the essential guide
to reinforcing concrete
Bar & fabric products
Spacers & accessories
Slab products
Formwork
Weldmesh and gabions
2007
We reserve the right to substitute any product described in this catalogue with a similar product of the same or better quality
without prior notice. Similarly, products supplied may differ from the profiles illustrated, but will offer the same functionality.
Please note: drawings are for reference only and are not to scale. Usage information, where offered, is for guidance only.
Errors and omissions excepted. March 2006.
the essential guide to reinforcing concrete
Bar & fabric
products
p5-15
Spacers &
accessories
p16-19
Slab products
p20-26
Formwork
p27-29
Weldmesh
& gabions
p30-31
Customer service, quality systems,
technical support, competitive prices
BRC is the UK’s largest supplier of steel reinforcement
and associated products for concrete. With a network
of strategically placed manufacturing locations, we are
able to meet all your requirements regardless of the
size of project.
We have tried to make this catalogue as comprehensive as
possible, but cannot include every single item from our huge
product range. So, if you do not see the product you are looking
for, please give us a call. You
will find contact numbers for
all our sales offices at the
bottom of every page.
Contract
management
A nationwide network
of dedicated,
professional teams
monitor the
flow of information
from site call-off,
through manufacturing
to point of delivery, to
ensure that your
requirements are
fully met.
■ Quality Management
systems to
BS EN ISO 9001:2000
■ National coverage
■ CARES approved
at all locations
■ After sales support
■ Dedicated contract
management
■ Technical support
■ Capacity to handle
all sizes of project
■ Competitive pricing
■ Commitment to total
customer service
850303
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Bar & fabric products
Cut and bent reinforcement
■ High yield reinforcing bar to BS4449:2005 in diameters 8mm to 40mm*.
■ 6mm and 50mm are non-preferred sizes available to special order.
■ Strategically placed manufacturing and distribution locations throughout the UK.
■ All cut and bent reinforcement conforms to the relevant British Standard.
850303
* BS4449:2005 does not cover mild steel
®
BARWELD
Prefabricated reinforcement
BRC offer a prefabricated solution tailored to suit individual needs. Whether it is to speed construction or solve skill shortages, BRC
can provide the answer. By recognising that the skill level on sites will vary, BRC are able to offer a solution that can be easily applied.
Housing
Industrial and piled foundations
■ A range of
■ Heavy duty
solutions are
available to suit
site skill levels.
solutions.
■ A range of splice
details are
available.
■ Can be supplied
in packages for
ease of planning.
■ Beam sizes can be
detailed to suit
lifting equipment.
Bases and pile caps
Bar mats
■ Single piece
■ Heavy bars
units for speed
of placing.
can be converted
to mats for faster
construction
cycles.
■ Larger units can
be supplied in
sections.
■ Sheet sizes can
be detailed to
suit specific
applications.
■ Pile cages are
also available.
Reinforcement solutions
The pressures of today’s construction industry continue to require
innovative solutions. Skill shortages, confined sites and the
demands for faster construction, all need clear thinking.
BRC have accumulated a wealth of experience in this field, and can support you
through all stages from design to construction. Our engineering teams will work
with you to identify a solution that meets your needs.
For projects ranging from a house extension to a high-rise apartment scheme,
we can offer an extensive package utilising those products and services that will
give you the best result.
To explore the opportunity to save time and money, please contact your local BRC sales office
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
5
Bar & fabric products
Reinforcement shape codes to BS8666:2005
Stock lengths
(C)
Semi-circular
A
B
A
R
A
A
A
L=A
L=A
L=A + (B) – 0.5r – d
L=A + (B) – 0.43R – 1.2d
L=A + 0.57B + (C) – 1.6d
SHAPE CODE 00
SHAPE CODE 01
SHAPE CODE 11
SHAPE CODE 12
SHAPE CODE 13
(B)
(B)
B
A
A
A
B
B
A
(C)
Semi-circular
A
C
(C)
B
(C)
(D)
(C)
B
L=A + (C) - 4d
L=A + (C)
L=A + B + (C) – r – 2d
L=A + B + C + (D) – 1.5r – 3d
L=A + B + (C) – r – 2d
SHAPE CODE 14
SHAPE CODE 15
SHAPE CODE 21
SHAPE CODE 22
SHAPE CODE 23
B
(C)
B
(C)
A
B
B
C
D
(C)
A
A
D
D
(C)
D
B
D
A
A
(E)
L=A + B + (C)
L=A + B + (E)
L=A + B + (C)
L=A + B + (C) – 0.5r – d
L=A + B + (C) – 0.5r – d
SHAPE CODE 24
SHAPE CODE 25
SHAPE CODE 26
SHAPE CODE 27
SHAPE CODE 28
A
(C)
C
(C)
A
B
B
B
D
(D)
Semicircular
(E)
B
B
D
(D)
A
C
A
C
A
L=A + B + (C) – r – 2d
L=A + B + C + (D) – 1.5r – 3d
L=A + B + C + (D) – 1.5r – 3d
L=2A + 1.7B + 2(C) – 4d
L=A + B + C + (E) – 0.5r – d
SHAPE CODE 29
SHAPE CODE 31
SHAPE CODE 32
SHAPE CODE 33
SHAPE CODE 34
A
(D)
C
(E)
A
C
(E)
B
D
E
D
(E)
A
A
(E)
B
A
B
B
D
D
D
C
C
B
B
C
L=A + B + C + (E) – 0.5r – d
L=A + B + C + (D) – r – 2d
L=A + B + C + D + (E) – 2r – 4d
L=A + B + C + D + (E) – 2r – 4d
L=A + 2B + C + (E)
SHAPE CODE 35
SHAPE CODE 36
SHAPE CODE 41
SHAPE CODE 44
SHAPE CODE 46
C
(C)
(C)
A
(D)
D
(D)
(E)
B
B
D
B
(F)
A
(D)
A
B
A
(C)
C
(F)
B
A
E
L=2A + B + 2(C) + 1.5r – 3d
L=2(A + B + (C)) – 2.5r – 5d
L=A + B + C + D + 2(E) - 2.5r - 5d
L=2A + 3B + 2(C) – 3r – 6d
L=A + B + C + 2D+E + (F) – 3r – 6d
SHAPE CODE 47
SHAPE CODE 51
SHAPE CODE 56
SHAPE CODE 63
SHAPE CODE 64
A
A
C
A
B
B
B
B
(D)
A
R
(B)
B is the overlap
L=A
L=π (A–d) + B
L=Cπ(A – d)
L=A + 2B + C + (D) – 2r – 4d
SHAPE CODE 67
SHAPE CODE 75
SHAPE CODE 77
SHAPE CODE 98
C = number of turns
Table of minimum dimensions
5d P
(B)
C
All other shapes are
Shape Code 99 and
require fully dimensioned
sketches.
Isometric sketch
Nominal
size
Minimum radius
for scheduling
Minimum diameter
for bending former
6*
8
10
12
16
20
25
32
40
50 *
12
16
20
24
32
70
87
112
140
175
24
32
40
48
64
140
175
224
280
350
850303
Minimum end projection (P)
General
Links where
(min. 5d straight) bend <150°
(min.10d straight)
110
110
115
115
120
130
125
160
130
210
190
290
240
365
305
465
380
580
475
725
*6mm and 50mm are non-preferred sizes available to special order
Sales offices:
6
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Bar & fabric products
Reinforcing bar technical data
Weight per m2 in one direction (add both directions for total m2 weight)
BAR SIZE SPACING OF BARS (mm)
(mm)
75
100
125
150
175
6*
2.959
2.220
1.776
1.480
1.268
8
5.261
3.946
3.157
2.631
2.255
10
8.220
6.165
4.932
4.110
3.523
12
11.838
8.878
7.103
5.919
5.073
16
21.044
15.783
12.627
10.522
9.019
20
32.882
24.661
19.729
16.441
14.092
25
51.378
38.534
30.827
25.689
22.019
32
84.178
63.133
50.507
42.089
36.076
40
131.528
98.646
78.917
65.764
56.369
50 *
205.512
154.134
123.307
102.756
88.077
*6mm and 50mm are non-preferred sizes available to special order
200
225
250
275
1.110
1.973
3.083
4.439
7.892
12.331
19.267
31.567
49.323
77.067
0.986
1.754
2.740
3.946
7.015
10.961
17.126
28.059
43.843
68.504
0.888
1.578
2.466
3.551
6.313
9.865
15.413
25.253
39.458
61.654
0.807
1.435
2.242
3.228
5.739
8.968
14.012
22.958
35.871
56.049
300
0.740
1.315
2.055
2.959
5.261
8.220
12.845
21.044
32.882
51.378
Sectional area (mm2) of bars per metre width for various c/c (mm)
C/C (mm)
75
100
125
150
175
200
250
300
350
400
450
500
6*
8
10
12
16
20
25
32
40
50*
377
283
226
189
162
142
113
94.3
80.9
70.8
62.9
56.6
671
503
402
335
287
252
201
168
144
126
112
101
1050
785
628
523
449
393
314
262
224
196
174
157
1510
1130
905
754
646
566
452
377
323
283
251
226
2680
2010
1610
1340
1150
1010
804
670
575
503
447
402
4190
3140
2510
2090
1800
1570
1260
1050
898
786
698
628
6550
4910
3930
3270
2810
2450
1960
1640
1400
1230
1090
982
10700
8040
6430
5360
4600
4020
3220
2680
2300
2010
1790
1610
——12600
10100
8380
7180
6280
5030
4190
3590
3140
2790
2510
————15700
13100
11200
9820
7850
6540
5610
4910
4360
3930
40
50*
*6mm and 50mm are non-preferred sizes available to special order
Properties of high yield bars
Size (mm)
6*
Dims (max O/A mm)
8
10
12
16
20
25
32
7
10
12
14
19
23
29
37
46
58
Mass (kg per m)
0.222
0.395
0.616
0.888
1.579
2.466
3.854
6.313
9.864
15.413
Metres per tonne
4504
2531
1623
1126
633
405
259
158
101
64
*6mm and 50mm are non-preferred sizes available to special order
Radius of bending
Reinforcement to be formed to a radius exceeding that specified in the table below shall be supplied straight. The required curvature
may be obtained during placing. For shapes with straight and curved lengths (e.g. shape codes 13 and 33) the largest practical radius
for the production of a continuous curve is 200mm, and for larger radii the curve may be produced by a series of short straight
sections.
Bar size (mm)
Radius (m)
6*
2.50
8
2.75
10
3.50
12
4.25
16
7.50
20
14.00
25
30.00
32
43.00
40
58.00
50*
75.00
*6mm and 50mm are non-preferred sizes available to special order
Tolerances on cutting & bending dimensions
The tolerances for cutting and/or bending dimensions shall be in
accordance with the table to the right and shall be taken into
account when completing the schedule. The end anchorage or the
dimension in parentheses in the shape codes specified in the table
opposite shall be used to allow for any permissible deviations
resulting from cutting and bending.
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
Cutting & bending tolerances
Cutting of straight lengths
Tolerance (mm)
(incl. reinforcement for subsequent bending) +25 -25
Bending ≤ 1000mm
> 1000mm to ≤2000mm
> 2000mm
0161 620 1001
01794 521158
020 7474 1800
+5 - 5
+5 -10
+5 -25
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
7
Bar & fabric products
Standard fabric
Electrically welded fabric to BS4483:2005
All standard sheets (A, B, C and D) are 4.8 x 2.4m.
A142, A193, A252, A393 and B785 are also available
in merchant size sheets 3.6 x 2.0m.
