Toilet Grab Rails
Metlam is a proud wholly
Australian owned company
Code
MLR 101 & MLR 102 Series
Material
Mounting
Finish/Specify
#304 Stainless Steel - 32mmØ
Concealed Fix - 78mmØ Mount
MLR 101: Left Hand - Satin Stainless Steel (Shown)
MLR 102: Right Hand - Satin Stainless Steel
MLR 101 W: Left Hand - White Powder Coat
MLR 102 W: Right Hand - White Powder Coat
Includes 300mm Rail
Note
30° Flush Mount
Side Wall & Cistern Grab Rail Set
840
700
300
740
X
Bend X to be 100 - 150mm
forward of pan rim
800/810
From floor to
top of rail
Fully Compliant with AS1428. 1
Code
MLR 103 & MLR 104 Series
Material
Mounting
Finish/Specify
#304 Stainless Steel - 32mmØ
Concealed Fix - 78mmØ Mount
MLR 103: Left Hand - Satin Stainless Steel (Shown)
MLR 104: Right Hand - Satin Stainless Steel
MLR 103 W: Left Hand - White Powder Coat
MLR 104 W: Right Hand - White Powder Coat
Includes 300mm Rail
Note
850
300
90° Flush Mount
Side Wall & Cistern Grab Rail Set
600
950
X
Bend X to be 200 - 250mm
forward of pan rim
800/810
From floor to
top of rail
Fully Compliant with AS1428. 1
Code
MLR 105 & MLR 106 Series
Material
Mounting
Finish/Specify
#304 Stainless Steel - 32mmØ
Concealed Fix - 78mmØ Mount
MLR 105: Left Hand - Satin Stainless Steel (Shown)
MLR 106: Right Hand - Satin Stainless Steel
MLR 105 W: Left Hand - White Powder Coat
MLR 106 W: Right Hand - White Powder Coat
Includes 300mm Rail
Note
30° Flush Mount
Rear/Side Wall & Cistern Grab Rail Set
850
700
300
950
800/810
From floor to
top of rail
X
Bend X to be 100 - 150mm
forward of pan rim
Fully Compliant with AS1428. 1
The photographs and line drawings of the products in this catalogue are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Metlam Australia Pty Ltd
Tel: 61 3 5428 4618
Fax: 61 3 5428 1780
Section 2 - 01
Email: sales@metlam.com.au
www.metlam.com.au
Toilet Wrap Around Grab Rails
Metlam is a proud wholly
Australian owned company
Code
MLR 113 & MLR 114 Series
Material
Mounting
Rail Standoff
Mounting Point
Finish/Specify
#304 Stainless Steel - 32mmØ
Concealed Fix - 78mmØ Mount
60mm
Horizontal @ 170mm Off Wall including Standoff
MLR 113: Left Hand - Satin Stainless Steel (Shown)
MLR 114: Right Hand - Satin Stainless Steel
MLR 113 W: Left Hand - White Powder Coat
MLR 114 W: Right Hand - White Powder Coat
30° Flush Mount
Wrap Around Grab Rail
900
1100
700
170
X
800/810
From floor to
top of rail
Bend X to be 100 - 150mm
forward of pan rim
Fully Compliant with AS1428. 1
Code
MLR 115 & MLR 116 Series
Material
Mounting
Rail Standoff
Mounting Point
Finish/Specify
#304 Stainless Steel - 32mmØ
Concealed Fix - 78mmØ Mount
60mm
Horizontal @ 170mm Off Wall including Standoff
MLR 115: Left Hand - Statin Stainless Steel (Shown)
MLR 116: Right Hand - Statin Stainless Steel
MLR 115 W: Left Hand - White Powder Coat
MLR 116 W: Right Hand - White Powder Coat
90° Flush Mount
Wrap Around Grab Rail
1025
600
1100
170
X
800/810
From floor to
top of rail
Bend X to be 200 - 250mm
forward of pan rim
Fully Compliant with AS1428. 1
The photographs and line drawings of the products in this catalogue are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Metlam Australia Pty Ltd
Tel: 61 3 5428 4618
Fax: 61 3 5428 1780
Section 2 - 02
Email: sales@metlam.com.au
www.metlam.com.au
Backrests & Grab Rail Sets
Metlam is a proud wholly
