Type:
Project:
Options:
Modified:
Luminaire:
Fixture EPA:
Optional Tenon: R23⁄8"φ x 31⁄2" H
GCO: R
GFI: R
Approval:
926 Tapered round base pole
Wall thickness: .125"
Shaft: Extruded from all new seamless 6063 aluminum alloy tubing,
heat treated to a T-6 condition.
Bell base: Round cast aluminum A356 alloy, heat treated to
a T-6 condition. Anchor base and shaft continuously welded
internally - no exposed welds..
3"φ
Anchor base: Internal anchor base casting accepts bell base of pole.
Four (4) socket head stainless steel bolts threaded into stainless steel
inserts retain pole.
Access door: Flush, covered wiring access holesis provided, centered
273⁄8" above base. Opening is 4" x 111⁄4".
Anchorage: Supplied with 8986A anchorage.
16' - 77⁄8"
GCO or GFI: Standard GCO/GFI location inside the handhole.
Disclaimer
BEGA-US warrants the specific anchor bolts and pole combination
according to the product number(s) and description(s) indicated
on this submittal sheet. Structural changes to the pole requested
by the customer, including changes to pole length, may affect the
compatibility of the anchor bolts and corresponding poles. BEGA-US
is not responsible for the incompatibility of the anchor bolts and poles
resulting from such structural changes without review by the BEGA-US
engineering department. This includes, but is not limited to, any labor
charges, charges for replacement materials and shipping.
Pole wind load rating:
MPH: 70 80
90
100
Four (4) 3⁄4" holes
on 107⁄16" BC @90°
9" conduit opening
120
EPA: 10.5 7.4 5.4 4.0 2.5
Note: Data above assumes grade level installation and a maximum
luminaire weight of 50 lbs.
BEGA-US 1000 BEGA Way, Carpinteria, CA 93013
©Copyright BEGA-US 2012 updated 5/12
[P] 805·684·0533
153⁄4"φ
[F] 805·684·6682
Compact floodlight
Housing: Luminaire constructed of a one piece die-cast aluminum housing.
LED module paired with inner reverse-tapered casting to provide maximum heat
transfer to outer housing.
Enclosure: Optical system consists of a reflector of pure anodized aluminum.
The lens and optical assembly are secured by a die cast aluminum trim ring
using (3) stainless steel captive fasteners.
Mounting: Provided with a 1/2" I.P.S. stainless steel nipple for direct attachment
to cast boxes or other accessories.
Electrical: 30 W LED luminaire, 31 total system watts, -40° C start temperature.
Integral 120 V or 277 V electronic LED driver, 0-10 V dimming. The LED module
and driver are mounted on a removable inner assembly for easy replacement.
Standard LED color temperature is 4000K with an 80 CRI. Available in 3000K
(80 CRI); add suffix K3 to order.
Note: Due to the dynamic nature of LED technology, LED luminaire data in this
catalog is subject to change at the discretion of BEGA-US. For the most current
technical data, please refer to www.bega-us.com.
Type:
BEGA Product:
Project:
Voltage:
Color:
Options:
Modified:
Finish: These luminaires are available in four standard BEGA colors: Black
(BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate
suffix to catalog number. Custom colors supplied on special order.
CSA certified to U.S. and Canadian standards for wet locations.
Protection class IP65.
Weight: 5.0 lbs.
Luminaire Lumens: 1712
Tested in accordance with LM-79-08
A
C
B
Compact floodlight · narrow beam
7704 LED
`= beam angle
Lamp
`
A
30 W LED
26°
61À 4 81À 2 61À2 757 796
180° glare shield
B
C
louver
050
flat beam
BEGA- US 1000 BEGA Way, Carpinteria, CA 93013 ( 805 ) 684-0533 FAX ( 805 ) 566-9474 www. bega-us . com
©copyright BEGA-US 2013
Updated 01/13
Multiple pole tops for 3 floodlights
Multiple pole tops for multiple configuration of floodlights on BEGA poles. Ready for
installation for 3 floodlights.
Pole top made of extruded and die cast aluminum. The pole top slip fits a 3" O.D.
diameter pole and is secured to the pole by eight (8) stainless steel set screws.
Cannot be used on standard BEGA poles with tenons, consult factory for custom
pole options. Floodlights are attached to the cross beam with a rotatable, die cast
aluminum, clamping plate with two M8 screws for attachment of the floodlight yoke.
The plates can be rotated around the pole top in 90° increments and have a 1 ⁄ 2"
threaded cord seal for floodlight cable entry. Floodlights can be rotated 360° on the
clamping plate. Removable, fully gasketed, cover plates are provided for access
inside the cross beam.
Type:
BEGA Product:
Project:
Voltage:
Color:
Options:
Modified:
Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ);
Silver (SLV)). To specify, add appropriate suffix to catalog number. Custom colors
supplied on special order.
Note: Consideration must be given by the designer/specifier to assure the adequacy
of pole design to safely support the wind load of pole top with floodlights. Light pole
design requires consideration of field conditions such as (but not limited to) wind
zone, height, and loading. BEGA is not responsible with compatibility for use with
poles by others.
B
A
763
Pole top for 3 floodlights
Pole top
Insert depth
A
B
EPA
Ø 3"
5 7/8
69 1/2
7 11/16
1.5
BEGA- US 1000 BEGA Way, Carpinteria, CA 93013 ( 805 ) 684-0533 FAX ( 805 ) 566-9474 www. bega-us . com
©copyright BEGA-US 2010
Updated 3/10
G9
DELTA STAR™
PROJECT:
TYPE:
CATALOG
NUMBER:
NOTES:
CATALOG NUMBER LOGIC
DS
Example
-
LED
DS
- LED - e22 -
SP
- BZW -
12
-
11
-
A
- 360SL
Material
Blank - Aluminum
B - Brass
S - Stainless Steel
Series
DS - Delta Star™
Source
LED - ‘e’ Technology with Integral Driver
LED Type
e22 - 8WLED/3K
e23 - 8WLED/4K
e24 - 8WLED/Red
e25 - 8WLED/Green
e26 - 8WLED/Blue
e27 - 8WLED/Amber
Optics*
NSP - Narrow Spot (Red Indicator)
SP - Spot (Green Indicator)
MFL - Medium Flood (Yellow Indicator)
WFL - Wide Flood (Blue Indicator)
Finish
Aluminum & Brass Finish
Powder Coat Color
Satin
Bronze
Brass Finish
Wrinkle
BZP
Black
BLP
BZW
BLW
Machined
MAC
Polished
POL
MitiqueTM
MIT
Stainless Finish
White (Gloss)
WHP
WHW
Aluminum
SAP
—
Polished
POL
Verde
—
VER
Brushed
BRU
Machined
MAC
Interior Use Only
Also available in Premium Finishes
See submittal SUB-1439-00
Lens Type
12 - Soft Focus Lens
13 - Rectilinear Lens
Shielding
11 - Honeycomb Baffle
Cap Style
A - 45°
B - 90°
D -
45°
less Weep Hole
( Interior Use Only)
E -
90°
less Weep Hole
( Interior Use Only)
Option
360SL - 360SL™ Rotational Knuckle Mounting System
LM79 DATA
L70 DATA
BK No.
e22
e23
e24
e25
e26
e27
CCT (Typ.)
3100K
4100K
Red (627nm)
Green (530nm)
Blue (470nm)
Amber (590nm)
(Typ.)
8.4
8.4
7.9
8.4
8.4
7.9
*OPTICAL DATA
Minimum Rated Life (hrs.)
Input Watts
CRI (Typ.)
80
66
~
~
~
~
B-K LIGHTING
70% of initial lumens (L70)
50,000
50,000
50,000
50,000
50,000
50,000
Beam Type
Narrow Spot
Spot
Medium Flood
Wide Flood
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
Angle
14°
18°
25°
36°
SUBMITTAL DATE
11-30-10
Visual Indicator
Red Dot
Green Dot
Yellow Dot
Blue Dot
DRAWING NUMBER
SUB000930
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE.
REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
DELTA STAR™
PROJECT:
TYPE:
“A/D” CAP
7"
(178mm)
“B/E” CAP
2 1/4" Dia.
(57mm)
6 1/2"
(165mm)
2 1/4" Dia.
(57mm)
4 3/4"
(121mm)
4 1/4"
(108mm)
1 5/8"
(41mm)
1 5/8"
(41mm)
5/8"
(16mm)
5/8"
(16mm)
360 SL™
Accessories (Configure separately)
Mounting:
Horizontal Rotation
Power Pipe™
Remote Transformers:
Power Canopy™
Tree Strap™
(Optional 360SL™ Knuckle)
Stems
Canopies
UPM™
TR Series
Power Pipe™
UPMRM™
SPECIFICATIONS
GreenSource Initiative™
Metal and packaging components are made from recycled
materials. Manufactured using renewable solar energy,
produced onsite. Returnable to manufacturer at end of life to
ensure cradle-to-cradle handling. Packaging contains no
chlorofluorocarbons (CFC's). Use of this product may qualify
for GreenSource efficacy and recycling rebate(s). Consult
www.bklighting.com/greensource for program requirements.
Materials
Furnished in Copper-Free Aluminum (Type 6061-T6), Brass
(Type 360) or Stainless Steel (Type 316).
Body
Fully machined from solid billet. Unibody design provides
enclosed, water-proof wireway and integral heat sink for
maximum component life. Integral knuckle for maximum
mechanical strength. High temperature, silicone 'O' Ring
provides water-tight seal.
Knuckle
The LOCK™ (Locking 'O' Ring Compression Knuckle) is
comprised of two components. The first is integral to the
body and features an interior, machined taper. The second is
machined from solid billet and features a second, reverse
angle taper. The resultant mechanical taper-lock allows a
full 180° vertical adjustment without the use of serrated
teeth, which inherently limit aiming. High temperature,
silicone 'O' Ring provides water-tight seal and compressive
resistance to maintain fixture position. Design withstands
73 lb. static load prior to movement to ensure decades of
optical alignment. ½” pipe thread for mounting.
Optional 360SL™ additionally provides biaxial source
control with 360° horizontal rotation in addition to vertical
adjustment.
Cap
Fully machined. Accommodates [1] lens or louver media.
Choose from 45° cutoff ('A' or 'D'), or 1” deep bezel with 90°
cutoff ('B' or 'E') cap styles. 'A' and 'B' caps include weep-hole
for water and debris drainage. 'D' and 'E' caps exclude
weep-hole and are for interior use only.
Lens
Shock resistant, tempered, glass lens is factory adhered to
fixture cap and provides hermetically sealed optical
compartment. Specify soft focus (#12) or rectilinear (#13)
lens.
BKSSL™
Integrated solid state system with 'e' technology is scalable
for field upgrade. Modular design with electrical quick
disconnects permit field maintenance. High power, forward
throw source complies with ANSI C78.377 binning
requirements. Exceeds ENERGY STAR® lumen maintenance
requirements. LM-80 certified components.
Integral non-dimming driver. Minimum 50,000 hour rated
life at 70% of initial lumens (L70). BKSSL technology
provides long life, significant energy reduction and
exceptional thermal management.
Optics
Interchangeable OPTIKIT™ modules permit field changes to
optical distribution. Color-coded for easy reference:
Narrow Spot (NSP) = Red. Spot (SP) = Green. Medium Flood
(MFL) = Yellow. Wide Flood = Blue.
Remote Transformer
For use with 12VAC (BKSSL LOGO) remote transformer.
B-K LIGHTING
Wiring
Teflon® coated, 18AWG, 600V, 250° C rated and certified to
UL 1659 standard.
Hardware
Tamper-resistant, stainless steel hardware. LOCK™ aiming
screw is additionally black oxide treated for additional
corrosion resistance.
Finish
StarGuard® (Pat. Pend.), a RoHs compliant, 15 stage
chromate-free process cleans and conversion coats
aluminum components prior to application of Class 'A' TGIC
polyester powder coating. Brass components are available
in powder coat or handcrafted metal finish. Stainless steel
components are available in handcrafted metal finish.
(Brushed finish for interior use only).
Warranty
5 year limited warranty.
Certification and Listing
ITL tested to IESNA LM-79. Lighting Facts Registration per
USDOE (www.lightingfacts.com). ETL Listed to ANSI/UL
Standard 1838 and UL Standard 8750. Certified to CAN/CSA
Standard C22.2 No. 9, CSA TIL B-58B. RoHs compliant.
Suitable for indoor or outdoor use. Suitable for use in wet
locations. Suitable for installation within 4’ of the ground.
Made in USA.
®Teflon is a registered trademark of DuPont Corporation.
®Energy Star is a registered trademark of the United States Environmental
Protection Agency.
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
SUBMITTAL DATE
11-30-10
DRAWING NUMBER
SUB000930
Other
Other
GCXV-KBY3F8
Other
GCXV-VD2NJC
Other
GCXV-X8D75X
3981 (Bright White)
4022 (Bright White)
DS-LED-e23-WFL-12
67
66
GCXV-4DFT4T
345
8.3
41
Delta Star - W. Flood
299
8.5
35
Delta Star - Rectilinear
4080 (Bright White)
4047 (Bright White)
DS-LED-e23-SP-12
68
68
DS-LED-e23-MFL-13
DS-LED-e23-MFL-12
354
8.1
43
Delta Star - Spot
346
8.2
42
Delta Star - M. Flood
Other
GCXV-5Y65SH
DS-LED-e23-NSP-12
4102 (Bright White)
68
365
8.2
44
Delta Star - N. Spot
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — The Avante 2x4 is a general lighting luminaire for large spaces including open offices,
circulation areas, classrooms, libraries, cafeterias, airport ticketing and wait areas, and numerous other
commercial applications. Static or air functions available.
Type
L-2
CONSTRUCTION — Constructed to comply with New York City electric code. Made in USA.
Housing is gloss white enamel on cold rolled steel. All edges hemmed or rounded.
All shieldings pivot on light traps and swing down for easy lamp access.
Molded light traps prevent light leaks between shielding and endplates.
2AV 2'X4' NY
All air and screw slot units supplied with screw-on tee bar clips. Ballast access is from below.
OPTICS — Twin matte white polyester powder paint finished reflectors provide uniform light distribution. Optional low brightness diffuse aluminum stepped reflectors available.
All diffusers control direct light distribution and glare by shielding lamps from direct view.
Metal diffuser staggered round holes (MDR) 52% open perforated metal with .075" diameter holes
backed with white acrylic diffuser.
Linear Fluorescent
T8 or T5
1, 2 or 3 Lamps
Straight blade louver (SBL) sides of perforated metal with staggered round holes and solid blade louvered
center. Sides and louver backed with white acrylic diffuser
ELECTRICAL — All ballasts supplied are class P, thermally protected, resetting, HPF, non-PCB, UL Listed,
CSA Certified. Ballasts are sound rated A. Standard combinations conform to UL 935.
INSTALLATION — Trims available for standard 1" and 9/16" tee bar or screw slot grids.
Fixtures can be row mounted end-to-end.
Drywall ceiling adapters available.
LISTINGS — UL Listed.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Avante is covered by one or more of the following patents: 5,988,829; 399,586; 411,641;
413,402; 2,212,513; 87,513.
Note: Specifications subject to change without notice.
Specifications
Length:
48 (121.9)
Width:
24 (61.0)
Diffuser width: 8 (20.3)
Depth:
5-1/2 (14.0)
All dimensions are inches (centimeters) unless otherwise indicated.
ORDERING INFORMATION
Example: 2AV G 2 32 MDR MVOLT GEB10IS NY3
For shortest lead times, configure product using standard options (shown in bold).
2AV
MVOLT
Series
2AV
2' wide
Trim type
Air function
G
ST
(blank)
Grid trim
Screw slot
A
Static (no air
function)
Air return/
supply
Accessories: Order as separate catalog number.
DGA24
Drywall ceiling adapter, unit installation. Use G
trim plus DGA accessory for fixture trim flange and
fixture support in plaster or plasterboard ceilings.
Number
of lamps
Lamp type
Diffuser
1
2
3
28T5
54T5HO
32
MDR
Not
included.
28W T5 (46")
54W T5HO (46")
32W T8 (48")
SBL
Voltage
Options
MVOLT1
GEB10IS
Metal diffuser,
round holes
Straight blade
louver, round holes
T8 Electronic ballast, ≤10%
THD, instant start
GEB10PS
Electronic ballast, ≤10% THD,
program med start
ALG
Acrylic litter guard2
EL14
Emergency battery pack
(nominal 300 lumens, see Life
Safety section)
GLR
Internal fast-blow fuse3
LP__
Lamped. Specify lamp type
and color
PWS1836 6' prewire, 3/8" dia., 18-gauge,
3 wires
NY3
I.B.E.W. Local 3 union made
Reflector option
ASR
Aluminum stepped reflector
Notes
1 MVOLT (120 - 277 volt), where available.
2 Refer to options and accessories section for more detailed information.
3 Must specify voltage, 120 or 277.
FLUORESCENT2AV-2x4-T8T5-NY
2AV 2X4 NY Direct/Indirect Lighting
2AV G 2 32 MDR, (2) 32W T8 lamps, 2850 lumens per lamp, s/m 1.2 (along) 1.3 (across), test no. LTL 10121
200
70˚
400
600
50˚
800
1000
1200
10˚
30˚
0˚
CP Summary
0˚
90
0˚ 1280 1280
5˚ 1279 1277
15˚ 1233 1253
25˚ 1141 1194
35˚ 1005 1101
45˚ 828
969
55˚ 623
806
65˚ 406
590
75˚ 211
291
85˚ 46
64
90
0
0
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 81 81 81
79 79 79
76 76 76
1 74 71 68
69 66 64
66 64 62
2 67 61 57
60 56 52
58 54 51
3 61 54 48
53 47 43
50 46 42
4 56 47 41
46 41 36
45 40 36
5 51 42 36
41 36 31
40 35 31
6 47 38 32
37 31 27
36 31 27
7 44 34 28
34 28 24
33 27 24
8 41 31 25
31 25 21
30 25 21
9 38 29 23
28 23 19
27 22 19
10 36 26 21
26 21 17
25 21 17
RCR
90˚
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0˚ - 30˚
1010
17.7
26.0
0˚ - 40˚
1669
29.3
43.0
0˚ - 60˚
3015
52.9
77.7
0˚ - 90˚
3882
68.1
100.0
90˚ - 180˚
0
0.0
0.0
0˚ - 180˚
3882
68.1
100.0
Efficiency: 68.1%
90˚
2AV G 3 32 MDR, (3) 32W T8 lamps, 2850 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10155
300
70˚
600
900
50˚
1200
1500
1800
10˚
30˚
0˚
CP Summary
0˚
90
0˚ 1934 1934
5˚ 1941 1913
15˚ 1880 1871
25˚ 1747 1781
35˚ 1539 1632
45˚ 1275 1435
55˚ 956 1179
65˚ 611
849
75˚ 298
431
85˚ 66
90
90
0
0
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 81 81 81
79 79 79
76 76 76
1 74 71 68
69 67 64
66 64 62
2 67 62 57
60 56 52
58 54 51
3 61 54 48
53 47 43
51 46 42
4 56 48 41
47 41 37
45 40 36
5 51 42 36
42 36 31
40 35 31
6 47 38 32
37 32 27
36 31 27
7 44 34 28
34 28 24
33 28 24
8 41 31 26
31 25 21
30 25 21
9 38 29 23
28 23 19
28 23 19
10 36 27 21
26 21 17
26 21 17
RCR
90˚
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0˚ - 30˚
1529
17.9
26.2
0˚ - 40˚
2527
29.6
43.3
0˚ - 60˚
4552
53.2
78.0
0˚ - 90˚
5837
68.3
100.0
90˚ - 180˚
0
0.0
0.0
0˚ - 180˚
5837
68.3
100.0
Efficiency: 68.3%
90˚
For additional photometric information, visit our website at www.lithonia.com.
MOUNTING DATA
Ceiling type
G
ST
GA
STA
Appropriate trim type
Exposed grid tee (1' and 9/16")
Concealed grid tee
Screw slot
Plaster or plasterboard
G
G
ST
G*
Lay-in trim (exposed grid tee )
Screw slot trim (screw slot tee)
Lay-in trim (exposed grid tee
Screw Slot (scre w slot tee)
*DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 48-3/4" (Tolerance is +1/8", -0”).
2AV-2x4-T8T5-NY
FLUORESCENT:
One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2007-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/18/2012
Type
ADA
Job Name
Compliant
Catalog Number
Wal14 Wa l l M o u n t
S-Occ™
Efficiency
L-7
7"
4"
P
SD
WFA
ordering
series
body style
lamp
rows
nominal
length
1T8
02'
2T8
03'
color/finish*
circuiting
voltage
mounting
options
TMW textured matte
white
SC single
circuit
120
WM*
EML*
YGW gloss white
DC* dual
circuit
WAL14
WFA* white frost
acrylic
BFA* blue frost
acrylic
1T5
04'
P†
2T5
06'
perforated
solid
1T5HO
08'
*adds .25" to length
† adds .125" to length
2T5HO
R__*
SD†
*row length
WFA/BFA
adds .25"
to length
P/SD adds
.125" to
length
Y__
CC
premium color
custom color
(in-line)
*2-lamp only
BAL† brushed
aluminum
GLV
galvanized
*for WFA and BFA specify
paint color for endplate
and bezel only.
† SD body style only-will
have black endplate.
277
direct to
wall
EMH*
347
SUR† surface
ceiling
DM
UNV*
VWM†
RSE
*120-277
vertical
wall mount
*standard
† kicker reflector is
not supplied
10THD
B__
FH
QC
OCO*
OC2C *†
OCDM*
Applications Stairwells, lobbies, hallways, open offices, small
offices, retail, bathrooms.
Features New frost acrylic fascia for updated look and increased
fixture efficiency. Also available with perforated or optional finish solid
fascia. Fixture is open on the top and the bottom to give a wash of
light above and below, while the kicker reflector pushes light out and
away to wash the ceiling. Dimming, emergency, and integrated
occupancy sensor options are available.
Construction The housing, available in 2-, 3-, 4-, 6- or 8-foot
standard lengths, and finish plates are made of 20-gauge steel.
Finish Specify the endplate and bezel polyester powder paint color
for acrylic body styles. See ordering matrix for optional metal finishes.
End plates are painted black (YBB) with galvanized and brushed aluminum (SD body style only) fascias unless otherwise specified.
Electrical T8 fixtures have instant-start electronic ballasts with
less than 20% THD. T5/T5HO fixtures have programmed-start elec-
* consult factory
for fixture
lengths < 4'
†2 lamp only
tronic ballasts with less than 10% THD. Fixtures are U.L. Damp
labeled and I.B.E.W. manufactured. Maximum ballast size available:
2.4" width x 1.5" height.
Mounting Fixture is to be mounted directly to a wall or surfacemounted on ceilings.
Options EML: emergency battery (600-700 lumens); EMH: emergency battery (1100-1400 lumens): DM: dimming (specify manufacturer,
voltage and other requirements); RSE: rapid-start electronic; 10THD:
ballast with <10% total harmonic distortion; B_: specific ballast, specify
manufacturer and catalog number (consult factory); FH: fixture fusing
(slow blow); QC: quick-connect circuit assemblies; OCO: S-Occ™
Integrated Occupancy System – all lamps on/off; OC2C: S-Occ™ one lamp sensored, one lamp on constantly; OCDM: S-Occ™ - dim
to standby mode.
Prudential reserves the right to change design specifications or materials without notice.
02
07
Prudential Ltg. 1737 East 22nd Street, Los Angeles, CA 90058 3/12
ADA
Efficiency
S-Occ
Wa l l M o u n t
photometric data
Candlepower Summary
Report # LLIıı0902A D= 40.4% I=59.6%
Lamp Lumens: 2950
Input Watts: 56.3
Vertical
Angle
150°
983
120°
656
328
90°
328
656
60°
983
30°
1311
Zone
0-90
90-180
% Lamp % Luminaire
36.4
53.7
40.4
59.6
Luminance Summary (cd/m2)
45
55
65
75
85
Floor
Ceiling
Wall
RCR 0
Efficiency = 90.ı%
Angle
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
Ho r i z o n t a l A n g l e
0°
30°
45°
60°
90°
558
694
693
619
634
744
843
918
959
970
969
962
937
873
874
1025
1223
1311
1159
558
672
680
602
549
606
670
723
751
760
761
777
769
762
847
1025
1212
1284
1159
558
656
676
615
515
484
509
532
558
557
578
595
619
681
849
1073
1227
1274
1159
558
640
646
623
515
401
347
333
343
342
381
409
513
680
898
1117
1215
1266
1159
558
534
511
455
388
309
216
132
72
12
149
455
435
394
387
946
1060
1110
1159
0°
45°
90°
2817
3145
3489
3835
4200
2397
2359
2526
2777
3105
3396
2989
2473
2010
1419
1
2
3
4
5
6
7
8
9
10
WAL-14-P-2T8-04-TMW
Candlepower Summary
Report # LSIı5373 D= 39.0% I=6ı.0%
Lamp Lumens: 2950
Input Watts: 60
Vertical
Angle
1000
150°
750
120°
500
250
90°
250
500
60°
750
30°
1000
Coefficients of Utilization (%)
Zonal Lumen Summary
Wal14
photometric data
WAL-14-WFA-2T8-04-TMW
1311
Compliant
™
Zone
% Lamp % Luminaire
80
70
50
70 50 30 10 70 50 30 10 50 30 10
0-90
90-180
94
84
75
68
62
57
52
48
45
42
39
Efficiency = 65.6%
94
79
68
59
52
46
41
37
33
30
28
94
74
61
51
44
38
33
29
26
23
21
94
70
56
46
38
32
28
24
21
19
17
86
76
68
61
56
51
47
43
40
38
35
86
71
61
53
47
42
37
33
30
28
25
86
68
56
47
40
35
30
27
24
21
19
86
64
51
42
35
30
25
22
19
17
15
70
58
49
43
38
34
30
27
25
23
21
70
55
45
38
33
28
25
22
20
18
16
70
52
42
34
29
24
21
18
16
14
13
25.59
40.02
39.00
61.00
45
55
65
75
85
Floor
Ceiling
Wall
RCR 0
Luminance Summary (cd/m2)
Angle
Output
543
537
515
473
414
338
251
158
71
7
0
21
144
305
466
624
763
874
952
991
990
543
531
468
381
278
176
125
83
61
61
62
65
102
230
380
537
700
813
918
986
990
543
506
400
275
215
193
186
200
223
234
232
232
227
243
319
444
584
731
859
965
990
543
502
367
249
239
251
279
332
371
393
391
389
371
337
366
446
576
699
840
960
990
543
488
342
249
253
283
334
396
441
461
458
455
435
394
387
438
538
670
821
955
990
24
58
73
83
90
99
111
120
125
126
131
144
168
189
194
173
123
46
Coefficients of Utilization (%)
Zonal Lumen Summary
effective floor cavity reflectance = .20
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
Ho r i z o n t a l A n g l e
0° 22.5° 45° 67.5° 90° Lumens
0°
45°
90°
6623
6063
5180
3801
1112
1652
1474
1471
1541
1562
1831
1926
2071
2153
2181
1
2
3
4
5
6
7
8
9
10
effective floor cavity reflectance = .20
80
70
50
70 50 30 10 70 50 30 10 50 30 10
69
62
56
51
46
42
39
36
33
31
28
69
58
50
44
39
34
31
28
25
23
20
69
55
46
39
34
29
25
22
20
17
16
69
53
42
35
30
25
21
19
16
14
13
62
56
50
46
42
38
35
32
30
28
26
62
53
46
40
35
31
28
25
23
21
19
62
50
42
36
31
27
23
21
18
16
14
62
48
39
32
27
23
20
17
15
13
12
51
43
37
33
29
26
23
21
19
17
15
51
41
34
29
25
22
19
17
15
13
12
51
39
32
27
23
19
17
14
13
11
10
installation
Adjoining Detail
Mounting Locations
24", 36" or 48"
5"
5"
mounting hole
7/8"
diameter K.O.
72" or 96"
5"
5"
24"
10"
Prudential reserves the right to change
design specifications or materials without notice.
02
Prudential Ltg. tel 213.746.0360 fax 213.741.8590 prulite.com
07
L-7 sensor
™
S-Occ
The occupancy sensor controls system for stairwells and small spaces that saves energy and money.
sensible
Safe, Reliable and Efficient.
Prudential Ltg.’s stairwell fixtures
have always been admired for their
combination of performance, durability
and design aesthetics. Now, you can
add one more benefit to the list:
energy-savings. That’s the power
of S-Occ™.
The compact sensors are
unobtrusive, preserving the
integrity of Prudential's design.
Wal12 – Perfect proportion for low ceilings
• Indirect or semi-indirect illumination
• Choice of solid or perforated fascia for lobbies,
corridors, and restrooms
• Designed for 1 or 2-T8, T5, or T5HO, lamp rows
Wal14 – A perfect stairwell fixture
• Fascia is curved to shield the lamp from direct
view as you are walking up or down the stairs
• Kicker reflector washes the wall surface above
and below fixture
• ADA-compliant wall-mounted wall-wash system;
optional vertical mounting
Snap – The simplest things are the most versatile
The occupancy sensors allow each
stairwell fixture to remain off, or
dimmed to minimal light levels,
until someone enters the stairwell.
Prudential partnered with Wattstopper/Legrand to help cut
energy costs and carbon emissions. You’ll save time and
headaches, too. Here’s how:
• The S-Occ™ sensor is integrated into the housing
during production pre-wired and pre-calibrated with
a 15-minute delay.
• A minimally detailed low-profile lensed wrap
• Choose your luminaire: Wal12, Wal14, Snap or P1220.
• Extruded acrylic lens held without fasteners
• Once you’ve chosen a fixture, specify which mode
you want the sensors to operate: OCO – all lamps
on/off using program rapid-start ballast; OC2C –
one lamp sensored, one lamp on; or OCDM – dim to
10% standby mode using standard dimming ballast.
• ADA-compliant
• One T8, T5, or T5HO, or 2-T5 lamp rows
P1220 – A narrow surface-wrap fixture
• Ideal for stairwells or corridors
• Numerous lens options patented scissor-spring latch
• Add the mode to the end of the part number, for example:
S1-1T8 - 04’-TMW - 120 - SUR- OCDM- EM
Wal12
Wal14
This describes a single 4’ Snap fixture with textured
matte white finish, wall mounted, 120 volt, with
integrated occupancy sensor that dims to standby
mode, with emergency battery.
To learn more about how Prudential fixtures with S-Occ™
technology can meet your needs, please contact us and
ask to speak to a Sales Representative in your area.
P1220
Snap
10%
Cert no. SCS-COC-00919
Waste not, want not. As part of our efforts
to ensure we practice sustainability in our
business, we’ve printed this brochure on
recycled paper.
Light creates Life.
Create with Prudential Ltg.
213.746.0360
prulite.com
L-8
Armstrong® Tech Zone®
avenue 6
®
features
Avenue® 6 is Armstrong® TechZone®
compatible.
1 and 2 lamp energy efficient fluorescent
T5/T5HO or T8.
Shielding options include corrugated or solid
regressed trim, flush lens or parabolic louver.
grid mount
5.50"
139.7mm
Avenue® 6 provides an integrated lighting
solution that compliments the ceiling and
entire space while providing comfortable
general illumination.
shielding options
6.00"
152mm
drywall flange
dimensional data
width
grid mount6.875"frame
max - 6.75" min
flush lens
parabolic louver
suspended
twelve with
MicroGlow™
Mounting yoke
must be installed
prior to drywall.
5.49"
139.4mm
5.50"
139.7mm
solid regress
trim
microglowTM lens
6.00"
6.20"
152mm
157.5mm
april 2011 A
companion luminaire
8.63"
119.1mm
drywall
flange
lamping/shielding
options
frame widthflush lens
regressed trim
parabolic louver
5.49"
139.4mm
6.875" max - 6.75" min
Mounting yoke
must be installed
prior to drywall.
mr16
performance
1–Lamp T5HO
67% Efficiency
1392 cd @ 125°
6.20"
157.5mm
8.63"
119.1mm
lamping/shielding options
regressed trim
flush lens
parabolic louver
Visit focalpointlights.com for
complete photometric data.
www.focalpointlights.com | 1.773.247.9494
fixture:
project:
ordering
mounting information
luminaire series
Avenue 6
grid
FAV6
FAV6
shielding
Corrugated Regressed Trim Frst.Lns
Solid Regressed Trim Frosted Lens
Flush Frosted Lens
Parabolic Louver
1 11/ 16"
1 1/ 2"
15/ 16"
9/ 16"
9/16" Silhouette®
G3
15/16" Prelude®
G4, T4
(T5/T5HO only)
lay-in tile
1 11/ 16"
1 1/ 2"
tegular tile
Luminaire always rests at level of tile.
9/ 16"
9/ 16"
9/16" Suprafine®
T5
9/16" Interlude®
T6
White Painted Parabolic Louver
(T5/T5HO only)
Corrugated Regressed Trim
with MicroGlowTM
Solid Regressed Trim with MicroGlow™
Flush MicroGlowTM Lens
CR
SR
FL
PL
PW
CRM Lens
SRM Lens
FLM
lamping
One Lamp T5
One Lamp T5HO
One Lamp T8
Two Lamp T5
Two Lamp T5HO
Two Lamp T8
1T5
1T5HO
1T8
2T5
2T5HO
2T8
circuits
Single Circuit
Dual Circuit
construction
voltage
One-piece 20 Ga. steel housing
Corrugated and solid regress trim constructed of 6063-T5 extruded aluminum
finished in Matte Satin White.
20 Ga. steel, universal flange rail finished in Matte Satin White.
Earthquake brackets supplied as standard.
120 Volt
277 Volt
347 Volt
4' unit weight:
5' unit weight:
15 lbs.
22 lbs.
optic
22 Ga. steel reflectors finished in High Reflectance White powder coat.
Acrylic lens diffuser .118" thick, frosted clear.
Parabolic louver: .75"H x 1.5" frequency fabricated of low iridescent,
semi-specular premium grade aluminum.
Louver can be specified with matte white finish.
electrical
Luminaires are individually wired for specified circuits.
Thru-wiring not available.
Electronic ballasts are thermally protected and have a Class “P” rating.
Consult factory for dimming specifications and availability.
UL and cUL listed.
finish
Polyester powder coat applied over a 5-stage pre–treatment.
1C
2C
120
277
347
ballast
Electronic Program Start <10% THD S
Electronic Dimming Ballast* D
ceiling configurations
9/16" Silhouette Slot-tee Tegular
15/16" Prelude Lay-in
15/16" Prelude Tegular
9/16" Suprafine Tegular
9/16" Interlude Node Tegular
G3
G4
T4
T5
T6
factory options
Chicago Plenum CP
Emergency Battery Pack* EM
(4' Luminaires Only)
HLR/GLR Fuse
Include 3000K Lamp*
Include 3500K Lamp*
Include 4100K Lamp*
Lutron™ Sensor Feed*
(EcoSystem ballast required)
(Consult factory for Occupancy &
Daylight Sensor availability)
FU
L830
L835
L841
SF
WH
finish
Matte White Housing
WH
luminaire length
4' Nominal Housing
5' Nominal Housing
(Consult factory for 5' dimming)
4'
5'
Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | T: 773.247.9494 | F: 773.247.8484 | info@focalpointlights.com | www.focalpointlights.com.