See below for Flying End® range.
BS8666:2005 FABRIC
BRC REF.
Square mesh
A393
A252
A193
A142
Structural mesh
B1131
B785
B503
B385
B283
Long mesh
C785
C636
C503
C385
C283
Wrapping mesh
D98
D49
MESH SIZE NOMINAL
DIAMETER OF WIRE
PITCH OF WIRES
CROSS SECTION AREA
NOMINAL MASS
NO. OF SHEETS
PER METRE WIDTH
PER m2
PER TONNE
Main
mm
Cross
mm
Main
mm
Cross
mm
Main
mm2
Cross
mm2
kg
200
200
200
200
200
200
200
200
10
8
7
6
10
8
7
6
393
252
193
142
393
252
193
142
6.16
3.95
3.02
2.22
15
22
29
40
100
100
100
100
100
200
200
200
200
200
12
10
8
7
6
8
8
8
7
7
1131
785
503
385
283
252
252
252
193
193
10.90
8.14
5.93
4.53
3.73
8
11
15
20
24
100
100
100
100
100
400
400
400
400
400
10
9
8
7
6
6
6
6
6
6
785
636
503
385
283
70.8
70.8
70.8
70.8
70.8
6.72
5.55
4.51
3.58
2.78
13
16
21
26
34
200
100
200
100
5
2.5
98
49
98
49
1.54
0.77
57
113
5
2.5
Standard Flying End® fabric
The standard Flying End® fabric range comprises:
BRC Flying End® fabrics are stocked in many
British Standard references, offering considerable
benefits over traditional fabric sheets:
■ Accurate cover – extended overhangs can
eliminate wire build-up at laps.
B.S. FABRIC
REF.
SHEET
SIZE
(m)
MAIN
WIRE
O/H (mm)
CROSS
WIRE
O/H (mm)
A Types
A Types
B Types
5.9 x 2.3
4.8 x 2.4
4.8 x 2.4
100/400
100/500
100/500
100/400
100/500
50/350
■ Faster laying cycle – simplified lap details
improves speed of laying and assists checking.
■ Reduced wastage – in certain cases, larger
sheet sizes can reduce on-site cutting and
waste.
■ Increased flexibility – reducing the lap build-up
allows improved flexibility when positioning
BRC circular spacers.
■ Reduced quantity – the larger sized sheets and
the use of deformed wire can reduce lap
lengths and overall quantity of fabric.
930102
Sales offices:
8
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Bar & fabric products
Made-to-measure and tailored fabric reinforcement
BRC made-to-measure fabric reinforcement
BRC can manufacture standard A, B & C types in sizes to suit your application
(subject to machine capability, transport and handling on site). With or without
Flying Ends®, a more cost effective solution can be achieved by reducing cutting,
wastage and lapping congestion.
BRC tailored fabric reinforcement
Designed to suit specific projects, BRC can provide mesh that offers an alternative
to conventional loose rebar. Supplied with or without Flying Ends®, reinforcement in
various diameters can be offered in sheet sizes to suit your contract (subject to
machine capability, transport and handling on site).
OL1,OL2
OL3, OL4
LL
LC
PL
PC
Overhangs of longitudinal wires
Overhangs of cross wires
Length of longitudinal wires (not necessarily the longest wires in the sheet)
Length of cross wires
Pitch of longitudinal wires
Pitch of cross wires
930102
One directional fabric
A cost-effective alternative to loose rebar in
heavily reinforced areas.
Cut and bent fabric
Standard, Flying End® and made-to-measure
fabrics can be supplied cut to size or bent.
Most British Standard shape codes can be
accommodated but it may be necessary to
manufacture them in sections for ease of
transportation or to enable the shape to be
completed.
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
9
Bar & fabric products
Ancon Reinforcing Bar Couplers - strong, fast and easy to use
Tapered thread range
Standard Series - Connects rebars of the same diameter
Positional Series -For use where the continuation bar cannot be rotated
■ Suitable for the majority of rebar joining applications
■ Fast and simple to install
■ Tested and approved by UK CARES to show compliance
with BS8110
■ Full destructive tests carried out to demonstrate
compliance with BNFL Specification E45 and
BNF.ES.0039_I_B Category B
TAPERED THREAD RANGE
GROUP CBB32
Transition Series - Connects rebars of different diameters
Bar Diameter
12
16
20
25
32
40
50
Standard Series
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Positional Series
Transition Series
MBT range
ET Series - Connects rebars of the same diameter
Continuity Series - For use in phased construction
Transition Series - Connects rebars of different diameters
■
■
■
■
No bar end preparation required
Installation requires no specialist equipment
No bar rotation required
The ET Series is the only BBA approved
rebar coupler
■ Suitable for use on imperial, plain round
or deformed bar
■ Ideal for remedial applications where replacement
of damaged or corroded bar
is necessary
MBT RANGE
GROUP CBB30
Headed Anchor - Provides dead end embedment for bars in concrete
Bar Diameter
10
12
16
20
25
32
40
50
ET Series
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Continuity Series
Transition Series
Headed Anchor
Bartec range
Type A - Used where the continuation bar can be rotated
Type B - Used where it is difficult but not impossible to rotate the
continuation bar
Type C - Used where the continuation bar cannot be rotated
✓
✓
✓
■ Quick and easy to install
■ Designed for use on large scale, high coupler volume projects
■ Tested to demonstrate compliance with BNFL Specification E45 and
BNF.ES.0039_I_B Category A and BS8110, providing a full strength bar
break connection.
BARTEC RANGE
GROUP CBB12
Bar Diameter
12
16
20
25
28
32
36
40
50
Type A
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Type B
Type C
w w w. a n c o n . c o . u k
Sales offices:
10
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Bar & fabric products
Ancon Eazistrip - Reinforcement Continuity System
Ancon Eazistrip
The Ancon Eazistrip Reinforcement Continuity System is a quick and easy to install method of maintaining continuity of
reinforcement at construction joints in concrete. It consists of a galvanised steel casing with a dimpled surface to
provide an effective concrete bond. Pre-bent bars are housed within the casing and are enclosed by a protective
cover. Each end of the unit is sealed with a polystyrene block in order to prevent the ingress of concrete.
The unit is nailed to the formwork and the concrete is cast. After striking the formwork, the cover is
removed and the bars straightened, ready for lapping onto the main reinforcement.
Applications
Benefits
■
■
■
■
■
■
■
■
■
■
■
■
Accelerates the construction process
Simplifies formwork design
Removes the need to drill shuttering
Casing protects bars until required
Risk of site injuries from projecting bars
is minimised
■ Easy to install by site operatives
Floor slabs
Walls
Stairwells
Corbels
Diaphragm walls
Jumpforms
Brick support ledges
Eazistrip Reinforcement Continuity Systems are manufactured using CARES
approved bar which meets the requirements of BS4449.
ANCON EAZISTRIP
GROUP CEE40
h
l
h
l
h
b
h
h
b
Type 2H Double Hook
(not available in 60mm & 80mm box)
Type H Hook
(standard in 60mm and 80mm box)
l
l
h
l
h
l
Type RU U Bar
h
Type U U Bar
l
b
b
Type RA Angle
l
b
h
Type S Straight Bar
l
h
Type S2 Double Straight Bar
l
b
b
Type SH Angle with leg
in horizontal plane
h
b
b
b
l
c
c
c
b
b
Type RA1 Double Angle
Type RA2 Double Angle
Type RA3 Double Angle
Radiused Eazistrip
Eazistrip Water Stop
Radiused Eazistrip is available.
Please contact Ancon or BRC
with your requirements.
Where the potential for water ingress through
the construction joint is a major concern,
Eazistrip can be supplied with a Pentaflex
hydrostatic seal.
w w w. a n c o n . c o . u k
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
11
Bar & fabric products
Reinforcing Bar Couplers
Design benefits
• Allows maximum
bar cross-section to
be used
• Small diameter
reduces the need
for concrete cover
and eliminates
rebar congestion
• Short length and
slim design helps
ensure the least
disturbance to
uniform stiffness
• Splice strength is
independent of
rebar deformation
• Unique tapered
thread requires no
lock nuts and
provides a positive
locking, no-slip
connection
LENTON® Taper Threaded Couplers
■ LENTON® Couplers hold CARES Approval TA1C 5003 on compliance for BS 8110: Part 1: 1997 and
the BNFL Specification for Couplers for use in tension under static loading conditions in sizes 1250 mm.
■ LENTON® PLUS BAR BREAK on A12, P13/P14 holds CARES approval TA1C5009 complying with
BS 8110 Part 1 1997 and BNFL Specification for couplers for Type A mechanical splices.
LENTON® Standard Coupler A12
■ LENTON® A12 Couplers splice the same diameter bars where one bar can be rotated.
LENTON® STANDARD COUPLER A12
GROUP CBB75
D
A
B
®
• LENTON R11 Transition Couplers are also available.
Rebar size
Designation
Metric (mm)
A
B
D
10 12
16
20
25
17* 17* 22* 27* 33
48 49 61 88 96
18 18 24 36 41
32 40
50
42 52 64
107 131 163
46 58 71
*Use hex material (measured across the flats),
others use round material.
LENTON® Position Couplers P13/P14
■ LENTON® P13 Position Couplers splice bars where the ongoing bar is restricted in its axial
movement or cannot be rotated and length adjustability of the coupler is required.
■ LENTON® P14 Position Couplers splice bars which cannot be rotated such as bent bars or hooks.
• Any length, shape,
diameter or
combination of bar
sizes can be
mechanically
spliced
D
P14
LENTON® POSITION COUPLERS P13/P14
GROUP CBB86
A
B
Fc
Max. Fo
P13
D
A
B
Fc
Max. Fo
Rebar size
Designation
Metric (mm)
A
B-P13
B-P14
Fc-P13
Fc-P14
Max Fo-P13
MaxFo-P14
D
10 12
16
20
25
32 40
50
22*
74
42
42
42
85
53
18
27*
88
54
48
48
93
59
24
33
112
75
63
63
116
79
36
41
127
83
68
68
128
84
41
52
144
95
79
79
144
95
46
80
214
140
111
111
204
130
71
22*
77
45
42
42
85
53
18
*Use hex material (measured across the flats), others
use round material.
www.erico.com
Sales offices:
12
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
64
179
114
91
103
172
131
58
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Bar & fabric products
Reinforcing Bar Couplers
Installation benefits
• Takes approximately
four turns to engage
• LENTON® unique
taper angle provides
self centering and
self aligning.
LENTON® Terminator D14
■ LENTON® TERMINATOR D14 is an over-sized end anchor that creates anchorage within
the concrete.
D
LENTON® TERMINATOR D14
GROUP CBB65
Rebar size
Designation
Metric (mm)
A
B
D
E
F
B
• Prevents
crossthreading
AF
E
• One of the fastest
systems to install
- No special tools or
skills required
- No power required
for installation
- Reduces crane time
16
20
25
32 40
50
33
23
18
-
52
29
24
-
64
41
36
-
80
46
41
-
110
52
46
25
80
160
79
72
40
80
41
23
19
-
130
64
58
30
80
LENTON® Form Saver
■ LENTON® FORM SAVER, the new economical alternative for protruding dowels, is available in
fixed lengths with the Standard LENTON® Tapered Thread.
A
• Accelerates
construction
schedules
• Unique LENTON®
colour coded cap
aids in field assembly
10 12
LENTON® FORM SAVER
GROUP CBB72
Description SA10/400 SA12/600 SA16/650 SA20/800
A
400
600
650
800
D
18
18
24
36
D
Other available products
LENTON® Bolt Coupler S13 provides a full-strength joint between a reinforcing bar
and a standard metric bolt.