Australian owned company
Code
Straight Rail Padded Backrest
MLR 119
Material
#304 Satin Stainless Steel Frame & Mounts,
White Padded PVC Backrest
Mounting
Concealed Fix
Backrest Standoff Adjustable depth to suit installation requirements
Installation instructions provided
Note
Fully Compliant with AS1428. 1
Code
Curved Rail Padded Backrest
MLR 119 C
Material
#304 Satin Stainless Steel Frame & Mounts,
White Padded PVC Backrest
Mounting
Concealed Fix
Backrest Standoff Adjustable depth to suit installation requirements
Note
Installation instructions provided
Fully Compliant with AS1428. 1
Code
Vandal Proof Curved Backrest
MLR 119 CVP
Material
#304 Satin Stainless Steel Frame & Mounts,
#304 Satin Stainless Steel Backrest
Mounting
Concealed Fix
Backrest Standoff Adjustable depth to suit installation requirements
Note
Installation instructions provided
Fully Compliant with AS1428. 1
Description
90° Grab Rail & Backrest Sets
Description
40° Grab Rail & Backrest Sets
Material
Specify
#304 Satin Stainless Steel Frame & Mounts
MLR 120 BR RH: Right Hand Set with MLR 119 C
MLR 120 BR LH: Left Hand Set with MLR 119 C (shown)
MLR 120 BR VP RH: Right Hand Set with MLR 119 CVP
MLR 120 BR VP LH: Left Hand Set with MLR 119 CVP
Concealed Fix
Installation instructions provided
Material
Specify
#304 Satin Stainless Steel Frame & Mounts
MLR 121 BR RH: Right Hand Set with MLR 119 C
MLR 121 BR LH: Left Hand Set with MLR 119 C (shown)
MLR 121 BR VP RH: Right Hand Set with MLR 119 CVP
MLR 121 BR VP LH: Left Hand Set with MLR 119 CVP
Concealed Fix
Installation instructions provided
Mounting
Note
Mounting
Features
Fully Compliant with AS1428. 1
Fully Compliant with AS1428. 1
The photographs and line drawings of the products in this catalogue are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Metlam Australia Pty Ltd
Tel: 61 3 5428 4618
Fax: 61 3 5428 1780
Section 2 - 02A
Email: sales@metlam.com.au
www.metlam.com.au
Toilet Pull Down Grab Rails
Metlam is a proud wholly
Australian owned company
Code
Material
Tubing:
Mounting Bracket
& Brace:
Finish/Specify
Features
Dimensions
Overall:
Grab Rail:
Mounting Bracket:
Mounting Holes:
Note
Code
Material
Tubing:
Mounting Bracket
& Brace:
Toilet Roll Holder:
Finish/Specify
Features
Dimensions
Overall:
Grab Rail:
Toilet Roll Holder:
Pull Down Grab Rail
MLR 50 & MLR 50 W
#304 Stainless Steel - 32mmØ x 1.2mmT
Formed from #304 Stainless Steel x 2.5mmT
MLR 50: Satin Stainless Steel
MLR 50 W: White Powder Coat
Unit is Seamless Welded & Polished
850mmL x 315mmH
215mmH from outer edge to edge
104mmW x 315mmH x 30~50mmD x 2.5mmT
7 off by 8mmØ
Unit stores in upright position
MLR 50 TPH & MLR 50 TPH W
#304 Stainless Steel - 32mmØ x 1.2mmT
Pull Down Grab Rail
with Toilet Roll Holder
Formed from #304 Stainless Steel x 2.5mmT
12.5mmØ Stainless Steel Bar
MLR 50 TPH: Satin Stainless Steel
MLR 50 TPH W: White Powder Coat
Unit is Seamless Welded & Polished
850mmL x 315mmH
215mmH from outer edge to edge
168mmL with top of Holder 50mm below
underside of upper rail
Mounting Bracket: 104mmW x 315mmH x 30~50mmD x 2.5mmT
Mounting Holes:
7 off by 8mmØ
Note
Unit stores in upright position
Code
Material
Tubing:
Mounting Bracket
& Brace, NC Housing:
Toilet Roll Holder:
Finish/Specify
Features
Dimensions
Overall:
Grab Rail:
Mounting Bracket:
Mounting Holes:
Note
Code
Material
Tubing:
Mounting Bracket
& Brace, NC Housing:
Toilet Roll Holder:
Finish/Specify
Features
Dimensions
Overall:
Grab Rail:
Toilet Roll Holder:
Mounting Bracket:
Mounting Holes:
Note
MLR 50 NC Series
#304 Stainless Steel - 32mmØ x 1.2mmT
Pull Down Grab Rail
with Nurse Call
Formed from #304 Stainless Steel x 2.5mmT
12.5mmØ Stainless Steel Bar
MLR 50 NC L: Left Hand - Satin Stainless Steel
MLR 50 NC R: Right Hand - Satin Stainless Steel (Shown)
MLR 50 NC LW: Left Hand - White Powder Coat
MLR 50 NC RW: Right Hand - White Powder Coat
Unit is Seamless Welded & Polished
850mmL x 315mmH
215mmH from outer edge to edge
104mmW x 315mmH x 30~50mmD x 2.5mmT
7 off by 8mmØ
Units store in upright position
Nurse Call Button not included
MLR 50 NCTRH Series
#304 Stainless Steel - 32mmØ x 1.2mmT
Pull Down Grab Rail
with Nurse Call & Toilet Roll Holder
Formed from #304 Stainless Steel x 2.5mmT
12.5mmØ Stainless Steel Bar
MLR 50 NCTRH L: Left Hand - Satin Stainless Steel (Shown)
MLR 50 NCTRH R: Right Hand - Satin Stainless Steel
MLR 50 NCTRH LW: Left Hand - White Powder Coat
MLR 50 NCTRH RW: Right Hand - White Powder Coat
Unit is Seamless Welded & Polished
850mmL x 315mmH
215mmH from outer edge to edge
168mmL with top of Holder 50mm below
underside of upper rail
104mmW x 315mmH x 30~50mmD x 2.5mmT
7 off by 8mmØ
Units store in upright position
Nurse Call Button not included
The photographs and line drawings of the products in this catalogue are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Metlam Australia Pty Ltd
Tel: 61 3 5428 4618
Fax: 61 3 5428 1780
Section 2 - 03
Email: sales@metlam.com.au
www.metlam.com.au
Grab Rails
Metlam is a proud wholly
Australian owned company
ML 327 - ML 337 Series
Material
Finish/Specify
#304 Stainless Steel - 32mmØ
Satin Stainless Steel
White Powder Coat (W)
Concealed Fix - 78mmØ Mount
Mounting
7
A
76
90
A
DIAMETER
300
32
ML 328
350
32
ML 329
400
32
ML 330
450
32
ML 331
600
32
ML 332
750
32
ML 333
900
32
ML 334
1000
32
ML 335
1200
32
ML 336
1500
32
ML 337-18
1800
32
ML 337-21
2100
32
ML 337-24
2400
32
ML 327
5
78
LENGTH
PRODUCT
CODE
Code
78
Straight Grab Rail
ML 328
ML 337-24
Code
ML 385 - Flat Hand Rail Bracket
Code
ML 386 - Concave Hand Rail Bracket
Material
Mounting
#304 Satin Stainless Steel - 15mmØ
Concealed Fix - 65mmØ Mount
Material
Mounting
#304 Satin Stainless Steel - 15mmØ
Concealed Fix - 65mmØ Mount
23
20
58
60
112
110
65
65
90
90
Code
MLR 25 x 19 x 600 & MLR 32 x 25 x 600
Material
Mounting
#304 Satin Stainless Steel
Concealed Fix - 78mmØ Mount
78
MLR 25 x 19 x 600
Combined Grab Rail & Towel Rail
MLR 32 x 25 x 600
78
600
600
145
145
19
25
25
32
675
675
90° Ambulant Grab Rail
Code
MLR 112 & MLR 112 W
Material
Finish/Specify
#304 Stainless Steel - 32mmØ
MLR 112: Satin Stainless Steel
MLR 112 W: White Powder Coat
Concealed Fix - 78mmØ Mount
Suits Right Hand or Left Hand installation
Mounting
Note
450
450
Bend X must be 100 -150mm
forward of pan rim X
800/810
From floor to
top of rail
Note: Products depicted on this page may be subject to Building Code of Australia, local Council or other Regulatory Authority requirements
with regard to location and height of installation, and is the responsibility of the specifier/installer to determine compliance if applicable.
