PROJECT NAME:
CONSTRUCTION OF MENTAL HEALTH
CENTER-Halhoul
Palestinian Authority
Ministry of Health
Donner:
Group Agence Francaise De Developpement
Implemented By:
United Nation Development Programe
Programe Of Assistane to the Palestinian People
In Coordination with Ministry Of Health
Designed By:
Al-Ta'meer Office for Engineering Studies and
Consultations
Bill Of Quantities
Mental Health Center / Halhoul
Bill of Quantities
Item
1.00
Description
Demolishing Works
Unit
Qty
1.01
Dismantle and remove all obstacles on the existing roof in
order to start the construction of the new floor. Unit price shall
include cost of demolishing and removal of all elements
covering the steel reinforcement for the columns starters on
the existing roof, such concrete, blocks, stone, filling
materials....etc, including the preserving and cleaning of steel
reinforcement for proper erection of the new columns (this is
true for all existing columns including perimeter columns),
also the price include dismantle and demolish parts of the
existing stone roof parapet at all height as shown on detailed
drawing (A04), Engineer instructions ,and specifications.
LS
1
1.02
Dismantle and rebuild the existing stone coping. The price
includes stone pointing according to drawing (A04) , Engineer
instructions ,and specifications.
MR
55
1.03
Demolish and removal of concrete slab of the staircase
,including the protection and preservation of all existing
finishing works, and all other electrical& mechanical utilities,
fittings and equipments, machines. …etc.
M.S
18
1.04
Demolish and removal of the cement sand screed on the
existing roof. Rate includes removal of bituminous membrane
and all requirements as per specification, drawings &
engineer instructions.
M.S
117
The Contractor shall when pricing the rates of the bills, take
into consideration to include and allow for costs or expenses
of all requirements stipulated in the preambles, drawings, and
technical specifications, bearing in mind that the constriction
works should not impede or affect the daily activities of the
functional health center underneath.
The unit rate
shall include the following costs :
Total section 1, demolishing works carried to summary
1 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
2.00
Concrete Works
Unit
Qty
Stairs, landing, and where required. Price includes making
opening in the existing wall for drop beams ,and the drop
beams as per drawing (S06 ),and specifications.
M.C
3
2.02
Supply and cast reinforced concrete grade 'B 300' for
columns with a minimum cement content of 400 Kg. per cubic
meter
M.C
6
2.03
Supply and cast 26cm thick ribbed slab. Unit price shall
include cost of supplying and laying lightweight blocks density
25kg/m³, (Etolite size 50X20X12, the cement block is 6cm
thick) and the required steel reinforcement. Price shall include
drop beams, projected beams, and all other beams and
projections as per drawing (S06 ),and specifications.
M.S
130
2.04
Supply and cast 15cm thick solid slab. Unit price shall include
cost of supplying and laying the required steel reinforcement,
beams as per drawing (S09) ,and specifications.
M.S
18
Supply and cast the specified concrete for all bill items
described below. Price shall include cost of supplying and
fixing the required steel reinforcement, as per the drawings
and specifications, all the associated costs of material and
workmanship.Net engineering measurement will be
considered.
2.01
Supply and cast reinforced concrete grade 'B 300' with a
minimum cement content of 350 Kg. per cubic meter for
Total section 2, concrete works carried to summary
2 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
3.00
Stone Works
Unit
Qty
The contractor shall, when pricing the rates of this bill, shall
include costs and expenses of all the requirements stipulated
in the preambles, drawings and specification. Unit rate of the
stone wok shall be in accordance with specifications and shall
covers all costs detailed here below:
Supply and build stone ‫ ﻧﺟﺎﺻﺔ‬class A-A, ‫ ﺑﻧﺩ ﺍﺭﺿﻲ‬complying to
the general and the following specifications:
- Absorption by weight should not exceed 0.9% using ASTM
test method C97
- Density (Kg/m3) should not be less than 2700Kg/m3 using
ATSM test method C97
- Compressive strength should not be less than 56MPa using
ATSM test method C170
- Modulus of rupture should not be less than 6.9MPa using
ATSM test method C99
- Abrasion resistance (hardness) should not be less than 10
using ATSM test method C241
- stone should be clear, free from all veins, cracks and salt
holes from both sides
B200 concrete backing, 15cm thick, behind stone as per
drawings and as required.
Flush pointing works composed of white cement and sand
(1: 2) with approved additives for better workability, tightness
and water proofing.
Cost of all required stone pieces, similar to the pieces at
the existing stone work, unless otherwise specified.
Cost of stone lintels, window jambs, corner stones 12
cm thick, similar to existing, including steel reinforcement.
