HOUSING
ENCLOSURES_
WS1
WS5
WS2
WS9
WS6
WARRIOR™ SERIES
Discrete Vandal-Resistant Camera Systems
Moog Videolarm’s Warrior™ Series offers a inconspicuous solution to video surveillance. The discrete and rugged vandal-resistant body of the
Warrior Series is ideal for monitoring a high risk area in a compact and durable package. Dispite the units size the fixed or auto-iris lens camera
models pack a definate punch ranging from 3.6mm to 8mm utilizing a high resolution color camera system.
Key Features
• Rugged vandal-resistant cast aluminum body
• 3” polycarbonate dome
• Outdoor models available with heater/blower system
CERTIFIED
• High resolution color camera system; with fixed or
auto-iris lens models
• NVT twisted pair models available
• Variety of mounts and accessories available
WARRIOR SERIES_
3” Dome Surface Mount:
Key Features
• Includes a choice of cameras
• Heavy-duty cast aluminum construction
• Fully adjustable 3-axis camera bracket, allowing 360º
pan,180º tilt
• Environmentally sealed - designed for NEMA 4, IP65
• Clear or tinted polycarbonate dome with liner
• Tamper-resistant fasteners
WS1
The Warrior WS1 is built to take punishment and give years of dependable service. Perfect for indoor
or outdoor locations such as schools, correctional facilities, airports, hospitals and more. The WS1 is
available with either fixed or vari-focal lens. And the camera itself is protected by a high-impact,
polycarbonate dome with liner that can withstand the impact of a sledgehammer.
SPECIFICATIONS:
Electrical Specifications
Input Voltage:
15 - 30 VDC or 20 - 28 VAC
Video Connector:
BNC
General Specifications
Cable Entry:
One 3/4” threaded side conduit opening One 1/2”
threaded base conduit opening
Pan/Tilt:
Manual; 360º pan / 180º tilt
Environmental Specifications
Temperature Range:
Construction
Engineering Specifications (WS1)
The WS1 housing is manufactured from 3/16” thick cast aluminum with an off-white powder coat finish and is environmentally
sealed. One 3/4” conduit opening is located on a side of the housing and one 1/2” conduit opening is located on the back. The
dome is constructed of 1/8” thick polycarbonate measuring 3.875” in diameter. A including a liner, along with a lanyard to
keep the dome from dropping when opened for service. A camera bracket with three-way adjustment is included. Adjustments
include 360º pan of the entire bracket, 180º tilt of the lens bracket, and a 90º tilt of the lower portion of the bracket in instances
where the entire housing must be mounted at an angle.
3” Dome Recessed Mount:
WS2
0º to 120º F
3/16” thick cast aluminum 1/8” polycarbonate dome
Finish:
Off-white powder coat
Dimensions
Base:
5.25” (H) x 5.25” (W) x 4” (D)
Dome:
3.875” diameter
Key Features
•
•
•
•
•
•
•
Includes a choice of cameras
Cast aluminum construction
Fully adjustable 3-axis camera bracket, allowing 360º pan,180º tilt
Environmentally sealed
Clear or tinted dome with liner
Mounts to standard double gang box (not provided)
Tamper-resistant fasteners
The WS2 is the recessed version of the WS1. It’s designed for ceiling or wall mounting and, with its
recessed body, offers a low profile. Besides use in indoor applications such as schools or hospitals, the
environmentally sealed body allows outdoor use in areas such as loading docks or parking garages.
The back box and lower body of the WS2 are constructed of cast aluminum, while the dome is made
from high-impact polycarbonate and comes with liner. The WS2 comes complete with a color camera,
available with either fixed or vari-focal lens.
SPECIFICATIONS:
Electrical Specifications
Input Voltage:
15 - 30 VDC or 20 - 28 VAC
Video Connector:
BNC
General Specifications
Pan/Tilt:
Environmental Specifications
Temperature Range:
0º to 120º F
Construction
Engineering Specifications (WS1)
The WS2 housing back box and lower body are both manufactured from 3/16” thick cast aluminum with an off-white powder
coat finish. The housing is environmentally sealed. The dome is constructed of 1/8” thick polycarbonate. A camera bracket with
three-way adjustment is included. Adjustments include 360º pan of the entire bracket, 180º tilt of the lens bracket, and a 90º
tilt of the lower portion of the bracket in instances where the entire housing must be mounted at an angle. To fully conceal the
back box the use of a standard double gang box is recommended. Available with a high resolution color camera; fixed, fixed iris
vari-focal or auto iris vari-focal lens.
Manual; 360º pan / 180º tilt
3/16” thick cast aluminum 1/8” polycarbonate dome
Finish:
Off-white powder coat
Dimensions
Base:
5.25” (H) x 5.25” (W) x 4” (D)
Dome:
3.875” diameter
© 2009-2010, Moog Videolarm, Inc. All Rights Reserved
WARRIOR SERIES_
Recessed Wall Mount:
WS5
Available with off-white, stainless steel
or brass face plate!
Key Features
•
•
•
•
•
•
•
•
SPECIFICATIONS:
Includes a choice of cameras
12-gauge steel front plate, powder coated
Adjustable camera bracket, allowing 15º tilt above and below horizon
Electrical Specifications
Optional stainless steel or brass face plate
15 - 30 VDC or 20 - 28 VAC
Input Voltage:
Window Guard™ paint shield
BNC
Video Connector:
3.6mm and 2.5mm fixed lens
General Specifications
3/4” and 1/2” conduit knockouts in 15-gauge steel double gang box
3/4” and 1/2” conduits on sides and base of
Tamper-resistant fasteners
Cable Entry:
double gang box
The WS5 is a recessed wall unit featuring a 15-gauge steel double gang box or a 12-gauge steel front
plate, powder coated front cover. The window is 1/8” thick polycarbonate with a scratch resistant
coating and Moog Videolarm’s Window Guard™ paint shield. These combine to offer durable protection
for camera equipment. A double gang box with multiple conduit knockouts houses the camera inside
the wall. The WS5 includes a choice of cameras. This housing is perfect for indoor locations in schools,
hospitals, police and correctional facilities...anywhere tough but discreet surveillance is needed.
