Reactor E Series Proportioners
QUICK CONNECTS
and BUNDLED HOSES
...for easy drum movement
T1 2:1 TRANSFER PUMPS
2.5 GPM
AIR MANIFOLD
l MAIN IN
l LOCK OUT VALVE w/BLEED
l AIR REGULATOR for TRANSFER PUMPS
l AUX PORTS FOR UNREGULATED REQUIREMENTS
300 PSI
AIR MIXER PACKAGE
includes AIRLINE and FITTINGS
HIGH PRESSURE
RECIRCULATION HOSES
...for closed system
INDUSTRY STANDARD
P2 GUN
HIGH PRESSURE
1/8” SST
WHIP HOSE
PRE-PACKAGED SYSTEMS
ALA CARTE PER YOUR PRODUCTION REQUIREMENTS
MCC Equipment & Service Center
SALES
l
SERVICE
l
SOLUTIONS
PROBLER P2 GUN
The Probler P2 is the smallest, and lightest gun available for
plural component polyurethane foam and polyurea coatings
spray systems. When you are spraying fast set materials there
is no room for error. The spray gun needs to perform at 100%
efficiency – 100% of the time. Graco understands that the spray
gun and its efficient operation is critical to maximizing profitability,
uptime, quality, and overall customer satisfaction. We focused on
this when designing the patented technology used in the Probler
P2. As a result, the Probler P2 has proven itself.
Patented Endurance Chamber
Patented High Velocity Piston
Patented Dual Piston Isolation Design
TRANSFER PUMPS
DRUM MIXERS
Transfer pumps are specifically designed for use with
difficult to handle materials.
• Our most popular pneumatic mixer.
• Features a new low noise muffler, coupled with a 1.5 HP
air motor.
• Minimal maintenance required.
• Operating speed of 200 to 1200 RPM depending on
viscosity.
• Speed control is on the outlet side allowing maximum
power at all times.
• All wetted parts are Stainless Steel
• Collapsible blades allow insertion in to 2” bung holes.
• Drum length mixer is standard, tote length also available.
The immersed lower pump, tie tubes, and sealing bung
bushing allow quick drum change without exposing the
system to contamination and moisture.
• Carbon Steel or stainless steel construction for economy
and durability
• Teflon® packings and Viton® seals for material
compatibility.
• Available in tote, drum and stubby lengths.
Maximum Output
Maximum Fluid
Temperature
Maximum Fluid
Working Pressure
Maximum Hose Length
Heater Wattage and
Power Requirements
Reactor E-10
Reactor E-20
Reactor E-30 R2
Reactor E-XP1
Reactor E-XP2 R2
12 lb/min
( 5.4 kg/min )
160°F
( 71°C )
12 lb/min
( 9 kg/min )
190°F
( 88°C )
30 lb/min
( 13.6 kg/min )
2.0 gpm
( 7.6 lpm )
2000 psi
( 138 bar, 13.8 MPa )
105 ft
( 32 m )
120V model
Two cords with two 15A circuits
2000 psi
( 138 bar, 13.8 MPa )
310 ft
( 94 m )
With 10.2 kW heater
78A-230V, 1-ph
50A-230V, 3-ph
34A-400V, 3-ph
190°F
( 88°C )
2000 psi
( 138 bar, 13.8 MPa )
310 ft
( 94 m )
With 10 kW heater
78A-230V, 1-ph
50A-230V, 3-ph
34A-400V, 3-ph
1.0 gpm
( 3.8 lpm )
190°F
( 88°C )
With 15.3 kW heater
100A-230V, 1-ph
62A-230V, 3-ph
35A-400V, 3-ph
With 15 kW heater
100A-230V, 1-ph
62A-230V, 3-ph
35A-400V, 3-ph
240V model
Two cords with two 10A circuits
One cord with one 20A circuit
(Heated and unheated
options available)
MCC Equipment & Service Center
www.mccind.com
2500 psi
( 172 bar, 17.2 MPa )
190°F
( 88°C )
3500 psi
( 241 bar, 24.1 MPa )
210 ft
( 64 m )
With 10.2 kW heater
69A-230V, 1-ph
43A-230V, 3-ph
24A-400V, 3-ph
310 ft
( 94 m )
With 15kW heater
100A-230V, 1-ph
62A-230V, 3-ph
35A-400V, 3-ph
7301 Georgetown Road, Suite 210
Indianapolis, Indiana 46268
317-209-1111
MCC-0007 REV 11/14