Steel reinforcement for stone cladding of 6mm steel mesh
@ 20cm both directions. The stone shall be fixed to the steel
and concrete by drilling 2 holes in each stone and using 3mm
galvanized steel wires.
3.01
Supply and build 5cm thick stone for walls, as per drawings
and specifications, and Engineer instructions.
M.S
220
3.02
Supply & install one side edge dressed stone coping 3cm
thick and of (25) cm width for the roof parapet copping
"Jama'een stone" . The price includes stone pointing.
according to drawings, Engineer instructions ,and
specifications.
M.R
24
3.03
Supply & install one side windows sills 3cm high, 33 cm wide.
M.R
20
Total section 3, stone works carried to summary
3 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
4.00
Block works:
The contractor shall, when pricing the rates of this bill, take
into consideration including and allow for the costs or
expenses of all requirements stipulated in the preambles,
drawings and technical specification of the contract.
Unit
Qty
Pre cast Concrete hollow bearing blocks built in cement sand
mortar (1:3) mix as specified.
Supply and install hollow concrete blocks built with cement
sand mortar (1:3) mix as specified. The unit price shall
include cost of 20cm minimum high concrete lintel
beams (ring beam) above concrete block walls, at
doors/windows level, and at all block walls parameter. Unit
rate shall include cost of steel reinforcement of 4Ф12mm steel
bars with Ф 6mm stirrups@20cm c/c.
4.01
7cm thick hollow concrete blocks
M.S
200
4.02
10cm thick hollow concrete blocks
M.S
65
4.03
20cm thick hollow concrete blocks
M.S
15
Total section 4, block works carried to summary
4 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
5.00
Roofing works:
Unit
Qty
5.01
Supply and install 4 mm thick layers of modified bituminous
membrane like Pazkar SBS 5/250 laid above two primer
coats of GS474 at a rate of 0.25 kg /m2 or equivalent
approved by the engineer on a clean surface of the roof
tiling and around the parapets. The price includes supply and
install an approved sealant cover at groove. The price
includes also supply and install 7*7cm angle fillet as shown in
the drawings. The application should be carried out in
conformity with the manufacturers’ specifications and using
propane torch welding only.
M.S
165
5.02
Supply and install a rigid polystyrene boards 3cm thick
"Randopan" or equivalent with density 32kg/m³ where
needed as per drawings , specifications and engineers'
instructions.
M.S
200
5.03
Supply & cast special plain concrete for screed on the roof
with 1% slope, min thickness 3 cm at the drain point. Rate
include lining, hunching 5x5 cm with (45º) to the edge of roof
screed and parapet, rate also include smooth surface finish to
receive bitumen and all requirements as per specifications,
drawings & engineer instructions.
M.S
130
The contractor shall, when pricing the rates of this bill, take
into consideration to include and allow for the costs or
expenses of all requirements stipulated in the preambles,
drawings and technical specification of the contract.
Total section 5, roofing works carried to summary
5 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
6.00
Plastering Works:
The contractor shall, when pricing the rates of this bill, take
into consideration including and allow for the costs or
expenses of reinforcing wire mesh , stop beads , angle beads
, bonding agent and all requirements stipulated in the
preambles, drawings and technical specification of the
contract.
Unit
Qty
6.01
Minimum three coats of internal plastering for the walls and
two coats for ceilings, composed of a bond coat, a base coat
1:4, and a finishing coat 1:5 as specified.
MS
350
6.02
Supply and apply cement sand filling layer to the ceiling and
walls above false ceiling level.
MS
110
6.03
Ditto, but external plastering for parapet, walls and wherever
needed composed of 3 coats a bond coat 1:1, a base coat 1:4
and a finish coat 1:2 with waterproofed liquid all as specified.
MS
65
Total section6, plastering works carried to summary
6 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
7.00
Floor and Wall tiling:
Unit
Qty
7.01
Supply, Install and finish class "A" 30x30 cm Terrazzo floor
tiling , with Italian marble chipping # 4. Price shall include,
bedding and jointing in cement and sand mortar, grouting
with white cement, required sand fill, polishing and cleaning.
Price shall also include Terrazzo skirting size (30 x 7 x 1.5)
cm.
M.S
95
7.02
Ditto, but for staircase landing. Price shall include marble
skirting.
M.S
7
7.03
Supply and install glazed tiles for walls cladding 20x20 class
(A), Spanish made or equivalent. The tiles shall be laid and
fixed to the walls by approved bonding agents. Price includes
cost of surface preparation to receive tiles , which shall
include two coats of cement plaster (scratch and float coat)
and approved adhesive materials, accessories and
grounding. Color of the tiles shall be as chosen by the
Engineer.