Focal Point LLC reserves the right to change specifications for product improvement without notification.
specifications
* for more information see Reference section.
recessed
363
av enue 6
®
906
120°
604
110°
302
100°
0°
6665
5°
1499 1499 1499 1497 1497 143
0°-40°
1792
35.8
53.3
55°
7652 6162
5153
15°
1452 1449 1442 1435 1432 409
0°-60°
2882
57.6
84.7
65°
6521 4793
4027
25°
1324 1316 1292 1265 1248 597
0°-90°
3364
67.3
100
75°
5058 3434
2902
35°
1096 1082 1030
965
938
643
0°-180°
3364
67.3
100
85°
3320 1739
1502
45°
911
889
798
713
684
619
637
603
513
451
429
471
400
363
294
257
247
307
604
70°
75°
190
16
129
113
109
146
85° 42
31
22
21
19
29
90°
0
0
0
0
0
95°
0
0
0
0
0
0
105°
0
0
0
0
0
115°
0
0
0
0
125°
0
0
0
0
135°
0
0
0
145°
0
0
0
155°
0
0
0
40°
90°
45°
0°
45°
90°
0°
Spacing 1.2
Criterion: 1.1
Total
Luminaire
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
20
80 70 50 30 10
70 50 30 10
70 50 10
50 10
50 10
5010
00
00
RCR 0
80 80 80 80
78 78 78
75 75
72 72
69 69
67
1
75 72 69 67
73 70 66
68 64
65 62
63 60
59
0
2
69 61 60 57
67 63 56
61 55
59 54
57 53
51
0
0
3
64 58 53 49
62 58 49
55 48
53 47
51 46
45
0
0
4
59 52 47 43
57 51 42
49 42
48 41
46 41
39
0
0
0
5
54 46 41 37
53 46 37
44 36
46 36
42 35
34
0
0
0
6
50 42 36 32
49 41 32
40 32
39 32
38 31
30
0
0
0
7
46 38 32 29
45 37 28
36 28
35 28
34 28
27
165°
0
0
0
0
0
0
8
43 34 29 25
42 34 25
33 25
32 25
31 24
23
175°
0
0
0
0
0
0
9
39 31 25 22
39 30 22
30 22
29 22
28 21
20
180°
0
0
0
0
0
10
37 28 23 19
36 28 19
27 19
26 19
26 19
18
Go to www.focalpointlights.com for additional photometric data.
av enue 6
®
130°
120°
879
586
110°
293
100°
0°
5°
1462 1460 1459 1457 1456 139
0°-40°
1726
34.5
51.4
55°
7111 6390
5838
15°
1406 1402 1390 1380 1376 394
0°-60°
2817
56.3
83.9
65°
5999 5380
4907
25°
1298 1268 1242 1211 1197 574
0°-90°
3358
67.2
100
75°
4658 4206
3886
35°
1046 1029
985
942
925
619
0°-180°
3358
67.2
100
85°
3241 3083
3004
45°
859
837
784
740
721
610
572
532
498
486
480
368
354
330
308
301
329
586
70°
75°
175
85° Spacing 1.2
Criterion: 1.1
30°
40°
90°
45°
0°
90°
7025
592
20°
Vertical
Angle 0°
45°
8370 7639
65°
10°
%
Fixt
45°
55°
0°
45°
90°
%
Lamp
330
0°
Zone Lumens
22.1
50°
LUMINANCE DATA (CD/M2)
1107
80°
60°
Test #: 13929.0
0°-30°
90°
1464
Efficiency: 67%
1464 1464 1464 1464 1464
0
1172
LUMEN SUMMARY
293
879
Catalog #: FAV6-FL-1T5HO-1C-120-G1-WH-4’
VerticalHorizontal Angle
Zonal
Angle 0°
22.5°
45°
67.5° 90° Lumens
140°
1172
Filename: FAV6FL1T5H.IES
Total
Luminaire
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
20
80 70 50 30 10
70 50 30 10
70 50 10
50 10
50 10
5010
00
00
RCR 0
80 80 80 80
78 78 78
75 75
74 74
69 69
67
1
74 71 69 67
72 70 66
67 64
65 62
62 60
58
0
2
68 64 60 56
67 62 56
60 54
58 53
56 52
51
0
0
3
63 57 50 48
62 56 48
54 47
52 46
51 45
44
0
0
4
58 51 46 42
57 50 41
49 41
47 40
46 40
38
0
0
0
5
53 46 40 36
52 45 36
43 35
42 35
41 35
33
0
0
0
6
49 41 35 31
48 40 31
39 31
35 31
37 31
29
0
0
0
7
46 37 32 28
45 37 28
36 27
35 27
34 27
26
170
158
150
146
169
41
41
39
38
38
43
90°
0
0
0
0
0
95°
0
0
0
0
0
0
105°
0
0
0
0
0
115°
0
0
0
0
125°
0
0
0
0
135°
0
0
0
145°
0
0
0
155°
0
0
0
165°
0
0
0
0
0
0
8
42 33 28 4
41 33 24
32 24
31 24
30 24
22
175°
0
0
0
0
0
0
9
39 30 25 21
38 30 21
29 21
28 21
28 21
20
180°
0
0
0
0
0
10
36 27 22 19
35 27 19
26 19
26 19
25 18
17
Numbers indicate percentage values of
180° 170° 160° 150°
1464
CANDLEPOWER DISTRIBUTION
90°
8876 7775
65°
30°
Vertical
Angle 0°
45°
45°
55°
20°
%
Fixt
34.2
10°
%
Lamp
23.0
0°
Zone Lumens
1149
80°
50°
LUMINANCE DATA (CD/M2)
0°-30°
302
60°
Test #: 13928.0
1499 1499 1499 1499 1499
90°
1509
Efficiency: 67%
LUMEN SUMMARY
0
1208
Numbers indicate percentage values of
130°
906
Catalog #: FAV6-SR-1T5HO-1C-120-S-G1-WH-4'
VerticalHorizontal Angle
Zonal
Angle 0°
22.5°
45°
67.5° 90° Lumens
140°
1208
Filename: FAV6SR1T5H.IES
CANDLEPOWER DISTRIBUTION
180° 170° 160° 150°
1509
Go to www.focalpointlights.com for additional photometric data.
avenue 6
®
Catalog #: FAV6-SR-2T5HO-1C-120-S-G1-WH-4'
Efficiency: 53%
LUMINANCE DATA (CD/M2)
0°
Zone Lumens
%
Lamp
%
Fixt
90°
2399 2399 2399 2399 2399
0°-30°
1809
18.1
34.2
45°
1428412121 10357
5°
2377 2379 2374 2373 2370 227
0°-40°
202
28.0
53.1
55°
12288 9682
8096
1443
120°
15°
2326 2319 2299 2280 2270 652
0°-60°
4520
45.2
85.6
65°
10515 7597
6358
962
110°
25°
2090 2070 2016 1951 1917 930
0°-90°
5281
52.8
100
75°
7922 5251
4472
481
100°
35°
1727 1692 1584 1472 1426 993
0°-180°
5281
52.8
100
85°
5217 2846
2451
45°
1466 1411 1244 1111 1063 974
55°
1023 958
806
705
674
744
65°
645
579
466
405
390
488
298
252
201
176
168
228
66
48
36
33
31
45
Total
Luminaire
0
90°
481
80°
962
70°
75°
1443
60°
85° 90°
0
0
0
0
0
RCR 0
63 63 63 63
61 61 61
59 59
56 56
54 54
53
95°
0
0
0
0
0
0
1
59 56 55 53
57 55 52
53 50
51 49
49 47
46
1924
2405
50°
0°
10°
20°
30°
40°
90°
45°
0°
45°
90°
0°
Spacing 1.2
Criterion: 1.1
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
20
80 70 50 30 10
70 50 30 10
70 50 10
50 10
50 10
5010
00
00
105°
0
0
0
0
0
0
2
54 50 47 45
53 49 44
48 43
46 42
44 41
40
115°
0
0
0
0
0
0
3
50 45 42 39
49 44 38
43 38
42 37
40 36
35
125°
0
0
0
0
0
0
4
46 41 37 33
45 40 33
39 33
38 32
36 32
31
135°
0
0
0
0
0
0
5
42 36 32 29
41 36 29
35 28
34 28
33 28
27
145°
0
0
0
0
0
0
6
39 33 29 25
38 32 25
31 25
31 25
30 25
24
155°
0
0
0
0
0
0
7
36 30 25 22
35 29 22
28 22
28 22
27 22
21
165°
0
0
0
0
0
0
8
34 28 23 20
33 26 20
26 19
25 19
24 19
18
175°
0
0
0
0
0
0
9
31 24 20 19
30 24 17
23 17
23 17
22 17
16
180°
0
0
0
0
0
10
29 22 18 15
28 22 15
21 15
21 15
20 15
14
Go to www.focalpointlights.com for additional photometric data.
avenue 6
®
Catalog #: FAV6-FL-2T5HO-1C-120-G1-WH-4’
Efficiency: 53%
130°
Test #: 13927.0
LUMINANCE DATA (CD/M2)
LUMEN SUMMARY
Zone Lumens
VerticalHorizontal Angle
Zonal
Angle 0°
22.5°
45°
67.5° 90° Lumens
140°
1844
Filename: FAV6FL2T5H.IES
0°
%
Lamp
%
Fixt
Vertical
Angle 0°
45°
90°
2307 2307 2307 2307 2307
0°-30°
1734
17.3
33.0
45°
1331911916 10883
5°
2291 2290 2287 2284 2281 218
0°-40°
2693
26.9
51.2
55°
1139910018 9117
1383
120°
15°
2245 2235 2213 2190 2179 627
0°-60°
4406
44.1
83.8
65°
9635 8395
7711
922
110°
25°
1999 1977 1919 1865 1841 889
0°-90°
5255
52.6
100
75°
7294 6522
6016
461
100°
35°
1641 1606 1523 1447 1416 959
0°-180°
5255
52.6
100
85°
5138 4822
4822
45°
1367 1322 1223 1145 1117 955
0
90°
55°
949
911
834
780
759
758
461
80°
65°
591
565
515
484
473
520
922
70°
75°
274
85° 1383
60°
1844
2307
50°
0°
10°
20°
0°
45°
90°
Spacing 1.2
Criterion: 1.1
30°
40°
90°
45°
0°
Total
Luminaire
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
20
80 70 50 30 10
70 50 30 10
70 50 10
50 10
50 10
5010
265
245
230
226
262
65
63
61
61
61
68
90°
0
0
0
0
0
RCR 0
63 63 63 63
61 61 61
59 59
56 56
54 54
53
95°
0
0
0
0
0
0
1
58 56 54 52
57 55 51
53 50
50 48
49 47
46
00
00
105°
0
0
0
0
0
0
2
54 50 47 44
52 49 43
47 42
45 42
44 41
40
115°
0
0
0
0
0
0
3
49 45 41 38
48 44 37
42 37
41 36
40 36
34
125°
0
0
0
0
0
0
4
46 40 35 33
44 39 32
38 32
37 32
36 31
30
135°
0
0
0
0
0
0
5
42 36 31 28
41 35 28
34 28
33 27
32 27
26
145°
0
0
0
0
0
0
6
39 32 28 25
38 32 25
31 24
30 24
29 24
23
155°
0
0
0
0
0
0
7
36 9 25 22
35 29 22
28 21
27 21
26 21
20
165°
0
0
0
0
0
0
8
33 26 22 19
32 26 19
25 19
24 19
24 19
18
175°
0
0
0
0
0
0
9
30 24 19 17
30 23 16
3 16
22 16
22 16
15
180°
0
0
0
0
0
10
28 21 17 15
28 21 15
21 15
20 15
20 14
14
Numbers indicate percentage values of
180° 170° 160° 150°
2307
CANDLEPOWER DISTRIBUTION
Vertical
Angle 0°
45°
Numbers indicate percentage values of
130°
Test #: 13926.0
LUMEN SUMMARY
VerticalHorizontal Angle
Zonal
Angle 0°
22.5°
45°
67.5° 90° Lumens
140°
1924
Filename: FAV6SR2T5H.IES
CANDLEPOWER DISTRIBUTION
180° 170° 160° 150°
2405
Go to www.focalpointlights.com for additional photometric data.
HALO
®
DE S C R I P T I O N
Ideal for task, accent, office, cove, utility, under and above cabinet lighting
display, the Halo Undercabinet low-profile design delivers maximum
energy savings and life with easy installation. The integrated driver
allowing 120V direct to the fixture for easy installation. Fixtures are
available in 12”, 18” or 24” lengths, the Halo system can be configured
to fit almost anywhere. Smooth dimming down to 15% using a standard
dimmer*. Connector cables in a variety of different lengths make it easy
to link one unit to another. Each unit has an integrated on-off switch.
Type
Catalog #
L-10L-10
Project
Date
Comments
Prepared by
S P E C I F I C A T I O N F E AT URE S
Even Light Distribution
Finish Options
Direct Wire Accessory
Utilizing tightly clustered
proximity phosphor LEDs, results
in consistent illumination with
very high efficiency. Mounting the
LEDs very close to the lens surface
creates a very wide distribution
and limits shadows for high cutoff
angles.
Fixtures and accessories are
available in both White (P) and
Matte Black (MB) finishes.
Available direct wire splice box
has a connection port on each
side to allow for runs in either or
both directions. Various connector
cable options provide flexibility
of mounting location. Includes
Romex/ 1/2 conduit connector.
Electronic Ballast
Electronic driver provides
full light output and rated ife.
Provides flicker free and noise free
operation.
Low Profile Housing
Link any combination of fixtures
up to 800 W total load using
available connectors.
Labels
Heavy gauge aluminum housing
and color matched end caps with
less than 3/4” overall height.
- cULus listed
- Can be used to meet IECC, ASHRAE commercial and residential standards
- ENERGY STAR® qualified
-FCC
Two Fastener Mounting
Each unit is secured directly to the
mounting surface with just two
fasteners keeping installation costs
low. Can be mounted in horizontal
and vertical orientations.
HU10P
Continuous Runs
HU10MB
HU10
“L”
See Size Table
Integrated Driver
LED Undercabinet
ENER GY D A TA
4.5”
[114mm]
Size Description
12 in. Nominal
18 in. Nominal
24 in. Nominal
Length “L”
12.38” [314.5mm]
18.38” [466.9mm]
24.38” [619.3mm]
1.25”
[32mm]
2”
[51mm]
.68”
[17.296mm]
.38”
[9.525mm]
when installed
3.24”
[82.35mm]
Power Factor: >0.99
THD: <10%
Color Temperature: 3000 K
Color Rendering Index: 80
Nominal Lumens/Ft: 350
12” Fixture
Lumens: 341
120V Input Watts: 4.95
Line Amps: 0.044
LPW: 70
18” Fixture
Lumens: 563
120V Input Watts: 8.17
Line Amps: 0.072
LPW: 69
24” Fixture
Lumens: 707
120V Input Watts: 9.61
Line Amps: 0.084
LPW: 74
O R D E R I N G I N F O R MAT ION
SAMPLE NUMBER: HU1012D830P (12” Dimmable Fixture, 80 CRI, 3000 K, White Finish)
Family
Length
Dimming
Lens
CRI
Color Temperature
Finish
Accessories
HU10 =Halo Integrated Driver
Undercabinet
12=12”
18=18”
24=24”
D=Dimmable*
[Blank]=Clear
8=80 CRI
30=3000K
P=White
MB=Matte
Black
HU101=3” Daisy Chain Connector
HU102=6” Daisy Chain Connector
HU103=24” Daisy Chain Connector
HU104=120” Daisy Chain Connector
HU105=48” Power Cord
HU106=Splice Box
HU107=1-1/2” Male-to-Male Connector
*See our website for dimmer compatibility guide - www.cooperlighting.com
www.cooperlighting.com
ADV121541
November 20, 2012 4:18 PM
H U 10
C O N N EC T O R S
HU101
HU102
HU103
HU104
HU105
3” Daisy Chain Connector
6” Daisy Chain Connector
24” Daisy Chain Connector
120” Daisy Chain Connector
48” Power Cord
HU106
HU107
Splice Box
1-1/2" Male-to-Male Connector
Finish: P = White; MB = Matte Black Example: HU101P = 3” Daisy Chain Connector, White
PHO TO M E T R Y
Optional Mounting Heights
Fixture Application Illustration
MOUNTING HEIGHT 15"
MOUNTING HEIGHT 18"
Top Number
Report: HU1024D830.IES
Middle Number
Report: HU1018D830.IES
Bottom Number
Report: HU1012D830.IES
Countertop 16" x 30"
Top Number Report - HU1024D830.IES
Middle Number Report - HU1018D830.IES
Bottom Number Report - HU1012D830.IES
3.6 6.4
11.9 19.5 26.9 29.4 26.9 19.5 11.7
6.3
3.6
2.5 4.3
1.5 2.6
7.9
4.9
7.9
4.9
4.3
2.6
2.5
1.5
4.8 9.1
18.8 37.2 55.4 60.2 55.4 36.6 18.6
9.0
4.7
3.2 5.8
1.9 3.5
11.5 23.8 46.7 63.2 46.7 23.7 11.5
7.0 14.5 28.6 38.6 28.6 14.5 7.0
5.8
3.5
3.2
1.9
128 73.3 29.4 12.1
5.7
5.7 12.1 29.6 73.7 128
3.7 7.0
2.2 4.3
2 in.
16 in.
18 in.
1-1/2 in.
6 in.
4.6
3.2
1.9
4.6
12 in.
3.2
4.6
8.1
18 in.
1.9
4
7.3
5.5 8.1
14.3
24 in.
2.5
4.6
7.3
10 14.3 3.4 7.3
14.4
30 in.
2.9
22.7
4.5
6.1
4.7
8.9
6.2
13.9
16.9
30.4
14.9
2.9
30.9
5.5
4.1
8.4
10.4 22.7
0.3
25.9
9.1
18.5
33.1
26.7
2.5
12
0.2
30.4
5.6
16
62.4
32.7
30.8
11.3
16.2
0.1
7.6
30.4
45.8
40.9
0.3
19.3 24.1
18.9 33.1
4.6
30 in.
25.9
96
28.1
0.2
24.8 68.3
22.7
11.7 15.4
57.5
16 30.4
81.6
43.7
0.1
16.9
35.1
14.3
9.2 0.3
104
49.6
106
26.3 45.4
45.8
24
in.
10.4
10
0.2
22.7
111
8.1
90.5
31.7
28.1
96
0.1
6.1
26.7
67.1 116
5.5
54.8
19.1 0.3
81.6
66.5
14.3
16.3 62.9
18in.
3.4
0.2
49.6
124
57.8
13.9
106
8.1
0.1
73.2
40.9
0.3
75
35
8.4
90.5
7.3
31
24.8
74.7
0.2
12 in.
6
68
54.8
4.5
18.5
66.5
45
0.1
0.3
4
14.5
43.7
11.3
57.8
0.2
2.5
8.9
26.3
6 in.
32.6
35 0.3
7.3
0.1
45.4
5.5
19.3
4.6
31.7
14.9
0.2
11.7 23.9
2.9
19.1
0
in.
9.1
0.2
0.3
15.4
5.6
7.3
0.2
CL
9.3
4.7
11.9
0.1
6 in.
0.3
2.9
7.6
0.3
4.6
6.2
0.2
0.2
12 in.
4.1
0.2
2.5
0.1
0.3
Point By Point Illumination Scale is
18
in.
0.2
Exaggerated on Fixture Application
0.1
24 in.
and Mounting.
30 in.
14.2 23.2 28.4 23.2 14.2
8.7 14.4 17.8 14.4 8.7
132
15.7 40.3 102 162 102 40.3 15.7
9.6 24.6 62.1 97.3 62.1 24.6 9.6
7.0
4.3
3.7
2.2
149 83.8 31.6 12.4
5.7
5.7 12.4 31.6 83.5 149
154
3.6 7.1
2.2 4.4
193 120 44.3 16.4
116 72.0 26.7 10.0
7.1
4.4
3.6
2.2
4.6 9.4
21.3 46.4 75.2 81.1 75.2 47.0 21.5
9.5
4.6
3.0 5.8
1.8 3.5
12.4 29.3 64.0 90.9 64.0 29.3 12.4
7.5 17.7 38.7 54.9 38.7 17.7 7.5
5.8
3.5
3.0
1.8
0.3 0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.2 0.2
0.1 0.1
0.2
0.2
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
16.4 44.3 120
10.0 26.7 72.0
30" 24" 18" 12" 6"
0
1 -1 /2 "
6"
12"
18"
24"
30"
6" 12" 18" 24" 30"
CL
MOUNTING HEIGHT 24"
Top Number: Report - HU1024D830.IES
Middle Number: Report - HU1018D830.IES
Bottom Number: Report - HU1012D830.IES
6.6 10.6 16.9 24.0 29.9 32.2 29.9 24.0 16.9 10.6
6.6
4.7 7.6
2.8 4.6
7.6
4.6
4.7
2.8
8.3 13.8 22.7 33.5 43.3 46.8 43.3 33.5 22.6 13.8
8.2
5.8 9.8
3.5 5.9
9.7
5.9
5.8
3.5
9.7 16.7 28.5 44.8 59.5 65.1 59.5 44.8 28.5 16.7
9.6
6.6 11.4 20.1 34.2 51.5 60.2 51.5 34.2 20.1 11.4
4.0 6.9 12.1 20.7 31.3 36.6 31.3 20.7 12.1 6.9
6.6
4.0
9.8 17.0 29.4 46.9 62.4 68.7 62.4 46.9 29.4 17.0
9.8
6.7 11.6 20.5 35.7 54.5 63.6 54.5 35.7 20.5 11.6
4.1 7.0 12.4 21.5 33.0 38.1 33.0 21.5 12.4 7.0
6.7
4.1
8.7 14.5 24.1 37.0 48.4 52.8 48.4 37.0 24.1 14.5
8.6
6.0 10.2 17.3 28.6 41.7 48.3 41.7 28.6 17.3 10.2
3.7 6.1 10.5 17.3 25.3 29.2 25.3 17.3 10.5 6.1
6.0
3.7
0.3 0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.2 0.2
0.1 0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
12.6 18.7 25.3 28.3 25.3 18.7 12.6
7.7 11.5 15.5 17.3 15.5 11.5 7.7
16.3 26.2 36.8 42.0 36.8 26.2 16.3
9.9 15.8 22.3 25.5 22.3 15.8 9.9
30" 24" 18" 12" 6"
0
1 -1 /2 "
6"
12"
18"
24"
30"
6" 12" 18" 24" 30"
CL
www.cooperlighting.com
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049
NEO-RAY
DESCRIPTION
Series 71 is part of an aesthetically-pleasing family of perimeter wall lighting
systems that work in harmony with well designed architectural elements.
The continuous fixture runs are field adjusted to adapt to ceiling conditions.
There are no visible joints, mullions, or hardware. The wall angle is heavy
extruded aluminum, floating away from the wall. The adjustable fascia is
heavy gauge steel, double formed "U" shaped, rigid, straight, and true with
a 3/8" regress soft lit edge. Note: Fixtures shall be installed before ceiling.
Catalog #
Type
71-XX-XX
L-2
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
A ... Construction
20-gauge steel housing sections in
3', 4', 6' and 8' lengths.
C ... Electrical
120, 277, 347 or Universal Voltage
electronic ballast. Fixtures and
electrical components certified to
UL and CUL standards. Note:
Please consult factory, Fifthlight
may not be available in some
configured options.
B ... Shielding
Clear prismatic lens, lateral baffle.
A
C
B
D ... Finish
Durable, low gloss, white, powder
coated acrylic finish.
Mounting
Recessed.
D
71
1 & 2T8
1 & 2T5
1 & 2T5HO
Perimeter
10-1/2" [267mm]
± 3/4" [19mm]
Wall Wash
Light Distribution:
Indirect - 0.0%
Direct - 100.0%
1/2" [13mm]
9" [229mm]
9-1/8" [232mm]
CEILING OPENING
ORDERING INFORMATION
Sample Number: S71-1T8-8-D-1EB-SI-C-S58
Series
71=Perimeter
Number of Lamps
(Not included)
1=1 Lamp
2=2 Lamps
Lamp Type
T8
T5
T5HO
Run Length
Overall Nominal Run
Length ___ ft.
Voltage
1=120V
Individual or Run
R=Continuous Run
U=Universal
Wiring
C=Standard Circuit
Ballast
EB=Electronic Ballast
(Standard)
D=Dimming
1
2=277V
3=347V
Switching
SI=Single Switching
DU=Double Switching
Fusing
GLR
GMF
Shielding
S58=KSH-12 Acrylic Lens
S62=Lateral Louver
DB=Dimming Ballast
Notes: 1
Not all options available. Please consult your Cooper Lighting Representative for availability.
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADN041931
09/18/2013 3:06:51 PM
PHOTOMETRICS
Neoray 71
180 °
135 °
Coefficients of Utilization
Candela
Effective floor cavity reflectance
rc
rw
10
30%
50 30 10
43
42 41 39
40 39 38
38 37 37
2
3
4
5
40
38
35
33
38
34
31
26
36
32
28
23
34
30
26
21
36
33
30
25
34
31
28
22
33
29
26
21
35
32
29
24
33
30
27
22
32
29
26
23
6
7
8
30
28
26
25
26
24
22
20
23
21
19
17
21
19
17
15
25
23
21
19
22
20
18
17
21
19
17
15
24
22
21
19
22
20
18
16
20
18
17
15
23
18 15 14
45 °
9
10
90°
0°
30 °
20%
50%
50 30 10
RCR
1
90°
0°
70
80%
50 30
18 15 14
Angle
0
Along II
3078
45°
3078
Across ⊥
3078
17 15 13
Zonal Lumen Summary
71-2T12-S62-8’
(2) F40T12RS/WW
3200 Lumens
Efficiency 38.8%
Test Report
#4387.0
Zone
Lumens
%Lamp
%Fixture
0-30
0-40
2140
3137
16.7
24.5
43.0
63.0
0-60
0-90
0-120
0-180
4377
4971
0
4971
34.2
38.8
0.0
38.8
88.0
100.0
100.0
100.0
5
3213
2151
3101
10
15
3321
3364
3163
3138
2980
2813
20
25
3368
3247
3205
3093
2612
2304
30
35
40
45
3097
2617
1767
1006
2911
2489
2010
1397
2008
1697
1395
1037
50
55
60
65
70
647
579
421
316
212
1052
694
487
399
247
859
727
578
453
301
75
80
85
144
92
46
166
101
52
196
98
23
90
0
0
0
Total Luminaire Efficiency = 38.8%
RUNS AND PATTERNS
PATTERNS ARE PROVIDED IN 1FT. INCREMENTS
PLUS FILL-IN SECTION, FIELD CUT TO SUIT
9" X 9" CORNER BOX
PATTERNS ARE PROVIDED IN 1FT. INCREMENTS PLUS FIELD CUT
FILL-IN SECTION AND MITERED CORNER
SHIELDING INFORMATION
S58 Acrylic Lens
1/8" thick, clear acrylic
prismatic lens.
S62 Lateral Louver
3/16" high x 3/4"o.c.,
aluminum lateral louver
white finish.
Specifications and Dimensions subject to change without notice.
Neo-Ray • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADN041931
09/18/2013 3:06:51 PM
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE — Low profile body and side-mounted lamps allow fixture to fit in shallow spaces.
L-12
CONSTRUCTION — Housing formed from cold-rolled steel.
Available in tandem-wired lengths.
2-lamp fixtures available in choice of “2L” or opposing lamp configuration.
Side-Mounted Strip
Sturdy channel cover secured by captive quarter-turn latch for easy access to wireway.
Accepts plug-in options for 1, 2 or 3 primary circuits.
SM
For unit or row installations, surface or suspended mounting.
Finish: High-gloss, baked white polyester finish. Five-stage iron-phosphate pretreatment ensures superior
paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel.
ELECTRICAL — Fixture conforms to UL 1570 and is suitable for damp locations. AWM, TFN or THHN wire
used throughout, rated for required temperatures.
T5/T8
2', 3' or 4' Length
1, 2 or 3 Lamps
Ballast: Thermally-protected, resetting, Class P, HPF, non-PCB, UL listed, CSA certified ballast is standard.
Program start ballasts are sound rated A. Standard combinations are CBM approved and conform to UL 935.
LISTINGS — UL Listed (standard). Optional: Canada CSA or cUL. Mexico NOM. Listed for 25° C ambient
temperature.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx .
1-11/16
(4.3)
Note: Specifications subject to change without notice.
3-7/8
(9.8)
Actual performance may differ as a result of end-user environment and application.
7/8
(2.2)
4-15/16
(12.5)
All dimensions are inches (centimeters) unless specified otherwise.
ORDERING INFORMATION
For shortest lead times, configure products using bolded options.
Number of
lamps
Series
SM Side-mounted strip
For tandem double-length unit,
add prefix T.
Example: TSM1
1
2
2L1,2
3L1,2
Not included
Lamp type
Voltage
T8
17
25
32
T5
14T5
21T5
28T5
HO
24T5HO
39T5HO
54T5H0
120
277
3473
MVOLT4
17W T8 (24")
25W T8 (36")
32W T8 (48")
Others available
14W T5 (22")
21W T5 (34")
28W T5 (46")
24W T5HO (22")
39W T5HO (34")
54W T5HO (46")
Accessories: Order as separate catalog number.
SMASR48
INDUSTRIAL:
Asymmetric reflector, 4' white (order 2 for symmetric reflector).
Example: SM 2 28T5 MVOLT GEB10PS
Options
GEB10IS
GEB10PS
S5
S5115
GLR
GMF
PLR_
EL55
EL65
EL
CSA
IR
2R
Electronic ballast, <10% THD, instant start
Electronic ballast, <10% THD, programmed start
0.95 ballast factor SIMPLY5™ system5
1.15 ballast factor SIMPLY5™ system5
Internal fast-blow fuse6
Internal slow-blow fuse6
Plug-in wiring, specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC)
Emergency battery pack (nominal 390-700 lumens; consult factory for additional battery packs)6
Emergency battery pack (nominal 725-1325 lumens)6
Emergency battey pack (nominal 300 lumens) 6
CSA Certified7
Mounting holes for asymmetric reflector 8
Mounting holes for symmetric reflector 8
Notes
1 TSM not available with 2L or 3-lamp option.
2 Two lamps to form L-shaped fixture cross section.
3 Only available with 28W and 54W.
4 MVOLT (120-277V), 50-60HZ
5 SIMPLY5 system includes a 13' S5SSC RELOC® wiring system.
Specify voltage unless hardwire (HW) or PWS is ordered.
6 Specify voltage.
7 347V only.
8 Specify IR (asymmetric) or 2R (symmetric) on fixture for
mounting holes.
SM
SM Side Mounted Strip
MOUNTING DATA
DIMENSIONS
For unit or row installation, surface or stem mounting.
Unit installation — Minimum of two hangers required.
Row installation — Minimum of two hangers required.
Inches (centimeters). Subject to change without notice.
2-1/8
(5.4)
2-1/8
(5.4)
2-15/16
(7.5)
3-7/16
(8.7)
3-7/16
(8.7)
1-7/8
(4.7)
1-1/2
(3.8)
7
(17.8 )
34
(86.4)
7/8
(2.3)
1-7/8
(4.7)
2-15/16
(7.5)
2-1/8
(5.4)
23
(58.4)
7/8
(2.3)
1-7/8
(4.7)
A = 11/16 (1.7) Dia. K.O.
B= 2 (5.1) Dia. K.O.
C = 17/8 (2.2) Dia. K.O.
4
(10.2)
22
(55.9)
3-7/8
(9.8)
3-7/16
(8.7)
2-1/8
(5.4)
2-7/16
(6.2)
7/8
(2.3)
1-7/8
(4.7)
1-1/2
(3.8)
2-15/16
(7.5)
2-7/16
(6.2)
7/8
(2.3)
2-15/16
(7.5)
2-1/8
(5.4)
2-1/8
(5.4)
4
(10.2)
23
(58.4)
46
(116.8)
2-1/8
(5.4)
2-1/8
(5.4)
10
(25.4)
10
(25.4)
34
(86.4)
2-1/8
(5.4)
2-1/8
(5.4)
10
(25.4)
10
(25.4)
92
(233.7)
PHOTOMETRICS
Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. Full photometric data on these and other configurations available
upon request.
TEST NO: LTL17893
LUMINAIRE CATALOG NO.: SM 1 28T5 MOVLT GEB10PS
LUMENS PER LAMP: 2600
Coefficients of Utilization
20%
80%
70%
50% 30% 10%
50% 30% 10%
98 98 98
90 90 90
82 78 74
76 72 68
71 64 59
65 59 54
62 54 48
57 50 45
54 46 40
50 43 38
48 40 34
44 37 32
43 35 30
40 33 28
39 31 26
36 29 24
35 28 23
33 26 21
32 25 20
30 23 19
29 23 18
27 21 17
50%
50% 30% 10%
76 76 76
63 60 57
54 50 46
47 42 38
42 36 32
37 32 27
33 28 24
30 25 21
27 22 18
25 20 16
23 18 15
RCR
RCR
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
TEST NO: LTL17834
LUMINAIRE CATALOG NO.: SM 2 28T5 MVOLT GEB10PS
LUMENS PER LAMP: 2600
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw
50% 30% 10%
50% 30% 10%
50% 30% 10%
0
95 95 95
88 88 88
74 74 74
1
79 75 71
73 69 66
61 58 56
2
68 62 57
63 57 53
52 48 45
3
59 52 46
55 48 43
46 41 37
4
52 45 39
48 41 36
40 35 31
5
46 39 33
43 36 31
36 30 26
6
42 34 28
38 31 27
32 27 23
7
37 30 25
35 28 23
29 24 20
8
34 27 22
31 25 20
27 21 18
9
31 24 19
29 22 18
24 19 16
10
28 22 17
26 20 16
22 18 14
Zonal Lumen Summary
Zonal Lumen Summary
Zone Lumens % Lamp % Fixture
0° - 30° 248.3
9.6
10.4
0° - 40° 404.1
15.5
16.9
0° - 60° 718.6
27.6
30.1
0° - 90° 1149.0 44.2
48.1
90° - 180° 1240.2 47.7
51.9
0° - 180° 2389.2 91.9
100.0
Zone Lumens % Lamp % Fixture
10.5
9.3
0° - 30° 485.9
17.0
15.1
0° - 40° 785.2
30.5
0° - 60° 1406.3 27.0
49.5
0° - 90° 2282.8 43.9
50.5
90° - 180° 2332.0 44.8
100.0
0° - 180° 4614.8 88.7
SM
INDUSTRIAL:
One Lithonia Way Conyers, GA 30012
Phone: 800-315-4963
Fax: 770-981-8191
www.lithonia.com
©2009-2012 Acuity Brands Lighting, Inc. All rights reserved.
Rev. 07/04/12
C-2-32-MVOLT-XX-XX-XX
Intended Use
For applications that require
good illumination levels.
Suitable for general purpose
applications.
Construction
Steel channel (standard)
with high-gloss, baked
polyester finish.
Combination end plates/
channel connector furnished
for either unit-mounted or
continuous-row application.
Channel cover retained by
quarter-turn fastener.
ORDERING INFORMATION
Lamp type
C1, 7
17
20
24HO
25
30
32
17W T8 (24")
20W T12 (24")
35W T12 800mA (24")4
25W T8 (36")
30W T12 (36")
32W T8 (48")1
Example: C 2 32 MVOLT GEB10IS
45W T12 800mA (36")4
39W T12 slimline (48")
60W T12 800mA (48")4
55W slimline (72")3
85W T12 800mA (72")3, 4
75W slimline (96")3
96T8
96T8HO
96HO
CF39
CF40
CF50
59W T8 slimline (96")3
86W T8 380mA (96")3,
110W T12 800mA (96")3 ,4
39W CF lamp (18")
40W CF lamp (24")
50W CF lamp (24")
Voltage
Ballast configuration
MVOLT
120
277
3475
(blank) 1- and/or 2-lamp ballasts per Lithonia
Lighting standards
1/4
One 4-lamp ballast
Options
ADDITIONAL INFORMATION
SERIES
Listings
UL Listed. CUL Listed or CSA
Certified to Canadian standards.
NOM Certified–optional.
Electrical
Thermally protected, resetting, Class P, UL Listed and CSA
Certified ballast is standard.
Sound rating depends on
lamp/ballast combination.
36HO
48
48HO
72
72HO
96
EL
AL
GLR
GMF
PLF_
Emergency battery pack2
Aluminum body
Internal fast-blow fuse (add X for external)8, 9
Internal slow-blow fuse (add X for external)8, 9
Plug-in wiring, specify 1, 2 or 3 branch circuits and
hot wires (A = black, B = red, C = blue, AB or AC)
TILW
CW
CSA
NOM
Tandem in-line wiring
Cold-weather ballast; 0°F starting temp
Meets Canadian standards
Meets Mexican standards
For additional product information, visit www.lithonia.com.
CONFIGURATIONS
LAMPS PER
LAMP TYPE
FIXTURE
1, 2
17, 20
1, 2
24HO
1, 2
CF39
1, 2
25, 30
1, 2
CF40
1, 2
36HO
1, 2
32, 48
1, 2
48HO
1, 2
CF50
1, 2
72
1, 2
72HO
2
25, 30
4
25, 30
1, 2
96, 96T8, 96T8HO
1, 2
96HO
2
32
4
32
LENGTH
IN. (CM)
24 (61.0)
24 (61.0)
24 (61.0)
36 (91.4)
36 (91.4)
36 (91.4)
48 (121.9)
48 (121.9)
48 (121.9)
72 (182.9)
72 (182.9)
72 (182.9)
72 (182.9)
96 (243.8)
96 (243.8)
96 (243.8)
96 (243.8)
WIDTH
IN. (CM)
4-1/4 (10.8)
4-1/4 (10.8)
4-1/2 (11.4)
4-1/4 (10.8)
4-1/2 (11.4)
4-1/4 (10.8)
4-1/4 (10.8)
4-1/4 (10.8)
4-1/2 (11.4)
4-1/4 (10.8)
4-1/4 (10.8)
4-1/4 (10.8)
4-1/4 (10.8)
4-1/4 (10.8)
4-1/4 (10.8)
4-1/4 (10.8)
4-1/4 (10.8)
Drawings are for dimensional detail only and may not represent actual
mechanical configuration. Dimensions are shown in inches (centimeters)
unless otherwise noted.
2-1/8
(5.4) 3
(7.6)
4-3/8
(11.1)
C
www.lithonia.com | 1-800-858-7763
2-3/4
(7.0) 3-7/8
(9.8)
4-3/8
(11.1)
CAL
4-1/2
(11.4)
4-1/2
(11.4)
1-7/8
(4.8) 3-1/8
(7.9)
1-7/8
(4.8) 3-1/8
(7.9)
CF 2-lamp
CF 4-lamp
1 For tandem double-length unit, add prefix T. Example: TC.
2 Consult www.lithonia.com for available options.
3 Order two 36" reflectors for 72" fixtures and two 48" reflectors
for 96" fixtures.
4 HO only available with aluminum (AL) version.
5
6
7
8
9
Available only with CSA option.
Not available in 347V.
Consult factory for additional T12 AND T12HO configurations.
Specify voltage.
Not available in Canada.
LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT
LAMPS PER
CROSS SECTION
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1
2
1, 2
1, 2
1
2
BINP T8 high-performance ballast, normal
ballast factor (.88), instant start
BIHP T8 high-performance ballast, high
ballast factor (1.2), instant start6
Notes
PSG10
C
Ballast disconnect provided
standard where required
to comply with U.S. and
Canadian electrical codes.
White specular reflectors
available. For reflectors and
wireguards options, see
pages 93-95.
Ballast
GEB10IS T8 electronic ballast, ≤ 10% THD,
instant start
GEB10RS T8 electronic ballast, ≤ 10% THD,
programmed rapid start
GEB
T12 electronic ballast, ≤ 20% THD
BILP
T8 high-performance ballast, low
ballast factor (.79), instant start
C /C AL
C AL
C
C /C AL
C
C AL
C /C AL
C AL
C
C /C AL
C AL
TC / TC AL
TC / TC AL
C /C AL
C AL
TC / TC AL
TC / TC AL
L-13
AWM, TFN, THHN wire
used throughout, rated for
required temperatures.
For shortest lead times, configure products using bolded options.
Series Number of lamps
1
2
Not included.
Optional aluminum channel
available, features corrosionresistant fasteners for use in
damp and harsh locations.
