Philips Ledalite Recessed Luminaires (15/16" T-Grid) - Quickship Items
Limit of 100 per release
Fluorescent
LED
PureFX (94), Vectra (97), Voice (98), Shine (33)
ArcForm (36)
PureFX (94), Vectra (97), Voice (98)
Product Family
1x4
Size
2x2
2x4
2 or 3
2 or 3
NO
1 or 2
2 or 3
2 or 3
1 or 2
N/A
1x4
2x2
1x4
2x2
LED†
LED†
LED†
LED†
Lamping (Note: Fluorescent lamps are not supplied)
T5 (14W, 28W)
T5HO (24W, 54W)
1 or 2
T8 (17W, 32W)
TT5 (25W, 40W, 55W)
N/A
Wiring Configuration* (Note: ALL luminaires are available with 1cct & 1cct dimming (0-10V Standard) See below for others)
NO
1cct w/ battery pack
YES
2cct
N/A
2cct w/ battery pack
Specialty Ballasts
347V T8 32W
(non dimming)
347V T5HO 54W
(non dimming)
347V TT5 55W
(non dimming)
YES
NO
YES
N/A
N/A
YES
Pre-Installed 6’
Flex Whips
N/A
YES
* Note: Not all wiring configurations are available with all light source options. Consult factory for full list of available options.
† Note: All color temperatures and lumen packages are available for QuickShip for LED products.
Exclusions:
•Drywall trim kit options
•Chicago housings
•Response sensors & Actilume day/occupancy sensors
•Surface mount versions
•All non-standard, 3rd party ballasts, drivers and components
•Prior Hold for Release or Do Not Ship Before orders
Please note: Due to continuing product improvements, Philips Ledalite reserves the right to change product specifications without notice.
Information current from Jan. 2016 - Check www.ledalite.com for ongoing updates.
Philips Ledalite Linear & Cove Fluorescent Luminaires - Quickship Items
Limit of 500 linear ft per release
Sona (77)
Centris (95)
Chopstick (75)
Sync (74)
Verge (76)
Voice (73)
Jump (12)
Achieva (88)
Thrive (72)
InCove II (38)
Suspended/
Wall
Suspended/
Wall
Suspended/
Wall
Suspended
Suspended
Suspended/
Surface/Wall
Suspended/
Surface
Suspended
Suspended
Cove
D/I White Louver,
D/I Semi-Spec
Louver,
Semi-Indirect
Round Perf
Indirect,
Semi-Indirect
Round Perf,
D/I Round Perf
Semi-Indirect
Direct/Indirect
Direct/Indirect
Direct/Indirect
Direct
D/I White Louver,
D/I Semi-Spec
Louver
Direct/Indirect
Asymmetric
YES
N/A
Product Family
Mounting
Distribution
Light Source
T5 (28W)
YES
N/A
YES
YES
T5HO (54W)
YES
T8 (32W)
N/A
YES
Wiring Configuration* (Note: ALL luminaires are available with 1cct, 1cct with Emergency, 1cct with Battery Pack, 2cct, 2cct with Emergency & 2cct with Battery Pack - See below for others)
1cct dimming
(0-10V Standard)
YES
T5/T5HO only
YES
YES
N/A
YES
Specialty Ballasts
347V T8 32W
(non dim)
YES
347V T5HO 54W
(non dim)
End Caps
Flat
NO
YES
Sculpted
YES
NO
N/A
NO
YES
YES
N/A
NO
N/A
*Note: Not all wiring configurations are available with all light source options. Consult factory for full list of available options. Note: White & titanium finishes only. Standard downlight kits available. Fluorescent lamps are not supplied.
Exclusions:
•Response sensors & Actilume day/occupancy sensors
•All non-standard, 3rd party ballasts, drivers and components
•Prior Hold for Release or Do Not Ship Before orders
Please note: Due to continuing product improvements, Philips Ledalite reserves the right to change product specifications without notice.
Information current from Jan. 2016 - Check www.ledalite.com for ongoing updates.
Philips Ledalite Linear LED Luminaires - Quickship Items
Limit of 500 linear ft per release
FloatPlane (24)
Chopstick (75)
Sync (74)
BoldPlay (78)
Verge (76)
Jump (12)
Curve & Edge
Suspended
Suspended
Suspended
Suspended
Suspended
Suspended/Surface
Direct/Indirect
Semi-Indirect
Direct/Indirect
Direct/Indirect
Direct/Indirect
Direct
Product Family
Mounting
Distribution
Wiring Configuration*
YES
- 1cct
- 1cct w/emergency
- 1cct dimming
(0-10V Standard)
End Caps
Flat
N/A
YES
NO
Sculpted
YES
NO
YES
* Note: Not all wiring configurations are available with all LED light source options. Consult factory for full list of available options. Inclusions:
•3000K, 3500K, 4000K color temps
•120-277V
•White & Titanium finishes only
•Standard downlight kits
Exclusions:
•Response sensors & Actilume day/occupancy sensors
•1cct with battery pack
•Wall mount
•All non-standard, 3rd party ballasts, drivers and components
•Prior Hold for Release or Do Not Ship Before orders
Please note: Due to continuing product improvements, Philips Ledalite reserves the right to change product specifications without notice.
Information current from Jan. 2016 - Check www.ledalite.com for ongoing updates.
Project:
Location:
Cat. No:
Type:
Notes:
Linear
Suspended
Mounting Options
Mount Type
Powerfeed Options
Detailed descriptions on reverse.