M.S
35
7.04
Supply and install non slip 20x20*0.7cm ceramic tiles,
Spanish made or equivalent class (A) for flooring, as
specified and approved by the Engineer. The price includes
the mortar (1:3) the sand cement fill. The color of the tiles
shall be as chosen by the Engineer.
M.S
15
7.05
Supply and install first quality 3cm thick local marble(SURMEEN) for stair threads, 115x35x3cm, polished one face &
edge . The threads should be bedded on 3cm mortar (1:3).
The rate also includes cost of marble risers and skirting .
MR
23
Total section 7, Tiling works carried to summary
7 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
8.00
8.01
Carpentry and joinery works:
Wooden doors and windows:
Supply and install the following 45mm thick plywood doors,
the unit rate should include the following costs:
Door frame made of soft wood, thickness 45 mm to be fitted
to over all width of the walls.
4.5x3.5 cm soft wood around the door leaf.
9.5x3.5cm soft wood frame all around the door leaf grooved
to receive the door fill
Lockers and cylinders type Wally (Original), bathroom lock
and cylinder
4mm plywood facing from both sides, with 6mm thick glass,
as shown on drawings.
Soft wood Recitative (4x1.2)cm
Unit
Qty
Door stopper as made by Domicile # DH005
Panting the door and frames with oil paint, as instructed and
approved by the Engineer. Unit rate shall include cost for
preparing surface, sanding, primer, two coats of putty, one
undercoat and two coats of matt enamel paints mixed colors.
8.1.1
Single Wooden door D1, with an overall dimensions of
210x90cm. As shown in drawing (A27)
No
2
8.1.2
Single Wooden door D2 with hinge in two directions, with an
overall dimensions of 210x80cm. As shown in drawing (A27)
No
2
8.2.
Fabricate, supply and install the following units, as per
drawings with all fixing accessories, drawers, shelves,
hardware, and ironmongery and made of:18mm or 30mm
thick plywood for wall hung and lower cabinets, 12mm thick
sandwich panel for shelves laminated with regular Formica.
For dimensions refer to detailed drawings. Room No.S 05
kitchen lower cabinets including granite absolute counter top
"Tiger eye" with top& bottom skirting, beads, polishing,
rounding, jointing…etc,and all preparatory works for the
installation of the required sink and sanitary fixtures. As
shown in Drawing(A 32)
L.S
1
Total section 8, carpentry and joinery works carried to summary
8 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
9.00
Suspended ceiling:
Unit
Qty
M.S
90
The contractor shall, when pricing the rates of this bill, take
into consideration including and allow for the costs or
expenses of all requirements stipulated in the preambles,
drawings and technical specification of the contract. Rates for
all suspended ceilings works includes suspension system with
anchors to the structure, L& Z, main& main profiles, omega
profiles. clips, gaskets and all necessary fittings in
accordance to the manufacture technical data and related
standards covering this type of works, The rate includes also
cutting and preparation for installing lighting fixtures, ceiling
recess, maintenance openings, grills, ceiling utilities... etc.
9.01
Supply and install 60*60cm suspended ceiling ECOPHONE
HYGIENE Type Protect "A" ( perforated). The price should
include galvanized suspension system with anchors to the
structure, bacterial resistant, moisture resistant, with standing
relative humidity up to 95% at 30c fire resistant tiles, including
access panels, fittings, fixing, installation of a closed cell
gasket between the grid and panel including retention clips to
insure good seal , complete all as specifications and drawings.
Total section 9, Suspended Ceiling works carried to summary
9 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
10.00
Steel and miscellaneous metallic works:
The contractor shall, when pricing the rates of this bill, take
into consideration including and allow for the costs or
expenses of all requirements stipulated in the preambles,
drawings and technical specification of the contract.
10.01
Unit
Qty
No.
1
L.S
1
M.S
25
M.R
8
The unit rate for steel works includes the following costs:
A. The submittal of shop drawings for the review of the
Engineer prior to fabrications.
B.Supply and apply two coats of oil painting for the metallic
surfaces, including putty, primer, as per specifications and
the engineer's satisfaction.
Steel doors
Supply and install the following steel doors and frames
similar to "Super Nimer ", as per details. The price should
include the following :galvanized sheet cover , braces, frame,
insert, rubber, hinge, SN1500, and rock wool. The price
includes painting two coats of antirust paint and powder
coating paints.
10.1.1
10.1.2
10.02
galvanized steel door type D3 with over all dimensions
(2.10*1.10) m, cylinder number SN1500 on the roof. Drawing
(A 28)
Maintenance and preserving the existing Door D3 at the
entrance of Proposed Second Floor, The contractor should
take all measures to protect this door.
WINDOWS STEEL PROTECTION
Supply and install security steel for windows' protections as
per drawings including painting two coats of antirust paint.