LENTON® INTERLOK uses the time-tested taper thread and an inorganic grout to
provide structural integrity between load-bearing members in precast construction.
www.erico.com
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
13
Bar & fabric products
When only the best will do….
Over a period of 20 years, Kwikastrip has become established as the UK’s brand leading
reinforcement continuity system. Aside of the well established advantages of using continuity strip,
there are essentially 3 qualities which have earned Kwikastrip its unique market position:
Manufacturing versatility and emphasis on specials
Approximately 85% of Kwikastrip is purpose-made. The aim is always to replicate the reinforcement
detailer’s design in a more buildable format for the contractor. No other system can rival Kwikastrip’s
total flexibility in this regard.
Service and support from a dedicated technical team
Halfen’s long experienced reinforcement team ‘eat and breathe’ Kwikastrip every day of the week,
and are very able to advise regarding the scope for any given application. You might be surprised
just how inventive some of the solutions can be for seemingly ‘impossible’ applications.
Product Approval
Kwikastrip was the very first product ever to be awarded CARES Technical Approval
status. The approval followed full-scale structural testing of the product in concrete, which
concluded that the performance of joints formed using Kwikastrip were no less than that
of traditional construction (i.e. with loose/unbent reinforcement). This full product approval
provides critical reassurance that CARES has evaluated Kwikastrip as being ‘fit for purpose’.
Please ask for a copy of the CARES Technical Approval report.
KWIKASTRIP STANDARD RANGE
GROUP CEE11
BAR
TYPE
BAR
SPACINGS
LAP
LENGTH
UNIT
TYPE
M8.5S
T10
T12
C150/C200
410
500
M15S
T10
T12
C150/C200
M17S
T10
T12
M19S
T10
T12
UNIT
TYPE
DIMENSIONS
DIMENSIONS
BAR
TYPE
BAR
SPACINGS
LAP
LENGTH
M25S
T10
T12
C150/C200
410
500
410
500
M12D
T16
C150/C200
650
C150/C200
410
500
M19D
T16
C150/C200
650
C150/C200
410
500
M25D
T16
C150/C200
650
Kwikastrip standard units are 1.2m long. To order, please state quantity, unit type, bar type, and bar spacing.
For example: 50 no. M8.5S T10 C150. See right hand page for ordering specials.
Sales offices:
14
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Bar & fabric products
KWIKASTRIP SPECIALS
GROUP CEE11
38 or 21
39 or 13D
37 or 11
77
61 or 51
38R or 21R
37C or 1 1C
20 or 00
37B or 11B
1st Pour
37 or 11X
32 or 13S
100
38D or 21D
53 or 44
20A or 00A
20B or 00B
32X or 13X
20C or 00C
37A or 11A
2nd Pour
Select the required bar shape from the above illustrations, then complete the scheduling form below and forward to your local BRC sales office.
There is no need to consider individual casing lengths, as we will determine the optimum arrangement as a result of the customer-supplied
information below.
Page
KWIKASTRIP SCHEDULING FORM
of
Contractor:
Tel:
Site:
Fax:
Drawing No(s):
Date:
Schedule Ref :
Detailed by:
Structural Member
Bar
shape
Bar
mark
No. of
Mbrs.
Bars
each
Bars
total
Ty pe &
Dia.
Bar
Cntrs.
H
Height
W
Width
L
Lap
A
length
K
length
A
B
C
D
E
For scheduling advice, radiused applications, waterproofing options, kickerless fixings contact your local BRC sales office
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
15
Spacers & accessories
Tying wire
TYING WIRE
GROUP CWW01
Black annealed 16 gauge wire for tying reinforcement
bar and fabric.
Ref.
16G
SS304
Description
16 Gauge Black Annealed
18 Gauge Stainless Steel Grade 304
18 gauge stainless steel grade 304 tying wire.
REELFIX
GROUP CWW01
Reelfix Tying Wire System
Quality tying wire for faster and easier
steel fixing with no waste.
Reelfix is available as a disposable 2kg
coil or as a refillable cartridge with belt.
Double loop ties and tools
Ref.
Dispos2
Description
Disposable 2Kg Coils
16g2k
Refill2
Reelfix 2Kg Mini Coil Cartridges
2Kg Cartridge Refills
LOOP TIES AND TYING TOOLS
GROUP CWW20
Ref.
RDLT100
RDLT125
RDLT150
RDLT200
RDLT250
RDLT300
WTT01
Continuous high chairs
Description
Double Loop Tie 100mm
Double Loop Tie 125mm
Double Loop Tie 150mm
Double Loop Tie 200mm
Double Loop Tie 250mm
Double Loop Tie 300mm
Wire Tying Tool
CONTINUOUS HIGH CHAIRS
GROUP CSS52
For supporting fabric in ground floor slabs
and spacing fabric in walls. Supplied in
standard 2m lengths. Also available in
heights up to 300mm. Manufactured from
cold reduced wire to BS4482.
Usage
Approximately one 2m length per 2m2
of fabric.
Special lengths
Continuous high chairs are also available in
special lengths to order. Minimum 1m,
maximum 6m in 100mm increments.
ISO9001:2000
Circular wire spacers
Ref.
CHL50
CHL60
CHL75
CHL80
CHL90
CHL105
CHL120
CHL135
CHL150
CHL165
CHL180
CHL200
CHL230
CHL250
CHL280
Height mm
50
60
75
80
90
105
120
135
150
165
180
200
230
250
280
Pack Qty.
25 x 2m
25 x 2m
25 x 2m
25 x 2m
25 x 2m
25 x 2m
25 x 2m
25 x 2m
25 x 2m
25 x 2m
25 x 2m
20 x 2m
Height mm
50
60
75
80
90
105
120
135
150
165
180
200
Pack Qty.
25
25
25
25
25
25
25
25
25
25
25
25
CIRCULAR WIRE SPACERS
GROUP CSS54
Simple method of supporting fabric in ground
floor conditions. Supplied flat in 3.0m lengths
to be formed into a circle approximately
900mm diameter on site. Manufactured from
cold reduced wire to BS4482.
Usage
Approximately one circular spacer per 2m2 of
fabric.
Ref.
CS050
CS060
CS075
CS080
CS090
CS105
CS120
CS135
CS150
CS165
CS180
CS200
ISO9001:2000
Pre-stressed wire and stabilised strand
Pre-stressed wire and stabilised strand are also available. Please contact your local BRC sales office for details.
Sales offices:
16
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Spacers & accessories
Single cover concrete spacers
SINGLE COVER CONCRETE SPACERS
GROUP CSS70
For the vertical and horizontal spacing of
reinforcing bar providing maximum stability
under normal loading conditions.
Ref.
C20
C25
C30
C35
C40
C50
C60
C75
Usage
4 spacers per m2.
Double cover concrete spacers
Cover mm
20
25
30
35
40
50
60
75
Pack Qty.
1000
500
250
250
250
200
100
100
DOUBLE COVER CONCRETE SPACERS
GROUP CSS70
A more flexible spacer for the vertical and
horizontal spacing of reinforcement bar
providing maximum stability under normal
loading conditions.
Ref.
C25/30
C30/40
C40/50
C60/75
Cover mm
25 or 30
30 or 40
40 or 50
60 or 75
Pack Qty.
500
250
200
50
Usage
4 spacers per m2.
Triple cover concrete spacer
TRIPLE COVER CONCRETE SPACER
GROUP CSS70
For use in vertical situations providing
maximum stability under normal loading
conditions and minimising the area of spacer
at the form face.
Ref.
C35/40/50
Cover mm
35, 40 or 50
Pack Qty.
200
Usage
4 spacers per m2.
Concrete fabric spacer
CONCRETE FABRIC SPACER
GROUP CSS72
Used for the spacing of fabric at the bottom of
slabs, they have a circular base for maximum
stability under normal loading conditions.
Ref.
CFS40/50
Cover mm
40 or 50
Pack Qty.
100
Usage
4 spacers per m2.
Concrete line spacers
CONCRETE LINE SPACERS
GROUP CSS71
A heavy duty concrete spacer simply laid on
the sub-base or formwork for the fast
placement of reinforcement.
Ref.
CSB25X1
CSB30X1
CSB40X1
CSB50X1
CSB60X1
CSB75X1
Usage
2 linear metres per m2.
Available in 1m lengths.
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
Cover mm
25
30
40
50
60
75
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
17
Spacers & accessories
Grade plate spacers
GRADE PLATE SPACERS
GROUP CSS15
A lightweight option for the spacing of fabric at
the bottom of slabs. Their wide base gives
extra stability particularly on soft blinding.
Ref.
GP25/30
GP40/50
GP65/75
GP90/100
Usage
4 spacers per m2.
Plastic line spacers
Ref.
AHS20
AHS25
AHS30
AHS35
AHS40
AHS50
Usage
Maximum 50d spacings.
Wheel spacers
Ref.
UW20
UW25
UW30
UW40
UW50
Usage
Dependent on bar diameter.
Safety end caps
Pack Qty.
100m
100m
100m
50m
50m
50m
Cover mm
20
25
30
40
50
Bar Dia. mm
8-12
8-12
8-12
8-20
12-20
Pack Qty.
1000
500
500
250
250
SAFETY END CAPS
GROUP CVV99
Plastic protection caps for exposed
reinforcing bar.
Midlands
North
North East
Cover mm
20
25
30
35
40
50
WHEEL SPACERS
GROUP CSS13
For spacing vertical reinforcement in columns
etc. The wheels easily clip onto the
reinforcement bar and minimise the area of
spacer at the form face.
Sales offices:
Pack Qty.
250
250
200
100
PLASTIC LINE SPACERS
GROUP CSS06
Use for bottom spacing of fabric or bar with
light loads against formwork and particularly
metal decking. Available in 2 metre lengths.
18
Cover mm
25 or 30
40 or 50
65 or 75
90 or 100
01623 555111
01226 730330
01325 381166
Ref.
RS616
RS1632
RS4050
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
To Suit Bar Dia.
6-16
16-32
40-50
Pack Qty.
250
250
100
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Spacers & accessories
Void form holding down bolt sleeve
VOID FORM HOLDING DOWN BOLT SLEEVE
GROUP CVV99
The new standard in foundation bolt cones
Plastic conical void former that eliminates the need for
removal and disposal of cardboard or polystyrene type
cones. Fully enclosed base removes the need for bolt
adjustment.
Ref.
HDB100x100x375mm
Length
380mm max
Base
115 x 115mm
Void form is supplied at 380mm long and can be easily
cut on site to suit shorter bolts.
* Centralising cap not shown for clarity.
Waxed cardboard bolt boxes
WAXED CARDBOARD BOLT BOXES
GROUP CVV99
A waxed conical cardboard bolt box, used to form
voids and accommodate movement of holding down
bolts.
Ref.
CBW225
CBW300
CBW375
CBW450
CBW525
CBW600
Polystyrene bolt boxes
Length mm
225
300
375
450
525
600
Dia. Top/Bot
70/20
90/20
100/25
115/30
115/30
130/30
POLYSTYRENE BOLT BOXES
GROUP CVV01
Core diameter for bolt is approximately 25mm.
Other sizes made to order.
Ref.
CB225
CB300
CB375
CB450
CB525
CB600
CB750
Use proprietary dissolving agent for removal of bolt
boxes.
