Design Guide…
…click on the detail you need
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Design Guide for Architects and Interior Designers
• Techstyle Design Features
 Swing-down or Lay-in
 Surfaces
 Dimensions
 Layout Concepts
• Light integration
• HVAC integration
• Perimeter Solutions & CAD details
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Techstyle Swing-Down
Maximum panel size 48”x 72”
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Techstyle Lay-in
Maximum panel size 48”x 96”
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Techstyle E:
o Lowest VOC’s in industry;
GreenGuard Certified
For Children and Schools
o Less sensitive to soiling
o Easy to clean
o Light reflectance: LR1 81%
o NRC; 0.85 and SAA 0.86
o Surface Burning; Class A
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/techstyleE/index.jsp
Techstyle Translucent:
o Back-lit Acoustical ceiling
o Formaldehyde free
o NRC: 0.85 and SAA: 0.86
o Surface Burning; Class A
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/techTranslucent/index.jsp
Translucent Techstyle Applications
General Recommendations;
• Translucent Techstyle ceilings offer a light-effect and are generally not meant to be the
only light source, as the light transmittance is about 3%.
• For best distribution of light we found;
• Techstyle is a great Natural daylight diffuser in atrium applications.
•“ the distance between lights=distance from light to ceiling surface= 12”-18”
• Painting the plenum bright white, increases the initial amount of foot candles about 50%
without adding any lights
• In all cases we recommend to build a mock-up to assure that design intentions are met.
Denver County Courtroom Facility
Design goal: NRC :0.85 and 80 footcandles @ 3’ off the floor.
Denver County Courtroom Facility
•White painted plenum
•150 foot candles above the ceiling
•Fluorescent lights at 24” centers
•3% Translucent Techstyle
•54% Translucent Lexan
•Average of 85 foot candles at 3’ off the floor
Techstyle Canvas:
o Techstyle Ceilings in any solid color
o Collection of 100 prints including;
Wood
Textures
Brushed
Stone
Leather
o High quality sublimation printing
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/techCanvas/index.jsp
CANVAS
Gallivan Center, Utah
Canvas color: Natiello 2133
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
New!!!
FF3 trim for full module panels
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Techstyle Dimensions
Panel length in 6” increments from
6” up to 72”
Panel width 48” and 24”
(30” upon request)
!! Note that Techstyle hinges from this edge!!
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Techstyle Lay-out concepts
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Techstyle Lay-out concepts
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Techstyle Lay-out concepts
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Techstyle Light Integration
o Can Lights
o Linear Integrated Lights
o Other Lights
o Techstyle Translucent
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Can Light Integration Considerations
• Can lights to be top-ventilated to avoid light leakage around the fixture
• Flanged Trim ring to have at least 1 ½ “adjustability under T-grid level
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
FEATURES
OPTICAL SYSTEM
•
Internal housing components painted matte black. Lamp
snoot minimizes stray light in housing.
•
Self- flanged semi-specular, matte-diffuse or specular
cone with flange that matches cone finish.
•
Optical system retained by self-aligning, torsion support
springs.
•
Accommodates up to two lenses, filters or louvers.
•
Softening lens standard.
MECHANICAL SYSTEM
•
Black painted housing features tool-less top access and
accommodates a maximum 1-1/2" ceiling thickness.
•
Re-lamp capability from above or below ceiling.
•
16-gauge galvanized steel mounting bars with continuous
4" vertical adjustment are shipped pre-installed. Post
installation adjustment possible without the use of tools
above or below ceiling.
•
Secondary housing adjustment system for precise, final
flange to ceiling alignment.
•
Galvanized steel junction box with hinged access covers
and spring latch. Four combination 1/2"-3/4" knockouts for
straight-through conduit runs. Capacity: 8 (4 in, 4 out) No.
12 AWG conductors, rated for 90°C.
ELECTRICAL SYSTEM
•
Tool-less access door provides access to junction box
through the aperture.
•
Replaceable socket assembly. MR16 socket assembly
standard.
•
12-volt electronic transformer is replaceable without the
use of tools.
•
Thermally-activated insulation detector is replaceable
without the use of tools.
LISTING
•
Fixtures are UL listed for thru-branch wiring, Non-IC
recessed mounting and damp locations. Listed and
labeled to comply with Canadian Standards.
Type
Catalog number
.................................
......................................................................................................
.................................
......................................................................................................
Low Voltage Downlights
4" DLV
Downlight
Open Cone
75 Watt Max
6-3/4
(17.1)
15-1/8
(38.4)
13-11/16
(34.8)
All dimensions are
inches (centimeters)
Aperture:
Ceiling opening:
Overlap trim:
4-5/16 (11.0)
4-7/8 (12.4)
5-1/2 (14.0)
Example: DLV DWN MR16 4AC 120
ORDERING INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line.
Order accessories as separate catalog numbers (shipped separately).
DLV
DWN
Series
DLV
Lamp designation
MR16 capability
(standard)
MR11 MR11 capability
ALR12 ALR12 capability
ALR18 ALR18 capability
AR70 1 AR70 capability
MR16
Configuration
DWN
NOTES
1 Clear safety lens standard with AR70 lamp designation.
2 Not available with finishes.
3 For compatible Reloc systems, refer to Technical Bulletins tab.
Aperture/Trim color
2
Black
Clear
Pewter
Umber
Wheat
Gold
White painted
Contoured black
baffle
4WB 2 Contoured white
baffle
4BC
4AC
4PC
4UBC
4WTC
4GC
4WC 2
4MB2
Finish
Voltage
Options
(blank) Semispecular
LD Mattediffuse
LS Specular
120
277
347
TRW White painted flange.
(Standard with WC, MB,
and WB)
TRBL Black painted flange
LRC3 Provides compatibility
with Lithonia Reloc System. Lithonia Reloc System can be installed less
this option with connectors provided by others.
Access above ceiling required
SF Single Fuse
Accessories
• For lens accessories, refer to
Technical Bulletins tab.
• For lamp options, refer to
Technical Bulletins tab.
DLV 4
DLV-140
FEATURES
Type
Catalog number
.................................
