Type
Catalog #
Project
LEDH-310ICA
Date
Prepared by
3.5” Low Voltage LED IC Rated New Construction Recessed Housing
MR16 LED Blub
4-13/16”
(123mm)
DESCRIPTION
The LEDH-310ICA is 3.5” low voltage LED housing for accent
task lighting.
APPLICATION
The LEDH-310ICA is designed for insulated ceilings and can be
in direct contact with insulation material. The LEDH-310ICA
offers a wide choice of trim types including reflector, lensed and
wall wash trims. This AIR-TIGHT housing design prevents airflow
through the ceiling, helping save on heating and cooling costs.
DESIGN FEATURES
Housing
•Galvanized steel housing painted white.
• 5-1/2” height allows use in 2”X6” joist construction.
• Housing adjusts for ceilings up to 1-1/4” thick.
Junction Box
• Listed for through branch circuit wiring.
(Max.8 No 12 AWG 90˚C branch circuit conductors.(4 in, 4 out))
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
Ceiling Cut-out : 3-7/8”
Lamp, Max, Watt. : 12.2W
Listing ETL listed for damp location.
Recommended Dimmer
* Lutron: D i v a(Dv-600P)
Skylark( S -600P)
Ariadni(AY-600P)
Consult tech. service or factory
for additional dimmers
Mounting Frame
• Galvanized steel construction.
• 8” L X 5-1/2” W
Transformer
• 120V magnetic transformer steps line voltage down to lamp operating voltage for
lamps up to 15W Max.
• Available 277V-12V transformer.
Lamp
• LED MR16 12V 12.2W Max.(Not Included)
Bar Hangers
• Maximum extension of 24” allows for extra distance between joists.
• Housing can be positioned at any point within 24” joist span.
• Score lines allow “tooless” shortening for 12” joists. Bar hangers may be repositioned
90 degrees.
• Integral T-bar clips snaps onto T-bars and no additional clips are required.
Socket
• GU5.3 Ceramic Bi-Pin Socket.
Optional “Quick Connect” Push-in wire connectors.
• Three “Quick Connectors”
• Pre-installed push-in wire connectors for fast and easy wiring.
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
Project
LEDH-310ICAR
3.5” Low Voltage LED IC Rated Remodel Recessed Housing
DESCRIPTION
Date
Prepared by
MR16 LED Blub
4-13/16”
(123mm)
The LEDH-310ICAR is 3.5” low voltage LED remodel
housing for accent task lighting.
APPLICATION
The LEDH-310ICAR is designed for insulated ceilings and can be
in direct contact with insulation material. The LEDH-310ICAR
offers a wide choice of trim types including reflector, lensed and
wall wash trims. This AIR-TIGHT housing design prevents airflow
through the ceiling, helping save on heating and cooling costs.
DESIGN FEATURES
Housing
•Galvanized steel housing painted white.
• 5-1/2” height allows use in 2”X6” joist construction.
• Housing adjusts for ceilings up to 1/2” thick.
Junction Box
• Listed for through branch circuit wiring.
(Max.8 No 12 AWG 90˚C branch circuit conductors.(4 in, 4 out))
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
Ceiling Cut-out : 3-7/8”
Lamp, Max, Watt. : 12.2W
Recommended Dimmer
* Lutron: D i v a(Dv-600P)
Skylark( S -600P)
Ariadni(AY-600P)
Consult tech. service or factory
for additional dimmers
Transformer
• 120V magnetic transformer steps line voltage down to lamp operating voltage for lamps
up to 15W Max.
• Available 277V-12V transformer.
Socket
• GU5.3 Ceramic Bi-Pin Socket.
Lamp
• LED MR16 12V 12.2W Max.(Not Included)
Remodel Clips
• 4 remodel clips secure housing and accommodates 1/2” and 5/8“ ceiling materials.
Optional “Quick Connect” Push-in wire connectors.
• Three “Quick Connectors”
• Pre-installed push-in wire connectors for fast and easy wiring.
Listing ETL listed for damp location.
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
TRIMS
For LEDH-310ICA, LEDH-310ICAR
MR16 LED Blub
LT-350WH
LT-350CH
LT-350SN
LT-351WH
LT-351CH
LT-351MO
LT-352WH
LT-352WH-B
LT-352BK
LT-354CL
LT-354CL-CH
LT-354WH
LT-355WH
LT-355BK
LT-355BK-CH
LT-358BK
LT-358BK-SN
Adjustable
Adjustable Baffle
Baffle
LT-358BK-MO
LT-359CL
LT-359BK-SN
LT-359BK-MO
LT-360WH
LT-360SN
LT-360MO
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
TRIMS
For LEDH-310ICA, LEDH-310ICAR
MR16 LED Blub
Adjustable
LT-361WH
LT-361PB
LT-361MO
LT-362WH
LT-362BK
LT-352SN
LT-364WH
LT-364BK-SN
LT-364BK-MO
ORDERING INFORMATION
Housing
Trim
LEDH-310ICA
LEDH-310ICAR
LT-350
LT-351
LT-352
LT-354
LT-355
LT-358
Reflector
LT-359
LT-360
LT-361
LT-362
LT-364
-CL : clear
-WH : white
-GD : gold
-MA : matte platinum
-CP : champagne
-PR : pewter
-HC : haze clear
Baffle
Metal Ring
-WH : white
-CH : chrome
-BK : black
-UN : natural steel
-SN : satin nickel
-PB : polished brass
-AN : antique nickel
-AC : antique copper
-MO : mocha
-CA : cappuccino
-WH : white
-CH : chrome
-BK : black
-UN : natural steel
-SN : satin nickel
-PB : polished brass
-AN : antique nickel
-AC : antique copper
-MO : mocha
-CA : cappuccino
Example : LEDH-310ICA-LT-361-WH
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
Project
LEDH-410ICA
Date
Prepared by
4” Low Voltage LED IC Rated New Construction Recessed Housing
MR16 LED Blub
5-1/2”
(140mm)
DESCRIPTION
The LEDH-410ICA is 4” low voltage LED housing for accent task
lighting.
APPLICATION
The LEDH-410ICA is designed for insulated ceilings and can be
in direct contact with insulation material. The LEDH-410ICA
offers a wide choice of trim types including reflector, lensed and
wall wash trims. This AIR-TIGHT housing design prevents airflow
through the ceiling, helping save on heating and cooling costs.
DESIGN FEATURES
Housing
•Single wall aluminum housing.
• 5-1/2” height allows use in 2”X6” joist construction.
• Housing adjusts for ceilings up to 1-1/4” thick.
Junction Box
• Listed for through branch circuit wiring.
(Max.8 No 12 AWG 90˚C branch circuit conductors.(4 in, 4 out))
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
Ceiling Cut-out : 4-3/8”
Lamp, Max, Watt. : 12.2W
Listing ETL listed for damp location.
Recommended Dimmer
* Lutron: D i v a(Dv-600P)
Skylark( S -600P)
Ariadni(AY-600P)
Consult tech. service or factory
for additional dimmers
Mounting Frame
• Galvanized steel construction.
• 8” L X 5-1/2” W
Transformer
• 120V magnetic transformer steps line voltage down to lamp operating voltage for
lamps up to 15W Max.
• Available 277V-12V transformer.
Lamp
• LED MR16 12V 12.2W Max.(Not Included)
Bar Hangers
• Maximum extension of 24” allows for extra distance between joists.
• Housing can be positioned at any point within 24” joist span.
• Score lines allow “tooless” shortening for 12” joists. Bar hangers may be repositioned 90 degrees.
• Integral T-bar clips snaps onto T-bars and no additional clips are required.
Socket
• GU5.3 Ceramic Bi-Pin Socket.
Optional “Quick Connect” Push-in wire connectors.
• Three “Quick Connectors”
• Pre-installed push-in wire connectors for fast and easy wiring.
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
Project
LEDH-410ICAR
4” Low Voltage LED IC Rated Remodel Recessed Housing
DESCRIPTION
Date
Prepared by
MR16 LED Blub
5-5/8”
(142.3mm)
The LEDH-410ICAR is 4” low voltage LED remodel
housing for accent task lighting.
APPLICATION
The LEDH-410ICAR is designed for insulated ceilings and can be
in direct contact with insulation material. The LEDH-410ICAR
offers a wide choice of trim types including reflector, lensed and
wall wash trims. This AIR-TIGHT housing design prevents airflow
through the ceiling, helping save on heating and cooling costs.
DESIGN FEATURES
Housing
•Single wall aluminum housing.
• 5-1/2” height allows use in 2” X 6” joist construction.
• Housing adjusts for ceilings up to 1-1/2” thick.
Junction Box
• Listed for through branch circuit wiring.
(Max.8 No 12 AWG 90˚C branch circuit conductors.(4 in, 4 out))
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
Ceiling Cut-out : 4-3/8”
Lamp, Max, Watt. : 12.2W
Recommended Dimmer
* Lutron: D i v a(Dv-600P)
Skylark( S -600P)
Ariadni(AY-600P)
Consult tech. service or factory
for additional dimmers
Transformer
• 120V magnetic transformer steps line voltage down to lamp operating voltage for
lamps up to 15W Max.
• Available 277V-12V transformer.
Socket
• GU5.3 Ceramic Bi-Pin Socket.
Lamp
• LED MR16 12V 12.2W Max.(Not Included)
Remodel Clips
• 3 remodel clips secure housing and accommodates 1/2” and 5/8“ ceiling materials.
Optional “Quick Connect” Push-in wire connectors.