Holding down bolts
Length mm
225
300
375
450
525
600
750
Dia. Top/Bot
75/40
75/40
75/40
75/40
75/40
75/40
75/40
HOLDING DOWN BOLTS
GROUP CVV99
Holding down bolt assemblies comprising bolt,
washer plate, nut and washer.
Please contact your local BRC sales office for details
Range from 16 - 30mm in lengths 200 - 600mm
depending on grade. Grade 4.6 or 8.8 available.
General purpose grout
GENERAL PURPOSE GROUT
GROUP CCCB2
A general purpose, non-shrink grout as a dry
powder requiring only the addition of water to
produce a free-flowing or trowellable mortar,
which will maintain its original volume after
curing.
Ref.
GPG25
Weight/Pack
25kg
Yield
12.5 litres per 25kg bag.
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
19
Slab products
DYNA Quell Waterstop
DYNA QUELL WATERSTOP
GROUP CII52
DYNA Quell is a high swelling material used
for effective sealing of joints in concrete
construction. It is produced from a
combination of Bentonite and Butyl rubber.
This material will expand on contact
with water to seal the gaps and
pores in a concrete joint.
Ref.
DBWATERSTOP20/25
FIXINGSTRIP1
FIXINGNAIL
Dim.
mm
20x25
1m
Roll Size Pack size
m
5
8
100
After expanding the material
retains its elasticity so that the
seal will not be affected by any
subsequent movement of the
structure.
Polythene and joint tape
BBA GRADE POLYTHENE
GROUP CGG03
The products are available in thicknesses of
■ 250 microns (1000 Gauge).
■ 300 microns (1200 Gauge).
■ 500 microns (2000 Gauge).
Ref.
DP1000
DP1200
Thickness
mµ
250
300
Roll Width
m
4
4
Roll Length
m
25
25
Roll Width
m
4
4
4
Roll Length
m
25
25
12.5
300 micron polythene is also available as a centrefold.
Standard polythene is folded twice and supplied as a 1m wide roll.
Centrefold polythene is folded once and supplied as a 2m wide roll.
PIFA GRADE POLYTHENE
GROUP CGG03
Ref.
Thickness
mµ
PDP1000 250
PDP1200 300
PDP2000 500
TEMPORARY PROTECTIVE SHEETING
GROUP CGG03
Ref.
TPSM (medium duty)
TPSH (heavy duty)
Roll Width
m
4
4
Roll Length
m
50
25
Roll Size
50mm x 66m
50mm x 66m
Pack Qty.
10
10
JOINTING TAPE
GROUP CCCB9
Ref.
SST (single sided)
DST (double sided)
Sales offices:
20
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Slab products
Gas protection membranes
BRC offer a range of gas barriers to provide
protection against methane or radon gas. Fully
certificated, the range briefly comprises:
Radon barrier
Manufactured from LDPE, reinforced with a
strong multifilament yarn. Typical weight is
370g/m2.
Methane barrier
Manufactured from LDPE, reinforced with a
strong multifilament yarn and aluminium foil.
Typical weight is 420g/m2.
Accessories
Also available is a full range of ducts, vents and
sumps.
Service
Non standard panels can be produced to suit an
individual layout. This minimises cutting and
waste, as well as simplifying the laying process
and ensuring that a full seal is provided.
We can provide design assistance and layout
drawings.
A supply and fix service can also be made
available.
Premseal
Waterproof membranes
Premseal waterproof membranes combine the very best in modern polymer laminates with traditional bitumen and polymer
adhesives to form extremely tough, hard-wearing waterproof membranes for even the most stringent applications.
All Premseal membranes are designed to have excellent situation-tolerant installation properties. Specialist membranes are
available to give protection against landfill gases such as methane, naturally occurring radioactive radon and solar radiation.
Internal corner
Pipe through slab
Premseal 'O' series
protection board secured
with Premstik and boards
joined with Premseal
reinforcing tape
Premb
board 'O' Series
protecttion board
Premseal self-adhesive
waterproof membrane
Premseal self-adhesive
membrane star cut around pipe
Pre-formed or bitumen
mastic fillet
Premseal fillet
External corner
Concrete parapet
Premboard 'O' Series protection
board secured with Premstik and
boards jointed with Premseal
reinforcing tape
Premkol 701 or other
approved sealant
Premseal solar shield
Premseal self-adhesive
membrane
reinforced at corner
Insulation screed shingle
or paving
Premseal fillet
Sales offices:
Midlands
North
North East
Premseal self-adhesive
waterproof m
membrane
Premboard 'O' series
protection board
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
21
Slab products
Dowel bars
DOWEL BARS
GROUP CGG07
Sawn end plain round
A full range of sawn end, plain round dowel
bars for use in movement joints.
Ref.
R10
R12
R16
R20
R25
High yield ribbed tie-bars
A full range of high yield ribbed tie-bars for
use in tied joints where movement is to be
restricted.
Dia. mm
10
12
16
20
25
TIE BARS
GROUP CGG07
Stainless steel dowels
Supplied to order.
Ref.
T10
T12
T16
T20
T25
Dowel bar sleeves
DOWEL BAR SLEEVES - GROUP CMM01
DOWEL BAR SLEEVES - continued
Ref.
Ref.
Bar
Dia.
mm
DB12/450 12
DB16/200 16
DB16/450 16
Plastic debonding sleeves for use
in dowelled movement joints.
Dowel bar debonder
Dia. mm
10
12
16
20
25
Sleeve
Length
mm
450
200
450
Pack
Qty.
100
100
100
Bar
Dia.
mm
DB20/300 20
DB25/300 25
DB25/375 25
Sleeve
Length
mm
300
300
375
Pack
Qty.
100
100
100
DOWEL BAR DEBONDER
GROUP CCCB8
A bituminous based compound to allow dowel
bars to completely break bond with concrete.
Complies with clause 1011 DOT specification
for highways work.
Ref.
DB005
DB025
Pack Size
5L
25L
Coverage
1.8 - 3.6m2 per litre.
Expansion dowel caps
EXPANSION DOWEL CAPS
GROUP CGG05
Rigid PVC caps with compressible filler (25mm)
to allow for expansion.
Ref.
D12
D16
D20
D25
D32
D40
Dowel bar cradles
Expansion joint cradles
Height is to the underside of the dowel.
Supplied by the half cage.
Midlands
North
North East
01623 555111
01226 730330
01325 381166
Pack Qty.
100
100
100
100
100
100
Height
mm
CJC75
75
CJC95
95
CJC125 125
Slab Depth
Range mm
150-180
190-230
240-300
Length
mm
2000
2000
2000
RCPS7
Pack qty. 100
Ref.
Sleeves
For use with contraction joint cradles.
Usage: 5 sleeves per linear metre of joint.
Sales offices:
Cap Length mm
100
100
100
100
100
100
CONTRACTION JOINT CRADLES
GROUP CSS60
Contraction joint cradles
Height is to the underside of the dowel.
Supplied by the half cage.
22
Bar Dia. mm
12
16
20
25
32
40
Sleeves
EXPANSION JOINT CRADLES
GROUP CSS60
Ref.
Height
mm
EJC65
65
EJC90
90
EJC115 115
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
Slab Depth
Range mm
150-180
190-230
240-300
Length
mm
2000
2000
2000
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Slab products
Crack inducers
TOP CRACK INDUCER
GROUP CMM07
Top crack inducer (two-part)
Rigid PVC extrusions for use in induced joints.
Total depth of crack inducer to be 1/4 to 1/3 of
slab depth.
Ref.
Top Section
Width/Depth
mm
10/25
10/25
BF10/50/25
BF10/75/25
Bottom crack inducer
Rigid PVC extrusions for use in induced joints.
Total depth of crack inducer to be 1/4 to 1/3 of
slab depth.
Bottom
Section
Section
Depth
Depth mm mm
25
50
50
75
BOTTOM CRACK INDUCER
GROUP CMM05
Ref.
CY40
CY50
CY75
Miothene joint filler
Section
Y
Y
Y
Depth mm
40
50
75
MIOTHENE JOINT FILLER
GROUP CMM20
Closed cell polyethylene foam strip 35kg/m3
Perforated for easy removal of top section.
Standard range supplied in 2m strips.
Also available in sheets or cut to size in 10mm,
12mm, 15mm, 20mm and 25mm thicknesses.
Frost/curing blankets
Ref.
Width
mm
S100/10/10
S140/10/10
S150/12/12
S150/20/20
S175/12/12
S175/20/20
S200/12/12
S200/20/20
100
140
150
150
175
175
200
200
Thickness
mm
10
10
12
20
12
20
12
20
Perforated
mm from
edge
10
10
12
20
12
20
12
20
FROST/CURING BLANKET
GROUP CMM10
Closed cell polyethylene blanket
Effective as frost protection in winter and to
aid curing during summer.
Ref.
FB75X2/10
Description
75 x 2m blanket, 10mm thick
Air bubble blankets and hessian blankets also
available.
Concrete screed rails
CONCRETE SCREED RAILS
GROUP CPP11
Concrete screed rail for accurate floor levels
without the need to strike traditional road forms.
Screed chairs
BR50
BR100
BR125
BR150
50
100
125
150
Ref.
SCS
SCC
SCB
T22
Metal screed chairs are fully
adjustable and supplied in
two parts. Height is adjusted using
thread.
Midlands
North
North East
Height mm
Length m Rails Per
Bundle
3
104
3
48
3
33
3
27
PLASTIC SCREED CHAIRS
GROUP CGG01
Plastic screed chairs are fully
adjustable and ideal for lightweight
applications. Use with a 50mm
diameter tube. Shaft is supplied in
2m lengths to be cut on site.
Sales offices:
Ref.
01623 555111
01226 730330
01325 381166
Description
Saddle
Collar
Base
22mm Tubing for Shaft
METAL SCREED CHAIRS
GROUP CGG01
Ref.
MSC115-150
MSC145-205
MSC195-310
MSC285-405
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
Height Range mm
115-150
145-205
195-310
285-405
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
23
Slab products
PermaSteel
PermaSteel is a low cost ‘leavein-place’, light duty application
screed rail that takes the concept
of ‘leave-in-place’ formwork onto
the next stage. Using Permaban’s
experience in constructing floors
and formwork design, other ‘all
steel’ formwork systems were
examined in depth and in every
case design or installation faults
were evident in some way.
Permaban addressed these
shortcomings with the
development of PermaSteel.
Type 1
PERMASTEEL ALL STEEL SCREED RAILS
GROUP CPP99
In addition PermaSteel
provides some arris support,
accommodates dowel bars,
acts as a crack inducer and
can be supplied with a sealant
void former. Permasteel rails
are easy to handle and transport
as the weight is low and they
are delivered in bundles that
can be stacked.
Optional Sealant Void Former
Ref.
Height mm
Length m
Type 1
MSR115mmx3m
115
3
MSR155mmx3m
155
3
PERMASTEEL/LFEET 115/155 extra feet
*Type 1 comes with 3 feet. If a Bunyan striker is used
then employ at least 4 feet per 115mm rail and 5 for
the 155mm.
Type 2
MSR40mmx3m
40
3
MSR70mmx3m
70
3
SSVF
Void former
3
For heavy duty applications, please use the
AlphaJoint range of products.
Type 2
BetaJoint
An easily installed, adjustable ‘leave-in-place’ formwork system for light to
medium duty applications with bolt-on leave-in-place’ feet, or use Permaban
AlphaFix removable fixing system to provide ’Micrometer’ adjustment for
superflat floors.