The photographs and line drawings of the products in this catalogue are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Metlam Australia Pty Ltd
Tel: 61 3 5428 4618
Fax: 61 3 5428 1780
Email: sales@metlam.com.au
Section 2 - 04
www.metlam.com.au
Shower Grab Rails & Shower Kits
Metlam is a proud wholly
Australian owned company
Code
MLR 107 & MLR 108 Series
Material
Mounting
Finish/Specify
#304 Stainless Steel - 32mmØ
Concealed Fix - 78mmØ Mount
MLR 107: Left Hand - Satin Stainless Steel
MLR 108: Right Hand - Satin Stainless Steel (Shown)
MLR 107 W: Left Hand - White Powder Coat
MLR 108 W: Right Hand - White Powder Coat
Offset Flush Mount
Shower Grab Rail
1100
500
700
800/810
From floor to
top of rail
Fully Compliant with AS1428. 1
Code
MLR 109 & MLR 110 Series
Material
Mounting
Finish/Specify
#304 Stainless Steel - 32mmØ
Concealed Fix - 78mmØ Mount
MLR 109: Left Hand - Satin Stainless Steel
MLR 110: Right Hand - Satin Stainless Steel (Shown)
MLR 109 W: Left Hand - White Powder Coat
MLR 110 W: Right Hand - White Powder Coat
Corner Wall Flush Mount
Shower Grab Rail
750
750
170
800/810
From floor to
top of rail
32mm Grab Rail Shower Kits
Code
ML 22-6504
Material
Chrome/Black Hand Shower
Black 2000mm High Pressure Hose
Chrome Elbow & Grey/Chrome Grab Rail Slider
Code
ML 22-6511
Material
White Hand Shower
White 2000mm High Pressure Hose
White Elbow & White Grab Rail Slider
Code
ML 22-6566
Material
Chrome/Black Hand Shower
Chrome 2000mm High Pressure Hose
Chrome Elbow & Grey/Chrome Grab Rail Slider
Other Specifications
Shower Heads have MAXIMUM flow rate of 9 Litres per minute
Kits have Watermark WMKT21090
Hoses are standard pressure of 150~350Kpa as per AS/NZS 3662.2006
All components are available as separate items
A joint government and industry program
ML 22-6504
When tested in accordance with Standard AS/NZS 6400
www.waterrating.gov.au
The photographs and line drawings of the products in this catalogue are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Metlam Australia Pty Ltd
Tel: 61 3 5428 4618
Fax: 61 3 5428 1780
Section 2 - 05
Email: sales@metlam.com.au
www.metlam.com.au
Shower Seats
Metlam is a proud wholly
Australian owned company
Folding Shower Seat
Code
ML 990-18
Material
#304 Satin Stainless Steel Frame - 25mmØ Tube
13mmT White Compact Laminate Slats
with Black Edging
Surface Mount Visible Fix
Mounting
WALL
375
470
70
13
85
258
158
208
40
25
360
212 230
475
180
25
57
76
FLOOR
25mmØ Stainless Steel Tubing Frame
Economy Shower Seat
Code
ML 990-19
Material
#304 Satin Stainless Steel Frame - 25mmØ Tube
13mmT White Compact Laminate Single Piece
Seat with Black Edging & Drainage Slots
Surface Mount Visible Fix
Mounting
460
360
40
WALL
13
85
40
244
294
344
455
25
212 230
480
180
25mmØ Stainless Steel Tubing Frame
25
57
FLOOR
76
Fold Away Shower Seat
Code
ML 991 CL & ML 991 AS
Material
Specify
#304 Satin Stainless Steel Frame - 25mm² Tube
ML 991 CL: 13mmT White Compact Laminate
Single Piece Seat with Black Edging & Drainage Slots
ML 991 AS: White Powder Coat 8mmT Solid
Aluminium Slats
Surface Mount Visible Fix
Low profile upright storage position
Mounting
Features
960
400
360
8
69
205
110
Compact Laminate Sample
26
348
25mm² Stainless Steel Tubing Frame
348
Fold Away Shower Seat
Code
ML 992 CL & ML 992 AS
Material
Specify
#304 Satin Stainless Steel Frame - 25mm² Tube
ML 992 CL: 13mmT White Compact Laminate
Single Piece Seat with Black Edging & Drainage Slots
ML 992 AS: White Powder Coat 8mmT Solid
Aluminium Slats
Surface Mount Visible Fix
Low profile upright storage position
Mounting
Features
355
Fully Compliant with AS1428. 1
315
265
8
69
205
110
26
250
Compact Laminate Sample
25mm² Stainless Steel Tubing Frame