• Three “Quick Connectors”
• Pre-installed push-in wire connectors for fast and easy wiring.
Listing ETL listed for damp location.
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
TRIMS & PHOTOMETRIC REPORT
For LEDH-410ICA, LEDH-410ICAR
MR16 LED Blub
TRIMS
Adjustable Baffle
LT-42-WH
LT-42-BK
LT-42-CH
LT-44-CL
LT-44-GD
LT-44BK-MO
LT-43WH
LT-43PB
LT-43MO
LT-47WH
LT-47CH
LT-47MO
LT-48WH
LT-48SN
LT-48AN
Adjustable
Eyeball
Adjustable
Baffle
LT-49WH
LT-48SN
LT-49MO
LT-410WH
LT-410BK
LT-410BK-MO
LT-411WH
LT-411SN
LT-411MO
Baffle
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
TRIMS & PHOTOMETRIC REPORT
For LEDH-410ICA, LEDH-410ICAR
MR16 LED Blub
TRIMS
Eyeball
Baffle
LT-416WH
LT-416BK
LT-416BK-PB
LT-418WH
LT-418BK
LT-419BK-SN
Baffle
LT-417WH
LT-46WH
LT-417BK
ORDERING INFORMATION
Housing
Trim
LEDH-410ICA
LEDH-410ICAR
LT-42
LT-43
LT-44
LT-47
LT-48
LT-49
Reflector
LT-410
LT-411
LT-416
LT-418
LT-46
LT-417
-CL : clear
-WH : white
-GD : gold
-MA : matte platinum
-CP : champagne
-PR : pewter
-HC : haze clear
Baffle
Metal Ring
-WH : white
-CH : chrome
-BK : black
-UN : natural steel
-SN : satin nickel
-PB : polished brass
-AN : antique nickel
-AC : antique copper
-MO : mocha
-CA : cappuccino
-WH : white
-CH : chrome
-BK : black
-UN : natural steel
-SN : satin nickel
-PB : polished brass
-AN : antique nickel
-AC : antique copper
-MO : mocha
-CA : cappuccino
Example : LEDH-410ICA-LT-42-WH
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
Project
Date
Prepared by
Designed as a direct retrofit to most MR16 lighting fixtures
6W LED lamp, for replacement of 50W halogen lamp
High energy efficiency
High quality light with a color rendering index of 80
Suitable for use in totally enclosedluminaires
Product Offering
Type reference
E9564F-M16-6-827
E9564F-M16-6-830
Wattage
CCT
Luminous
Beam Angle
6W
6W
2700K
3000K
450Lm
450Lm
25° / 40°
25° / 40°
1. Features and Benefits
6W GU5.3 base LED lamp as high-quality
25°, 40° beam angle
12V AC/DC input voltage
Available in two different color temperatures:
▷ 2700K – warm white
▷ 3000K – warm white
40,000 hours lifetime
UV,NIR radiation free and Mercury free
3years Lum-Tech Lighting warranty
2. Common Characteristics ²
Average
lifetime ³
Starting
time
Switching cycles
(30s on, 30s off)
Warm up time
for 60% light
Working
Conditions
Tc temperature max ⁴
Mercury
max
40,000H
0.02s
1,000,000
None
-20~40℃
90℃
0.0mg
LED Brand
Length
Diameter
Weight
Input voltage
Nominal current
(12VAC/60HZ)
Power
Power
factor
CREE
46.5mm
50mm
52g
12VAC/DC
1.0A max
6W
> 0.75
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
LEDH-3110ICA
Type
Catalog #
3.5” LED IC/AIR-TIGHT Recessed down light for new construction
Project
LEDH-3110
Date
Prepared by
3.5” LED NON-IC Recessed down light for new construction
3.5” COB LED
5-1/2”
(140mm)
8”
(203mm)
25"
Height : 5-1/2”
Ceiling Cut-out: 3-7/8”
DESCRIPTION
LEDH-3110ICA and LEDH-3110 is designed to apply with IC and Non-IC type 3.5” aperture down-light. LED engine is designed to maintain
70% average lumen at 50,000hr or 3 years life installed even in the ceiling completely insulated and air sealed housing. Non-IC rated housing
must be kept 3” from insulation. Equivalent light output to 35W MR16 lamp. Suitable for Wet Location.
DESIGN FEATURES
Housing
• Galvanized steel housing with black-painted.
• Housing can be adjustable for ceiling thickness up to 1-1/4”
Junction Box
• Listed for through branch circuit wiring.(Max.8 No 12 AWG 90˚C branch circuit conductors.)
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
• Provided listed quick connectors for easy snap-in wires. (Optional)
Bar Hangers
• 24” Bar Hangers provide stability and support on joists and T-Bar Grid ceilings.
• Housing can be positioned at any point within 24” joist span.
• Score lines allow “tooless” shortening for 12” joists.
Trims
• Available with baffle trims in white or black painted and haze clear reflectors.
See “Trims” spec sheet for selection or ordering information.
• Available in the (2) different upper reflectors for each be MED(Medium spot beam)-30˚,
WFL(Wide flood spot beam)-45˚
Optics
• Glass Lens: Textured fine surface of tempered glass providing high lumen transmission
and diffusion for even illumination.
LED Engine
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
• Electrical Connection: LED lamp module is replaceable via on-board quick disconnect
terminal (No tools required).
Electrical connection;
• Provided with quick connector between LED module and housing for easy plug and play installation.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
max. 23 fixtures per a dimmer switch 300W loaded.
Warranty
• 50,000hr of lamp life.
SPECIFICATION
LED Quantity
Input Voltage
Wattage (+/-5%)
Lu me n (+/-5%)
Efficacy(LPW) (+/-5%)
Color (+/-5%)
C R I (Typical)
Reflector Beam Angle
Dimming
Lamp Life
Environment
1EA (COB)
120V AC
10.6 W
430 lm
40.6 lm/W
2700K, 3000K, 4000K
80
25˚
Triac
50,000hr
Damp & Wet Location
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
• Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
Consult tech. service or factory for additional dimmers
Driver on Board
LED downlighting
Listing cCSA-us Certificated
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
LEDH-3110ICAR
3.5” LED IC/AIR-TIGHT Recessed down light for Remodeling
LEDH-3110R
Type
Catalog #
Project
Date
Prepared by
3.5” LED NON-IC Recessed down light for Remodeling
3.5” COB LED
5-5/16"
(134.8mm)
Height : 5-5/16”
Ceiling Cut-out : 3-7/8”
DESCRIPTION
LEDH-3110ICAR and LEDH-3110R is designed to apply with IC and Non-IC type 3.5” aperture down-light. LED engine is designed to maintain
70% average lumen at 50,000hr or 3 years life installed even in the ceiling completely insulated and air sealed housing. Non-IC rated housing
must be kept 3” from insulation. Equivalent light output to 35W MR16 lamp. Suitable for Wet Location.
DESIGN FEATURES
Housing
• Galvanized steel housing with black-painted.
Junction Box
• Listed for through branch circuit wiring.(Max.8 No 12 AWG 90˚C branch circuit conductors.)
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
• Provided listed quick connectors for easy snap-in wires. (Optional)
SPECIFICATION
LED Quantity
Input Voltage
Wattage (+/-5%)
Lu me n (+/-5%)
Efficacy(LPW) (+/-5%)
Color (+/-5%)
Remodel Clips
• 3 remodel clips secure housing and accommodates 1/2" and 5/8" ceiling materials.
C R I (Typical)
Reflector Beam Angle
Trims
• Available with baffle trims in white or black painted and haze clear reflectors.
See “Trims” spec sheet for selection or ordering information.
• Available in the (2) different upper reflectors for each be MED(Medium spot beam)-30˚,
WFL(Wide flood spot beam)-45˚
Dimming
Lamp Life
Environment
1EA (COB)
120V AC
10.6 W
430 lm
40.6 lm/W
2700K, 3000K, 4000K
80
25˚
Triac
50,000hr
Damp & Wet Location
Trailing Edge Dimmer
- Lutron® Model Numbers :
Optics
• Glass Lens: Textured fine surface of tempered glass providing high lumen transmission
and diffusion for even illumination.
LED Engine
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
• Electrical Connection: LED lamp module is replaceable via on-board quick disconnect
terminal (No tools required).
Electrical connection;
• Provided with quick connector between LED module and housing for easy plug and play installation.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
max. 23 fixtures per a dimmer switch 300W loaded.
Warranty
• 50,000hr of lamp life.
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
•
Consult tech. service or factory for additional dimmers
Driver on Board
LED downlighting
Listing cCSA-us Certificated
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
TRIMS & PHOTOMETRIC REPORT
For LEDH-3110(R), LEDH-3110ICA(R)
3.5” COB LED
TRIMS
painted
LEDT-C34-WH
Baffle
LEDT-C32-WH
PHOTOMETRIC REPORT * Contact Factory for IES File
[LEDH-3110ICA-30+LEDT-C34-30]
ORDERING INFORMATION
Housing
Color Temp.
