152866 3/2-way roller lever valve, normally closed RS: 2 1 ROS: 3 2 1 3 Design The 3/2-way roller lever valve with push-in elbow fittings is screwed onto a polymer base the unit is mounted on the profile plate via a rotary detent system with blue triple grip nut (mounting alternative "B"). Function The valve is actuated by pressing the roller lever e.g. by means of cylinder trip cam. The valve is returned to the normal position via return spring after release of the roller lever. Modification This valve can be changed from “normally closed” (RS valve type) to “normally open” (ROS valve type). Normally closed (RS valve type) Actuator attachment at the left (number 1 on the actuator attachment above number 1 on housing) 1 2 Technical data Normally open (ROS valve type) Actuator attachment at the right (number 2 on the actuator attachment above number 2 on housing) Pneumatic Medium Compressed air, filtered (lubricated or unlubricated) Design Poppet valve, directly actuated on one side, with return spring Pressure range 350 – 800 kPa (3,5 – 8 bar) Standard nominal flow rate 1...2 120 l/min Actuating force at 600 kPa (6 bar) 1,8 N Connection QSML-1/8-4 fittings for plastic tubing PUN 4 x 0.75 © Festo Didactic GmbH & Co. KG, 02/2009 Subject to change 1/1 © Festo Didactic GmbH & Co. KG, 02/2009