QUALITY IMPROVEMENT PROGRAMME
For
TEACHERS OF ENGINEERING INSTITUTIONS
Admission to
Master’s Degree Programmes
2005-2006
Sponsored by
All India Council for Technical Education
(A Statutory Body of the Government of India)
Quality Improvement Programme - Sponsored by AICTE
1
Dear Prospective QIP Scholar,
Your interest in the 'Quality Improvement Programme (QIP)' sponsored by AICTE is appreciated. As you may be aware, the
main objective of the programme is to upgrade the expertise and capabilities of the faculty members of the degree-level
engineering institutions and the National Institutes of Technical Teachers’ Training & Research (NITTTR) in the country. The
programme launched by the Government of India in the year 1970 is now being implemented and monitored by the National
QIP Coordination Committee funded through the AICTE.
There are three main activities under QIP serving the faculty of degree-level engineering institutions:
1.
Providing opportunities to faculty members of the degree-level engineering institutions to improve their
qualifications by offering admissions to Master's and Ph.D. degree programmes.
2.
Organizing Short Term Courses at the QIP Centres for serving teachers.
3.
Curriculum Development Cell activities which help to improve class room teaching.
The eight major QIP centres at IITs and IISc undertake the various activities listed above. Admissions to Master's and Ph.D.
programmes are also offered in selected areas in additional 17 recognized institutions. A large number of faculty members
from engineering institutions from all over the country have pursued Master's and Ph.D. degree programmes under this
scheme. These are aimed at improving the standard and quality of technical education through improvement of the
qualifications of the faculty members in the various engineering institutions.
The curriculum development cells have been set up at major QIP centers for improving the effectiveness of technical
education in the country. The activities include curriculum development and revision or preparation of monographs,
textbooks, teachers’ manuals, teaching aids and other resource materials, examination reforms, organizing inter-institutional
programs, seminars, workshops and panel discussions, development of educational technology, creation of methodologies
for formal and informal training, technical education of the handicapped etc.
A number of short term courses have also been organized by major QIP Centres for the benefit of the faculty members from
engineering institutions. The courses have proved very popular and useful.
This information brochure will give you the necessary information about the programme as well as about the requirements
and the procedure for applying for admission to M.Tech. programmes. The details of the disciplines and specializations
available at various centres are also included in the brochure to enable you to make appropriate choices.
Please note that the last date for the receipt of the application in the office of the Principal QIP Coordinator is
October 15, 2004.
The procedure of admission under QIP involves the following steps:
!
Scrutiny of all applications in the office of the Principal QIP Coordinator,
!
Short-listing by individual institutions for interviews and sending of call letters to those selected for interviews,
!
Recommendations by the institutions.
!
Final selection by the National QIP Coordination Committee (NQCC) and
!
Admission by the Institution where the final selection has been recommended by NQCC.
The admission letters will be sent to you by the institution offering admission.
The schedule of interviews at various QIP centres is given in the brochure so that you can plan your travel for attending the
interviews at places of your choice.
For further information about the QIP, the application form or any associated item, you may contact the Principal QIP
Coordinator or any of the Coordinators of the centres listed in the brochure.
For further information about a particular institution or a particular department therein, you may directly write to the Head of
the concerned department or the QIP Coordinator of the institution.
Wishing you all the best,
Principal QIP Coordinator
TABLE
OF CONTENTS
I.
GENERAL INFORMATION......................................................................................... ......................
1
II.
INSTITUTIONS OFFERING ADMISSION UNDER QIP TO MASTER’S DEGREE
PROGRAMMES AND THEIR CODES ....................................................................... ......................
2
CODE FOR DEPARTMENTS OFFERING ADMISSION TO MASTER’S DEGREE
PROGRAMMES UNDER QIP AT VARIOUS INSTITUTIONS ................................... ......................
3
IV.
ELIGIBILITY CONDITIONS ........................................................................................ ......................
5
V.
CONDITIONS FOR ADMISSION ................................................................................ ......................
5
VI.
DESIGNATION CODES.............................................................................................. ......................
5
VII.
APPLICATION FEE .................................................................................................... ......................
5
VIII. LAST DATE................................................................................................................. ......................
6
IX.
ENCLOSURES............................................................................................................ ......................
6
X.
INSTRUCTIONS FOR COMPLETING THE APPLICATION ...................................... ......................
6
XI.
CHECKLIST FOR EACH COPY OF THE APPLICATION FORM (including the
Principal QIP Coordinator’s Copy) .......................................................................... ......................
8
SCHOLARSHIP AND CONTINGENCY GRANT ........................................................ ......................
9
XIII. PROCEDURE FOR ADMISSIONS UNDER QIP ........................................................ ......................
9
XIV. SCHEDULE OF INTERVIEWS FOR ADMISSION TO MASTER’S DEGREE
PROGRAMMES UNDER QIP FOR 2005 –2006 ........................................................ ......................
10
III.
XII.
XV.
DEPARTMENTS & FIELDS OF SPECIALIZATION AT VARIOUS INSTITUTIONS . ......................
1 INDIAN INSTITUTE OF SCIENCE, BANGALORE - 560012 ........................................................ CODE: BG .........
2 INDIAN INSTITUTE OF TECHNOLOGY BOMBAY, MUMBAI - 400076 ...................................... CODE: BM.........
3 INDIAN INSTITUTE OF TECHNOLOGY DELHI, NEW DELHI, 110016 ....................................... CODE: DL..........
4 INDIAN INSTITUTE OF TECHNOLOGY GUWAHATI, GUWAHATI – 781039............................... CODE: GW ........
5 INDIAN INSTITUTE OF TECHNOLOGY KANPUR, KANPUR - 208016 ..................................... CODE: KN .........
6 INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR, KHARAGPUR - 721302........................ CODE: KH .........
7 INDIAN INSTITUTE OF TECHNOLOGY MADRAS, CHENNAI - 600036 ................................... CODE: MD.........
8 INDIAN INSTITUTE OF TECHNOLOGY ROORKEE, ROORKEE - 247667 ................................ CODE: RR .........
9 ANNA UNIVERSITY, CHENNAI - 600025 .................................................................................... CODE: AU .........
10 BENGAL ENGINEERING COLLEGE, HOWRAH - 711103 ......................................................... CODE: BE .........
11 INDIAN SCHOOL OF MINES, DHANBAD 826004 ...................................................................... CODE: IS...........
12 INSTITUTE OF TECHNOLOGY, BANARAS HINDU UNIVERSITY, VARANASI - 221005 ......... CODE: VN .........
13 JADAVPUR UNIVERSITY, KOLKATA 700032 ............................................................................. CODE: JU..........
14 MOTILAL NEHRU NATIONAL INSTITUTE OF TECHNOLOGY, ALLAHABAD - 211004 ............ CODE: MN.........
15 NATIONAL INSTITUTE OF INDUSTRIAL ENGINEERING, MUMBAI – 400087 ............................ CODE: NI...........
16 NATIONAL INSTITUTE OF TECHNOLOGY, CALICUT REC - 673601 ...................................... CODE: CL..........
17 NATIONAL INSTITUTE OF TECHNOLOGY KARNATAKA, SURATHKAL - 575025 .................... CODE: SK .........
18 NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELA – 769008 ....................................... CODE: RK .........
19 NATIONAL INSTITUTE OF TECHNOLOGY, TIRUCHIRAPPALLI – 620015 ................................. CODE: TR .........
20 NATIONAL INSTITUTE OF TECHNOLOGY, WARANGAL - 506004 ....................................... CODE: WR ........
21 PSG COLLEGE OF TECHNOLOGY, COIMBATORE – 641004 ................................................. CODE: PS .........
22 SHRI G.S. INSTITUTE OF TECHNOLOGY AND SCIENCE, INDORE – 452003 .......................... CODE: GS.........
23 SRI JAYACHAMARAJENDRA COLLEGE OF ENGINEERING, MYSORE – 570006 .................... CODE: SJ..........
24 UNIVERSITY VISVESVARAYA COLLEGE OF ENGINEERING, BANGALORE - 560056 ......... CODE: UV .........
25 VISVESVARAYA NATIONAL INSTITUTE OF TECHNOLOGY, NAGPUR – 440011..................... CODE: VR .........
10
11
14
17
19
19
22
25
27
30
31
31
31
31
32
33
33
34
36
37
37
38
38
38
39
39
I.
GENERAL INFORMATION
1.
Candidate should make sure that the set consists of
(a)
one form, marked as Copy for Principal Coordinator on top left corner of the form
with Data Sheet as fourth page – total of four printed pages for the Principal QIP
Coordinator and
(b)
six identical forms – 3 printed pages, one for each department in institution(s)
where admission may be sought.
Total seven forms and an Acknowledgement Card.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
The duration of the Master’s Degree Programme is 24 months.
Candidate should read the entire brochure thoroughly before filling and sending
Application Forms.
Concessions, relaxation and reservations for candidates belonging to SC/ST/OBC/
Physically Challenged categories etc. are as per rules.
The candidate and the forwarding Principal/Head of the Institution should ensure that
the application is sent to the office of the Principal QIP Coordinator well within time, so
as to reach on or before October 15, 2004. Applications received after this date will not
be considered.
The Application No. would be intimated through the Acknowledgement Card in due
course. This number should be quoted in all future correspondence related to
admissions, and such correspondence should be routed through the Principal/Head of
the candidate’s parent institution. The Application No. may be changed in some
unavoidable circumstances.
For application forms and Information Brochure, visit our website: www.iitkgp.ernet.in
or the same are available by Post on request to
DEAN, CE & PRINCIPAL QIP COORDINATOR
Continuing Education Programme
Indian Institute of Technology Kharagpur
Kharagpur – 721302
Information given by the candidate in each copy of the applications should be same. In
case of any difference found in experience, % of marks, designation, addresses, age etc.
his/her candidature is liable to be cancelled at any stage even after selection/admission.
Conditional recommendation by the Principal/Head of the Institution will not be
accepted.
Applications submitted without signatures of the candidate and the appropriate
authorities with seal, and/or without the required enclosures will automatically be
rejected.
Before mailing the completed forms, please ensure that each copy of application form
and its enclosures are properly fastened with a tag separately at the left-hand top corner.
The applicant is requested to use cloth-lined/thick envelope for sending application
form(s) within the stipulated last date of receipt.
Short-listed candidate will get Interview Call/Admission Call letters from the QIP
Coordinator of the Institute, where they have applied to seek admission. Principal QIP
Coordinator will not send any Call letters to the candidates directly.
Interview schedule mentioned in Section XIV is final and it cannot be altered/changed
under any circumstances. Candidate has to appear for interview at the Institute(s), where
he/she would like to seek admission.
Quality Improvement Programme - Sponsored by AICTE
1
15.
II.
The schedule of interviews at various QIP centres is given in the Section XIV of the
brochure so that you can plan your travel for attending the interviews at places of your
choice.
INSTITUTIONS OFFERING ADMISSION UNDER QIP TO MASTER’S DEGREE
PROGRAMMES AND THEIR CODES
S No.
Name of the Institute/University
Code
Institutions having Major QIP Centers: The following institutions having QIP Centers offer
admission to Master’s degree (2 years) Programmes in many disciplines existing in those institutions
(see Section XV for details):
1.
Indian Institute of Science, Bangalore – 560012
BG
2.
Indian Institute of Technology Bombay, Mumbai – 400076
BM
3.
Indian Institute of Technology Delhi, New Delhi – 110016
DL
4.
Indian Institute of Technology Guwahati, Guwahati – 781039
GW
5.
Indian Institute of Technology Kanpur, Kanpur – 208016
KN
6.
Indian Institute of Technology Kharagpur, Kharagpur – 721302
KH
7.
Indian Institute of Technology Madras, Chennai – 600036
MD
8.
Indian Institute of Technology Roorkee, Roorkee – 247667
RR
Other Institutions having Minor QIP Centres: The following recognized institutions also offer
admission to Master’s Degree (2 years) Programmes under QIP in some specific departments as
given below (see Section XV for details):
9.
Anna University, Chennai – 600025
AU
(i) Civil Engg.
(ii) Electrical & Electronics Engg.
(iii) Chemical Engg.
(iv) Leather Technology
10.
Bengal Engineering College, Howrah – 711103
BE
(i) Civil Engg.
(ii) Electrical Engg.
11.
Indian School of Mines, Dhanbad – 826 004
IS
(i) Fuel & Mineral Engg.
(ii) Mining Engg.
12.
Institute of Technology, BHU, Varanasi – 221 005
VN
(i) Metallurgical Engg.
(ii) Mining Engg.
13.
Jadavpur University, Calcutta – 700 032
JU
(i) Electrical Engg.
(ii) Electronics & Telecomm. Engg.
(iii) Mechanical Engg.
(iv) Production Engg.
MN
14.
Motilal Nehru National Institute of Technology, Allahabad–211004
(i) Applied Mechanics (ii) Civil Engg. (iii) Computer Science & Engg.
(iv) Electrical Engg. (v) Electronics Engg. (vi) Mechanical Engg.
15.
National Institute of Industrial Engineering, Mumbai – 400087
NI
(i) Industrial Engg.
16.
National Institute of Technology, Calicut - 673 601
CL
Offer admission to Master’s degree programmes in many disciplines (see
Section XV for details)
17.