......................................................................................................
.................................
......................................................................................................
OPTICAL SYSTEM
•
Self-flanged, semi-specular, matte-diffuse or specular cone designed to minimize backflash. Contour cut reduces visibility of inner housing.
•
Center Beam optical system centers the lamp relative to the aperture, optimizing lamp efficiency.
•
Tool-less 0° - 40° vertical and 355° horizontal lamp adjustments
made with the trim assembly removed for simple focusing. Lockable adjustment mechanisms maintain focus during relamping and
are visible from below the ceiling with trim assembly removed.
•
Designed to allow hot aiming.
•
Optical system retained by self-aligning torsion support springs.
•
Internal housing components painted black.
MECHANICAL SYSTEM
•
Black painted housing features tool-less top access and accommodates a maximum 1-1/2" ceiling thickness.
•
Re-lamp capability from above or below ceiling.
• 16-gauge galvanized steel mounting bars with continous 4" vertical
adjustment are shipped pre-installed. Post installation adjustment
possible without the use of tools above or below ceiling.
•
Secondary housing adjustment system for precise, final flange to
ceiling alignment.
•
Galvanized steel junction box with hinged access covers and spring
latch. Three combination 1/2" - 3/4" and one 1/2" knockout for
straight-through conduit runs. Capacity: 8 (4 in, 4 out) No. 12 AWG
conductors rated for 90°C.
ELECTRICAL SYSTEM
•
Tool-less access door provides access to junction box through the
aperture.
•
12-volt electronic transformer is replaceable without the use of
tools.
•
Thermally-activated insulation detector is replaceable without the
use of tools.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, Non-IC recessed
mounting and damp locations. Listed an labeled to comply with
Canadian Standards.
Low Voltage Incandescent
6" DLV
Directional
Max 100 watt
12-1/8 (30.8)
Aperture:
Ceiling opening:
Overlap trim:
6-1/4 (15.9)
6-7/8 (17.5)
7-1/2(19.1)
22
(55.9)
All dimensions
are inches
(centimeters)
19-3/4
(50.2)
Example: DLV AR70 6ACT30 120 TRW
ORDERING INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line.
Order accessories as separate catalog numbers (shipped separately).
DLV
Series
DLV
Lamp designation
AR70
AR111 1
MR16
PAR36
(75W max.)
(100W max.)
(75W max.)
(75W max.)
Aperture/Trim Color
Clear
Black
Pewter
Umber
Wheat
Gold
White
painted
6MB2 Black
baffle
6WB 2 White
baffle
6AC
6BC 2
6PC
6UBC
6WTC
6GC
6WC 2
NOTES
1 Available in 120V only.
2 Not available with finishes.
3 Only available 347V.
4 Only available 120 or 277V.
5 For compatible Reloc systems, refer to Technical Bulletins tab.
6 Refer to Technical Bulletins tab for lens color availability.
Type
Finish
Voltage
T30 Cut for
angles
25°-40°
T20 Cut for
angles
15°-25°
T00 Cut for
angles
0°-15°
(blank) Semispecular
LD Mattediffuse
LS Specular
120
277
347
LFH503
GFC700
F200
F300
F5006
F7006
Options
TRW White painted flange
(Standard with WC,
MB, and WB.)
TRBL Blackpainted
flange
LRC5 Provides compatibilTransformer
ity with Lithonia
R e l o c ®S y s t e m .
(blank)3 Electromagnetic
Lithonia Reloc Systransformer
tem can be installed
less this option with
LVET4
Low voltage
connectorsprovided
electronic
by others. Access
transformer
above ceiling required
CP Chicago Plenum
Accessories
Order as Separate Catalog Number
Locking Filter Holder for use with PAR36 and AR111.
Gotham filter clips for use with PAR36 & AR111.
Lens for use with MR16 lamps.
Lens for use with AR70 lamps.
Lens for use with 500 series filter holder.
Lens for use with 700 series filter clip.
DLV 6
ALV-190 Rev 2/10
FEATURES
Type
Catalog number
OPTICAL SYSTEM
• Self-flanged, semi-specular or matte-diffuse reflector with
hybrid finish wallwash kicker providing uniform vertical
illumination and light high on the wall.
• Patented Vertisys®-Bounding RayTM Optical Principle design
(US Patent #5,800,050) provides lamp before lamp image.
Lamp image that reflects smoothly from the top of the
reflector to the aperture, providing optimal fixture
performance and efficiency.
.............................
.......................................................................................................
.............................
.......................................................................................................
Compact Fluorescent Downlights
4" AFVW
Open Wallwash
MECHANICAL SYSTEM
• 16-gauge galvanized steel mounting/plaster frame with
integral yoke and flat spring to retain optical system.
Maximum 1-5/8” ceiling thickness.
• 16-gauge galvanized steel mounting bars with continuous 4"
vertical adjustment are shipped pre-installed. Post
installation adjustment possible without the use of tools
from above or below the ceiling.
• Galvanized steel junction box with hinged access covers
and spring latch. Two combination 1/2”-3/4” and three 1/2”
knockouts for straight-through conduit runs. Capacity: 8 (4
in, 4 out) No. 12 AWG conductors rated for 90°C.
Vertical Lamp
9-3/8
(23.8)
ELECTRICAL SYSTEM
• Rugged aluminum lampholder housing.
• Vertically mounted, positive-latch thermoplastic socket.
• Class P, thermally-protected, high power factor ballast
mounted to the junction box.
• Simply5TM technology available.
LISTING
• Fixtures are UL Listed for thru-branch wiring, Non-IC
recessed mounting, and damp locations. Listed and labeled
to comply with Canadian Standards.
Aperture: 4-5/16 (11)
Ceiling Opening: 5-1/8 (13)
Overlap Trim: 5-7/16 (13.8)
15-7/8
(40.3)
All dimensions
are inches
(centimeters)
13-3/8
(34.0)
Example: AFVW 26TRT 4AR MVOLT WLP
ORDERING INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line.