LEDH-3110
LEDH-3110ICA
LEDH-3110R
LEDH-3110ICAR
-27 : 2700K
-30 : 3000K
-40 : 4000K
Example : LEDH-3110ICA-30-DOB
Driver
Trim
-DOB: 120V Driver on Board
(dimmable with any Line
or Low Voltage Dimmer)
LEDT-C34
LEDT-C32
Reflector finish
-HC : haze clear
-P R : pewter
-CP : champane
-WH: white painted
Baffle & Metal Ring finish
-WH: white
-BK : black
-SN: satin nickel
-AN: antique nickel
-AC: antique copper
-MO: mocha
-CA: cappuccino
-CH: chrome
-UN: natural steel
- PB: polished brass
Example : LEDT-C34-HC-WH
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
LEDH-NCR4ICA-DOB
Project
4” Line Voltage LED Recessed Housing with Baffle Trim
NON-IC type New Construction or Remodel Application
Prepared by
Date
4” LED
DESCRIPTION
Ceiling Cut-out : 4-1/4”
4” aperture promotional LED housing with 120V, 10W AC LED Module, integral triac dimmable by most of leading and trailing edge dimmer
switches in the market. The LEDH-NCR4ICA-DOB is designed for use in new construction or remodel applications with insulated ceilings.
Thermally protected, Suitable for wet location.
DESIGN FEATURES
LED Module&Trim
• Durable die-casting aluminum heat sink with intergrated trim in one-piece.
• Module construction includes LED, heat sink, lens, baffle trim.
• White paint finish standard. Available in black baffle with white flange.
SPECIFICATION
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
• Sealed for wet location to use in shower room.
Mounting
• Provided plaster frame (7-1/8” x 7-1/8“) for new construction.
• (2)mounting chips on trim module for use of remodeling version.
• HB-6 bar hangers are option to use of new contruction.
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
C R I (Typical)
10 W
80 CRI
90 CRI
Lu me n (+/-5%)
Efficacy (LPW)
600 lm
60 lm/W
480 lm
48 lm/W
Color (+/-5%)
Beam Angle
Dimming
2700K, 3000K, 4000K
102.7˚
Triac
Lamp Life
Environment
50,000 hr
Electrical connection;
• J-box: - Installed on the top of fixture with (5)1/2” knockout.
- Listed for through branch circuit wiring.(max. 4 No. 12 AWG 90˚C Conductions.)
- Ground wire provided.
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge Triac dimmer switches in themarket.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
max. 23 fixtures per a dimmer switch 300W loaded.
Packing
• 12 individual color box in master carton.
Warranty
• 50,000hr of lamp life.
Listing -ETL Listed.
-State of california Title 24
-Energy star Approved & Listed
Damp & Wet Location
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
Diva®
•
Consult tech. service or factory for additional dimmers
Accessories
• Hanger bars for use with housing plate in
new construction applications
Driver on Board
LED downlighting
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
Project
LEDH-RT4ICA
4” LED IC/AIR-TIGHT Recessed down light for new
construction
Date
Prepared by
4” LED
5-9/16”
(141mm)
6-3/8”
(162mm)
DESCRIPTION
8-1/8”
(207mm)
4-1/4”
(109mm)
4-1/4”
(109mm)
LEDH-RT4ICA housing designed for use with a separate LED engine kit that is
intergraled with heat sink and trims and compatible 4” LED trims.The This
fixture offer easy and fast installation using a disconnect device and held
securely in the housing with two friction blade bracket.
Height : 5-9/16”
Housing Aperture : 4-1/4”
Ceiling Cut-out : 4-3/8”
DESIGN FEATURES
Housing
• Single wall aluminum housing gasketed for IC/Air-Tight in insulated ceiling.
• Housing can be adjustable for ceiling thickness up to 1-1/4”
LED Module&Trim
• Two-piece interchangable trim to reflector or baffle.
• Module construction includes LED, heat sink, lens, baffle trim.
• white paint finish standard. Available in black baffle with white flange.
Junction Box
• Listed for through branch circuit wiring.(Max.8 No 12 AWG 90˚C branch circuit conductors.)
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
• Provided listed quick connectors for easy snap-in wires. (Optional)
Bar Hangers
• 24” Bar Hangers provide stability and support on joists and T-Bar Grid ceilings.
• Housing can be positioned at any point within 24” joist span.
• Score lines allow “tooless” shortening for 12” joists.
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
LED Module
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
Electrical connection;
• Provided with quick connector between LED module and housing for easy plug and play installation.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
max. 23 fixtures per a dimmer switch 300W loaded.
Warranty
• 50,000hr of lamp life.
Listing -ETL Listed.
-State of california Title 24
-Energy star Approved & Listed
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
SPECIFICATION
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
Lu me n (+/-5%)
10 W
560 lm
12 W
650 lm
Efficacy (LPW)
56 lm/W
54 lm/W
Color (+/-5%)
C R I (Typical)
Beam Angle
Dimming
2700K, 3000K, 4000K
80
90˚
Lamp Life
Environment
50,000 hr
Damp & Wet Location
Triac
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
• Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
Consult tech. service or factory for additional dimmers
Driver on Board
LED downlighting
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
LEDH-RT4ICAR
SPECIFICATION
Housing
• Single wall aluminum housing gasketed for IC/Air-Tight in insulated ceiling.
• 5-1/2” height allows use in 2”x 6” joist costruction.
LED Module&Trim
• Two-piece interchangable trim to reflector or baffle.
• Module construction includes LED, heat sink, lens, baffle trim.
• white paint finish standard. Available in black baffle with white flange.
Junction Box
• Listed for through branch circuit wiring.(Max.8 No 12 AWG 90˚C branch circuit conductors.)
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
• Provided listed quick connectors for easy snap-in wires. (Optional)
Remodel Clips
• 3 remodel clips secure housing and accommodates 1/2” and 5/8” ceiling materials.
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
LED Engine
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
Electrical connection;
• Provided with quick connector between LED module and housing for easy plug and play installation.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
max. 23 fixtures per a dimmer switch 300W loaded.
Warranty
• 50,000hr of lamp life.
Listing -ETL Listed.
-State of california Title 24
-Energy star Approved & Listed
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
Lu me n (+/-5%)
10 W
560 lm
12 W
650 lm
Efficacy (LPW)
56 lm/W
54 lm/W
Color (+/-5%)
C R I (Typical)
Beam Angle
Dimming
Lamp Life
2700K, 3000K, 4000K
80
90˚
Environment
Damp & Wet Location
Triac
50,000 hr
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Diva®
• Skylark® SELV Series*
DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
Consult tech. service or factory for additional dimmers
Driver on Board
LED downlighting
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
TRIMS & PHOTOMETRIC REPORT
For LEDH-RT4ICA(R)
4” LED
TRIMS
painted
LEDT-C44-WH
Baffle
LEDT-C42-WH
PHOTOMETRIC REPORT * Contact Factory for IES File
[LEDH-RT4ICA(R)]
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
Electrical connection;
• Provided
Providedwith
with
quick
connector
between
LED module
and housing
play installation.
quick
connector
between
LED module
and housing
for easyfor
plugeasy
andplug
play and
installation.
• Also available
GU24
base
connector
for
compact
fluorescent
housing.
(Optional)
available GU24 base connector for compact fluorescent housing. (Optional)
120V
LED
Supply
on-bed
with
IC chip.
chip.
•1
2D
0VELE
owG
er I
Su
edA
w
ithIccustomized
usN
tomized IC
O
R
RDtriac
IPPower
N
NppFlyOon
R-bmost
M
T
O
•H110-100%
didimmable
mWmatatbslefor
fr Tel eleading
amdpn
i .g and
edgeincandescent
incandescent&& low
lowvoltage
formo
andtrailing
trailing edge
o0-u1s0in0g%triac
Cstolooof
Driver
Trim
Reflector finish
dimmer switches.
inrushcurrent
currenthurting
hurtingswitch
switchand
andmodule.
module.
• Patented (Pendi
ng in USA)
USA) driving
driv ing circuit
circuit to
to prevent
prev entinrush
(Pending
• Recommended for use
run of
of a dimmer switch 600W
and
use max. 45 fixtures
fixtures per
per run
600W loaded
loaded and
max. 23
loaded.
23 fixtures
fixtures per a dimmer
dimmer switch
switch 300W
300W loaded.
LaErDrHa-nRTt4yICAR
-12 : 12W
Warranty
W
• 50,000hr
50,000hr of
of lamp
lamp life.
-30 : 3000K
-40 : 4000K
Listing
-ETL Listed.
Listing -ETL
-State
24
-State of california Title 24
Example -Energy
: L E DH -RTstar
4 ICA -Approved
1 0-3 0- D O B& Listed
-E ne r gy star Appr ove d & Listed
(dimmable with any Line
or Low Voltage Dimmer)
LEDT-C42
-P R : pewter
-CP : champane
-WH: white painted
Baffle & Metal Ring finish
-BK : black
-CA: cappuccino
-SN: satin nickel
-CH: chrome
-AN: antique nickel -UN: natural steel
-AC: antique copper - PB: polished brass
Example : LEDT-C42-WH-WH
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
LED-AFC4
120V 4“ LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter
Project
Date
Prepared by
4” LED
3-1/8”
(80mm)
DESCRIPTION
The 4” Retrofit LED module&trim kit with E26 medium screw base for the 4” IC/Airtight and Non-IC incandescent recessed downlight and
GU24 adapter for CFL housing. It’s designed for use with Lumtech# IH-410, IH-410ICA and the remodeled including other compatible
most 4” housings classified by ETL. High efficacy LED with integral dimmable driver and the optical diffusion produces high lumen transmission and even illumination. Suitable for wet location.
DESIGN FEATURES
LED Module&Trim
• Durable aluminum extrusion heat sink with intergrated with COB(chip on board).
• Module construction includes LED, heat sink, lens, baffle trim.
• Available with baffle trims in white or black painted and clear or white reflectors.
SPECIFICATION
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
Housing compatibility
• See Housing Compatibility section
Electrical connection;
• E26 medium screw-base Edison connector provides easy retrofit of incandescent housing.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
max. 23 fixtures per a dimmer switch 300W loaded.