National Institute of Technology Karnataka, Surathkal – 575025
SK
Offer admission to Master’s degree programmes in many disciplines (see
Section XV for details)
18.
National Institute of Technology, Rourkela – 769008
RK
(i) Civil Engineering
(ii) Mechanical Engg.
19.
National Institute of Technology, Tiruchirappalli – 620025
TR
(i) Civil Engg. (ii) Computer Science & Engg. (iii) Electrical & Electronics Engg.
(iv) Mechanical Engg. (v) Metallurgical Engg. (vi) Production Engg.
2
Quality Improvement Programme - Sponsored by AICTE
S No.
20.
21.
22.
23.
24.
25.
Name of the Institute/University
National Institute of Technology, Warangal - 506004
(i) Civil Engg. (ii) Electrical Engg. (iii) Electronics & Communication Engg.
(iv) Mechanical Engg.
PSG College of Technology, Coimbatore – 641004
(i) Computer Science and Engg. (ii) Electrical & Electronics Engg.
(iii) Mechanical Engg. (iv) Production Engg. (v) Textile Technology.
Shri G.S. Institute of Technology and Science, Indore – 452003
(i) Electrical Engg.
Shri Jayachamarajendra College of Engineering, Mysore 570006
(i) Civil Engg. (ii) Industrial Electronics (iii) Instrumentation Tech.
(iv) Mechanical Engg.
University of Visveswaraya College of Engineering, Bangalore – 560056
(i) Civil Engg.
Visvesvaraya National Institute of Technology, Nagpur – 440011
(i) Civil Engg.
(ii) Electrical Engg.
Code
WR
PS
GS
SJ
UV
VR
III. CODE FOR DEPARTMENTS OFFERING ADMISSION TO MASTER’S DEGREE
PROGRAMMES UNDER QIP AT VARIOUS INSTITUTIONS
Department
Code Institution(s) Offering
Aerospace Engineering
Agriculture & Food Engineering
Alternate Hydro Energy Centre
Applied Mechanics
Architecture & Planning
Architecture & Regional Planning
Biomedical Engineering
Biotechnology
Chemical Engineering
Civil Engineering
AE
AG
AH
AM
AR
AP
BM
BT
CH
CE
Computational Science
Computer Engineering
Computer Science & Engineering
Corrosion Science & Engineering
Cryogenic Engineering
Earthquake Engineering
Electrical & Electronics Engineering
Electrical Engineering
CP
CS
CS
CO
CR
EQ
EE
EE
Electronics & Communication Engineering
Electronics & Communication
Electronics & Computer Engineering
Electronics & Electrical (Telecomm. Engg.)
Electronics Design & Technology
Electronics Engg.
Energy Studies
Energy Systems Engg.
EC
IL
LC
EC
ED
EC
EN
EN
Quality Improvement Programme - Sponsored by AICTE
BG, BM, KH, KN, MD*
KH*
RR
DL, MD*, MN, SK*
RR
KH
BM
KH, BM
BG, BM, DL, KH, KN, MD*, RR, AU, SK*, GW
BG*, BM*, DL*, KH*, KN*, MD*, RR*, AU, BE,
CL*, MN, WR, UV, VR, SK*, RK, TR*, SJ, GW*
BG
CL*, SK
BG, BM, DL, KH, KN, MD*, MN, PS, TR, GW
BM
KH
RR
AU, PS, SK*, TR*
BG, BM*, DL, KH*, KN, MD*, RR, BE, CL*,
GS, JU, VR, MN, WR, AU
BG, GW, SK*, WR
SJ
RR
KH*, JU*
BG
MN, CL*
DL
BM
3
Department
Code Institution(s) Offering
Environmental Engg. & Management
Environmental Science & Engg.
Fuel and Mineral Engineering
Humanities
Humanities & Social Sciences
High Voltage Engineering
Hydrology
Industrial and Management Engineering
Industrial Engineering
Industrial Engineering & Management
Industrial Engg. & Operations Research
Industrial Tribology and Maintenance Engg
Information & Communication Engg.
Instrumentation Engineering
Instrumentation Tech.
Internet Science & Engg.
Laser Technology
Leather Technology
Management Studies
Materials & Metallurgical Engineering
Material Science
Mathematics
Mathematical & Computational Sciences
Mechanical Engineering
EM
EV
FM
HU
HS
HV
HY
IM
IE
IM
IO
IT
IC
IN
IN
IS
LS
LT
MG
MT
MS
MA
MC
ME
Mechanical & Industrial Engineering
Metallurgical & Materials Engineering
Metallurgical Engineering
Metallurgical Engg. & Materials Science
Microelectronic System
Mining Engineering
Nuclear Engg. & Technology
Ocean Engineering
Physics
Physics & Meteorology
Polymer Science & Engineering
Production Engineering
Reliability Engineering
Rubber Technology
Signal Processing
Systems & Control Engineering
Systems Science and Automation
Textile Technology
Water Resources Development
ME
MT
MT
MM
MI
MI
NE
OE
PH
PH
PS
PE
RE
RT
SP
SC
SA
TX
WR
KN
BM
IS
SK
KH
BG
RR
KN
NI
KH*
BM
DL
AU
BG
SJ
BG
KN
AU
KH
KN
KH, KN
DL, KH
SK*
BG, BM*, DL, KH*, KN, MD*, GW*, CL*, JU*,
MN, PS, RK*, TR*, WR, SJ, SK*
RR
KH, RR, MD, SK*
BG, MD, VN, SK, TR
BM*
BG
KH, IS, VN
KN
KH, MD*
DL, KH*, MD*
KH*
DL
JU*, PS, TR*
BM
KH
BG
BM
BG
DL, PS
RR
*Specializations have to be indicated while opting for the particular department. Code Nos. for the
specializations are given along with the details for the institution in Section XV.
4
Quality Improvement Programme - Sponsored by AICTE
IV. ELIGIBILITY CONDITIONS
1.
Only full time regular/permanent faculty members of degree-level engineering
institutions approved by AICTE and full time regular/permanent faculty
members of NITTTRs are eligible to apply. Adhoc/contract or part-time teachers
will not be considered. Admissions to Master’s degree programme under QIP are
open only to candidates with a basic Engineering or Technology
Degree/Architecture or such other qualifications.
2.
The candidates should have a minimum of two-years teaching experience as on
15-10-2004 at degree-level technical institutions.
3.
Computer Programmers, Systems Programmers, Workshop Staff, Guest Lecturers,
Visiting Lecturers, Teaching Assistants, Ad-hoc appointees, Technical Assistants
and other such categories of staff are not eligible.
4.
Faculty members of the major QIP Centers are not eligible.
5.
Faculty members of the Departments of other institutions (minor centers)
recognized for admission under QIP are also not eligible.
6.
The candidate should satisfy the minimum eligibility criteria prescribed by the
individual Department (and/or the Institution) to which admission is sought.
V.
CONDITIONS FOR ADMISSION
1.
Admission is possible only to the Institutions and the Departments listed in the
Information brochure.
2.
The final admission of the candidate will be subject to the clearance and approval
by the Admissions Wing (Section) of the concerned institution as per its rules and
regulations in force at the time of admission.
3.
The candidate, if selected, should be relieved to join the programme in time for the
session to which he/she is admitted.
4.
The candidate joining the Master’s degree programme under QIP on deputation
would be entitled to receive his/her salary and allowances, which must be paid by
the parent institution sponsoring him/her.
5.
Conditional recommendation by the Principal/Head of the Institution will not
be accepted.
6.
The Principal/Head of the Institution of a candidate who is selected for admission
should ensure that sponsorship certificate is produced by the candidate at the time
he/she joins the course.
VI. DESIGNATION CODES
Designation
Assistant Lecturer
Associate Lecturer
Lecturer
Code
01
02
03
Designation
Senior Lecturer
Reader
Assistant Professor
Code
04
05
06
Designation
Associate Professor
Professor
*Other Designation
Code
07
08
09
*Candidate should specify designation in all forms, failing which his/her application cannot be
considered in any case.
VII. APPLICATION FEE
Single DD on State Bank of India of Rs 500/- for General Category and Rs. 250/- for
SC/ST candidates drawn in favour of ‘IIT Kharagpur’ payable at Kharagpur to be
Quality Improvement Programme - Sponsored by AICTE
5
attached with the form marked as, Copy for Principal Coordinator on top of the form
only. Candidate should write their name, address and course applying on back side of
the DD. Candidate should note that the fee paid other than DD i.e., by IPO, cheques, etc.
are not acceptable. Application fee once paid cannot be refunded to the candidate in any
case.
VIII. LAST DATE
Application Forms including the Copy for Principal Coordinator, with its enclosures,
complete in all respect should reach the office of Principal Coordinator, IIT Kharagpur
on or before 15th October 2004. Applications received after this date will not be
considered.
IX. ENCLOSURES
1.
2.
3.
4.
X.
6
DD of Rs. 500/- for general Category and Rs. 250/- for SC/ST candidates (see
Section VII).
Enclose attested copies of the corresponding certificates for the following items in
the application form:
(i) Item # 7
Teaching Experience
(ii) Item # 8
Academic Data
(iii) Item # 8A & 9 Any other qualifications.
(iv) Item # 10
Short Term Courses
(v) Item # 11
Research Papers
(vi) Item # 12
Industrial and Research Experience
For Items # 8 and 8A please enclose attested copies of qualifying degree certificates
and mark sheets clearly showing total marks obtained out of maximum marks
semester-wise or year-wise.
Candidates belonging to SC, ST or OBC category, must attach an attested copy of
the caste certificate issued by a competent authority as per the Government of
India rules.
Physically Challenged candidates must attach a copy of the certificate issued by a
competent authority as per Government of India rules.
INSTRUCTIONS FOR COMPLETING THE APPLICATION
1.
Application forms must be type written or hand written clearly and legibly with a
ball point pen in BLOCK LETTERS. Enough space should be kept in between the
words for better understanding.
2.
You should enter all required information in all items in the Application Forms
and the Data Sheet completely, clearly and legibly.
3.
Candidate should attach required enclosures (see Section IX) with all application
forms.
4.
In Item #6 of the application forms and Item 5 of the Data Sheet, enter date of birth
and age in numbers, gender as ‘M’ or ‘F’, the category you belong to by GEN, SC,
ST or OBC, please put ‘Y’ if you belong to Physically Challenged category and ‘N’
if you do not and Married as ‘Y’ if you are married and ‘N’ if you are single. Please
Quality Improvement Programme - Sponsored by AICTE
5.
6.
attach an attested copy of the caste and/or handicap certificate in prescribed
format and issued by a competent authority as per Government of India Rules.
For filling Item 8, if the absolute marks are awarded, then fill, e.g. 650/800 where
marks obtained are 650 out of total of 800. If the Grade Point Average (GPA) is
awarded, fill, e.g. 6.7/10 where 6.7 is GPA obtained out of a scale of 10. If the
candidate has failed in any subject during any semester examination and cleared
that subject in a later semester, the marks obtained in that subject should be added
back to the semester in which it was supposed to have been cleared and then the
total marks calculated. Candidate should take only marks of those semisters,
which are considered for their final class/division for calculating the overall
percentage or CGPA.
A candidate can apply to a maximum of three institutions and a maximum of
two departments in each of them.
If a candidate intends to apply to all three institutions and two departments in
each of them, then the candidate needs to fill in seven copies of application forms
(six plus one additional application form to be retained by the office of the
Principal QIP Coordinator).
The following Table indicates the number of application forms to be filled in and
the number of sets of enclosures required as related to the number of institutions
and departments a candidate proposes to apply to.
No. of institutions
chosen
1
1
2
2
2
3
3
3
3
7.
8.
Total No. of
departments chosen
1
2
2
3
4
3
4
5
6
No. of applications to be filled in and
no. of sets of enclosures required
2
3
3
4
5
4
5
6
7
For Item #11 of the Data Sheet, please read relevant particulars in the Information
Brochure carefully. Enter in the order of your preference, the codes of the
Institutions (maximum 3 permitted), and in each the codes of the Departments
(maximum 2 permitted), to which you wish to seek admission. The codes are
given in Sections II and III of this brochure. Candidate should note that some
Departments in some Institutions require the specialization to be mentioned. Such
institutions are marked with (*) in the Table of Codes in Section III of the
Information Brochure, and Section XV lists these specializations and their code
nos. for the particular department of the concerned Institution. Please enter the
appropriate code nos. in the blocks provided in Item # 11 of the Data Sheet.
Please indicate the code of each Institution, code of the Department therein of your
choice and the code of Specialization (if any) in the department in the blocks
provided on the top of the applications (maximum 6 application forms).
Quality Improvement Programme - Sponsored by AICTE
7
9.
10.
11.
12.
13.
14.
15.
Please indicate the Designation Code (see Section VI) and Designation (Item #2 of
Application Form). You should write designation, particularly for code #09
without fail.
Candidate should affix his/her recent stamp-size photograph in the space
provided on all Application Forms including Copy for Principal Coordinator.
In Item #14 of the Application Form (Principal Coordinator’s Copy), the space
provided for the Name of the Candidate at #(a), Teaching Experience at #(c)
must be filled in and to be duly signed by the Principal/head of the Institution
along with Office Seal.
Applications submitted without signatures of the candidate and the appropriate
authorities with seal, and/or without the required enclosures will automatically
be invalid.