AFVW
Series
Wattage/
Lamp
Aperture/
Trim color
Finish
Lens type
Voltage
Ballast3
Options
6
AFVW
(blank) No lens
4AR Clear
(blank) Semi(blank) Electronic ballast ELR Emergency battery pack.
MVOLT
13DTT
Remote test switch
4
specular
ECOS
EcoSystem
CGL
Clear
4PR
Pewter
120
13TRT
GMF7 Single, slow-blow fuse
glass
lens
electronic
LD Matte4UBR Umber
GLR7 Single, fast-blow fuse
277
18TRT
dimming ballast.
diffuse
TRW White painted flange
4WTR Wheat
347
26TRT
Minimum
(standard on MB and WB)
4WR 1 White
dimming level 5%. TRBL Black painted flange
32TRT
painted
WLP With 3500°K lamp (shipped
ADEZ 4,7 Advance Mark
separately)
10® m dimming
LRC8 Provides compatibility
level 5%
with Lithonia Reloc
S55 SIMPLY5TM sysNOTES
System. Reloc System can
tem
ballast
1 Not available with finishes.
be installed less this
2 Multi-volt electronic ballast capable of operating on any line
option with connectors
voltage from 120V through 277V, 50 or 60Hz.
provided by others.
3 For additional ballast types, refer to Technical Bulletins tab.
Access above ceiling
4 Not available 13DTT.
required
TM
5 Simply5 includes 9' S5 MLC Reloc wiring system (shipped sepaAccessories
BDP9 Ballast disconnect plug
rately). Available in 120V or 277V only. Not available in 18W. See
Order as separate catalog number.
HW Hardwire for S5 system;
simply5.net for more information.
replaces Reloc
SCA4
Sloped
ceiling
adapter.
6 For dimensional changes, refer to Technical Bulletins tab.
ELRHL6 High lumen output
Degree
of
slope
must
be
7 Not available with MVOLT.
emergency battery pack.
specified (10D, 15D, 20D,
8 For compatible Reloc systems, refer to Technical Bulletins tab.
Remote test switch
25D,
30D).
Ex:
SCA4
10D
9 Meets codes that require in-fixture disconnect.
provided
10 One 5A relay with one 0-10 VDC dimming output,
NSD10 Sensorswitch n LightTM
shipped installed. Requires additional nLight bus power supply.
dimming relay
2
AFVW 4
DCF-330
FEATURES
Type
Catalog number
OPTICAL SYSTEM
Three preset distribution patterns allow designers to
•
achieve various design objectives.
•
Reflector – Clear anodized upper reflector and 6-inch
self-flanged finishing trim provide 50o cut-off, optimal
efficiency and glare control while maintaining a smooth
beam pattern that is free of hot spots and striations.
•
Protective lamp guard utilizes clear ceramic technology that reduces UV emissions and provides higher heat
tolerance and better protection than standard borosilicate lenses.
MECHANICAL SYSTEM
•
One-piece die-cast aluminum housing provides 3 square
feet of surface area to dissipate heat and improve lamp
life. Entire housing is coated with black paint to minimize visibility when installed in open ceiling construction.
•
Lamp is accessible from above or below the ceiling without the use of tools. All hardware is captive.
•
16-gauge painted steel mounting/plaster frame accommodates up to 1-1/2” thick ceiling materials.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjustment are shipped pre-installed.
Post installation adjustment possible without the use of
tools from above or below ceiling.
•
Secondary housing adjustment system for precise, final
ceiling to luminaire alignment eliminates trims that protrude into the space.
•
Galvanized steel J-box with bottom hinged access covers and spring latches. Two combination 1/2"-3/4" and
three 1/2" knockouts for straight-through conduit runs.
Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated
for 90o C.
ELECTRICAL SYSTEM
•
Heavy-duty mini-can socket for T-4 lamp is integrated
into the cast housing for effective heat dissipation.
•
Thermally-activated insulation detector attached to Jbox is accessible from above or below the ceiling.
LISTING
•
Fixtures are UL listed for thru-branch wiring, recessed
mounting and damp locations and are Non I/C rated.
Listed and labeled to comply with Canadian Standards.
•
Suitable for installation on non-fire resistant material.
.................
.................................................................................................
.................
..................................................................................................
Incandescent Downlights
6" GQ
Ellipsoidal
Open Reflector
Quartz Halogen T4 Lamp
17-7/16
(44.3)
19-11/16
(50.0)
Aperture:
Ceiling Opening:
Overlap Trim:
6-1/4" (15.9)
6-7/8" (17.5)
7-1/2" (19.1)
13-7/16
(34.1)
All dimensions
are inches
(centimeters).
Example: GQ 500 M 6AR
ORDERING INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line.
GQ
Series
Lamp wattage1
GQ
400
500
Distribution
N Narrow
M Medium
W Wide
Aperture/Trim color
6AR
6BR2
6CR
6GR
6WTR
6UBR
6PR
6MB 2
6WB 2
Clear
Black
Champagne
Gold
Wheat
Umber
Pewter
Black baffle
White baffle
Finish
Options
(blank) Clear
Anodized
LD Diffuse
LS Specular
TRW White painted flange.
TRBL Black painted flange.
LRC 3 Provides compatibility with Lithonia
Reloc® System. Lithonia Reloc System can be installed less this option
with connectors provided by others.
Access above ceiling required.
WLP Lamp (shipped separately).
NOTES
1 Recommended for use with frosted lamp.
2 Not available with LD or LS finish.
3 For compatible Reloc systems, refer to Technical Bulletins tab.
GQ 6
DINC-260
FEATURES
Type
OPTICAL SYSTEM
• Self-flanged, matte-diffuse high-impact polymer
finishing trim with a durable, proprietary vapor
deposition finish.
• Patented Bounding Ray™ Optical Principle design
(U.S. Patent No. 5,800,050) provides lamp before lamp
image and smooth transition from top of the reflector
to bottom.
• One piece trim eliminates mitered flange corners and
inside corner gaps.
• Upper reflector is painted a highly reflective matte
white providing diffuse, even light with high efficiency.
• Proprietary Gotham diffusing lens available.