Metallic steel protection W1(1.20*1.56)m
,W2(0.6*1.04)m,W3(2.5*1.56)m, and W4(1.2*1.56)m made
of solid steel bars as per drawing (A 31) , and the existing
steel protections.
10.03
Stairs Balustrades
Supply and fix balustrades of seamless steel profiles, as per
Detailed Drawing.
Stairs handrail of 30*30*2mm rectangular hollow section,
1.25"*2 mm circular hollow section, and F14mm@15cm solid
steel rods, price to include fixing complete using M12 bolt Nut
and washer, oil paint three coats in addition to printer coat. as
per drawing (A 23),and specifications
Total section 10, Steel and miscellaneous metallic works carried to summary
10 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
11.00
Aluminum Works:
Unit
Qty
Supply and install the following powder coated Aluminum
windows made of "Nabco 4500" profiles, or equivalent, for
the side hung casement or bottom hung windows. Nabco
profile 7700 for sliding windows three rails. The unit rate shall
include double glazing 4:9:4 mm fly screens, all
accessories such as hinges, locks, brushes, rubber EPDM,
sealant.(original from "ARPAL & BALMA" or equivalent) as
approved by engineer. Color of the windows shall be similar
as the existing windows using aluminum angles 9*4.5cm
11.1.1
Type W1, of overall dimensions 120x156cm,Drawing(A29)
No
8
11.1.2
Type W2,of overall dimensions250x156cm, Drawing(A29)
No
2
11.1.3
Type W3, of overall dimensions 60x104cm, Drawing(A29)
No
3
Total section 11, Aluminum works carried to summary
11 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
12.00
Painting And decorative Works:
Unit
Qty
Paint type and works should conform to the highest
Standards and as approved by the Engineer.
12.01
Supply and apply of emulsion paint, super-cryle, sanding,
priming, putty, under coat, and finishing coats, compete to the
satisfaction of the Engineer.
M.S
320
12.02
Supply and apply three coats of poly-cide paint for ceilings
M.S
40
12.03
Supply and apply two coats of oil paints on walls. Price shall
include surface preparation, priming, two coats of putty.
M.S
70
Total section 12, painting works carried to summary
12 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
13.00
Pre-fabricated movable wall partitions:
Supply and install two folding partitions Model 420 Paired
Panel Operable Wall with two doors manufactured by Panel
fold Module Series Company ,Maiame,Folorida,USA.catlouge
No 600 Paired Panels Model 620 or Equally Approved . The
contractor shall submit the necessary shop drawing. The work
shall be completed according to the manufacturer
instructions, the drawings, and the following details:
- Acoustical rating STC: 50
- Panel Thickness: 3 ¼” 83 mm
- Panel Frames: Heavy-duty steel-gusseted aluminum inner
frames reinforced with full height formed steel framing
astragals
- Panel Faces: Standard pin-tack able gypsum board
substrate machine bonded to frames and Sheer Look trim
less wrap-around panel edges
- Track Type: Type 7/8 heavy-duty aluminum track with 6”
hanger rods
- Top & Bottom Seals: Top sweep seals and 1 ½” operable
bottom Manu seals
- Final Closure: Expandable wall-to-wall
- Pass Doors: two
- Surfacing Material: Standard Vinyl text Vinyl
- The first partition in the room s01 to be installed from wall
to wall
- The second partition shall be installed from the wall to
movable galvanized 100*100* 4 mm this profile at the
connection point of the two partitions
Total section 13, Other works carried to summary
13 / 22
Unit
Qty
M.S
36
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
14.00
Unit
Description
Electrical Works
Preamble
*-In the list of recommended makes, out of two or three
makes mentioned in the list, only 1st. make shall be preferred
for use, unless otherwise specified in BOQ. However if nonavailability or any other technical reason, the alternative make
is allowed, it shall be subject to approval by the Engineer.
*-This Section shall be read in conjunction with general and
particular electrical technical specifications, the Electrical
Drawings, Addendums and invitation to bid conditions except
where otherwise indicated.
*-The unit price for all items in this Section shall include
Supplying, installation, connecting, testing, and
commissioning of electrical works and materials, unless
otherwise specifically mentioned or instructed by engineer.
*-All Civil and Finishing Works related to the concerned items
shall be included in the unit price.
*-Preparing of coordinated shop drawings and submitting to
engineer for approval, coordination with other activities,
material storage, removing away from site the remnant of
electrical works and handling over the electrical works to local
electrical authority. is contractor responsibility.
*- the contractor is requested to deliver (submit) all removed
materials to clinic authorized person.
*-light points/power point considered to include single core
(S.C.) cables, conduits, (from related DB) boxes and variant
types of control switches and socket outlets.