BetaStrip 2mm wide or BetaTop
12mm wide screed rail for tied joints
or BetaJoint for contraction joints.
Available for 100mm to 225mm deep
slabs and easily adjustable to level.
Load transfer by 6mm Diamond
Dowels, round or square dowel, or
tie bar.
BETAJOINT
GROUP CPP99
Ref.
B-JT100
B-JT125
B-JT150
B-JT175
B-JT200
Height mm
100
125
150
175
200
Length m
3
3
3
3
3
Height mm
100
125
150
175
200
Length m
3
3
3
3
3
Height mm
100
125
150
175
200
Length m
3
3
3
3
3
BETASTRIP
GROUP CPP99
Ref.
BDP-SP/SD-100
BDP-SP/SD-125
BDP-SP/SD-150
BDP-SP/SD-175
BDP-SP/SD-200
BetaJoint
Special Beta-products available for
slab depths up to 400mm deep.
BETATOP
GROUP CPP99
Ref.
BDP-TP/SD-100
BDP-TP/SD-125
BDP-TP/SD-150
BDP-TP/SD-175
BDP-TP/SD-200
BetaStrip
Sales offices:
24
Midlands
North
North East
01623 555111
01226 730330
01325 381166
BetaTop
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Slab products
AlphaJoint
Permaban AlphaJoint
gives concrete floors
enhanced performance
from free contraction
joints. It incorporates
patented systems of load
transfer across joints,
which enhance the loading
value of the concrete floor.
AlphaJoint satisfies the
requirements in Concrete
Society TR34 and BS82042: 1999 for load transfer
and arris protection in
heavy duty concrete
floor slabs.
ALPHAJOINT
GROUP CPP21
w/Alpha Dowel
w/Diamond Dowel
Ref.
DD6-120/140/150/175
DD6-225
AD10-120/140/150/175
AD10-7-225
AD10-7-250/275
Height mm
150-200
201-250
150-200
201-250
251-300
Length m
3
3
3
3
3
w/AlphaFeet
w/AlphaFix
Dowel systems
Permaban Dowel Systems provide
superior load transfer across the
joint compared to traditional
round dowels. These innovations
spread stress over the full width
of the dowel.
DOWEL SYSTEMS
GROUP CGG07
Alpha Dowel
AD10-CS-NT
DD6-CS-NT
TR10 or 6
Alpha Dowel
Diamond Dowel
Tri-Plate
PermaSleeve
Permaban dowels allow sub base
preparation right up to the slab edge.
PERMASLEEVE
GROUP CGG07
Square dowel bar
Permaban dowel systems
eliminate vertical joint movement
while allowing two-way lateral joint
movement between adjacent bays
of the concrete slab.
Tri-Plate
GROUP CMM01
Sleeve for square dowel bar
Diamond Dowel
Manhole surrounds
MANHOLE SURROUNDS
GROUP CPP40
This new product allows virtually any
manhole to be isolated and
finished with far greater
ease than before.
It reduces the need
to finish the awkward detailing
around these objects during the
middle of a large flood pour of concrete.
Ref.
MHS-150-1000
MHS-150-1500
MHS-150-2000
MHS-150-3000
MHS-175-1000
MHS-175-1500
MHS-175-2000
MHS-175-3000
MHS-200-1000
MHS-200-1500
MHS-200-2000
MHS-200-3000
Each surround has jacking studs to give
accurate adjustment to height and level as
well as effective load transfer features
using Permaban Diamond Dowels.
Height mm
150
150
150
150
175
175
175
175
200
200
200
200
Length m
1x1
1.5 x 1.5
2x2
1.5 x 3
1x1
1.5 x 1.5
2x2
1.5 x 3
1x1
1.5 x 1.5
2x2
1.5 x 3
Other products
■ Composite flooring systems
■ Pumpable flooring systems
■ Terrazzo styling techniques
■ Dry-Shake floor toppings
■ PermaSeal floor sealant systems
■ PermaFlex joint sealant systems
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
www.permaban.com
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
25
Slab products
Release
MOULD RELEASE OIL
GROUP CCCB1
Mould release oil
A high quality mould oil for general site and precast yard use that achieves a top
quality concrete finish in most situations.
BCA category 2.
UKWFBS listed.
Spray or brush applied. Coverage: 20-30m2 per litre.
Chemical release agent
Specially blended reactive oils which give a high quality finish with most
formwork types.
BCA category 5.
UKWFBS listed.
Spray applied. Coverage: 30-50m2 per litre.
Ref.
MRO005
MRO025
MRO205
Size
5L
25L
210L
CHEMICAL RELEASE AGENT
GROUP CCCB1
Ref.
CRA25
CRA205
Size
25L
210L
Curing
CURING & SEALING COMPOUNDS
GROUP CCCB5
Curing compound – silicate based
An aqueous solution of metalic silicates as a general curing aid.
Also available tinted.
UKWFBS listed.
Spray applied. Coverage: 5.5-6m2 per litre.
Ref.
SCA025
SCA205
CM025
CM205
CSC025
CSC205
Curing compound – resin based
Formulated with inert hydrocarbon resins to give excellent film
and moisture retention.
90% efficiency rating.
UKWFBS listed.
Spray applied. Coverage: 5.5-6m2 per litre.
Type
Silicate Based
Silicate Based
Resin Based 90%
Resin Based 90%
Curing & Sealing
Curing & Sealing
Size
25L
210L
25L
210L
25L
210L
Water-based curing products
Water-based curing products are also available.
Please contact your local BRC sales office
for details.
Curing and sealing compound
A clear acrylic polymer resin solution for application to surfaces of freshly laid
concrete to form a highly effective curing membrane and an in-depth sealer.
75% efficiency rating
Spray applied. Coverage: 6m2 per litre.
Surface hardening and dustproofing
SURFACE HARDENING
GROUP CCCB5
A surface hardener for new and old concrete floors to provide dustproofing and
increase durability.
Brush applied. Coverage: 6m2 per litre (dependent on floor porosity).
Surface retarders
Ref.
SH025
SH200
Size
25L
210L
SURFACE RETARDERS
GROUP CCCA4
To provide an exposed aggregate finish for concrete or a key for
subsequent pours.
Mould face
For application to mould face prior to placing of concrete.
Brush applied. Coverage: 15-16m2 per litre.
Ref.
AMFS005
AMFS025
ATFS005
ATFS025
ATFS205
Type
Size
Mould Face Retarder
5L
Mould Face Retarder 25L
Top Face Retarder
5L
Top Face Retarder
25L
Top Face Retarder
210L
Top face
For treatment to the top face of freshly cast concrete.
Spray applied. Coverage: 5m2 per litre.
Sprayers
SPRAYERS
GROUP CCCN7
Plastic and metal sprayer units
Sales offices:
26
Midlands
North
North East
Ref.
PLT1
PLT125
LMS07
LMS11
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
Type
Plastic
Plastic
Metal
Metal
Size
7L
12.5L
9L
11L
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Formwork
Threaded formwork tie bar system
THREADED TIE BAR SYSTEM
GROUP CTT08
Tie rod
For securing formwork.
Coarse self-cleaning threaded bar with a core
diameter of 15mm and an overall diameter of 17mm.
Available in 6m, 3m, 2m, 1.5m and 1.2m lengths.
The ultimate fail load is 180KN.
Also available in 20mm.
Ref.
TTR
TTR20
TWN
TWN20
TPH
TPH20
Description
15mm Rod (6m Length)
20mm Rod (6m Length)
15mm Wing Nut
20mm Wing Nut
Waler plate 120 x 120 x 12mm
Waler plate 120 x 120 x 12mm
Wing nut
To suit a 15mm tie rod.
Also available for 20mm tie rod.
Waler plates, hexagon nuts, connectors,
water barriers, rock anchors
All items are compatible with the 15mm tie
rod system.
Also available for 20mm tie rod.
PLASTIC SLEEVE
GROUP CTT01
Plastic sleeve
To allow the tie rod to be retrieved.
To suit a 15mm tie rod system the sleeve has a
22mm internal diameter.
26mm also available to suit 20mm tie rod.
Ref.
T22
T26
Internal Dia. mm
22
26
PLASTIC CONES
GROUP CTT02
Plastic cones
A 22mm diameter plastic cone to fit inside a
22mm plastic sleeve.
26mm also available to suit 20mm tie rod.
Ref.
K22
K26
Tube I.D. mm
22
26
RUBBER STOPPER
GROUP CTT08
Rubber stopper
For sealing sleeve after a concrete pour.
26mm diameters also available to suit 20mm tie rod.
Ref.
F22
F26
Formwork accessories
Tube I.D. mm
22
26
CHAMFER CORNER PROFILE
GROUP CTT08
Chamfer corner profile
A triangular plastic strip in 2.5m lengths.
To form a chamfer in concrete columns.
Available with or without a nailing flange.
H
Ref.
CF10
CF15
CF20
CF25
CFF10
CFF15
CFF20
CFF25
Type
Plain
Plain
Plain
Plain
with Flange
with Flange
with Flange
with Flange
Formwork joint tape
A multi-purpose PVC adhesive tape
in roll size 50mm x 33m.
To assist in joint applications.
FORMWORK TAPE
GROUP CCCN1
Grout check foam tape
Closed cell tape for sealing formwork in roll
sizes 12mm x 6mm and 24mm x 12mm.
Helps to reduce grout loss.
GROUT CHECK FOAM TAPE
GROUP CCCB9
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
Ref.
FWT
Ref.
SF1210
SF2405
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
H mm
10
15
20
25
10
15
20
25
Roll size
50mm x 33m
Roll size
12mm x 6mm x 10m
24mm x 12mm x 5m
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
27
Formwork
Column corner guards
Materials: Mild steel plate - hot dip galvanised, powder or
nylon coated (colour to order).
Stainless steel - standard mill finish or
satin/mirror polished.
Sizes:
Standard 50 x 50 x 3mm x 1200mm long.
Formed to various radii, lengths as required.
Fixings:
Cast-in applications - anchors and threaded
fixing points.
Surface fix applications - countersunk holes.
COLUMN CORNER GUARDS
GROUP CTT04
Please contact your local BRC sales office for details
Rapidobat
Rapidobat
Round columns made easy!
Rapidobat is a purpose made spirally wound rigid paper tube of extremely high
quality. The tube is internally lined with a smooth faced plastic release sheet
which provides the ultimate in concrete surface finish and appearance. Rapidobat
is the fast and economical solution to the problems of forming round columns
which is complicated with timber formwork and expensive with GRP or steel
formwork. Rapidobat incorporates a unique and patented tear off strip which
means that stripping is achieved in a matter of seconds - without any risk of
damage to the concrete face. Importantly, after column inspection, the stripped
Rapidobat tube then provides physical protection from potential site damage to
the attractive newly cast column.
RAPIDOBAT
GROUP CTT99
Tube Internal
Diameter (mm)
150
200
240
250
300
350
360
400
435
450
500
560
600
650
700
750
800
900
1000
Tube Wall
Thickness (mm)
4.5
4.5
5.0
5.0
5.0
5.0
5.0
6.0
6.0
6.5
7.0
7.0
8.0
8.5
9.5
10.0
10.5
12.0
13.5
Maximum Pour
Height (m)*
12.30
10.25
10.25
10.25
10.25
8.79
8.79
7.69
7.00
6.50
7.30
6.80
6.15
6.00
7.03
7.03
7.69
7.70
7.65
* The maximum recommended pour height of concrete in consideration of the internal pour
pressure related to tube diameter and wall thickness.
Sales offices:
28
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
®
Formwork
Shuttering Strips
■ Use to form openings in concrete slabs.