The photographs and line drawings of the products in this catalogue are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Metlam Australia Pty Ltd
Tel: 61 3 5428 4618
Fax: 61 3 5428 1780
Section 2 - 06
Email: sales@metlam.com.au
www.metlam.com.au
Shower Seats
Metlam is a proud wholly
Australian owned company
Folding Shower Seat
Code
ML 993 CL & ML 993 AS
Material
Specify
#304 Satin Stainless Steel Frame - 25mm² Tube
ML 993 CL: 13mmT White Compact Laminate
Single Piece Seat with Black Edging & Drainage Slots
ML 993 AS: White Powder Coat 8mmT
Solid Aluminium Slats
Surface Mount Visible Fix
Low profile upright storage position
Mounting
Features
600
400
360
8
69
205
110
26
25mm² Stainless Steel Tubing Frame
399
Compact Laminate Sample
Folding Shower Seat
Code
ML 994 CL & ML 994 AS
Material
Specify
#304 Satin Stainless Steel Frame - 25mmØ Tube
ML 994 CL: 13mmT White Compact Laminate Single
Piece Seat with Black Edging & Drainage Slots
ML 994 AS: White Powder Coat 8mmT Solid
Aluminium Slats & #304 Satin Stainless Steel
Rear Mounting/Hinge Bracket - 60mmD
Surface Mount Visible Fix
Fold away lockable support leg
Low profile upright storage position
Mounting
Features
960
23
8
400
330
54
275
241
212
Lock-In Mounting Bracket
90
260
260
42
Fully Compliant with AS1428. 1
75
Folding Shower Seat
Code
ML 995
Material
#304 Satin Stainless Steel Frame - 25mm² Tube
13mmT White Compact Laminate Single Piece Seat
with Black Edging & Drainage Slots
Surface Mount Visible Fix
Fold away support legs
Low profile upright storage position
Mounting
Features
Compact Laminate Sample
25mmØ Stainless Steel Tubing Frame
90
WALL
960
400
380
13
85
185
476
350
10mmØ Holes in
Rear Wall Brackets Only
695
228
25mm² Stainless Steel Tubing Frame
Easily folds away for
space saving storage
113
FLOOR
Fully Compliant with AS1428. 1
The photographs and line drawings of the products in this catalogue are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Metlam Australia Pty Ltd
Tel: 61 3 5428 4618
Fax: 61 3 5428 1780
Section 2 - 07
Email: sales@metlam.com.au
www.metlam.com.au
Shower/Bed Curtain System & Hooks
Metlam is a proud wholly
Australian owned company
Shower/Bed Curtain System
Code
ML CTS Series
Material
Finish/Specify
Note
Anodised Aluminium
Clear Anodised Aluminium
White & Other Powder Coat Colours available
Measurements: A, B & C (refer diagram)
Profile: D or E (refer diagrams)
Concealed Screw Fix
Track, Ceiling Suspension Rod, Hooks &
Wall Mount Brackets
Shower/Bed Curtains also available
Code
ML 4156
Material
Finish
Mounting
#304 Stainless Steel
Satin Stainless Steel
Visible Screw Fix
Size/Specify
Mounting
Components
C
A
B
E - Macro Profile:
20mmW x 38mmH
D - Micro Profile:
20mmW x 25mmH
3
48
112
10
66
Code
ML 4155
Material
Finish
Mounting
#304 Stainless Steel
Satin Stainless Steel
Visible Screw Fix
Catheter/IV Hook
32
Equipment Hook
135
30
50
6
10
65
200
Code
ML 216 S & ML 216 B
Material
Finish/Specify
#304 Stainless Steel
ML 216 S: Satin Stainless Steel
ML 216 B: Polished Stainless Steel
Concealed Screw Fix
Mounting
16
76Ø
71
12
Collapsible Coat Hook
Code
ML 2117
Material
Finish
Mounting
Features
#304 Stainless Steel
Satin Stainless Steel
Visible Screw Fix
Nominal 12kg Load Capacity
109
31
76
ML 2122 & ML 2123
Material
#304 Stainless Steel
Finish
Satin Stainless Steel
Mounting/Specify ML 2122: Concealed Screw Fix
ML 2123: Visible Screw Fix
Features
Nominal 12kg Load Capacity
(NATA Laboratory Tested)
25
10
Collapsible Coat Hook
108 x 108
Code
Heavy Duty Coat Hook
15
22
34
The photographs and line drawings of the products in this catalogue are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Metlam Australia Pty Ltd
Tel: 61 3 5428 4618
Fax: 61 3 5428 1780
Section 2 - 08
Email: sales@metlam.com.au
www.metlam.com.au