA
84 System Watts for 450mA
Maximum Weight = 19 lbs
Electrical Housing: Die-cast, low copper (<0.6% Cu) aluminum alloy
for direct mounting to the Kim Speed Mount. Wire entries are sealed by a
silicone grommet.
Refractor: Standard refractor is one-piece injection molded acrylic, .125”
minimum wall thickness. The prisms around the perimeter refract the spill
light off each PicoEmitter™ upward to eliminate the cave effect. Refractor
attaches to electrical housing with (2) load bearing retainers. Perimeter is
fully sealed with a one-piece extruded silicone gasket, with the ends fused
together to form a continuous piece, sealing the refractor to the electrical
housing, and providing an IP66 fixture rating.
18" DIA.
(457 mm)
4"
(102 mm)
3K"
7K"
(191 mm)
(89 mm)
(254 mm)
4J"
(108 mm)
8J"
(210 mm)
11L"
(299 mm)
ACRYLIC
11L"
(299 mm)
LEXAN® Option
Fixture with Optional Balanced Pendant
J-Box and Bird Shroud (PB2)
Patent Pending
EmitterDeck® : Precision injection molded optics are positioned to achieve
directional control toward desired task. The entire assembly fastens to the
housing as a one-piece module.
Electronic Module: All electrical components are UL recognized and
mounted directly to the electrical housing for maximum heat dissipation.
Module includes a driver, thermal control device and surge protector.
Driver is rated for -40°C operation. A step-down transformer within the
housing may be used for 347V and 480V systems. All luminaires include
an internal fuse.
Fixture with Standard Acrylic Refractor
10" DIA.
Date:
Page: 1 of 5
Finish: Standard finish on fixture electrical housing, optional PB2
and TB2, is (PS) Platinum Silver. Platinum Silver is Powdura® TGIC powder
coat paint.
Listed to: UL 1598 Standard for Luminaires - UL 8750 Standard for Safety
for Light Emitting Diode (LED) Equipment for use in Lighting Products and
CSA C22.2#250.0 Luminaires.
Warranty: Kim Lighting warrants PGL7 LED products (“Product(s)”) sold by
Kim Lighting to be free from defects in material and workmanship for (i) a
period of five (5) years for metal parts, (ii) a period of ten (10) years for exterior housing paint finish(s), (iii) a period of six (6) years for LED Light Engines
(PicoEmitters) and, (iv) a period of five (5) years for LED power components
(LED Driver, LifeShield® device, Surge Protector), from the date of sale of
such goods to the buyer as specified in Kim Lighting shipment documents
for each product.
CAUTION: Fixtures must be grounded in accordance with national,
state and/or local electrical codes. Failure to do so may result in serious
personal injury.
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2015 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
PGL7 LED
LED Parking Garage Luminaire
revision 6/19/15 • kl_pgl7led_spec.pdf
Page: 2 of 5
Type:
Job:
Standard Features
Fixture
Cat. Nos. for optical distributions
Cat. No. designates PGL
fixture with Wide or Narrow
optical distribution
PGL71
Type V
Square
Wide = 70° Peak
Intensity Angle
Narrow = 57.5° Peak
Intensity Angle
Wide DOWN
LIGHT
Current
l PGL71W
Exx 60LxK xxx
71N
DOWN
LIGHT
Driving Direction
Driving Direction
l PGL74W
l PGL74N
74W
Current:
l E35 = 350mA
l E45 = 450mA
Type Volts
l PGL71N
DOWN
LIGHT
Cat. Nos. for Electrical Modules available:
Exx
60L
xK
Lamp Line
Driving Direction
71W
Light Emitting Diodes
DOWN
LIGHT
Driving Direction
PGL74
Type III
Electrical Module
Narrow
Source:
60L=60 LEDs
Color Temperature:
l 2K = 580nm Amber
l 3K = 3000K
l 4K = 4200K
l 5K = 5100K
74N
xxx
Voltage:
l 120 = 120V
l 208 = 208V
l 240 = 240V
l 277 = 277V
l 347 = 347V1
l 480 = 480V1
Due to current unavailability of 347V and 480V drivers, specification of these voltages
may feature an integral step-down transformer.