MECHANICAL SYSTEM
• 16-gauge painted steel mounting/plaster frame
accommodates up to 1-1/2" thick ceiling materials.
• Patent pending adjustable aperture allows 1/4"
adjustments in all directions and up to 5o of rotation
allowing post-installation adjustments to ensure trim to
trim alignment.
• 16-gauge galvanized steel mounting bars with
continuous 4" vertical adjustments are shipped preinstalled. Post installation adjustment possible
without the use of tools from above or below ceiling.
• Secondary housing adjustment system for precise,
final ceiling to flange alignment.
• Galvanized steel junction box with hinged access
covers and spring latch. Three combination 1/2"-3/4"
and one 1/2" knockout for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors
rated for 90°C.
ELECTRICAL SYSTEM
• Medium-base porcelain socket with nickel-plated
screw shell.
• Thermally-activated insulation detector.
LISTING
• Fixtures are UL Listed for thru-branch wiring, Non-IC
recessed mounting and damp locations. Listed and
labeled to comply with Canadian Standards.
Catalog number
.................................
...................................................................................................................................
.................................
...................................................................................................................................
Incandescent Downlights
4" SQAZ
Square Open Reflector
A19 or BT15 Lamp
15-3/16
(38.6)
13-5/16
(33.8)
Aperture:
Ceiling Opening:
Overlap Trim:
4-1/2 (11/4)
5-1/8 (13.0)
5-3/4 (14.6)
6-13/16
(17.3)
All dimensions
are inches
(centimeters).
5-3/4
ORDERING INFORMATION
Example: SQAZ 4AR LD CSL
Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line.
Order accessories as separate catalog numbers (shipped separately).
SQAZ
Series1
SQAZ
Finish
Aperture/Trim color
4AR
4DSR
4PR
4WTR
4WR 2
4BR 2
4PDSR
4WDSR
Clear
Stepped
Pewter
Wheat
White
Black
Pewter stepped
Wheat stepped
(blank)
LD
Semi-specular3
Matte-diffuse
Lens type
(blank) No lens
CSL Concentric
square lens
SOL Solite lens
Options
SDT 4
SDT347 4
SF4
LRC5
CP
SQMT6
Stepdown transformer (277V to 120V)
Stepdown transformer (347V to120V;
75W Max.)
Single fuse
Provides compatibility with Lithonia
Reloc® System. Lithonia Reloc System
can be installed less this option with
connectors provided by others.
Access above ceiling required
Chicago Plenum
Square metal trim
NOTES
1 Maximum wattage: 100W A19.
2 Not available with matte-diffuse finish.
3 Available with WR and BR trim colors and SQMT metal trim option.
4 Single fuse standard when SDT or SDT347 options are ordered.
5 For compatible Reloc systems, refer to Technical Bulletins tab.
6 Not available with stepped trims.
SQAZ 4
DINC-290
Rev 3/10
>VՏˆÌi®Ê>ÌÀˆÝ® Open Downlight
*>}iʣʜvÊÓÊ
4X4
{Ê£ÉÓ¸Ê8Ê{Ê£ÉÓ¸Ê-µÕ>ÀiÊ«iÀÌÕÀiÊ­£®ÊÓÈÉÎÓ7Ê/Àˆ«iÊ/ÕLi
10"
5"
9 5/8"
5 7/8"
Top View
7 1/8"
5
7
4
2
1
3
6
5 1/2"
4 1/2"
1 1/4" Max.
4 1/2"
5 3/4"
5 3/4"
Ceiling Thickness
Ceiling Cutout: 5 1/8" L X 5 1/8" W
Trim Kits
Frame-In Kits
Reflector
Trims
Finish / Flange
Frame-In Kits
Type
Ballast
Input
Voltage
Triple Tube
Wattage
Length
Width
Height
4X4CLW
4X4CLP
-«iVՏ>ÀÊ
i>ÀÊÉÊ7…ˆÌi
-«iVՏ>ÀÊ
i>ÀÊÉÊ*œˆÃ…i`
4X4132HU
4X4132HUEM4E
Non-IC
Non-IC
Electronic
Electronic - Emergency
120/277V
120/277V
26/32W
26/32W
10"
10"
9 1/2"
11"
5 3/4"
5 3/4"
4X4CCLW
œ“vœÀÌÊ
i>ÀÊÉÊ7…ˆÌi
4X4132HCU3
Non-IC
PowerSpec® HDF Dimming 120/277V
26/32W
10"
9"
5 3/4"
4X4CCLP
œ“vœÀÌÊ
i>ÀÊÉÊ*œˆÃ…i`
4X4132HJUM7
Non-IC
Mark 7® Dimming
120/277V
26/32W
10"
9 1/4"
5 3/4"
4X4CCDW
œ“vœÀÌÊ
i>Àʈvv°ÊÉÊ7…ˆÌi
4X4132HJ1MX
Non-IC
Mark 10 ® Dimming
120V
26/32W
10"
9 1/4"
5 3/4"
4X4CCDP
œ“vœÀÌÊ
i>Àʈvv°ÊÉÊ*œˆÃ…i`
4X4132HJ2MX
Non-IC
Mark 10 ® Dimming
277V
26/32W
10"
9 1/4"
5 3/4"
4X4CCGP
i>ÀÊ
œÀÀÕ}>Ìi`ÊÉÊ-ivʏ>˜}i
4X4WHW
7…ˆÌiÊÉÊ7…ˆÌi
Features
1. Reflector Trim:Ê*Ài‡vˆ˜ˆÃ…i`Ê>Õ“ˆ˜Õ“Ê܈̅ʏœÜʈÀˆ`iÃVi˜ViÊVi>ÀÊvˆ˜ˆÃ…°ÊxxcÊ
ۈÃÕ>Ê>˜`ÊÀiviVÌi`ÊVÕ̜vv°Ê"ÛiÀ>«Êv>˜}iÊ>VVœ““œ`>ÌiÃÊ`ˆvviÀi˜ÌÊViˆˆ˜}Ê
ÌÞ«iðÊ*ÀiVˆÃˆœ˜Ê“ˆÌiÀi`Êv>˜}iÊVœÀ˜iÀð
2. Upper Reflector:ʈ}…ÊivvˆVˆi˜VÞ]ʙǯ]Ê-«iVՏ>ÀÊ
i>À°
3. Housing: 22 ga. galvanized formed steel. Centerline notches and holes
vœÀÊVœ˜ÃˆÃÌi˜ÌÊ>ˆ}˜“i˜ÌʜvʓՏ̈«iÊvˆÝÌÕÀiðÊVVœ““œ`>ÌiÃÊViˆˆ˜}ÃÊÕ«Ê̜Ê
£Ê£É{¸Ê̅ˆVŽ°
4. Ballast Assembly:ʜœÀ‡“œÕ˜Ìi`ÊvœÀÊi>ÃÞÊÃiÀۈVi]Ê>œÜÃÊÀi«>Vi“i˜ÌÊvÀœ“Ê
ˆ˜Ãˆ`iʜvÊvˆÝÌÕÀi°
5. Torsiontite Springs:Ê*ÀiVˆÃˆœ˜‡Ìœœi`ÊÃÌiiÊëÀˆ˜}ÃÊÃiVÕÀiÊÀiviV̜ÀÊÌÀˆ“Ê
̜ʅœÕȘ}ÊvœÀʵՈVŽÊ̜œ‡iÃÃʈ˜ÃÌ>>̈œ˜°Ê*œÃˆÌˆÛiÊÌi˜Ãˆœ˜Ê…œ`ÃÊv>˜}iÊ̈}…ÌÊ
against ceiling.