*-All embedded and surface mounted PVC conduits to be
flexible type of min. 20mm dia.
*-All parts of PVC conduits above false ceiling (conduit &
boxes) to be of fire retardant types.
*-Variant conduit colors to be used above false ceiling to
enable different systems recognition
14 / 22
Qty
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
14.01
XLPE / PVC /Multi-Core Copper Cables
Unit
Qty
M.L
60
No.
2
No.
1
Supply, install, connect, testing and commissioning of
600/1000V XLPE/PVC Multi-core copper cables including
cable glands, cable ties, labeling, pulling in conduit where
required and all associated accessories according to the
drawings, specifications and relevant codes, for:
14.1.1
5Cx6 mm² XLPE Cable
14.02
Circuit breakers
Supply, install, connect, testing and commissioning of circuit
breakers in existing MDB for final distribution boards
14.2.1
32A T.P MCCB
14.03
Final Distribution Boards
Supply , install, connect, test and commission of the following
floor/ wall mounted final distribution board, complete with
suitable CU fork BB, earth & neutral CU terminals, (mcb)
circuit breakers (6KA) according to IEC 60947, isolators,
earth leakage C.B, distribution terminal blocks. Panel made of
galvanized iron (GI) sheet steel, duly painted by two coats of
powder coating in grey after rinsing. the panel having Polly
Urethane (PU) neoprene rubber gasket of not less than 3mm
thickness, inner suitable dwg. holder pocket, hinged door
with locking arrangement for equipment switchgear. thickness
of sheet steel shall not be less than 1.5mm 60/80 cm W/L of
any compartment and be of 2.0mm thick above that. cable
entries to be achieved through suitable cable glands
according to drawings, specifications and relevant cods.
14.3.1
DB-S
14.04
Receptacles
Supply, install, connect, test and commission of the following
receptacles, including 20mm PVC conduits, single core (S.C)
cables (3X2.5mm²), terminal boxes, receptacle devices
(Gewwiss, Legrand) or equal approved as per drawings,
specifications and related standards.
14.4.1
Single-phase twin socket, 16A
No.
3
14.4.2
Single-phase socket, 16A
No.
9
14.4.3
Single-phase socket, 16A(water proof)
No.
3
14.4.4
16A, Single Phase wall mounted socket outlet for split units
No.
11
14.4.5
16A, Single Phase ceiling mounted socket outlet for split units
No.
3
14.4.6
32A three phase isolator with waterproof enclosure on
painted steel angle base
No.
1
14.05
Under Floor Boxes
14.5.1
under floor service Box contains 2 No. twin power sockets
,2no. telephone sockets,4no. data sockets
No.
2
15 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
14.06
14.07
Description
Light Points
Supply, install, connect, test and commission a complete
internal/ external embedded or exposed lighting points
including, PVC conduits, single core (S.C) cables (3*1.5mm²)
or (3*2.5mm²) , switches or PB,s (Gewiss/ Legrand) or equal
approved, boxes, ceiling rose, fire retardant silicon flexible
connection cables and all other accessories. as per drawings
specifications and related standards.
Unit
Qty
No.
26
No.
10
No.
3
No.
2
No.
5
No.
2
No.
2
No.
2
No.
3
Lighting Fixtures
Supply, install, connect, test and commission the following
complete lighting fixture, including all supports,Tri-Phosphore
lamps of (860 Osram or Phillips), high reflectance parabolic
Al. louvers, clamps, class B1 magnetic control gear,
electronic starter, fire retardant internal conducting cables,
and all other necessary accessories as per drawings,
specifications and related standards.
14.7.1
14.7.2
14.7.3
14.08
14.8.1
14.8.2
14.8.3
14.09
Note: the contractor is requested to consider lighting fixture
suspension system of chains and hooks for recessed fittings
where necessary.
4*18W recessed fluorescent with electronic starter and
Magnetic CG, body made of enameled sheet steel with U AL.
reflector .
-2*18WPL 30cm DIA. surface mounted IP54 as POLO or
equal approved for path rooms
-2*18WPL 30cm DIA.wall mounted IP54 as POLO or equal
approved for path rooms
Lighting Fixtures with Emergency Kit
Same as item (14.7) but lighting fitting to be equipped with
self contained, non-maintained Emergency Lighting Kit. The
kit shall provide 3 hours operation after mains failure for
1x18/1*36 watt-Fl or PL lamps with nickel cadmium battery
(Osram or Tridonic) factory assembled as per specifications,
drawings and related standards.