1
0-10V Dimming Interface
Driver has a 0-10V dimming interface with a dimming range of 10-100%. Approved dimmers include
Lutron Diva AVTV, Lutron Nova NFTV and NTFTV. Note: Not compatible with current sourcing dimmers.
Fixture Housing
Dimming Lead (+)
40 mA Max
LifeShield®
5V
Dimming Lead (-)
Driver
Fixture Equivalent Circuit
© 2015 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
PGL7 LED
LED Parking Garage Luminaire
revision 6/19/15 • kl_pgl7led_spec.pdf
Type:
Job:
Page: 3 of 5
Optional Features
Finish
Platinum Silver is Powdura
TGIC powder coat paint.
All other colors are TGIC
powder coat paint.
®
Color:
Platinum Silver White
Custom Color1
(Standard)
l WH
Cat. No.: l PS
l CC
1
Custom colors subject to additional charges, minimum quantities and extended lead times.
Consult representative. Custom color description:
Neighbor Friendly Optic:
Cat. No.  NFO
 No Option
Integrated Neighbor Friendly Optic on each PicoEmitter™ module
to completely control unwanted backlight. Most effective with
Type III.
Polycarbonate Refractor
Lens
Injection molded UV stabilized polycarbonate has the same prism design as
the standard acrylic. The polycarbonate refractor lens decreases the luminaire
efficiency, and has a different index of refraction than the acrylic material, as a result,
moderately altering beam angles and candela.
Cat. No.
l LS
l No Option
Semi-Diffused
Refractor Lens
Cat. No.  ASOL
Acrylic
 LSOL
Polycarbonate
 No Option
Fusing
Cat. No.
(see right)
l No Option
Balanced Pendant J-Box
and Bird Shroud
Cat. No.
l PB2PS
Platinum Silver
(Std PGL7 finish)
TYPE I
TYPE II
TYPE III
TYPE III -NFO
NOTE: Standard lens is acrylic.
Polycarbonate
Refractor Lens
The semi-diffused refractor lens is a one-piece injection molded acrylic or
polycarbonate lens, .125” minimum wall thickness. The lens option softens the light
output and reduces glare from direct views of the optical system. The semi-diffused
lens decreases the luminaire efficiency, and has a different index of refraction than
the standard, clear acrylic or clear polycarbonate. As a result, moderately altering
beam angles and candela.
Semi-Diffused
Refractor Lens
High temperature fuse holders factory installed inside the fixture housing.
Fuse included.
Line Volts:
Cat. No.:
120V
l SF
208V
l DF
240V
l DF
277V
l SF
347V
l SF
Die-cast aluminum. Offset L" NPT pendant entry to balance
fixture in free-swinging installation. Conduit pipe provided by
others. The Kim Speed Mount is furnished for fixture attachment to
the PB2. This option is shipped separate from fixture.
Custom Color
480V
l DF
Balanced
Pendant
J-Box
and Bird
Shroud
© 2015 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
Single Fuse
TYPE IV
Forward
Throw
T
PGL7 LED
LED Parking Garage Luminaire
revision 6/19/15 • kl_pgl7led_spec.pdf
Type:
Job:
Page: 4 of 5
Occupancy Sensors
Smart Control
Cat. No. l SCO
l SCP
l No Option
3G"
The occupancy sensor device and aluminum enclosure is factory
installed onto the electrical housing.
SCO (On/Off control) - No light output when no motion detected.
SCP (High/Low Control) – User programmable settings of 70, 60,
50, 20% of power. Factory default is 50%. PGL7 driver is a 0-10V
dimming interface.
(87 mm)
5"
(127mm)
Limelight Parking Garage Control System
Limelight Radio and
Occupancy Sensor Module.
Cat. No.
l LLCM
Specification: 120-277 VAC, RF ZigBee transceiver, and PIR
sensor. Mounted to a cast aluminum bowl on the outside of the
Parking Garage Luminaire to assure temperature sensitivity of
electronic components is within specification.
3G"
(87 mm)
5"
(127mm)
Limelight Ethernet
Gateway Hardware.
Cat. No.
l LLGWT-03
Limelight Cellular
Gateway Hardware.
Cat. No.
l LLGWT-04
Group Software and
Commissioning for up
to 100 Luminaires.
Cat. No.
l LLSC-100
Software and Commissioning for each luminaire over
the 100 Unit threshold.