6. J-Box:Ê£{Ê}>°Ê}>Û>˜ˆâi`ÊÃÌii°ÊVViÃÈLiÊvÀœ“ʈ˜Ãˆ`iÊ>˜`ʜÕÌÈ`iʜvÊ̅iÊ
vˆÝÌÕÀi°Ê"ÕÌÈ`iʇLœÝÊ`œœÀʈÃʅˆ˜}i`ÊvœÀÊi>ÃÞÊ>VViÃð
7. Mounting Brackets:Ê£ÈÊ}>°ÊÃÌii°Ê`ÕÃÌ>LiÊvÀœ“ʈ˜Ãˆ`iÊvˆÝÌÕÀi°Ê1̈ˆâiÊÎÉ{¸Ê
œÀʣʣÉӸʏ>̅ˆ˜}ÊV…>˜˜i]Ê£ÉÓ¸Ê/]ʜÀʜ«Ìˆœ˜>Ê“œÕ˜Ìˆ˜}ÊL>Àð
Options & Accessories
Chicago Plenum with Fuse (slow blow):Ê``Ê
ÊÃÕvvˆÝÊ̜ÊÀ>“i‡˜ÊˆÌ]Ê
Vœ˜ÃՏÌÊv>V̜ÀÞÊvœÀÊëiVˆvˆV>̈œ˜Ã°
Mounting Bars / T-Bar Anchor Clips:Ê-iiÊëiVˆvˆV>̈œ˜ÊÅiiÌʺ»°
ÈΣʈÀ«œÀÌÊ,œ>`]Ê>Ê,ˆÛiÀ]ÊÊäÓÇÓäÊUÊ­xän®ÊÈǙ‡n£Î£ÊUÊ>ÝÊ­xän®ÊÈÇ{‡{Ç£ä
We reserve the right to change details of design, materials and finish.
ÜÜÜ°ˆ}…ÌœˆiÀ°Vœ“Ê^ÊÓää™Ê*…ˆˆ«ÃÊÀœÕ«ÊUÊä{ä™
Electrical
1ʈÃÌi`ÊvœÀÊ̅ÀœÕ}…ÊVˆÀVՈÌÊ܈Àˆ˜}Ê܈̅ʓ>ÝʜvÊ­n®Ê œ°Ê£ÓÊ7]ʙäc
ÊÃÕ««ÞÊ
Vœ˜`ÕV̜Àð
Note:ʜÀÊVœ“«iÌiÊL>>ÃÌÊ`>Ì>Ê>˜`ʏ>“«ÉL>>ÃÌÊVœ“«>̈LˆˆÌÞÊÀiviÀÊ̜Ê
ºBallast»ÊëiVˆvˆV>̈œ˜ÊÅiiÌ°
General
1ʏˆÃÌi`ÊvœÀÊ`>“«ÊœV>̈œ˜Ã]Ê°°°7°Ê1˜ˆœ˜Ê>`i°
-«iVՏ>ÀÊ
i>ÀÊw˜ˆÃ…Ê­
®ÊÀiyiV̜ÀÊÌÀˆ“ÃʓiiÌÊ-Ê,*‡£Ê«À>V̈Vi°
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Type:
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
Ideal for a wide variety of low- to medium-height ceiling applications including commercial,
retail and hospitality spaces where an open or damp location lensed fixture is required.
OPTICAL SYSTEM
Aluminum full reflectors are optically designed to maximize lumen output and to provide
superior glare control. Anodized finishes for open reflectors are semi-specular or diffuse
in a variety of colors. Polyester powder coat finishes also are available in white.
Lenses are available in clear flat glass, tempered prismatic glass or polycarbonate to provide
optimal visual comfort and improved aesthetics. Lens is recessed 7/8 (2.2) from flange.
MECHANICAL SYSTEM
Utilizes an extruded socket housing that attaches to the reflector via key hole mount,
which provides superior heat dissipation and extended lamp life. Socket housing also
adjusts to accommodate varying lamp lengths.
Heavy-gauge, die-formed galvanized steel mounting frame. Attached to frame are
vertically adjustable mounting brackets for use with C channels, ½” steel conduit or 16gauge flat bar hangers included, standard. Frames are equipped with galvanized junction box UL Listed for through-wire applications. Junction boxes equipped with (2) ¾”
and (4) ½” conduit knockouts with pryout slots and removable access doors.
Reflector clips packed with reflector for installation on rough-in.
Maximum 1-1/2” ceiling thickness.