STRIPLIGHTS
General Purpose
PRODUCT INFORMATION
69
L-14
COMMALITE
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
L-14
Commalite
Page 1 of 3
TYPE:
Specification and Ordering Information:
1. Style:
CML - Commalite (CML)
2. Overall Run Length:
Specify total run length
3. Lamp Options:
FSO - Fluorescent - Standard Output T5 (FSO)
FHO - Fluorescent - High Output T5(FHO)
HP7- 3000 - High Performance LED White 3000° 7W/LF (HP7-3000)
HP7- 3500 - High Performance LED White 3500° 7W/LF (HP7-3500)
HP7- 4000 - High Performance LED White 4000° 7W/LF (HP7-3000)
HP14- 3000 - High Performance LED White 3000° 10W/LF (HP10-4000)
HP14- 3500 - High Performance LED White 3500° 14W/LF (HP14-3500)
HP14- 4000 - High Performance LED White 4000° 14W/LF (HP14-4000)
LED5WW- 3000 - Decorative, 290 LF Constant Voltage LED White 3000°
5W/LF (LED5WW-3000)
LED5CW- 4000 - Decorative, 290 LF Constant Voltage LED White 4000°
5W/LF (LED5CW-4000)
4. Standoff Length:
Specify any length 2”-36”
(For Cable Suspension - 48” Max)
INTERNAL WHITE HIGH TRANSMISSION (93% EFFICIENT)
LENS INCLUDED ON ALL COMMALITE UNITS
5. Ballast Specification:
Arm
LED - LED Power Supply, non-dim (LLED)
LED-DIM - LED Power Supply with 0-10V dimming (LED-DIM)
STD - Standard Electronic, non-dim <10%THD (LSTD)
MK7 - Advance Mark 7® Dimming 0-10V (MK7)
LMK10 - Advance Mark 10® Dimming (MK10)
HILUME - Lutron Hilume 3-D® (HILUME3D)
HILUME-A - Lutron Hilume A Series LED® (HILUME-A)
HSeries- Lutron H-SERIES® Dimming (HSERIES)
ECOSYS- Lutron ECOSYSTEM® Dimming (ECOSYS)
BALSTAR - Ballastar® Light level switching (BALSTAR)
USD - Superdim® Dimming (USD)
QUICK - Osram Quicktronic® DALI Dimming (QUICK)
*Please consult ballast manufacturer for lamp/ballast compatability.
1
3
1 4"
3 4"
330
1
2 4"
1
3 4"
1
4 2"
6. Mounting:
*JBOX2 - 2” canopy with integral 2” splice box (JBOX2)
JBOX4 - 4” canopy cover plate (JBOX4)
TIE-BACK - Wall Tie-Back (TIE-BACK)
ACSUSP - Aircraft cable suspended (ACSUSP)
* JBOX2 is standard unless otherwise noted.
7. Voltage:
JBOX2 (2-1/4” Canopy
with integral Junction
box)
120 volt
277 volt
UNV (Universal) voltage
347 volt (not available in dimming)
8. Finish:
* AL (Natural “Ultimatte” aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your choice)
* AL is standard on all Commalite product
9. Additional Options:
OS - Occupancy Sensor (OS)
PH - Photocell - Consult Factory (PH)
REM - Remote Emergency Ballast (REM)
STACK - Stack Light Mounting Option - Consult Factory (STACK)
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
JBOX4 (4-1/2” Canopy)
L-14
Commalite
Page 2 of 3
TYPE:
Lamp Configuration Chart: Individual and Continuous
Regular
2’
14 or 24w T5
1
21 or 39w T5
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
1
1
28 or 54w T5
35 or 80w T5
2
1
1
1
3
2
1
2
2
3
1
Typical Commalite row configurations: Additonal configurations and row lengths available. Consult factory for details.
48" CL
4ft (nominal)
1
47 4"
96" CL
8ft (nominal)
1
95 4"
48" CL
96" CL
12ft (nominal)
1
1
47 4"
95 4"
96" CL
96" CL
16ft (nominal)
1
1
95 4"
95 4"
Staggered lamping not applicable.
Standard: Wall/Ceiling
mount with integral 2”
Junction box and
canopy
Option: 4-1/2” Round Canopy
Option: Wall Tie-back
Option: Cable Suspension
TIE-BACK - Aircraft
cable wall tieback.Required on
extension over 36”
ACSUSP - Aircraft
cable suspension unit will be non-rotatable.
1
4 2"
JBOX2 - 2-1/4”W x 31/4”H canopy cover
plate with factory
supplied mini junction box.
JBOX4 (4-1/2” round
canopy). Junction box
not included.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
L-14
Commalite
Page 3 of 3
TYPE:
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Design Specifications
ACROSS
45
ALONG
Construction
Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable.
Reflectors are formed from .040 aluminum and finished in Titanium
white powdercoat.
Integral, 93.4% efficient, high-transmission optical lens for lamp
shielding and superior diffusion.
Cast Aluminum end-caps, machined aluminum rotational fittings.
Electrical Details
All ballasts are electronic <10% THD
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to channel (unless otherwise noted).
LED options available (consult factory)
Multiple interface options available including dimming, motion sensing, daylight harvesting and DALI.
ETL listed for Indoor location only.
Emergency
Remote Emergency Ballast
Emergency one-lamp ballasts provide 90 minutes of illumination.
T5/T5HO = Initial output of 1300 Lumens
Finish
All fixtures are standard in Ultimatte aluminum finish (AL) A deep etch and two-step clear anodizing process that
gives a smooth, clean and durable surface.
Powder Coat options are available. Consult factory.
1
Efficiency
54.5 %
200
Catalog # CML-4-28
400
600
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
L-15
LIGHTPLANE UP AND UNDER
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE LINEAR - Up & Under
Page 1 of 3
TYPE:
1. Style:
LPLUU-S - Lightplane Up and Under Suspended (LPLUU-S)
LPLUU-W - Lightplane Up and Under Wall (LPLUU-W)
2. Overall Run Length:
Individual (2’,3’,4’,5’,6’,7’,8’)
Continuous (Enter total run length, i.e 20’)
3. Indirect Lamping Option:
N/A - Open channel for downlighting only (N/A)
IFSO - Fluorescent - Standard Output (IFSO)
IFHO - Fluorescent - High Output (IFHO)
IHP7- 80 LPW High Performance LED White 3500° 7W/LF (IHP7)
IHP14- 80 LPW High Performance LED White 3500° 14W/LF (HP14)
IRGB - LED Color Changing (RGB)-Consult Factory for Control Interface
Options (IRGB)
IT8 - Fluorescent T8 (IT8)
ILXHO - Seamlessline lamp (ILXHO Feelux High Output)*
ILXHE - Seamlessline lamp (LXHE Feelux High Efficiency)*
*See Option 1A
4. Indirect Lamp Configuration:
R - Regular (R)
S - Staggered (S)
5. Indirect Lens Option:
WD - Satine Lens (WD)
*EXT - Extra Diffuse, Opal Lens (EXT)
RO - Open top, Reflector Only (RO)
DG - Flush guard lens - Indirect only (DG)
*The EXT Option is best for minimal lamp image.
3
5 8"
3
4 4"
1
2 4"
EXT - EXT
RO-EXT
6. Indirect Ballast Specification:
ILED - LED Power Supply, non-dim (ILED)
ILED-DIM - LED Power Supply with 0-10V dimming (ILED-DIM)
ISTD - Standard Electronic, non-dim <10%THD (ISTD)
IRGBSEQ - RGB with integral sequencer, no control (IRGBSEQ)
IRGBDIM - RGB with 0-10V Dimming Control Wires (controllers not included) (IRGBDIM)
IRGBDMX- RGB with DMX Interface module (DMX controller not included (IRGBDMX)
* IMK7 - Advance Mark 7® Dimming 0-10V (IMK7)
* IMK10 - Advance Mark 10® Dimming (IMK10)
* IHILUME3D - Lutron Hilume 3-D® (IHILUME3D)
** IHILUME-A - Lutron Hilume A Series LED® (IHILUME-A)
* IHSeries- Lutron H-SERIES® Dimming (IHSERIES)
* IECOSYS- Lutron ECOSYSTEM® Dimming (IECOSYS)
Design Specifications
* IBALSTAR - Ballastar® Light level switching (IBALSTAR)
* IUSD - Superdim® Dimming (IUSD)
Construction
* IQUICK - Osram Quicktronic® Dimming (IQUICK)
Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable.
*Please consult ballast manufacturer for lamp/ballast compatability.
Reflectors are formed from .040 aluminum and finished in Titanium
** OPTION FOR LINEAR LED ONLY
7. Direct Lamping Option:
N/A - Open channel for downlighting only (N/A)
DFSO - Fluorescent - Standard Output (DFSO)
DFHO - Fluorescent - High Output (DFHO)
**DHP7- 80 LPW High Performance LED White 3500° 7W/LF (DHP7)
DHP14- 80 LPW High Performance LED White 3500° 14W/LF (DHP14)
DMR16 - 50 W MR16 Halogen (DMR16)
DLED MR16 - 6W LED MR16 GU5.3 Base (DLEDMR16)
DRGB - LED Color Changing (DRGB)-Consult Factory for Control Interface Options
DT8 - Fluorescent T8 (DT8)
DXHO - Seamlessline lamp (DLXHO Feelux High Output)*
DLXHE - Seamlessline lamp (DLXHE Feelux High Efficiency)*
*See Option 1A
Continued on Next Page...
8FT suspension hardware included
Canopy to cover 4-O Junction Box
white powdercoat.
Lenses are made from twin layered extruded high-impact acrylic.
WD is a full frosted/transparent combination.
EXT is a half frosted/white combination.
Single piece construction aluminum louver with clear matte anodized finish.
Electrical Details
All ballasts are electronic <10% THD
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to channel (unless otherwise noted).
LED options available (consult factory)
Multiple interface options availiable including dimming, motion sensing, daylight harvesting and DALI.
ETL Listed
Non-lensed units rated for Indoor location only.
Lensed units rated for damp location.
Emergency
Fixtures can be wired for emergency circuit or emergency battery
backup.
Emergency one-lamp ballasts provide 90 minutes of illumination.
T5/T5HO = Initial output of 1300 Lumens
Finish
All fixtures are standard in Ultimatte aluminum finish (AL) - A deep
etch and two-step clear anodizing process that gives a smooth,
clean and durable surface.
Powder Coat options are available. Consult factory.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE LINEAR - Up and Under
Page 2 of 3
TYPE:
8. Direct Lamp Configuration:
R - Regular (R)
S - Staggered (S)
9. Direct Lens Option:
WD - Satine Lens (WD)
*EXT - Extra Diffuse, Opal Lens (EXT)
*The EXT Option is best for minimal lamp image.
10. Direct Ballast Specification:
DLED - LED Power Supply, non-dim (DLED)
DLED-DIM - LED Power Supply with 0-10V dimming (DLED-DIM)
DSTD - Standard Electronic, non-dim <10%THD (DSTD)
DRGBSEQ - RGB with integral sequencer, no control (DRGBSEQ)
DRGBDIM - RGB with 0-10V Dimming Control Wires (controllers not included) (DRGBDIM)
DRGBDMX- RGB with DMX Interface module (DMX controller not included (DRGBDMX)
* DMK7 - Advance Mark 7® Dimming 0-10V (DMK7)
* DMK10 - Advance Mark 10® Dimming (DMK10)
* DHILUME3D - Lutron Hilume 3-D® (DHILUME3D)
** DHILUME-A - Lutron Hilume A Series LED® (DHILUME-A)
* DHSeries- Lutron H-SERIES® Dimming (DHSERIES)
* DECOSYS- Lutron ECOSYSTEM® Dimming (DECOSYS)
* DBALSTAR - Ballastar® Light level switching (DBALSTAR)
* DUSD - Superdim® Dimming (DUSD)
Lamp Configuration Chart: Individual and Continuous
* DQUICK - Osram Quicktronic® Dimming (DQUICK)
*Please consult ballast manufacturer for lamp/ballast compatability.
Regular
2’ 3’
4’
5’
6’
7’
8’
9’ 10’ 11’ 12’
** OPTION FOR LINEAR LED ONLY
14 or 24w T5
1
1
21 or 39w T5
11. Voltage:
1
28 or 54w T5
120 (120V)
277 (277V)
UNV (120/277 V)
347 (347V non-dim only))
2
1
35 or 80w T5
Staggered
2’
3’
21 or 39w T5
* AL (Natural “Ultimatte” aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your choice)
3
1
2
7’
8’
1
2
2
3
9’
10’
11’
12’
2
1
1
2
1
4’
14 or 24w T5
12.. Finish:
1
28 or 54w T5
5’
6’
.
.
.
1
1
3
2
3
3
1
35 or 80w T5
* AL is standard on all LPL product
Design Specifications
Construction
Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable.
Reflectors are formed from .040 aluminum and finished in Titanium
white powdercoat.
Lenses are made from twin layered extruded high-impact acrylic.
WD is a full frosted/transparent combination.
EXT is a half frosted/white combination.
Single piece construction aluminum louver with clear matte anodized finish.
Electrical Details
All ballasts are electronic <10% THD
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to channel (unless otherwise noted).
LED options available (consult factory)
Multiple interface options availiable including dimming, motion sensing, daylight harvesting and DALI.
ETL Listed
Non-lensed units rated for Indoor location only.
Lensed units rated for damp location.
Emergency
Fixtures can be wired for emergency circuit or emergency battery
backup.
Emergency one-lamp ballasts provide 90 minutes of illumination.
T5/T5HO = Initial output of 1300 Lumens
Finish
All fixtures are standard in Ultimatte aluminum finish (AL) - A deep
etch and two-step clear anodizing process that gives a smooth,
clean and durable surface.
Powder Coat options are available. Consult factory.
*1A - Option: Seamlessline Lamp (LX) End to End Lamp Mounting
*Channel dimensions identical to standard T5 lamping. Luminous
ends eliminate the need for staggered lamping. Consult factory
for additional details.
180
150
120
Spacing Criterion
1.2
1.3
Efficiency
74.9 %
90
300
60
600
0
ACROSS
45
ALONG
Catalog # LPLUU-4-FSO-RO-WD
30
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE LINEAR - Up and Under
Page 3 of 3
TYPE:
Standard: Pendant Wire Mounting with adjustable aircraft cable suspension
*4-1/2” dia. canopy
to cover 4-O Octagon Junction box Bullet Aircraft cable
suspension.
*Adjustable GripLock cable suspension
Option: Seismic Bracing
Option: Mitered Angles
Aircraft cable can
mount on side of
channel to seismic
anchoring.
Consult Factory for
angle options.
*8FT suspension hardware is standard on all
ALW suspended fixtures
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that gives
and durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
Catalog Number
Notes
Type
L-16
FEATURES & SPECIFICATIONS
1-3/4" deep design uses T8 or T12 lamps.
Undercabinet Light
Ideal for work stations and under cabinets, unit or row mounting.
2UC
Low brightness, linear prism acrylic lens standard.
Convenience outlet and on/off rocker switch available.
Diffuser snaps easily into fixture body flanges.
Certain airborne contaminants can diminish integrity of acrylic. Click here
for Acrylic Environmental Compatibility table for suitable uses.
BALLAST — Thermally-protected, resetting, Class P, HPF, non-PCB, UL listed
ballast is standard on all T8 and T12 30W and 40W fixtures. Sound rating A.
Standard combinations are CBM approved.
T5, T8 or T12 Lamps
4 Lengths
WIRING & ELECTRICAL — Fixture bears UL label and is suitable for damp
locations. AWM, TFN or THHN wire used throughout, rated for required temperatures.
MATERIALS — Metal parts manufactured from code gauge steel. Diffuser is
100% acrylic. No asbestos is used in this product.
FINISH — Five-stage iron-phosphate pretreatment ensures superior paint
adhesion and rust resistance. High gloss, baked white enamel finish.
LISTING — UL listed. Labeled I.B.E.W.—A.F. of L.
Fixture guaranteed for one year against mechanical defects in manufacture. Specifications
subject to change without notice.
ORDERING INFORMATION
2UC
1
Series
Number of lamps
2UC
1
Not included.
Lead times will vary depending on options selected. Consult with your sales representative.
Example: 2UC 1 25 MVOLT
Lamp type/wattage
15
17
25
32
14T5
21T5
28T5
Convenience outlet and
rocker switch optional
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
15W T12 (18")
17W T8 (24")
25W T8 (36")
32W T8 (48")
14W T54
21W T54
28W T54
1,2,3
Lens
Voltage
(blank) Acrylic,
milk white
AR High
impact
resistant
acrylic
120
277
347
MVOLT
Others available,
Consult factory.
Options
LP
SWR
CO
CSA
GLR
GEB
GEB10IS
GEB10PS
Cool white lamps (installed)
Rocker switch (120V only)
Convenience outlet (120 only)
Labeled for shipment to
Canada
Internal fast blow fuse
Electronic ballast, < 20% THD
Instant start electronic
ballast, < 10% THD
Program start electronic
ballast, < 10% THD
NOTES:
1 Low power factor ballast (LPF) standard. High power factor and electronic ballast
(HPF) optional. HPF, LPF or GEB must be specified in options box.
2 277V configurations must be ordered with electronic ballast.
3 15W not available with MVOLT.
4 T5 configurations require GEB10PS.
Fluorescent
Sheet #: 2UC
UNC-120
2UC Undercabinet Light
MOUNTING DATA
DIMENSIONS
Inches (centimeters). Subject
to change without notice.
Lithonia Lighting
Sheet #: 2UC
©1996‡Óä£ä Acuity Brands Lighting, Inc., All rights reserved, Rev. ÇÉ1Ó/£ä
Fluorescent
One Lithonia Way, Conyers, GA 30012
Phone: 800-858-7763
www.lithonia.com
L-17
drywall
s ee m 4 a sy m m e t ric
®
features
Narrow 4” asymmetric slot wall wash
fluorescent that integrates luminaire with
ceiling for clean unobtrusive aesthetic.
Precision micro-optic delivers shadow free
illumination from ceiling to floor.
Allows for individual or continuous row
mount in trim flange or trimless drywall
applications.
Available in 1 lamp T8, T5 or T5HO
configurations.
Delivers high levels of vertical illumination
to highlight artwork, white boards or
displays.
shielding options
dimensional data
trimless mud-in
trim flange
5.63"
143.0mm
4.00"
101.6mm
5.00"
127.0mm
4.88"
124.0mm
open optic
4.00"
101.6mm
5.30"
134.6mm
7.53"
191.3mm
clear lens
baffle
companion luminaires
recessed
suspended
wall mount
note: 0.375"min - 2.125"max ceiling thickness
sheilding options
open optic
lens
baffle
performance
1–Lamp T5HO - No Shielding
53% Efficiency
1690 cd @ 20°
Visit focalpointlights.com for
complete photometric data.
www.focalpointlights.com | 1.773.247.9494
may 2013 E
5.53"
140.5mm
fixture:
project:
ordering
ordering
XXX
FSM4A
ordering
luminaire
header
series
ordering
text
XXX
Seem
4 Asymmetric
FSM4A
ordering fine print
shielding
No Shielding, Open Optic
Snap-in Clear Lens
Radial Cut-Off Baffle
NS
CL
RL
(Baffle always painted white)
lamping
One Lamp T8
One Lamp T5
One Lamp T5HO
1T8
1T5
1T5HO
1C
circuits
Single Circuit
1C
voltage
120 Volt
277 Volt
347 Volt
120
277
347
ballast
Electronic Instant Start <20% THD
E
(T8 only)
specifications
Electronic Program Start <10% THD S
Electronic Dimming Ballast* D
One piece, .07” thick housing of 6063-T5 extruded aluminum.
20 Ga. steel end caps.
Mud-in Luminaires include trimless aluminum flange.
2’
3’
4’
5’
6’
8’
unit
unit
unit
unit
unit
unit
weight:
weight:
weight:
weight:
weight:
weight:
18
24
30
36
43
55
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
mounting
Trim Flange
Mud-in Trimless, pre-set for 1/2" Drywall
Mud-in Trimless, pre-set for 5/8" Drywall
Mud-in Trimless, set thickness in field
TF
XF1
XF2
XFF
(mounting equipment assembled in field)
Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | T: 773.247.9494 | F: 773.247.8484 | info@focalpointlights.com | www.focalpointlights.com.
Focal Point LLC reserves the right to change specifications for product improvement without notification.
construction
factory options
Chicago Plenum CP
Emergency Circuit* EC
Emergency Battery Pack* EM
Flex Whip* FW
HLR/GLR Fuse FU
optic
Include 3000K lamp
L830
.020” specular aluminum upper reflector and 0.20” semi-specular lower reflector.
Matte black extruded aluminum diffuser.
24 Ga. Steel Radial cut off baffle.
Include 3500K lamp
L835
Include 4100K lamp
L841
electrical
Luminaires are pre–wired with factory installed branch circuit wiring and
over-molded quick connects.
Electronic fluorescent ballasts are thermally protected and have a Class “P” rating.
Optional dimming ballasts available.
UL and cUL listed.
WH
finish
Matte White
WH
luminaire length
(lengths are nominal)
Specify luminaire/row length
in 1' increments
X'
(3’ minimum)
finish
Polyester powder coat applied over a 5-stage pre–treatment.
* for more information see Reference section.
* for more information see Reference section.
recessed
363
recessed asymmetric - drywall/grid
seem 4
Filename:
FSM4ANS1T5HO.IES
Catalog #:
FSM4A-NS-1T5HO-1C-120-S-G1-WH-4’
Efficiency:
53%
TM
Test #:
80°
70°
60°
50°
10°
20°
30°
40°
90°
45°
0°
45°
90°
0°
0°
Horizontal Angle
22.5°
45°
67.5°
90°
Zonal
Lumens
Zone Lumens
%
Lamp
%
Fixt
0°
289
289
289
289
289
0°-30°
506
10.1
19.0
5°
663
613
523
403
268
33
0°-40°
930
18.6
34.9
15°
1459 1363
1064
659
255
158
0°-60°
1883
37.7
70.7
25°
1652 1636
1509
930
223
315
0°-90°
2665
53.3
100.0
35°
1488 1480
1415
1111
199
424
0°-180°
2665
53.3
100
45°
1401 1305
1185
1052
139
474
55°
1264 1226
1083
857
105
480
65°
1012
984
858
609
58
404
75°
637
613
537
403
31
274
85°
268
252
203
128
7
104
90°
142
128
88
32
0
95°
0
0
0
0
0
0
105°
0
0
0
0
0
115°
0
0
0
0
0
125°
0
0
0
0
135°
0
0
0
145°
0
0
155°
0
165°
Total
Luminaire
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
80
70 50 30 10
70
70 50 10
20
50
50 10
RCR 0
63 63 63 63
62 62 62
1
57 55 522 50
56 53 49
0
2
52 47 43 40
0
3
47 41 36 33
0
0
4
0
0
0
0
0
0
0
0
0
0
0
0
175°
0
0
180°
0
0
30
50 10
10
50 10
00
00
59 59
57 57
54 54
53
51 47
49 46
47 45
43
50 46 39
44 38
42 37
41 37
35
43 40 32
39 32
37 31
36 31
29
43 36 31 27
41 35 27
34 26
33 26
31 26
25
5
39 31 26 22
37 31 22
29 22
28 22
27 21
20
0
6
35 28 22 19
34 27 19
26 18
24 18
24 18
17
0
0
7
32 24 19 16
31 24 16
23 16
22 16
22 15
14
0
0
0
8
29 22 17 13
29 21 13
20 13
20 13
19 13
12
0
0
0
0
9
27 19 14 11
26 19 11
18 11
18 11
17 11
10
0
0
0
10
25 17 13 10
24 17 10
16 10
16 10
15 9
8
Numbers indicate percentage values of reflectivity.
90°
0°
LUMEN SUMMARY
Vertical
Angle
1690
1352
1014
676
338
0
CANDLEPOWER DISTRIBUTION
16062.0
Go to www.focalpointlights.com for additional photometric data.
recessed asymmetric - drywall/grid
seem 4
Filename:
FSM4ARL1T5HO.IES
Catalog #:
FSM4A-RL-1T5HO-1C-120-S-G1-WH-4’
Efficiency:
45%
TM
Test #:
LUMEN SUMMARY
90°
0°
70°
60°
0°
45°
90°
10°
20°
30°
40°
90°
45°
0°
546
812
90°
546
546
546
Zonal
Lumens
%
Lamp
%
Fixt
0°-30°
603
12.1
27.1
46.1
Zone Lumens
793
725
632
533
55
0°-40°
1026
20.5
1509 1413
1129
793
509
203
0°-60°
1812
36.2
81.4
25°
1681 1593
1395
892
465
345
0°-90°
2225
44.5
100.0
35°
1517 1382
1190
899
399
423
0°-180°
2225
44.5
100
45°
1415 1157
883
678
294
414
55°
1229
976
661
46
230
371
65°
880
644
365
215
151
248
75°
429
303
179
127
83
124
85° 116
106
79
49
21
42
50°
0°
Horizontal Angle
22.5°
45°
67.5°
15°
5°
80°
0°
546
Total
Luminaire
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
80
70 50 30 10
70
70 50 10
20
50
50 10
30
50 10
10
50 10
00
00
90°
69
65
44
21
0
RCR 0
53 53 53 53
52 52 52
49 49
47 47
45 45
45
95°
0
0
0
0
0
0
1
49 47 45 44
48 46 43
44 41
42 40
41 39
38
105°
0
0
0
0
0
0
2
45 41 39 36
44 41 36
39 35
38 34
36 33
33
115°
0
0
0
0
0
0
3
41 37 33 31
40 36 30
35 30
34 29
32 29
28
125°
0
0
0
0
0
0
4
38 33 29 26
37 32 26
31 26
30 25
29 25
24
135°
0
0
0
0
0
0
5
34 29 25 22
34 28 22
27 22
27 22
26 21
20
145°
0
0
0
0
0
0
6
32 26 22 19
31 25 19
25 19
24 19
23 19
18
155°
0
0
0
0
0
0
7
29 23 19 17
28 23 16
22 16
21 16
21 16
15
165°
0
0
0
0
0
0
8
27 21 17 14
26 20 14
20 14
19 14
19 14
13
175°
0
0
0
0
0
0
9
25 18 15 12
24 18 12
18 12
17 12
17 12
11
180°
0
0
0
0
0
10
23 17 13 11
22 16 11
16 11
16 11
15 10
10
Numbers indicate percentage values of reflectivity.
Vertical
Angle
1722
1378
1033
689
344
0
CANDLEPOWER DISTRIBUTION
16063.0
Go to www.focalpointlights.com for additional photometric data.
recessed asymmetric - drywall
seem 4
Filename:
FSM4ANS1T8.IES
Catalog #:
FSM4A-NS-1T8-1C-120-S-TF-WH-4’
Efficiency:
50%
TM
Test #:
80°
70°
60°
50°
10°
20°
30°
40°
0°
45°
90°
0°
Horizontal Angle
22.5°
45°
67.5°
90°
Zonal
Lumens
Zone Lumens
%
Lamp
%
Fixt
0°
356
356
356
356
356
0°-30°
318
10.8
21.4
5°
531
511
468
409
348
35
0°-40°
552
18.7
37.2
15°
755
726
647
519
336
106
0°-60°
1053
35.7
70.8
25°
856
834
758
578
310
177
0°-90°
1486
50.4
100
35°
837
821
762
611
275
235
0°-180°
1486
50.4
100
45°
708
697
654
541
213
248
55°
632
611
568
479
165
252
65°
501
485
431
358
103
213
Total
Luminaire
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
80
70 50 30 10
70
70 50 10
20
50
50 10
30
50 10
10
50 10
00
00
RCR 0
60 60 60 60
59 59 59
56 56
54 54
51 51
50
1
54 52 49 47
53 50 46
48 45
46 43
44 42
41
0
2
49 45 41 38
48 44 37
42 36
40 36
39 35
34
0
0
3
45 39 35 31
43 38 31
37 30
35 30
34 29
28
0
0
0
4
41 34 30 26
39 34 26
32 26
31 25
30 25
24
0
0
0
0
5
37 30 25 22
36 29 22
28 21
27 21
26 21
20
0
0
0
0
0
6
34 27 22 18
33 26 18
25 18
24 18
23 18
17
0
0
0
0
0
0
7
31 4 19 16
30 23 16
23 16
22 15
21 15
14
165°
0
0
0
0
0
0
8
28 21 17 14
28 21 13
20 13
19 12
19 13
12
175°
0
0
0
0
0
0
9
26 19 14 12
25 19 11
18 11
17 11
17 11
10
180°
0
0
0
0
0
10
24 17 13 10
24 17 10
13 10
13 10
15 10
9
75°
356
342
293
219
50
151
90°
45°
85°
186
171
135
81
7
69
0°
90°
121
108
73
30
0
95°
0
0
0
0
0
0
105°
0
0
0
0
0
115°
0
0
0
0
125°
0
0
0
135°
0
0
145°
0
155°
Numbers indicate percentage values of reflectivity.
90°
Go to www.focalpointlights.com for additional photometric data.
recessed asymmetric - grid
seem 4
Filename:
FSM4ANS1T8.IES
Catalog #:
FSM4A-NS-1T8-1C-120-S-G1-WH-4’
Efficiency:
50%
TM
Test #:
60°
50°
0°
0°
45°
90°
10°
20°
30°
40°
90°
45°
0°
Horizontal Angle
22.5°
45°
67.5°
90°
622
622
622
622
622
Zonal
Lumens
%
Lamp
%
Fixt
473
16.0
31.8
Zone Lumens
0°-30°
5°
755
745
712
663
617
60
0°-40°
742
25.1
49.9
15°
902
890
843
744
601
169
0°-60°
1195
40.5
80.4
25°
867
867
862
774
547
244
0°-90°
1487
50.4
100
35°
749
755
759
724
471
268
0°-180°
1487
50.4
100
45°
555
563
590
572
351
243
55°
434
438
446
464
273
210
65°
310
297
286
291
170
150
75°
234
217
170
130
71
92
85° 153
135
99
48
3
50
80°
70°
0°
0°
Total
Luminaire
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
80
70 50 30 10
70
70 50 10
20
50
50 10
30
50 10
10
50 10
00
00
90°
104
93
62
21
0
RCR 0
60 60 60 60
59 59 59
56 56
54 54
51 51
50
95°
0
0
0
0
0
0
1
55 53 51 49
54 52 48
50 47
48 45
46 44
43
105°
0
0
0
0
0
0
2
51 47 44 41
49 46 40
44 39
43 39
41 38
37
115°
0
0
0
0
0
0
3
47 42 38 35
46 41 35
40 34
38 33
37 33
32
125°
0
0
0
0
0
0
4
43 37 33 30
42 37 30
36 30
34 29
33 29
28
135°
0
0
0
0
0
0
5
40 33 29 26
38 33 26
32 25
31 25
30 25
24
145°
0
0
0
0
0
0
6
37 30 26 23
36 30 23
29 22
28 22
27 22
21
155°
0
0
0
0
0
0
7
34 27 23 20
33 27 20
26 20
25 20
25 20
19
165°
0
0
0
0
0
0
8
31 25 20 18
30 24 17
24 17
23 17
22 17
16
175°
0
0
0
0
0
0
9
29 22 18 15
28 22 15
21 15
21 15
20 15
14
180°
0
0
0
0
0
10
27 20 16 14
26 20 14
19 14
19 13
18 13
13
Numbers indicate percentage values of reflectivity.
90°
15906.0
LUMEN SUMMARY
Vertical
Angle
902
541
361
180
0
CANDLEPOWER DISTRIBUTION
722
0°
LUMEN SUMMARY
Vertical
Angle
902
722
541
361
180
0
CANDLEPOWER DISTRIBUTION
16231.0
Go to www.focalpointlights.com for additional photometric data.
L-17A
grid
s ee m 4 a sy m m e t ric
®
features
Narrow 4” asymmetric slot wall wash
fluorescent that integrates luminaire with
ceiling for clean unobtrusive aesthetic.
Precision micro-optic delivers shadow free
illumination from ceiling to floor.
Allows for individual or continuous row
mount in grid ceilings.
Available in 1 lamp T5 or T5HO
configurations.
Delivers high levels of vertical illumination
to highlight artwork, white boards or
displays.
shielding options
dimensional data
open optic
baffle
companion luminaires
recessed
suspended
wall mount
5.00"
127mm
sheilding options
open optic
lens
baffle
performance
1–Lamp T5HO - No Shielding
53% Efficiency
1690 cd @ 20°
Visit focalpointlights.com for
complete photometric data.
www.focalpointlights.com | 1.773.247.9494
may 2013 B
4.88"
124.0mm
4.00"
102mm
clear lens
fixture:
project:
ordering
ordering
suspensioninformation
mounting
information
luminaire series
ordering header
grid
Seem 4
Asymmetric
ordering
text
FSM4A
XXX
FSM4A
XXX
ordering fine print
shielding
1 1/ 2"
1 1/ 2"
1 1/ 2"
9/ 16"
15/ 16"
9⁄ 16"
Slot tee
G3
Standard
G2, T2
Standard
G1, T1
No Shielding, Open Optic
Snap-in Clear Lens
Radial Cut-Off Baffle
NS
CL
RL
(Baffle always painted white)
lamping
lay-in tile (G)
1 11/ 16"
1 11/ 16"
tegular tile (T)
1 1/ 2"
Luminaire always rests at level of tile.
15/ 16"
Tall
G4, T4
9/ 16"
9/ 16"
Tall
G5, T5
Node
T6
One Lamp T5
One Lamp T5HO
1T5
1T5HO
1C
circuits
Single Circuit
1C
voltage
120 Volt
277 Volt
347 Volt
120
277
347
ballast
Electronic Program Start <10% THD
S
Electronic Dimming Ballast* D
ceiling configurations
construction
One piece, .07” thick housing of 6063-T5 extruded aluminum.
16 Ga. internal bulkhead. 20 Ga. steel end caps.
Grid Luminaires include 22 Ga. steel, .35” wide flange rail finished in Matte
Satin White.
Earthquake clips standard on all grid luminaires.
2’
3’
4’
5’
6’
8’
unit
unit
unit
unit
unit
unit
weight:
weight:
weight:
weight:
weight:
weight:
18
24
30
36
43
55
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
optic
.020” specular aluminum upper reflector and 0.20” semi-specular lower reflector.
Matte black extruded aluminum diffuser.
24 Ga. Steel Radial cut off baffle.
electrical
Luminaires are pre–wired with factory installed branch circuit wiring and
over-molded quick connects.
Electronic fluorescent ballasts are thermally protected and have a Class “P” rating.
Optional dimming ballasts available.
UL and cUL listed.
finish
Polyester powder coat applied over a 5-stage pre–treatment.
Std. 15/16" Lay-in
Std. 15/16" Tegular
Std. 9/16" Lay-in
Std. 9/16" Tegular
9/16" Slot-tee Tegular
Tall 15/16" Lay-in
Tall 15/16" Tegular
Tall 9/16" Lay-in
Tall 9/16" Tegular
Node 9/16" Tegular
G1
T1
G2
T2
G3
G4
T4
G5
T5
T6
Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | T: 773.247.9494 | F: 773.247.8484 | info@focalpointlights.com | www.focalpointlights.com.
Focal Point LLC reserves the right to change specifications for product improvement without notification.
specifications
factory options
Chicago Plenum
CP
Emergency Circuit* EC
Emergency Battery Pack* EM
Flex Whip* FW
HLR/GLR Fuse
FU
Include 3000K lamp
L830
Include 3500K lamp
L835
Include 4100K lamp
L841
WH
finish
Matte White
WH
luminaire length
(designed to fit standard grid lengths)
Specify luminaire/row length
in 1' increments
X'
(3’ minimum)
(consult factory for 5' dimming)
* for more information see Reference section.
* for more information see Reference section.
recessed
363
recessed asymmetric - drywall/grid
seem 4
Filename:
FSM4ANS1T5HO.IES
Catalog #:
FSM4A-NS-1T5HO-1C-120-S-G1-WH-4’
Efficiency:
53%
TM
Test #:
80°
70°
60°
50°
10°
20°
30°
40°
90°
45°
0°
45°
90°
0°
0°
Horizontal Angle
22.5°
45°
67.5°
90°
Zonal
Lumens
Zone Lumens
%
Lamp
%
Fixt
0°
289
289
289
289
289
0°-30°
506
10.1
19.0
5°
663
613
523
403
268
33
0°-40°
930
18.6
34.9
15°
1459 1363
1064
659
255
158
0°-60°
1883
37.7
70.7
25°
1652 1636
1509
930
223
315
0°-90°
2665
53.3
100.0
35°
1488 1480
1415
1111
199
424
0°-180°
2665
53.3
100
45°
1401 1305
1185
1052
139
474
55°
1264 1226
1083
857
105
480
65°
1012
984
858
609
58
404
75°
637
613
537
403
31
274
85°
268
252
203
128
7
104
90°
142
128
88
32
0
95°
0
0
0
0
0
0
105°
0
0
0
0
0
115°
0
0
0
0
125°
0
0
0
0
135°
0
0
0
145°
0
0
155°
0
165°
Total
Luminaire
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
80
70 50 30 10
70
70 50 10
20
50
50 10
30
50 10
10
50 10
00
00
RCR 0
63 63 63 63
62 62 62
59 59
57 57
54 54
53
1
57 55 522 50
56 53 49
51 47
49 46
47 45
43
0
2
52 47 43 40
50 46 39
44 38
42 37
41 37
35
0
0
3
47 41 36 33
43 40 32
39 32
37 31
36 31
29
0
0
4
43 36 31 27
41 35 27
34 26
33 26
31 26
25
0
0
0
5
39 31 26 22
37 31 22
29 22
28 22
27 21
20
0
0
0
0
6
35 28 22 19
34 27 19
26 18
24 18
24 18
17
0
0
0
0
0
7
32 24 19 16
31 24 16
23 16
22 16
22 15
14
0
0
0
0
0
0
8
29 22 17 13
29 21 13
20 13
20 13
19 13
12
175°
0
0
0
0
0
0
9
27 19 14 11
26 19 11
18 11
18 11
17 11
10
180°
0
0
0
0
0
10
25 17 13 10
24 17 10
16 10
16 10
15 9
8
Numbers indicate percentage values of reflectivity.