Cat. No.
l LLSC-1
High density RF Mesh coordinator, software proprietor, manifest
holder of fixture ID’s groupings and events. Tamper proof,
NEMA 5-15 3 prong SJEOOW power cord, water tight Ethernet
connections. Highly protected, long life AC/DC power supply.
Single board, ARM compliant 520Mhz Intel computer,
ZigBEE OEM RF coordinator.
Limelight Cellular Gateway Hardware. High density RF Mesh
coordinator, software proprietor, manifest holder of fixture
ID’s groupings and events. Tamper proof, NEMA 5-15 3 prong
SJEOOW power cord. Highly protected, long life AC/DC power
supply. Single board, ARM compliant 520Mhz Intel computer,
ZigBEE OEM RF coordinator.
Limelight Software and Commissioning. Limelight’s exclusive
system WEB software and Cloud Hosting Service. Graphic user
interface includes facility layout and luminaire locations for
remote diagnostic testing and customer/engineering interface on
control plan. Commissioning includes the development of the
initial lighting groups and event planning as well as the calibration
of light harvesting schedules. A final commissioning report and
user guide shall be provided. On-Site Commissioning Services
provided for full functional prove-out of the enabled luminaires,
mapping of all luminaires to custom graphic interface, occupancy
sensor performance verification, and visual calibration of light
harvesting events. Owner/Operator orientation and training with
user guide. The first year of annual support is provided which
includes 24/7 WEB access to Limelight tools www.limelighttools.
com, cloud hosting, technical support, maintenance software
updates, email alert notifications, and annual management
reporting. Future annual support provided by Limelight under
an annual fee contract.
© 2015 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
PGL7 LED
LED Parking Garage Luminaire
revision 6/19/15 • kl_pgl7led_spec.pdf
Type:
Job:
Page: 5 of 5
Lumen Data
Projected Lumen Maintenance
Spectroradiometric
3000K
4200K
5100K
2800K-3175K
3800K-4600K
4600K-5600K
Color Rendering Index (CRI)
≥75
≥70
≥65
Power Factor@ 120V
>.90
>.90
>.90
Correlated Color Temp. CCT (K)
mA
50,000 hrs
100,000 hrs
350 mA
96.74%
94.63%
450 mA
95.71%
92.62%
Electrical Drive Current
350mA
450mA
Volts - AC
Amps - AC
System Watts
Amps - AC
System Watts
120
0.54
65
0.70
84
208
0.31
65
0.40
84
240
0.27
65
0.35
84
277
0.23
65
0.30
84
347
0.19
65
0.24
84
480
0.14
65
0.18
84
B.U.G. RATING (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare
Temperature
Driver Current(mA)
PGL71W/A
PGL71N/A
PGL74W/A
PGL74W/NFO/A
PGL74N/A
PGL74N/NFO/A
3000K
B3 U2 G1
B3 U2 G1
B1 U2 G2
B1 U2 G1
B1 U2 G1
B1 U1 G1
4200K
B3 U2 G1
B3 U2 G1
B2 U2 G2
B1 U2 G2
B1 U2 G1
B1 U1 G1
B3 U2 G2
B3 U2 G1
B2 U2 G2
B1 U2 G2
B1 U2 G1
B1 U1 G1
B3 U2 G1
B3 U2 G1
B2 U2 G2
B1 U2 G2
B1 U2 G1
B1 U1 G1
B3 U2 G2
B3 U2 G1
B2 U2 G2
B2 U2 G2
B2 U2 G2
B1 U1 G1
B3 U2 G2
B3 U2 G1
B2 U2 G2
B2 U2 G2
B2 U2 G2
B1 U1 G1
PGL71W/A
PGL71N/A
PGL74W/A
PGL74W/NFO/A
PGL74N/A
PGL74N/NFO/A
5148
5526
5197
4273
5635
5030
6304
6740
6296
5212
6873
6134
5100K
6901
7271
6838
5623
7415
6618
3000K
5919
6333
5894
4935
6453
5778
7370
7886
7032
6145
8036
7195
7788
8333
7677
6493
8491
7603
350
5100K
3000K
4200K
450
5100K
Absolute Lumens
Temperature
Driver Current(mA)
3000K
4200K
4200K
5100K
350
450
LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim
Lighting’s IES File Library.For custom optics and color temperature configurations, contact factory.
© 2015 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716