• Heat sink designed by computer simulation and aluminum board for low heat operation.
W•LaurmraenntMyaintenance: L70/50, 70% lumens/50,000 hours
•Electrical
El5e0c,t0r0ic0ahlrconnection;
coofnlanmepctliofen.;
•
Provided
with
quick
connector
between
LED module
and housing
play installation.
• Provided-with
connector
between
LED module
and housing
for easyfor
plugeasy
andplug
play and
installation.
Listing
ETLquick
Listed.
•
Also
available
GU24
base
connector
for
compact
fluorescent
housing.
(Optional)
• Also available GU24 base connector for compact fluorescent housing. (Optional)
- State
of california
Title 24with customized IC chip.
Power
Supply
on-bed
• 120V LLED
ith
ED
Power
Supply
on-bed
w customized chip.
- Energy
star
Approved
& Listed
leading and
edge
incandescent
&&
low
voltage
• 10-100%
10-100 triac dimmable for most of leading
andtrailing
trailing
edge
incandescent
low
voltage
% triac dimmable for most of
dimmer switches.
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Patented (Pending in USA) driving circuit to prevent inrush
c hurting switch and module.
urrent
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
max. 23 fixtures per a dimmer switch 300W loaded.
max. 23 fixtures per a dimmer switch 300W loaded.
Warranty
Warranty
• 50,000hr of lamp life.
• 50,000hr of lamp life.
Listing -ETL Listed.
Listing -ETL Listed.
-State of california Title 24
-State of california Title 24
-Energy star Approved & Listed
-Energy star Approved & Listed
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
Lu me n (+/-5%)
10 W
560 lm
12 W
650 lm
Efficacy (LPW)
56 lm/W
54 lm/W
Color (+/-5%)
C R I (Typical)
Beam Angle
Dimming
2700K, 3000K, 4000K
80
90˚
Lamp Life
Environment
50,000 hr
Damp & Wet Location
Triac
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
•
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
PHOTOMETRIC REPORT
4“ LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter
4” LED
HOUSING COMPATIBILITY
LED-AFC4 ETL Listed for installation in the following Lumtech E26 screw based 4” standard and shallow recessed housings;
• 4” : IH-410, IH-410R, IH-410ICA, FEH-V4ICA-GU24, FEH-V4ICAR-GU24 (GU24 base adapter only)
LED-AFC4 ETL Classifed for retrofit in the following 4” recessed housing;
• Halo : H99T, H99RT, H99ICT
• All-Pro : ET400, ET400R, ET400AT
• Juno : TC1, TC1R, IC1P
• Capril : R4, RR4, R4ASIC
• Lithonia : L3, L3R
• Thomas : PS4, PS4RM, PS4ASIC
TRIMS
LEDT-C44
Retrofit trim, Changeable with
haze clear reflector (-HC)
pewter reflector (-PR)
champagne reflector (-CP)
white painted reflector (-WH)
TML-C44-HC
O.D : 4-15/16" (126mm)
TML-C44-WH
Baffle
TML-C42-WH
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
Electrical connection;
• Provided
Providedwith
with
quick
connector
between
LED module
and housing
play installation.
quick
connector
between
LED module
and housing
for easyfor
plugeasy
andplug
play and
installation.
• Also available
fluorescent
available GU24
GU24base
baseconnector
connectorforforcompact
compact
fluorescenthousing.
housing.(Optional)
(Optional)
• 120V LED
Supply on-bed
on-bed with
withcustomized
customizedICICchip.
chip.
LED Power
Power Supply
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
10 0% t ria c dim m ab le o
switches.
ORe•1dimmer
Rtr0-D
E
R
ING I NFOfRrmMosAtoTfIelOadNingand trailing edge incandescent & low voltage
o
fi
t
• Patented
Pa t ented(P
(Pending
prevent
current hurting switch
endWinagtin
driCvionlgocrcircuit
irTceumit pto
to.pre
ventDirinrush
nirvuesrh current
switch and
andTrmodule.
mimodule.
Reflector finish
tinsUSA) driving
• Recommen
Recommended
for use
use max.
45 fixtures
fixtures per
dimmer switch
switch 600W
ded for
m ax. 45
per run
run of
of a dimmer
600W loaded
loadedand
and
max. 23 fix
tures per
per a dim
mer switch
switch 300W
300W loaded.
loaded.
fixtures
dimmer
Warranty
Warranty
- 1 2 : 12W
D -A F C 4
lam p life.
l if e.
•LE550,000hr
0, 0 0 0 hr ooff lamp
-30 : 3000K
-40 : 4000K
Listed.
Listing
Listing -ETL Listed.
california Title
Title 24
24
-State of
-State
of california
Example :-LE
EnDe-rAgFyC4st
-a1r0-AApproved
2p7-pDrOoBved&
-Energy
star
&Listed
Listed
(dimmable with any Line
or Low Voltage Dimmer)
LEDT-C42
-P R : pewter
-CP : champane
-WH: white painted
Baffle
-BK : black
Example : LEDT-C42-HC-WH
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
LED-AFR4
120V 4“ LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter
Project
Date
Prepared by
4” LED
2-1/8”
(54.5mm)
DESCRIPTION
The 4” Retrofit LED module&trim kit with E26 medium screw base for the 4” IC/Airtight and Non-IC incandescent recessed downlight and
GU24 adapter for CFL housing. It’s designed for use with Lumtech# IH-410, IH-410ICA and the remodeled including other compatible
most 4” housings classified by ETL. High efficacy LED with integral dimmable driver and the optical diffusion produces high lumen transmission and even illumination. Suitable for wet location.
DESIGN FEATURES
LED Module&Trim
• Durable die-casting aluminum heat sink with intergrated trim in one-piece.
• Module construction includes LED, heat sink, lens, baffle trim.
• white paint finish standard. Available in black baffle with white flange.
SPECIFICATION
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
Housing compatibility
• See Housing Compatibility section
Electrical connection;
• E26 medium screw-base Edison connector provides easy retrofit of incandescent housing.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23
• fHixetautressinpkedreasidginmemdebryscwom
i tcphu3te0r0Wsimluolaadtei odn.and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
WEleacrtrraincatyl connection;
Electrical
•••PProvided
5r0o,v0id0e0dhwriowith
mickpcolinconnector
fnee.ctor between
thfqal uquick
betweenLED
LEDmodule
moduleand
andhousing
housingfor
foreasy
easyplug
plugand
andplay
playinstallation.
installation.
•
Also
available
GU24
fluorescent
• Also available
GU24base
baseconnector
connectorforforcompact
compact
fluorescenthousing.
housing.(Optional)
(Optional)
Listing
- ETL Listed.
•
120V LED
Power
Supply on-bed
on-bed
withcustomized
customizedICICchip.
chip.
• 120V
LED
- State
Power
of california
Supply
Title 24 with
• 10-100% triac dimmable for mostf oleading and trailing edge incandescent & low voltage
• 10-100%
for
of leading and trailing edge incandescent & low voltage
- Energy star Approved & Listed
dimme
dimmerr switches.
switches.
• Patented
Patented(Pending
(PendingininUSA)
USA)driving
driving
circuit
to prevent
inrush
c hurting
urrent
hurtingswitch
switchand
andmodule.
module.
circuit
to prevent
inrush
current
• Recommended for use max. 45
45 fixtures
per run
run of
of aa dimmer
dimmer switch
switch600W
600W loaded
loaded and
and
fixtures per
max. 23
23 fixtures
fixtures per a dimmer
dimmer switch
switch 300W
300W loaded.
loaded.
Warranty
Warranty
• 50,000hr
50,000hr of
of lamp
lamp life.
life.
Listing
-ETL Listed.
Listing -ETL
-State
24
-State of california Title 24
-Energy star Approved & Listed
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
C R I (Typical)
10 W
80 CRI
90 CRI
Lu me n (+/-5%)
Efficacy (LPW)
600 lm
60 lm/W
480 lm
48 lm/W
Color (+/-5%)
Beam Angle
Dimming
Lamp Life
Environment
2700K, 3000K, 4000K
100˚
Triac
50,000 hr
Damp & Wet Location
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
•
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
PHOTOMETRIC REPORT
4“ LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter
4” LED
HOUSING COMPATIBILITY
AFR4 ETL Listed for installation in the following Lumtech E26 screw based 4” standard and shallow recessed housings;
• 4” : IH-410, IH-410R, IH-410ICA, FEH-V4ICA-GU24, FEH-V4ICAR-GU24 (GU24 base adapter only)
AFR4 ETL Classifed for retrofit in the following 4” recessed housing;
• Halo : H99T, H99RT, H99ICT
• All-Pro : ET400, ET400R, ET400AT
• Juno : TC1, TC1R, IC1P
• Capril : R4, RR4, R4ASIC
• Lithonia : L3, L3R
• Thomas : PS4, PS4RM, PS4ASIC
PHOTOMETRIC REPORT * Contact Factory for IES File
Distribution
2.0ft
4.0ft
6.0ft
8.0ft
[LED-AFR4]
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
Electrical connection;
• Provided
Providedwith
with
quick
connector
between
LED module
and housing
play installation.
quick
connector
between
LED module
and housing
for easyfor
plugeasy
andplug
play and
installation.
• Also available
GU24
base
connector
for
compact
fluorescent
housing.
(Optional)
available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED
Supply on-bed
on-bed with
withcustomized
customizedICICchip.
chip.