Candidate should check carefully that requisite enclosures are enclosed (see
Section VI) with each Application Forms including Copy for Principal
Coordinator.
(a) The requisite number of completed application forms (see above Table in #6),
the data sheet, and the enclosures as per the check list given in the brochure (see
Section XI) should be sent together with the requisite number of sets of enclosures
to:
DEAN, CE & PRINCIPAL QIP COORDINATOR
Continuing Education Programme
Indian Institute of Technology Kharagpur
Kharagpur – 721 302
preferably by Speed Post or Courier Service, to reach the Office on or before
October 15, 2004. Applications received after this date will not be considered.
(b) All the completed forms along with enclosures (see Section IX) should be sent
only to the Principal QIP Coordinator.
(c) Required stamps (Rs.6/-) should be affixed to the Acknowledgement Card
enclosed with the set of application forms. Self addressed Postcard (purchased
from the Post-office) may also be used as Acknowledgement Card. The
Application Number will be intimated through the acknowledgement card.
(d) Before mailing the completed forms, please ensure that each copy of
application form and its enclosures are properly fastened with a tag separately
at the left-hand top corner.
In case, your applications are submitted by your sponsor, it is your responsibility
to ensure that the applications are forwarded to the Office of the Principal QIP
Coordinator well within time so as to reach on or before October 15, 2004.
Applications received after this date will not be considered.
XI. CHECKLIST FOR EACH COPY OF THE APPLICATION FORM (including the
Principal QIP Coordinator’s Copy)
!
8
In Item #14 of Copy for Principal Coordinator Form candidate should check
his/her Name, years and months of experience; signature, date and office seal.
Quality Improvement Programme - Sponsored by AICTE
!
!
!
!
!
Enclose attested copies of
o The prescribed Caste Certificate (if you belong to SC/ST/OBC category).
o The prescribed Certificate if you belong to Physically Challenged category.
o Certificates of the Qualifying Examination and other Degrees.
o Age proofing Certificate.
o Mark Lists of all years/semesters of qualifying examination.
o Teaching/Industrial/Research Experience Certificate.
o The relevant certificates of Short Term Courses attended.
o Each Research Publication.
Application Fee : D.D. for Rs.500/- for General Category and Rs.250/- for SC/ST
candidates (see Section VII) should be enclosed with Copy for Principal
Coordinator form only.
Photographs : Affix recent stamp size photographs at the space provided on all
Application Forms including Copy for Principal Coordinator.
Signatures of the Applicant : At two places on copy of Principal Coordinator’s
Application Form including Data Sheet, and one each on each of the Application
Forms.
Candidate should ensure all information is properly filled in all Application Forms
before sending them to the Principal QIP Coordinator.
The Completed application must reach the following address by 15th October 2004 :
DEAN, CE & PRINCIPAL QIP COORDINATOR
Continuing Education Programme
Indian Institute of Technology Kharagpur
Kharagpur – 721302
XII. SCHOLARSHIP AND CONTINGENCY GRANT
The candidates admitted for the Master’s degree programme under QIP will receive a
scholarship of Rs. 2,500/- per month and a contingency grant of Rs. 3,000/- per annum.
XIII. PROCEDURE FOR ADMISSIONS UNDER QIP
1. Short-listing of the candidates will be done first by the office of the Principal
Coordinator then finally at the Department/Institute concerned. Interview letters
will be sent to the short-listed candidates by the Department/Institute concerned.
2. Interviews will be conducted in the Departments at the individual Institutions.
Schedule of interviews is given in Section XV of this Information Brochure. Please
note that no TA/DA will be paid for attending the interviews.
3. Selections will be made by the National QIP Coordination Committee based on the
recommendations of the various institutions.
4. Final Results will be displayed in the web site www.iitkgp.ernet.in
5. Admission letters will be issued to the selected candidates by the respective QIP
Centres of the institutions offering admission.
Quality Improvement Programme - Sponsored by AICTE
9
XIV. SCHEDULE OF INTERVIEWS FOR ADMISSION TO MASTER’S DEGREE
PROGRAMMES UNDER QIP FOR 2005 –2006
The following dates of interview at various QIP Centers, finalized by National QIP
Coordination Committee, are final and cannot be altered under any circumstances.
SNo
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Institute
IIT Roorkee
Indian School of Mines, Dhanbad
IIT Kanpur
IIT Delhi
Institute of Technology, BHU, Varanasi
Motilal Nehru National Institute of Technology, Allahabad
Bengal Engineering College, Howrah
Jadavpur University, Calcutta
IIT Guwahati
IIT Kharagpur
National Institute of Technology, Rourkela
SGS Institute of Technology & Science, Indore
Visvesvaraya National Institute of Technology, Nagpur
National Institute of Industrial Engg. Mumbai
IIT Bombay
National Institute of Technology, Warangal
National Institute of Technology Karnataka, Surathkal
PSG College of Technology, Coimbatore
SJ College of Engineering, Mysore
UVCE, Bangalore
IISc Bangalore
Anna University, Chennai
IIT Madras
National Institute of Technology, Calicut
National Institute of Technology, Tiruchirappalli
Interview
Date
03-01-2005
05-01-2005
06-01-2005
10-01-2005
12-01-2005
12-01-2005
14-01-2005
17-01-2005
20-01-2005
25-01-2005
27-01-2005
28-01-2005
31-01-2005
01-02-2005
02-02-2005
03-02-2005
07-02-2005
08-02-2005
09-02-2005
10-02-2005
11-02-2005
14-02-2005
15-02-2005
16-02-2005
17-02-2005
Day
Monday
Wednesday
Thursday
Monday
Wednesday
Wednesday
Friday
Monday
Thursday
Tuesday
Thursday
Friday
Monday
Tuesday
Wednesday
Thursday
Monday
Tuesday
Wednesday
Thursday
Friday
Monday
Tuesday
Wednesday
Thursday
XV. DEPARTMENTS & FIELDS OF SPECIALIZATION AT VARIOUS INSTITUTIONS
10
!
The departments offering admission to Master’s degree (2 years course) programmes
at various institutions and the fields of specialization in the departments are listed in
the Tables given below.
!
Specializations mentioned indicate only areas of interest, and are not exhaustive.
There may not be admissions open to all the areas indicated, and candidates if found
suitable, may be admitted to related areas also.
!
The details given are subject to variation and change from time to time and only
those operating in the respective institutions at the time of actual admissions are
applicable. Candidates desirous of more information such as for accommodation, fee
structure etc. may write/contact to the QIP Coordinator of individual institution.
Quality Improvement Programme - Sponsored by AICTE
1
INDIAN INSTITUTE OF SCIENCE, BANGALORE - 560012 CODE: BG
In all cases, the minimum eligibility is Second class or equivalent grade in the qualifying examination or Bachelor’s degree in Science
with Physics and Mathematics in the curriculum followed by the professional Diploma as relevant to individual departments.
Master of Engineering : (Duration 2 years)
S No
1.1
Department
Aerospace
Engineering
Code
AE
1.2
Chemical
Engineering
CH
1.3
Civil Engg.**
CE
1.4
Computer Science
and Engineering
CS
1.5
Systems Science
and Automation
(Jointly conducted
by department of
Electrical Engg. &
Computer Science
and Automation)
SA
Quality Improvement Programme - Sponsored by AICTE
Fields of Specialization
Structures, Aerodynamics, Propulsion, Control
Guidance of Aircraft, Rockets and Spacecraft.
Minimum Qualification
and BE/B.Tech. or equivalent degree in
Aeronautical, Chemical, Civil, Mechanical
Engg.,
Electrical,
Electronics,
OR
Communication or B.Sc. or equivalent degree
followed by AMIE/ AMAeSI/ AMIIChE/
IETE, GRAD
Chemical Reaction Engg., Thermodynamics, Transfer BE/B.Tech or equivalent degree in Chemical
Processes in Multiple Systems, Fluid Mechanics, Engg.
Optimization, Emulsions, Colloids,
and Suspensions; or
Granular Flow; Molecular Simulations, Polymer Science B.Sc. or equivalent degree with Mathematics
as one of the subjects followed by AMIE in
and Engg.; Supercritical Extraction; Biochemical Engg.
Chemical Engg., or AMIIChE
Geotechnical Engg.
Code:08
BE/BTech or equivalent degree in Civil Engg.
or B.Sc. or equivalent degree followed by
Hydromechanics and water Resources Engg.
Code:11
AMIE in Civil Engg.
**Each of the 3 specialization conducted by
Structural Engg.
Code:17
Civil Engg. deptt. would constitute a separate
preference.
Theoretical Computer Science, Systems Software, Software BE/B.Tech. or equivalent degree in Computer
Engg., Computer Architecture, Parallel and Distributed Sc./Engg(CS), Information Technology(CS),
or
Communication,
Computing, Artificial Intelligence and Machine Learning, Electronics(EC)
Mechanical and allied disciplines(EC); OR
Manufacturing Systems.
B.Sc. or equivalent degree followed by AMIE
in Electronics and Communication(EC) or
GRAD, IETE(EC)
Signal Processing, Artificial Intelligence, Neural Networks, BE/B.Tech. or equivalent degree in Computer
Manufacturing Systems, Robotics, Computer Vision, Science/ Engg., Electrical, Electronics,
Decision, Control Theory and Real Time Systems.
Communication,
Instrumentation,
Mechanical, Chemical or Aeronautical Engg.;
OR B.Sc. or equivalent degree followed by
AMIE in Electrical, Electronics and
Communication, Mechanical or Chemical
11
12
Information Brochure for Admission to M.Tech under QIP 2005-2006
1.6
Electrical
Communication
Engineering
EC
Communications,
Microelectronics,
Networking, Photonics, Signal Processing.
Microwaves,
1.7
Electrical
Engineering
EE
Computer Application in Power Systems and Drives.
1.8
High Voltage
Engineering
HV
High Voltage Apparatus, EHV Transmission, Over Voltage
Phenomena, Protection, Electromagnetic
fields and
Insulation Engg. as relevant to HV Engineering.
1.9
Mechanical
Engineering
ME
1.10
Metallurgy
MT
Internal Combustion Engines and Technical Acoustics;
Metal Casting and Manufacturing, Mechanical Systems
Analysis and Design; Thermal Science and Energy Systems
Engg.
Physical Metallurgy, Mechanical Metallurgy, Chemical
Metallurgy, Extractive Metallurgy, Materials Processing,
Alloy Design, Ceramics, Composites and Modeling.
1.11
Microeletronic
System
(Jointly conducted
by, Electrical
Communication
Engg. & Centre for
Electronics design
& Technology)
MI
CAD VLSI Gate Arrays ASICs Switching Theory & VLSI
Circuits, Mixed Mode VLSI Circuits.
Engg., GRAD.IETE, AMIChE, AMAeSI.
Candidates should have done a formal course
in Programming in Pascal or C language.
BE/B.Tech. or equivalent degree in
Electronics & Communication, Telecommunication., Electronics or Electrical Engg. with
specialization
in
Electronics
&
Communication, OR B.Sc. or equivalent
degree followed by GRAD. IETE, AMIE in
Electronics & Communication or Wireless
Communication.
BE/B.Tech. or equivalent degree in Electrical,
or Electrical and Electronics or Electronics
and communication or B.Sc. or equivalent
degree followed by AMIE in Electrical or
Electronics & Communication Engg./ GRAD.
IETE.
BE/B.Tech or equivalent degree in Electrical
Engg.
OR
B.Sc. or equivalent degree followed by AMIE
in Electrical Engg. or AMIEE.
BE/B.Tech or equivalent degree in
Mechanical Engg. or B.Sc. equivalent degree
with Mathematics followed by AMIE in
Mechanical Engg., or AMIMechE(I)
BE/B.Tech or equivalent degree in
Metallurgy, or B.Sc. or equivalent degree with
Mathematics, Physics & Chemistry followed
by AMIE in Metallurgical Engg. or AMIIM.
BE/B.Tech or equivalent degree in Electrical,
Electronics and Communication, Computer
Science, Instrumentation with Electronics
OR
B.Sc or equivalent degree followed by
AMIETE or AMIE in Electronics and
Communication.
1.12
Signal Processing
SP
(Jointly conducted by
Elect. Engg & Electrical
Communication Engg.)
1.13
Internet Sc. & Engg
(Computer Science
Automation)
IS
BE/B.Tech. or equivalent degree in Electrical,
Electronics and Communication or Computer
Science OR B.Sc. or equivalent degree
followed by GRAD. IETE or AMIE in
Electrical or Electronics and Communication.
Internet Technologies, Electronic Commerce, Computer and BE/B.Tech. or equivalent degree in Computer
Communication
Networks,
Software
Architecture, Science/ Engineering (CS), Information
Operating Systems.
Technology (IT), Electronics, Communication
(EC) or Mechanical and allied disciplines
(ME) OR B.Sc. or equivalent degree followed
by AMIE in Electronics and Communication
(EC) or Mechanical (ME) or GRAD.
IETE.(EC)
Digital Signal processing, Image Processing, Signal
Compression, Neural Networks, Biomedical Signal
Processing Speech info. Processing, Array Processing,
Pattern Recognition.