90°
0°
LUMEN SUMMARY
Vertical
Angle
1690
1352
1014
676
338
0
CANDLEPOWER DISTRIBUTION
16062.0
Go to www.focalpointlights.com for additional photometric data.
recessed asymmetric - drywall/grid
seem 4
Filename:
FSM4ARL1T5HO.IES
Catalog #:
FSM4A-RL-1T5HO-1C-120-S-G1-WH-4’
Efficiency:
45%
TM
Test #:
LUMEN SUMMARY
90°
0°
70°
60°
0°
45°
90°
10°
20°
30°
40°
90°
45°
0°
546
812
90°
546
546
546
Zonal
Lumens
%
Lamp
%
Fixt
0°-30°
603
12.1
27.1
46.1
Zone Lumens
793
725
632
533
55
0°-40°
1026
20.5
1509 1413
1129
793
509
203
0°-60°
1812
36.2
81.4
25°
1681 1593
1395
892
465
345
0°-90°
2225
44.5
100.0
35°
1517 1382
1190
899
399
423
0°-180°
2225
44.5
100
45°
1415 1157
883
678
294
414
55°
1229
976
661
46
230
371
65°
880
644
365
215
151
248
75°
429
303
179
127
83
124
85° 116
106
79
49
21
42
50°
0°
Horizontal Angle
22.5°
45°
67.5°
15°
5°
80°
0°
546
Total
Luminaire
CO–EFFICIENTS OF UTILIZATION
Floor
Ceiling
Wall
80
70 50 30 10
70
70 50 10
20
50
50 10
30
50 10
10
50 10
00
00
90°
69
65
44
21
0
RCR 0
53 53 53 53
52 52 52
49 49
47 47
45 45
45
95°
0
0
0
0
0
0
1
49 47 45 44
48 46 43
44 41
42 40
41 39
38
105°
0
0
0
0
0
0
2
45 41 39 36
44 41 36
39 35
38 34
36 33
33
115°
0
0
0
0
0
0
3
41 37 33 31
40 36 30
35 30
34 29
32 29
28
125°
0
0
0
0
0
0
4
38 33 29 26
37 32 26
31 26
30 25
29 25
24
135°
0
0
0
0
0
0
5
34 29 25 22
34 28 22
27 22
27 22
26 21
20
145°
0
0
0
0
0
0
6
32 26 22 19
31 25 19
25 19
24 19
23 19
18
155°
0
0
0
0
0
0
7
29 23 19 17
28 23 16
22 16
21 16
21 16
15
165°
0
0
0
0
0
0
8
27 21 17 14
26 20 14
20 14
19 14
19 14
13
175°
0
0
0
0
0
0
9
25 18 15 12
24 18 12
18 12
17 12
17 12
11
180°
0
0
0
0
0
10
23 17 13 11
22 16 11
16 11
16 11
15 10
10
Numbers indicate percentage values of reflectivity.
Vertical
Angle
1722
1378
1033
689
344
0
CANDLEPOWER DISTRIBUTION
16063.0
Go to www.focalpointlights.com for additional photometric data.
PROJECT INFORMATION
MILLENIUM STRETCH™
Job Name
MLHA8 SERIES
Fixture Type
Catalog Number
PRODUCT FEATURES:
Approved by
» Surface mount – wall or ceiling; nominal 8"×24",
8"×36" 8"×48", 8"×72", 8"×96"
Flat End Cap
L-18
» Individual luminaires
®
» Peace of Mind Guarantee against breakage
» ADA compliant
Rounded End Cap
Reveal End Cap
SPECIFICATIONS
HOUSING: Marine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering
Information for standard, optional, architectural and custom finishes.
REFLECTOR: Full reflector/wire cover – 92% reflectivity.
LENS:67TUBCJMJ[FEIJHIJNQBDUFYUSVEFEDMFBSPSQFBSMFTDFOUQPMZDBSCPOBUF4NPPUIFYUFSJPSMJOFBSQSJTNBUJDJOUFSJPS/PNJOBMUIJDLOFTT-FOTTFDVSFMZQPTJUJPOFEJOCPEZDIBOOFMTBOEFOE
caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.
END CAPS: Marine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded
styles only).
SOCKETS: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.
HARDWARE: Stainless steel, tamper-resistant Torx fasteners secure lens in housing body’s lens channel (four on 24", 36", and 48" housings; eight on 72" and 96" housings).
ELECTRICAL: LED: Replaceable high-brightness LED array in 4000K, 5000K and 5700K color temperatures. 120-277V AC high power factor constant current driver. 10-100% dimming with
compatible 0-10V current-sink dimmer. Compatible with Kenall SmartSense™ control system. Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor.
INSTALLATION: Standard four-point (24" housing), six-point (36" and 48" housing) and twelve-point (72" and 96" housing) mounting required for Peace of Mind Guarantee®.
PATENT:641BUFOU/PTBOE
PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric information, go to www.kenall.com.
WARRANTY: One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.
LISTINGS:6-BOE$6-MJTUFEGPS8FU-PDBUJPOoDPWFSFEDFJMJOHNPVOU6-DFSUJåFE*1JODPNQMJBODFXJUI*&$oDFJMJOHNPVOU$PSOFSIPSJ[POUBMXBMMBOEQFOEBOUNPVOUJOTUBMMBUJPOo
damp location only. ADA compliant.
LED
IP64
ADA
ORDERING INFORMATION (Ex: MLHA8-48-F-MB-CP-50L40K-DCC-DV-FS-9500)
Model
Length
End Cap
Finish
Lens
Lamp Qty
Ballast/Driver Type
Lamp Type
Circuit Qty
Voltage
Options
Accessories
MLHA8
Length
24
2'
36
3'
48
4'
72
Two 3' (factory connected)
96
Two 4' (factory connected)
End Caps
F
Flat
R
Rounded
RV Reveal
Lamp Type
2' Lengths
14
F14T5 (rapid start only)
17
F17T8
V
F24T5HO (rapid start only)
24
Circuit Quantity (n/a with LED)
1
One
2pt 5XP#BMMBTUNJOJNVN
Voltage
120 120 Volts
277 277 Volts
347 347 Volts (T8,T5HO)
DV 120-277 Volts
3' Lengths
21
F21T5 (rapid start only)
25
F25T8
39
F39T5HO (rapid start only)
4' Lengths
50L40K 50 Watt 4000K LED (1/DCC/120-277V/-40°F)
Finish
50L50K 50 Watt 5000K LED (1/DCC/120-277V/-40°F)
LG Light Gray
50L57K 50 Watt 5700K LED (1/DCC/120-277V/-40°F)
MB Matte Black
100L40K 100 Watt 4000K LED (1/DCC/120-277V/-40°F)
MW Matte White
CC Custom Color (Consult Factory) 100L50K 100 Watt 5000K LED (1/DCC/120-277V/-40°F)
100L57K 100 Watt 5700K LED (1/DCC/120-277V/-40°F)
28
F28T5 (rapid start only)
Lens
32
F32T8
CP Clear Polycarbonate
54
F54T5HO (rapid start only)
PP
Pearlescent Polycarbonate
54A
F54T5HO amalgam (rapid start only)
Lamp Quantity (Cross Section)
Ballast/Driver Type
(n/a with LED)
IS
Instant Start Electronic <10% THD (T8)
1
One
RS
Rapid Start Electronic <10% THD (T8,T5,T5HO)
2
Two
SB
Specified Ballast
3
Three (T8 or T5 only)
DCC Dimming Constant Current (LED)
www.kenall.com
P: 800-4-Kenall
Options
ELVWtf
.JOJNVN-VNFO#BUUFSZ1BDL
(90 Minutes; 32°F Starting Temp)
PEL tf .JOJNVN-VNFO#BUUFSZ1BDL
(90 Minutes; 32°F Starting Temp)
LED
Emergency Battery Backup
LEL
(50L max)
CDF
Captive Diffuser Fasteners
CMB
Corner Mount Bracket (damp only)
DL
Damp Location (Interior use
NO gasketing)
FS
Single Fuse & Holder (one per circuit)
NATf
/BUBUPSJVN&OWJSPONFOU0QUJPO
NSF
National Sanitation Foundation Listed
PH
Phillips Head Fasteners
PMf
1FOEBOU.PVOU
(stems by others; damp only)
TNft 5XJO5VCF/JHIU-JHIUo
5/7/9 watts (120V only)
UCft 6QMJHIU$PNQPOFOU
(Pendant Mount only;
stems by others; damp only)
VQ
F: 847-360-1781
Accessories
9500
Torx® Screwdriver
D-0552 Torx Driver Bit
(Required for CMB Option)
†
n/a on 2' T5/T5HO or 3' T5HO fixtures
with EL, PEL or TN options
n/a with 347V
W
2' Fixtures have minimum 350-450
lumen battery pack
Q
n/a on 2' fixtures
f OBXJUIMBNQT
t OBXJUI-&%-BNQ0QUJPOT
V
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2013 Kenall Mfg. Co. All rights reserved.
MLHA8-111113
For additional photometry, go to www.kenall.com
MILLENIUM STRETCH™
MLHA8 SERIES
DIMENSIONAL DATA
CROSS SECTION/DETAILS
MOUNTING HOLES
LED
D
(6) .12" Dia.
Mounting Holes
8.00"
C
4.00"
CORNER MOUNT BRACKET
(2) .89" Dia. K.O.'s
6.89"
5.60"
4.00"
5.60"
6.89"
1.50" Dia. Wire Thru K.O.
B
A
Lens Lockup Detail
CFL
8.00"
4.00"
Nominal Two Foot Fixture Legend
LMP End Cap A
B
C
T8
R
26.524
22.312
N/A
T8
F
25.308
22.312
N/A
T8
RV
28.632
22.312
N/A
T5
R
24.940
20.728
N/A
T5
F
23.724
20.728
N/A
T5
RV
27.048
20.728
N/A
D
21.000
21.000
21.000
20.875
20.875
20.875
www.kenall.com
Nominal Three Foot Fixture Legend
LMP End Cap A
B
C
T8
R
38.524
34.312
16.500
T8
F
34.312
34.312
16.500
T8
RV
40.632
34.312
16.500
T5
R
36.751
32.540
16.344
T5
F
35.535
32.540
16.344
T5
RV
38.859
32.540
16.344
P: 800-4-Kenall
F: 847-360-1781
D
33.000
33.000
33.000
32.688
32.688
32.688
Nominal Four Foot Fixture Legend
LMP End Cap A
B
C
T8/LED R
50.524
46.312
22.500
T8/LED F
49.308
46.312
22.500
T8/LED RV
52.632
46.312
22.500
T5
R
48.562
44.350
22.250
T5
F
47.346
44.350
22.250
T5
RV
50.670
44.350
22.250
D
45.000
45.000
45.000
44.500
44.500
44.500
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2013 Kenall Mfg. Co. All rights reserved.
MLHA8-111113
L-19
fo cus 3
™
features
High performance perimeter open wall
washing system.
Luminaire alignment is maintained with
continuous angle and splice brackets.
Focus™ 3 offers excellent vertical
illumination without shielding.
dimensional data
"Z"Bracket
3/4"
1/2" min - 7/8" max
Horizontal Adjustment
6.50"
165.1mm
8.19" ± 0.19"
208.0mm ± 5.0mm
1.86"
47.3mm
october 2011 D
"J" Bracket
7.75"
196.9mm
10.00"
254.0mm
lamping options
T8 LAMPS
T5/T5HO LAMPS
performance
1–Lamp T8
81% Efficiency
1437cd @ 15°
Visit focalpointlights.com for
complete photometric data.
www.focalpointlights.com | 1.773.247.9494
fixture:
project:
ordering
details
typical run layout
Overall Length
“xx”
90 Degree
Inside Corner
Left Sliding Sleeve
12" Max
Left
Sliding Sleeve
Intermediate
Sliding Sleeve
Overall
Length
“xx”
Intermediate
Sliding Sleeve
Focus 3
12" Max
Right
Sliding Sleeve
“xx”
NS
NS
lamping
One Lamp T8
Two Lamp T8
One Lamp T5
Two Lamp T5
One Lamp T5HO
Two Lamp T5HO
Fractional Dimensions up to 12" are taken up
by the use of a sliding sleeve.
Right
Sliding
Sleeve
1T8
2T8
1T5
2T5
1T5HO
2T5HO
circuit
Single Circuit
Dual Circuit
Luminaires must be installed prior to ceiling.
(Two lamps only)
Start run from corner with any standard luminaire.
Corner to corner runs end with an intermediate sleeve.
1C
2C
voltage
120 Volt
277 Volt
347 Volt
120
277
347
ballast
construction
20 Ga. steel housing.
20 Ga. steel T-rail mates with ceiling.
18 Ga. internal bulkheads join luminaires.
18 Ga. galvanized steel splice brackets are provided to ensure precise
luminaire alignment.
20 Ga. steel continuous wall angles are provided to ensure horizontal
alignment at wall.
Luminaires are available up to 8' nominal lengths.
36 lbs
49 lbs
Electronic Instant Start <20% THD
E
Electronic Program Start <10% THD
S
Electronic Dimming Ballast* D
Recessed
RC
factory options
Air Return
AR
Emergency Circuit* EC
Emergency Battery Pack* EM
Flanged End
FL
(specify when run does not
terminate at a wall)
HLR/GLR Fuse
FU
Matte White Reflector
WR
Include 3000K Lamp* L830
Include 3500K Lamp* L835
Include 4100K Lamp* L841
Sliding Sleeve
SS
optic
CNC roll-formed semi-specular .024" aluminum front reflector with specular
.024" aluminum back reflector.
electrical
Electronic ballasts are thermally protected and have a Class “P” rating.
Optional dimming ballasts available.
Consult factory for dimming specifications and availability.
UL and cUL listed.
WH
finish
Matte Satin White
WH
luminaire length
finish
Polyester powder coat applied over a 5-stage pre–treatment.
Standard luminaire housing finished in Matte Satin White.
RC
mounting
Designate length in feet
(Nominal lengths: 2',3',4',5',6',7',8')
(All end caps are flat with no flange unless
otherwise specified)
XX'
corner options
90-degree Inside Corner
90-degree Outside Corner
Outside
.5" min 1" max
FW3-IC90
FW3-OC90
Inside
11"
10"
11"
11"
10"
.5" min 1" max
Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | T: 773.247.9494 | F: 773.247.8484 | info@focalpointlights.com | www.focalpointlights.com.
Focal Point LLC reserves the right to change specifications for product improvement without notification.
specifications
4' unit weight:
8' unit weight:
FW3
shielding
No Shielding, Open Optic
“J” and “Z” angle brackets must be cut
to length in field.
Overall
Length
90 Degree
Outside Corner
12" Max
FW3
luminaire series
sliding sleeves
* for more information see Reference section.
perimeter
363
f ocus 3
TM
1440
1152
864
576
288
0
0°
45°
90°
20°
Efficiency: 81%
30°
Test #: 8761.0
LUMEN SUMMARY
Zone Lumens
%
Lamp
%
Fixt
0°
1029 1029 1029 1029 1029
0°-30°
858
30.1
37.3
5°
1106 1100 1089 1074 1020
94
0°-40°
1394
48.9
60.5
70°
15°
1437 1393 1244 1087 996
292
0°-60°
2149
75.4
93.3
25°
1334 1382 1399 1131 915
471
0°-90°
2303
80.8
100.0
35°
775
883
1101 1125 772
536
0°-180°
2303
81
100.0
45°
665
622
631
440
55°
344
417
497
584
420
315
65°
22
55
223
265
252
110
75°
7
85° 50°
10°
80°
60°
0°
Catalog #: FW3-1T8-1C-120-E-RC-HW
VerticalHorizontal Angle
Zonal
Angle 0°
22.5°
45°
67.5° 90° Lumens
90°
-20° -10°
Filename: FW3NS1T8.IES
CANDLEPOWER DISTRIBUTION
-30°
40°
90°
45°
0°
948
613
12
16
94
97
37
3
3
4
7
19
6
90°
0
0
0
0
0
95°
0
0
0
0
0
0
105°
0
0
0
0
0
0
115°
0
0
0
0
0
0
125°
0
0
0
0
0
0
135°
0
0
0
0
0
0
145°
0
0
0
0
0
0
155°
0
0
0
0
0
0
165°
0
0
0
0
0
0
175°
0
0
0
0
0
0
180°
0
0
0
0
0
Total
Luminaire
Go to www.focalpointlights.com for additional photometric data.
fo cus s t a n d a rd run length
Continuous Runs consist of standard fixture lengths. Left and Right End Trims and Sliding Sleeves are determinate,
according to specific field conditions. Consult factory for details.
Example: 32' run = three 8' fixtures and one 7' fixture with a sliding sleeve expandable to 32'.
run length
(in feet)
standard fixture
lengths required
lamp sizes
sliding
sleeve
run length
(in feet)
standard fixture
lengths required
lamp sizes
sliding
sleeve
4–5
4
4
1
34 – 35
88864
444444433
1
5–6
5
5
1
35 – 36
88883
444444443
1
6–7
6
33
1
36 – 37
88884
444444444
1
7–8
7
43
1
37 – 38
88867
4444444333
1
8–9
8
44
1
38 – 39
88886
4444444433
1
9 – 10
63
333
1
39 – 40
88887
4444444443
1
10 – 11
64
334
1
40 – 41
88888
4444444444
1
11 – 12
83
443
1
41 – 42
888863
44444444333
1
12 – 13
84
444
1
42 – 43
888864
44444444433
1
13 – 14
76
4333
1
43 – 44
888883
44444444443
1
14 – 15
86
4433
1
44 – 45
888884
44444444444
1
15 – 16
87
4443
1
45 – 46
888876
444444444333
1
16 – 17
88
4444
1
46 – 47
888886
444444444433
1
17 – 18
863
44333
1
47 – 48
888887
444444444443
1
18 – 19
864
44433
1
48 – 49
888888
444444444444
1
19 – 20
883
44443
1
49 – 50
8888863
4444444444333
1
20 – 21
884
44444
1
50 – 51
8888873
4444444444433
1
21 – 22
876
444333
1
51 –52
8888883
4444444444443
1
22 – 23
886
444433
1
23 – 24
887
444443
1
24 – 25
888
444444
1
25 – 26
8863
4444333
1
26 – 27
8864
4444433
1
27 – 28
8883
4444443
1
28 – 29
8884
4444444
1
29 – 30
8876
44444333
1
30 – 31
8886
44444433
1
31 – 32
8887
44444443
1
32 – 33
8888
44444444
1
33 – 34
88863
444444333
1
reference
363
6"
(152mm)
3-1/4"
(83mm)
J
L
M
72" (1830mm)
96" (2440mm)
2 x 4'
Outlet box access
opening (electrical feed)
8/13
Standard:
UL listed or CSA certified for damp locations.
For complete ballast specifications, see Accessories Section.
Optional integral emergency battery operates one lamp.
Separate unswitched supply is required.
Optional electronic dimming ballast; compatible dimmer
switch required (by others). Consult sales representative for
compatibility and specifications.
Integral electronic HPF thermally protected class P ballast with
end-of-life protection.
U.S. Patent 7,213,949 B2; U.K. Patent 2,415,773.
Reflector aiming is adjustable – locks with set screws.
Hangers include aluminum mounting plate, cover plate and
1-1/2" dia. x 1-1/2" aluminum hub with 7/8" O.D. steel arm/
stem. 1/4-20 mounting fasteners by others. Suitable backing
structure required – allow 3 lbs/ft (21.6kg/m) (8' unit = 24 lbs).
Mounting:
Surface, pendant or cantilever hangers ordered separately;
specify end kit or intermediate hangers.
Snap-on lens – composite of impact resistant and UV
stabilized acrylic for easy maintenance.
Reflector – extruded high purity aluminum with clear anodized
specular finish. All luminaire hardware – stainless steel.
Electrical feed hanger mounts over recessed outlet box (by
others). Locate electrical feed at end of row. Internal wireway
allows supply wiring to be fed through mounting hub to
adjacent units.
M Recessed outlet box
(by others)
L
K Aluminum cover plate
(conceals fasteners
and outlet box)
60-5/8" (1540mm)
2 x 3'
48-3/4" (1240mm)
1 x 5'
37" (940mm)
1 x 4'
25-1/4" (640 mm)
Length
(center to
center of hubs)
1 x 3'
1 x 2'
Lamp
Length
4"
(101mm)
Pendant
length
(6" min.)
Painted surfaces – 6 stage pretreatment and electrostatically
applied thermoset polyester powder coating for stable, long
lasting and corrosion resistant finish.
Die-cast aluminum
mounting plate (1/4-20
fasteners by others)
C
A
F
H
Pendant Hanger
Electrical:
Use 90C° wire for supply connections and through wire.
J
H Tubular steel stem or arm
G Surface, cantilever,
or pendant hangers
(ordered separately)
4-3/4"
(121mm)
Mounting Plate
1-1/2"
(38mm)
T5 Fluorescent
Finish:
Semigloss white housing and end plates.
C Die-cast aluminum
end plates
UV and impact resistant
acrylic snap-on lens
with silicone gasket
B Aluminum hub with
locking set screws
F
D Integral electronic ballast/
internal wireway
4-1/2"
(114mm)
K
C
Length (see chart)
A Specular extruded
aluminum reflector
G
B
H
(Lighting upward)
12", 18" or 24"
(305, 460 or 610mm)
Specifications
6"
(152mm)
5/8"
(16mm)
B
C
D
A
G
4-1/2"
(114mm)
Medium smooth, integral
1:8 Scale
Cantilever Hanger
2-1/4"
(57mm)
4-3/4"
(120mm)
6"
(152mm)
Surface Hanger
Lighting the Wall
Cradle to Cradle CertifiedCM
is a certification mark licensed
by the Cradle to Cradle Products
Innovation Institute.
2x54W
For complete
T5
photometrics, visit
thelightingquotient.com
Adjustable –
maximum Cd
shown, aimed
25° above
nadir.
3000 Cd
1x54W
T5
Two parabolic reflector sections drive light to the bottom of the
wall. An elliptical section shields the lamp from normal viewing
angles and redirects its light to a parabola. Glare is minimized
and asymmetry of the beam is maximized resulting in high
beam efficiency and superior surface uniformity.
Performance
Q Internal wireway – integral electronic ballast; through wiring
Q Versatile – surface, cantilever or pendant mount
ideal for food service and healthcare settings
Q Snap-on clear acrylic lens for safety, easy maintanence –
wall lighting from minimal setbacks; optional dual lamp
Q Reflector optimized for T5 – precise optical control for
Features
Style 124
W
15.0
L-21
W
15.1
5
6
7
8
H = For use with accessory surface, pendant or cantilever
hub mounting hangers.
1 x F14T5
2 x F14T5
1 x F21T5
2 x F21T5
1 x F28T5
2 x F28T5
1 x F35T5
2 x F35T5
2 x F21T5
4 x F21T5
2 x F28T5
4 x F28T5
T114
D214
T121
D221
T128
D228
T135
D235
T221
D421
T228
D428
T5
Lamp(s)
D455
T255
D439
T239
T180
D255
T155
D239
T139
D224
T124
Code
4 x F54T5/HO
2 x F54T5/HO
4 x F39T5/HO
2 x F39T5/HO
1 x F80T5/HO
2 x F54T5/HO
1 x F54T5/HO
2 x F39T5/HO
1 x F39T5/HO
2 x F24T5/HO
1 x F24T5/HO
T5HO
Lamp(s)
8/13
For complete lamp and ballast information, see Accessories Section.
Standard T5 lamp color is 3000K/80+ CRI.
8' (2.4m)
6' (1.8m)
5' (1.5m)
4' (1.2m)
3' (0.9m)
2' (0.6m)
Code
T5 Fluorescent
Length
(nominal)
Example: T255 = Nominal 8' (2.4m) housing with
(2) 54W T5HO lamps (in length)
D2 = Dual-lamp cross section, 1-lamp in length
D4 = Dual-lamp cross section, 2-lamp in length
T1 = Single-lamp cross section, 1-lamp in length
T2 = Single-lamp cross section, 2-lamp in length
Lamp Configuration
Lamp Wattage (see chart below)
= T5 Fluorescent Lamp Code
Q
Q
elliptipar from The Lighting Quotient
114 Boston Post Road, West Haven, Connecticut 06516, USA
Voice 203.931.4455 Fax 203.931.4464 thelightingquotient.com
Order end kit and intermediate mounting hangers separately.
Medium smooth surface fluorescent for use with two 54W T5HO
lamps in nominal 8 foot reflector. For use with accessory hub
hangers. Semigloss white powder coat finish. Integral 2-lamp
120V electronic ballast. UL listed or CSA certified for U.S.
F124 - T255 - H - 02 - 1 - 000
Example
0 = UL listed or CSA certified for U.S.
J = UL listed or CSA certified for Canada
8 Destination Requirement
0P = Natatorium (pool) use
XX = For modification not listed, include detailed description.
Consult factory prior to specification.
Note: Requires unswitched feed to battery (by others).
00 = No options
0E = Integral emergency battery pack with indicator lamp
and test button. Not available for Dual-lamp T5/HO.
Not available in 2' and 3' length units. Operates one lamp.
7 Option
* Consult sales representative for availability of 347V.
+ Consult sales representative for dimming 5' lamps (lamp codes T135,
D235, T180, D280). Availability for wattages and voltages varies with
ballast manufacturer and control type – see thelightingquotient.com
for additional dimming specifications and limitations.
Dimming +
T = 120V
V = 277V
6 Voltage/Ballast
3 Lamp
Electronic
1 = 120V
2 = 277V
3 = 347V (Canada)*
124 = Medium smooth surface, integral ballast
2 Style
02 = Semigloss white
99 = Custom RAL or computer matched color to be specified,
consult sales representative
5 Finish
4
F = Linear fluorescent
3
Note: Order hangers separately. Specify end kit or intermediate hanger.
2
1 Source
1
4 Mounting
-
F 1 2 4 -
-H -
Project:
To form a Catalog Number
To Order
(order separately)
0 = U.S.
J = Canada
= Ballast fuse kit
Certain products illustrated may be covered by applicable patents and patents pending. These specifications supersede all prior publications and are subject to change
without notice. Copyright © 2013 Sylvan R. Shemitz Designs, Inc., all rights reserved.
The external shapes of the housings are trademarks of Sylvan R. Shemitz Designs, Inc.
dba The Lighting Quotient, makers of elliptipar, tambient and fraqtir.
AFK000X
Order separately. See Accessories Section for specifications.
Accessories
HDA Surface hanger with mounting/splice box options
(intermediate)
HDB Surface hanger with mounting/splice box options
(end kit/pair)
HDC Cantilever hanger with mounting/splice box options
(intermediate)
HDD Cantilever hanger with mounting/splice box options
(end kit/pair)
HDF Pendant hanger with mounting/splice box options
(intermediate)
HDG Pendant hanger with mounting/splice box options
(end kit/pair)
Order one hanger end kit for each individually mounted
luminaire or each row. For a continuous row, order one
intermediate hanger for each additional luminaire in the row.
Example: three rows of four reflectors requires 3 end kits
and 9 intermediate hangers. Note: End kit includes one
electrical feed hanger.
(order separately)
000 = Intermediate
mounting hub
5 Finish
000 = End kit
(includes 2
5 Finish mounting hubs)
Hubs with Hangers
HOC
HOD
For use with 1/2" rigid conduit or fittings (supplied by others).
Order one hub end kit for each individually mounted luminaire
or each row. For a continuous row, order one intermediate
hub for each additional luminaire in the row. Example: a row of
five reflectors requires 1 hub end kit and 4 intermediate hubs.
Note: Locate electrical feed at end of row.
Hubs Only
Type:
Style 124
L-22
DRIVERLESS LED Strip Light
LED Strip Light- 165ft. Continuous SMD 5050
120V LED Strip
DESCRIPTION
Solid Apollo’s Driverless, Dimmable LED Light Strips are like nothing
else available on the market, it is a revolution in Driverless LED Lighting
technology! Until now, installing low voltage LED Strip Lights required
the use of transformers or drivers. If the project design called for a large
number of LED strips, complex wiring and the use of many drivers was
needed to secure a long lasting installation. Now, you only need to plug
one end of the strip into a wall outlet and instantly have the ability to
light up 165(ft) of continuous LED strip with just one connection, no drivers, transformers or complex wiring necessary. Driverless A/C LED Strip
runs off of any wall A/C outlet, an advantage because the LED Strip can
operate virtually anywhere. Now, anyone can add accent lighting virtually anywhere at a low cost and with no professional assistance!
Available Colors
Warm White
Daylight White
Pure White
Red
Green
Blue
Amber
Comes Plug-in Ready!
RELATEDD PRODUCTS
PRODUC
ADVANTAGES
+ Up To 165Ft of Continuous Strip With Just One Connection
+ Dimmable With Almost Any Wall Dimmer In The Market
+ Indoor/Outdoor Applications
+ Plug And Play No Drivers Or Cumbersome Transformers Needed
+ Installs In Seconds
+ No Wires To Cut And Solder
)JHI(SBEF4JMJDPOF)PVTJOH'PS"EEFE1SPUFDUJPO
$BOCF$VU&WFSZ-&%TPSJO
DN
Essential Product Features
Typical Applications
t0QFSBUJOH7PMUBHF7"$
tWhite Printed Circuit Board (PCB)
t:FBS8BSSBOUZ
t%JNFOTJPOT7BSJBCMF
t8BUUT1FS'PPU8
t#FBN"OHMF
t*13BUJOH*1
t-JHIUJOH&YUFOEFE%JTUBODFT
t,JUDIFO#BUISPPN-BVOESZ6UJMJUZ
t0VUEPPS"SDIJUFDUVSBM)PTQJUBMJUZ-JHIUJOH
t-BOETDBQF-JHIUJOH
t%FDLT1BUIT(BSEFOT
t%SJWFXBZ
t$PWFMJHIUJOHGPSEJGGJDVMUBDDFTT
AC Strip Interconnector re-
Waterproof
of Strip
St
S Joiner
connect a cut section of AC Strip, go
around corners: SKU# SA-DLS-inter
join two pieces of driverless strip
together when severed at cut
point: SKU# SA-DLS-JOINER
AC Strip Power Cord plug AC
Strip directly into any wall outlet:
SKU# SA-DLS-POWER
Waterproof Strip Bracket
attach any strip section to mounting surface: SKU# SA-DLS-Brakcet
Waterproof End Cap waterproof the end of a strip that has been
severed at a cut point: SKU# SA-DLSENDCAP
TECHNICAL INFORMATION
LED COLOR
SKU#
TEMP (K)
LED / Ft.
LUMENS / Ft
WATTS / Ft.
LED TYPE
WARM WHITE
SA-DLS-5050-WW
DAYLIGHT WHITE
SA-DLS-5050-DW
,
18
220lm
4.4W
SMD 5050
80
JO
,
18
274lm
4.4W
SMD 5050
82
JO
PURE WHITE
RED
SA-DLS-5050-W
,
18
274lm
4.4W
SMD 5050
82
JO
SA-DLS-5050-RED
N/A
18
MN
4.4W
SMD 5050
N/A
JO
(CRI)
Color Rendering Index
MINIMUM CUT
BLUE
SA-DLS-5050-BLUE
N/A
18
78lm
4.4W
SMD 5050
N/A
JO
GREEN
SA-DLS-5050-GREEN
N/A
18
68lm
4.4W
SMD 5050
N/A
JO
AMBER
SA-DLS-5050-AMBER
N/A
18
60lm
4.4W
SMD 5050
N/A
JO
page 9
Winline Surface Linear 308 Dry
L-23
Winline Surface Linear - WSL
WSL
series
308 Dry
model 308 dry - 308
model
Series:
WSL - Winline Surface Linear
Model:
Model 308 Dry
Total Run Length in Feet
offered in 6" increments starting at 12"
ex. 24 FT= 24 foot run
or
Preconfigured Run Length Code
see page 5
or
To Be Determined
TBD when run length unknown
Run Length Total Run Length in Feet
Code:
308 Offered in 6" Increments Starting at 12"
Ex. 24 FT= 24 Foot Run
15° 30° 60° 100° -
15
30
60
100
beam spread
ANSI-binned 2700K ANSI-binned 3000K ANSI-binned 3500K ANSI-binned 4000K -
27K
30K
35K
40K
LED code
Preconfigured Run Length Code
See Submittal at www.winonalighting.com
To Be Determined
TBD When Run Length Unknown
Beam
Spread:
LED Code:
Voltage:
15 30 60 100 -
27K 30K 35K 40K -
15°
30°
100°
100°
300 Series
Color Temperature
ANSI-2700K White
ANSI-3000K White
ANSI-3500K White
ANSI-4000K White
non-dimming 24 volt AC - ND24V
dimming 24 volt AC - DM24V
Model 308
lm/ft
W/ft
750
16.0
766
16.0
895
16.0
926
16.0
ND24V - Non-Dimming 24 Volt AC
DM24V - Dimming 24 Volt AC
Mount:
FA-
Fixed
Adjustable
Finish:
NAA SGB SGW CPF -
Natural Type III Anodized Aluminum
Semi-Gloss Black Paint
Semi-Gloss White Paint
Custom Paint Finish
SE *RB -
Surface End Feed
Recessed Bottom Feed
Power
Feed:
run length
code
voltage
fixed - F
adjustable - A
mount
natural (type III) anodized aluminum semi gloss black paint semi gloss white paint custom paint finish -
surface end feed recessed bottom feed -
NAA
SGB
SGW
CPF
SE
RB*
*available on F (fixed mount) only
none - X
*available on F (fixed mount) only
finish
power feed
X
options
Options:
X-
None
Special:
STD MOD -
Standard
Modified
Power and Dimming
The Winline 300 Series operates on 24VAC and can be dimmed with commonly
available low voltage magnetic dimming equipment. A wide range of remote
transformers are available in 120V and 277V primary (see pages 65-66).
Mounting and Adjusting
Both fixed and adjustable mounts combined with an integral wire tray allow
for ease of installation and organized wiring. The low profile fixed mount is
1/8" high and the adjustable mount allows for a 300 degree rotation around
the centerline of the fixture.
Operating Temperature -22°F to 122°F (-30°C to 50°C)
Color and Light Output
The 300 Series utilize Nichia 757 white LEDs in four standard color temperatures.
standard - STD
modified - MOD
special
Describe Modification:
Winline Surface Linear 308 Dry
fixed mount
Nominal
Length
12.44"
18.34"
24.25"
30.16"
36.06"
41.97"
47.88"
12"
18"
24"
30"
36"
42"
48"
1.88"
47.75mm
15°
Installed
Length
3443
2582
Maximum Candela = 3443
Located At Horizontal Angle = 90, Vertical Angle = 2.5
#1 - Vertical Plane Through Horizontal Angles (0-180)
#2 - Vertical Plane Through Horizontal Angles (90-270)
1721
315.98mm
465.84mm
615.95mm
766.06mm
915.92mm
1066.04mm
1216.15mm
860
2
Luminaires can
be mounted as
close as .125"
min.(3.18mm)
1
IES Test Report: LTL21981 Catalog Number: WSL-308-48-15-30K
Description: Nichia 757 LEDs / 48" Winline 308 Dry Luminaire /
Extruded Aluminum Housing / Acrylic Lens
LM79 Data - Based on WSL308/15°/30K Test Results
surface end feed
(only one required
per run)
Color Temperature
Recessed Bottom Feed (RB)Only one required per run
Use standard switch box (by others)
end view 1
end view 2
1.81"
45.97mm
15° fixed mount
ANSI-binned 2700K
ANSI-binned 3000K
ANSI-binned 3500K
ANSI-binned 4000K
30°
30° fixed mount
60° fixed mount
Multiplier
Total
Lumens
Lamp
Watts
Lumens
per Watt
CRI
Power
Factor
0.97
1.00
1.16
1.21
3003
3065
3585
3708
63.9
63.9
63.9
63.9
46.9
47.9
56.1
58.0
82.8
82.7
83.6
85.6
.89
.89
.89
.89
2997
2247
100° fixed mount
Maximum Candela = 2997
Located At Horizontal Angle = 45, Vertical Angle = 2.5
#1 - Vertical Plane Through Horizontal Angles (0-180)
#2 - Vertical Plane Through Horizontal Angles (90-270)
1498
1.93"
49.02mm
1.98"
50.29mm
adjustable
mount
1.88"
47.75mm
1.96"
49.78mm
749
1.85"
46.99mm
1.94"
49.28mm
2
1
1.75"
44.45mm
Nominal
Length
12"
18"
24"
30"
36"
42"
48"
Installed
Length
13.13"
19.04"
24.95"
30.86"
36.82"
42.67"
48.57"
IES Test Report: LTL21982 Catalog Number: WSL-308-48-30-30K
Description: Nichia 757 LEDs / 48" Winline 308 Dry Luminaire /
Extruded Aluminum Housing / Acrylic Lens
333.50mm
483.62mm
633.73mm
783.59mm
935.23mm
1083.82mm
1233.68mm
LM79 Data - Based on WSL308/30°/30K Test Results
Luminaires can
be mounted as
close as .125"
min.(3.18mm)
Color Temperature
ANSI-binned 2700K
ANSI-binned 3000K
ANSI-binned 3500K
ANSI-binned 4000K
60°
Multiplier
Total
Lumens
Lamp
Watts
Lumens
per Watt
CRI
Power
Factor
0.97
1.00
1.16
1.21
3026
3087
3612
3735
64.2
64.2
64.2
64.2
47.1
48.7
56.2
58.4
82.8
82.7
85.6
85.6
.89
.89
.89
.89
2102
1576
surface end feed
(only one required
per run)
end view 1
2.31"
58.67mm
2.10"
53.34mm
Maximum Candela = 2102
Located At Horizontal Angle = 90, Vertical Angle = 10
#1 - Vertical Plane Through Horizontal Angles (0-180)
#2 - Vertical Plane Through Horizontal Angles (90-270)
1051
525
end view 2
2
15° adjustable mount
2.35"
59.69mm
30° adjustable mount
60° adjustable mount
2.34"
59.44mm
1
100° adjustable mount
2.32"
58.93mm
2.21"
56.13mm
2.00"
50.80mm
IES Test Report: LTL21983 Catalog Number: WSL-304-48-60-30K
Description: Nichia 757 LEDs / 48" Winline 308 Dry Luminaire /
Extruded Aluminum Housing / Acrylic Lens
LM79 Data - Based on WSL308/60°/30K Test Results
Color Temperature
Fixture aimed 100°
beyond vertical
Peak Candela
Fixture aimed 100°
beyond vertical
Peak Candela
End View
Fixture rotated to the right
End View
Fixture rotated to the left
ANSI-binned 2700K
ANSI-binned 3000K
ANSI-binned 3500K
ANSI-binned 4000K
100°
Multiplier
Total
Lumens
Lamp
Watts
Lumens
per Watt
CRI
Power
Factor
0.97
1.00
1.16
1.21
3255
3222
3887
4019
64.1
64.1
64.1
64.1
50.7
52.3
60.5
62.6
82.8
82.7
83.6
85.6
.89
.89
.89
.89
1304
Maximum Candela = 1304
Located At Horizontal Angle = 90, Vertical Angle = 5
#1 - Vertical Plane Through Horizontal Angles (0-180)
#2 - Vertical Plane Through Horizontal Angles (90-270)
978
652
326
2
1
IES Test Report: LTL21984 Catalog Number: WSL-308-48-100-30K
Description: Nichia 757 LEDs / 48" Winline 308 Dry Luminaire /
Extruded Aluminum Housing / Acrylic Lens
LM79 Data - Based on WSL308/100°/30K Test Results
Color Temperature
ANSI-binned 2700K
ANSI-binned 3000K
ANSI-binned 3500K
ANSI-binned 4000K
Winline Surface Linear 308 is ETL listed for
dry location and complies with UL Standard 2108.