ELECTRICAL SYSTEM
Electronic ballast with end of lamp life protection standard. Class P thermally protected
ballast protects against improper contact with insulation. Minimum starting temperature
is 0°F/-18°C.
Rated for #12 AWG conductor thru-branch wiring. Minimum 90° supply wire. Ground
wire provided.
Lamp Socket Base:
DTT 4-pin lamps – 13W (G24Q-1); 18W (G24Q-2); 26W (G24Q-3)
TRT 4-pin lamps – 13W (GX24Q-1); 18W (GX24Q-2); 26W & 32W (GX24Q-3); 42W (GX24Q-4)
LISTING
Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting, damp location,
and to U.S. and Canadian Safety Standards.
ORDERING INFORMATION
Compact Fluorescent Downlighting
6” LP6FN
OPEN REFLECTOR
Vertical 1-Lamp, Double Twin-Tube (DTT)
or Triple-Tube (TRT)
10-3/4
(27.3)
11
(27.9)
13
(33.0)
7-1/2
(19.1)
Specifications
Max. height: 10-3/4 (27.3)
10-3/4
(27.3)
Ceiling opening: 7 (17.8)
Overlap trim: 7-1/2 (19.1)
Length: 13 (33.0)
6-1/4
(15.9)
7-1/2
(19.1)
Width: 11 (27.9)
All dimensions are inches (centimeters).
For shortest lead times, configure product using standard options (shown in bold).
Example: LP6FN 26-42TRT 6O9A MVOLT
LP6FN
Lens type
Reflector/color
Series
Wattage/lamp
LP6FN
13DTT 1
6O9 White open
18DTT
26DTT
13TRT 1
18TRT
6O9A Clear diffuse
open
6O9AZ Clear semispecular open
26-42TRT2
26TRT
32TRT
42TRT
6O9G Gold diffuse
open
6O9GZ Gold semispecular open
6O9PR Pewter diffuse
open
6O9WTZ Wheat semispecular open
NOTES:
1
2
Not available with ADEZ or DMHL.
Not available with DMHL or WLP.
3
4
Electronic multi-volt ballast capable of operating
any line voltage from 120-277V, 50 or 60Hz.
Not available with EL or ELR.
5
6
Add 3” (7.6) to width and 4-1/2” (11.4) to length.
Not recommended for field installation.
Downlighting and Track
(blank) No lens
CGL Clear glass
lens
T73 Tempered
glass
prismatic lens
PCL Clear
polycarbonate
lens
Voltage
3
MVOLT
120
277
3474
Accessories
Order as separate catalog number
SCA6 Sloped ceiling adaptor. Degree of slope
must be specified (10D, 15D, 20D, 25D,
30D) Ex: SCA6 10D.
CTE6 Ceiling thickness extender is used when
ceiling thickness is greater than 1-1/2
(3.8). Maximum thickness 2 (5.1).
Options
ADEZ Advance Mark 10™ electronic dimming
ballast, 120V or 277V. Must be voltage
specific. Minimum dimming level 5%
DMHL Lutron Compact SE™ electronic dimming
ballast, 120V or 277V. Must be wattage and
voltage specific. Minimum dimming level 5%
EL Emergency PSDL3 DL battery pack with
integral test switch. Lens removal
required before EL testing5
ELR Emergency PSDL3 DL battery pack with
remote test switch5
ELHL Iota I-420-R High lumen output emergency
battery pack. Internal test switch provided.
Maximum average lumen output is 1300 (42W)6
ELRHL Iota I-420-EM-B High lumen output
emergency battery pack. Remote test
switch provided. Maximum average lumen
output is 1300 (42W)6
GMF Single slow-blow fuse, must specify voltage
BDP Ballast disconnect plug (meets codes that
require in-fixture disconnect)
RIF1 Radio interference filter
LBH Less barhangers
WLP 35K lamp (shipped separately)
TRW White flange
Sheet #: LP6FN-OPEN
6" Horizontal Triple Open
& Wall Wash Downlight
CFT632HEB
DATE:
TYPE:
FIRM NAME:
PROJECT:
One 26W, 32W, or
42W Triple Tube 4-Pin Lamp
Non-IC Rated
120V, 208V, 240V, 277V, or 347V
Featuring
Ceiling Cutout: 6 1/4"
Maximum Ceiling Thickness: 11/4"
For conversion to millimeters,
multiply inches by 25.4
17-1/2"
W/ EM
Not to Scale
Reflectors
Featuring
14-3/8"
W/O EM
Reflectors
APPLICATIONS:
The CFT632HEB offers a horizontally
lamped compact fluorescent downlight and
wall wash fixture that provides superior
brightness and glare control. The multiwatt multi-volt ballast provides the ability
to change wattages by simply replacing
the lamp. This luminaire is ideal for a
wide variety of low to medium height
ceiling applications including commercial,
retail, and hospitality. The CFT632HEB
is compatible with the Signos6 family of
architectural elements.
HOUSING:
One-piece 18-gauge galvanneal steel
platform. Prewired J-box with snap-on
cover for easy access. Vented at lamp tip
and socket for maximum light output. Same
housing accommodates downlight and wall
wash downlight reflectors.
REFLECTOR:
High purity aluminum Alzak Virtual Source®
iridescence suppressed reflector. Self-trim
standard. Painted white self-trim available.
Baffled units standard with painted white
self-trim.
BALLAST:
One (1) compact fluorescent Class ‘P’
electronic multi-volt (120V through 277V) ballast
suitable for operating 26W, 32W, and 42W
triple tube lamps. EOL protection standard.
Accessible from below ceiling. 347V available
15-3/8"
(specify wattage when ordering).
11-3/4"
LAMP:
One (1) 26W (GX24q-3 base), 32W (GX24q-3
base), or 42W (GX24q-4 base) 4-pin triple tube
compact fluorescent lamp. Lamps furnished by
others or as option below.
SOCKET:
One (1) injection molded socket suitable for
26W, 32W, and 42W triple tube lamps (vented).