M. Tech. Degree Programs (Duration- 2 yrs)
1.14
Electronics Design
and Technology
(Centre for
Electronics Design
and Technology)
ED
1.15
Instrumentation
IN
1.16
Computational
Science
(Supercomputer
Education &
Research Centre)
CP
Quality Improvement Programme - Sponsored by AICTE
Computer Networks, Embedded Systems, Power BE/B.Tech. or equivalent degree in
Conversion, VLSI Design, Electronic Packaging, Electronics as one of the subject or B.Sc. or
Instrumentation.
equivalent followed by AMIE a relevant area
of specialization OR M.Sc. in Physics with
Electronics as the special subject. (M.Sc.
degree or equivalent degree holders should
possess 2 years experience in Electronic
Hardware)
Analytical Instrumentation, Electronic Instrumentation, M.Sc. or equivalent degree in Instrumentation
Lasers and Optical Instrumentation, Solar Energy and OR BE/B.Tech. OR equivalent degree in
Thermal Instrumentation, Vacuum and Thin Film Instrumentation/ Instrumentation & Control
Techniques.
Engineering/ Electronics & Instrumentation.
Multi-disciplinary program addressing Super-conducting BE/B.Tech. or equivalent degree in any
(actually this should have been supercomputing), Parallel discipline OR M.Sc. or equivalent degree in
and Distributed Computing, Computational issues in large Mathematics, Physics or Statistics OR M.Sc.
or equivalent degree in Chemistry or in any
scale problem solving,
Simulation in Science and Engg., Numerical Techniques and branch of Biology with Mathematics as a
Algorithms, Data Management and Scientific Visualization. subject at the B.Sc. or equivalent level OR
B.Sc. or equivalent degree followed by
AMRAeS/AMIMarE/AMIME/AMIEE/AMRI
NA/AMBCS.
In all cases proficiency in programming is a
pre-requisite.
13
14
Information Brochure for Admission to M.Tech under QIP 2005-2006
2
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY, MUMBAI - 400076 CODE: BM
In all cases, the minimum eligibility is a Degree in Engineering with a minimum of 55% marks or an equivalent grade.
S. No.
2.1
Department
Aerospace
Engineering
Code
AE
2.2
Chemical
Engineering
CH
2.3
Civil Engineering
(code no. of the
specialization to be
CE
Fields of Specialization
Aerodynamics
Code:01
Dynamics and Control
Code:02
Aerospace Propulsion
Code:03
Aerospace Structures
Code:04
Systems Design and Engineering
Code:05
Research Areas:
Process Control, Process Simulation, Optimization,
Computer Aided Design, Process Integration, Energy
Conservation and Optimal Resource Management, Artificial
Intelligence, Mathematical Modelling.
Biochemical Engineering and Food Process Engineering,
Metabolic Engineering, Applied Enzymology, Bioseparations
Drug Discovery, Vermiculture, Waste Management,
Pollution Control and Environmental Engineering.
Interface Engineering and Science, Colloids, Sol-gels,
Emulsions,
Foams,
Nanoparticles,
Microstructural
Engineering, Aerosals, Microscopy.
Reaction Engineering, Catalysis, Multiphase Reactions,
Microreactors.
Polymer Materials, Polymer Reaction Engineering,
Polyurethanes, Rubber, Polymer Rheology, Ceramic
Materials.
Petroleum Refining, Oil Field Processes and Operations
Petrochemicals, Process Development.
Membrane Separations, Pressure Swing Adsorption,
Supercritical
Extraction,
Bioseparations,
Polymer
Adsorption, Distillation, Thermodynamics.
Multiphase Systems, Fluidization, Granular Flow, Powder
mixing.
Transportation Systems Engg.
Code:01
Geotechnical Engg.
Code:02
Water Resources Systems Engg.
Code:03
Minimum Qualification
Bachelor’s
degree
in
Aerospace,
Mechanical, Civil, Electrical/ Electronics
OR its equivalent.
Bachelor's degree in Chemical Engg., OR
equivalent.
Bachelor's Degree
equivalent.
in
Civil
Engg.
or
indicated in
data sheet)
Structural Engg.
Offshore Engg.
Remote Sensing.
the
2.4
Computer Science
and Engineering
CS
2.5
Electrical
Engineering
EE
2.6
Mechanical
Engineering
ME
2.7
Metallurgical
Engg. and
Materials Science
MM
2.8. Inter-disciplinary Programme
(a)
Biomedical
BM
Engineering
Quality Improvement Programme - Sponsored by AICTE
Code:04
Code:05
Code:06
Communication Engg.
Microelectronics
Power electronics and power systems
Control & Computing
Electronic systems.
Thermal and fluids Engg.
Code:01
Code:02
Code:03
Code:04
Code:05
Code:01
Design Engg.
Code:02
Manufacturing Engg.
Code:03
Materials Science & Engg.
Code:01
Process Metallurgy.
Code:02
Bioinstrumentation, Biomaterials & artificial organs,
Transducers & biomedical biosensors, Bioinformatique,
Telemedicine, Biomedical devices, Cancer Detection
Technology, Computers in biology & medicine, Ergonomics,
Haemorheology & biomedical fluid dynamics, Medical
image & signal analysis, Biostatistics & mathematical
modeling, Neuromuscular physiology.
B.E./B.Tech. in CS&E with First Class or,
MCA/BE/B.Tech in any branch with valid
CS GATE score. GATE score requirement is
waived in case of 2 years teaching
experience in CS & E.
Degree in Electrical Engg. with minimum of
60% marks/1st class or equivalent.
First class degree in Mech./ Aero/ Aerospace
Engg./ Automobile Engg.
First class degree in Mechanical Engg./
Production /Automobile Engg. /M/c Tool
Engg.
First class degree in Mech./Prod./M/c Tool /
Industrial Engg.
Degree in Ceramic, Chemical, Electrical,
Electronics, Electro- chemical, Mechanical,
Metallurgical, Engineering Physics or M.Sc.
in Chemistry, Physics or Material Science.
Degree in Chemical, Electrochemical,
Metallurgical, Mech., Material Science.
(i) B.Tech/B.E in Biomedical, Chemical
Computer Science, Electrical, Electronics,
Telecommunications,
Instrumentation,
Mechanical Engg., and Engineering Physics.
(ii) M.Sc. or equivalent in Biochemistry,
Biophysics,
Biotechnology,
Ceramics,
Chemistry,
electronics,
Ergonomics,
Materials Sc., Mathematics, Molecular
Biology, Physics and Physiology.
(iii) M.B.B.S
15
Information Brochure for Admission to M.Tech under QIP 2005-2006
16
(iv) M.Pharm.
Applicants desiring Institute financial
support should have cleared GATE (for
engineering and science graduates) or
AIIMS/ MCI/ JIPMER/PGI-Chandigarh/
AFMC-Pune post graduate entrance
examinations. Eligibility/ rank certificates
are required for all such entrance
examinations.
(b)
Corrosion Science
and Engineering
Energy Systems
Engineering
CO
(d)
Environmental
Science and
Engineering
EV
(e)
Industrial
Engineering and
Operations
Research
IO
(c)
EN
Energy Conservation, Energy Systems Modeling, Simulation
and Optimisation, Demand Side Management, Generation
and Transmission Planning, Solar Thermal & Photovoltaic
System, Wind Energy, Biomass Systems, IC Engines, Power
Systems, Batteries and Fuel Cell, Electrical Drives, Energy
Integration, Energy Efficiency, Cogeneration.
Environmental Monitoring, Industrial Air & Water Pollution
Control, Solid and Hazardous Waste Management, Air &
Water Quality Modeling, Environmental Systems
Optimization,
Environmental
Micro-biology
&
Biotechnology, Indoor Air Quality, Aerosol Science and
Technology, Environmental Impact Assessment and Global
Issues.
In general the group is interested in research related to:
Modeling, Quantitative Analysis and Optimization in
Manufacturing, Supply Chains, Transport, Service,
Infrastructure and other Industrial Systems; Application of
Quantitative Methods in Quality and Maintenance
Management Systems; Development and Applications of
Decision Support, Intelligent and Knowledge Based Systems.
The specific problems of interest include: Production
Planning, Scheduling and Control Systems, Management of
Inventories, Queues and Lead Times in Multi Echelon
Inventory Systems, Process Quality Management; Operation,
Planning and Control Related to CMS, MRP, Flexible
Assembly, FMS, JIT, Supply Chains and ERP; Facilities
Planning, OR Applications in Management of Technology
Degree in Aero., Automobile, Chemical,
Civil, Elect., Electronics, Energy Systems.,
Mech., Metallurgy or Thermal Power Engg.
Degree in Ceramics and Glass Tech.,
Chemical, Civil, Comp. Sc. & Engg., Energy
Systems, Mechanical Engg. Metallurgical
Engg., Mining, Production, Petrochemical
Engg.
Bachelor's degree in any branch of
Engineering with some exposure to
industrial engineering and operations
research are eligible to apply.
3
(f)
Systems & Control
Engineering
SC
(g)
Reliability
Engineering
RE
and Resource Allocation, Queuing Models of Manufacturing
Systems, Modeling and Simulation of Manufacturing and
Service Systems, Applied Stochastic Models, Scheduling and
Control of Transport Operations; Time Tabling and Crew
Scheduling; Neural Nets and Fuzzy Systems and their
Applications in Manufacturing and Management;
Quantitative Models for Financial Engineering.
Modeling & Simulation, Linear and Non-Linear Control,
Variable Structure Systems, Systems Identification, Robust
and Optimal Control, Aircraft Control System, Process
Control System, Robotic Control System, Fuzzy logic,
Neural Network Based Control System, Non-linear
Dynamics, Bifurcation & Chaos.
Bachelor's degree in Aerospace/Aero. Engg./
Chemical Engg, Communication, Elect.
Engg./ Electronics, Instrumentation/ Mech.
Engg./Met. Engg.
INDIAN INSTITUTE OF TECHNOLOGY DELHI, NEW DELHI, 110016 CODE: DL
M.Tech. Degree Programms
In all cases, the minimum eligibility is a Degree in Engineering/technology in the specified field with a minimum of 60% marks or
equivalent grade point average (as determined by IIT, Delhi)
S.No
Department
3.1 Applied Mechanics
3.2
Code
AM
Centre for Energy
Studies
Centre for Polymer
Sc. & Engineering
EN
3.4
Chemical Engg.
CH
3.5
Civil Engineering
(code no. of the
specialization to be
indicated in the data
sheet)
CE
3.3
Quality Improvement Programme - Sponsored by AICTE
PS
Fields of specialization
Engineering Mechanics, Design Engg.
Minimum Qualification
Aeronautical,
Civil,
Mechanical,
Metallurgical or Production Engg.
Energy studies Elect. Power Systems, Solar Energy, Plasma Electrical, or Mech. Engg., Civil,
Science & Tech., Fuel Technology.
Chemical, Agricultural Engg.
Polymer Science & Technology.
Bachelor of Technology in Chemical
Engg. in Polymer Sc. and Tech., Plastic &
Rubber Tech., Textile Tech., Mechanical
Engg; Master's in Chemistry, Physics.
All topics in Chemical Engineering, leading to Process Chemical Engg.
Engineering & design.
Construction Engg. & Management.
Code: 02 Civil Engg. or Architectural Engg.
Environmental Engg. and Management.
Code: 07 Civil Engg.
Rock Engg. and Underground Structures.
Code: 15 Civil or Mining Engg.
Geotechnical & Geoenvironment Engg.
Code: 16 Civil Engg.
Structural Engg.
Code: 17
Water Resources Engg.
Code: 22 Civil or Agricultural Engg.
17
18
Information Brochure for Admission to M.Tech under QIP 2005-2006
3.6
CS
Computer Science & Engg.
Computer Science
3.7
Computer Science and
Engineering
Electrical Engineering
EE
Communication Engg, Computer Technology, Control and
Automation, Electrical Machines and Devices, Integrated
Electronics and Circuits, Power Electronics Power Systems.
Opto-electronics and Optical Communications (Jointly run by
the Departments of Electrical Engineering and Physics)
3.8
ITMMEC
IT
Industrial Tribology and Maintenance Engg.
3.9
Mathematics
MA
Computer Applications.
3.10
Mechanical
Engineering
ME
Design of Mechanical Equipment.
Electrical Engg./ Electronics Engg./
Electronics & Communication Engg./
Computer Sc. & Engg., or Equivalent
Electrical Engg./ Electronics Engg./
Electronics & Communication Engg. or
M.Sc. (Physics)
Mechanical/ Agricultural/ Automo-bile/
Chemical/
Textile/
Industrial/
Manufacturing Science & Engg./ Marine/
Aeronautical Engg./ Mining/ Production
Engg.
Any branch of Engg., Master's degree in
Maths, Statistics, Physics, Meteorology
Aeronautical/ Agricultural/ Auto-mobile/
Mechanical/ Production/ Manufacturing
Science & Engg./ Textile Engg./
Technology.
Any Engg. Discipline
Aeronautical/
Agricultural/
Automobile/Industrial/Mechanical/
Metallurgy/
Production/
Manufacturing
Science & Engg./ Textile Engg./
Technology.
Aeronautical/ Automobile/ Chemical/
Food Engg. Technology/ Mechanical
Engg.
M.Sc. Physics or Electrical Engineering/
Electronics.