Engineering Specifications (WS1)
The WS5 housing includes a 15-gauge steel double gang box with multiple 3/4” and 1/2” conduit knockouts. The front cover is
a 12-gauge steel, powder coated in off-white. The viewing window is constructed of 1/8” polycarbonate and includes a scratch
resistant coating and Window Guard™ paint shield. A metal mounting bracket is included which will allow 15º manual tilt above
and below the horizon. Available with a high resolution color fixed lens camera.
Corner Mount Housing:
WS6
Key Features
•
•
•
•
•
•
•
•
•
Pan/Tilt:
Manual; 15º tilt above and below horizon
Environmental Specifications
Temperature Range:
0˚ - 110˚ F
Construction
12-gauge steel front cover 15-gauge steel double gang box
Metal mounting bracket 1/8” polycarbonate viewing window
Finish:
Off-white powder coat
Dimensions
Unit:
5 (H) x 5” (W) x.375” (D)
Window:
2.25” (H) x 1.25” (W)
Available with off-white, stainless steel
or brass face plate!
Compact design
Includes a choice of cameras
12-gauge steel front plate, powder coated
Optional stainless steel or brass face plate
16-gauge steel back box
Adjustable camera bracket, allowing tilt
Tough, 1/8” polycarbonate viewing window
Conduit knockouts in the top, side, and bottom
Vandal-proof paint shield (patent pending)
Designed for indoor applications, the Warrior 6 offers discreet surveillance in a compact package.
A 12-gauge steel front cover and polycarbonate window with a scratch resistant coating protect
camera equipment, while the 16-gauge steel back box allows wiring access through either the top,
side or bottom. The Warrior 6 comes complete with a choice of cameras. The sturdy construction
and small size make it perfect in applications such as hospitals, schools, government buildings, and
correctional facilities.
Engineering Specifications (WS1)
The Warrior 6 housing includes a 16-gauge steel backbox with 3/4” conduit knockouts. The front cover is 12-gauge steel,
powder coated in off-white. There is an optional stainless steel or brass front plage. The viewing window is constructed of 1/8”
polycarbonate and includes a scratch resistant coating and paint shield for high vandalism installations. A metal camera
mounting bracket is included, allowing from 10º to 50º viewing angle. Available with a high resolution color fixed lens camera.
500-698 + 08-06-2010
Product and company names listed are trademarks or trade names of their respective companies.
SPECIFICATIONS:
Electrical Specifications
Input Voltage:
15 - 30 VDC or 20 - 28 VAC
Video Connector:
BNC
General Specifications
Cable Entry:
Conduits on top, side, and bottom
Pan/Tilt:
Manual
Environmental Specifications
Temperature Range:
0˚ - 110˚ F
Construction
12-gauge steel front cover 16-gauge steel back box
Metal mounting bracket 1/8” polycarbonate viewing window
Finish:
Off-white powder coat
Dimensions
Unit:
3” (H) x 6.5” (W) x 5” (D)
Window:
2.25” diameter
Moog Videolarm, 2525 Park Central Boulevard, Decatur, GA 30035 USA + 1.800.554.1124 www.videolarm.com
WARRIOR SERIES_
Bullet-Resistant, Outdoor IR Camera System:
SPECIFICATIONS:
Key Features
•
•
•
•
Hi-res color camera, 470 lines of resolution
IR LED array for nighttime viewing
Ultra hard grade aluminum body, bullet resistant
IP55 for water resistance
Electrical Specifications
Input Voltage:
12VDC
Video Connector:
BNC
Power Consumption:
9.6W
Current Draw:
400 mA
Camera Specifications
WS9
Moog Videolarm’s Warrior WS9 is perfect for outdoor applications where tough, bullet-resistant
protection is needed. The ultra hard grade aluminum body of the WS9 protects the camera from assault
by a 12-gauge shotgun or 9mm pistol. The housing is also weather resistant, with an IP55 rating. A hires color camera is included with the WS9, an IR LED array surrounding the window allows nighttime
viewing up to 50 feet. The mount bracket can be configured for either wall or ceiling applications.
Engineering Specifications (WS1)
The outdoor housing is constructed of hard grade aluminum, and is capable of withstanding fire from a 12-gauge shotgun or
9mm handgun. It’s weather resistant, with an IP55 rating. The camera is a high resolution color, with 470 TV lines of resolution.
An infrared LED array is included with the housing to allow night viewing by the camera. The mount of the housing is capable of
either wall or ceiling mount configuration.
Imager:
1/3” CCD
Sync System:
Internal
Horizontal Resolution
470 TV Lines
Signal to Noise Ratio
More than 56 dB (AGC off)
Minimum Illumination
0.8 Lux (f1.2), 0 Lux (IR on)
Video Output
1.0 Vp-p 75 ohm composite
Lens:
4.3mm
Gain Control:
Auto
IR Distrance:
50 feet (15 meters)
White Balance:
Auto
Environmental Specifications
Temperature Range:
-4˚ to +122˚ F
Construction
Ultra hard grade aluminum
Dimensions
Base:
2525 Park Central Boulevard, Decatur, GA 30035 USA
(800) 554.1124 Fax: 770.987.9705
videolarm.com
4.75” (H) x 5.625” (W) x 3.5” (D)