IP66
3190865
Multiplier
Total
Lumens
Lamp
Watts
Lumens
per Watt
CRI
Power
Factor
0.97
1.00
1.16
1.21
3186
3252
3805
3935
63.8
63.8
63.8
63.8
49.9
50.9
59.6
61.6
82.8
82.7
83.6
85.6
.89
.89
.89
.89
P-2
LIGHTPLANE UP AND UNDER
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE LINEAR - Up & Under
Page 1 of 3
TYPE:
1. Style:
LPLUU-S - Lightplane Up and Under Suspended (LPLUU-S)
LPLUU-W - Lightplane Up and Under Wall (LPLUU-W)
2. Overall Run Length:
Individual (2’,3’,4’,5’,6’,7’,8’)
Continuous (Enter total run length, i.e 20’)
3. Indirect Lamping Option:
N/A - Open channel for downlighting only (N/A)
IFSO - Fluorescent - Standard Output (IFSO)
IFHO - Fluorescent - High Output (IFHO)
IHP7- 80 LPW High Performance LED White 3500° 7W/LF (IHP7)
IHP14- 80 LPW High Performance LED White 3500° 14W/LF (HP14)
IRGB - LED Color Changing (RGB)-Consult Factory for Control Interface
Options (IRGB)
IT8 - Fluorescent T8 (IT8)
ILXHO - Seamlessline lamp (ILXHO Feelux High Output)*
ILXHE - Seamlessline lamp (LXHE Feelux High Efficiency)*
*See Option 1A
4. Indirect Lamp Configuration:
R - Regular (R)
S - Staggered (S)
5. Indirect Lens Option:
WD - Satine Lens (WD)
*EXT - Extra Diffuse, Opal Lens (EXT)
RO - Open top, Reflector Only (RO)
DG - Flush guard lens - Indirect only (DG)
*The EXT Option is best for minimal lamp image.
3
5 8"
3
4 4"
1
2 4"
EXT - EXT
RO-EXT
6. Indirect Ballast Specification:
ILED - LED Power Supply, non-dim (ILED)
ILED-DIM - LED Power Supply with 0-10V dimming (ILED-DIM)
ISTD - Standard Electronic, non-dim <10%THD (ISTD)
IRGBSEQ - RGB with integral sequencer, no control (IRGBSEQ)
IRGBDIM - RGB with 0-10V Dimming Control Wires (controllers not included) (IRGBDIM)
IRGBDMX- RGB with DMX Interface module (DMX controller not included (IRGBDMX)
* IMK7 - Advance Mark 7® Dimming 0-10V (IMK7)
* IMK10 - Advance Mark 10® Dimming (IMK10)
* IHILUME3D - Lutron Hilume 3-D® (IHILUME3D)
** IHILUME-A - Lutron Hilume A Series LED® (IHILUME-A)
* IHSeries- Lutron H-SERIES® Dimming (IHSERIES)
* IECOSYS- Lutron ECOSYSTEM® Dimming (IECOSYS)
Design Specifications
* IBALSTAR - Ballastar® Light level switching (IBALSTAR)
* IUSD - Superdim® Dimming (IUSD)
Construction
* IQUICK - Osram Quicktronic® Dimming (IQUICK)
Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable.
*Please consult ballast manufacturer for lamp/ballast compatability.
Reflectors are formed from .040 aluminum and finished in Titanium
** OPTION FOR LINEAR LED ONLY
7. Direct Lamping Option:
N/A - Open channel for downlighting only (N/A)
DFSO - Fluorescent - Standard Output (DFSO)
DFHO - Fluorescent - High Output (DFHO)
**DHP7- 80 LPW High Performance LED White 3500° 7W/LF (DHP7)
DHP14- 80 LPW High Performance LED White 3500° 14W/LF (DHP14)
DMR16 - 50 W MR16 Halogen (DMR16)
DLED MR16 - 6W LED MR16 GU5.3 Base (DLEDMR16)
DRGB - LED Color Changing (DRGB)-Consult Factory for Control Interface Options
DT8 - Fluorescent T8 (DT8)
DXHO - Seamlessline lamp (DLXHO Feelux High Output)*
DLXHE - Seamlessline lamp (DLXHE Feelux High Efficiency)*
*See Option 1A
Continued on Next Page...
8FT suspension hardware included
Canopy to cover 4-O Junction Box
white powdercoat.
Lenses are made from twin layered extruded high-impact acrylic.
WD is a full frosted/transparent combination.
EXT is a half frosted/white combination.
Single piece construction aluminum louver with clear matte anodized finish.
Electrical Details
All ballasts are electronic <10% THD
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to channel (unless otherwise noted).
LED options available (consult factory)
Multiple interface options availiable including dimming, motion sensing, daylight harvesting and DALI.
ETL Listed
Non-lensed units rated for Indoor location only.
Lensed units rated for damp location.
Emergency
Fixtures can be wired for emergency circuit or emergency battery
backup.
Emergency one-lamp ballasts provide 90 minutes of illumination.
T5/T5HO = Initial output of 1300 Lumens
Finish
All fixtures are standard in Ultimatte aluminum finish (AL) - A deep
etch and two-step clear anodizing process that gives a smooth,
clean and durable surface.
Powder Coat options are available. Consult factory.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE LINEAR - Up and Under
Page 2 of 3
TYPE:
8. Direct Lamp Configuration:
R - Regular (R)
S - Staggered (S)
9. Direct Lens Option:
WD - Satine Lens (WD)
*EXT - Extra Diffuse, Opal Lens (EXT)
*The EXT Option is best for minimal lamp image.
10. Direct Ballast Specification:
DLED - LED Power Supply, non-dim (DLED)
DLED-DIM - LED Power Supply with 0-10V dimming (DLED-DIM)
DSTD - Standard Electronic, non-dim <10%THD (DSTD)
DRGBSEQ - RGB with integral sequencer, no control (DRGBSEQ)
DRGBDIM - RGB with 0-10V Dimming Control Wires (controllers not included) (DRGBDIM)
DRGBDMX- RGB with DMX Interface module (DMX controller not included (DRGBDMX)
* DMK7 - Advance Mark 7® Dimming 0-10V (DMK7)
* DMK10 - Advance Mark 10® Dimming (DMK10)
* DHILUME3D - Lutron Hilume 3-D® (DHILUME3D)
** DHILUME-A - Lutron Hilume A Series LED® (DHILUME-A)
* DHSeries- Lutron H-SERIES® Dimming (DHSERIES)
* DECOSYS- Lutron ECOSYSTEM® Dimming (DECOSYS)
* DBALSTAR - Ballastar® Light level switching (DBALSTAR)
* DUSD - Superdim® Dimming (DUSD)
Lamp Configuration Chart: Individual and Continuous
* DQUICK - Osram Quicktronic® Dimming (DQUICK)
*Please consult ballast manufacturer for lamp/ballast compatability.
Regular
2’ 3’
4’
5’
6’
7’
8’
9’ 10’ 11’ 12’
** OPTION FOR LINEAR LED ONLY
14 or 24w T5
1
1
21 or 39w T5
11. Voltage:
1
28 or 54w T5
120 (120V)
277 (277V)
UNV (120/277 V)
347 (347V non-dim only))
2
1
35 or 80w T5
Staggered
2’
3’
21 or 39w T5
* AL (Natural “Ultimatte” aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your choice)
3
1
2
7’
8’
1
2
2
3
9’
10’
11’
12’
2
1
1
2
1
4’
14 or 24w T5
12.. Finish:
1
28 or 54w T5
5’
6’
.
.
.
1
1
3
2
3
3
1
35 or 80w T5
* AL is standard on all LPL product
Design Specifications
Construction
Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable.
Reflectors are formed from .040 aluminum and finished in Titanium
white powdercoat.
Lenses are made from twin layered extruded high-impact acrylic.
WD is a full frosted/transparent combination.
EXT is a half frosted/white combination.
Single piece construction aluminum louver with clear matte anodized finish.
Electrical Details
All ballasts are electronic <10% THD
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to channel (unless otherwise noted).
LED options available (consult factory)
Multiple interface options availiable including dimming, motion sensing, daylight harvesting and DALI.
ETL Listed
Non-lensed units rated for Indoor location only.
Lensed units rated for damp location.
Emergency
Fixtures can be wired for emergency circuit or emergency battery
backup.
Emergency one-lamp ballasts provide 90 minutes of illumination.
T5/T5HO = Initial output of 1300 Lumens
Finish
All fixtures are standard in Ultimatte aluminum finish (AL) - A deep
etch and two-step clear anodizing process that gives a smooth,
clean and durable surface.
Powder Coat options are available. Consult factory.
*1A - Option: Seamlessline Lamp (LX) End to End Lamp Mounting
*Channel dimensions identical to standard T5 lamping. Luminous
ends eliminate the need for staggered lamping. Consult factory
for additional details.
180
150
120
Spacing Criterion
1.2
1.3
Efficiency
74.9 %
90
300
60
600
0
ACROSS
45
ALONG
Catalog # LPLUU-4-FSO-RO-WD
30
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE LINEAR - Up and Under
Page 3 of 3
TYPE:
Standard: Pendant Wire Mounting with adjustable aircraft cable suspension
*4-1/2” dia. canopy
to cover 4-O Octagon Junction box Bullet Aircraft cable
suspension.
*Adjustable GripLock cable suspension
Option: Seismic Bracing
Option: Mitered Angles
Aircraft cable can
mount on side of
channel to seismic
anchoring.
Consult Factory for
angle options.
*8FT suspension hardware is standard on all
ALW suspended fixtures
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that gives
and durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
Rev: 2013/04/22
315
XPS
Buttler
But
lerr M
Ma
Magne
agn
ggne
net Scho
Sccho
hhoool
o
Georgi
Geo
Georgiana
eo
e rgi
rgi
g ana,
anna
ana
na, AAlab
labam
lab
abbam
ama
maa
Arrcchit
Arc
Ar
Archit
hhiiittect
tect
ectct: Goo
ec
GGo
Goodwy
oodw
oo
dw
dwyn
dwy
wy
wyn
yn Milliilllllss and
nd Caw
Caw
wood
odd Ar
Architec
Archi
cchi
ch
hhitite
hi
teecctur
tec
tur
ural,
all, Montgome
al
Monnt
Mo
ntg
ttggome
ome
om
mery,
ryyy,, Alaba
AAllab
aba
bbaama
bama
ma
LLiig
Ligh
Lig
ighti
httiing
hting
ht
ng Des
Deessign
De
iggn
gner:
er:r Bord
er
oorrden
rrdden
en and
annd
nd Mo
M
Morri
orrrri
rrriis CCons
rris
oonnsulting
ons
ulting
ult
ng Engin
ng
Enggin
En
giineers,
eerrss,, Montgomery,
ee
eer
Mon
M
Mo
onntgo
ttgggoom
mer
me
eerry,y Ala
laabam
bam
ama
Pho
Ph
Pho
hoto
to by:
by: Edwa
by
dw
ward
ward
wa
rd Bad
BBaaddham
haam
ha
m Ph
Photo
Photo
oto
ot
togra
gra
gr
graphy
raphy
phy
hy
Features
ƒ Custom color or material
ƒ Increase or decrease housing width or length
ƒ Increase or decrease housing radius
ƒ Custom cutouts or logos in bottom detail
ƒ Alternate source configurations
ƒ Fused circuit protection
800-788-VISA
www.visalighting.com
NEW
LED
ƒ 5 year product warranty
ƒ Configurable segments available to create unique shapes for general illumination
and architectural expression. See pages 318-319 for component segments
ƒ Extruded aluminum side panels with architectural reveal and fabricated bottom housing
ƒ FP Optics™ — Maximize fluorescent efficiency with high performance
computer optimized reflector system using Miro Silver and Miro 9 finish
ƒ Optional clear prismatic lens for ease of maintenance and preservation of optical integrity
ƒ Less than 5% direct light for luminous glow with cutout patterns
on bottom backed by white acrylic for visual interest
ƒ Patented Power Art Cable™ mounting system uses a braided stainless
steel jacket to encapsulate power conductors and provide support.
Rated for loads up to 150 lbs (ETL listed to UL standards)
ƒ Adjustable accent light with standard softening lens for halogen source
ƒ Integral 12V dimmable electronic transformer for halogen source
ƒ Oven cured no VOC acrylic powder coat
ƒ Easy tool-less relamping
ƒ Fluorescent uplight
ƒ High power factor electronic ballast for fluorescent and HID
ƒ Mounts to standard electrical junction box (by others) with provided hardware. For T-bar
installation, Caddy 512HD or equivalent (by others) is required at each mounting location
ƒ ETL listed to UL standards (US and Canada) for indoor damp locations.
Not recommended for exterior applications
Suggested Variations
ADA
PENDANT
INDOOR
P-3
C Omnience
O
M
P
A
N
I
O
N
S Ceiling
Cypress-Cascade
Page 204
Outdoor
Page 434
Rev: 2012/07/19
314
TM
INFINITY PERFORMANCE
ABCD
ABC
CD - After
After Breas
Breastst Canc
ancer
ncer
nc
err Diagno
Diia
Dia
iagno
gnn sis
gnosis
sisis
Glenda
Gle
Glenda
nnddale,
alelle, Wisconsin
W sconsinn
Wi
Phoooto
Pho
too by:
by Ro
by
R ber
Rober
bbert
be
e t Ness
Ness
es , Satu
atu
turnn Lou
Lounge
Lo
ngge
nge
ge
Bottom Detail
(cutouts backed by white acrylic)
Confetti
(CNF)
Solid
(SLD)
Slots
(SLT)
Windows
(WIN)
800-788-VISA
www.visalighting.com
Rev: 2012/07/19
ADA
PENDANT
INDOOR
317
L = Length
R = Outside Radius
OAH = Overall Height
W = Width
Arc
D = Outside Diameter
Circle
OAH
OAH
D
Housing Profile
Straight
3-1/2”
(89 mm)
L
8” (203 mm)
4’ Arc
Specify Voltage or MVOLT
MVOLT fixture accepts 120 through 277 input voltage
FS14
FS24
FS28
FS54
14w T-5, mini bi-pin base, FLR
24w T-5/HO, mini bi-pin base, FLR
28w T-5, mini bi-pin base, FLR
54w T-5/HO, mini bi-pin base, FLR
800-788-VISA
www.visalighting.com
(MVOLT)
(MVOLT; 347V)
(MVOLT)
(MVOLT; 347V)
4’ Straight
Bottom Detail (see page 314)
CNF
Confetti
Solid
SLD
Slots
SLT
Windows
WIN
Options
CPM
DIM(A)
DIM(EB)
DIM(L)
IEM
MLS2
TL
IES File Number
CP5002-6FS24
CP5004-6FS24-SLD
CP5006-8FS24-SLD
CP5010-2FS24
CP5010-2FS24-SLD
CP5012-2FS39
CP5012-2FS39-SLD
CP5014-2FS54
CP5014-2FS54-SLD
CP5014-4FS24
CP5014-4FS24-SLD
LER
54
55
55
49
55
59
66
57
62
49
55
LTL 13932
Canopy painted to match
Advance Mark 10 fluorescent dimming, specify 120V or 277V,
FS24 and FS54 only
Lutron H3D EcoSystem digital link fluorescent dimming
Lutron H3D 3-wire fluorescent dimming
Integral emergency battery pack, specify 120V or 277V
Bi-level switching, FS14 and FS28 only
Top Lens
™
Door Height = 7'
Ceiling Height = 10'
Silhouette Height = 6'
LED
Complete BIM, Google Sketchup, and
Photometric files for these models can be
downloaded from www.visalighting.com
Finishes (see inside back cover)
(Painted)
Color Code Required - see color chart
L
OAH
Photometrics & 3D Modeling
Abbreviation Key
Source (Voltage)
Source: Two 54 Watt High Output T5 Linear Fluorescent Lamps
Rated At 4400 Lumens Each
180˚
150˚
Candela
Distribution
Angle 0.0°
0
10
120˚
90
5
105 470
125 1340
90˚
135 1625
145 1800
160 1840
170 1830
60˚
30˚
0˚
180 1830
Report
13946
13955
13953
13932
13930
CU
80/50/20
RCR
0
1
2
3
4
5
6
7
8
9
10
66
57
50
43
38
34
30
27
24
22
20
NEW
Line Drawings
Overall Height (OAH) is the distance (in inches) from the bottom of the fixture to the
ceiling plane. Example - OAH(36) indicates an overall fixture height of 36"
XPS
Gllenda
Gle
ndale
daalele Spi
Sppi
Sp
pine
nne Center
Cennter
ter
Glelelen
Glenda
lenddaale,
lele, CCa
Californ
a for
alif
ornia
niaa
Speecifi
Spe
ififier:
ifier:
er: Puchl
er
Puch
Pu
chhllik
chl
ik Des
DDees
esisign
ign
g As
AAss
ssoc
ssoooc
ociat
ciat
iaates
ia
attees,
ess,, Innc.,
cc.. Pasad
PPaasad
assa
sad
aaddena
e , CCalifor
en
allliifforniaa
aali
Pho
hoto
ho
to by
by:
by:
y: KKa
Karl
arlr Pu
ar
arl
PPuchl
uchl
chhllikk
Rev: 2012/07/19
316
See pages 318-319 for Infinity Performance segments to create unique configurable shapes
Color Code Required for Painted Finishes
Order
O
Or
Ord
rd
der
er Code
Cood
Co
Cod
de Example
Exam
Exam
xam
xa
amp
plllee
ple
CP5002
CP
CP5
C
P500
P5
00
002
02
2
Model Number
6FS24
6
6F
6FS
FFSS24
24 ((12
(120V)
12
1
20
0V
0V)
V))
V
Source
GLIM
GL
GLI
G
LLIIM
Finish
WIIN
WIN
W
IN
Bottom Detail
DIM(L)
D
DI
DIM
IM(L
IM(
IM
(LL))
(L)
OAH(24)
O
OAH
OA
AH
A
H((24
(2
24
2
4)
Options
Dimensions
OAH must be specified
Standard dimensions are shown below
4' Arc
CP5002
6FS14
6FS24
68-1/4"
24"
48"
(1734 mm)
(610 mm)
(1219 mm)
Mounting Locations
12-3/4" (318mm)
31" (787mm) 31" (787mm)
(Power Art Cable™ can be field installed at either end)
TM
INFINITY PERFORMANCE
L
OAH
R
8' Arc
CP5004
6FS14
6FS24
L
OAH
R
73-3/4"
24"
96"
(1873 mm)
(610 mm)
(2438 mm)
6-7/8" (175mm)
35" (889mm)
35" (889mm)
(Power Art Cable™ can be field installed at either end)
10' Arc
CP5006
2' Straight
CP5010
8FS14
8FS24
CPM
DIM(A)
DIM(EB)
DIM(L)
IEM
MLS2
TL
L
OAH
R
(2340 mm)
(610 mm)
(3048 mm)
8-3/4" (222mm)
44-1/8" (1121mm)
44-1/8" (1121mm)
(Power Art Cable can be field installed at either end)
™
L
OAH
2FS14
2FS24
92-1/8"
24"
120"
24"
24"
(610 mm)
(610 mm)
23-3/8" (593mm)
(Painted)
(Power Art Cable can be field installed at either end)
™
4' Straight
CP5014
8' Circle
CP5020
16' Circle
CP5022
2FS28
2FS54
4FS14
4FS24
24FS14
24FS24
C
A
N
O
P
Y
I
S
P
A
I
N
T
E
D
L
OAH
48"
24"
(1219 mm)
(610 mm)
CNF
SLD
SLT
WIN
47-3/8" (1203mm)
(Power Art Cable™ can be field installed at either end)
D
OAH
W
H
I
T
E
96"
24"
(2438 mm)
(610 mm)
88" (2235mm)
48FS14
48FS24
D
OAH
192"
24"
(4877 mm)
(610 mm)
20' Circle
64FS14
64FS24
Power Art Cable Locations
130-1/8" (3305mm)
CPM
DIM(A)
DIM(L)
IEM
TL
CP5024
Power Art Cable Location
184" (4674mm)
D
OAH
240"
24"
(6096 mm)
(610 mm)
Power Art Cable Locations
164" (4166mm)
232" (5893mm)
800-788-VISA
www.visalighting.com
Rev: 2013/04/10
Finish
Endcap
(Painted)
INDOOR
Model Number
319
Dimensions
Configuration Example
KT5030
KT5080
KT5080
KT5030
(Painted)
8" Square Connector
2-way corner
2-way inline
3-way
KT5055
KT5055
4-way
(Painted)
14" R (90°) Connector
L
R
KT5080
19-3/4"
14"
(502 mm)
(356 mm)
KT5006
PENDANT
KT5040
KT5050
KT5060
KT5070
KT5030
KT5006
KT5085
Abbreviation Key
Arc
R = Outside Radius
FS14
FS21
FS24
FS28
FS39
FS54
L10MR16
Straight
OAH
OAH
L
L
End Cap
8" Square Connector
14" R (90º) Connector
8" Square Connector with Adjustable Accent Light
14" R (90º) Connector with Adjustable Accent Light
L
L
Housing Profile
CH20MR16
T50MR16
14w T-5, mini bi-pin base, FLR
(MVOLT)
21w T-5, mini bi-pin base, FLR
(MVOLT)
24w T-5/HO, mini bi-pin base, FLR
(MVOLT; 347V)
28w T-5, mini bi-pin base, FLR
(MVOLT)
39w T-5/HO, mini bi-pin base, FLR
(MVOLT; 347V)
54w T-5/HO, mini bi-pin base, FLR
(MVOLT; 347V)
10w MAX, GX5.3 base (12V), LED
(120V; 277V)
L10MR16 is a non-integral LED and is not included
20w MR16, G8.5 base, ceramic MH
(MVOLT)
50w MR16, GX5.3 base (12V), halogen
(120V; 277V)
Finishes (see inside back cover)
(Painted)
Color Code Required - see color chart
Bottom Detail
CNF
SLD
SLT
WIN
Options
CPM
DIM(A)
DIM(L)
IEM
LEL
LSP
TL
Confetti
Solid
Slots
Windows
Canopy painted to match
Advance Mark 10 fluorescent dimming, specify 120V or 277V,
FS24 and FS54 only
Lutron H3D 3-wire fluorescent dimming
Integral emergency battery pack, specify 120V or 277V
Elongating lens (T50MR16 only)
Spread lens (T50MR16 only)
Top Lens
™
3-1/2”
(89 mm)
8” (203 mm)
800-788-VISA
www.visalighting.com
Source (Voltage) or MVOLT
MVOLT fixture accepts 120 through 277 input voltage
LED
OAH = Overall Height
Photometrics & 3D Modeling
Complete BIM, Google Sketchup, and
Photometric files for these models can be
downloaded from www.visalighting.com
NEW
L = Length
Source (Voltage)
XPS
Line Drawings
Overall Height (OAH) is the distance (in inches) from the bottom of the fixture to the
ceiling plane. Example - OAH(36) indicates an overall fixture height of 36"
ADA
Power Feed, mounting cable location and quantity are configuration dependent.
Factory Submittal Drawing Required
Rev: 2012/07/19
318
KT5000 Series - configurable segments - See pages 316-317 for Infinity Performance preconfigured models
Model Number
Source
Finish
Bottom Detail
Factory Submittal Drawing Required
Options
Dimensions
OAH must be specified
Standard dimensions are shown below
4' R 1/4 Circle
KT5002
TM
INFINITY PERFORMANCE
8' R 1/8 Circle
KT5004
6FS14
6FS24
6FS14
6FS24
CPM
DIM(A)
DIM(L)
IEM
TL
L
OAH
R
CPM
DIM(A)
DIM(L)
IEM
TL
L
OAH
R
68-1/4"
24"
48"
Connector with Adjustable
Accent Module Detail
(1734 mm)
(610 mm)
(1219 mm)
KT5045
2-way corner
73-3/4"
24"
96"
(1873 mm)
(610 mm)
(2438 mm)
KT5055
2-way inline
10' R 1/8 Circle
KT5006
2' Straight
KT5010
3' Straight
KT5012
8FS14
8FS24
2FS14
2FS24
(Painted)
2FS21
2FS39
CNF
SLD
SLT
WIN
CPM
DIM(A)
DIM(L)
IEM
TL
L
OAH
R
92-1/8"
24"
120"
(2340 mm)
(610 mm)
(3048 mm)
CPM
DIM(A)
DIM(L)
IEM
TL
L
OAH
24"
24"
(610 mm)
(610 mm)
CPM
DIM(L)
IEM
TL
L
OAH
KT5065
3-way
36"
24"
(914 mm)
(610 mm)
KT5075
4-way
4' Straight
KT5014
8" Square Connector - with
Adjustable Accent Light
KT5045
KT5055
KT5065
KT5075
2-way corner
2-way
3-way
CPM
DIM(A)
DIM(L)
IEM
TL
2FS28
2FS54
4FS14
4FS24
1CH20MR16
1T50MR16
1L10MR16
(Painted)
Adjustable accent bezel
is painted black
L
OAH
48"
24"
(1219 mm)
(610 mm)
KT5085
14" R (90º) Connector
LEL
LSP
4-way
KT5030
14" R (90º) Connector - with
Adjustable Accent Light
KT5085
1CH20MR16
1T50MR16
1L10MR16
(Painted)
Adjustable accent bezel
is painted black
LEL
LSP
L
R
19-3/4"
14"
(502 mm)
(356 mm)
KT5055
KT5055
KT5030
KT5055
800-788-VISA
www.visalighting.com
P-4
P-5
GROOVE
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
GROOVE Monopoint
Page 1 of 1
TYPE:
1. Style:
Direct (GRV)
2. Downlight Option:
Suspended with A/C Cable (P)
Suspended with 1/2” stem (ST)
Surface Mount (S)
3. Downlight Option:
**37 Watt MR16 (MR16)
20 Watt CMH-MR16 (GX1020)
39 Watt CMH-MR16 (GX1039)
39 Watt CDM/PAR20 (CDMPAR20)
39 Watt CDM/PAR30 (CDMPAR30)
*CZEN7: Citizen® 1 x 7.6W Watt LED Module, 820LM, 80CRI, 3000K (CZEN7)
*CZEN7DIM: Citizen® 1 x 7.6W Watt LED Module, TRIAC Dimming, 820LM, 80CRI, 3000K (CZEN7DIM)
*CZEN7-H: Citizen® 1 x 7.6W Watt LED Module, Lutron® A Series Dimming, 820LM, 80CRI, 3000K (CZEN7-H)
*CZEN10: Citizen® 1 x 10W Watt LED Module, 1000LM, 80CRI, 3000K (CZEN10)
*CZEN10DIM: Citizen® 1 x 10W Watt LED Module, TRIAC Dimming, 1000LM, 80CRI, 3000K (CZEN10DIM)
*CZEN10-H: Citizen® 1 x 10W Watt LED Module, Lutron® Hilume A Series Dimming, 1000LM, 80CRI, 3000K (CZEN10-H)
*CZEN15: Citizen® 1 x 15W Watt LED Module, 1050LM, 80CRI, 3000K (CZEN15)
*CZEN15-0-10V: Citizen® 1 x 15W Watt LED Module, 0-10V Dimming, 1050LM, 80CRI, 3000K (CZEN15-0-10V)
*CZEN15-H: Citizen® 1 x 15W Watt LED Module, Lutron® A Series Dimming, 1050LM, 80CRI, 3000K (CZEN15-H)
*CZEN20: Citizen® 1 x 20W Watt LED Module, 1200LM, 80CRI, 3000K (CZEN20)
*CZEN20-0-10V: Citizen® 1 x 20W Watt LED Module, 0-10V Dimming, 1200LM, 80CRI, 3000K (CZEN20-0-10V)
**for LED MR16, retrofit lamp only
*No Accessory Options Available
4. Voltage:
120 - 120 volt (120)
277 - 277 volt (277)
**347 - 347 volt
**Not available in dimming
6"
1
5. Finish:
4 2"
* AL (Anodized aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your
*AL is standard on all monopoint products
6. Accessory Option:
*Hex - Hexcell Louvers (HEX)
*SNOOT - Snoot (SNT)
*SOL - Solite Lens (SOL)
*LSS - Linear Spread Lens (LSS)
*All louvers for MR16 Halogen ONLY
Design Specifications
Construction
Single piece machined aluminum housing.
Electrical Details
All Ballasts are Electronic <10% THD
Class P electronic ballasts
All transformers are electronic low voltage.
ETL Listed
Indoor Location Only
Emergency
Remote Emergency Ballast
Finish
AL is brushed clear and anodized aluminum - standard.
Powder Coat options are available. Consult factory.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
GROOVE Monopoint
Page 2 of 2
TYPE:
Standard: Pendant Wire Mounting with adjustable aircraft cable suspension
*4-1/2” dia. canopy
to cover 4-O Octagon Junction box Bullet Aircraft cable
suspension.
*Adjustable GripLock cable suspension
*8FT suspension hardware is standard on all
ALW suspended fixtures
Option: Seismic Bracing
Aircraft cable can
mount on side of
channel to seismic
anchoring.
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
Welcome to Prima Lighting! Contor
Page 1 of 2
P-6
Enter search keywords here
H om e
Rep Finder
Products
Photo G allery
FAQ
Track Shipm ent
M y Account
C ontactU s
H om e > Products > Interchangeable Pendants
C ATEG O RIES
C O N TO R
Interchangeable Pendants
Interchangeable Track H eads
System Code
120V P-Track System
(20) Low Voltage FIT System Fixtures
Low Voltage M onorailSystem
Lum en Style
Low Voltage FIT ISystem
L0
D escription
LED N on-D im m able PendantLum en
Low Voltage FIT IISystem
Catalog N o.
D escription
Low Voltage Cable System
Low Voltage M ini-Alum inum
RailSystem s
Low Voltage M ini-Transparent
RailSystem s
LED D isplay Fixtures
P2840L
10"Acrylic Tube
P2841
6"Alum inum Tube
P2841L
10"Alum inum Tube
BK
H igh Pow erLED W allW asher
Bar
Suspension Code
P2840
P2840L
P2841
BC
Lam p Type
120V Flush D irectIndoorLED
Strip
120V LED U nderCabinetTask
Light
6"Acrylic Tube
H ardw are Finish
12V Picture Lights
24V Flush D irectIndoorLED
Strip
P2840
*LED -W
D escription
Black Finish
D escription
Black Cord 72"
D escription
LED 2700K W arm W hite M odule Included
P2841L
M onopointCanopy Selections
M ultipointCanopy Selection
LED Ceiling Recess Trim s W ith
Rough-In H ousing
LED Ceiling Recess Trim s
W ithoutH ousing
RELATED PRO D U C TS
LED CabinetRecess Trim
LED W allRecess Fixtures
LED Step Recess Light
12V Interchangeable Recess
Trim s
12V M iniature RecessTrim sFor
Ceiling orCabinet
W allSconces
Transform ers& LED D rivers
Lam ps & O pticalAccessories
M ulti-SpotCeiling Fixture
http://www.primalighting.com/product.php?pid=1017&pcid=1
12/19/2013
Welcome to Prima Lighting! Contor
Page 2 of 2
© C opyright2012.Prim a Lighting.AllRightsReserved.
H om e | Rep Finder | Register | Products | D esign YourLighting System | Photo G allery | FAQ | Track Shipm ent | M y Account | C ontactU s
http://www.primalighting.com/product.php?pid=1017&pcid=1
12/19/2013
PORTFOLIO TM
D ES C R IPTION
6 inch LED recessed narrow beam downlight specially designed for LED
technology. Two-stage reflector system produces smooth distribution
with excellent light control and low aperture brightness. Lumen packages
include 1000 and 1500 delivered lumens with color temperatures of
2700K, 3000K, 3500K, 4000K. Suitable for commercial construction and
exceeds high efficacy requirements (with designated trims) for T24.
Energy Star qualified.
Type
Catalog #
Project
Date
Comments
Prepared by
S PEC IFIC A TION FEA T U R E S
Lo we r S h i e l d i n g Re fl e c tor
The rma l
En viron mental
Self-flanged, spun .050" thick
aluminum lower reflector in
combination with a lensed upper
optical chamber provides superior
lumen output with minimal source
brightness. Available in all Portfolio
Alzak® finishes.
Extruded aluminum heat sink
conducts heat away from the LED
module for improved performance
and longer life.
Fixture should not be operated in
ambient temperatures above 40° C.
Trim Retention
Lower reflector is retained with
two torsion springs holding the
flange tightly to the finished ceiling
surface.
Pla s t e r F r a m e / Col l a r
New Construction Housing: Die
cast aluminum 1-1/2" deep collar
accommodates ceiling materials
up to 2".
Un i v e r s a l M o u n t i ng Bra c ke t
Accepts 1/2" EMT, C channel
and bar hangers and adjusts 5"
vertically from above and below
the ceiling.
Ju n c t i o n B o x
(4) 1/2" and (2) 3/4" trade size pry
outs positioned to allow straight
conduit runs. Listed for (8) #12
AWG (four in, four out) 90°C
conductors and feed thru branch
wiring.
L ED
LED system contains a plurality
of high brightness white LED’s
combined with a high reflectance
upper reflector and convex
transitional lens producing even
distribution with no pixilation.
Rated for 50,000 hours at 70%
lumen maintenance. Auto
resetting, thermally protected,
LED’s are turned off when safe
operating temperatures are
exceeded. Color variation within
3-step MacAdam ellipses. Flexible
disconnect allows for tool-less
replacement of LED engine from
below ceiling. Available in 80 or
90 CRI.
Co d e Co mplian ce
Thermally protected and cULus
listed for protected wet locations.
IP66 rated when used with IP66
gasket kit accessory. Optional
City of Chicago environmental
air (CCEA) marking for plenum
applications. EMI/RFI emissions
per FCC 47CFR Part 18 Class B
consumer limits. Non-IC rated Insulation must be kept 3" from
top and sides of housing. RoHS
Compliant. Photometric testing
completed in accordance with IES
LM 79 standards. LED life testing
completed in accordance with LM
80 standards.
LD6A10
LD6A15
6LN
1000 Lumen LED
1500 Lumen LED
STEPREPEAT>
Warran ty
5 year warranty.
D ri v e r
6-Inch
Combination 120-277V 0-10V
or120V trailing edge phase
cut driver provides flicker free
dimming from 100% to 10%.
Optional 1% 0-10V, Fifth Light,
DMX or Lutron® Ecosystem. Driver
can be serviced from above or
through the aperture.
Narrow Beam Downlight
New Construction
Qualified and Compliant. Refer to the
ENERGY STAR® Qualified Product List
and CEC (T24) Appliance Database
for listings.