M.Sc. Physics with specialization in
Electronics
or
Electrical
Engg/
Electronics
Batchelor’s degree in Textile Engg./Tech.
Batchelor’s degree in Textile Engg./Tech.
or Textile Chemical Technology, Fibre
Technology, Chemical Engg..
Industrial Engg.
Production Engg.
Thermal Engg.
3.11
Physics
PH
Solid State Material, Applied Optics.
Optoelectronics and Optical Communications (Jointly run
with Dept. of Electrical Engg.)
3.12
Textile Technology
TX
Textile Engg.
Fiber Science Technology.
4
INDIAN INSTITUTE OF TECHNOLOGY GUWAHATI, GUWAHATI - 781039 CODE: GW
S.No Department
4.1 Chemical Engineering
5
Code
CH
Fields of specialization
Petroleum Refinery Engineering
4.2
Civil Engineering
CE
4.3
Computer Science &
Engineering
CS
Structural Engineering.
Code:01
Water Resources: Utilisation and Environmental Code:02
Management.
-
4.4
Electronics &
Communication Engg.
EC
Signal Processing.
4.5
Mechanical
Engineering
ME
Fluids and Thermal Engineering
Machine Design
Code:01
Code:02
Minimum Qualification
Bachelor degree in Chemical Engg/
Technology with minimum CPI of 6.5 or
60% marks.
Bachelor’s degree in Engineering/
Technology in an appropriate area with a
minimum CPI of 6.5/10 or 60% marks
Bachelor’s degree in Engineering/
Technology or equivalent in an
appropriate area or M.Sc. (Computer
Science/Information Technology) or
MCA from a recognized Institution with a
minimum CPI of 6.5/10 or 60% marks
Bachelor’s
degree
in
Electrical/
Electronics Engg. or Equivalent or
M.Sc.(Electronics) with a minimum CPI
of 6.5/10 or 60% marks
Bachelor’s degree in Engineering/
Technology in an appropriate area with a
minimum CPI of 6.5/10 or 60% marks
INDIAN INSTITUTE OF TECHNOLOGY KANPUR, KANPUR - 208016 CODE: KN
The minimum eligibility is Degree in engineering in the relevant field with high second class or equivalent, except where specified differently.
SNo
Department
Code
Fields of specialization
Minimum Qualification
5.1. Aerospace
AE
Aerodynamics, Flight Mechanics, Propulsion, Structures.
Degree
in
Aeronautical/
Aerospace,
Engineering
Mechanical, Civil, Chemical, or Naval
Architecture Engg.
5.2. Chemical Engineering
CH
Transport phenomena, Chemical Reaction Engg., Applied First class Degree in Chemical Engg. or
Kinetics and Catalysis, Thermodynamics, Membrane equivalent
Separation Processes, Process Systems Development,
Computer Aided Design, Optimization and Control,
Petroleum Engg., Pulp and Paper Tech., Polymer Science
and Engg., Environmental Pollution and Control,
Adsorption, Safety and Reliability, Dynamics of
Nonlinear Systems, Zeolite Catalysis, Colloids and
Interface Engg. CFD, Rheology, Non-Newtonian Fluid
Mechanics, Nanotechnology, Numerical Methods for
Quality Improvement Programme - Sponsored by AICTE
19
Information Brochure for Admission to M.Tech under QIP 2005-2006
5.3.
Civil Engineering
(code no. of the
specialization to be
indicated in the data
sheet)
CE
5.4.
Computer Science and
Engineering
CS
5.5.
Electrical Engineering
EE
20
engineers, Mathematical Methods in Chemical
Engineering, Modeling and Simulation in Chemical
Engineering, Bioinformatics, Modeling and Simulation of
Separation Processes.
Engineering Geosciences
Code:05
Bachelor’s Degree in Civil Engg. / M.Sc.
degree in Geology or Earth Sciences.
Geoinformatics.
Code:14
Bachelor’s degree in Civil Engg.
Geotechnical Engg.
Code:08
Transportation Systems Engg.
Code:20
Hydraulics & Water Resources Engg.
Code:11
Batchelor’s Degree in Agricultural/ Civil/
Mechanical Engg.
Structural Engg.
Code:17
Bachelor’s degree in Architecture/Civil Engg.
In all cases CPI of 5.5 (on 10.0 scale) in the
qualifying degree is essential (as long as it is
7 percentage point above the minimum
passing marks).
Software Engineering, Language Translation, Networks, Degree in Computer Science.
Databases Mobile Computing, Operating System
Architecture, VLSI, Computer Graphics and CAD Parallel
Processing, AI and Natural Language Processing,
Algorithms and Theoretical Computer Science.
Power and Control Systems (including Power Systems, Degree in Electrical or Electronics Engg. or
Power Electronics and Drives, High Voltage Engineering equivalent.
Control Systems, Robotics, Soft Computing, Quantum
Computing and Neural Networks), Information Systems
(including Information Theory, Mobile Communications,
Digital Signal, Speech and Image Processing, Computer
Vision, Coding Theory, Communication Networks,
Biomedical Signal Processing, Machine Translation, elearning), Microwaves and Photonics (including Antenna
Design, MMIC, RF Communication, Fiber Optic
Communication Systems and Sensors, Photonic Devices,
Integrated Optics, Optical Computing, Wireless Optical
Communication,
Fog
Vision
for
Railways),
Microelectronics, VLSI and Display Technology
(including Device Modeling and Characterization, VLSI
Design, Organic LED based displays, Microelectronic
Packaging, MEMS Design)
5.6.
Environmental Engg.
and Management
EM
5.7.
Industrial and
Management
Engineering
IM
5.8.
Laser Technology
LS
5.9.
Mechanical
Engineering
ME
5.10. Materials and
Metallurgical
Engineering
Quality Improvement Programme - Sponsored by AICTE
MT
Water Quality & Pollution, Resources Remediation,
A Bachelor's Degree in any branch of
Air Quality.
Engg./M.Sc. with Maths at 10 +2 level.
Pollution, Environmental Management.
Management Science and Information Systems Degree in any branch of Engg.
(Operations Research, Operations Management, Quality,
Supply Chain, Information Systems, Marketing Science,
Financial Engineering, Infrastructure Systems modeling).
Business Analysis (Marketing, Finance, Strategy,
Technology
Management,
Organization,
HRM,
Infrastructure Policy & Regulation)
Laser Spectroscopy, Nonlinear Optics, Laser Plasma,
Holography, Fiber Optic Communication, Raman
Spectroscopy, Optical Tomography Laser Fabrication,
Photonics, Laser Material Processing, Medical
Applications of Lasers.
Solid Mechanics & Design, Fluids and Thermal Science,
Manufacturing Science, Robotics and Robot Applications
Modeling and Simulation of Mineral Processes Systems,
Fluid Flow, Heat and Mass Transfer in Metallurgical
System, Process Design and Development in Extractive
Metallurgy, Simulation of Metallurgical Processes, Steel
Making, Metallurgical Process Control and Process
Optimization in Iron and Steel making, Applications of
Artificial Intelligence Methods in Metallurgical Processes,
Electrometallurgy, Electrochemical Cleaning of Soil,
Aluminum Electrolysis, Electrodeposition, Physical
Metallurgy, Alloy Development, Thermodynamics and
Kinetics of Phase Transformations, Heat Treatment,
Solidification of Metals and Alloys, Interfacial Processes,
Mechanical Processing, Thermomechanical Processing of
Steels and Titanium Alloys, Processing-Structure-Property
Relations in Materials, Intermetallics, Nanostructural
Materials,
Microstructural
Characterization
and
Stereology, Electron Microscopy, Evolution and
Characterization of Textures During processing
Environmental Degradation of Materials, Materials
Degree in any branch of Engg., preferably in
Electronics & Communications, Electrical
Engg, or Mechanical Engg. or M.Sc. Physics.
First class Degree in Mechanical Engg.
Note: Candidates with first class Degree in
Production Engg. are eligible for admission
only to Robotics & Robot Applications or
Manufacturing Science.
Degree in Ceramic, Chemical, Materials,
Mechanical, Metallurgy or a M.Sc. degree in
Chemistry, Material Science or Physics with
Mathematics at the B.Sc. level.
21
22
Information Brochure for Admission to M.Tech under QIP 2005-2006
5.11. Material Science
(Interdisciplinary
programme)
MS
5.12. Nuclear Engg. &
Technology
NE
6
Hydrogen Interaction, Processing of Powders and
Particles Discrete Element Method (DEM), Powder
Metallurgical Processing, Modeling of P/M Processes,
Solid State and Liquid Phase Sintering, Structural
Ceramics Composite Materials, Metal Matrix Composites,
Tribology of Advanced Materials, Welding Processes,
Magnetic Materials, Electromagnetic Materials and
Processing, Thin Film Technology, Characterization and
Applications of Opto-Electronic Materials and Devices,
Materials Processing by Solid State Chemistry,
Ferroelectric Ceramics, Electronic Materials, White Light
Illumination, Display Materials and Technologies.
! Electronic and Optoelectronic Materials /Devices.
! Advanced ceramics and composites.
! Nanoscale materials and processes, Carbon nanotubes.
! Energy storage/ conversion materials.
! Superionic/Fast-ion conductors, solid electrolytes.
! Polymeric Materials Polymer-bonded magnets.
! Thin films.
! Magnetic materials.
! Organic & Polymeric Semiconductors/ Devices.
Computerized Tomography, Reactor Dynamics, Transport
Theory, Thermal Fluids Analysis, Instrumentation
1st Class B.Tech./B.E./B.Sc. (Engg.) degree in
Ceramic, Chemical, Electrical, Electronics
and Communication, Materials, Mechanical,
or Metallurgical Engineering/Technology; or
any equivalent branch of engineering/
technology or 1st Class Master's degree. in
Physics, Applied Physics, Chemistry,
Materials Science with Mathematics and
Physics or Chemistry at Bachelor's level.
Degree in any branch of Engg.
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR, KHARAGPUR - 721302 CODE: KH
In all cases the minimum eligibility is Degree in engineering with a minimum of 60% marks or equivalent
SNo
6.1.
6.2.
Department
Aerospace
Engineering
Agricultural and
Food
Engineering
Code
AE
AG
Fields of specialization
Aerospace Engg.
Farm Machinery & Power.
Soil and Water Conservation Engg.
Dairy and Food Engg.
Water Resources Development & Mgmt.
Aquacultural Engg.
Agricultural Systems & Management.
Post Harvest Engg.
Code:01
Code:02
Code:03
Code:05
Code:06
Code:07
Code:08
Minimum Qualification
Degree in Aerospace, Civil, Mechanical,
Marine Engg./Naval Architecture Engg.
Degree in Agricultural (All Specializations),
Biochemical (03), Chemical (06, 08), Civil
(02, 05, 06), Food Technology (03), Marine
(06), Mechanical Engg. (01, 03, 08),
Chemical Technology (06, 08).
6.3.
Biotechnology
BT
Biotechnology and Biochemical Engg.
6.4.
Civil
Engineering
(Code no. of the
specialization to
be indicated in
the data sheet)
CE
Water Resources Engg.
Code:01
Transportation Engg.
Environmental Engineering & Management
Code:02
Code:03
Code:04
Code:05
6.5.
Chemical
Engineering
CH
Geotechnical Engg.
Structural Engg.
Chemical Engg.
6.6.
Cryogenic
CR
Cryogenic Engg.
6.7.
Computer
Science and
Engineering
Electronics and
Electrical
Communication Engineering
CS
Computer Science & Engineering.
EC
Code:01
Code:03
Code:04
Code:05
Code:06
Code:01
Code:02
Code:03
Code:04
Code: IM
6.8.
6.10. Humanities &
Social Sciences
HS
Automation and Computer Vision.
Fibre Optic & Lightwave Engg.
Micro Electronics & VLSI Design.
R F & Microwave Engg.
Telecommunication System Engg.
Machine Drives and Power Electronics.
Control System Engg.
Power System Engg.
Instrumentation.
Human Resources Development and Management.
6.11. Industrial
IM
Industrial Engg. & Management.
6.9.
Electrical
Engineering
Quality Improvement Programme - Sponsored by AICTE
EE
Degree
in
Agricultural/Biochemical/
Chemical
Engg.,
Food
Technology,
Biotechnology.
Degree in Civil Engg. or Agricultural & Food
Engg or M.Sc. in Geology
Degree in Civil Engg.
Degree in Civil Engg./Environmental
Engg./Chemical Engg.
Degree in Civil Engg.
Bachelor degree in Chemical, Biochemical
Engg., Biotechnology, Civil, Mechanical,
Metallurgical, Mining, Food Technology,
Agricultural & Food Engg.
Degree in Chemical, Electrical, Mechanical,
or Metallurgical Engg., or, M.Sc. in Physics
or Materials Science.
Degree in Computer Science & Engg.
Degree
in
Electronics
and
Elect.
Communication Engg. (All Specializations),
Electrical Engg. (01).
Degree in Electrical (All specialize-tions),
Electronics and Elect. Communication (02,
04), Instrumentation (02, 04) Engg.
Degree in Aerospace, Agricultural, Chemical,
Civil,
Computer
Science,
Electrical,
Electronics & Elect. Communication, Energy,
Industrial,
Instrumentation,
Marine,
Mechanical, Metallurgical, Mining, Naval
Architecture, Production Engg., or in Engg.