INSTALLATION:
Universal adjustable mounting brackets
accommodate 11/2" or 3/4" lathing channel
or 1/2" EMT (by others), or Prescolite 24" bar
hangers (B24 or B6).
W/O EM
6-1/8"
5-1/4"
LABELS:
UL listed or UL/CSA listed with CDN option
for damp locations. Approved for through
wiring.
Non-type I.C.
1-1/4"
5-3/4"
LAMP INCLUDED OPTION:
Specify lamp type T (Triple 4-pin) and
temperature as shown below.
CATALOG NUMBER:
HOUSING
HOUSING OPTIONS
Not available with 42W lamps.
For 26W, 32W, or 42W CFL lamps specify CFT626HEB,
CFT632HEB, or CFT642HEB housing and add desired dimming
option suffix.
4
Not available with MFC or semi-specular finishes.
5
Top access required to service ballast for Chicago Plenum.
6
Not valid with lensed trim.
7
Not available with STF602H55 reflector.
8
T
Contact Technical Support for availability with CFT632HEB55.
9
Available for Osram Sylvania Quick 60+® Limited Warranty
when used with Osram lamp(s).See www.prescolite.com for details.
10
Not available for wall wash
3
7"
EXAMPLE: CFT632HEBDMEM STF602HCG LP32T30K B24
HOUSING OPTIONS
T CFT632HEB
T CDN
T
6" 26W
Canadian electrical
32W/42W
code compliant ballast
disconnect
triple tube, multiT CDN 347V1
volt electronic
Canadian electrical
ballast
code compliant ballast
T CFT632HEB55
T
disconnect
6" 26W
32W/42W triple T CP 5,8
Chicago Plenum. Fixture
tube, multi-volt
construction and/or
electronic
specifications may vary.
ballast, 55
Refer to Chicago Plenum
Degree Cut-off
specification sheets on www.
prescolite.com for details. T
T DM
Electronic Analog Dimming
Ballast to 3%, 4-wire
(specify voltage/wattage;
120V–277V)
1
T
Dimming options not available in 347V.
2
W/EM
7-1/8"
6-1/4"
HOUSING OPTIONS
T
T EM6
SDM
Lutron Compact SE Emergency battery
pack with integral T
Dimming Ballast
test switch and
to 5%, 3-wire line
indicator light
voltage (specify
T
supply voltage/ T FSDFA
Fuse kit installed at
wattage)
factory
HDM 2, 3
Lutron Hi-Lume T RIF1
Radio interference
Dimming Ballast
filter (single circuit)
to 1%, 3-wire line
T MW26
voltage (specify
Max Wattage label,T
supply voltage/
26W
wattage)
T MW32
T
2DM 2, 3
Max Wattage label,
Lutron Tu-Wire
32W
T
Dimming Ballast T SYL9
to 5%, 2-wire line
Osram Sylvania
voltage
Ballast (available
(120V only)
only for standard
EB option)
7DM
3
Advance Mark 7
Dimming Ballast to
5%, 4-wire, 0-10V,
analog
(120V–277V)
(specify wattage)
XDM
Advance Mark 10
Dimming Ballast
to 5%, 2-wire, line
voltage (specify
voltage/wattage)
REFLECTOR
REFLECTOR COLOR
STF602H
6" Alzak reflector
STF602H55
6" Alzak reflector, 55
Degree Cut-off
STF602HLP32T35K
6" Alzak reflector with
lamp (32W, Triple,
3500K)
REFLECTOR FINISH
Blank
Specular
SS
Semi-Specular
MFC7
American MatteTM
ACCESSORIES
T Blank
Clear Alzak
T CG
Champagne Gold
Alzak
T BL
Black Alzak
T WE
Wheat Alzak
T LW
Light Wheat Alzak
T PW
Pewter Alzak
T BC 4,7,10
Painted black cone
T WC 4,7,10
Painted white cone
T B24
Set of two (2) 24" bar
hangers for
T-bar ceilings
T B6
Set of two (2) bar hangers
for ceiling joists up to 24"
centers
T FSDFI
Fuse kit for field
installation
T SCA6D_
Sloped ceiling adapter
(see note on back page)
T Signos66,10
Architectural glass
elements
REFLECTOR OPTIONS Refer to specification
sheets ARCH-SIG-001
through -004
T WT
T
T
T
T
Painted white
self-flange
LAMP ACCESSORIES
BB 4,7,10
Painted black baffle
T LP_____________
WB 4,7,10
-wattage= 26, 32, or 42
Painted white baffle
-type= T (Triple 4-pin)
WW7
Wall wash reflector
-temp=27K, 30K, 35K
TRG
41K (Kelvin)
Trim Ring Gasket
*Example: LP32T41K
(factory installed)
In a continuing effort to offer the best product possible we reserve the right to change, without
notice, specifications or materials that in our opinion will not alter the function of the product.
A Division of Hubbell Lighting, Inc.
Web: www.prescolite.com t Tech Support: (888) 777-4832
ARCH-CFL-001
Linear Light Integration Considerations
• Pre- Engineered fixtures can be installed prior to ceiling tiles,
improving on-site logistics and lowering cost
• ¼” Joint patterns continue around the light fixture
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
3'-11" O.A.
BUILDING WIRE FOR SUPPORT
BY OTHERS
1'-11 1/2"
2"
7 1/8"
4 7/8"
1/2"
BUILDING WIRE FOR SUPPORT
BY OTHERS TIE TO STRUCTURE
2"
7/8" K.O.
FOR FLEX FEED
SUPPORT SPRING
TYP.
15/16" T BAR
TECHSTYLE CEILING
(1) 28WT5
1/8"
TYP.
1/4"
TYP.
3'-11 3/4"
4'-0" GRID CTRS.
CAT. # GB66RCTS-128T5-UNIV ERS-4'-REC/T1SW-ASL-WSG
(3) REQ'D.
(1) 28WT5
7 1/8"
15/16" T BAR
ASL
SUPPORT
SPRING
5 3/4"
BOTTOM VIEW
1 1/8"
ASL
TECHSTYLE CEILING
1/8"
5 3/4"
1/8"
6" GRID CTRS.
