MP-8 SERIES
CONVENTIONAL FIRE
ALARM CONTROL
PANELS
Economical solution for small sites, where
simple and reliable fire alarm system is
required. Approved by Kazakhstan and
Oman Civil Defence authorities.
Highlights
2, 4 or 8 zone models
Zonal Fire and Fault LED indicators
MP-8 Fire Alarm Control Panel
Button control key
Zone Test and Zone Disable modes
Zone location text on front panel
Highlights
Soft-touch buttons
Microprocessor-controlled
PCBs made by use of Surface Mount
Technology
1 supervised sounder output
2 relay outputs
Compatible with all popular
conventional fire detectors
Protection against electromagnetic
interference
Optional repeater panels
Optional relay modules
Auxiliary power supply output
LED test by use of single button
Built-in silenceable buzzer
Panel capacity
Each zone can host max. 20 fire detectors
and unlimited number of manual call points,
thus allowing the system to have a
protection area consisting of max. 160 (in
8 zone models) fire detectors. The zones
are monitored for open and short circuits,
indicated on the front panel. The panel
supports all standard conventional fire
detectors. For best performance, MaviGard
MG-2000 series fire detectors are
recommended.
Zone programmability
Zones can be set to Disable and Test
Modes. On the Test Mode, manually
initiated fire alarm is reset automatically
after a few seconds; this allows testing
zones by one person without need for
returning to the panel for reset.
Panel outputs
Panels are equipped with 1 supervised
sounder output. Connecting MG-5000
series sounders and bells to the output is
recommended for best performance. The
output can host 16 MG-5000 Sounders, 8
MG-5200 Sounder Strobes or 20 MG-5400
Fire Alarm Bells.
Fire and Fault relays enable wide applicability
for remote control and signaling on various
system conditions.
27
Panels have an auxiliary 24V power supply
output for energizing external devices, such
as telephone dialers or gas detectors.
Conditions indication
Zonal Fire and Faults are displayed by
separate LEDs located on the front panel.
Controls
Panels have 4 buttons, including Lamp Test,
which allows single-push testing of all LEDs
on the front panel. Button Control Key
prevents unauthorised control of the panel.
Panel menu and front panel have versions
in 3 languages: Turkish, English and Russian.
Power supply
Panel power supply is under continuous
monitoring. Batteries are charged
automatically and charging is cut off when
necessary level is reached. Power supply
faults are displayed by related LEDs on
front panel.
Networking
Optional repeater panels allow full
replication of system information and
control. By use of optional relay modules,
a relay output can be assigned to each
zone.
Auxiliary power supply output:
0.5A 24V DC, self-reseting fuse
protected
Sounder output:
0.5A 24V DC, supervised, selfresetting fuse protected, end-of-line
resistor 10kW
Fire relay:
1A 30V DC, volt free changeover
Fault relay:
1A 30V DC, volt free changeover
Controls
Zones:
up to 8 inputs, 24V DC, supervised, end-of-line
resistor 6.8kW, connecting MG-2000 series fire
detectors and MG-5100 series MCPs is
recommended
System status and fault LEDs
Zone location text
Zonal Fire and Fault LEDs
Mains power supply : 220V AC 50 Hz, 2A glass type fuse protected
Operating voltage : 24V DC
Power supply : 1.5A
Batteries : 2x(12V DC 7Ah)
Construction : Panel cabinet: 1.2mm sheet steel, front panel: 1.5mm sheet steel, plastic
cover
Finish : Epoxy powder coat
Mounting : Surface
Standard colour : Panel cabinet: grey, front panel and cover: white
Operating ambient temperature : (-10°C) - (+55°C)
Operating ambient humidity : 0-95% (non-condensing)
Size : 400x300x100mm
Weight : 3.8kg (approx., without batteries)
Product
Code
Zones
MP-82
2
MP-84
4
MP-88
8
28