[] PANDUCT Type FL

advertisement
ELECTRICAL GROUP
PANDUCT ® Wiring D
PANDUCT ® Type FL—Flexible Wiring Duct
PANDUCT Flexible Wiring Duct is a slotted sidewall, open finger
design wiring duct to route and protect wires installed in control
panel applications that require flexibility.
• Flexibility—duct can be bent and twisted without breaking
or cracking
• Low smoke, halogen free polypropylene material with
UL94V-0 flammability rating
• Offset fingers are angled downward towards center for
easy insertion and removal of wires
• One piece design with fully enclosing fingers—no cover
needed
• Factory applied adhesive tape provided for easy mounting
technical information
Material:
Low Smoke Halogen Free Polypropylene
Flammability:
UL94V-0
Approvals:
CSA Certified
Color:
RAL 7032 Gray/Green
features, advantages and benefits
Flexibility
Can be positioned at extreme angles, around
corners, and on hinged openings.
Can be used in applications where
conventional PVC duct cannot
Low smoke, halogen
free polypropylene
material with UL94V-0
flammability rating
High level of flame retardancy
No harmful toxic bromine, chlorine, or flourine
Emits less smoke when burned than PVC
Meets most global safety and environmental
standards for commercial buildings and public
transportation (i.e. subways)
Offset, angled fingers
Easy wire insertion and removal
Symmetrical design allows wire lead in from
both sides
Reduces installation time compared to
conventional overlapping finger design
Modifications/additions are easy
One piece design with
enclosing fingers
No cover required
Reduced number of parts needed for
installation
Simplifies insertion and removal of wiring
Wires won't fall out once installed
Reduces number of parts needed to stock
Wirefill Capacity
12 AWG
.122
THHN
5
12x12
0.240
10 AWG
.153
THHN
3
25x25
0.969
12
19
50x50
3.881
43
67
Nominal
Duct Size
(mm)
Area
in2
Part Number
Duct External Dimensions
(B x H)
FL12X12GR-A
0.49x0.49 in. (12.5x12.5mm)
FL25X25GR-A
0.98x0.98 in. (25x25mm)
FL50X50GR-A
1.97x1.97 in. (50x50mm)
flexible duct dimensions
Standard
Pkg
Quantity
.24 in. (25mm)
112 pcs.
19.7 in.
(500mm)
.58 in. (14.7mm)
70 pcs.
.58 in. (14.7mm) x 2
32 pcs.
See above chart for dimensions
.16
(4.00)
.98
TYP
(25.00)
.49
(12.50)
Tape
Width
(W)
Standard
Length
FL50X50GR-A
2 Strips of Tape
FL12X12GR-A & FL25X25GR-A
Tape Centered
H
.08 R
(2.00)
CENTERED
SLOT DETAIL
SCALE: FULL
.98
TYP
(25.00)
.98
(25.00)
W
X2
B
W
.31
(8.00)
19.69
(500.00)
Sizes 25 x 25 and 50 x 50: 39 FULL SLOTS TOTAL (20 HORIZONTAL - 19 VERTICAL)
Size 12 x 12: 20 HORIZONTAL SLOTS ONLY
Dimensions are in inches (Dimensions in parentheses are metric)
installation tools
PANDUCT ® TNR Nylon Rivet Installation Tool
for use with NR1 Nylon Rivet
PANDUCT DCT - Cutting Tool
Condensed Full Line
Electrical Catalog
PANDUCT ®
Wiring Duct and
Accessories
PAN-CODE ™
Identification and Lblg
Solutions Products
Cable Ties and
Wiring Accessories
SA101N13J
SA101N64D-LP
SA114N315B-ID
SA101N275C-WC
Our products are warranted to be free from defects in material and workmanship at the time of sale but our
obligation under this warranty is limited to the replacement of any product proved to be defective within 6
months (for product) or 90 days (for tools) from the date of delivery. Tool warranty is void if Panduit tools
are modified, altered or misused in any way. Use of Panduit tooling with any product other than the specified Panduit products for which the tool was designed, constitutes misuse. Before using, user shall determine the suitability of the product for his intended use and user assumes all risk and liability whatsoever in
connection therewith.
ELECTRICAL GROUP
PANDUIT CANADA
Div. of PANDUIT CORP.
Markham, Ontario
Phone: 905-475-6922
EUROPEAN HEADQUARTERS
PANDUIT EUROPE LTD.
London, UK
Phone: 44(0) 208-601-7200
WORLD HEADQUARTERS
PANDUIT CORP.
Tinley Park, Illinois, USA
Phone: 800-777-3300, ext. 8287
708-532-1800, ext. 8287
Fax: 815-836-0551
Email: info@panduit.com
Internet: www.panduit.com/eeg
ASIAN HEADQUARTERS
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
Phone: (65) 379 6700
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
This warranty is made in lieu of and excludes all other warranties, expressed or implied. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE ARE SPECIFICALLY EXCLUDED.
Neither seller nor manufacturer shall be liable for any other injury, loss or damage whether direct or consequential, arising out of the use of, or the inability to use, the product.
The information contained in this literature is based on our experience to date and is believed to be reliable.
It is intended as a guide for use by persons having technical skill at their own discretion and risk. We do not
guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein
are for reference purposes only. For specific dimensional requirements consult the factory. This publication is
not be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc.
For Pricing and Further Information —
Contact your local PANDUIT
Distributor or Sales Office
PANDUIT CORP.
Japan Branch
Phone (81) (3) 3767-7011
PANDUIT MEXICO/LATIN AMERICA
& CARIBBEAN
Phone: (52) 3 666-2501
© PANDUIT Corp. 2001
ALL RIGHTS RESERVED
PANDUIT (AUST.) PTY. LTD.
Phone: (61) 3-9794 9020
SA-EL05CB01A
Printed in U.S.A.
Download