120V, 277V or 347V
All luminaires are pre-wired to
module ends.
Aircraft Cable Mounts
A1
Non-accessible ceiling, 0˚-15˚ Slope Mount
A3
Non-accessible ceiling, 0˚-90˚ Slope Mount
A2
A5
A6-1
A6-2
A6-3 T-grid Fixed Position Mount
T-grid 24" Span Mount (non tegular tile only)
T-grid On-grid Mount 15/16" (non tegular tile only)
T-grid On-grid Mount 9/16" (non tegular tile only)
T-grid On-grid Mount 9/16" x 15/16" (slot tee & tegular tile)
Contractor can cut cable to any length. Factory cables available in
nominal lengths of 24", 48", 96", 144" or 240".
Use this table to specify required mounting hardware & suspension
lengths (distance from ceiling to top of the fixture) for each fixture type.
Mount Type
• Max. 10 amps in a 1 circuit application
• Max. 5 amps per circuit in a 2 circuit
application with shared neutral
• Max. 600V
• 120V, 277V or 347V applications
4 Conductor
• Good for 2 circuit feeds
or a 1 circuit feed with a
battery pack hot lead
Suspension Length
Fixture Type
Power Cords
Suspension Length (inches)
5 Conductor
• Good for 1 circuit feed
with dimming or 2 circuit
feeds
7 Conductor
• Good for 3 circuit feeds
or 2 circuit feeds with a
battery pack hot lead
Electrical Connections
(standard with all products)
Quick-wire connectors
• Installed at one end
of each module
mounting_suspended 10/15 page 1 of 2
Non-accessible ceilings
T-grid ceilings
A1 0˚–15˚ Slope Mount
A2 Fixed Position Mount
non-power
power
Designed for flat or gently sloping non-accessible ceilings
(0˚–15˚ slope) where the electrical box is pre-installed either
surface mounted or recessed in the ceiling. System conceals
mounting hardware to provide a clean, finished look.
• Stranded aircraft cable with full vertical adjustment at fixture
• 4" octagonal box (supplied by others)
• Canopy is 5-1/4" diameter x 3/4" high for power & nonpower mounts
• Optional cover ring available for surface mounted power
(not shown)
• Optional Chicago Plenum version available (specify Mount
Type A4)
A3 0˚–90˚ Slope Mount
non-power
power
Versatile mount designed for flat or sloped non-accessible
ceilings (0˚–90˚ slope) where the electrical box is pre-installed
either surface mounted or recessed in the ceiling. Exposed
mounting hardware provides more industrial look.
• Mountable on 0˚–90˚ sloped ceiling
• Stranded aircraft cable with full vertical adjustment at fixture
• 4" octagonal box (supplied by others)
• Canopy for power is 5-1/4" diameter x 3/4" high
• Mount bracket is 2-3/4" wide x 2" high
• Optional canopy collar included to conceal exposed
4" octagonal box
Fixed Position Mount (standard tee,
slot tee, tegular tile) uses fixed
placement of 1/4"–20 threaded rod
(supplied by others) and integral
non-power
power
electrical box (supplied by Philips
Ledalite) to work with all T-grid ceiling types.
• Stranded aircraft cable with full vertical adjustment at fixture
• Canopy is 3" diameter x 7/32" high for power and non-power mounts
• Tile cut-out is 2-1/2" diameter for power or 3/4" diameter for non-power
• 1/4"–20 threaded rod (supplied by others)
A5 24" T-grid Span Mount
24" T-grid Span Mount allows
flexible placement of luminaires in
the tile. Good for products with
off-grid mounts or spaces where
ducting and/or other structural
non-power
power
barriers require mounting flexibility.
• Aligned by T-grid and secured to structure
• Adjusts to both 1" and 1-1/2" high T-grid ceiling types*
• Stranded aircraft cable with full vertical adjustment at fixture
• 4" square box (supplied by others)
• Canopy is 3" diameter x 7/32" high for power and non-power mounts
• Tile cut-out is 2-1/2" diameter for power and non-power mounts
*Note: Consult factory for non-standard ceiling types and tiles.
A6** On-grid Mount
On-grid Mount system (standard
tee, slot tee) clips directly to tee
in either orientation. Quick and
simple to install.
• Supported by T-grid and
non-power
power
secured to structure
• Stranded aircraft cable with full vertical adjustment at fixture
• 4" square box (supplied by others)
• Canopy is 3-3/4" diameter x 7/32" high for power and non-power mounts
• 65 lbs maximum static load
Note: Supports T-grid (15/16" and 9/16") and Slot T-grid (9/16" x 5/16") ceiling types. Compatible
with Ledalite fixtures that provide 4', 8' or 12' mount spacing. To meet seismic requirements,
additional tie-offs may be required. Consult local codes.
**Select applicable size/tile type:
A6-1 On-grid 15/16" (non tegular tile only)
A6-2 On-grid 9/16" (non tegular tile only)
A6-3 On-grid 9/16" x 5/16" (slot tee &
© 2015 Koninklijke Philips N.V. All rights reserved.
Philips reserves the right to make changes in specifications
and/or to discontinue any product at any time without notice
or obligation and will not be liable for any consequences
resulting from the use of this publication.
philips.com/luminaires
tegular tile)
Philips Lighting, North America Corporation
200 Franklin Square Drive, Somerset, NJ 08873
Tel. 855-486-2216
Philips Lighting Canada Ltd.
281 Hillmount Rd, Markham, ON, Canada L6C 2S3
Tel. 800-668-9008