4*18W recessed fluorescent with electronic starter and
Magnetic CG, body made of enameled sheet steel with U AL.
reflector with Em. Kit
-2*18WPL 30cm DIA. ceiling mounted IP54 as POLO or
equal approved for path rooms with Em. Kit
-2*16WPL 30cm DIA. surface mounted for staircase with
emergency kit
Exit Lighting Fixtures
Supply, install, connect, test and commission complete self
contained, non-maintained EXIT lighting luminaries. The
luminaries shall provide 3 hours operation after mains failure,
it shall be complete with 2x8 watt lamp, body to be of white
stove enameled sheet steel and ultra transparent acrylic sign,
nickel cadmium battery and to provide not less than 0.2 LUX
illumination level similar to Bighelli or equal, as per
specifications, drawings and related standards.
14.10
14.10.1
Computer Data Point (RJ 45)
Supply, install, connect, test and commission complete data
point including boxes,condiuts, RJ-45 (3M) socket outlet with
8 pins being crimped and also earth pin with (Cat 6A) FTP
(4x2x23) data cables as per drawings, specification and
related codes.
single RJ45 computer socket
16 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
14.11
Description
Fire-Alarm System
Supply, install ,testing and commissioning of the following fire
alarm system including conduits, cables, boxes and all
accessories as per drawings, specifications and related codes
as following:
Unit
Qty
14.11.1
4 Zone conventional fire alarm panel with backup battery
No.
1
14.11.2
photo-optical smoke detector.
No.
7
14.11.3
photo-optical heat detector.
No.
1
14.11.4
manual addressable pull station (break glass).
No.
1
14.11.5
Siren.
No.
1
14.12
Patch Panels (PP)
Supply, install, connect, test and commission the following
Cat6 Patch Panels with switch and air PP in between
complete with 6U cabinet, power distribution unit, patch
cables, rack accessories and all accessories as per
specifications and drawings.
14.12.1
(6U) HUB cabinet
No.
1
14.12.2
24 port patch panel
No.
1
14.12.3
air patch panel
No.
3
14.12.4
Patch cables
LS
1
14.12.5
Power strip
No.
1
14.12.6
24 ports switch
No.
1
14.12.7
Telephone point
No.
1
10/5cm PVC trucking
ML.
70
up grading the power of the common connection point (ccp)
from 32A s.p up to 100A t.p including carrying on contacts
with electric utility .In addition to consider required paying all
required fees in the price of this item.
job
1
14.13
14.13.1
14.14
PVC trucking
Total section 14, Electrical works carried to summary
17 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
15.00
MECHANICAL WORKS
Unit
Qty
a- Ø2" HDPE pipes
M.L
6
b- Ø4" HDPE pipes
M.L
10
No.
5
No.
1
No.
2
No.
2
Preamble
*-This Section shall be read in conjunction with the general,
particular Mechanical technical specifications, Mechanical
Drawings and invitation to bid conditions.
*-The unit price for all items in this Section shall include for
supply, installation, connecting, testing, and commissioning,
unless otherwise specifically mentioned or instructed by the
Engineer.
*-All Civil and Finishing Works related to the concerned item
shall be included in the unit price.
*-Preparing of coordinated shop drawings and submitting for
engineer approval, coordination with other activities, material
storage, removing away from site the remnant of electrical
works and handing over the Mechanical works to Mechanical
works to the authorized Engineer .
15.01
15.1.1
Waste Water Drainage System:
HDPE pipe
Supply, install, testing and commissioning of the following
waste water drainage HDPE pipes or equivalent including,
pipe fittings, connection to drainage system manholes,
required sleeves and all necessary accessories as per
drawings, specifications and related codes.
15.1.2
15.1.3
Floor Drain
Supply, install, testing and commissioning of, 4"chrome plated
threaded 15x15cm cast brass cover, multi inlet adjustable
with trap floor drain. Including, floor clean out plug, HDPE
siphon or equivalent and necessary accessories, connections
with fixtures and main drain pipes. as per drawings,
specifications and related codes.
Clean Out
Supply, install, testing and commissioning of the following,
HDPE or equivalent , non adjustable 15x15 cm stainless steal
cover, and floor clean out with gas and water tightness ABS
plug and necessary accessories as per drawings,
specifications and related codes.
15.02
15.2.1
Ø4" clean out
Sanitary Fixture and Their Accessories:
Lavatory
Supply, install, testing and commissioning of, 'Wall mounted,
slab type, vitreous china, or equivalent lavatory (approximate
bowl size 20"x18") with: faucet holes on 4" centers; suitable
for use in clinics, offices, washrooms or patient care area as
per specifications, drawings and related codes.