Physics, or in Ceramic & Glass, Chemical,
Food, Food & Fermentation, Materials,
Plastics, Rubber, Polymer, or Textile Tech.
Degree in Aerospace, Agricultural (IM only),
23
Information Brochure for Admission to M.Tech under QIP 2005-2006
Engineering &
Management
Reliability & Quality Engg.
6.12. Mathematics
MA
Computer Sc. & Data processing.
6.13. Mechanical
Engineering
ME
6.14. Mining Engg.
6.15. Materials
Science
MI
MS
Manufacturing Process Engg.
Thermal, Energy & Environmental Engg.
Mechanical Systems Design.
Manufacturing Systems Design.
Mechanical Handling and Automation.
Precision & Quality Engg.
Mechanical Systems, Dynamics & Control.
Mining Engg.
Materials Science & Engg.
6.16. Metallurgical
and Materials
Engineering
6.17. Ocean Engg. &
Naval
Architecture
6.18. Physics &
Meteorology
MT
Metallurgical Engg.
OE
Ocean Engg. & Naval Architecture.
PH
Atmospheric Science & Tech.
(may not be offered).
Solid State Technology.
6.19. Rubber
RT
Rubber Technology.
24
Code: RE Chemical,
Civil,
Computer
Science,
Electrical,
Electronics
&
Elect.
Communication,
Energy,
Industrial,
Instrumentation,
Marine,
Mechanical,
Metallurgical, Mining, Naval Architecture, or
Production Engg., or in Ceramic & Glass
Chemical Tech., or Engg. Physics (RE Only).
Degree in Electrical or Electronics &
Electrical Communication Engg., M.Sc.
degree in Mathematics, Physics or Statistics.
Code:01
Degree in Mechanical (all specializations)
Aerospace (02, 03, 07), Energy (02),
Code:02
Metallurgical (01), Production (01, 04, 06)
Code:03
Engg.
Code:04
Code:05
Code:06
Code:07
Degree in Mining Engg.
Degree in Chemical Engg./Technology, Engg.
Physics, Ceramic and Glass Technology,
Materials Technology, Plastic and/or Rubber
Technology,
Polymer
Science
and
Technology, Solid State Physics, Chemistry,
Material Science, Industrial Chemistry,
Polymer Chemistry.
Degree in Chemical, Mechanical or
Metallurgical Engg., or in Ceramic and Glass,
Chemical or Materials Tech.
Degree in Aerospace, Civil, Marine Engg.,
Mechanical, Ocean Engg, Naval Architecture,
Ship-building technology or equivalent.
Code:01
Bachelor's in Electronics and Electrical
Communication, Computer Sc. and Engg.,
Electrical Engg., M.Sc. in Physics, Maths.
Code:02
Batchelor in Electronics Engg. Electronics &
Electrical Communication, M.Sc. in Physics,
Chemistry, Electronic Sciences, Applied
Optics, Materials Science
Degree in Chemical, Materials, Plastics and/or
Technology
Rubber, Polymer or Textile Tech.,
Mechanical or Production Engg., or in
Physics, Chemistry.
M.C.P Degree Program
6.20
7
Architecture &
Regional
Planning.
AP
Master of City Planning.
Degree in Architecture (B.Arch.) or Civil
Engg.(B.Tech./ BE) or Bachelor of Planning
(B.Planning), Students with MA/M.Sc. degree
in Geography, Economics and Sociology are
also eligible for admission.
INDIAN INSTITUTE OF TECHNOLOGY MADRAS, CHENNAI - 600036 CODE: MD
The minimum eligibility is a Degree with first class or minimum of 60% aggregate marks (or equivalent grade point average) in the
corresponding or specified branch.
S.No
7.1
Department
Aerospace
Engineering
7.2
Applied
Mechanics
(Code no. of the
Specialization to
be indicated in
the data sheet)
AM
7.3
Chemical
Engineering
CH
Quality Improvement Programme - Sponsored by AICTE
Code
AE
Fields of Specialization
Aerodynamics, Propulsion,
Code: 01
Structures.
Minimum Qualification
Bachelor's degree in Aerospace, Automobile, Chemical, Civil,
Computer Science, Electrical, Mechanical, Metallurgical, Naval
Architecture, or Production Engg.
Engineering Mechanics
Code: 01
Bachelor's degree in Aerospace, Civil, Marine Engineering,
Mechanical or Naval Architecture.
Industrial Tribology
Code: 02
Bachelor's Degree in Aerospace, Chemical, Mechanical,
Metallurgical or Production Engg. Automobile Engineering,
Instrumentation Engg, Manufacturing Engg, Machine Tools
Engg.
Maintenance Engineering and
Code: 03
Bachelor's degree in Aerospace, Automobile, Chemical,
Management
Computer Science, Electrical, Industrial, Instrumentation,
Mechanical or Production Engg, Manufacturing Engg, Machine
Tools Engg.
Biomedical Engineering
Code: 04
Bachelor's degree in Biomedical, Chemical, Civil, Computer
Science, ECE, Electrical, Instrumentation, Mechanical, or
Metallurgical Engineering or Master's degree in Physics/ Applied
Physics.
Bachelor’s degree in Chemical Engineering, Biochemical
Chemical Engineering
Code: 01
Transport
processes,
process
control Engineering, or Environmental Engineering.
Biochemical Engg., Environmental Engg,
Materials and High polymers Engg.
25
26
Information Brochure for Admission to M.Tech under QIP 2005-2006
7.4
Civil
Engineering
CE
Computer
Science & Engg
Electrical
Engineering
CS
7.7
Mechanical
Engineering
ME
7.8
Metallurgical &
Materials Eng
Ocean
Engineering
MT
7.5
7.6
7.9
EE
OE
Building Technology &
Construction Management
Environmental Engineering.
Code: 01
Bachelor’s degree in Civil Engineering or Architecture
Code: 02
Geotechnical Engineering
Hydraulic & Water Resources
Engg.
Structural Engg.
Transportation Engg.
Computer Science &
Engineering
Communication Systems
Code: 03
Code: 04
Bachelor’s degree or equivalent in Civil Engg. or Chemical
Engg., Agricultural Engg., Environmental Engg., Biotechnology.
Bachelor’s degree in Civil Engineering
B.Tech. Degree or equivalent in Civil Engineering or
Agricultural Engineering, Environmental Engineering.
Bachelor’s degree in Civil Engineering.
Bachelor’s degree in Civil, Architecture or Mechanical Engg.
Bachelor’s degree in Computer Science and Engineering.
Code: 05
Code: 06
Code: 01
Code: 01
Bachelor’s degree in Electrical Engg./ Electronics &
Communication Engineering.
Power Systems and Power
Code: 02
Bachelor’s degree in Electrical Engineering / Electrical and
Electronics
Electronics Engineering.
Microelectronics & VLSI
Code: 03
Bachelor’s degree in Electrical / Electrical and Electronics /
Design
Electronics & Communication / Instrumentation Engg.
Control and Instrumentation
Code: 04
Bachelor’s degree in Electrical / Electrical and Electronics /
Systems
Instrumentation Engineering.
Code: 01
Bachelor’s degree in Mechanical Engg, Aeronautical/ Aerospace
Thermal Engg. Stream
(Combustion & Propulsion, Heat Transfer & Engineering, Automobile Engineering, Energy Engineering,
Thermal Power, I.C. Engines & Gas Marine Engg, Petroleum Engg, Naval Architecture.
Turbines, Hydroturbomachines, Refrigeration
&
Air
Conditioning,
Thermal
Turbomachines)
Bachelor’s degree in Mechanical, Aeronautical/ Aerospace
Code: 02
Design Stream
(Machine Design, Machine Dynamics, Engineering, Automobile Engineering.
Mechanical
Handling,
Composites
Technology)
Bachelor’s degree in Mechanical Engg., Computer Science,
Manufacturing Engg. Stream Code: 03
Electrical Engg., Instrumentation, Automobile Engg., Industrial
(Advanced Manufacturing Engineering,
Engg., Machine Tool Engg., Manufacturing Engg., Production
Computer Integrated Manufacturing,
and Industrial Engg., Production Engg.. Naval Architecture.
Precision Engineering)
Metallurgical & Materials
Code: 01
Bachelor’s degree in Metallurgical, Mechanical or Production
Engineering
Engineering
Ocean Engineering
Code: 01 Bachelor’s degree in Aerospace, Civil, or Mechanical
Engineering or in Naval Architecture.
7.10
8
Physics
PH
Solid State Technology
Code: 01
Bachelor’s degree in Electrical Engg. or Metallurgical Engg., or
Master’s degree in Materials Science, Physics, Applied Physics.
INDIAN INSTITUTE OF TECHNOLOGY ROORKEE, ROORKEE - 247667 CODE: RR
Minimum qualification for admission- Candidates of general category seeking admission to the PG programme must have at least 60%
marks or 6.75 CGPA on a 10 point scale at qualifying degree level. For SC/ST category candidates this percentage is 55% or 6.25 CGPA
on a 10 point scale. The percentage of marks will be considered as aggregate awarded in qualifying degree examination.
SNo
8.1.
Department
Alternate Hydro
Energy Centre
Code
AH
8.2.
Architecture and
Planning
Chemical
Engineering
AR
M.Arch., M.U.R.P.
CH
Computer Aided Process Plant Design.
8.3.
Fields of specialization
Alternate Hydro Energy Systems (AHES).
Industrial Pollution Abatement.
Industrial Safety & Hazards Management
8.4.
Civil
Engineering
(Code no. of the
specialization to
be indicated in
the data sheet)
Quality Improvement Programme - Sponsored by AICTE
CE
Bridge Engg.
Building Science & Tech.
Code:01
Code:02
Computer Aided Design.
Code:03
Environmental Engg.
Code:07
Minimum Qualification
Batchelor degree in Civil/ Electrical/
Mechanical/
Industrial/
Chemical/
Electronics/
Computer/
Agricultural/
Environmental Engg. or its equivalent with
minimum two years of full time work
experience in responsible capacity in relevant
field.
Degree or its equivalent in Architecture,
Degree in Civil Engg. are also eligible.
Degree in Chemical/Bio-Chem./Pulp & Paper/
Chemical Tech./ Petro Chem./ Polymer Tech./
Petroleum Refining or its equivalent.
Degree in Chemical/Pulp & Paper/ Civil/
Mechanical/ Biochemical/ Environmental
Engg./ Chemical Tech. or its equivalent.
Degree in Chemical/Pulp & Paper/ Civil/
Mechanical/ Biochemical/ Environmental
Engg./ Chemical Tech. or its equivalent.
For M. Tech. (Building Science and
Technology)- Bachelor's degree in Civil
Engg./ Structural Engg / Construction
Technology or its equivalent/ B.Arch.
For M. Tech. (Computer Aided Design)
Bachelors degree in Civil Engg. or its
equivalent.
For M. Tech. (Environmental Engg.)
Bachelors degree in Civil Engg/Chemical
Engg/Environmental Engg. or its equivalent
27
28
Information Brochure for Admission to M.Tech under QIP 2005-2006
Geotechnical Engg.
8.5.
Earthquake
Engineering
EQ
8.6.
Electrical
Engineering
EE
8.7.
Electronics and
Computer
Engineering
LC
For M. Tech. (Geotechnical Engg with
diversification to Rock Mechanics) Bachelor's
degree in Civil Engg/Mining Engg. or its
equivalent
Hydraulics Engg.
Code:10
For M.Tech. (Hydraulic Engg) Bachelor's
degree in Civil Engg or its equivalent
Geomatics Engg.
Code:14
For M.Tech. (Geomatics Engg) Bachelor's
degree
in
Civil
Engg./
Electronics
Engg/Electrical Engg./ Computer Science/
Information Technology/ Marine Engg./
Architecture/ Mining Engg.
Rock Mechanics
Code:15
For M. Tech. (Structural Engg with
diversification to Bridge Engg) Bachelors
Structural Engg.
Code:17
degree in Civil Engg./ Structural Engg. or its
equivalent.
For M. Tech. (Transportation Engg. with
Traffic Engg.
Code:19
diversification to Traffic Engg.) Bachelor’s
Transportation Engg.
Code:20
degree in Civil Engg. or its equivalent.
Structural Dynamics, Soil Dynamics.
First class Bachelor's degree in Civil Engg. or
its equivalent.
Engineering Seismology & Seismotectonics
First Class M.Sc./M.Tech. in Geophysics/
Physics/ Mathematics/ Geology
Measurement & Instrumentation System Engg. & Operations Degree in Electrical Engg./ Electronics &
Research.
Communication/ Instrumentation Engg. or its
equivalent.
Power System Engg.
Power Apparatus and Electric Drive.
Communication Systems.
RF & Microwave Engg.
Semiconductor Devices & VLSI Technology
Code:08
Degree in Electrical Engg. or its equivalent.
Communication Systems/Bachelor’s Degree
in Electronics & Communication Engg. or its
equivalent
with
background
in
Communication,
Microwave
and
Semiconductor devices.
R.F. & Microwave Engg./Bachelor’s degree
in Electronics and Communication Engg. or
its
equivalent
with
background
in
Communication,
Microwave
and
Semiconductor devices.
Semiconductor
Devices
&
VLSI
Control & Guidance.