LED Power
Power Supply
• 10
-100% ttriac
riac dim
mable fo
ost of lleading
eading and trailing edge incandescent & low voltage
10-100%
dimmable
forr m
most
OR
DERING INFORMATION
dimmer switches.
Retrofit
inTU
eSmApdriving
).drivingDcrcircuit
iirvceurit to
inrush curre
nthurting
hTurritminfswitch
ginswisihtchand
andmodule.
module.
• Patented (Pending
(P enCdoinlgorin
USA)
to prevent
prevent inrush
current
• Recommen
ded for
dimm er switch
switch600W
600Wloaded
loaded and
and
Recommended
for use
use max. 45 fixtures
fixtures per run of
of aa dimmer
max. 23 fix
tures per
per a dimm
er switch
switch 300W
300W loaded.
loaded.
fixtures
dimmer
Warranty
Warranty
LED-AFR4
l-a2m7:p2llife.
• 50,000hr of lamp
7if0e0.K
-BLANK : Standard White
-DOB: 120V Driver on Board
(dimmable with any Line
-is3t0e:d3. 000K
Listing
-ET L LListed.
Listing -ETL
-40 : 4000K
or Low Voltage Dimmer)
-St
ate
of
california
T
itle 24
24
-State of california Title
Example : L-Energy
-EEDn-eArFgRy4star
s-t2a7r-D
AOpBproved && Listed
Approved
Listed
(consult factory for custom finish)
Example : BLANK
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
LEDH-NCR5ICA-DOB
5” Line Voltage LED Recessed Housing with Baffle Trim
Non-IC type New Construction or Remodel Application
Project
Date
Prepared by
5” LED
DESCRIPTION
Ceiling Cut-out : 5-1/2”
5” aperture promotional LED housing with 120V, 12.8W AC LED Module, integral triac dimmable by most of leading and trailing edge dimmer
switches in the market. The LEDH-NCR5ICA-DOB is designed for use in new construction or remodel applications with insulated ceilings.
Thermally protected, Suitable for wet location.
DESIGN FEATURES
LED Module&Trim
• Durable die-casting aluminum heat sink with intergrated trim in one-piece.
• Module construction includes LED, heat sink, lens, baffle trim.
• White paint finish standard. Available in black baffle with white flange.
SPECIFICATION
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
• Sealed for wet location to use in shower room.
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
Lu me n (+/-5%)
12.8 W
910 lm
Efficacy (LPW)
Color (+/-5%)
70 lm/W
2700K, 3000K, 4000K
80
CR I
Mounting
• Provided plaster frame (7-1/8” x 7-1/8“) for new construction.
• (2)mounting chips on trim module for use of remodeling version.
• HB-6 bar hangers are option to use of new contruction.
96.3˚
Triac
Lamp Life
Environment
50,000 hr
Damp & Wet Location
Electrical connection;
• J-box: - Installed on the top of fixture with (5)1/2” knockout.
- Listed for through branch circuit wiring.(max. 4 No. 12 AWG 90˚C Conductions.)
- Ground wire provided.
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge Triac dimmer switches in the market.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
max. 23 fixtures per a dimmer switch 300W loaded.
Electrical connection;
Packing
• Provided
Providedwith
with
quick
connector
between
LED module
and housing
play installation.
quick
connector
between
LED module
and housing
for easyfor
plugeasy
andplug
play and
installation.
•• 1A2lsiondaivviadiulaabl lceolGorUb2o4x ibnamseascteornncaercttoonr. for c ompact fluorescent hous ing. (Optional)
• Also available GU24 base connector for compact fluorescent housing. (Optional)
•
120V LED
omized IC
IC chip.
chip.
• 120V
LEDPower
PowerSupply
Supplyon-bed
on-bedwith
with cust
customized
W
a0r-r1a0n0t%triac
ytriac dimmable
low voltage
voltage
and trailing
trailing edge
edge incandescent
incande scent && low
••110-100%
dimmablefor
for most
most of
of leadin
leadingg and
• 5dimmer
d0m
i ,0m0e0rhswitches.
srwoiftcalhmesp. life.
• Patented
Patented (Pending
(Pendingin
in USA)
USA) driving circuit to prevent
p revent inrush
inrush current
current hurting
hurtin gswitch
switchand
andmodule.
module.
•LisRecommended
Rteicnogmm-EeTnLdLeidstefor
fodr.use
usemax.
max.45
45fixtures
fixtures per
per run
run of
of aa dimmer
dimmer switch
switch 600W loaded
loaded and
and
max. 23
23-Sfitfixtures
xattuereosfpper
sw24itch 300W loaded.
loaded.
cearlifaaorddimmer
nimiamTeitrleswitch
Warranty-Energy star Approved & Listed
Warranty
•
50,000hr of
• 50,000hr
of lamp
lamp life.
life.
Accessories
L
i
s
t
i
n
g
-E
T
L
L
i
st
e
d
Listing
-ETL
Listed.
• H an g erb a rs f or u s e.withhousing plate in
cpaplifliocarntiioaTitle
new con-sS-State
trtuactetiooofnf acalifornia
nTsitle 24
-Energy star Approved & Listed
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
(Typical)
Beam Angle
Dimming
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
Diva®
•
Consult tech. service or factory for additional dimmers
Driver on Board
LED downlighting
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
LED-AFR56
120V 5”& 6“LEDRecessedRetrofit-KitwithE26andGU24BaseAdapter
Project
Date
Prepared by
5” & 6” LED
2-11/16”
(68mm)
DESCRIPTION
The 6” Retrofit LED module & trim kit with E26 medium screw base for the 5” and 6” IC/Airtight and Non-IC incandescent recessed downlight
and GU24 adapter for CFL housing. It’s designed for use with Lumtech# IH-520ICA, IH-620ICA, IH-520, IH-620, shallow IH-640ICA,IH640 and the remodeled including other compatible most 5” and 6” housings in the market, classified by ETL. High efficacy 120V DOB
(Driver On Board) Module (Campcell ® ) LED with integral triac dimmable, and the optical diffusion produces high lumen transmission and
even illumination. Suitable for wet location.
DESIGN FEATURES
LED Module&Trim
• Durable die-casting aluminum heat sink with intergrated trim in one-piece.
• Module construction includes LED, heat sink, lens, baffle trim.
• white paint finish standard. Available in black baffle with white flange.
SPECIFICATION
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
Mounting
• Precise formed steel torsion spring bracket adjustable for position to fit 5”& 6” housings.
• Torsion spring fit compatible housing with torsion spring mounting tabs.
Listing
-ETL Listed.
Listing -ETL
Listed.
-State
of california
california Title
24
-State of
Title 24
-Energy
Approved &
& Listed
-Energy star
star Approved
Listed
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
1EA (COB)
120V~277V AC
Wattage (+/-5%)
Lu me n (+/-5%)
12.8 W
910 lm
Efficacy (LPW)
Color (+/-5%)
70 lm/W
2700K, 3000K, 4000K
C R I (Typical)
Beam Angle
Dimming
80
96.3˚
Triac
50,000 hr
Damp & Wet Location
Lamp Life
Environment
Housing compatibility
• See Housing Compatibility section
Electrical connection;
• E26 medium screw-base Edison connector provides easy retrofit of incandescent housing.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
••1H2e0aVt sLiEnDk dPeoswigenreSdubpypclyomonp-ubteerdswimituhlactuiosntoamndizeadlumICincuhmip.board for low heat operation.
•• 1Lu0m-1e0n0%Mtarinatcedniamnmcea:bLl7e0f/o5r0m, o7s0t%oflulemadeinnsg/5a0n,d00tr0aihlionugresdge incandescent & low voltage
E
ldeicmtmricearlswconnection;
cotinchneesc.tion;
Electrical
•• PPraotveindeteddw(tiPheqnudcini kgconi nnUeSctAo)r dbreitvwni eegncLriEcDum
i t otoduplereavnednhtoinursuinsghfocruerraesyntplhuugratinndgpslwayitinchstaalnladtiomn.odule.
• Provided with quick connector between LED module
and housing for easy plug and play installation.
•• RAeslcoomavmaieal nbdel edGfoUr2u4sebamsaexc. o4n5nfeixcttuorrefsorpecor mrupnacotf faludoirmesmceenrtshwotiucshn
i 6g0.0(W
Opltoo
i adneadl) and
• Also available GU24 base connector for compact fluorescent housing.
(Optional)
•
m
a
x
.
2
3
f
i
x
t
u
r
e
s
p
e
r
a
d
i
m
m
e
r
s
w
i
t
c
h
3
0
0
W
l
o
a
d
e
d
.
chip.
12 0 V LLED
ED PPower
ow er SSupply
up p ly oon-bed
n -bed wwith
ti h ccustomized
u s tom i ze d IC
IC chip.
• 120V
•
10-100% triac
edgeincandescent
incandescent&&low
lowvoltage
voltage
• 10-100%
triac dimmable
dimmable for
for most
most of
of leading
leading and
and trailing
trailing edge
Wddimmer
airmrmanswitches.
ertyswitches.
•••5Pa0t,
r(Poefnldaimngp
lifUeS.A)driving
e0n0t0edh(Pending
urrenthurting
hurtingswitch
switchand
andmodule.
module.
Patented
ininUSA)
drivingcircuit
circuitto
toprevent
prevent inrush
inrush ccurrent
•
Recommended for
mmer switch
switch 600W
600W loaded
loaded and
and
• Recommended
for use
use max.
max. 45
45fixtures
fixturesper
perrun
runofofa adidimmer
Lism
tainx.g23
de.r aa dimmer
23-EfTfixtures
ixLtuLrisetsepper
max.
dimmer switch 300W loaded.
loaded.