15.2.2
Water Closet
Supply, install, testing and commissioning of, floor mounted,
white color, Porcelain, siphon jet water closet/toilet with an
elongated bowl, seat with open front and check hinge, and
carrier. or equivalent including necessary accessories, 9-lt
capacity cistern, valves, fittings, 13mm stop angle valves,
chrome plated 13mm hose, heavy duty side l m length 13mm
Chrome plated hand shower, connection to drainage and
water systems as per drawings, specifications and related
codes.
18 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
15.2.3
15.2.4
Description
Unit
Qty
Paper holder
Supply and installing of: surface mounted, satin finish
stainless steel, sanitary napkin disposal or equivalent .
Disposal features a flip-up cover, secured to the container by
a heavy duty stainless steel piano-hinge. Disposal secured to
wall or toilet partition. For general purpose use in female
toilet stalls or rooms and unit-sex toilet rooms. with required
fixing accessories, as per drawings, specifications and the
approval of the Engineer.
Sink (General)
No.
2
No
1
No.
3
No
2
Supply, install, testing and commissioning of, Single
compartment stainless steel sink or equivalent , drop-in, selfrimming, ledge-type, connected with a drain. It shall be
provided with pre-punched fixture center hole, integral back
ledge to accommodate deck-mounted fixtures, brushed
interior and top surfaces, sound deadened. Recommended
for use in suspended or counter top, sink cabinets having a
high plastic laminate or Chemsurf laminate countertop/work
surface. Coordinate actual outside sink dimensions with the
actual clear dimension of cabinet specified to ensure that they
are compatible. For general purpose use throughout the
facility. as per specifications, drawings and related codes.
15.2.5
Counter top Kitchen sink
Faucet
Supply, install, testing and commissioning of, Chrome plated
cast brass construction, washer less ceramic disc mixing
cartridge, gooseneck spout, with elbow/ wrist/ gear blade
control handles or equivalent . including, sockets, copper
adaptors, 3/8" angle valves and all necessary accessories, as
per drawings, specifications and related codes and RE
approval.
Single lever Gear control handle faucet.
15.2.6
Mirror
Supply, install, testing and commissioning of, high quality 1/4"
polished float glass mirror 36X18 or equivalent , framed in a
one-piece, bright polished, stainless steel channel frame with
90° mitered corners. All edges of the mirror are protected by
absorbing filler strips. Mirror has a galvanized steel back with
integral horizontal hanging brackets and wall hanger for
concealed mounting. For mounting above single wall
mounted lavatories located in toilet areas, Doctors
examination offices, etc. May also be used above double
lavatories, either wall or countertop mounted. as per
drawings, specifications and RE approval.
15.03
Hot and Cold Water Collectors
Supply, install, connect, testing and commissioning of, hot
and cold water 3/4" collectors (GIACOMINI or E.A.), Inlets/
Outlets quick shut-off valves, record valves, nipples, nuts,
unions, brass fitting adapters, price to include; cabinet (60 cm
X60 cm) made of 1.5mm galvanized steel with 1.5 mm 304
stainless steel hinged lockable door, and all necessary
accessories. as per drawings and related codes.
Ø1/2"
Eye
3
Ø1/2"
Eye
7
19 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
15.3.1
Unit
Qty
a- Ø1/2"
M.L
40
b- Ø3/4"
M.L
5
Hot Water and Storage Tank Replacement
Dismantle and relocate the existing water heating and storage
system, from existing roof to proposed new roof, including all
required accessories .
Air Conditioning VRV System
JOB
1
a- 12,000BTU/H ( wall mounted type )
No.
11
a- 18,000BTU/H ( cassette type )
No.
2
b- 24,000BTU/H ( cassette type )
No.
1
No.
1
a-150cfm tube fan window mounted
No.
1
b-120cfm tube fan window mounted
No.
1
c-100cfm tube fan window mounted
No.
1
Description
Cold and Hot water PEX. Pipes
Supply, install, testing and commissioning of, 16mm PEX
pipes in 25 mm sleeve pipe. The rate to include; copper
elbows (type GIACOMINI), 1/2" male and female adaptors
and all accessories for connection between copper collectors
to fixtures as per drawings, specifications and related codes.
15.3.2
15.04
Supply and installation testing and commissioning of the
following spilt unit, ceiling mounted cassette and wall
mounted type indoor unit, complete with electrical
connections, insulated PVC drained pipe, indoor/ outdoor
hanging supports and insulated copper pipes with necessary
accessories. as per drawings and related codes.
.