Computer Sc. & Engineering.
Information Technology
8.8.
Hydrology
Quality Improvement Programme - Sponsored by AICTE
HY
Surface water hydrology, Ground water hydrology, Watershed
management.
Technology/Batchelor’s degree in Electronics
& Comm. Engg. or its equivalent with
background in Communication, Microwave
and Semiconductor devices.
Control & Guidance/Batchelor’s degree in
Electronics & Comm. Engg./Elect. Engg. or
its equivalent with background in Control
Theory and Electronics.
Computer Science & Engg./Batchelor’s
degree in any branch of Engg./M.Sc. in
Electronics/Computer Science/Physics/ Maths
or Statistics with background in Electronics &
Computers.
Information Technology/Batchelor’s degree in
any branch of Engg./ Technology.
Bachelor's degree in Civil/ Mechanical/
Agricultural Engg./ Hydrology or its
equivalent qualification or M.Sc./ M.Tech
(Master's) degree in Chemistry/ Geology/
Geophysics/ Applied Geology/ AppliedGeophysics/
Physics/
Meteorology/
Geography/
Atmospheric
Physics/
Environmental Science with Mathematics in
B.Sc. (Bachelor's) course as one of the
subjects OR M.Sc. degree in Statistics with
Physics or Mathematics at B.Sc. level. OR
M.Sc. degree in Mathematics with Physics at
B.Sc. level.
AMIE candidates with B.Sc. or Engg.
diploma qualifications who have completed
sections A & B examinations of the Institution
of Engineers (India) and have been selected as
AMIE (Civil or Mech) and have at least 3
years research or teaching or other
professional experience in responsible
capacities may also be admitted after such
applicants have passed a prescribed written or
oral test.
For admission to Watershed Management
option of the P.G. Diploma, candidates with
29
Information Brochure for Admission to M.Tech under QIP 2005-2006
8.9.
Mechanical and
Industrial
Engineering
ME
Machine Design Engg.
Production & Industrial System Engg.
Thermal Systems Engg.
Welding Engg.
8.10. Metallurgical
Engg. &
Materials Engg.
MT
Industrial Metallurgy.
Physical Metallurgy.
Corrosion Engineering
8.11. Water
Resources
Development
Training Centre
9
WR
Water Resources Development,
Irrigation Water Management
30
M.Sc. degree in Soil Science or Two years
diploma in Forestry after B.Sc. with Physics
and Mathematics in the B.Sc. are also eligible.
Batchelor’s degree in Mechanical/ Industrial
Production/ Aeronautical Engg./ Automobile
Engg. or its equivalent.
Batchelor’s degree in Mechanical/ Industrial
Production/Engg. or its equivalent.
Batchelor’s degree in Mechanical/ Industrial
Production/
Chemical/
Aeronautical/
Automobile Engg. or its equivalent.
Batchelor’s degree in Mechanical/ Industrial/
Production/ Metallurgical/ Chemical Engg. or
its equivalent.
Degree in Metallurgical Engg./ Mech./
Industrial/ Prod. Engg. or its equivalent.
Degree in Metallurgical Engg. or its
equivalent.
Engineering Graduates of all branches,
M.Phil. degree in Chemistry, Physics or
Materials Sciences.
Degree in Civil/ Electrical/ Mechanical/
Agricultural Engg./ or equivalent with 60%
marks (AMIE in the appropriate branch with
first class Diploma or B.Sc.) and at least 2
years professional experience in responsible
capacities.
ANNA UNIVERSITY, CHENNAI - 600025 CODE: AU
SNo
9.1.
9.2.
9.3.
9.4.
Department
Chemical
Engineering
Leather
Technology
Civil
Engineering
Electrical
Code
CH
LT
CE
EE
Fields of specialization
Minimum Qualification
Petroleum Refining and Petro Chemicals, Ceramic Technology, Degree in Engg./Tech. in the appropriate
Chemical Engg., Polymer Science and Engg.
branch
Leather technology, Footwear Science & Engineering.
Degree in Engg./Tech. in the appropriate
branch
Environmental Engg., Structural Engg., Hydrology and Water Degree in the appropriate branch in Engg.
Resources Engg., Construction Engg. and Management, with preferably 60% or more marks in the
Irrigation Water Management, Urban Engg., Remote Sensing, aggregate or its equivalent in the Grade
Soil Mechanics and Foundation Engg.
system.
Power Systems Engg., Control and Instrumentation, Power Degree in the appropriate branch in Engg.
Engineering
9.5.
Information &
Communication
Engg.
Electronics and Drives, High Voltage Engg.,
Engineering, Instrumentation Engg.
IC
Electronics with preferably 60% or more marks
aggregate or its equivalent in the
system
Optical Communication, Medical Electronics, Applied Degree in the appropriate branch in
Electronics, Communication Systems, Laser and Electro Optical with preferably 60% or more marks
Engg., Computer Science & Engg., Software Engg.
aggregate or its equivalent in the
system
in the
Grade
Engg.
in the
Grade
10 BENGAL ENGINEERING COLLEGE, HOWRAH - 711103 CODE: BE
S.No
10.1.
Department
Civil
Engineering
Code
CE
10.2.
Electrical
Engineering
EE
Fields of specialization
Structural Engg. and Concrete Tech., Soil Mechanics and
Foundation Engg., Water Resources Engg., Environmental
Engg., Highway and Traffic Engg.
Power Systems, Electrical Machines, Control Systems, Power
Electronics & Drives, Power Plant Instrumentation.
Minimum Qualification
Degree in the relevant field in Engg. or
equivalent
Degree in the relevant field in Engg. or
equivalent
11 INDIAN SCHOOL OF MINES, DHANBAD 826004 CODE: IS
S.No
11.1
11.2
Department
Fuel & Mineral
Engineering
Mining
Engineering
Code
FM
MI
Fields of specialization
Mineral Engg., Fuel Engg.
Minimum Qualification
Degree
in
Chemical/
Mechanical/
Metallurgical/ Mining/ Mineral Engg.
Coal Mining, Rock Mechanics, Mine Surveying, Metalliferous Degree in Mining Engineering
Mining, Mine Planning and Design, Mine Systems Engg., Rock
Excavn. Engg., Mine Environmental Engg., Surface Mining,
Mine and Mineral Economics, Mine Management, Surface
Environment, Marine Mining, Mine Safety Engg.
12 INSTITUTE OF TECHNOLOGY, BANARAS HINDU UNIVERSITY, VARANASI - 221005 CODE: VN
S.No
12.1
12.2
Department
Metallurgical
Engineering
Mining Engg.
Code
MT
MI
Fields of specialization
Extractive Metallurgy, Alloy Technology, Metals and Materials
Processing.
Mine Planning, Mine Environment, Rock Mechanics.
Minimum Qualification
Degree in Metallurgical Engg.
Degree in Mining Engg.
13 JADAVPUR UNIVERSITY, KOLKATA 700032 CODE: JU
S.No
13.1
Department
Electrical
Engineering
Quality Improvement Programme - Sponsored by AICTE
Code
EE
Fields of specialization
Electrical Machines
Control Systems
Power Systems
Code : 01
Code : 02
Code : 03
Minimum Qualification
Degree or equivalent in Engg. in the
appropriate branch with at least 60% marks.
31
32
Information Brochure for Admission to M.Tech under QIP 2005-2006
13.2
Electronics and
Telecommunication Engg.
EC
13.3
Mechanical
Engineering
ME
13.4
Production
PE
High Voltage
Electrical Measurements
Communication Engg.
Computer Engg.
Control Engg.
Electronic Devices
Microwave Engg.
Applied Mechanics
Heat Power Engg.
Fluid and Hydraulic Engg.
Production Engg.
Machine Design.
Production Technology:
CAD/CAM,
Robotics,
Tribology,
Flexible
Manufacturing, Computer Integrated Manufacturing,
Ergonomics, Designing for Production.
Production Management:
Quantitative
Management,
Terotechnology,
Reliability, Behavioral Science, Simulation Theory
and Applications.
Code : 04
Code : 05
Code : 01
Code : 02
Code : 03
Code : 04
Code : 05
Code : 01
Code : 02
Code : 03
Code : 04
Code : 05
Code : 01
Degree or equivalent in Engg. in the
appropriate branch with at least 60% marks.
Degree or equivalent in Engg. in the
appropriate branch with at least 60% marks.
Degree in Production/ Industrial/ Mechanical/
Manufacturing Engg. with at least 60%
marks.
Code : 02
14 MOTILAL NEHRU NATIONAL INSTITUTE OF TECHNOLOGY, ALLAHABAD - 211004 CODE: MN
S.No
14.1
Department
Applied
Mechanics
Code
AM
Fields of specialization
Applied Mechanics.
Water Resources Management.
Material Science and Engg.
14.2
Civil
Engineering
CE
Environmental Engg.
Geotechnical Engineering.
Minimum Qualification
B.E or Equivalent degree in Aeronautical,
Agricultural, Chemical, Civil, Mechanical,
Marine or Naval Architecture Engineering.
B.E. or Equivalent degree in Civil,
Agriculture Engineering.
B.E. or Equivalent Degree in Mech.,
Production,
Automobile,
Industrial,
Aeronautical,
Ceramics,
Metallurgy,
Chemical, Electrical, Electronics.
B.E or Equivalent Degree in Architectural,
Agricultural, Chemical, Civil, Mech. Engg.
B.E or Equivalent Degree in Architectural and
Civil, Aeronautical or Mechanical Engg.
Structural Engg.
Environmental Geotechnology.
14.3
Computer
Science and
Engineering
CS
Computer Science & Engineering.
Software Engineering.
14.4
Electrical Engg.
EE
14.5
14.6
Electronic Engg.
Mechanical
Engg.
EC
ME
Electrical Engg (Control/ Instrumentations, Power Systems)
Power Electronics and ASIC Design.
Electronics (Digital Systems).
Design or Process Machines.
Production Engineering.
Computer Aided and Manufacturing.
B.E or Equivalent Degree in Aeronautical,
Architecture, Civil or Mechanical Engg.
B.E or Equivalent Degree in Chemical,
Environmental, Agricultural or Civil Engg.
B.E in Computer Science and Engineering or
its Equivalent, B.E in Electrical, Electronics,
M.C.A. or
M.Sc (Computer Science) or Equivalent.
B.E in any Branch of Engineering, M.C.A or
M.S.C. (Computer Science) or equivalent.
B.E in Electrical or Electronics or Equivalent.
B.E in Electrical or Electronics or Equivalent.
B.E
or
Equivalent
in
Mechanical,
Automobile,
Agricultural,
Production,
Industrial, Chemical or Aeronautical Engg.
B.E
or
Equivalent
in
Mechanical,
Automobile,
Agricultural,
Industrial,
Chemical or Metallurgy Engineering
B.E
or
Equivalent
in
Mechanical,
Automobile,
Agricultural,
Production,
Industrial, Chemical or Metallurgy Engg.
15 NATIONAL INSTITUTE OF INDUSTRIAL ENGINEERING, MUMBAI - 400087 CODE: NI
S.No
15.1
Department
Industrial
Engineering
(PGDIE)
Code
IE
Fields of specialization
Industrial Engineering.
Minimum Qualification
First class Degree in Engineering/ Technology
(55% in case of SC/ST candidates) and a
minimum of two years experience in the
concerned field.
16 NATIONAL INSTITUTE OF TECHNOLOGY, CALICUT REC - 673601 CODE: CL
Wherever AMIE awarded by the Institute of Engineers India is acceptable, the candidate must pass with 55% mark in part A &B
separately with subjects mentioned under each of the fields of specialization, as approved.
S.No
16.1
Department
Civil
Engineering
Quality Improvement Programme - Sponsored by AICTE
Code
CE
Fields of specialization
Structural Engineering
Traffic and Transportation Planning
Offshore Structures
Code : ST
Code : TT
Code : OS
Minimum Qualification
Bachelor's Degree or AMIE in
Engineering.
Civil
33
34
Information Brochure for Admission to M.Tech under QIP 2005-2006
16.2
Computer Engg.
CS
Computer Science & Engg.
Code: CS
16.3
Electrical
Engineering
EE
Instrumentation & Control Systems
Code : IC
Power Systems
Code : PS
Power Electronics
Digital Systems and Communication Engg.
Electronics Design and Technology
Industrial Engineering and Management
Code : PE
Code : DC
Code : ED
Code: IM
Thermal Sciences
Code: TS
Manufacturing Technology
Code: MT
Energy Management
Code: EM
Materials and Science and Technology
Code: MS
16.4
Electronics
Engg.
EC
16.5
Mechanical
Engineering
ME
Bachelor’s Degree or AMIE in Computer
Engg.
Bachelor's Degree or AMIE in Electrical and
Electronics Engg./Instrumentation & Control
Systems.
Bachelor's Degree or AMIE in Electrical and
Electronics Engg.
Bachelor's Degree or AMIE in Electronics
and Communication.
Bachelor's degree or AMIE in Mechanical
Engg. / Production Engg./ Industrial Engg.
Bachelor's degree or AMIE in Mechanical
Engineering.
Bachelor's degree or, AMIE in Mechanical
Engg./ Production Engg.
Bachelor's degree or AMIE in Mechanical
Engg./ Chemical Engg.