Warrant-yState of california Title 24
Warranty
•
stparlifAlife.
• 50,000hr
oflaym
lamp
50,000h-Ernoefrg
ep.proved & Listed
LED Quantity
Input Voltage
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
•
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
PHOTOMETRIC REPORT
5” & 6“ LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter
5” & 6” LED
HOUSING COMPATIBILITY
LED-AFR56 ETL Listed for installation in the following Lumtech E26 screw based 5” and 6” standard and shallow
recessed housings;
• 6” : IH-620ICA, IH-620ICAR, IH-610, IH-610R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R
• 5” : IH-520ICA, IH-520ICAR, IH-520, IH-520R
LED-AFR56 ETL Classifed for retrofit in the following 5” and 6” recessed housing;
• Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT,H7TNB, H7TCP, H7UICT,H7UICAT, H27ICAT,
H27RICAT, H27ICT,H27RICT,H27T,H27RT, H5ICAT,H5RICAT, H5T,H5RT,H25ICAT
• All-Pro : 500AT, EI500RAT, ET500, ET500R, EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700,
ET700R, EI700U, EI700UAT, E2700AT, EI2700, EI2700R, ET2700, ET2700R
• Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, IC25, IC25R, IC25W, IC25S, TC20, TC20R
• Capril : CR1, pr1, QL1. R9ASIC
• Lithonia : L7X, L7XP
• Thomas : PS1, R9ASIC/PS9RM
• Prescolite : IBXS
PHOTOMETRIC REPORT * Contact Factory for IES File
2.0ft
4.0ft
90˚
6.0ft
80˚
70˚
8.0ft
60˚
50˚
10˚ 20˚
30˚
96.3˚
40˚
[LED-AFR56]
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
Electrical connection;
• Provided
Providedwith
with
quick
connector
between
LED module
and housing
play installation.
quick
connector
between
LED module
and housing
for easyfor
plugeasy
andplug
play and
installation.
• Also available
GU24
base
connector
for
compact
fluorescent
housing.
(Optional)
available GU24 base connector for compact fluorescent housing. (Optional)
•
120V LED
Supply on-bed
on-bed with
withcustomized
customizedICICchip.
chip.
• 120V
LED Power
Power Supply
• 1010E
0%
ac G
dim
rm
adN
ing and trailing edge incandescent & low voltage
10-100%
dimmable
for
most
off Ile
leading
O
R
D
Rttriac
IriN
ImNabFleOfo
R
MosAt oT
O
dimmer switches.
em
oautseinntg
dinCgoin
ilnorUSA)
UT
SA
) driving
dpr.ivin g circuit
•
ed (Pen
ciD
rcruiviteto
tro prevent
prevent inrush
inrush current
curre nthurting
hTurritm
ingFswitch
sinwiisthch and
and module.
module.
•HPPatented
(Pending
• Recommend
ed for use max. 45
4 5 fixtures per run of a dimmer
dimm er switch
switch 600W
600W loaded
loaded and
and
Recommended
max. 23 fixtu
res per a dimmer switch 300W loaded.
fixtures
LEaDr-A
FRn5t6y
-DOB: 120V Driver on Board
-BLANK : Standard White
-27 : 2700K
W
ra
Warranty
(dimmable with any
(consult factory for custom finish)
-30 : 3000K
•
50,000hr
of
lam-4p0llife.
• 50,000hr of lamp
Line or Low Voltage
:if4e0. 00K
Listing
isted.
Listing -ETL
-ETL LListed.
-Stat
-Statee of california Title 24
-Energy
Approved &
& Listed
-Energy star
star Approved
Listed
Example : LED-AFR56-30-DOB
Dimmer)
Example : BLANK
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
Project
LEDH-RT56ICA
6” LED IC/AIR-TIGHT Recessed down light for new
Date
Prepared by
construction
6” LED
7-1/2"
(190mm)
10-3/8"
(263.5mm)
7-5/8"
(193.6mm)
DESCRIPTION
LEDH-RT56ICA housing designed for use with a separate LED engine kit that is
intergraled with heat sink and trims and compatible 6” LED trims. The This
fixture offer easy and fast installation using a disconnect device and
held securely in the housing with two pressure springs.
DESIGN FEATURES
7-1/4"
(184mm)
Housing
• Single wall aluminum housing gasketed for IC/Air-Tight in insulated ceiling.
• Housing can be adjustable for ceiling thickness up to 1-1/4”
LED Module&Trim
• Durable die-casting aluminum heat sink with intergrated trim in one-piece. (LED-AFR56)
• Module construction includes LED, heat sink, lens, baffle trim.
• white paint finish standard. Available in black baffle with white flange.
SPECIFICATION
Junction Box
• Listed for through branch circuit wiring.(Max.8 No 12 AWG 90˚C branch circuit conductors.)
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
• Provided listed quick connectors for easy snap-in wires. (Optional)
Bar Hangers
• 24” Bar Hangers provide stability and support on joists and T-Bar Grid ceilings.
• Housing can be positioned at any point within 24” joist span.
• Score lines allow “tooless” shortening for 12” joists.
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
LED Engine
• Heat sink designed by computer simulation and aluminum board for low heat operation.
••LHuematensinMkadienstiegnnaendcbey: Lc7om0/p5u0t,e7r0si%mululamtieonnsa/5nd0,0al0u0mihnouumrsboard for low heat operation.
E•leLucmtreicnaMl aciontnenneacntcieo:nL;70/50, 70% lumens/50,000 hours
•Electrical
monscnreecwt-iboans;eEdison connector provides easy retrofit of incandescent housing.
ElEe2c6trmiceadliucconnection;
••• Provided
vdawliatquick
Uc2o4nnbeacstoerbetween
cboetnwneeecnLED
tLoErDfomodule
paandcthousing
er easy
neatshplug
sginagnplay
.d(pOlainstallation.
pytinosntaal)ation.
PArlosvodi aewith
hbqel uiGckconnector
mrocdoumeland
hfoul usoirnegsfcofor
yopuluand
•• 1A2sl0oVaLvEaDilaPboel weGrUS2u4ppblyasoenc-obnendewctiothr fcoursctoommipzaecdt IfClucohreipsc.ent housing. (Optional)
• Also available GU24 base connector for compact fluorescent housing. (Optional)
•••1120V
%EDtrP
i aPower
i r SSupply
muapbpel yfooon-bed
oifthlecacustomized
aCilnch
giepd.ge incandescent & low voltage
102-01V00LLED
ocwdem
nr-mbeodstw
udsintogmanizdedtrIIC
with
chip.
d1i0m-1m0e0r%swtriaitcchdesim.mable for most of leading and trailing edge incandescent & low voltage
•
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
• Pdimmer
ds(wPei tcnhden
i s.gin USA) drivingcircuittopreventinrushcurrenthurtingswitch and module.
dam
i temneterswitches.
••RPaetceonmtemde(PnedneddinfgorinuUsSeAm)darxiv.in4g5cfiirxctuuitretosppreervernutninorufsahdcuimrremnetrhuswrtiintcghsw60
deoddualen.d
i tc0hWand
anlodam
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch
module.
m
a
x
.
2
3
f
x
i
t
u
r
e
s
p
e
r
a
d
m
i
m
e
r
s
wi
t
c
h
3
0
0
W
l
o
a
d
e
d
.
•
Recom mend e dffor
o ruuse
se m
ax .445
5 fixfixtures
t ur e s pper
er rrun
u n ooffaadimmer
and
• Recommended
max.
dimmerswitch
switch600W
600Wloaded
loaded
and
300W loaded.
loaded.
Wm
ararxa.n23tyfixtures
max.
23 fixtures per
per aa dimmer
dimmer switch
switch 300W
•5a0r,r0a0n0thyrof lamp life.
W
Warranty
••Li50,000hr
5s0ti,n00g0h-Erof
ToLflamp
Lliasmteplife.
d.life.
Listing -ETL
--ESTtLatLei
sotefdc.alifornia Title 24
Listing
Listed.
ovTeitdl24
--SEtnaetergoyfsctaarl
ifAoprpnriaTitle
e&2L4isted
-State
of california
-Energy
star
Approved
&
-Energy star Approved & Listed
Listed
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
Height : 7-1/2”
Housing Aperture : 6-1/8“
Ceiling Cut-out : 6-1/2”
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
Lu me n (+/-5%)
12.8 W
910 lm
Efficacy (LPW)
Color (+/-5%)
70 lm/W
2700K, 3000K, 4000K
80
89.7˚
C R I (Typical)
Beam Angle
Dimming
Lamp Life
Environment
Triac (Standard)
50,000 hr
Damp & Wet Location
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Diva®
• Skylark® SELV Series*
DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
Consult tech. service or factory for additional dimmers
Driver on Board
LED downlighting
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
LEDH-RT56ICAR
6” LED IC/AIR-TIGHT Recessed down light for Remodeling
Project
Date
Prepared by
6” LED
6-1/8”
(157mm)
DESCRIPTION
LEDH-RT56ICAR Remodel housing designed for use with a separate LED engine
kit that is intergraled with heat sink and trims and compatible 6” LED trims. The
This fixture offer easy and fast installation using a disconnect device and held
securely in the housing with two pressure springs.
DESIGN FEATURES
3-7/8"
(100mm)
Housing
• Single wall aluminum housing gasketed for IC/Air-Tight in insulated ceiling.
• 7-1/2” height allows se in 2” X 8” joist construction.