15.4.1
VRV OUTDOOR UNIT
Supply & install, testing and commissioning of, outdoor 15
T.R air source heat pump consisting of: Factory made and
assembled 15 Ton class 2, minimum (HSPF of 8, SEER of
12) modular microprocessor (IGCT) based VFD controlled
heat pump for VRV purpose. including air/air heat exchanger,
condenser, compressor and necessary casketing to perform
the functions of heating and cooling of air. This to be
contained in double wall galvanized steel construction case
located on painted steel base with vibration absorbers as per
drawings, specifications and AHRI 430, AHRI 410, ASHRAE
51 and AMCA 210 codes. Note: Refrigerant gas to be of zero
Ozone depletion potential (ODP) as R410A. all as per Sanyo ,
Daikin ,Samsung or EA .
15.05
15.5.1
Ventilation
Exhaust Fans
Supply, install, connect, testing and commissioning of, wall/
glass mounted exhaust fans with gravity shutter driven by IP
65 electric motors. Price shall include all required electrical
connections as per specifications, drawings and related
codes.
Total section 15, Mechanical works carried to summary
20 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
Item
Description
16.00
External Works-Provisional
Unit
Qty
16.01
Supply and compact base course, average 20 cm. thick,
under ground slab on hard-core. Price includes leveling,
watering, leveling and compacting of ground (sub-base)
under base course watered and compacted to min 95%
according to field density test T-80.
M.S
35
16.02
Supply and cast concrete B200 for external slab 10 cm. thick
at the place where indicated by the drawings . Price Includes
surface leveling, finishing, polyethylene sheets 500 micron,
steel reinforcement (1Ø 10@20 cm both way) and spreading
and compacting 20cm base course layer under the slab.
M.S
35
16.03
Plain cast rubble concrete B '200' with maximum 30% clean
crushed stones for flower boxes and as where directed by the
Engineer. Price to include form works, curing, smooth surface
finishing and using plastic triangle for edges and all related
works as per drawings.
M.C
3
16.05
Supply and cast concrete grade B '250' with a minimum
cement content of 300 Kg. per cubic meter above existing
boundary walls ,unit price shall include steel reinforcement
(1Ø 10@20 cm vertical and 1Ø 8@20 cm), all as directed by
Engineer and according to drawing (A33) , and specifications.
M.C
4
M.R
40
M.S
400
16.09
Supply and install suspended ceiling for canopy consists of
clay roof tiles (‫ )ﺍﻟﻛﺭﻣﻳﺩ‬,Steel frame, and Wooden boards ,the
price shall include the price of Steel Columns, Dismantle and
removing the Existing Steel Canopy and handed over to the
owner(Ministry of health).as per drawing (A22) ,engineer
instructions and Specifications.
M.S
6
16.10
Supply, Install and finish floor tiles(30*30)cm, similar to the
existing tiles. Price to include, bedding and jointing in cement
and sand mortar, pointing with white cement, required sand
fill, and on site grinding, polishing and cleaning.
M.S
25
PREAMBLE: - Measurement, rates and specification of all external works
shall comply with the works stated in previous sections.
- Base course works shall be in net square meter.
- Rates of asphalt and Base course works shall include:Leveling, watering and compacting of sub grade.
Spreading, leveling, watering and compacting the base
course to receive asphalt, Supply and apply asphalt concrete,
Spreading by using Finisher, Compacting.
Trimming, cutting and making good around edges openings,
corners and trenches. And all required sampling and testing.
16.07
16.08
Supply and Fix Balustrades Steel Bars above the boundary
wall consist of horizontal plate(5*25mm),vertical 16*16mm,
price to include fixing complete, oil paint three coats,
according to drawing(A 33), Engineer instructions ,and
specifications.
Apply cement sand plaster with "Shabrize" finishing coat for
the external walls. Price shall include metal lath and
waterproof additives.
Total section 16,external works( provisional) carried to summary
21 / 22
Unit Price
Amount
Mental Health Center / Halhoul
Bill of Quantities
SUMMARY
Sec.
Description
1-
Total of Demolishing Works
2-
Total of Concrete Works
3-
Total of Stone Works
4-
Total of Block Works
5-
Total of Ceiling Works
6-
Total of Plastering Works
7-
Total of Flooring & Covering Works
8-
Total of Carpentry Works
9-
Total of Suspended Ceiling Works
10-
Steel Works( IRONMOGERY)
11-
Total of Aluminum Works
12-
Total of Painting Works
13
Other Works
14
Total of Electrical Works
15
Total of Mechanical Works
16
Total of External Works(provisional)
Amount
GRAND TOTAL (including provisional items)
PERCENTAGE (.....%) DISCOUNT OR ADDITION.
NET GRAND TOTAL - Excluding Value Added Tax
Currency of Bid/BoQ ( NIS or US$ ) : ______________
THE SUM OF (in words) : - ______________________________________________________________
SIGNED AND SEALED.
AUTHORIZED SIGNATORY NAME: TITLE: SIGNATURE & STAMP: -
DATE :
22 / 22
/
/ 2011.