SHUTTERING STRIPS
GROUP CPP50
■ Shuttering strips are perforated
Type
SF15
SF17
SF18
SF22
SF25
SF27
SF30
crosswise every 50mm.
■ The surface profile ensures proper bond
to the concrete.
Height
150 mm
175 mm
180 mm
225 mm
250 mm
275 mm
300 mm
Roll size
10 m
10 m
10 m
10 m
10 m
10 m
10 m
Locking Steel Kickers
■ Eliminates the need for costly set-up of
LOCKING STEEL KICKERS
GROUP CTT09
kicker shutttering.
Type
Wall width mm
LSK150
150
LSK175
175
LSK200
200
LSK225
225
LSK250
250
Other sizes are available on request
■ Ready to use.
■ Fast and easy adjustment.
■ Long body giving solid fixing.
■ No tools required.
W E D G E L O C K
Speed Edge Formwork
■ Leave in place formwork for ground
SPEED EDGE FORMWORK
GROUP CPP60
supported slabs or bases.
Type
■ Self-supporting.
R150
R175
R200
R250
R300
■ Fast installation.
■ Standard 2.25m long units.
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
B
(mm)
120
120
120
155
180
H
(mm)
150
175
200
250
300
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Length
(m)
2.25 m
2.25 m
2.25 m
2.25 m
2.25 m
29
Weldmesh and gabions
Heavy Weldmesh range
Light Weldmesh range
Galvanised after manufacture and self colour finish
Galvanised after manufacture
4.8mm
4.0mm
3.1mm
2.5mm
0.7mm
1.0mm
2x2
3x3
3x6
75mm x 25mm x
4.80/3.00mm
1x1
2x1
2x2
3 x 1/2
3x3
1x1
11/2 x 11/2
2x1
2x2
3 x 1/2
3x1
3x3
4x4
1x1
11/2 x 11/2
2x1
2x2
3 x 1/2
3x1
1/4
1/2
1/2
x 1/4
1.6mm
x 1/2**
x 1**
1 x 1**
1/2
1/2
x 1/2
x 1*
3/4 x 3/4**
1 x 1**
2x2
* Also available pre-galvanised
** Also available self colour
Stainless steel Weldmesh 304 spec.
Pre-galvanised Weldmesh
3.0mm
2.5mm
1.6mm
2.5mm
3.0mm
3 x 1/2
1x1
2x2
3 x 1/2
1x1
2x2
1/2
2x2
50mm x 50mm
2x2
50mm x 50mm
x 1/2
1x1
Weldmesh size range – weight guide.
2
Weldmesh gauges guide
2
To convert the panel weight into Kg/m multiply the Kg/ft value by 10.76
SPECIFICATION
APPROX. WEIGHT KG/FT2
SELF COLOUR GALVANISED
2 x 2 x 4.80mm
3 x 3 x 4.80mm
3 x 6 x 4.80mm
75mm x 25mm
x 4.80mm/3.10mm
1 x 1 x 4.00mm
2 x 1 x 4.00mm
2 x 2 x 4.00mm
3 x 1/2 x 4.00mm
3 x 3 x 4.00mm
1 x 1 x 3.10mm
11/2 x 11/2 x 3.10mm
0.52
0.35
0.27
0.38
0.71
0.52
0.35
0.80
0.23
0.41
0.28
0.40
0.74
0.54
0.36
0.83
0.24
0.43
0.29
APPROX. WEIGHT KG/FT2
SELF COLOUR GALVANISED
2 x 1 x 3.10mm
2 x 2 x 3.10mm
3 x 1/2 x 3.10mm
3 x 1 x 3.10mm
3 x 3 x 3.10mm
4 x 4 x 3.10mm
1 x 1 x 2.50mm
11/2 x 11/2 x 2.50mm
2 x 1 x 2.50mm
2 x 2 x 2.50mm
3 x 1/2 x 2.50mm
3 x 1 x 2.50mm
0.31
0.21
0.48
0.28
0.14
0.11
0.27
0.18
0.20
0.14
0.32
0.18
0.33
0.22
0.50
0.29
0.15
0.12
0.29
0.19
0.22
0.15
0.34
0.19
Weldmesh flat
Quality standards
Self colour finish
Gauge sizes
FLAT ON EDGE
EDGE ON EDGE
Panel size:
1200mm x 2400mm
Finish: Self Colour
(bright wire)
Sales offices:
30
0.51
0.34
0.26
SPECIFICATION
SPECIFICATION
MESH x WIRE SIZES
PANEL WEIGHT
(Kg)
50 x 50 x 4/2mm
7.24
25 x 25 x 4/2mm
50 x 50 x 5/2.50mm
25 x 25 x 5/2.50mm
50 x 50 x 6/3mm
25 x 25 x 6/3mm
14.25
11.31
22.27
16.28
32.07
Midlands
North
North East
01623 555111
01226 730330
01325 381166
APPROX. SIZE mm
SELF COLOUR
GALVANISED
22g
19g
16g
14g
12g
10g
8g
6g
0.66
0.91
1.52
1.93
2.44
3.00
3.88
4.69
0.70
1.00
1.60
2.00
2.50
3.10
4.00
4.80
Dimensions shown are for galvanised wire.
Weldmesh self-colour specifications will vary between 0.04mm and 0.12mm below the
galvanised wire dimension as shown in the Weldmesh Gauges Guide.
Galvanised Weldmesh
Through our unique smooth inline galvanised process, Weldmesh is hot dip galvanised
to the highest standards and conforms to BS EN 10244-2 Class A. Should a thicker coat
be necessary, i.e. BS EN ISO 1461 (replaces BS729), this can be obtained on request.
Pre-galvanised Weldmesh (mesh made from galvanised wire) can also be produced on
request.
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
Weldmesh and gabions
Weldmesh Concertainer Gabions and Mattresses
The use of gabions as an effective solution to combat erosion and to
stabilise and strengthen embankments has been in evidence for
several centuries.
Rivers, coasts roads and railways can all be subject to continuous or
fluctuating erosion, demanding planned defences that counteract the
forces involved.
Concertainer gabions are used in many modern civil engineering
schemes to provide economic and effective solutions.
In recent years Betafence Ltd have concentrated on quality of
materials, manufacture and installation techniques resulting in
extensive use for civil engineering and architectural applications
where quality and aesthetics are paramount.
All Concertainer gabions and mattresses are BBA certified for Roads
& Bridges and General Building Regulations.
GABIONS
GROUP LRH75
Corrosion Protection
Zincalu Super (95% Zn / 5% Al)
Mesh Size
76.2mm x 76.2mm
Ref:
Gabion Dimensions
Wire diameter
75300GC1
1m x 1m x 0.5m
3mm
75300GC2
1m x 1m x 1m
3mm
75300GC17
1.5m x 1m x 0.5m
3mm
75300GC9
1.5m x 1m x 1m
3mm
75300GC3
2m x 1m x 0.5m
3mm
75300GC4
2m x 1m x 1m
3mm
75300GC5
3m x 1m x 0.5m
3mm
75300GC6
3m x 1m x 1m
3mm
75300GC7
4m x 1m x 0.5m
3mm
75300GC8
4m x 1m x 1m
3mm
Also available in 4.5mm wire and PVC coated on galvanised wire
MATTRESSES
GROUP LRH75
Corrosion Protection
Zincalu Super (95% Zn / 5% Al)
Mesh Size
76.2mm x 76.2mm
Ref:
Mattress Dimensions
Wire diameter
75300MC1
3m x 2m x 0.150m
3mm
75300MC2
3m x 2m x 0.225m
3mm
75300MC7
3m x 2m x 0.300m
3mm
75300MC4
6m x 2m x 0.150m
3mm
75300MC5
6m x 2m x 0.225m
3mm
75300MC3
6m x 2m x 0.300m
3mm
Also available in 4.5mm wire and PVC coated on galvanised wire
Sales offices:
Midlands
North
North East
01623 555111
01226 730330
01325 381166
North West
South
South East
0161 620 1001
01794 521158
020 7474 1800
South West
01752 894660
Scotland
01698 732343
Wales & West 01633 244002
31
Other BRC companies
ISO9001:2000
34
BRC
A division of BRC Limited
CONDITIONS OF SUPPLY
1. Interpretation
1.1 In these Conditions:
"Buyer" means the party which accepts a quotation given to it
by the Seller for the sale of the Goods.
"Conditions" means the standard terms and conditions of
supply set out in this document and (unless the context
otherwise requires) includes any special terms and conditions
agreed in Writing between the Buyer and the Seller.
"Contract" means the contract for the sale and purchase of the
Goods.
"Goods" means the goods set out in the Quotation (including
any instalment of the goods or any part of them) which the
Seller is to supply in accordance with these Conditions.
"Order Confirmation" means confirmation given by the Seller to
the Buyer that the Seller agrees to supply an order of the Buyer
on these Conditions.
"Price" means the price of the Goods.
"Quotation" means a quotation given by the Seller to the Buyer
on the basis of these Conditions.
"Seller" means BRC Limited of Edstone Hall, Wootton Wawen,
Solihull, B95 6DD. Registered in England No. 3721267.
"Specification" includes any plans, drawing, data, formulae,
instructions or other information relating to the Goods.
"Writing" includes facsimile transmission and comparable
means of communication.
1.2
Any reference in the Conditions to a statute or a
provision of a statute shall be construed as a reference to that
statute or provision as amended, re-enacted or extended at the
relevant time.
1.2
The headings in these Conditions are for convenience
only and shall not affect their interpretation.
2. Basis of Purchase
2.1
The Quotation shall constitute an invitation to treat by
the Seller.
2.2
An order submitted by the Buyer shall constitute an
offer by the Buyer to purchase the Goods subject to these
Conditions.
2.3
No order shall be accepted or deemed to be accepted by
the Seller unless and until confirmed in Writing by the Seller’s
authorised representative by way of Order Confirmation.
2.4
All quotations made by the Seller in respect of material
ex-stock are subject to the material being in stock at the time
the Buyer’s order is received and the Seller accepts no liability
should such material be sold before the Buyer’s order is
received.
2.5
The Seller shall supply and the Buyer shall acquire the
Goods in accordance with the Seller’s Order Confirmation
subject to these Conditions, which shall govern the Contract to
the exclusion of any other terms and conditions subject to
which any such quotation is accepted or purported to be
accepted, or any such order is made or purported to be made,
by the Buyer.
2.6
No variation to these Conditions shall be binding unless
agreed in Writing between the authorised representatives of the
Buyer and the Seller.
2.7
The Seller’s employees or agents are not authorised to
make any representations concerning the Goods unless
confirmed by the Seller in Writing. In entering into the Contract
the Buyer acknowledges and agrees that it does not rely on any
such representations which are not so confirmed.
2.8
Any advice or recommendation given by the Seller or its
employees or agents to the Buyer or its employees or agents as
to the storage, application or use of the Goods which is not
confirmed in Writing by the Seller is followed or acted upon
entirely at the Buyer’s own risk, and accordingly the Seller shall
not be liable for any such advice or recommendation which is
not so confirmed.
2.9
Any typographical, clerical or other error or omission in
any sales literature, quotation, price list, acceptance of offer,
Order Confirmation, invoice or other documentation or
information issued by the Seller shall be subject to correction
without any liability on the part of the Seller.
2.10 The Buyer shall be responsible for the efficacy or
otherwise of any information, advice or instructions regarding
the Goods given by the Buyer or attached to the Goods and the
Buyer shall be liable for and shall indemnify the Seller against
all losses, damages, costs and expenses incurred by the Seller
or awarded against the Seller in connection with or arising from
such information, advice or instructions.