Bachelor’s degree or AMIE in Mechanical
Engineering/ Production Engg./ Metallurgical
Engineering.
17 NATIONAL INSTITUTE OF TECHNOLOGY KARNATAKA, SURATHKAL - 575025 CODE: SK
Admission is open to candidates who have passed the prescribed qualifying Degree Examination with not less than 50% of marks in the aggregate
(taking into account the marks secured in all the subjects of all the public examinations conducted during the entire degree programme) in the appropriate
branch of engineering of National Institute of Technology Karnataka, or any other Indian University or any other examination recognized by NITK as
equivalent thereto. However, this prescribed minimum shall be 45% in the case of SC/ST candidates.
S.No
Department
Code
Fields of specialization
Minimum Qualification
Applied Mechanics AM
Marine Structures
Code : MS (i) B.E./B.Tech./B.Sc.(Engg.) in Civil Engg. of
17.1
Hydraulics
any recognized Indian Universities.
Hydraulics & Water Resources Engg.
Code : HW
(ii) AMIE in Civil Engineering.
Code : PD
(i) B.E./ B.Tech./ B.Sc.(Engg.) in Chemical
17.2
Chemical
CH
Chemical Plant Design
Engg./ Polymer Technology/ Ceramic and
Engineering
Cement Technology/Bio-chemical Engg./
Bio-Technology.
(ii) AMIE (Chemical Engg.)/A.M.I.I.Ch.E.
(iii) M.Sc. Industrial Chemistry.
M.Sc. Applied Chemistry.
Industrial Pollution Control
Code : PC
Code : ST
Code : GT
17.3
Civil Engineering
CE
Structure Engineering
Geotechnical Engg.
17.4
Computer Engg.
CS
Computer Science & Engg.
17.5
Electrical &
Electronics
Engineering
Electronics &
Communication
Engg.
EE
Power and Energy Systems
Code : PS
EC
Micro Electronics
Code : MI
17.6
Digital
Electronics
Communications
&
Advanced Code : DE
17.7
Humanities
HS
Master of Business Administration (2years)
17.8
Mathematical &
Computational
Science
MC
Systems Analysis and Computer
Applications
Code : SY
Master of Computer Application
Code : MC
Heat Power Engg.
Code : HP
17.9
Mechanical Engg.
Quality Improvement Programme - Sponsored by AICTE
ME
(i) B.E./ B.Tech./ B.Sc.(Engg.) in Chemical/
Civil/ Mechanical/ Metallurgical/ Mining
Engg./ Polymer Technology/ Ceramic and
Cement Technology/ Environmental Engg./
Bio-Chemical Engg./ Bio-Technology.
(ii) AMIE in Chem./ Civil/ Metallurgy/
Mechanical/ Mining Engg.
(iii) M.Sc. in Industrial Chemistry/ Applied
Chemistry/ Bio-Technology.
(i) B.E./B.Tech./B.Sc. (Engg.) in Civil Engg. of
any recognized Indian Universities
(ii) AMIE in Civil Engineering.
B.E/B.Tech. in Computer Sc. & Engg.;
Information Sc.&Engg./Technology.
(i) B.E./ B.Tech. in Electrical Engg. or Electrical
& Electronics Engg.
(ii) AMIE in Electrical Engg.
(i) B.E./B.Tech./B.Sc. (Engg.) in E&C.,
Electronics
&
Telecommunications/
Instrumentation Technology/ E&E
(ii) Grade IETE.
(i) B.E./ B.Tech./ B.Sc.(Engg.) in E&C,
Electronics & Telecommunications.
(iii) Grade IETE.
i) Batchelor’s degree in any discipline from a
recognized university.
ii) Rank obtained in the CAT (Common
Admission Test)
B.E./B.Tech./B.Sc.(Engg.) any branch M.Sc.
(Mathematics/ Statistics/ Physics)/ MCA (Master
of Computer Applications) or equivalent.
i) Any Bachelor degree at least three years
duration with Mathematics at 10+2 level.
ii) Must have valid score in AIMCET2004
i) B.E./B.Tech./B.Sc.(Engg.) Examinations in
Mechanical
Engg./Automobile
Engg./
Industrial and Production Engg./ Manufacturing Engg./ Industrial & Manufacturing Engg.
ii) AMIE in Mechanical Engg.
35
36
Information Brochure for Admission to M.Tech under QIP 2005-2006
17.10
Metallurgical
Materials
Engineering
&
MT
Advanced Manufacturing Engg.
Code : MF
Process Metallurgy
Code : PM
Materials Engineering
Code : ML
18 NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELA – 769008
S.No
18.1
Department
Civil Engineering
Code
CE
18.2
Mechanical
Engineering
ME
i) B.E/B.Tech./B.Sc(Engg.) in Mechanical Engg./
Industrial & Production Engg./ Industrial
Engg./ and Management/ Manufacturing
Engg./ Production Engg.
ii) AMIE in Mechanical Engg.
(i) B.E./ B.Tech./ B.Sc. in Metallurgical Engg.,
(ii) AMIE in Metallurgical Engg. (by exam.)
(iii) Associate Member of the Indian Institute of
Metals (by examn.) – A.M.I.I.M.
(iv) B.E. Degree in Chemical Engg.
(v) M.Sc. Chemistry (Physical Chemistry/
Analytical Chemistry/ Industrial Chemistry/
Applied Chemistry)
(vi) M.Sc. (Applied Science)
(vii) M.Sc. (Materials Science)
(viii)Master Degree in Mineral Beneficiation/
Mineral Processing/ Ore Dressing
(i) B.E./ B.Tech./ B.Sc.(Engg.) in Metallurgy/
Mechanical/
Chemical/
Industrial/
Production/ Polymer Technology/ Ceramic
and Cement Technology/ Industrial Engg.
and Manufacturing Engg.,
(ii) AMIE in Mechanical/Metallurgical Engg. by
Exam.
(iii) AMIM(by exam) of Indian Institute of metals.
(iv) AMIE Ceramics of Indian Institute of
Ceramics, Kolkata by exam.
(v) M.Sc. in Materials Science
(vi) M.Sc. Physics (Solid State)
CODE: RK
Fields of specialization
Structural Engineering; Soil Mechanics & Foundation
Engineering.
Production Engineering
Code: PE
Machine Design Analysis
Code: MD
Minimum Qualification
Bachelor of Engineering in Civil Engg. with
60% marks in aggregate.
Degree in Mechanical Engg. with 60% marks
in aggregate.
19 NATIONAL INSTITUTE OF TECHNOLOGY, TIRUCHIRAPPALLI - 620015
S.No
19.1
Department
Civil Engineering
Code
CE
19.2
Computer Science
& Engg.
19.3
Electrical &
Electronics Engg
Mechanical Engg.
19.4
19.5
19.6
Metallurgical
Engg.
Production Engg.
CODE: TR
CS
Fields of Specialization
Transportation Engg. & Management.
Structural Engineering.
Computer Science.
Code:TE
Code:SE
Code:CS
EE
Power Systems
Code:PS
Bachelor’s Degree in Computer Science and Engg. /
Electrical & Electronics Engg. / Electronics &
Communication Engg. / Instrumentation & Control
Engg. / Information Technology
Bachelor’s Degree in Electrical & Electronics Engg.
ME
Design & Production of Thermal
Power Equipment
Industrial Safety Engg.
Welding Engg.
Code:DP
Bachelor’s Degree in Mechanical Engineering
Code:IS
Code:WE
Materials Science
Code:MS
Manufacturing Technology
Industrial Engg.
Code:MT
Code:IE
Bachelor’s Degree in any branch of Engg/Tech.
Bachelor’s Degree in Metallurgical / Mechanical /
Production Engg.
Bachelor’s Degree in Metallurgical / Mechanical /
Production / Ceramics / Polymer Sc. / Electro-Chemical
Engg. / Master’s Degree in Physics / Chemistry /
Materials Sc./ Applied Sc. / Applied Physics / Applied
Chemistry / Polymer Sc.
Bachelor’s Degree in Mechanical / Production Engg.
Bachelor’s Degree in Industrial / Mechanical/
Production Engg.
MT
PE
20 NATIONAL INSTITUTE OF TECHNOLOGY, WARANGAL - 506004
Minimum Qualification
Bachelor’s Degree in Civil Engineering
CODE: WR
Minimum Eligibility: 1st class Bachelor's degree in Engg. with a minimum of 60% marks in aggregate
S.No
20.1
20.2
20.3
Department
Civil Engineering
Electronics &
Communication
Engg.
Electrical
Engineering
Quality Improvement Programme - Sponsored by AICTE
Code
CE
EC
EE
Fields of specialization
Engineering Structures.
Geotechnical Engg.
Transportation Engg.
Water Resources Engg.
Minimum Qualification
B.E./B.Tech. in Civil Engg.
B.E./B.Tech. in Civil Engg.
B.E./B.Tech. in Civil Engg./Agricultural Engg.
Remote Sensing & GIS.
Electronic Instrumentation.
VLSI System Design.
B.E./B.Tech. in Civil Engg.
B.E./B.Tech. in ECE, E&I, EEE.
B.E./B.Tech. in ECE, CSE.
Power Systems Engg.
Power Electronics & Drives Engg.
B.E./B.Tech. in Electrical/IEEE.
37
38
Information Brochure for Admission to M.Tech under QIP 2005-2006
20.4
Mechanical
ME
Thermal Engineering.
Manufacturing Systems Engg.
21 PSG COLLEGE OF TECHNOLOGY, COIMBATORE – 641004
S.No
21.1
Department
Computer
Science & Engg.
Code
CS
Fields of specialization
Computer Science & Engg.
21.2
Electrical &
Electronics
Engineering
Mechanical
EE
Control Systems, Applied Electronics.
ME
Production
Engineering
Textile
Technology
PE
Engineering Design, Energy Engg.
Product Design & Commerce
Production Engg., Industrial Engg., CIM.
TX
Textile Technology.
21.3
21.4
21.5
B.E./B.Tech. in Mechanical
B.E./B.Tech. in Mechanical/Production/
Mechatronics/Industrial Engg.
CODE: PS
Minimum Qualification
Degree in Electrical & Electronics Engg., Electronics &
Communication Engg., Computer Science & Engg., Information
Technology, MCA, M.Sc.(CT), M.Sc.(Software) Engg.
Degree in Electrical & Electronics Engg., Electronics &
Communication Engg., Instrumentation & Control Engg.,
Electronics & Instrumentation.
Degree in Mechanical, Automobile.
Degree in Mechanical, Automobile, Production, Industrial Engg.
Degree in Production, Mechanical, Metallurgy, Automobile.
Degree in Textile Technology, Textile Chemistry, Textile Plant
Engineering, Fashion Technology.
22 SHRI G.S. INSTITUTE OF TECHNOLOGY AND SCIENCE, INDORE - 452003
S.No
22.1
Department
Electrical Engg.
Code
EE
Fields of specialization
Digital Techniques and Instrumentation, Power Electronics.
CODE: GS
Minimum Qualification
Degree in the appropriate branch of Engg.
23 SRI JAYACHAMARAJENDRA COLLEGE OF ENGINEERING, MYSORE - 570006
CODE: SJ
Minimum eligibility is a Batchelor’s Degree with minimum of 50 % marks in aggregate of all the years of the degree examinations (or
equivalent grade point average) in the relevant field.
S.No
23.1
23.2
Department
Civil Engg.
Electronics &
Communication
Code
CE
IL
23.3
Instrumentation
Technology
IN
Fields of specialization
Industrial Structures.
Industrial Electronics.
Bio-medical Instrumentation.
Minimum Qualification
Bachelor’s degree in Civil Engineering.
Bachelor’s degree in Electronics & Communication/
Instrumentation
Technology/
Electronics
&
Telecommunications/ Telecommunications/ Electrical &
Electronics/ Biomedical Engg./ Medical Electronics.
Bachelor's degree in Instrumentation Technology/ Biomedical
Engg./ Electronics & Communication/ Electrical & Electronics/
Computer Science & Engg./ Electronics & Telecommunication/
Telecommunication.
23.4
Mechanical
Engineering
ME
Maintenance Engineering.
Bachelor’s degree in Mechanical Engg./ Industrial Production
Engineering/
Automobile
Engg./Industrial
Engg.
&
Manufacturing Engg./Industrial Engg. & Management/Electrical
& Electronics/ Metallurgy.
24 UNIVERSITY VISVESVARAYA COLLEGE OF ENGINEERING, BANGALORE - 560056 CODE: UV
S.No
24.1
Department
Civil
Engineering
Code
CE
Fields of specialization
Minimum Qualification
Structural Engg., Geotechnical Engg., Environmental Engg., Degree in Civil Engg. with minimum second
Construction Technology; Highway Engineering, Water class.
Resources Engg., Pre-stressed Concrete.
25 VISVESVARAYA NATIONAL INSTITUTE OF TECHNOLOGY, NAGPUR – 440011 CODE: VR
S.No
25.1
25.2
Department
Civil
Engineering
Electrical
Engineering
Quality Improvement Programme - Sponsored by AICTE
Code
CE
EE
Fields of specialization
Environmental Engg.
Power System.
Minimum Qualification
B.E./B./Tech. in Civil Engg./ Environmental
Engg. or AMIE Certificate in Civil Engg.
Degree in Electrical Engg., Power Electronics
39