SPECIFICATION
LED Module&Trim
• Durable die-casting aluminum heat sink with intergrated trim in one-piece. (LED-AFR56)
• Module construction includes LED, heat sink, lens, baffle trim.
• white paint finish standard. Available in black baffle with white flange.
Junction Box
• Listed for through branch circuit wiring.(Max.8 No 12 AWG 90˚C branch circuit conductors.)
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.
• Provided listed quick connectors for easy snap-in wires. (Optional)
LED Engine
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
• H eat s ink d es ig n e d b y computersimulation and aluminum board for low heat operation.
E
c t ricaMaintenance:
l c o n n e c ti o
n;
• leLumen
L70/50,
70% lumens/50,000 hours
• E26 medium screw-base Edison connector provides easy retrofit of incandescent housing.
ElAelcstoriacvaalilcaconnection;
oblnenGeUc2ti4onba;se connector for compact fluorescent housing. (Optional)
•Electrical
ounpnpelcytoornb-ebbetween
tweedenwLitEhLED
Dcmuosmodule
dtoulme iazneddhI
easy
plug
••• PProvided
1r2o0viVdeLdEwwith
DtiPhoqquick
wuieckr cSconnector
hnigpf.or for
andoCusci
housing
easy
plugand
andplay
playinstallation.
installation.
••• Also
1A0ls-o1available
0a0v%aitlaribalcedG
i
m
m
a
b
l
e
f
o
r
m
o
s
t
o
f
l
e
a
d
i
n
g
a
n
d
t
r
a
i
l
i
n
g
e
d
g
e
i
n
c
a
n
d
e
sg
c
e
n
t
U
2
4
b
a
s
e
c
o
n
n
e
c
t
o
r
f
o
r
c
o
m
p
a
c
t
f
u
o
r
e
s
c
e
n
t
h
o
u
s
i
n
.
(
O
p&tiloonwalv) oltage
GU24 base connector for compact fluorescent housing. (Optional)
tocwhee
sr.Supplyon-bed
• d1i
2m0mVe
LrEsDwPi
120V
LED
Power
Supply
on-bedwith
withcustomized
customizedICICchip.
chip.
••• 10-100%
P1a0t-e1n0t0e%d triac
(tPreiancddimmable
dinimg imn Uabfor
SlAe) most
fdorrivminof
ogsctiroleading
cfuitletaodpinrand
gevaenn
dttirnariluinsgh
ecdugrerincandescent
einntcahnudrteinsgcesnwti&
t&chlow
loawndvoltage
vmolotadguele.
trailing
edge
• Rdimmer
deimcommemrswitches.
sewnidtcehdesfo.r use max. 45 fixtures per run of a dimmer switch 600W loaded and
iPxteunrdeinsgpeiinnrU
aSdAm
i )ddriving
mrievirnsgwci
•m
Paatexn.t2e3df((Pending
itrcchui3t0to0Wprel
voeandinrush
teindr.ushcurrent
hurtingswitch
switchand
andmodule.
module.
Patented
USA)
circuit
to prevent
current hurting
•
Recommended for
use max.
max. 45
45 fixtures
per run
run of
ofaa dimmer
dimmerswitch
switch600W
600Wloaded
loaded and
and
•
Recommended
for
use
fixtures
per
Warranty
max. 23
fixtures
per
a
dimmer
switch
300W
loaded.
23 fixtures
dimmer switch 300W loaded.
• 50,000hr of lamp life.
Warranty
Warranty
•Li550,000hr
liastmedplife.
st0i,n0g00h-Erof
ToLfLlamp
.life.
tLeisotefdca.lifornia Title 24
Listing
--ESTtaLListed.
Listing -ETL
--State
vTeidtle&
-EStnaetregy
caarliAfoprpnrioaTitle
2L4isted
ofofstcalifornia
24
-Energy star Approved & Listed
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
Lu me n (+/-5%)
13.6 W
898 lm
Efficacy (LPW)
Color (+/-5%)
66 lm/W
2700K, 3000K, 4000K
80
89.7˚
C R I (Typical)
Beam Angle
Dimming
Lamp Life
Environment
Remodel Clips
• 4 remodel clips secure housing and accommodates 1/2” and 5”/8” ceiling materials.
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
Height : 7-1/2”
Ceiling Cut-out : 6-1/2”
7-1/4"
(184mm)
Triac (Standard)
50,000 hr
Damp & Wet Location
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
• Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
Consult tech. service or factory for additional dimmers
Driver on Board
LED downlighting
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
TRIM & PHOTOMETRIC REPORT
For LEDH-RT56ICA(R)
6” LED
• Heat sink designed by computer simulation and aluminum board for low heat operation.
• Lumen Maintenance: L70/50, 70% lumens/50,000 hours
Electrical connection;
• Provided
Providedwith
with
quick
connector
between
LED module
and housing
play installation.
quick
connector
between
LED module
and housing
for easyfor
plugeasy
andplug
play and
installation.
• Also available
GU24
base
connector
for
compact
fluorescent
housing.
(Optional)
available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED
Supply on-bed
on-bed with
withcustomized
customizedICICchip.
chip.
LED Power
Power Supply
tIriaNcG
dimImNabFelO
foRrm
andtrailing
trailingedge
edge
incandescent&&low
lowvoltage
••110-100%
dimmable
for
most
incandescent
O
R0-D10E0%Rtriac
MosAtoofTfIelleading
OadNingand
voltage
dimmer dimmer
switches.switches.
CSoAlo) rdriving
. ircu it to
oautesinntg
Tritim
h odule.
U
dTrievim
ngpccircuit
tDorprevent
pivreevrent inrush current hurting
hurti ngswitch
•HPPatented
ed (Pending in USA)
sw
chand
aFnindismodule.
m
• Recommended ffor
or use max. 45 fixtures
fixt ures per run of a dimmer switch
switc h 600W
600W loaded
loaded and
and
max. 23 fixtures per a dimmer switch
switc h 300W loaded.
-27 : 2700K
LEaDrHr-aRn
T5
6ICA
W
ty
Warranty
LEDH-RT56ICAR
-30 : 3000K
p life.
li f-e4.0 : 4000K
lamp
• 50,000hr of lam
Listing -ETL Liste
d.
Listed.
-State of california Title 24
-Energy
Approved &
& Listed
-Energy star
star Approved
Listed
Example : LEDH-RT56ICA-27-DOB
-DOB: 120V Driver on Board
(dimmable with any
Line or Low Voltage
Dimmer)
-BLANK : Standard White
(consult factory for custom finish)
Example : BLANK
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
LED-AFC6
120V 6“ LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter
Project
Date
Prepared by
6” LED
4-5/16”
(110.2mm)
DESCRIPTION
The 6” Retrofit LED module&trim kit with E26 medium screw base for the 6” IC/Airtight and Non-IC incandescent recessed downlight and
GU24 adapter for CFL housing. It’s designed for use with Lumtech# IH-620ICA, IH-620, shallow IH-640ICA, IH-640 and the remodeled
including other compatible most 6” housings classified by ETL. High efficacy 120V DOB (Driver On Board) Module (Campcell ® ) LED with
integral triac dimmable, and the optical diffusion produces high lumen transmission and even illumination. Suitable for damp location.
DESIGN FEATURES
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
Lu me n (+/-5%)
12.9 W
712 lm
Trim
• Available with baffle trims in white or black painted and clear or white reflectors.
Efficacy (LPW)
Color (+/-5%)
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
C R I (Typical)
Beam Angle
Dimming
Lamp Life
55.2 lm/W
2700K, 3000K, 4000K
80
61.1˚
LED Module
• Durable aluminum extrusion heat sink intergrated with COB(chip on board).
• Inner reflector provide more light and beam distribution.
Mounting
• Precise formed steel torsion spring bracket adjustable for position to fit 6” housings.
• Torsion spring fit compatible housing with torsion spring mounting tabs.
• Easier trim installation by snap-on fit clip.
Housing compatibility
• See Housing Compatibility section
Electrical connection;
• E26 medium screw-base Edison connector provides easy retrofit of incandescent housing.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
max. 23 fixtures per a dimmer switch 300W loaded.
Warranty
• 50,000hr of lamp life.
Listing -ETL Listed.
-State of california Title 24
-Energy star Approved & Listed
Triac
50,000 hr
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder® GLV Series*
Nova T✩® NT Series
• Ariadni® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron® Homeworks® RPM-4U*
• Lutron® Homeworks® QS HQRD-6ND Series*
• Lutron® Homeworks® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
• Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
Consult tech. service or factory for additional dimmers
Driver on Board
LED downlighting
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE A DIVISION
OF
ALPHA LIGHTING SYSTEMS
TRIM & PHOTOMETRIC REPORT
6“ LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter
6” LED
HOUSING COMPATIBILITY
LED-AFC6 ETL Listed for installation in the following Lumtech E26 screw based 6” standard and shallow recessed housings;
• 6” : IH-620ICA, IH-620ICAR, IH-610, IH-610R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R
LED-AFC6 ETL Classifed for retrofit in the following 6” recessed housing;
• Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT,H7TNB, H7TCP, H7UICT,H7UICAT, H27ICAT,
H27RICAT, H27ICT,H27RICT,H27T,H27RT
• All-Pro : EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT,
EI2700, EI2700R, ET2700, ET2700R
• Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, TC20, TC20R
• Capril : CR1, pr1, QL1. R9ASIC
• Lithonia : L7X, L7XP
• Thomas : PS1, R9ASIC/PS9RM
• Prescolite : IBXS
TTRRIIMMS
Baffle
painted
white plastic ring
LEDT-C64-HC
LEDT-C64-WH
LEDT-C62-WH
O.D : 7-1/16" (192mm)
PHOTOMETRIC REPORT * Contact Factory for IES File
2.0ft
4.0ft
90˚
6.0ft
80˚
70˚
8.0ft
60˚
50˚
10˚ 20˚
30˚
74.9˚
40˚
[LED-AFC6]
ORDERING INFORMATION
Retrofit
LED-AFC6
Color Temp.