2.11 Where the Contact provides for testing and inspection of
the goods before delivery, the Buyer may carry out testing
and/or inspection of the Goods at its own expense and at the
Seller’s producing works within 7 days of notification by the
Seller to the Buyer that the Goods are ready for delivery. The
Buyer shall pay for all test pieces which comply with the
Specification.
2.12 At the expiry of 7 days from the notification referred to in
2.11, the Seller shall be entitled to deliver the Goods to the
Buyer as provided in these Conditions whether or not the Buyer
has carried out any testing or inspection.
3. Orders and Specifications
3.1
No order submitted by the Buyer shall be deemed to be
accepted by the Seller unless and until confirmed in Writing by
the Seller’s authorised representative by way of Order
Confirmation.
3.2
The Buyer shall be responsible to the Seller for ensuring
the accuracy of the terms of any order (including any applicable
specification) submitted by the Buyer, and for giving the Seller
any necessary information relating to the Goods within a
sufficient time to enable the Seller to perform the Contract in
accordance with its terms.
3.3
The quantity, quality and description of the Goods shall,
subject as provided in these Conditions, be as specified in the
Quotation and/or in any applicable Specification supplied by the
Buyer to the Seller or agreed in Writing by the Buyer.
3.4
The Seller reserves the right to make any changes in the
specification of the Goods and the substances, chemicals and
materials used to manufacture the Goods but any such changes
shall not materially affect the quality or performance of the
Goods.
3.5
The Goods shall be supplied subject to the tolerances
set out in the Seller’s catalogue and sales literature when the
Contract is made.
3.6
If the Goods are to be manufactured or any process is to
be applied to the Goods by the Seller in accordance with a
specification submitted by the Buyer, the Buyer shall indemnify
the Seller against all loss, damages, costs and expenses
awarded against or incurred by the Seller in connection with or
paid or agreed to be paid by the Seller in settlement of any
claim for infringement of any patent, copyright, design, trade
mark or other industrial or intellectual property rights of any
other person which results from the Seller’s use of the Buyer’s
specification.
3.7
No order which has been accepted by the Seller may be
cancelled by the Buyer except with the agreement in Writing of
the Seller and on the terms that the Buyer shall indemnify the
Seller in full against all loss (including loss of profit), costs
(including the cost of all labour and materials used), damages,
charges and expenses incurred by the Seller as a result of
cancellation.
7. Risk and Property
7.1
Risk of damage to or loss of the Goods shall pass to the
Buyer:-
4. Price
4.1
Subject to 4.2, the Price shall be the Seller’s ruling price
as at the date of delivery of the Goods. Payment shall be made
in sterling unless otherwise agreed.
7.1.2 in the case of Goods to be delivered otherwise than at
the Seller’s premises, after the time the Goods have left the
Seller’s premises.
4.2
The Seller reserves the right, by giving notice to the
Buyer at any time before delivery, to increase the Price beyond
the ruling price referred to in clause 4.1 to reflect any increase
in the cost to the Seller which is due to any factor beyond the
control of the Seller (such as, without limitation, any foreign
exchange fluctuation, introduction of the Euro. currency
regulation, alteration of duties, significant increase in the costs
of labour, materials and other costs of manufacture), any
change in delivery dates, quantities or specifications for the
Goods which is requested by the Buyer, or any delay caused by
any instruction of the Buyer or failure of the Buyer to give the
Seller adequate information or instructions.
4.3
Except as otherwise stated under the terms of any
quotation and unless otherwise agreed in Writing between the
Buyer and the Seller, the Price shall be on an ex works basis,
and where the Seller agrees to deliver the Goods otherwise
than at the Seller’s premises, the Buyer shall be liable to pay
the Seller’s additional charges for transport, packaging and
insurance.
4.4
The Price and any additional charges payable hereunder
shall be exclusive of any applicable value added tax or other tax
or duty relating to the sale or delivery of the Goods, which the
Buyer shall be additionally liable to pay to the Seller.
4.5
The cost of pallets and containers unless otherwise
agreed in writing between the Buyer and the Seller will be
charged to the Buyer in addition to the Price.
5. Terms of Payment
5.1
Subject to any special terms agreed in Writing between
the Buyer and the Seller, the Seller shall be entitled to invoice
the Buyer for the Price on or at any time after delivery of the
Goods, unless the Goods are to be collected by the Buyer or the
Buyer wrongfully fails to take delivery of the Goods, in which
event the Seller shall be entitled to invoice the Buyer for the
price at any time after the Seller has notified the Buyer that the
Goods are ready for collection or (as the case may be) the
Seller has tendered delivery of the Goods.
5.2
The Buyer shall pay the Price by the last day of the
calendar month following delivery and the Seller shall be
entitled to recover the Price, notwithstanding that delivery
might not have taken place and the property in the Goods has
not passed to the Buyer. The time of payment of the Price shall
be of the essence of the Contract. Receipt for payment will be
issued only upon request.
5.3
All amounts due under these Conditions shall be paid in
full without any deduction or withholding and the Buyer shall
not be entitled to assert any credit set-off or counterclaim
against the Seller in order to justify withholding payment of any
such amount in whole or in part.
5.4
If the Buyer fails to make any payment on the due date
then, without prejudice to any other right or remedy available to
the Seller, the Seller shall be entitled to:
7.1.1 in the case of the Goods to be delivered at the Seller’s
premises, at the time when the Seller notifies the Buyer that
the goods are available for collection; or
7.2
Notwithstanding delivery and the passing of risk in the
Goods, or any other provision of these Conditions, the property
in the Goods shall not pass to the Buyer until the Seller has
received in cash or cleared funds payment in full of the Price
and the price of all other goods and services agreed to be
supplied by the Seller to the Buyer for which payment is then
due.
7.3
Until such time as the property in the Goods passes to
the Buyer, the Buyer shall hold the Goods as the Seller’s
fiduciary agent and bailee, and shall keep the Goods separate
from those of the Buyer and third parties and properly stored
and protected and insured and identified as the Seller’s
property, but shall be entitled to resell or use the Goods in the
ordinary course of its business.
7.4
Until such time as the Property in the Goods passes to
the Buyer (and provided the Goods are still in existence and
have not been resold), the Seller shall be entitled at any time to
require the Buyer to deliver up the Goods to the Seller and, if
the Buyer fails to do so forthwith, to enter upon any premises of
the Buyer or any third party where the Goods are stored and
repossess the Goods.
7.5
The Buyer shall not be entitled to pledge or in any way
charge by way of security for any indebtedness any of the Goods
which remain the property of the Seller, but if the Buyer does
so all moneys owing by the Buyer to the Seller shall (without
prejudice to any other right or remedy of the Seller) forthwith
become due and payable.
7.6
The Seller shall have a first and paramount lien over any
goods or property of the Buyer in its possession for all sums
due and payable to the Seller.
7.7
Risk of damage to or loss of any free issue material
supplied by the Buyer to the Seller shall remain at all time with
the Seller who shall bear full responsibility for insuring or
otherwise safeguarding such material.
8. Warranties and Liability
8.1
Subject to the conditions set out below the Seller
warrants that the Goods will correspond with the Specification
at the time of delivery.
8.2
The above warranty is given by the Seller subject to the
following conditions:
8.2.1 the Seller shall be under no liability in respect of any
defect in the Goods arising from any Specification supplied by
the Buyer;
8.2.2 the Seller shall be under no liability in respect of any
defect arising from fair wear and tear, wilful damage,
negligence, improper or unsuitable storage conditions,
abnormal working conditions, failure to follow the Seller’s
instructions (whether oral or in writing), misuse or alteration of
the Goods without the Seller’s approval;
5.4.1 cancel the Contract or suspend any further deliveries to
the Buyer;
8.2.3 the Seller shall be under no liability under the above
warranty (or any other warranty, condition or guarantee) if the
total Price has not been paid by the due date for payment;
5.4.2 appropriate any payment made by the Buyer to such of
the Goods or the Services (or the goods or services supplied
under any other contract between the Buyer and the Seller) as
the Seller may think fit (notwithstanding any purported
appropriation by the Buyer); and
8.2.4 the above warranty does not extend to goods or
materials not manufactured by the Seller, in respect of which
the Buyer shall only be entitled to the benefit of any such
warranty or guarantee as is given by the manufacturer to the
Seller.
5.4.3 charge the Buyer interest from the due date up to the
date of actual payment in full (both before and after any
judgement) on the amount unpaid, at the rate of 4 per cent per
annum above Barclays Bank base rate from time to time. Such
interest shall accrue on a daily basis and be compounded
quarterly.
8.3
Subject as expressly provided in these Conditions all
warranties, conditions or other terms implied by statute or
common law are excluded to the fullest extent permitted by
law.
6. Delivery
6.1
Delivery of the Goods shall be made by the Buyer
collecting the Goods at the Seller’s premises at any time after
the Seller has notified the Buyer that the Goods are ready for
collection on payment of the collection charge then specified in
the Seller’s price list or, if some other place for delivery is
agreed by the Seller, the Seller delivery the Goods to that place.
6.2
In the event that the Seller is to deliver the Goods other
than by making the same available for collection at its
producing works, the method of carriage shall, unless
otherwise agreed in Writing, be at the discretion of the Seller.
Any transport or freight arranged or undertaken by the Seller
shall be arranged or undertaken as agent for the Buyer and the
Seller shall have no liability for any loss or damage to the
Goods after the same have left the Seller’s premises. The
Seller may supply the Goods from any of its producing works.
6.3
The Seller shall only be obliged to deliver the Goods to a
safe and suitable site at the place of delivery such as an area of
hard standing. The Seller shall decide in its absolute
discretion upon the safeness and suitability of any such site.
6.4
The Seller reserves the right to charge to the Buyer any
costs, charges or expenses incurred by the Seller as a result of
vehicle detention or demurrage of ships in consequence of any
act or omission of the Buyer, its employees or agents, or as a
result of special requirements or stipulations of the Buyer not
provided for in the Contract.
6.5
Any dates quoted for delivery of the Goods are
approximate only and the Seller shall not be liable for any delay
in delivery of the Goods howsoever caused. Time for delivery
shall not be of the essence of the Contract. The Goods may be
delivered by the Seller in advance of the quoted delivery date
upon giving reasonable notice to the Buyer.
6.6
Where the Goods are to be delivered in instalment, each
delivery shall constitute a separate contract and failure by the
Seller to deliver any one or more of the instalments in
accordance with these Conditions or any claim by the Buyer in
respect of any one or more instalments shall not entitle the
Buyer to treat the Contract as a whole as repudiated.
6.7
If the seller fails to deliver the Goods (or any instalment)
for any reason other than any cause beyond the Seller’s
reasonable control or the Buyer’s fault, and the Seller is
accordingly liable to the Buyer, the Seller’s liability shall be
limited to the excess (if any) of the cost to the Buyer (in the
cheapest available market) of similar goods to replace those
not delivered over the Price.