TOP VIEW - NEW CONSTRUCTION
11-1/8"
[281mm]
ENERGY DATA
Sound Rating: Class A standards
6-3/16"
[157mm]
Operating Temperature: 40°C (104°F)
12-1/4" [312mm]
1500 Lumen D010TE
(Values at non-dimming line voltage)
TOP VIEW - NEW CONSTRUCTION WITH BATTERY
Minimum Starting Temperature: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
Input Voltage: UNV (120V - 277V)
5-5/8" [143mm]
Power Factor: >0.90 (at nominal input 120/277 VAC & 100% of
Rated Output Power)
NEW CONSTRUCTION
6-3/8" [162mm]
7" [176mm]
Input Power: 22.4W
THD: <20%
120V Input Current: .12A
277V Input Current: .09A
Maximum Non-IC Ambient Continuous
Note: Max Opening 6-1/2" [165mm]
13-3/8"
[339mm]
Input Frequency: 50-60Hz
1000 Lumen D010TE
(Values at non-dimming line voltage)
Minimum Starting Temperature: -30°C (-22°F)
16-13/16" [472mm]
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
Input Voltage: UNV (120V - 277V)
Power Factor: >0.90 (at nominal input 120/277 VAC & 100% of
Rated Output Power)
Input Power: 14.1W
THD: <20%
120V Input Current: .12A
277V Input Current: .06A
Maximum Non-IC Ambient Continuous
Input Frequency: 50-60Hz
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP110790
2013-11-20 15:38:35
LD6A10 LD6A15 6LN
OR D ER ING INFOR M A TION
EXAMPLE: LD6A15D010TE ERM6A15835 6LN0LI=6” LED Narrow Beam Reflector, 1500 Lumen 3,500 K Color with Universal 120 - 277V, 0 - 10 Driver
Housing
Lumens1
LD6A=6”Aperture,
LD6ACP=6”Aperture,
Remodel Chicago
10=1000
Lumens
15=1500
Lumens
D ri v e r
Options
D010TE=120-277V 0-10V 10%
Dimming or Trailing Edge 120V
Dimming
D010TR=120-277V 0-10V 10% Dimming
or Leading Edge 120V Dimming
D5LT= Fifth Light® (DALI) Dimming
1-100%
DE010=1 to 100% Dimming,
120-277V 50/60Hz, 0-10V
DL3=1 to 100% Dimming, 120-277V
Lutron® Hi-Lume, Ecosystem or 3 Wire
DLT=1 to 100% Dimming, 120V
Lutron® Hi-Lume Forward Phase
Dimming
DMX=DMX Dimming 1-100%
EMBOD=Bodine®
Emergency Module
with Remote Test
Switch
IEMBOD=Bodine®
Emergency Module
with Integral Test
Switch
R e fl e c to r
Finish
6LN0=6” Narrow Reflector,
Polymer Trim Ring
6LN1=6” Narrow Reflector,
Self-flanged
6LN0E=6” Narrow Reflector,
Polymer Trim Ring for use with
IEM Integral Emergency Option
6LN1E=6” Narrow Reflector,
Self-flanged for use with IEM
Integral Emergency Option
LI=Specular Clear
H=Semi-Specular Clear
WMH=Warm Haze
G=Specular Gold
WH=Wheat
WHH=Wheat Haze
GP=Graphite
GPH=Graphite Haze
Pow e r M o d u l e
ERN6A10=6”, 1000 Lumen
Module for Narrow Beam
Reflector
ERN6A15=6”, 1500 Lumen
Module for Narrow Beam
Reflector
Options
B=Specular Black
W=Gloss White
CRI
Color
8=80 CRI
9=90 CRI
27=2700° K
30=3000° K
35=3500° K
40=4000° K
27CP=2700° K, Chicago Plenum
30CP=3000° K, Chicago Plenum
35CP=3500° K, Chicago Plenum
40CP=4000° K, Chicago Plenum
Ac c e s s o ri e s
Self-Flanged Only
WF=White
Painted Flange
6LN0, 6LN0E Only
BB=Black Baffle
WB=White Baffle
HB26=C-channel Bar Hanger,
26” Long, Pair
HB50=C-channel Bar Hanger,
50” Long, Pair
RMB22=Wood Joist Bar Hanger,
22” Long, Pair
H277=277 to 120V Step Down
Transformer, 300VA
H347=347 to 120V Step Down
Transformer, 75VA
H347200=347 to 120V Step Down
Transformer, 200VA Housings, Specify
Slope
HSA6=Slope Adapter for 6” Aperture
Housings, Specify Slope
TRM6=Metal Trim Ring, Specify Color2
TRR6=Rimless Trim Ring2
DT6=Deco Trim2
LGSKT6IP66=IP66 Gasket Kit
Notes: 1 Nominal Lumens will vary depending on selected color, driver and reflector finish.
2 Order trim with polymer trim ring (Consult specification sheet for color ordering information and options).
3 Not available with Chicago Plenum.
PH OTOM ETR IC S
CANDLEPOWER DISTRIBUTION
CANDELA TABLE
Downlight
90º
75º
600
60º
1200
45º
1800
15º
30º
Test Number
P98195
LD6A15D010TE ERN6A835 6LN1H
Lumens
1277
Efficacy
58.6 Lm/W
Watts
21.8
CCT
3500K
SC
0.74
Degrees
Vertical
0
5
15
25
35
45
55
CONE OF LIGHT
Distance
Fixture to
Lighted Plane
5'5"
7'
8'
9'
10'
12'
Initial
Footcandles
at Nadir
55
34
26
20
16
11
Beam
Diameter
4.0
5.0
5.8
6.6
7.2
8.8
Candela
1684
1623
1223
853
454
97
22
65
8
75
3
85
0
90
0
ZONAL LUMEN SUMMARY
Zone
0-30
0-40
0-60
0-90
90-180
0-180
Lumens
881
1160
1266
1277
0
1277
%Fixture
69.0
90.8
99.1
100
0
100
LUMINANCE
Average Candella
Degrees
45
55
65
75
85
Average 0°
Luminance
8959
2548
1158
756
0
EMBOD MULTIPLIER
1000 Lumen= .64
1500 Lumen= .45
CANDLEPOWER DISTRIBUTION
CANDELA TABLE
Downlight
90º
75º
1450
60º
2900
45º
4350
15º
30º
Test Number
P97939
LD6A15D010TE ERN6A835 6LN1LI
Lumens
1450
Efficacy
66.5 Lm/W
Watts
21.8
CCT
3500K
SC
0.41
Degrees
Vertical
0
5
15
25
35
45
55
CONE OF LIGHT
Distance
Fixture to
Lighted Plane
5'5"
7'
8'
9'
10'
12'
Initial
Footcandles
at Nadir
139
86
66
52
42
29
Beam
Diameter
2.2
2.8
3.2
3.6
4.0
4.8
Candela
4226
3654
1689
823
374
45
3
65
1
75
0
85
0
90
0
ZONAL LUMEN SUMMARY
Zone
0-30
0-40
0-60
0-90
90-180
0-180
Lumens
1171
1401
1449
1450
0
1450
%Fixture
80.8
96.6
99.9
100
0
100
LUMINANCE
Average Candella
Degrees
45
55
65
75
85
Average 0°
Luminance
4133
353
154
0
0
EMBOD MULTIPLIER
1000 Lumen= .64
1500 Lumen= .45
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP110790
2013-11-20 15:38:35
LD6A10 LD6A15 6LN
PH OTOM ETR IC S
CCT Multiplication Factors
1000 Lumen
80 CRI
1500 Lumen
1000 Lumen
90 CRI
1500 Lumen
CCT [K]
Multiplier from
3500K
2700
3000
3500
4000
2700
3000
3500
4000
0.93
0.99
1.00
1.01
0.93
0.99
1.00
1.01
2700
3000
3500
4000
2700
3000
3500
4000
0.88
0.95
1.00
1.03
0.88
0.94
1.00
1.03
80 -> 90 CRI
0.79
0.80
0.84
0.86
0.79
0.79
0.84
0.86
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP110790
2013-11-20 15:38:35
PORTFOLIO TM
D ES C R IPTION
6 inch LED recessed wide beam wall wash specially designed for LED
technology. Two-stage reflector system combined with a Gradient Kicker,
produces high levels of uniform vertical illumination on the wall with
minimal source brightness. Color temperatures of 2700K, 3000K, 3500K,
4000K. Suitable for commercial construction and exceeds high efficacy
requirements (with designated trims) for Title 24. Energy Star Qualified.
Type
Catalog #
Project
Date
Comments
Prepared by
S PEC IFIC A TION FEA T U R E S
Lo we r W a l l W a s h Re fl e c tor
The rma l
En viron mental
Spun .050" thick aluminum lower
reflector with gradient kicker in
combInation with a lensed upper
optical chamber provides superior
lumen output, high level vertical
illumination with minimal source
brightness. Available in all Portfolio
Alzak® finishes.
Extruded aluminum heat sink
conducts heat away from the LED
module for improved performance
and longer life.
Fixture should not be operated in
ambient temperatures above 40° C.
Trim Retention
Reflector is retained with two
torsion springs holding the flange
tightly to the finished ceiling
surface.
Pla s t e r F r a m e / Col l a r
New Construction Housing: Die
cast aluminum 1-1/2" deep collar
accommodates ceiling materials
up to 2".
Un i v e r s a l M o u n t i ng Bra c ke t
Accepts 1/2" EMT, C channel
and bar hangers and adjusts 5"
vertically from above and below
the ceiling.
L ED
LED system contains a plurality
of high brightness white LED’s
combined with a high reflectance
upper reflector and convex
transitional lens producing even
distribution with no pixilation.
Rated for 50,000 hours at 70%
lumen maintenance. Auto
resetting, thermally protected,
LED’s are turned off when safe
operating temperatures are
exceeded. Color variation within
3-step MacAdam ellipses. Flexible
disconnect allows for tool-less
replacement of LED engine from
below ceiling. Available in 80 or
90 CRI.
Co d e Co mplian ce
Thermally protected and cULus
listed for protected damp
locations. Optional City of Chicago
environmental air (CCEA) marking
for plenum applications. EMI/
RFI emissions per FCC 47CFR
Part 18 Class B consumer limits.
Non-IC rated - Insulation must
be kept 3" from top and sides of
housing. RoHS Compliant. Title 24
Compliant with designated trims.
ARRA Compliant. Photometric
testing completed in accordance
with IES LM 79 standards. LED life
testing completed in accordance
with LM 80 standards.
LD6A10
LD6A15
6LW111
1000 Lumen LED
1500 Lumen LED
STEPREPEAT>
Warran ty
5 year warranty.
D ri v e r
6-Inch
Driver can be serviced from above
or through the aperture.
Wide Beam Wall Wash
Ju n c t i o n B o x
New Construction
(4) 1/2" and (2) 3/4" trade size pry
outs positioned to allow straight
conduit runs. Listed for (8) #12
AWG (four in, four out) 90°C
conductors and feed thru branch
wiring.
Qualified and Compliant. Refer to the
ENERGY STAR® Qualified Product List
and CEC (T24) Appliance Database
for listings.
ENERGY DATA
TOP VIEW - NEW CONSTRUCTION
Sound Rating: Class A standards
Operating Temperature: 40°C (104°F)
1500 Lumen D010TE
11-1/8"
[281mm]
(Values at non-dimming line voltage)
Minimum Starting Temperature: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
Input Voltage: UNV (120V - 277V)
5-5/8"
[141.7mm]
Power Factor: >0.90 (at nominal input 120/277 VAC & 100% of
Rated Output Power)
12-1/4" [312mm]
Input Power: 22.4W
THD: <20%
120V Input Current: .12A
277V Input Current: .09A
Maximum Non-IC Ambient Continuous
TOP VIEW - NEW CONSTRUCTION WITH BATTERY
5-5/8" [143mm]
1000 Lumen D010TE
NEW CONSTRUCTION
(Values at non-dimming line voltage)
Minimum Starting Temperature: -30°C (-22°F)
6-3/8" [162mm]
7" [176mm]
Input Frequency: 50-60Hz
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
Note: Max Opening 6 1/2" [165mm]
Input Voltage: UNV (120V - 277V)
13-3/8"
[339mm]
Power Factor: >0.90 (at nominal input 120/277 VAC & 100% of
Rated Output Power)
Input Power: 14.1W
THD: <20%
120V Input Current: .12A
277V Input Current: .06A
Maximum Non-IC Ambient Continuous
Input Frequency: 50-60Hz
16-13/16" [472mm]
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP100431
2013-11-20 15:38:35
LD6A10 LD6A15 6LW111
OR D ER IN G INFOR M A TION
E X A M P L E : L D 6 A 1 5 D 010 T E E R W 6 A 1 5 8 3 5 6 LW 111 L I = 6 ” L E D W i d e Wa l l Wa s h , 1 5 0 0 L u m e n 3 , 5 0 0 K C o l o r w i t h U n i v e r s a l 1 2 0 - 2 7 7 V, 0 - 10 D r i v e r
Housing
LD6A=6” Aperture
LD6ACP=6” Aperture,
Chicago Plenum
Lumens1
D ri v e r
Options
D010TE=120-277V 0-10V 10%
Dimming or Trailing Edge 120V
Dimming
D010TR=120-277V 0-10V 10% Dimming
or Leading Edge 120V Dimming
D5LT=Fifth Light® (DALI) Dimming
1-100%
DE010=1 to 100% Dimming,
120-277V 50/60Hz, 0-10V
DL3=1 to 100% Dimming, 120-277V
Lutron® Hi-Lume, Ecosystem or 3 Wire
DLT=1 to 100% Dimming, 120V
Lutron® Hi-Lume Forward Phase
Dimming
DMX=DMX Dimming 1-100%
10=1000
Lumens
15=1500
Lumens
R e fl e c t o r
EMBOD=Bodine®
Emergency Module
with Remote Test
Switch3
Finish
6LW111=6” Wide Reflector,
Single Wall Wash, Self-flanged
6LW121=6” Wide Reflector,
Double Wall Wash, Self-flanged
6LW110=6” Wide Reflector,
Single Wall Wash, Polymer
Trim Ring
6LW120=6” Wide Reflector,
Double Wall Wash, Polymer
Trim Ring
LI=Specular Clear
H=Semi-Specular Clear
WMH=Warm Haze
G=Specular Gold
WH=Wheat
WHH=Wheat Haze
GP=Graphite
GPH=Graphite Haze
Po w e r M o d u l e
CRI
ERW6A10=6”, 1000 Lumen
Module for Wide Beam
Reflector
ERW6A15=6”, 1500 Lumen
Module for Wide Beam
Reflector
8=80 CRI
9=90 CRI
Options
B=Specular Black
W=Gloss White
Color
27=2700° K
30=3000° K
35=3500° K
40=4000° K
27CP=2700° K, Chicago Plenum
30CP=3000° K, Chicago Plenum
35CP=3500° K, Chicago Plenum
40CP=4000° K, Chicago Plenum
A c c e s s o ri e s
Self-flanged Only
WF=White
Painted Flange
HB26=C-channel Bar Hanger,
26” Long, Pair
HB50=C-channel Bar Hanger,
50” Long, Pair
RMB22=Wood Joist Bar Hanger,
22” Long, Pair
H277=277 to 120V Step Down
Transformer, 300VA
H347=347 to 120V Step Down
Transformer, 75VA
H347200=347 to 120V Step Down
Transformer, 200VA Housings, Specify
Slope
TRM6=Metal Trim Ring, Specify Color2
TRR6=Rimless Trim Ring2
ABR6P=Remodel Adaptor Ring for 7” OD
Notes: 1 Nominal Lumens will vary depending on selected Color, driver and reflector finish.
2 Order trim with polymer trim ring (Consult specification sheet for color ordering information and options).
3 Not available with Chicago Plenum.
PHOTOM ETR IC S
CANDLEPOWER DISTRIBUTION
EMBOD MULTIPLIER
Downlight
Wall Washer
90º
90º
75º
75º
350
60º
Test Number
P98355
LD6A15D010TE ERW6A835
Element
6LW111H
Lumens
1458
Efficacy
66.9 Lm/W
Watts
21.8
CCT
3500K
1000 Lumen= .64
1500 Lumen= .45
60º
700
45º
45º
30º
1050
15º
LEGEND:
0-deg:
90-deg:
15º
SINGLE UNIT FOOTCANDLES
MULTIPLE UNIT FOOTCANDLES
3' FROM WALL
30º
2.5' FROM WALL
(Distance From Fixture Along
Wall)
DD
1'
2'
3'
4'
5'
6'
7'
8'
9'
10'
6
12
11
11
9
7
5
4
3
2
1'
2'
3'
5
11
10
10
8
6
5
3
3
2
2
7
7
7
6
5
4
3
2
2
1
3
4
4
4
4
3
3
2
2
3' FROM WALL
(Spacing Between Fixtures)
2'
16
26
24
22
17
12
9
6
5
3
18
30
27
24
18
13
9
6
5
4
(Spacing Between Fixtures)
3'
16
26
24
22
17
12
9
6
5
3
13
21
21
18
14
11
8
6
4
3
12
23
21
20
16
12
8
6
5
3
2'
13
21
21
18
14
11
8
6
4
3
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
9
19
18
18
16
12
9
7
5
4
10
21
20
19
17
13
9
7
5
4
3'
9
19
18
18
16
12
9
7
5
4
7
16
15
15
13
11
8
6
5
4
8
18
17
16
15
12
9
7
5
4
7
16
15
15
13
11
8
6
5
4
ADP100431
2013-11-20 15:38:35
LD6A10 LD6A15 6LW111
PH OTOM ETR IC S
CANDLEPOWER DISTRIBUTION
EMBOD MULTIPLIER
Downlight
Wall Washer
90º
90º
75º
75º
350
60º
Test Number
P98355
LD6A15D010TE ERW6A835
Element
6LW111H
Lumens
1458
Efficacy
66.9 Lm/W
Watts
21.8
CCT
3500K
1000 Lumen= .64
1500 Lumen= .45
60º
700
45º
45º
30º
1050
15º
LEGEND:
0-deg:
90-deg:
15º
SINGLE UNIT FOOTCANDLES
MULTIPLE UNIT FOOTCANDLES
3' FROM WALL
30º
2.5' FROM WALL
(Distance From Fixture Along
Wall)
DD
1'
2'
3'
4'
5'
6'
7'
8'
9'
10'
6
12
11
11
9
7
5
4
3
2
1'
2'
3'
5
11
10
10
8
6
5
3
3
2
2
7
7
7
6
5
4
3
2
2
1
3
4
4
4
4
3
3
2
2
3' FROM WALL
(Spacing Between Fixtures)
2'
16
26
24
22
17
12
9
6
5
3
18
30
27
24
18
13
9
6
5
4
CCT Multiplication Factors
1000 Lumen
80 CRI
1500 Lumen
1000 Lumen
90 CRI
1500 Lumen
(Spacing Between Fixtures)
3'
16
26
24
22
17
12
9
6
5
3
13
21
21
18
14
11
8
6
4
3
12
23
21
20
16
12
8
6
5
3
2'
13
21
21
18
14
11
8
6
4
3
9
19
18
18
16
12
9
7
5
4
10
21
20
19
17
13
9
7
5
4
3'
9
19
18
18
16
12
9
7
5
4
CCT [K]
Multiplier from
3500K
2700
3000
3500
4000
2700
3000
3500
4000
0.93
0.99
1.00
1.01
0.93
0.99
1.00
1.01
2700
3000
3500
4000
2700
3000
3500
4000
0.88
0.95
1.00
1.03
0.88
0.94
1.00
1.03
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
7
16
15
15
13
11
8
6
5
4
8
18
17
16
15
12
9
7
5
4
7
16
15
15
13
11
8
6
5
4
80 -> 90 CRI
0.79
0.80
0.84
0.86
0.79
0.79
0.84
0.86
ADP100431
2013-11-20 15:38:35
PORTFOLIO TM
D ES C R IPTION
6 inch LED recessed medium beam downlight with 50° cut off specially
designed for LED technology. Two-stage reflector system produces
smooth distribution with excellent light control and low aperture
brightness. Lumen packages include 2000 delivered lumens with color
temperatures of 2700K, 3000K, 3500K, 4000K. Suitable for commercial
construction and exceeds high efficacy requirements (with designated
trims) for T24. Energy Star qualified.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Lo w e r S h i e l d i n g Re fl e c tor
The rma l
En viron mental
Self-flanged, spun .050" thick
aluminum lower reflector in
combination with a lensed upper
optical chamber provides superior
lumen output with minimal source
brightness. Available in all Portfolio
Alzak® finishes.
Extruded aluminum heat sink
conducts heat away from the LED
module for improved performance
and longer life.
Fixture should not be operated in
ambient temperatures above 40° C.
Trim Retention
Lower reflector is retained with
two torsion springs holding the
flange tightly to the finished ceiling
surface.
Pla s t e r F r a m e / Col l a r
New Construction Housing: Die
cast aluminum 1-1/2" deep collar
accommodates ceiling materials
up to 2".
U n i v e r s a l M o u n t ing Bra c ke t
Accepts 1/2" EMT, C channel
and bar hangers and adjusts 5"
vertically from above and below
the ceiling.
Ju n c t i o n B o x
(4) 1/2" and (2) 3/4" trade size pry
outs positioned to allow straight
conduit runs. Listed for (8) #12
AWG (four in, four out) 90°C
conductors and feed thru branch
wiring.
L ED
LED system contains a plurality
of high brightness white LED’s
combined with a high reflectance
upper reflector and convex
transitional lens producing even
distribution with no pixilation.
Rated for 50,000 hours at 70%
lumen maintenance. Auto
resetting, thermally protected,
LED’s are turned off when safe
operating temperatures are
exceeded. Color variation within
3-step MacAdam ellipses. Flexible
disconnect allows for tool-less
replacement of LED engine from
below ceiling. Available in 80 or
90 CRI.
Co d e Co mplian ce
Thermally protected and cULus
listed for protected wet locations.
IP66 rated when used with IP66
gasket kit accessory. Optional
City of Chicago environmental
air (CCEA) marking for plenum
applications. EMI/RFI emissions
per FCC 47CFR Part 18 Class B
consumer limits. Non-IC rated Insulation must be kept 3" from
top and sides of housing. RoHS
Compliant. Title 24 Compliant
with designated trims. ARRA
Compliant. Photometric testing
completed in accordance with IES
LM 79 standards. LED life testing
completed in accordance with LM
80 standards.
LD6A20
6LM
2000 Lumen LED
STEPREPEAT>
6-Inch
Medium Beam Downlight
Warran ty
5 year warranty.
D ri v e r
New Construction
Combination 120-277V 0-10V or
120V trailing edge phase cut driver
provides flicker free dimming
from 100% to 10%. Optional
1% 0-10V, Fifth Light, DMX or
Lutron® Ecosystem. Driver can be
serviced from above or through the
aperture.
Qualified and Compliant. Refer to the
ENERGY STAR® Qualified Product List
and CEC (T24) Appliance Database
for listings.
TOP VIEW - NEW CONSTRUCTION
ENERGY DATA
11-1/8"
[281mm]
Sound Rating: Class A standards
Operating Temperature: 40°C (104°F)
2000 Lumen D010TE
(Values at non-dimming line voltage)
Minimum Starting Temperature: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
6-1/2"
[165.1mm]
Input Voltage: UNV (120V - 277V)
12-1/4" [312mm]
Power Factor: >0.90 (at nominal input 120-277 VAC & 100% of
Rated Output Power)
TOP VIEW - NEW CONSTRUCTION WITH BATTERY
Input Power: 31.5W
THD: <20%
120V Input Current: .27A
277V Input Current: .12A
Maximum Non-IC Ambient Continuous
Input Frequency: 50-60Hz
5-5/8" [143mm]
NEW CONSTRUCTION
6-3/8" [162mm]
7" [176mm]
Note: Max Opening 6-1/2" [165mm]
13-3/8"
[339mm]
16-13/16" [472mm]
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP110815
2014-01-23 14:30:22
LD6A20 6LM
OR D ER ING INFOR M A TION
E X A M P L E : L D 6 A 2 0 D 010 T E E RW 6 A 2 0 8 3 5 6 L M 0 L I = 6 ” L E D M e d i u m B e a m Re fl e c t o r L e n s , 2 0 0 0 L u m e n 3 , 5 0 0 K C o l o r w i t h U n i v e r s a l 1 2 0 - 2 7 7 V, 0 - 10 D r i v e r
Housing
Lumens1
LD6A=6” Aperture
LD6ACP=6” Aperture,
Chicago Plenum
D ri ve r
D010TE=120-277V 0-10V 10%
Dimming or Trailing Edge 120V
Dimming
D010TR=120-277V 0-10V 10% Dimming
or Leading Edge 120V Dimming
D5LT=Fifth Light® (DALI) Dimming
1-100%
DE010=1 to 100% Dimming,
120-277V 50/60Hz, 0-10V
DL3=1 to 100% Dimming, 120-277V
Lutron® Hi-Lume, Ecosystem or 3 Wire
DLT=1 to 100% Dimming, 120V
Lutron® Hi-Lume Forward Phase
Dimming
DMX=DMX Dimming 1-100%
20=2000
Lumens
R e fl e c to r
Finish
6LM0=6” Medium Beam
Reflector, Polymer Trim Ring
6LM1=6” Medium Beam
Reflector, Self-flanged
6LM0E=6” Medium Reflector,
Polymer Trim Ring for use with
IEM Integral Emergency Option
6LM1E=6” Medium Reflector,
Self-flanged for use with IEM
Integral Emergency Option
Notes: 1
2
3
4
Options
LI=Specular Clear
H=Semi-Specular Clear
WMH=Warm Haze
G=Specular Gold
WH=Wheat
WHH=Wheat Haze
GP=Graphite
GPH=Graphite Haze
Pow e r M o d u l e
CRI
ERM6A20=6”, 2000 Lumen
Module for Medium Beam
Reflector
EMBOD=Bodine®
Emergency Module
with Remote Test
Switch3
IEMBOD=Bodine®
Emergency Module
with Integral Test
Switch 3,4
8=80 CRI
9=90 CRI
Options
B=Specular Black
W=Gloss White
Self-flanged Only
WF=White
Painted Flange
6LM0 Only
BB=Black Baffle
WB
Color
27=2700° K
30=3000° K
35=3500° K
40=4000° K
27CP=2700° K, Chicago Plenum
30CP=3000° K, Chicago Plenum
35CP=3500° K, Chicago Plenum
40CP=4000° K, Chicago Plenum
A c c e s s o ri e s
HB26=C-channel Bar Hanger,
26” Long, Pair
HB50=C-channel Bar Hanger,
50” Long, Pair
RMB22=Wood Joist Bar Hanger,
22” Long, Pair
H277=277 to 120V Step Down
Transformer, 300VA
H347=347 to 120V Step Down
Transformer, 75VA
H347200=347 to 120V Step Down
Transformer, 200VA Housings, Specify
Slope
HSA6=Slope Adapter for 6” Aperture
Housings, Specify Slope
TRM6
TRR6=Rimless Trim Ring2
DT6=Deco trim2
LGSKT6IP66=IP66 Gasket Kit
Nominal Lumens will vary depending on selected color, driver and reflector finish.
Order trim with polymer trim ring (Consult specification sheet for color ordering information and options).
Not available with Chicago Plenum.
Not CSA approved.
PHOTOM ETR IC S
CANDLEPOWER DISTRIBUTION
CANDELA TABLE
Downlight
90º
75º
750
60º
1500
45º
2250
15º
30º
Test Number
P98531
LD6A20D010TE ERM6A835 6LM1H
Lumens
2018
Efficacy
64.1 Lm/W
Watts
31.5
CCT
3500K
SC
0.91
Degrees
Vertical
0
5
15
25
35
45
55
CONE OF LIGHT
Distance
Fixture to
Lighted Plane
5'5"
7'
8'
9'
10'
12'
Initial
Footcandles
at Nadir
73
45
34
27
22
15
Beam
Diameter
4.8
6.2
7.2
8.0
9.0
10.8
CANDLEPOWER DISTRIBUTION
90º
75º
1000
60º
2000
45º
15º
2212
2164
1855
1435
698
180
40
65
12
75
3
85
1
90
0
CANDELA TABLE
Downlight
3000
Candela
30º
Test Number
P97631
LD6A20D010TE ERM6A835 6LM1LI
Lumens
2301
Efficacy
73 Lm/W
Watts
31.5
CCT
3500K
SC
0.85
Degrees
Vertical
0
5
15
25
35
45
55
CONE OF LIGHT
Distance
Fixture to
Lighted Plane
5'5"
7'
8'
9'
10'
12'
Initial
Footcandles
at Nadir
97
60
45
36
29
20
Beam
Diameter
4.6
5.8
6.8
7.6
8.4
10.2
Candela
2940
2913
2588
1706
694
85
9
65
4
75
2
85
0
90
0
ZONAL LUMEN SUMMARY
Zone
0-30
0-40
0-60
0-90
90-180
0-180
Lumens
1370
1810
2001
2018
0
2018
LUMINANCE
Average Candella
Degrees
45
55
65
75
85
%Fixture
67.9
89.7
99.2
100
0
100
EMBOD MULTIPLIER
Average 0°
Luminance
16654
4504
1775
781
749
2000 Lumen= 31
ZONAL LUMEN SUMMARY
Zone
0-30
0-40
0-60
0-90
90-180
0-180
Lumens
1768
2204
2296
2301
0
2301
LUMINANCE
Average Candella
Degrees
45
55
65
75
85
%Fixture
76.9
95.8
99.8
100
0
100
EMBOD MULTIPLIER
Average 0°
Luminance
6865
887
487
376
0
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
2000 Lumen= 31
ADP110815
2014-01-23 14:30:22
LD6A20 6LM
PH OTOM ETR IC S
CCT Multiplication Factors
80 CRI
2000 Lumen
90 CRI
2000 Lumen
CCT [K]
Multiplier from
3500K
2700
3000
3500
4000
2700
3000
3500
4000
0.93
0.99
1.00
1.01
0.88
0.94
1.00
1.03
80 -> 90 CRI
0.79
0.80
0.84
0.85
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP110815
2014-01-23 14:30:22
PORTFOLIO TM
D ES C R IPTION
6 inch LED recessed wide wall wash specially designed for LED
technology. Two-stage reflector system combined with a Gradient Kicker,
produces high levels of uniform vertical illumination on the wall with
minimal source brightness. Color temperatures of 2700K, 3000K, 3500K,
4000K. Suitable for commercial construction and exceeds high efficacy
requirements (with designated trims) for T24. Energy Star qualified.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Lo w e r W a l l W a s h Re fl e c tor
The rma l
E n viron mental
Spun .050" thick aluminum lower
reflector with gradient kicker in
combInation with a lensed upper
optical chamber provides superior
lumen output, high level vertical
illumination with minimal source
brightness. Available in all Portfolio
Alzak® finishes.
Extruded aluminum heat sink
conducts heat away from the LED
module for improved performance
and longer life.
Fixture should not be operated in
ambient temperatures above 40° C.
Trim Retention
Reflector is retained with two
torsion springs holding the flange
tightly to
Pla s t e r F r a m e / Col l a r
New Construction Housing: Die
cast aluminum 1-1/2" deep collar
accommodates ceiling materials
up to 2".
U n i v e r s a l M o u n t ing Bra c ke t
Accepts 1/2" EMT, C channel
and bar hangers and adjusts 5"
vertically from above and below
the ceiling.
Ju n c t i o n B o x
(4) 1/2" and (2) 3/4" trade size pry
outs positioned to allow straight
conduit runs. Listed for (8) #12
AWG (four in, four out) 90°C
conductors and feed thru branch
wiring.
L ED
LED system contains a plurality
of high brightness white LED’s
combined with a high reflectance
upper reflector and convex
transitional lens producing even
distribution with no pixilation.
Rated for 50,000 hours at 70%
lumen maintenance. Auto
resetting, thermally protected,
LED’s are turned off when safe
operating temperatures are
exceeded. Color variation within
3-step MacAdam ellipses. Flexible
disconnect allows for tool-less
replacement of LED engine from
below ceiling. Available in 80 or
90 CRI.
Cod e Co mplian ce
Thermally protected and cULus
listed for protected damp
locations. Optional City of Chicago
environmental air (CCEA) marking
for plenum applications. EMI/
RFI emissions per FCC 47CFR
Part 18 Class B consumer limits.
Non-IC rated - Insulation must
be kept 3" from top and sides of
housing. RoHS Compliant. Title 24
Compliant with designated trims.
ARRA Compliant. Photometric
testing completed in accordance
with IES LM 79 standards. LED life
testing completed in accordance
with LM 80 standards.
LD6A20
6LW111
2000 Lumen LED
STEPREPEAT>
Warranty
6-Inch
5 year warranty.
Wide Beam Wall Wash
D ri v e r
New Construction
Combination 120-277V 0-10V or
120V trailing edge phase cut driver
provides flicker free dimming
from 100% to 10%. Optional
1% 0-10V, Fifth Light, DMX or
Lutron® Ecosystem. Driver can be
serviced from above or through the
aperture.
Qualified and Compliant. Refer to the
ENERGY STAR® Qualified Product List
and CEC (T24) Appliance Database
for listings.
TOP VIEW - NEW CONSTRUCTION
ENERGY DATA
Sound Rating: Class A standards
Operating Temperature: 40°C (104°F)
11-1/8"
[281mm]
2000 Lumen D010TE
(Values at non-dimming line voltage)
Minimum Starting Temperature: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
6-1/2"
[165.1mm]
Input Voltage: UNV (120V - 277V)
Power Factor: >0.90 (at nominal input 120-277 VAC & 100% of
Rated Output Power)
12-1/4" [312mm]
TOP VIEW - NEW CONSTRUCTION WITH BATTERY
Input Power: 31.5W
THD: <20%
120V Input Current: .27A
277V Input Current: .12A
Maximum Non-IC Ambient Continuous
5-5/8" [143mm]
Input Frequency: 50-60Hz
NEW CONSTRUCTION
6-3/8" [162mm]
7" [176mm]
Note: Max Opening 6-1/2" [165mm]
13-3/8"
[339mm]
16-13/16" [472mm]
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP110818
2013-11-20 15:38:35
LD6A20 6LW111
OR D ER ING INFOR M A TION
E X A M P L E : L D 6 A 2 0 D 010 T E E RW 6 A 2 0 8 3 5 6 LW 111 L I = 6 ” L E D W i d e Wa l l Wa s h , 2 0 0 0 L u m e n 3 , 5 0 0 K C o l o r w i t h U n i v e r s a l 1 2 0 - 2 7 7 V, 0 - 10 D r i v e r
Lumens1
Housing
LD6A=6” Aperture
LD6ACP=6” Aperture,
Chicago Plenum
20=2000
Lumens
D ri ve r
Options
D010TE=120-277V 0-10V 10%
Dimming or Trailing Edge 120V
Dimming
D010TR=120-277V 0-10V 10% Dimming
or Leading Edge 120V Dimming
D5LT=Fifth Light® (DALI) Dimming
1-100%
DE010=1 to 100% Dimming,
120-277V 50/60Hz, 0-10V
DL3=1 to 100% Dimming, 120-277V
Lutron® Hi-Lume, Ecosystem or 3 Wire
DLT=1 to 100% Dimming, 120V
Lutron® Hi-Lume Forward Phase
Dimming
DMX=DMX Dimming 1-100%
R e fl e c to r
Finish
6LW111=6” Wide Reflector,
Single Wall Wash, Self-flanged
6LW121=6” Wide Reflector,
Double Wall Wash, Self-flanged
6LW110=6” Wide Reflector,
Single Wall Wash, Polymer
Trim Ring
6LW120=6” Wide Reflector,
Double Wall Wash, Polymer
Trim Ring
LI=Specular Clear
H=Semi-Specular Clear
WMH=Warm Haze
G=Specular Gold
WH=Wheat
WHH=Wheat Haze
GP=Graphite
GPH=Graphite Haze
Pow e r M o d u l e
EMBOD=Bodine®
Emergency Module
with Remote Test
Switch3
CRI
8=80 CRI
9=90 CRI
ERW6A20=6”, 2000 Lumen
Module for Wide Beam
Reflector
Options
B=Specular Black
W=Gloss White
Color
27=2700° K
30=3000° K
35=3500° K
40=4000° K
27CP=2700° K, Chicago Plenum
30CP=3000° K, Chicago Plenum
35CP=3500° K, Chicago Plenum
40CP=4000° K, Chicago Plenum
A c c e s s o ri e s
Self-flanged Only
WF=White
Painted Flange
HB26=C-channel Bar Hanger,
26” Long, Pair
HB50=C-channel Bar Hanger,
50” Long, Pair
RMB22=Wood Joist Bar Hanger,
22” Long, Pair
H277=277 to 120V Step Down
Transformer, 300VA
H347=347 to 120V Step Down
Transformer, 75VA
H347200=347 to 120V Step Down
Transformer, 200VA Housings, Specify
Slope
TRM6=Metal Trim Ring, Specify Color2
TRR6=Rimless Trim Ring2
Notes: 1 Nominal Lumens will vary depending on selected color, driver and reflector finish.
2 Order trim with polymer trim ring (Consult specification sheet for color ordering information and options).
3 Not available with Chicago Plenum.
PHOTOM ETR IC S
CANDLEPOWER DISTRIBUTION
EMBOD MULTIPLIER
Downlight
Wall Washer
90º
90º
75º
Test Number
P98643
LD6A20D010TE ERW6A835 6LW111H
Lumens
2157
CCT
3500K
2000 Lumen= .31
75º
SINGLE UNIT FOOTCANDLES
500
MULTIPLE UNIT FOOTCANDLES
3' FROM WALL
60º
60º
1000
DD
1500
1'
2'
3'
4'
5'
6'
7'
8'
9'
10'
45º
45º
30º
15º
(Distance From Fixture Along
Wall)
15º
30º
LEGEND:
0-deg:
90-deg:
10
17
16
16
13
10
7
5
4
3
1'
2'
3'
8
15
14
14
12
9
7
5
4
3
4
9
10
10
9
8
6
4
3
2
1
5
6
6
6
5
5
4
3
2
2.5' FROM WALL
3' FROM WALL
(Spacing Between Fixtures)
(Spacing Between Fixtures)
2'
24
37
36
32
25
18
13
9
7
5
27
42
39
35
26
19
13
9
7
5
3'
24
37
36
32
25
18
13
9
7
5
CANDLEPOWER DISTRIBUTION
20
30
30
27
21
16
12
9
6
5
18
33
31
30
24
17
12
9
7
5
2'
20
30
30
27
21
16
12
9
6
5
14
27
27
26
23
18
13
10
7
6
3'
16
31
29
28
24
19
14
10
8
6
14
27
27
26
23
18
13
10
7
6
12
23
23
22
19
16
12
9
7
5
12
26
25
24
22
17
13
10
7
6
12
23
23
22
19
16
12
9
7
5
EMBOD MULTIPLIER
Downlight
Wall Washer
90º
90º
75º
Test Number
P97743
LD6A20D010TE ERW6A835 6LW111H
Lumens
2286
CCT
3500K
2000 Lumen= .31
75º
SINGLE UNIT FOOTCANDLES
550
MULTIPLE UNIT FOOTCANDLES
3' FROM WALL
60º
60º
1100
DD
1650
1'
2'
3'
4'
5'
6'
7'
8'
9'
10'
45º
45º
30º
15º
LEGEND:
0-deg:
90-deg:
(Distance From Fixture Along
Wall)
15º
30º
11
18
18
17
14
10
7
5
4
3
1'
2'
3'
9
15
16
15
13
10
7
5
4
3
4
10
10
11
10
8
6
5
4
3
2
5
5
6
6
6
5
4
3
2
2.5' FROM WALL
3' FROM WALL
(Spacing Between Fixtures)
(Spacing Between Fixtures)
2'
27
38
38
34
26
18
13
10
7
5
31
43
43
37
28
19
14
10
7
5
3'
27
38
38
34
26
18
13
10
7
5
23
31
31
28
22
16
12
9
7
5
22
33
34
32
25
18
13
10
7
5
2'
23
31
3
28
22
16
12
9
7
5
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
16
28
29
28
24
18
14
10
8
6
18
31
32
31
26
19
14
11
8
6
3'
16
28
29
28
24
18
14
10
8
6
13
23
24
23
20
16
13
10
7
6
14
26
27
26
23
18
14
10
8
6
13
23
24
23
20
16
13
10
7
6
ADP110818
2013-11-20 15:38:35
LD6A20 6LW111
PH OTOM ETR IC S
CCT Multiplication Factors
80 CRI
2000 Lumen
90 CRI
2000 Lumen
CCT [K]
Multiplier from
3500K
2700
3000
3500
4000
2700
3000
3500
4000
0.93
0.99
1.00
1.01
0.88
0.94
1.00
1.03
80 -> 90 CRI
0.79
0.80
0.84
0.85
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP110818
2013-11-20 15:38:35
R-5
Luminaire Type:
Catalog Number
(autopopulated):
L-2
AF
XX
X/XXTRT
6AR
LD
PCL
VOLT
Gotham Architectural Downlighting
Compact Fluorescent Downlights
6” AF
Open Reflector
Horizontal Lamp
Triple-Tube
FEATURES
OPTICAL SYSTEM
•
Self-flanged, semi-specular or matte-diffuse reflector. Patented Bounding
Ray™ Optical Principle design (U.S. Patent No. 5,800,050). Minimum flange
matches reflector finish.