-27 : 2700K
-30 : 3000K
-40 : 4000K
Driver
Trim
Reflector finish
Baffle & Metal Ring finish
-DOB: 120V Driver on Board
LEDT-C64
LEDT-C62
-HC : haze clear
-P R : pewter
-CP : champane
-WH: white painted
-WH: white
-BK : black
-SN: satin nickel
-AN: antique nickel
-AC: antique copper
Example : LED-AFC6-27-DOB
(dimmable with any Line
or Low Voltage Dimmer)
-MO: mocha
-CA: cappuccino
-CH: chrome
-UN: natural steel
- PB: polished brass
Example : LEDT-C64-HC-WH
DOWN LIGHTS AND MORE
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
LED-AF6E
120V 6“LEDRecessedRetrofit-KitwithE26andGU24BaseAdapter
Project
Date
Prepared by
6” LED
3-3/16”
(80.6mm)
DESCRIPTION
The 6” eyeball Retrofit LED module&trim kit with E26 medium screw base for the 6” IC/Airtight and Non-IC incandescent recessed downlight
and GU24 adapter for CFL housing. It’s designed for use with Lumtech# IH-620ICA, IH-620, shallow IH-640ICA, IH-640 and the remodeled
including other compatible most 6” housings classified by ETL. High efficacy 120V DOB (Driver On Board) Module (Campcell ® ) LED with
integral triac dimmable, and the optical diffusion produces high lumen transmission and even illumination. Suitable for damp location.
DESIGN FEATURES
LED Module
• Durable aluminum extrusion heat sink incorporating with LED source.
• Adjustable lamp direction in 358˚ rotation and 0~30˚ tilt.
SPECIFICATION
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
Mounting
• Precise formed steel torsion spring bracket.
• Torsion spring fit compatible housing with torsion spring mounting tabs.
Housing compatibility
• See Housing Compatibility section
Electrical connection;
• E26 medium screw-base Edison connector provides easy retrofit of incandescent housing.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and
max. 23 fixtures per a dimmer switch 300W loaded.
Warranty
• 50,000hr of lamp life.
Listing -ETL Listed.
-State of california Title 24
LED Quantity
Input Voltage
1EA (COB)
120V AC
Wattage (+/-5%)
Lu me n (+/-5%)
13.1 W
750.3 lm
Efficacy (LPW)
Color (+/-5%)
57.3 lm/W
2700K, 3000K, 4000K
C R I (Typical)
Beam Angle
Dimming
80
83.3˚
Triac
50,000 hr
Damp & Wet Location
Lamp Life
Environment
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
•
DOWN LIGHTS AND MORE
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
PHOTOMETRIC REPORT
6“ LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter
6” LED
HOUSING COMPATIBILITY
LED-AF6E ETL Listed for installation in the following Lumtech E26 screw based 6” standard and shallow recessed housings;
• 6” : IH-620ICA, IH-620ICAR, IH-610, IH-610R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R
LED-AF6E ETL Classifed for retrofit in the following 6” recessed housing;
• Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT,H7TNB, H7TCP, H7UICT,H7UICAT, H27ICAT,
H27RICAT, H27ICT,H27RICT,H27T,H27RT
• All-Pro : EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT,
EI2700, EI2700R, ET2700, ET2700R
• Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, TC20, TC20R
• Capril : CR1, pr1, QL1. R9ASIC
• Lithonia : L7X, L7XP
• Thomas : PS1, R9ASIC/PS9RM
• Prescolite : IBXS
PHOTOMETRIC REPORT * Contact Factory for IES File
2.0ft
4.0ft
90˚
6.0ft
80˚
70˚
8.0ft
60˚
50˚
10˚ 20˚
30˚
78.9˚
40˚
[LED-AF6E]
ORDERING INFORMATION
Housing
Color Temp.
LED-AF6E
-27 : 2700K
-30 : 3000K
-40 : 4000K
Driver
Trim Finish
Baffle Finish
-DOB: 120V Driver on Board
-BLANK : Standard White
(consult factory for custom finish)
-WH: white
-BK : black
Example : LED-AF6E-30-DOB
(dimmable with
any
Line or Low Voltage
Dimmer)
Example : BLANK-WH
DOWN LIGHTS AND MORE
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
Type
Catalog #
LED-AF6AD
120V 6“LEDRecessedRetrofit-KitwithE26andGU24BaseAdapter
Project
Date
Prepared by
6” LED
3-5/16”
(84.4mm)
DESCRIPTION
The 6” gimbal Retrofit LED module&trim kit with E26 medium screw base for the 6” IC/Airtight and Non-IC incandescent recessed downlight
and GU24 adapter for CFL housing. It’s designed for use with Lumtech# IH-620ICA, IH-620, shallow IH-640ICA, IH-640 and the remodeled
including other compatible most 6” housings classified by ETL. High efficacy 120V DOB (Driver On Board) Module (Campcell ® ) LED with
integral triac dimmable, and the optical diffusion produces high lumen transmission and even illumination. Suitable for damp location.
DESIGN FEATURES
LED Module
• Durable aluminum extrusion heat sink incorporating with LED source.
• Adjustable lamp direction in 358˚ rotation and 0~30˚ tilt.
SPECIFICATION
Lens
• Impact-resistant plastic.
• High lumen transmission and diffusing for even illumination.
Mounting
• Precise formed steel torsion spring bracket.
• Torsion spring fit compatible housing with torsion spring mounting tabs.
Warranty
• 50,000hr of lamp life.
Listing -ETL Listed.
-State of california Title 24
1EA (COB)
120V AC
Wattage (+/-5%)
Lu me n (+/-5%)
12.6 W
785.5 lm
Efficacy (LPW)
Color (+/-5%)
C R I (Typical)
62.3 lm/W
2700K, 3000K, 4000K
80
Beam Angle
Dimming
74˚
Triac
50,000 hr
Damp & Wet Location
Lamp Life
Environment
Housing compatibility
• See Housing Compatibility section
Electrical connection;
• E26 medium screw-base Edison connector provides easy retrofit of incandescent housing.
• Also available GU24 base connector for compact fluorescent housing. (Optional)
• 120V LED Power Supply on-bed with customized IC chip.
• 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage
dimmer switches.
• Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
• Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23
fixtures per a dimmer switch 300W loaded.
LED Quantity
Input Voltage
Trailing Edge Dimmer
- Lutron® Model Numbers :
• Diva® DVLV Series*
Diva® DVCL Series
• Glyder ® GLV Series*
Nova T✩® NT Series
• Ariadni ® AYCL Series
• RadioRA 2® 10ND Series*
• Skylark® SLV Series
• Skylark® SLV Series
• Skylark ® Contour CTCL Series
• Maestro Wireless MRF2-6ND Series*
• Lutron ® Homeworks® RPM-4U*
• Lutron ® Homeworks ® QS HQRD-6ND Series*
• Lutron® Homeworks ® QS HQRD-10ND Series*
•
•
- Lutron® Model Numbers :
•
SureSlide 6633*
Leading Edge Dimmer
• Skylark® SELV Series*
Diva® DVELV Series*
Nova T✩® NTELV Series* • RadioRA RRD-6NA Series*
• Maestro MAELV Series* • Maestro MRF2-6ELV Series*
• Lutron® Grafik Eye PHPM-PA Series
• Lutron® Homeworks® QS HQRD-6ND Series*
•
•
DOWN LIGHTS AND MORE
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
PHOTOMETRIC REPORT
6“ LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter
6” LED
HOUSING COMPATIBILITY
LED-AF6AD ETL Listed for installation in the following Lumtech E26 screw based 6” standard and shallow recessed housings;
• 6” : IH-620ICA, IH-620ICAR, IH-610, IH-610R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R
LED-AF6AD ETL Classifed for retrofit in the following 6” recessed housing;
• Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT,H7TNB, H7TCP, H7UICT,H7UICAT, H27ICAT,
H27RICAT, H27ICT,H27RICT,H27T,H27RT
• All-Pro : EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT,
EI2700, EI2700R, ET2700, ET2700R
• Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, TC20, TC20R
• Capril : CR1, pr1, QL1. R9ASIC
• Lithonia : L7X, L7XP
• Thomas : PS1, R9ASIC/PS9RM
• Prescolite : IBXS
PHOTOMETRIC REPORT * Contact Factory for IES File
2.0ft
4.0ft
90˚
6.0ft
80˚
70˚
8.0ft
60˚
50˚
10˚ 20˚
30˚
73.9˚
40˚
[LED-AF6AD]
ORDERING INFORMATION
Housing
Color Temp.
Driver
Trim Finish
LED-AF6AD
-27 : 2700K
-30 : 3000K
-40 : 4000K
-DOB: 120V Driver on Board
-BLANK : Standard White
(consult factory for custom finish)
(dimmable with
any
Line or Low Voltage
Dimmer)
Example : LED-AF6AD-30-DOB
DOWN LIGHTS AND MORE
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA LIGHING SYSTEMS
DOWNLIGHTS AND MORE
A DIVISION OF ALPHA UGH/NG SYSTEMS
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com
TEL/FAX: 866-956-5646 www.downlightsandmore.com Email: downlightsandmore@gmail.com