6.8
If the Buyer fails to take delivery of the Goods within 7
days of notification that the Goods are ready for collection or
fails to give the Seller adequate delivery instructions at the time
stated for delivery (otherwise than by reason of any cause
beyond the Buyer’s reasonable control or by reason of the
Seller’s fault) then, without prejudice to any other right or
remedy available to the Seller, the Seller may:
6.8.1 deliver the Goods to the Buyer’s address on the Buyer’s
order; or
8.4
Any claim by the Buyer which is based on any failure of
the Goods to correspond with the Specification shall (whether
or not delivery is refused by the Buyer) be notified to the Seller
within 7 days from the date of delivery or (where the defect or
failure was not apparent on reasonable inspection) within a
reasonable time after discovery of the defect or failure and in
any event within 30 days of delivery. If delivery is not refused,
and the Buyer does not notify the Seller accordingly, the Buyer
shall not be entitled to reject the Goods and the Seller shall
have no liability for such defect or failure, and the Buyer shall
be bound to pay the Price as if the Goods had been delivered in
accordance with the Contract.
8.5
Where any valid claim in respect of any of the Goods
which is based on any defect in quality or condition thereof or
their failure to meet the Specification is notified to the Seller in
accordance with these conditions the Buyer shall give the Seller
a reasonable opportunity to inspect the Goods prior to use or
processing. The Seller shall be entitled to replace the Goods
(or the part in question) free of charge or, at the Seller’s sole
discretion, refund to the Buyer the Price (or a proportionate
part of the price), but the Seller shall have no further liability to
the Buyer.
8.6
Except in respect of death or personal injury caused by
the Seller’s negligence, the Seller shall not be liable to the
Buyer by reason of any implied warranty, condition or other
term, or any duty at common law, or under the express terms
of the contract, for any indirect, special or consequential loss or
damage (whether for loss of profit or otherwise), cost, expenses
or other claims for compensation whatsoever (whether caused
by the negligence of the Seller, its employees or agents or
otherwise) which arise out or in connection with the supply of
the Goods or their use or resale by the Buyer, and the entire
liability of the Seller under or in connection with the contract
shall not exceed the Price, except as expressly provided in
these Conditions.
8.7
The Buyer acknowledges and accepts that it does not
rely on, and shall have no remedy in respect of, any statement,
representation, warranty or understanding (whether negligently
or innocently made) of any person (whether party to the
Contract or not) other than as expressly set out in these
Conditions as a warranty. Nothing in this clause shall,
however, operate to limit or exclude any liability for fraud.
8.8
The Seller shall not be liable to the Buyer or be deemed
to be in breach of the Contract by reason of any delay in
performing, or any failure to perform, any of the Seller’s
obligations in relation to the Goods, if the delay or failure was
due to any cause beyond the Seller’s reasonable control.
Without prejudice to the generality of the foregoing, the
following shall be regarded as causes beyond the Seller’s
reasonable control:
8.8.1
8.8.3 acts, restrictions, regulations, bye-laws, prohibitions or
measures of any kind on the part of any governmental,
parliamentary or local authority;
8.8.4
6.8.2 store the Goods until actual delivery and charge the
Buyer for the reasonable costs (including insurance) of storage:
or
6.8.3 sell the Goods at the best price readily obtainable and
(after deducting all reasonable storage and selling expenses)
charge the Buyer for any shortfall below the price under the
Contract.
Act of God, explosion, flood, tempest, fire or accident;
8.8.2 war or threat or war, sabotage, insurrection, civil
disturbance or requisition;
import or export regulations or embargoes;
8.8.5 strikes, lock-outs or other industrial actions or trade
disputes (whether involving employees of the Seller or of a third
party);
8.8.6 difficulties in obtaining raw material, labour, fuel, parts
or machinery
8.8.7 power failure or breakdown in machinery or computer
equipment;
8.8.8
failure of sub-contractors.
8.9
In the event that any of the circumstances referred to in
8.8 continue for a continuous period of 30 days and is
continuing at the end of that time to such an extent that
substantial performance of the contract is prevented then
either the Buyer or the Seller shall be entitled to give written
notice terminating the contract with immediate effect. In the
event that the contract is so terminated, the Seller shall be
entitled to be paid in full for all work completed to the date of
termination and a fair proportion for any work partially
completed.
8.10 The Seller shall endeavour to ensure that its business
systems are year 2000 compliant but does not make any
representations nor give any warranties in respect of such
compliance. The Seller shall not be liable to the Buyer or be
deemed to be in breach of the Contract by reason of any delay
in performing or any failure to perform any of the Seller’s
obligations in relation to the delivery of the Goods, if the delay
or failure arises from or is connected to the changes arising
before, during or after the year 2000
9. Insolvency of Buyer
9.1
This clause applies if:
9.1.1 the Buyer makes any voluntary arrangement with its
creditors or (being an individual or firm) becomes bankrupt or
(being a company) becomes subject to an administration order
or goes into liquidation (otherwise than for the purposes of
amalgamation or reconstruction); or
9.1.2 an encumbrancer takes possession, or a receiver is
appointed, of any of the property or assets of the Buyer: or
9.1.3 the Buyer ceases, or threatens to cease, to carry on
business or (being a company) is wound up or dissolved (and
no such step shall be taken by or on behalf of the Buyer without
the Seller being given at least 5 business days’ prior written
notice thereof); or
9.1.4 steps are taken, proposed or threatened in respect of
any of the events mentioned above or the Seller reasonably
apprehends that any of the events mentioned above is about to
occur in relation to the Buyer and notifies the Buyer
accordingly.
9.2
If this clause applies then, without prejudice to any other
right or remedy available to the Seller, the Seller shall be
entitled to cancel the Contract or suspend any further
deliveries under the Contact without liability to the Buyer, and if
the Goods have been delivered but not paid for the Prices shall
become immediately due and payable notwithstanding any
previous agreement or arrangement to the contrary.
10. Export Terms
10.1 Where the Goods are supplied for export from the United
Kingdom, the provisions of this clause 11 shall (subject to any
special terms agreed in writing between the Buyer and the
Seller) apply notwithstanding any other provision of these
Conditions.
10.2 The Buyer shall be responsible for complying with any
legislation or regulations governing the importation of the
Goods into the country of destination and for the payment of
any duties on them.
10.3 The Buyer shall be responsible for arranging for testing
and inspection of the Goods at the Seller’s premises before
shipment. The Seller shall have no liability for any claim in
respect of any defect in the Goods which would be apparent on
inspection and which is made after shipment, or in respect of
any damage during transit.
10.4 Unless otherwise agreed in Writing between the Buyer
and the Seller, the Goods shall be delivered FOB the air or sea
port of shipment and the Seller shall be under no obligation to
give notice under section 32(3) of the Sale of Goods Act 1979.
10.5 Any marine insurance required to be effect by the Seller
under the Contract shall, unless otherwise agreed in writing, be
10% over the invoice price and shall cover the interest from the
commencement of transit to the destination named in the
Contract as provided and contained in the Institute of London
Underwriters ("the Institute") Cargo Clauses, the Institute’s War
Clauses and the Institute’s Strikes, Riots and Civil Commotion
Clauses, current at the time of shipment.
11. ECSC
11.1 The Order must show the final destination of the Goods
and this destination may not be altered without the prior
written consent of the Seller.
11.2 The goods are sold on the condition that they will not be
re-sold by the Buyer or its buyers or sub-buyers for delivery in
an unprocessed state outside the Territory of the ECSC. The
Buyer shall be responsible for any breach of this condition and
the Buyer shall also be responsible for ensuring that no goods
sold to him by the Seller for delivery outside the ECSC shall be
re-imported in an unprocessed state into the ECSC either by
the Buyer or any of its buyers or sub-buyers. On receipt of a
written demand from the Seller, the Buyer shall produce
evidence of the ultimate destination of the Goods.
11.3 If the Buyer re-sells in an unprocessed state any goods
bought from the Seller then, unless such resale is made from
stock, the Buyer shall comply in respect of such resale with the
requirement of High Authority Decision NO. 30/53 (as amended
from time to time) and also comply, as appropriate, with High
Authority Decision No. 31/53 (as amended from time to time) or
High Authority Decision No. 37/54 (as amended from time to
time) and also comply with all other applicable requirements
from time to time of the High Authority or of the European
commission. The references in this Condition of the High
Authority are to the High Authority of the ECSC constituted by
the Treaty of Paris of 18 April 1951.
12. General
12.1 Any notice required or permitted to be given by either
party to the other under these Conditions shall be in Writing
addressed to that other party at its registered office or principal
place of business or such other address as may at the relevant
time have been notified pursuant to this provision to the party
giving notice.
12.2 No waiver by the Seller of any breach of the Contract by
the Buyer shall be considered as a waiver of any subsequent
breach of the same or any other provision.
12.3 If any provision of these Conditions is held by any
competent authority to be invalid or unenforceable in whole or
in part the validity of the other provisions of these conditions
and the remainder of the provision in question shall not be
affected.
12.4 The Contract shall be governed by the laws of England,
and the Buyer agrees to submit to the exclusive jurisdiction of
the English courts.
www.brc.ltd.uk
Scotland
North East
BRC Newhouse
Block 14, Newhouse Industrial Estate,
Newhouse, Motherwell ML1 5SE
Tel: 01698 732343
Fax: 01698 833894
Email: sales@scotland.brc.ltd.uk
BRC Darlington
Skerne Works, Dodsworth Street, Albert Hill,
Darlington, County Durham DL1 2NG
Tel: 01325 381166
Fax: 01325 284124
Email: sales@northeast.brc.ltd.uk
North West
North
BRC Oldham
Gould Street, Oldham,
Lancashire OL1 3LZ
Tel: 0161 620 1001
Fax: 0161 620 1660
Email: sales@northwest.brc.ltd.uk
BRC Barnsley
Whaley Road, Barugh, Barnsley,
South Yorkshire S75 1HT
Tel: 01226 730330
Fax: 01226 771797
Email: sales@north.brc.ltd.uk
Midlands
Wales & West
BRC Mansfield
79 Station Road, Sutton in Ashfield, Mansfield,
Nottinghamshire NG17 5FR
Tel: 01623 555111
Fax: 01623 440932
Email: sales@midlands.brc.ltd.uk
BRC Newport
Corporation Road, Newport,
Gwent NP19 4RD
Tel: 01633 280816
Fax: 01633 283469
Email: sales@walesandwest.brc.ltd.uk
South East
South
BRC London
Unit 13, Kierbeck Business Complex,
North Woolwich Road, Silvertown, London E16 2BG
Tel: 020 7474 1800
Fax: 020 7474 8686
Email: sales@southeast.brc.ltd.uk
BRC Southampton
Belbins Business Park, Cupernham Lane,
Romsey, Hampshire SO51 7JF
Tel: 01794 521158
Fax: 01794 521154
Email: sales@south.brc.ltd.uk
South West
BRC Plymouth
Unit C, Kingsley Close, East Way, Lee Mill Trading
Estate, Ivybridge, Plymouth, Devon PL21 9LL
Tel: 01752 894660
Fax: 01752 896761
Email: sales@southwest.brc.ltd.uk
Finance office
BRC Wokingham
11 Mulberry Business Park, Fishponds Road,
Wokingham, Berkshire RG41 2FH
Tel: 0118 977 3822
Fax: 0118 977 3913
Email: enquiries@wokingham.brc.ltd.uk
BRC Special Products
Carver Road, Astonfields Industrial Estate,
Stafford ST16 3BP
Tel: 01785 222288
Fax: 01785 240029
Email: stafford.enquiries@brc-special-products.co.uk
Website: www.brc-special-products.co.uk
Weldgrip Geotechnical
Unit 19, Redbrook Business Park, Wilthorpe Road,
Barnsley, South Yorkshire S75 1JN
Tel: 01226 280567
Fax: 01226 731563
Email: tech@weldrip.com
Website: www.weldgrip.com
VIRCO-03.06
Other BRC companies