•
Baffle/Cone: Semi-specular clear upper reflector. Microgroove baffle with white
painted flange or specular black cone with flange that matches cone finish.
MECHANICAL SYSTEM
•
16-gauge galvanized steel construction; maximum 7/8” ceiling thickness.
•
Telescopic mounting bars maximum of 32” and minimum of 15”, preinstalled,
4” vertical adjustment.
•
Toolless post-installation adjustments.
•
Junction box capacity: 8 (4 in, 4 out) 12AWG rated for 90°C.
ELECTRICAL SYSTEM
•
Horizontally mounted, positive-latch, thermoplastic socket.
•
Class P, thermally protected, high-power-factor electronic ballast mounted to the
junction box.
•
SIMPLY5™ technology available.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: AF 1/26TRT 6AR MVOLT
ORDERING INFORMATION
AF
X/XXTRT
Series
Wattage/Lamp
Aperture/Trim color
Finish
AF
1/13TRT
1/18TRT
1/26TRT
1/32TRT
1/42TRT
6AR
6PR
6WTR
6WR1
6MB1
6WB1
6BC1
(blank)
6AR
Clear
Pewter
Wheat
White painted
Black baffle
White baffle
Black cone
LD
LD
Semispecular
Mattediffuse
PCL
VOLT
XX
Lens type
Voltage
Ballast
(blank)
CGL
PCL
MVOLT2
120
277
347
(blank)
ECOS2, 4
T73
PPC
FOL
No lens
Clear glass lens
Clear polycarbonate
lens
Tempered prismatic
lens
Prismatic polycarbonate lens
Flat opal lens
ADEZ4, 5
ADZT2
S56
3
Electronic ballast
Lutron® EcoSystem® electronic dimming
ballast. Minimum dimming level 5%
Advance Mark 10® electronic dimming
ballast. Minimum dimming level 5%
Advance Mark 7® electronic dimming
ballast. Minimum dimming level 5%
SIMPLY5™ system ballast. Minimum
dimming level 3%
Options
EL5, 7
ELR5, 7
ELHL5, 7
ELRHL5, 7
GMF5
GLR5
TRW
TRBL
WLP
Emergency battery pack with integral test switch
Emergency battery pack with remote test switch
High-lumen-output emergency battery pack with integral test switch
High-lumen-output emergency battery pack with remote test switch
Single, slow-blow fuse
Single, fast-blow fuse
White painted flange (standard on MB and WB)
Black painted flange
With 3500 K lamp (shipped separately)
RRL8
CP9
BDP9, 10
HW
NEPP
WL
WRL11
TWS
CTA612
RELOC®-ready luminaire. Provides compatibility with Lithonia RELOC system. Access
above ceiling required.
Chicago plenum
Ballast disconnect plug
Hardwire for S5 system; replaces RELOC®
Interface for Sensor Switch® nLight® network with integral power supple. Refer to
TN-623-01.
Wet location; lens required
Wattage restriction label
Twist lock socket
Ceiling thickness adaptor (2-1/8” max thickness)
ACCESSORIES order as separate catalog numbers (shipped separately)
SCA6
Sloped ceiling adapter. Degree of slope must be specified (10D, 15D, 20D, 25D, 30D). Ex: SCA6 10D.
AF-6-Open-TRT
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
PAGE 1 OF 3
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 07/01/13. Specifications subject to change without notice.
6” AF
Open Reflector
Horizontal Lamp, Triple-Tube
DIMENSIONAL DATA
All dimensions are inches (centimeters) unless otherwise noted.
7 [16.4]
616
13 [40.2]
15 16
Aperture: 6-1/4 (15.9)
Ceiling Opening: 7-1/8 (18.1)
Overlap Trim: 7-1/2 (19.1)
Lens Recess: 2.0 (5.1)
14 [35.6]
DIMENSIONAL NOTES
•
Fixture height for 1/42TRT is 6-3/4 (17.1).
ELECTRICAL
ENERGY (Calculated in accordance with NEMA standard LE-5A)
LER.DOL
35
40
Annual*
Energy
Cost
$6.90
$5.96
Lamps
(1) 18W DTT
(1) 26W DTT
36
39
$6.75
$6.11
(2) 32W TRT
(2) 42W TRT
Lamp
Lumens
1200
1800
2400
3200
Ballast
Factor
1.00
1.00
0.98
1.00
Input
Wa t t s
20
28
36
46
* Comparative yearly lighting energy cost per 1000 lumens
NOTES
ORDERING NOTES
1.
2.
3.
4.
5.
6.
Not available with finishes.
Multi-volt electronic ballast capable of operating on any voltage from 120V
through 277V, 50 or 60 Hz.
For additional ballast types, refer to TECH-250.
Not available with 13W.
Available in 120V or 277V only.
SIMPLY5 includes 9’ S5 MLC RELOC wiring system (shipped separately).
Available in 120V or 277V only. Not available in 13W or 18W. See
simply5.net for more information.
7.
8.
9.
10.
11.
12.
For dimensional changes, refer to TECH-140.
For compatible RELOC systems, refer to TECH-110.
Not available with emergency options.
Meets codes that require in-fixture disconnect.
Must specify wattage. Ex.: WRL32
Not available with 42W.
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
AF-6-Open-TRT
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 07/01/13. Specifications subject to change without notice.
PAGE 2 OF 3
6” AF
Open Reflector
Horizontal Lamp, Triple-Tube
Distribution Data
AF 1/26TRT 6AR
60°
400
40°
Ave Lumens
719
681
64
678
193
690
315
539
332
302
228
39
52
7
8
3
3
1
1
0
Zone
Lumens % Lamp
0° - 30°
572.2
31.8
0° - 40°
904.5
50.2
0° - 60° 1184.1
65.8
0° - 90° 1195.2
66.4
90° - 180°
0.0
0.0
0° - 180° 1195.2 *66.4
*Efficiency
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
Illuminance: Single Luminaire 30” Above Floor
20%
70%
50% 30% 10%
77 77 77
71 69 68
65 62 60
60 56 53
55 51 48
50 46 43
46 42 39
43 38 35
40 35 32
37 32 29
34 30 27
80%
50% 30% 10%
79 79 79
73 71 69
66 63 61
61 57 54
56 51 48
51 46 43
47 42 39
43 38 35
40 35 32
37 32 29
34 30 27
RCR
0
5
15
25
35
45
55
65
75
85
90
200
0°
Coefficient of Utilization
(1) CF26TRT, 1800 LUMENS PER LAMP, 1.3 S/MH, TEST NO. LTL20419
80°
600
Output Data
50%
50% 30% 10%
74 74 74
68 67 66
63 61 59
58 55 52
53 50 47
49 45 42
45 41 38
42 38 35
39 35 32
36 32 29
34 30 27
AF 1/32TRT 6AR
10% beam 95.4°
Inital FC
Mounting Center
Height
Beam Diameter FC Diameter FC
2.4
12.1
11.9
7.0
23.8
8.0
1.3
16.5
6.4
9.5
12.8
10.0
0.8
20.9
4.0
12.0
8.0
12.0
0.5
25.3
2.7
14.6
5.4
14.0
0.4
29.7
2.0
17.1
3.9
16.0
(1) CF32TRT, 2400 LUMENS PER LAMP, 1.2 S/MH, TEST NO. LTL20325
0
5
15
25
35
45
55
65
75
85
90
80°
200
60°
400
600
40°
800
0°
Ave Lumens
916
888
83
846
241
847
386
637
395
362
273
45
60
9
9
3
3
1
1
0
Zone
Lumens % Lamp
0° - 30°
710.6
29.6
0° - 40° 1105.4
46.1
0° - 60° 1439.2
60.0
0° - 90° 1452.0
60.5
90° - 180°
0.0
0.0
0° - 180° 1452.0 *60.5
*Efficiency
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
20%
70%
50% 30% 10%
70 70 70
65 63 62
59 57 55
55 51 49
50 46 44
46 42 39
42 38 35
39 35 32
36 32 29
34 30 27
31 27 25
80%
50% 30% 10%
72 72 72
66 64 63
61 58 55
55 52 49
51 47 44
47 42 39
43 39 36
40 35 32
37 32 29
34 30 27
32 28 25
50%
50% 30% 10%
67 67 67
62 61 60
57 55 53
53 50 48
49 45 43
45 41 39
41 38 35
38 35 32
36 32 29
33 29 27
31 27 25
50% beam 10% beam 62.8°
95.2°
Inital FC
Mounting Center
Height
Beam Diameter FC Diameter FC
3.0
12.0
15.1
6.7
30.3
8.0
1.6
16.4
8.1
9.2
16.3
10.0
1.0
20.8
5.1
11.6
10.1
12.0
0.7
25.2
3.5
14.1
6.9
14.0
0.5
29.6
2.5
16.5
5.0
16.0
20°
AF 1/42TRT 6AR
(1) CF42DT/E/IN/835, 3200 LUMENS PER LAMP, 1.3 S/MH, TEST NO. LTL9521
From 0°
cp.
Lumens
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
90°
1058
1135
1136
1043
774
622
26
2
1
0
0
107
323
487
473
374
41
2
1
0
Zone
Lumens %lamp
0°-30° 916.8
0°-40° 1390.1
0°-60° 1805.1
0°-90° 1808.4
90°-180° 0.0
0°-180° 1808.4
*Efficiency
28.6
43.4
56.4
56.5
0.0
56.5*
ρf
20%
ρc
80%
70%
50%
ρw 50% 30% 50% 30% 50% 30%
1
2
3
4
5
6
7
8
9
10
62
57
52
48
44
41
38
35
32
30
60
54
49
44
40
37
34
31
28
26
61
56
51
47
43
40
37
34
32
30
59
53
48
44
40
36
33
31
28
26
58
54
50
46
42
39
36
34
31
29
57
52
47
43
39
36
33
30
28
26
PHOTOMETRY NOTES
•
•
•
50% beam 64.8°
20°
RCR
PHOTOMETRY
Distribution Curve
Tested to current IES and NEMA standards under stabilized laboratory conditions.
Actual performance may differ as a result of end-user environment and application.
Consult factory or IES file for microgroove baffle, black cone or other photometric reports.
AF-6-Open-TRT
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
PAGE 3 OF 3
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 07/01/13. Specifications subject to change without notice.
Initial fc
Mount at beam
height center
8'
10'
12'
14'
16'
35.0
18.8
11.7
8.0
5.8
10%
50%
beam angle 62.5° beam angle 94.2°
fc at
fc at
Beam beam
Beam
beam
diameter edge
diameter edge
6.7
9.1
11.5
14.0
16.4
17.5
9.4
5.9
4.0
2.9
11.8
16.1
20.4
24.7
29.0
3.5
1.9
1.2
0.8
0.6
PORTFOLIO TM
D ES C R IPTION
6 inch LED square recessed downlight with 50° cut off specially designed
for LED technology. Two-stage reflector system produces smooth
distribution with excellent light control and low aperture brightness.
Lumen packages include 1000 and 1500 delivered lumens with color
temperatures of 2700K, 3000K, 3500K, 4000K. Suitable for commercial
construction and exceeds high efficacy requirements (with designated
trims) for Title 24. Energy Star qualified.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Lo w e r P a r a b o l i c R e fl e c tor
The rma l
E n viron mental
Parabolic aluminum lower reflector
in combination with a lensed upper
optical chamber provides superior
lumen output with minimal source
brightness. Available in all Portfolio
Alzak® finishes.
Extruded aluminum heat sink
conducts heat away from the LED
module for improved performance
and longer life.
Fixture should not be operated in
ambient temperatures above 40° C.
L ED
Accepts 1/2" EMT, C channel
and bar hangers and adjusts 5"
vertically from above and below
the ceiling.
LED system contains a plurality
of high brightness white LED’s
combined with a high reflectance
upper reflector and convex
transitional lens producing even
distribution with no pixilation.
Rated for 50,000 hours at 70%
lumen maintenance. Auto
resetting, thermally protected,
LED’s are turned off when safe
operating temperatures are
exceeded. Color variation within
3-step MacAdam ellipses. Flexible
disconnect allows for tool-less
replacement of LED engine from
below ceiling. Available in 80 or
90 CRI.
Ju n c t i o n B o x
D ri v e r
(4) 1/2" and (2) 3/4" trade size pry
outs positioned to allow straight
conduit runs. Listed for (8) #12
AWG (four in, four out) 90°C
conductors and feed thru branch
wiring.
Combination 120-277V 0-10V or
120V trailing edge phase cut driver
provides flicker free dimming
from 100% to 10%. Optional
1% 0-10V, Fifth Light, DMX or
Lutron® Ecosystem. Driver can be
serviced from above or through the
aperture.
Trim Retention
Reflector is retained with two
torsion springs holding the flange
tightly to the finished ceiling
surface.
Pla s t e r F r a m e / Col l a r
Galvanized steel plaster frame with
adjustable collar adjusts for up to
2" thick ceilings and rotates+/- 7.5°.
U n i v e r s a l M o u n t ing Bra c ke t
Cod e Co mplian ce
Thermally protected and cULus
listed for protected wet locations.
Optional City of Chicago
environmental air (CCEA) marking
for plenum applications. EMI/
RFI emissions per FCC 47CFR
Part 18 Class B consumer limits.
Non-IC rated - Insulation must
be kept 3" from top and sides of
housing. RoHS Compliant. Title 24
Compliant with designated trims.
ARRA Compliant. Photometric
testing completed in accordance
with IES LM 79 standards. LED life
testing completed in accordance
with LM 80 standards.
LDSQ6A10
LDSQ6A15
6LSQ
1000 Lumen LED
1500 Lumen LED
STEPREPEAT>
Warranty
5 year warranty.
6-Inch
Square Downlight
Qualified and Compliant. Refer to the
ENERGY STAR® Qualified Product List
and CEC (T24) Appliance Database
for listings.
TOP VIEW - NEW CONSTRUCTION
ENERGY DATA
Sound Rating: Class A standards
9-13/16"
[249mm]
1500 Lumen D010TE
(Values at non-dimming line voltage)
Minimum Starting Temperature: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
Input Voltage: UNV (120V - 277V)
Power Factor: >0.90 (at nominal input 120/277 VAC & 100% of
Rated Output Power)
10-3/16" [259mm]
5-5/8"
[143mm]
TOP VIEW - NEW CONSTRUCTION WITH BATTERY
Input Power: 22.4W
THD: <20%
120V Input Current: .12A
277V Input Current: .09A
Maximum Non-IC Ambient Continuous
Input Frequency: 50-60Hz
1000 Lumen D010TE
(Values at non-dimming line voltage)
NEW CONSTRUCTION
Minimum Starting Temperature: -30°C (-22°F)
4-1/2" [115mm]
13-7/8"
[352mm]
5-1/8" [130mm]
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
Input Voltage: UNV (120V - 277V)
Power Factor: >0.90 (at nominal input 120/277 VAC & 100% of
Rated Output Power)
5-11/16" [144mm]
Note: Max Opening 4-3/8" [111mm]
Input Power: 14.1W
THD: <20%
120V Input Current: .12A
277V Input Current: .06A
Maximum Non-IC Ambient Continuous
16" [406mm]
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
Input Frequency: 50-60Hz
ADP110844
2013-11-20 15:38:35
LDSQ6A10 LDSQ6A15 6LSQ
ORDER ING INFOR M A TION
EXAMPLE: LDSQ6A15D010TE ESQ615835 6LSQ0LI=6” Square LED Downlight, 1500 Lumen, 3,50 0 K Color with Universal 120 - 277V, 0 - 10 Driver
Lumens1
Housing
LDSQ6A=6” Square
Aperture
LDSQ6ACP= 6”
Square Aperture,
Chicago Plenum
10=1000 Lumens
15=1500 Lumens
D ri v e r
Options
D010TE=120-277V 0-10V 10%
Dimming or Trailing Edge 120V
Dimming
D010TR=120-277V 0-10V 10% Dimming
or Leading Edge 120V Dimming
D5LT=Fifth Light® (DALI) Dimming
1-100%
DE010=1 to 100% Dimming,
120-277V 50/60Hz, 0-10V
DL3=1 to 100% Dimming, 120-277V
Lutron® Hi-Lume, Ecosystem or 3 Wire
DLT=1 to 100% Dimming, 120V
Lutron® Hi-Lume Forward Phase
Dimming
DMX=DMX Dimming 1-100%
EMBOD=Bodine®
Emergency Module
with Remote Test
Switch3
R e fl e c to r
Finish
CRI
ESQ6A10=6”, 1000 Lumen
Module
ESQ6A15=6”, 1500 Lumen
Module
8=80 CR
9=90 CRI
Options
IP66=IP66 Gasket
LI=Specular Clear
H=Semi-Specular Clear
WMH=Warm Haze
G=Specular Gold
WH=Wheat
WHH=Wheat Haze
GP=Graphite
GPH=Graphite Haze
B=Specular Black
W=Gloss White
6LSQ0=6” Square Reflector
Lens Assembly, Polymer Trim
Ring
6LSQ1=6” Square Reflector
Lens Assembly, Self-flanged
Pow e r M o d u l e
Self-flanged Only
WF=White
Painted Flange
Color
27=2700° K
30=3000° K
35=3500° K
40=4000° K
27CP=2700° K, Chicago Plenum
30CP=3000° K, Chicago plenum
35CP=3500° K, Chicago Plenum
40CP=4000° K, Chiago Plenum
A c c e s s o ri e s
H277=277 to 120V Step Down
Transformer, 300VA
H347=347 to 120V Step Down
Transformer, 75VA
H347200=347 to 120V Step
Down Transformer, 200VA
HB26=C-channel Bar Hanger,
26” Long, Pair
HB50=C-channel Bar Hanger,
50” Long, Pair
RMB22=Wood Joist Bar Hanger,
22” Long Pair
Notes: 1 Nominal Lumens will vary depending on selected color, driver and reflector finish.
2 Order trim with polymer trim ring (Consult specification sheet for color ordering information and options).
3 Not available with Chicago Plenum.
PH OTOM ETR IC S
CANDELA TABLE
CANDLEPOWER DISTRIBUTION
Downlight
90º
75º
600
60º
1200
45º
1800
15º
30º
Test Number
P97523
LDSQ6A15D010TE ESQ6A835 6LSQ1LI
Lumens
1544
Efficacy
70.8 Lm/W
Watts
21.8
CCT
3500K
SC
0.93
CONE OF LIGHT
Distance
Fixture to
Lighted Plane
5'5"
7'
8'
9'
10'
12'
Initial
Footcandles
at Nadir
57
35
27
21
17
12
Beam
Diameter
5.0
6.4
7.4
8.2
9.2
11.0
Degrees
Vertical
0
5
15
25
35
45
55
Candela
1724
1762
1555
1163
384
63
12
65
4
75
1
85
1
90
0
ZONAL LUMEN SUMMARY
Zone
0-30
0-40
0-60
0-90
90-180
0-180
Lumens
1115
1445
1538
1544
0
1544
%Fixture
72.2
93.6
99.6
100
0
100
LUMINANCE
Average Candella
Degrees
45
55
65
75
85
Average 0°
Luminance
3812
893
438
183
0
EMBOD MULTIPLIER
1000 Lumen= .64
1500 Lumen= .45
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP110844
2013-11-20 15:38:35
LDSQ6A10 LDSQ6A15 6LSQ
PHOTOM ETR IC S
CCT Multiplication Factors
1000 Lumen
80 CRI
1500 Lumen
1000 Lumen
90 CRI
1500 Lumen
CCT [K]
Multiplier from
3500K
2700
3000
3500
4000
2700
3000
3500
4000
0.93
0.99
1.00
1.01
0.93
0.99
1.00
1.01
2700
3000
3500
4000
2700
3000
3500
4000
0.88
0.95
1.00
1.03
0.88
0.94
1.00
1.03
80 -> 90 CRI
0.79
0.80
0.84
0.86
0.79
0.79
0.84
0.86
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP110844
2013-11-20 15:38:35
R-7
%5,*+7
Application
Installation
Mounting
Accent and pathway lighting
Outdoor or indoor recessed spotlights
With outer casing WC0201;
spring-loaded ferrule accessory WG0300
for installation on panels, plasterboard
Material
Body and ferrule in Stainless Steel AISI316L, outer
ferrule thickness , tempered glassStainless
Finishes available
Steel
N° and type of LED
1 power LED
Nom. power consumption 1W; 2W
Power supply
350mA; 500mA
Power supply unit
Not included
In series; wired with a h neoprene cable
Connection
Total Delivered Lumens
50 lm (3000K 350mA)
Optics
Diffused; L; M; S; W
LED colour
White: Warm White (2700K); Warm White (3000K);
White (4000K); Cool White (5000K);
Blue; Green; Red
IP
68
IK
08
150°
% - Diffused
150°
90°
90°
60°
60°
cd/klm 30°
max 850
150°
30°
---- C0 - C180
0°
2500
120°
90°
Stainless Steel
OPTIC
% - Diffused
- - 40°
. - 20°
T - 10°
8 - Elliptical 10°x45°
2
60°
LED COLOR
60°
cd/klm 30°
max 2138
0°
150°
7500
30°
---- C0 - C180
1500
90°
90°
Ø
60°
60°
150°
30°
---- C0 - C180
0°
30000
Ø
6000
90°
60°
60°
cd/klm 30°
max 25060
150°
30°
---- C0 - C180
0°
7500
8(
Ferrule for spring mounting
1500
90°
60°
Ø Job Name:
cd/klm 30°
max 6024
60°
30°
0°
5
3
2
7
4
1
'D max (3000K)
Ø (GU)
8
8
1
'D max (3000K)
H (GU)
Ø GU)
8
8
4
'D max (3000K)
H (GU)
Ø (••••
)
0
0
8
8
1
4
1
'D max (3000K)
120°
90°
8- Elliptical 10°x45°
150°
120°
8
H (GU)
120°
90°
8
4 - 10°
150°
120°
ACCESSORIES
120°
cd/klm 30°
max 5492
Ø
. - 20°
150°
120°
OUTER CASING
8$
Ø (GU)
120°
500
- Cool White 5000K
- Blue
- Green
- Red
- Warm White 3000K
- Natural White 4000K
' - Warm White 2700K
H (GU)
- - 40°
150°
90°
$#@@BJ
'D max (3000K)
120°
200
Ø
2W - 500mA
1000
120°
---- C0 - C180
---- C90 - C270
Ø (GU)
8
8
H (GU)
Ø (GU)
1 1 3
6
Fixture Type:
3BUFE*16
TBMFT!EFTJHOQMBODPN
XXXEFTJHOQMBODPN
¥$PQZSJHIU%FTJHOQMBO-JHIUJOH*OD
5SFOUPO"WF
'SFODIUPXO/+
5FM
'BY
&DWDORJ1XPEHU
7\SH
3URMHFW
/('&(,/,1*5(&(66
3ULPXV
8721-RD-SV
6SHFLILFDWLRQ
8721-RD-BK
8721-SQ-BK
‡7ULP'LDPHWHU
‡&HLOLQJ&XWRXW
‡0D[LPXP&HLOLQJ7KLFNQHVV
‡0LQLPXP&HLOLQJ&OHDUDQFH
‡3DLURIPRXQWLQJVSULQJVLQFOXGHG
‡1RKRXVLQJUHTXLUHGIRUQRQLQVXODWHGFHLOLQJLQVWDOODWLRQ
‡:SRZHUFRQVXPSWLRQ
‡/XPHQVOP3DFNDJH
‡9P$:'LPPDEOH'ULYHULQFOXGHGLQUHPRWHMER[
‡9LQSXW
‡&RPSDWLEOHZLWK(/9GLPPHUV
‡5HPRWH-ER[
‡RIIOH[LEOHFRQGXLWOLQNVEHWZHHQGULYHUMER[DQGIL[WXUH6HH)LJXUH
‡&RQGXLWFRQQHFWRULVLQFOXGHGIRUHDV\LVQWDOODWLRQ6HH)LJXUH
‡'XDONQRFNRXWVIRUIHHGWKUXVLQJOHIL[WXUHGLPPLQJZLULQJDFFHVV6HH)LJXUH
&RQGXLW&RQQHFWRU
RI)OH[LEOH&RQGXLW
)LJXUH
)LJXUH
)LJXUH
2UGHULQJ,QIRUPDWLRQ
&DWDORJ1R
7ULP2SWLRQV
5'5RXQG
646TXDUH
3ULPXV)L[HG'RZQOLJKW/('&HLOLQJ5HFHVV
6.8
-
+DUGZDUH)LQLVK
-
/('&RORU
696LOYHU
%.%ODFN
:+:KLWH
%=%URQ]H
-
,QSXW9ROWDJH
9
9
:.:DUP:KLWH
-
-
$OOIL[WXUHVDQGOLJKWLQJV\VWHPVPXVWEHXVHGZLWK3ULPDWUDQVIRUPHUGULYHUDQGRUEDOODVWWRFRPSO\ZLWKF8/F(7/OLVWLQJRUDOOZDUUDQWLHVDUHYRLG
3DJHRI
3ULPD/LJKWLQJ&RUS0DUTXDUGW$YH6DQWD)H6SULQJV&$3KRQH7ROO)UHH)D[
ZZZSULPDOLJKWLQJFRP‹3ULPD/LJKWLQJ&RUS$OOULJKWV5HVHUYHG6SHFLILFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH
0-06-SSP-2-WM-NR-NI-35K-HR#-VOLT-DRV
luxrail
TM
IP 65
LM 79
S-5
LM
80
INTERIOR/EXTERIOR
APPLICATIONS
Application
ANSI and ADA compliant, luxrail is an indoor/outdoor LED-based handrail that delivers functional
illumination. Three intensities may be specified: standard output, mid output, and high output.
The standard light output version delivers illuminance levels appropriate for exterior applications
(2 footcandles at grade) as well as for dark interior environments with low ambient illumination
levels (e.g., themed environments, theatres and residential areas). The high output version delivers
illuminance levels applicable to interior environments – providing in excess of 10 footcandles along
the path of egress (ANSI required for stair treads). Independent photometric test reports and IES
Format data are available at www.iolighting.com.
luxrail’s standard handrail gripping surfaces are circular in cross section and meet 2004
ADAAG (Americans with Disability Act Accessibility Guidelines). Patented optical assemblies
deliver 10˚, 25˚, and 55˚ beam spreads, as well as an asymmetric option. The 25˚ and 55˚ beam
patterns are most suitable for illuminating pathways, while the 10˚ beam spread offers accent
lighting for optional glass or stainless steel cable railing infills. Reference page 54 of this catalog
for information regarding infill options. Projected average rated life is 50,000 hours at 70% of lamp
lumen output. Contact factory for IES LM-80 compliance. To ensure proper performance,
architectural details should allow for ventilation and air flow around the fixture. Ambient
temperature surrounding the fixture shall not exceed 122˚F (50˚C).
1-year warranty
Light Output
Three luminous intensities are available for white light. All values below represent the initial raw lumens
of the LED. IES format photometry of Lighting Facts labels represent actual light output measured in
lumens and candle power. Light output losses include optical, thermal and power supply inefficiencies.
IES LM-79 format files may be obtained from the factory or downloaded from www.iolighting.com.
Results are typical measurements.
Dimensions
2700K
3000K
3500K
4000K
5000K
1.66"
(42.2mm)
1.90"
(48.3mm)
White:
White:
White:
White:
White:
Standard Output
72 lms/ft
81 lms/ft
83 lms/ft
88 lms/ft
88 lms/ft
Mid Output
181 lms/ft
203 lms/ft
206 lms/ft
219 lms/ft
219 lms/ft
High Output
253 lms/ft
284 lms/ft
289 lms/ft
307 lms/ft
307 lms/ft
Construction
luxrail may be post mounted or wall mounted. io recommends installation be completed by a
qualified handrail installer. Mounting hardware (post or wall) is typically required up to 5' O.C.,
depending on the handrail alloy. Final post and wall bracket spacing must be determined by a
licensed architect or structural engineer. luxrail is available in stainless steel and aluminum. Vandal
resistant access chamber allows units to be removed for maintenance purposes.
All handrail component parts are engineered for quick installation. Field welding or cutting is
typically not required. All parts are prefabricated to field dimensions and are assembled in the field
with mechanical connection or epoxy. Contact io Lighting for recommended handrail installers.
The LED light fixture inside the caprail is UL Listed for wet locations. Handrail alloy options include
stainless steel and aluminum. Contact factory for maintenance guidelines.
Electrical
luxrail houses a low voltage LED-based light fixture that is integrated into the underside
of the handrail. 24 volt 100 watt power supplies are provided as a standard. For detailed
information regarding daisy chain limitations, remote distance limitations, power supply
options, and dimming options consult the io website (www.iolighting.com) or an
io representative.
Driver Remote Distance
7'-0" (2.1m) w/22 AWG
18'-0" (5.5m) w/18 AWG
46'-0" (14.0m) w/14 AWG
71'-0" (21.6m) w/12 AWG
Dimming modules must be specified separately. For detailed information download the power
supply specification sheet from www.iolighting.com.
Power Consumption
Power consumption does not include power supply losses.
Label references 30" luxrail fixture with a 55˚ beam spread in
High Output 3000K. Lighting Facts for additional beam spreads
and light output levels may be obtained from io Lighting.
Standard Output
1.02 w/ft
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089
T
Mid Output
2.54 w/ft
High Output
3.81 w/ft
847.777.3900 F 847.777.3901 E info@iolighting.com
W iolighting.com
luxrail
TM
BEAM SPREAD OPTIONS
WALL MOUNT DETAILS*
22 AWG, 300v power cord
10˚
25˚
55˚
Power cord for secondary feed.
Wire gauge as required for remote driver.
ASYMMETRIC
luxrail light fixture
Locking Bracket
Mount
22 AWG, 300v
power cord
Wireway
LIGHT OUTPUT - 55 DEGREE WARM WHITE
To remote driver
Snap-Cover Flange
Light Output / Distributions
Tube Extension, as
needed for conduit
connection
Snap Base
42"
(1.06m)
36"
(.9m)
.24 .42 .81 1.78 5.5
25.0 8.1 3.7 1.9 1.1
.29 .50 .90 2.02 5.1
23.0 9.2 4.1 2.3 1.3
5' 4' 3' 2' 1'
1' 2' 3' 4' 5'
5' 4' 3' 2' 1'
1' 2' 3' 4' 5'
* Wall mounted luxrail
may be mounted to new or
existing guardrail (by others).
Post and wall bracket
spacing must be determined
by a licensed architect or
structural engineer.
io Lighting recommends a
qualified handrail installer be on
site during install.
LIGHT OUTPUT CONVERSION TABLE
Standard
Output
Mid
Output
High
Output
2700K White
0.25(1)
0.69(1)
0.94(1)
3000K White
0.27
(1)
(1)
1.00(1)
3500K White
0.29(1)
0.78(1)
1.06(1)
4000K White
0.29(1)
0.78(1)
1.06(1)
5000K White
(1)
(1)
1.19(1)
Calculation assumes 12'0" run length. All footcandle values are initial.
POST MOUNT APPLICATION
60"
(1.5m)
Note: 4' to 5' typical
34"
(0.86m)
0.32
0.73
0.87
Note: Visit www.iolighting.com or contact an
io representative for IES format photometrics.
RED
GREEN
BLUE
AMBER
0.53(2)
0.51(2)
0.30(2)
0.51(2)
Mounting / Infill Options
Note: Will depend on alloy and diameter specifications.
WM (wall mount intermediate)
PM (post mounted)
Glass infill
Stainless steel cable infill
(glass provided by others)
(only available on flat surfaces)
0 - 06 - SSP - 2 - WM - NR - NI - 35K - HR# - VOLT - DRV
Order Code
0
1.
06
2.
SSS
SSP
CAA
ALLOY / FINISH
Stainless steel satin
Stainless steel polished
Clear anodized aluminum
3.
1
SIZE
1.66" O.D. (11⁄4" pipe size)
(available in SS only)
1.90" O.D. (11⁄2" pipe size)
(available for SS & CAA)
2
4.
PMC
PMW
PMS
WM
Footnotes
06
io
1
PRODUCT FAMILY
luxrail
MOUNTING
Post mount concrete
Post mount wood
Post mount stone
Wall or guard rail mounted
2
5.
AC
GL
C
NR
3
4
INFILL
Stainless steel cable (5)
Glass (provided by others)
Custom
Not required
5
6.
LIGHT DISTRIBUTION
10
10 Degree
25
25 Degree
55
55 Degree
ASYM Asymmetric
NI
Handrail only (not illuminated)
7.
27K
3K
35K
4K
5K
LIGHT COLOR
Warm White
Warm White (3)
Warm White
Warm White
Cool White (3)
7
Warm White
Warm White (3)
Warm White
Warm White
Cool White (3)
Warm White
Warm White (3)
Warm White
Warm White
Cool White (3)
Red(4)
Green(4)
Blue(4)
Amber(4)
Custom Color(7)
8
9.
1
2
3
4
5
9
10
VOLTAGE / DIMMING
120v
277v
120v w/dim
277v w/dim
Other (International voltage)
11
10. SPECIFY DRIVER / DIMMING(1)
Note: If not specified otherwise,
io will supply 100 watt drivers.
Download Power Supply specification
sheet from www.iolighting.com.
11.
CE
Available upon request.
8.
GB2
GB3
GB4
GB5
HR
LENGTH
Grab Bar 2' nominal(7)
Grab Bar 3' nominal(7)
Grab Bar 4' nominal(7)
Grab Bar 5' nominal(7)
Hand Rail length in Feet / Inches
(provide overall length
of each handrail section)(2)(6)
HR C
Hand Rail Curved length in
Feet / Inches (provide overall
length of each handrail section)(2)(6)
1. Power Supply Specification Sheet may be downloaded from www.iolighting.com.
2. Each handrail application will be custom to accommodate varying field conditions and
design requirements. Shop drawings will be required to manage specifics of each handrail section.
3. White light variance between LEDs is equal to or better than 3-step MacAdam Binning.
4. Only available in 5.08 w/ft.
5. Stainless Steel cable available for flat surfaces only.
6. Detailed elevation drawings of handrail section are required for quote.
7. Non-standard color temperature and CRI are available. Consult factory for availability.
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089
6
27KMO
3KMO
35KMO
4KMO
5KMO
27KHO
3KHO
35KHO
4KHO
5KHO
R
G
B
A
CC
T
847.777.3900 F 847.777.3901 E info@iolighting.com
luxrail applications
youtube.com/iolighting
W iolighting.com
S-6
GROOVE
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
GROOVE Monopoint
Page 1 of 1
TYPE:
1. Style:
Direct (GRV)
2. Downlight Option:
Suspended with A/C Cable (P)
Suspended with 1/2” stem (ST)
Surface Mount (S)
3. Downlight Option:
**37 Watt MR16 (MR16)
20 Watt CMH-MR16 (GX1020)
39 Watt CMH-MR16 (GX1039)
39 Watt CDM/PAR20 (CDMPAR20)
39 Watt CDM/PAR30 (CDMPAR30)
*CZEN7: Citizen® 1 x 7.6W Watt LED Module, 820LM, 80CRI, 3000K (CZEN7)
*CZEN7DIM: Citizen® 1 x 7.6W Watt LED Module, TRIAC Dimming, 820LM, 80CRI, 3000K (CZEN7DIM)
*CZEN7-H: Citizen® 1 x 7.6W Watt LED Module, Lutron® A Series Dimming, 820LM, 80CRI, 3000K (CZEN7-H)
*CZEN10: Citizen® 1 x 10W Watt LED Module, 1000LM, 80CRI, 3000K (CZEN10)
*CZEN10DIM: Citizen® 1 x 10W Watt LED Module, TRIAC Dimming, 1000LM, 80CRI, 3000K (CZEN10DIM)
*CZEN10-H: Citizen® 1 x 10W Watt LED Module, Lutron® Hilume A Series Dimming, 1000LM, 80CRI, 3000K (CZEN10-H)
*CZEN15: Citizen® 1 x 15W Watt LED Module, 1050LM, 80CRI, 3000K (CZEN15)
*CZEN15-0-10V: Citizen® 1 x 15W Watt LED Module, 0-10V Dimming, 1050LM, 80CRI, 3000K (CZEN15-0-10V)
*CZEN15-H: Citizen® 1 x 15W Watt LED Module, Lutron® A Series Dimming, 1050LM, 80CRI, 3000K (CZEN15-H)
*CZEN20: Citizen® 1 x 20W Watt LED Module, 1200LM, 80CRI, 3000K (CZEN20)
*CZEN20-0-10V: Citizen® 1 x 20W Watt LED Module, 0-10V Dimming, 1200LM, 80CRI, 3000K (CZEN20-0-10V)
**for LED MR16, retrofit lamp only
*No Accessory Options Available
4. Voltage:
120 - 120 volt (120)
277 - 277 volt (277)
**347 - 347 volt
**Not available in dimming
6"
1
5. Finish:
4 2"
* AL (Anodized aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your
*AL is standard on all monopoint products
6. Accessory Option:
*Hex - Hexcell Louvers (HEX)
*SNOOT - Snoot (SNT)
*SOL - Solite Lens (SOL)
*LSS - Linear Spread Lens (LSS)
*All louvers for MR16 Halogen ONLY
Design Specifications
Construction
Single piece machined aluminum housing.
Electrical Details
All Ballasts are Electronic <10% THD
Class P electronic ballasts
All transformers are electronic low voltage.
ETL Listed
Indoor Location Only
Emergency
Remote Emergency Ballast
Finish
AL is brushed clear and anodized aluminum - standard.
Powder Coat options are available. Consult factory.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
GROOVE Monopoint
Page 2 of 2
TYPE:
Standard: Pendant Wire Mounting with adjustable aircraft cable suspension
*4-1/2” dia. canopy
to cover 4-O Octagon Junction box Bullet Aircraft cable
suspension.
*Adjustable GripLock cable suspension
*8FT suspension hardware is standard on all
ALW suspended fixtures
Option: Seismic Bracing
Aircraft cable can
mount on side of
channel to seismic
anchoring.
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
SPECIFICATION SHEET
MINILINEAR WALK OVER
S.549
COLOR
STAINLESS FRONT TRIM
-
120
VOLTAGE
- 19
FINISH
The MINILINEAR WALK OVER is a range of in-ground
luminaires that have been designed and studied to create a
luminous strip of lighting with reduced dimensions ideal for
highlighting surface pathways with a soft and even light
distribution.
LAMPING: 9.6W LED (120V ONLY)
(SEE COLOR OPTIONS)
PROJECT NAME:
TYPE: S-7
LAST UPDATE: FEBRUARY 24th, 2009
9.6W LED
(SEE COLOR OPTION)
STAINLESS STEEL ALLEN
HEAD SCREW (X2 TYP.)
2-3/4"
(70mm)
STAINLESS STEEL
FRONT TRIM
19-7/16"
(493mm)
TOP VIEW
CONCRETE
30°
STAINLESS STEEL
RECESSING BOX
GROUND
SURFACE
1/8"
(3mm)
3-3/4"
(95mm)
2-1/4"
(57mm)
19-3/16"
(487mm)
INSURE
8" OF
GRAVEL
FOR DRAINAGE
SIDE VIEW
FRONT VIEW
WITH INTEGRAL
ELECTRONIC
POWER SUPPLY
ACCESSORY
1100 LBS MAX
WALK OVER LOAD
COLOR
S.5495.19 9.6W WHITE LED
WALL MOUNTING BRACKET
S.5496.19 9.6W BLUE LED
S.5480
METAL FINISH
5455 de Gaspé
suite 100, Montréal (Québec)
Canada H2T 3B3
P.: 514.523.1339 F.: 514.525.6107
19 - STAINLESS STEEL
MINILINEAR WALK OVER
STAINLESS FRONT TRIM
Welcome to Prima Lighting! DEL 406 - 24V 59406 Dimmable LED
Page 1 of 2
T-1
Enter search keywords here
H om e
Rep Finder
Products
Photo G allery
FAQ
Track Shipm ent
M y Account
C ontactU s
H om e > Products > 120V P-Track System > Step 1:Choose Fixtures > Interchangeable Track H eads
C ATEG O RIES
D EL 406 -24V 59406 D IM M ABLE LED
Interchangeable Pendants
Interchangeable Track H eads
System Code
120V P-Track System
(20) Low Voltage FIT System Fixtures
Step 1:Choose Fixtures
Lum en Style
Exclusive For120V P-Track
System
LD
Interchangeable Pendants
Catalog N o.
Interchangeable Track
H eads
59406
D escription
LED D im m able Track H ead Lum en
D escription
D el406 Adjustable CylinderD im m able LED
SpotTrack H ead w ith 14.7W
Step 2:Choose O ptical
Accessories
H ardw are Finish
D escription
Step 3:Choose P-Track
BK
Black Finish
Step 4:Choose P-Track
Connector
SV
SilverFinish
Suspension Code
Step 5:Choose P-Track
Support
D escription
STD
Standard w ithoutStem
6 Inch
6"Stem
12 Inch
12"Stem
18 Inch
18"Stem
24 Inch
24"Stem
30 Inch
30"Stem
Low Voltage FIT IISystem
36 Inch
36"Stem
Low Voltage Cable System
40 Inch
40"Stem
Low Voltage M ini-Alum inum
RailSystem s
48 Inch
48"Stem
Step 6:Choose P-Track Pow er
Feed
20-LD -59406-AL
40-LD -59406-BK
Low Voltage M onorailSystem
Low Voltage FIT ISystem
Lam p Type
Low Voltage M ini-Transparent
RailSystem s
D escription
LED -N
LED 4000K N aturalW hite M odule Included
LED -W
LED 3000K W arm W hite M odule Included
12V Picture Lights
Lam p Beam Angle
LED D isplay Fixtures
H igh Pow erLED W allW asher
Bar
45
D escription
45 D egree
20 -LD -59406 (D )-SV -6 -N -45
24V Flush D irectIndoorLED
Strip
M ustO rderAlert
120V Flush D irectIndoorLED
Strip
120V LED U nderCabinetTask
Light
M onopointCanopy Selections
M ultipointCanopy Selection
LED Ceiling Recess Trim s W ith
Rough-In H ousing
http://www.primalighting.com/product.php?pid=970&pcid=189
12/19/2013
Welcome to Prima Lighting! DEL 406 - 24V 59406 Dimmable LED
LED Ceiling Recess Trim s
W ithoutH ousing
Page 2 of 2
39-CV100D -24
LED CabinetRecess Trim
LED W allRecess Fixtures
RELATED PRO D U C TS
LED Step Recess Light
12V Interchangeable Recess
Trim s
12V M iniature RecessTrim sFor
Ceiling orCabinet
W allSconces
Transform ers& LED D rivers
Lam ps & O pticalAccessories
D EL 406 -12V 59406 N on-
M ulti-SpotCeiling Fixture
D im m able LED
© C opyright2012.Prim a Lighting.AllRightsReserved.
H om e | Rep Finder | Register | Products | D esign YourLighting System | Photo G allery | FAQ | Track Shipm ent | M y Account | C ontactU s
http://www.primalighting.com/product.php?pid=970&pcid=189
12/19/2013
W-1
LIGHTPLANE ROUND
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE ROUND - Wall
Page 1 of 1
TYPE:
Specification and Ordering Information:
1. Style:
LPRWF - Vertical Wall Mount, Bottom Canopy - Forward (LPRWF)
LPRWB - Vertical Wall Mount, Bottom Canopy - Backward (LPRWB)
LPRVF - Horizontal Wall Mount, Central Canopy - Forward Facing (LPRV)
2. Overall Run Length:
Individual (2’,3’,4’,5’,6’,7’,8’)
3. Lamping
FSO - Fluorescent T5- Standard Output (FSO)
FHO - Fluorescent T5- High Output (FHO)
LEDW5 - LED White 3000K (LEDW5)
*LEDW10 - LED White 3000K, Remoted Driver(LEDW10)
RGB - LED Color Changing (RGB)
**RGBDMX - LED Color Changing with DMX module (RGBDMX)
OTHER - Other (Consult factory)
* Remote Driver ONLY
**DMX Controller Not included. DMX module is an interface component ONLY
Shown: LPRV (Vanity Style)
4. Ballast/Driver Specification:
LED - LED Power Supply, Non-Dim (LED)
STD - Standard (STD) - Electronic, non-dim <10%THD
LED0-10V - LED Power Supply, Dimming 0-10V 120V only (LED0-10V)
1
Note: Fluorescent Dimming Options Not Available in Wall Unitss. Custom options
available. Consult factory.
6. Finish:
4 4"
Shown: LPRWF
5
4 8"
* AL (Natural “Ultimatte” aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your choice)
* AL is standard
7. Additional Options:
OS - Occupancy Sensor
PH - Photocell - Consult Factory (OS)
REM - Emergency Ballast (EM)
180
150
120
Lamp Configuration Chart: Individual and Continuous
Efficiency
Regular
2’
14 or 24w T5
1
21 or 39w T5
3’
4’
5’
1
28 or 54w T5
35 or 80w T5
1
6’
7’
2
1
1
8’
90
53.7 %
Catalog # LPRS-4
175
60
2
350
1
0
ACROSS
45
ALONG
30
Design Specifications
All fixtures come standard with EXT lens
Canopy to cover 4-O box
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Construction
Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable.
Reflectors are formed from .040 aluminum and finished in Titanium
white powdercoat.
Lenses are made from twin layered extruded high-impact acrylic.
EXT is a half frosted/white combination.
Electrical Details
All ballasts are electronic <10% THD
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to channel (unless otherwise noted).
Low voltage transformers are individual 75W units (277V/12V or
120/12V)
LED options available (consult factory)
Multiple interface options available including dimming, motion sensing, daylight harvesting and DALI.
ETL Listed
Non-lensed units rated for Indoor location only.
Lensed units rated for damp location.
Emergency
Remote only
Finish
All fixtures are standard in Ultimatte aluminum finish (AL) A deep etch and two-step clear anodizing process that
gives a smooth, clean and durable surface.
Powder Coat options are available. Consult factory.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
W-2
CAS
Wall Sconce
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
CAS - Indoor/Outdoor Wall Sconce
Page 1 of 2
TYPE:
Specification and Ordering Information:
1. Style:
CAS Wall Sconce (CAS)
2. Lamping:
*37 Watt MR16 (MR16)
20 Watt CMH-MR16 (GX1020)
39 Watt CMH-MR16 (GX1039)
39 Watt CDM/PAR20 (CDMPAR20)
39 Watt CDM/PAR30 (CDMPAR30)
*for LED MR16, retrofit lamp only
3. Distribution:
Direct/Indirect (ID)
*Direct (D)
*Indirect (I)
* Direct (D) and Indirect (I) distribution units are identical to
units shown, with blank top or bottom cap and single lamp.
1
52"
1
48"
1
48"
4. Ballast Housing:
Integral (INT)
*Remote (REM)
*Remote ballast configurations are furnished with remote
ballast, housing and 5ft of MC conduit.
5. Voltage:
6. Finish:
MR16-INT
120 - 120 volt (120)
277 - 277 volt (277)
347 - 347 volt (347)
* AL (Anodized aluminum)
BZ (Bronze powdercoat)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your choice)
GX1020/39-INT
5
58"
7
48"
REMOTE:
3
34"
1
62"
CDMPAR20-INT
7
58"
1
52"
*AL is standard on all CAS product
CDMPAR20-REM
1
48"
3
94"
CDMPAR30-INT
1
52"
1
78"
12"
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
CDMPAR30-REM
3
58"
CAS - Indoor/Outdoor Wall Sconce
Page 2 of 2
TYPE:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Option: Bronze (BZ)
- powdercoat
Design Specifications
Construction
Precision machined from billet aluminum.
Plated fixtures are solid brass.
Standard AL natural aluminum is finished by brushing, then clearcoating.
Electrical Details
Class P electronic ballasts
Low voltage transformers are individual 75W units (277V/12V or
120/12V).
CMH ballasts are remote and provided with units.
ETL Listed Outdoor Wet Location
Emergency
Not applicable
Finish
Standard AL natural aluminum is finished by brushing, then clearcoating. All plated finishes are applied on solid brass fixtures.
Powdercoat options available.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
W-3
LP MONO
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LP MONO
Page 1 of 4
TYPE:
Specification and Ordering Information:
1. Style:
LP-MONO-S - Suspended (LP-MONO-S)
LP-MONO-W - Wall (LP-MONO-W)
2. Overall Run Length:
Specify total run length (skip for Wall and Square
specification)
3. Downlight:
MR16: 1x 50 Watt MR16 Halogen (MR16)
AR111: 1 x 50/75 Watt AR111 Halogen (AR111)
PAR30: 1 x 50/75 Watt Par 30 Halogen (PAR30)
S08220: 1 x 22 Watt CDM20 TM BT-5 (S08220)
S08235: 1 x 35 Watt CDM35 TM BT-5 (S08235)
S11139: 1 x 39 Watt CDM35 TC-T4 (S11139)
S11170: 1 x 70 Watt CDM70 TC-T4 (S11170)
GX1020: 1 x 20 Watt CMH20/MR16 (GX1020)
GX1039: 1 x 39 Watt CMH39/MR16 (GX1039)
PAR3039: 1 x 39 Watt CDM35/PAR30L (PAR3039)
PAR3070: 1 x 70 Watt CDM70/PAR30L (PAR3070)
R11135: 1 x 35 Watt CDM-R111/35 (R11135)
R11170: 1 x 70 Watt CDM-R111/70 (R11175)
*CZEN15: Citizen® 1 x 15W Watt LED Module, 1050LM, 80CRI, 3000K (CZEN15)
*CZEN15-0-10V: Citizen® 1 x 15W Watt LED Module, 0-10V Dimming, 1050LM, 80CRI, 3000K (CZEN15-0-10V)
*CZEN15-H: Citizen® 1 x 15W Watt LED Module, Lutron® A Series Dimming, 1050LM, 80CRI, 3000K (CZEN15-H)
*CZEN20: Citizen® 1 x 20W Watt LED Module, 1200LM, 80CRI, 3000K (CZEN20)
*CZEN20-0-10V: Citizen® 1 x 20W Watt LED Module, 0-10V Dimming, 1200LM, 80CRI, 3000K (CZEN20-0-10V)
*CZEN20-H: Citizen® 1 x 20W Watt LED Module, Lutron® Hilume A Series Dimming, 1100LM, 80CRI, 3000K (CZEN20-H)
*CZEN30: Citizen® 1 x 30W Watt LED Module, 2000LM, 80CRI, 3000K (CZEN30)
*CZEN30-0-10V: Citizen® 1 x 30W Watt LED Module, 0-10V Dimming, 2000LM, 80CRI, 3000K (CZEN30-0-10V)
*CZEN30-H: Citizen® 1 x 30W Watt LED Module, Lutron® Hilume A Series Dimming, 2000LM, 80CRI, 3000K (CZEN30-H)
XC8030-700: Xicato® 1 x 22W Watt LED Artist Module, 700LM, 95CRI, 3000K (XC8030-700)
XC8030-700-0-10V: Xicato® 1 x 22W Watt LED Artist Module, 0-10V Dimming, 700LM, 95CRI, 3000K (XC8030-700-0-10V)
XC8030-700-H: Xicato® 1 x 22W Watt LED Artist Module, Lutron® A Series Dimming, 700LM, 95CRI, 3000K (XC8030-700-H)
**XC8030-1300: Xicato® 1 x 22W Watt LED1300LM, 80CRI, 3000K (XC8030-1300)
**XC8030-1300-0-10V: Xicato® 1 x 22W Watt LED1300LM, 0-10V Dimming, 80CRI, 3000K (XC8030-1300-0-10V)
**XC8030-1300-H: Xicato® 1 x 22W Watt LED1300LM, Lutron® A Series Dimming, 80CRI, 3000K (XC8030-1300-H)
XC8030-1000: Xicato® 1 x 15W Watt LED1000LM, 80CRI, 3000K (XC8030-1300)
XC8030-1000-0-10V: Xicato® 1 x 15W Watt LED 0-10V Dimming,1000LM, 80CRI, 3000K (XC8030-1300-0-10V)
XC8030-1000-H: Xicato® 1 x 15W Watt LED Lutron® A Series Dimming,1000LM, 80CRI, 3000K (XC8030-1300-H)
**XC8030-2000: Xicato® 1 x 36W Watt LED 2000LM, 80CRI, 3000K (XC8030-2000)
**XC8030-2000-0-10V: Xicato® 1 x 36W Watt LED, 0-10V Dimming, 2000LM, 80CRI, 3000K (XC8030-2000-0-10V)
**XC8030-2000-H: Xicato® 1 x 36W Watt LED Lutron® A Series Dimming , 2000LM, 80CRI, 3000K (XC8030-2000-H)
*LED1525: Edison® 1 x 15 Watt LED 25° 3000K (LED1525)
*LED1525-0-10V: Edison® 1 x 15 Watt LED, 0-10V Dimming, 540LM, 25° 3000K (LED1525-0-10V)
*LED1525-H: Edison® 1 x 15 Watt LED, 0-10V Dimming, 540LM, 25° 3000K (LED1525-H)
*LED1540: Edison® (1 x 15 Watt LED, 40° 3000K , 540LM 3500K (LED1540)
*LED1540-0-10V: Edison® 1 x 15 Watt LED, 0-10V Dimming, 540LM, 40° 3000K (LED1540-0-10V)
*LED1540-H: Edison® 1 x 15 Watt LED, 0-10V Dimming, 540LM, 25° 3000K (LED1540-H)
*No Accessory Options Available
**Denotes Additional Cooling Mechanism (Synjet Fan) required: Internal to unit.
For Additional LED options not listed, please consult LED MATRIX online, or Factory.
4. Beam Spread (Reflector Only):
*F - Flood (F)
*N - Narrow Flood (NF)
*S - Spot (S)
* Variations exist in beam spreads depending on lamp source.
CONTINUED ON NEXT PAGE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LP MONO
Page 2 of 4
TYPE:
5. Voltage:
120 -120 volt
277 - 277 volt
347 volt (not available in dimming)
* For LED, consult factory. Limitations exist.
6. Accessory Option:
HEX - Hexcell Louvers (HEX)
SNOOT - Snoot (SNT)
SOLITE - Solite Lens (SOL)
LSS - Linear Spread Lens (LSS)
**GC - Glare Cap (GC)
**Not Available in LED Options
7.Finish:
* AL - Natural “Ultimatte” aluminum (AL)
BK - Black powdercoat (BK)
WH - White powdercoat (WH)
RAL - Specify RAL # of powdercoat of your choice (RAL)
* AL is standard on all Lightplane 9 products
9. Additional Options:
OS - Occupancy Sensor (OS)
PH - Photocell - Consult Factory (PH)
EM - Emergency Ballast REMOTE (EM)
SB - Seismic Bracing - Consult Factory (SB)
Wall Mount
(Front View):
Suspended
(Elevation):
8ft Suspension
hardware std.
Wall Mount
(SideView):
5
4 8"
CONTINUED ON NEXT PAGE
5
1
4 8"
2 8"
13
13
10 16"
7
10 8"
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
10 16"
LP MONO
Page 3 of 4
TYPE:
MR1650
1 x 50 Watt MR16 Halogen
6” outer diameter gimbal ring / 2” central ring
270° outer/ 170° inner rotation
Holds up to 2 accessories / Precision Aiming
Power supply located in 6” ballast/transformer pan
R11135 / R11170
1 x 35/70 Watt CDM-R111/35/70
6” outer diameter gimbal ring / 5” central ring
270° outer/ 170° inner rotation
No accessories / Precision Aiming
Power supply located in 6” ballast/transformer pan
LEDMR16
1 x 3 Watt MR16 LED
6” outer diameter gimbal ring / 2” central ring
270° outer/ 170° inner rotation
No accessories / Precision Aiming
Power supply located in 6” ballast/transformer pan
LED1525
1 x 15 Watt LED Directional Light Module 25° 3000K
6” outer diameter gimbal ring
270° outer/ 170° inner rotation
534 Lumens - Precision Aiming
Power Supply Located in Channel
50AR111 / 75AR111
1 x 50/75 Watt AR111 Halogen
6” outer diameter gimbal ring / 4” central ring
270° outer/ 170° inner rotation
No accessories / Precision Aiming
Power supply located in 6” ballast/transformer pan
LED1540
1 x 15 Watt LED Directional Light Module 40° 3000K
6” outer diameter gimbal ring
270° outer/ 170° inner rotation
534 Lumens - Precision Aiming
Power Supply Located in Channel
QT1250 / QT1275
1 x 50/75 Watt T4 Halogen Capsule
6” outer diameter gimbal ring / 4” central ring
270° outer/ 170° inner rotation
Holds up to 1 accessory / Precision Aiming
Power supply located in 6” ballast/transformer pan
ADDITIONAL LED MODULES AVAILABLE - REFER TO
LED MATRIX ONLINE @ WWW.ARCHLTGWORKS.COM
PAR20
1 x 50 Watt PAR20 Halogen
6” outer diameter gimbal ring / 3” central ring
270° outer/ 170° inner rotation
Integral Snoot / Precision Aiming
Power supply located in 6” ballast/transformer pan
PAR30
1 x 50/75 Watt PAR30 Halogen
6” outer diameter gimbal ring / 4” central ring
270° outer/ 170° inner rotation
Integral Snoot / Precision Aiming
Power supply located in 6” ballast/transformer pan
S08220 / S08235
1 x 22/35 Watt CDM20/35 TM BT-5
6” outer diameter gimbal ring / 3-1/2” central ring
270° outer/ 170° inner rotation
Holds up to 1 accessory / Precision Aiming
Power supply located in 6” ballast/transformer pan
S11139 / S11170
1 x 39/70 Watt CDM35/70 TC T-4
6” outer diameter gimbal ring / 5” central ring
270° outer/ 170° inner rotation
Holds up to 1 accessory / Precision Aiming
Power supply located in 6” ballast/transformer pan
GX1020 / GX1039
1 x 20/39 Watt CMH20/MR16
6” outer diameter gimbal ring / 2” central ring
270° outer/ 170° inner rotation
No accessories /Aimable and lockable
Power supply located in 6” ballast/transformer pan
CDMPAR2039
1 x 35 Watt CDM35/PAR20
6” outer diameter gimbal ring / 3” central ring
270° outer/ 170° inner rotation
Integral Snoot / Precision Aiming
Power supply located in 6” ballast/transformer pan
CDMPAR3039 / GCDMPAR3070
1 x 39/70 Watt CDM35/70 PAR30L
6” outer diameter gimbal ring / 4” central ring
270° outer/ 170° inner rotation
Integral Snoot / Precision Aiming
Power supply located in 6” ballast/transformer pan
CDMPAR3870
1 x 70 Watt CDM70 PAR38
6” outer diameter gimbal ring / 5” central ring
270° outer/ 170° inner rotation
Integral Snoot / Precision Aiming
Power supply located in 6” ballast/transformer pan
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE 9
Page 4 of 4
TYPE:
Standard: Pendant Wire Mounting with adjustable aircraft cable suspension
*4-1/2” dia. canopy
to cover 4-O Octagon Junction box Bullet Aircraft cable
suspension.
*Adjustable GripLock cable suspension
Option: Seismic Bracing
Option: Mitered Angles
Aircraft cable can
mount on side of
channel to seismic
anchoring.
Consult Factory for
angle options.
*8FT suspension hardware is standard on all
ALW suspended fixtures
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
OPTION: Black - BK
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
OPTION: White - WH
powdercoat
Lamp Shielding Accessories:
Design Specifications
Hexcel Louver (HEX)
Linear Spread Lens
(LSS)
Solite Lens (SOL)
Snoot (SNOOT)
Construction
Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable.
Downlight reflectors are made from precision spum aluminum which
is chemically polished.
Electrical Details
All ballasts are electronic <10% THD (where applicable)
Class P electronic ballasts - Programmed start (where applicable)
Low voltage transformers are individual 75W units (277V/12V or
120/12V)
LED options available (consult factory)
Multiple interface options available including dimming, motion sensing, daylight harvesting and DALI.
ETL Listed for Indoor location only.
Finish
All fixtures are standard in Ultimatte aluminum finish (AL)
- A deep etch and two-step clear anodizing process
that gives a smooth, clean and durable surface.
Powder Coat options are available. Consult factory.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
shaperlighting.com
DESCRIPTION
687 features classic Geometric Wedge shape with indirect illumination.
The 687-4 features similar geometry and is ADA compliant.
Type
Catalog #
W-5
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
M a te ri a l
Ballast
Options
Painted or plated cold-rolled steel
base metal. Optional aluminum
cube cell louver, white.
Integral Electronic HPF multi-volt
120/277V (347V Canada - not
available in 13W), thermally
protected with end-of-life circuitry
to accommodate the specified
lamp wattage. Metal Halide Ballast
are HPF core and coil type, multivolt 120/277V for the specified
wattage. Contact factory for 347V.
Quartz Restrike-12" 687 MH only
(QS), 1/2" Cube Cell Louver (CL),
Tempered Glass Lense - MH only
(TGL), Punch Pattern - White (WPP),
Blue (BPP), Green (GPP) Red (RPP)
or Yellow (YPP), Perforated Panel
Insert (PI), Modified Emergency
Ballast (MEM) - 687-12" only,
Remote Emergency Ballast (REM),
Damp Location (DL): All painted
finishes only. Energy Star Rating Contact factory. MRI Applications
(INC only) - Contact factory.
Finish
Standard: Matte White (MW).
Premium: Aluminum Paint (ALP),
Bronze Metallic Paint (BM), Gold
Metallic Paint (GM), Gun Metal
(GNM), Natural Aluminum (NA)
[Sustainable Design], Satin Chrome
(SC), Polished Chrome (PC), Satin
Brass (SB), Polished Brass (PB),
Satin Aluminum (SAL), Oxidized
Bronze (OBZ), Satin Copper (SCP),
Polished Copper (PCP), Oxidized
Copper (OCP), Satin Nickel (SN),
Polished Nickel (PN), Oxidized
Brass (OBRS) or Custom Color
(CC).
Custom Decorative Metals:
(Specify a Color and Pattern)
Colors - Clear (CLR, Cabernet
(CBT), Sapphire (SPE), Sage (SGE),
Brass (BRS), Copper (CPR), Black
Pearl (BPL), Slate Green (SGN),
Champagne (CMP), Chocolate
(CLE), Indigo (IDO), Royal blue
(RBE), or Pewter (PWR).
Patterns - Coral (COL), Seashell
(SHL) or Smooth (SMT). Minimum
quantity is 10 of one color/pattern.
Contact the factory for lead time.
Optics
Refer to www.shaperlighting.com
for complete photometrics.
L a m p / S o cke t
687 - 9": One (1) 26W or 32W
(GX24q-3) 4-pin triple CFL lamp or
one (1) 75W A-19 lamp.
687/4 - 9": One (1) 13W (2GX7) 4pin low wattage CFL lamp, one (1)
26W (G24q-3) 4-pin quad CFL lamp
or one (1) 75W A-19 lamp.
687 - 12": Two (2) 26W or 32W
(GX24q-3) 4-pin triple CFL lamps,
two (2) 75W A-19 lamps or one (1)
50W, 70W or 100W ED-17 metal
halide (open burn) lamp.
687/4 - 12": Two (2) 26W (G24q-3)
quad CFL lamps or two (2) 75W A19 lamps.
CFL socket injection molded
plastic. INC socket fired ceramic
rated for 660W-250V. Lamps
furnished by others.
Labels
U.L. and C.U.L approved for indoor
and damp location. See options for
damp location finishing
requirements. Shaper's DL option
is for interior applications (only)
that have more than average
moisture (i.e. bathroom, laundry
room, etc.) but are not UL listed for
pool, sauna, shower, whirlpool and
any exterior applications (i.e.
covered garage or building
entrance) with exposure to weather
elements such as rain, wind, etc.
687/4-9 and 687/4-12 are ADA
compliant.
Installation
Modifications
Supplied with a universal circular
strap (687/4 and 687-9) or falseback
(687-12) for a standard 4" J-box or
plaster ring. Shaper luminaires are
designed for interior installations
only.
Shaper's skilled craftspeople with
their depth of experience offer the
designer the flexibility to modify
standard wall luminaires for project
specific solutions. Contact the
factory regarding scale options,
unique finishes, mounting,
additional materials/colors, or
decorative detailing.
687 SERIES
687/4 SERIES
I n t e r i o r Wa l l L u m i n a i r e
C l a s s i c G e o m e t r i c We d g e
ARRA
Shaper Lighting certifies that its products
satisfy the requirements of Section 1605 of
the American Recovery and Reinvestment
Act (also known as the ARRA Buy American
provision).
AMERICAN DISABILITIES
ACT (ADA)
Shaper offers a large selection of ADA
interior and exterior wall luminaires.
ADA requires all fixtures below 68" to
have a maximum projection of 4".
SUSTAINABLE
DESIGN
Shaper has a long-standing history
of offering environmentally-friendly
fixtures. The copper and bronze alloys
used in our exterior luminaires feature
up to 98% recycled content, contribute
less undesirable air emissions compared
to painted aluminum and are easy to
recycle.
MAGNETIC
RESONANCE
IMAGING (MRI)
Lighting fixtures for MRI facilities are
specialized and unique, requiring nonferrous construction. Fluorescent fixtures
cannot be used due to the ferrous parts in
ballasts and lampholders. Modified incandescent fixtures meet the requirements.
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADS042691
2012-03-23 14:28:29
687 - 687/4 SERIES INTERIOR WALL LUMINAIRE
shaperlighting.com
O R D E R I N G I N F O R M AT I O N
Sample Number: 687-12-W- MH/1/70-277V-BPL/SHL
Series
687 =Geometric
Wedge
687/4 =Geometric
Wedge
Size
9"
12"
Mounting Type
W = Wall
Lamp
CFL/1/13
CFL/1/26
CFL/1/32
2
1, 3, 2
1, 3
Voltage
120V
5
277V
6
347V
CFL/2
(26/32W-Triple) 4, 3
7
Color
Standard
Custom Decorative
Metals
MW =Matte White
Premium
ALP = Aluminum Paint
BM = Bronze Metallic Paint
CC =Custom Color
CFL/2/26 2
INC/1/75 1, 3, 2
INC/2/75 4, 3, 2
MH/1/50 4, 3
MH/1/70 4, 3
MH/1/100 4, 3
Notes:
Finish
GM = Gold Metallic Paint
GNM = Gun Metal
NA =Natural Aluminum
OBRS =Oxidized Brass
OBZ = Oxidized Bronze
OCP = Oxidized Copper
PB =Polished Brass
1 Available in 9".
2 Available with 687/4 Series.
3 Available with 687 Series.
4 Available in 12".
PC =Polished Chrome
PCP = Polished Copper
5 CFL and MH only.
Pattern 8
PN =Polished Nickel
SAL = Lacquered Satin
Aluminum
SB =Satin Brass
6 Available with CFL only (not available in 13W).
7 Leave blank if specifying Custom Decorative Metals finish.
8 Available with Cusotm Decorative Metals finish only.
9 MH only.
CLR =Clear
CBT =Cabernet
SPE =Sapphire
SGE =Sage
BRS =Brass
CPR =Copper
BPL =Black Pearl
SGN =Slate green
CMP =Champagne
CLE =Chocolate
IDO =Indigo
RBE =Royal Blue
PWR =Pewter
Options
11
BPP =Blue Punch Pattern
GPP =Green Punch Pattern
11
RPP =Red Punch Pattern
11
11
WPP =White Punch Pattern
11
YPP =Yellow Punch Pattern
CL =Cube Cell Top Louver
DL =Damp Location 10
MEM =Modified Integral
Emergency Ballast
3, 4, 6
PI = Perforated Panel Insert
QR =Quartz Restrike 3, 4, 9
11
REM =Remote Emergency
Battery 12
TGL =Sandblasted Tempered
Glass Lens 9
COL=Coral
SHL=Seashell
SMT=Smooth
SC =Satin Chrome
SCP = Satin Copper
SN = Satin Nickel
10 Interior applications only.
11 Contact factory for these options in 687/4-12.
12 Supplied by others.
M O U N T I N G TY P E S
9” (22.8 cm)
8”
3/8”
(.95 cm)
9”
8”
(20.3 cm)
3/8”
(.95 cm)
4”
(10.1 cm)
8”
8”
8”
4”
687-9”
687/4-9”
12” (30.5 cm)
11” (28 cm)
4”
12”
1”
3/8”
(2.54 cm)
10”
(25.4 cm)
10”
10”
11”
4”
687-12”
687/4-12”
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADS042691
2012-03-23 14:28:29
687 - 687/4 SERIES INTERIOR WALL LUMINAIRE
shaperlighting.com
OPTIONS
1/2” (1.2 cm) CUBE CELL LOUVER (CL)
TEMPERED GLASS LENS (TGL)
PERFORATED PANEL INSERT (PI)
PUNCH PATTERN WHITE (WPP), BLUE (BPP),
GREEN (GPP), RED (RPP)
C O M PA N I O N P R O D U C T S
682-WP
684-WP
6 8 7- W P
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADS042691
2012-03-23 14:28:29
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — Suitable for architectural applications where aesthetics and superior performance
are required.
Type
CONSTRUCTION — High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate
visible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.
Standard housing finish is brushed aluminum.
X-1
Precision-molded, textured letters – 6” high with 3/4” stroke, with 100 ft viewing distance rating, based
upon UL924 standard. Chevron indicator direction must be specified.
Recessed rough-in section constructed of 20-gauge, die-formed galvanized steel.
Edge-Lit Exits
Extruded aluminum housing trim mounts flush onto wall or ceiling.
Mounting canopy for top mount is constructed of extruded aluminum to match housing finish.
LRP
OPTICS — LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.
Low energy consumption – only 1.5W for 120V single-face red sign; 1.2W for 120V single-face green sign.
INSTALLATION — Recessed mount – rough-in section for back, ceiling or end mounting. Fits into minimum
wall or ceiling opening 13-5/8” L x 4-1/2” W x 3-1/8” D.
Adjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed
openings. Trim ring has 3/4” variable depth adjustment to ensure flush fit against surface of wall or ceiling.
LED LAMPS RECESSED OR TOP MOUNT
Plug-in wire connections and self-captive mounting screws for mounting panel/trim to rough-in section.
Top mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.
LISTINGS — UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code),
NEC and OSHA illumination standards, and State of Minnesota requirements for less than 20W energy
consumption. Listed and labeled to comply with Canadian Standards C-860 and C-22.2 No. 9 (see options).
NEMA Premium certified.
WARRANTY — 5-year limited warranty, including lamps. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
All life safety equipment, including emergency lighting for path of egress must be maintained, serviced,
and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to
perform the required maintenance, service, or testing could jeopardize the safety of occupants and will
void all warranties.
Actual performance may differ as a result of end-user environment and application.
Note: Specifications subject to change without notice.
ORDERING INFORMATION
Example: LRP 2 RMR DA 120/277
For shortest lead times, configure products using bolded options.
LRP
Family
Housing color
Number of faces
Letters/background
Directional indicators3
Input voltage
LRP LED
(blank)
W
B
BZ
BS
CR
U
1
2
RW
RC
RMR
GW
GC
GMR
(blank)
LA
RA
LRA
DA
120/277 Dual voltage1
120/347 Dual voltage6
Brushed aluminum
White
Black
Bronze
Polished brass
Chrome
Unfinished
Mounting
(blank)
EM
TM
Single face
Double face
Red on white
Red on clear (single face only)1
Red on mirror1,2
Green on white1
Green on clear (single face only)1
Green on mirror1,2
Options8
Item type
Recessed ceiling or
back mount
Recessed end mount
Top mount7
(blank)
PNL
Complete exit panel and rough-in section
Panel assembly only
Accessories: Order as separate items.
ELA LCRIS
ELA US12
EMERGENCY
None
Left4
Right4
Left and right
Double face5
LED rough-in section (supplied standard with recessed exit unless PNL suffix is
specified; order ELA LCRIS only if needed for early installation).8
12” pendant-mount kit. Mounting canopy is brushed aluminum. To order white
or black canopy, add W or B to catalog number. Example: ELA W US12. To order
24” or 36” lengths, add 24 or 36 to catalog number. Example: ELA US24. See spec
sheet ELA-StemKits.10
FI
X2
CSA
Fire alarm interface1,9
Lamp boards wired on two separate circuits (specify 120V or 277V)1,9
Listed and labeled to comply with Canadian Standards
Notes
1 Not available with CSA option.
2 Simulates clear background for double-face exits.
3 See chart on back for more information.
4 Only available with single face.
5 Only available with double face.
6 Only available with CSA option.
7 No rough-in section required. Attaches directly to J-box.
8 When ordering recessed rough-in separately, all options must be included
with rough-in nomenclature. Example: ELA LRIS 120 X2.
9 Not available with top-mount exits.
10 Top-mount exits only.
LRP
LRP Precise® LED Exit Signs
SPECIFICATIONS
MOUNTING
All dimensions are in inches (centimeters).
Shipping weight for panel: 5 lbs. (2.3 kgs.)
Shipping weight for rough-in section: 4.6 lbs. (2.1 kgs.)
ELECTRICAL
Primary Circuit
Type
Typical
LED life1
Red
10 years
Red
10 years
Green
10 years
Green
10 years
Supply
voltage
120
277
347
120
277
347
120
277
120
277
Number of
faces
1
1
1
2
2
2
1
1
2
2
Input
watts
1.5
1.8
2.2
3.1
3.4
4.1
1.2
1.3
2.0
2.3
Max.
amps
.087
.089
.107
.178
.180
.220
.064
.062
.06
.06
RECESSED
3-1/8
(7.9)
4-1/2
(11.4)
13-5/8
(34.6)
Rough -In Section
2
(5.1)
14-3/4
(37.5)
8
(20.3)
13-1/2
(34.3)
Notes
1 Based on continuous operation.The typical life of the exit LED lamp is 10 years.
End Mount
1-3/4
(4.4)
1-3/4
(4.4)
14-3/4
(37.5)
13-1/8
(33.3)
5-1/4
(13.3)
8
(20.3)
8
(20.3)
13-1/4
(33.7)
13-1/4
(33.7)
Back Mount
1-3/4
(4.4)
2
(5.1)
Ceiling Mount
5-1/4
(13.3)
13-1/8
(33.3)
2
(5.1)
4-1/4
(10.8)
8
(20.3)
13-1/4
(33.7)
Top Mount
With Pendant
Mounting kit
KEY FEATURES
Unique wedge-shaped panel design concentrates
light for uniform letter illumination.
Trim fits flush against wall or ceiling for clean,
attractive appearance.
Small rough-in section.
LRP
EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694 Fax: 770-981-8141 www.lithonia.com
© 1994 - 2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/21/13