CROSS SECTION
GAMMALUX SYSTEMS
SPECIFICATIONS:
BODY: EXTRUDED ALUM. ALLOY 6063-T5
BALLAST: UNIVERSAL V ERS. LESS THAN 10% THD.
LAMPS: 28WT5. BY OTHERS
SHIELDING: ACRYLIC PRISMATIC LENS
MOUNTING: RECESSED MOUNT. 15/16" T BAR
TECHSTYLE CEILING
FINISH: PAINT. STANDARD SEMI GLOSS WHITE
ELECTRICAL: LAMPS ARE WIRED ON ONE CKT
UL
R
LISTED
248 East Arrow Highway, San Dimas, CA 91773
(909) 599-9669
SCALE:
NONE
DATE:
3-17-11
DRAWN BY
REVISED
No.
DESCRIPTION
DATE APPROVED BY
REVISIONS
A. P.
This drawing is the property of GAMMALUX SYSTEMS and is protected by
copyright law. It may only be copied or reproduced with prior, written
authorization from GAMMALUX SYSTEMS.
HUNTER DOUGLAS, TECHSTYLE 6",
LENS, 4', 128WT5
DRAWING NUMBER
B-
GRID LEVELING
BRACKET
GRID CTR. LINE
(1) 28WT5
1 15/16"
2 3/4"
TOP VIEW
1"X 1 1/2" FLANGE
4'-0" GRID CTRS.
1/2"
3'-11" O.A.
1/2"
6"
2"
2"
7/8" DIA HOLE FOR FLEX FEED
3 3/8"
GRID LEVELING
BRACKET
1 15/16"
1/4-20X1"
WING NUT
15/16" T BAR
(1) 28WT5
1/8"
1"X 1 1/2" FLANGE
1/8"
TECHSTYLE CEILING
3'-11 3/4"
4'-0" GRID CTRS.
SIDE VIEW
CAT. # GB33RCTS-128T5-UNIV ERS-4'-T1SW-APL-WSG
1"X 1 1/2" FLANGE
TO CARRY CEILING
GRID LEVELING
BRACKET
3 3/8"
1"X 1 1/2" FLANGE
APL
(1) 28WT5
1 1/8"
2 3/4"
TECHSTYLE CEILING
BOTTOM VIEW
2 3/4"
APL
3"
CROSS SECTION
1/8"
1/8"
UL
R
LISTED
GAMMALUX SYSTEMS
SPECIFICATIONS:
BODY: EXTRUDED ALUM. ALLOY 6063-T5
BALLAST: UNIVERSAL V ERS. LESS THAN 10% THD.
LAMPS: 28WT5. BY OTHERS
SHIELDING: ACRYLIC PRISMATIC LENS
MOUNTING: RECESSED MOUNT. 15/16" T BAR
TECHSTYLE CEILING
FINISH: PAINT. STANDARD SEMI GLOSS WHITE
ELECTRICAL: LAMPS ARE WIRED ON ONE CKT
248 East Arrow Highway, San Dimas, CA 91773
(909) 599-9669
SCALE:
NONE
DATE:
4-12-11
DRAWN BY
REVISED
No.
DESCRIPTION
DATE APPROVED BY
REVISIONS
A. P.
This drawing is the property of GAMMALUX SYSTEMS and is protected by
copyright law. It may only be copied or reproduced with prior, written
authorization from GAMMALUX SYSTEMS.
HUNTER DOUGLAS TECHSTYLE
DRAWING NUMBER
B-
™
Fluorescent
One or Two Lamp 28W/35W T5
One or Two Lamp 54W T5HO
One Lamp 80W T5HO
One or Two Lamp 32W/40W T8
PLATEAU
Armstrong® TechZone™ compatible
USG Logix compatible
Can be modified for Hunter Douglas grids please consult factory.
Recessed
Lensed
online
Find it Fast
Applications: The PL luminaire is a narrow aperture
recessed direct lensed luminaire for individual or
continuous row mounting.
Type:
PLU
6" x 4'
6" x 5'
376
Compatible with standard 15/16" Lay-in, Flush,
9/16" Slot Grid, Flush and 9/16" Lay-in,
Tegular tees placed 6" o.c.
Quantity:
Project:
OLP
FIXTURE/CEILING TYPE
OPTIC
PLU PLATEAU, 6" Recessed
15/16" Lay-In, Flush
9/16" Slot-Grid, Flush
9/16"Lay-In, Tegular
OLP Opal
Lens
LENGTH
LAMPING
64 6" x 4'
65 6" x 5'
End View
Access Plate
BALLAST/VOLTAGE
OPTIONS
U
Universal 120/277V
WF
Whip Flex 3/8" x 6'
1285 (1) 28W T5
347V
14/3 AWG
1545 (1) 54W T5 HO 347
DA_*
Dimming, Analog (0-10V)
WN_* Whip Flex 3/8" x 6'
2285 (2) 28W T5
Dimming, DALI
14/3 AWG (NYC)
2545 (2) 54W T5 HO DD_*
DE_*
Dimming, Lutron ECO-10™
SS
Separate Switching
1328 (1) 32W T8
DH_*
Dimming, Lutron HiLume®
F
Fusing
2328 (2) 32W T8
DSC_* Dimming, Lutron EcoSystem™, EM1_*Standby Battery Pack,
Control Fixture
1 lamp
1355 (1) 35W T5
™
1805 (1) 80W T5 HO DSN_* Dimming, Lutron EcoSystem ,
Non-control Fixture
2355 (2) 35W T5
STDM_* Dimming, Step
1408 (1) 40W T8
2408 (2) 40W T8
* Specify "1" for 120V or "2" for 277V. Some lamp types may not be available.
EM not available for 80W T5 HO lamp.
EM battery pack for 35W T5 lamp only suitable for dry location.
Analog dimming ballast for 80W T5 HO lamp not available for 120V or 347V.
DALI Dimming ballast not available for 80W T5 HO lamp.
Lutron ECO-10 dimming ballast not available for 35W T5, 80W T5 HO or 40W T8 lamps.
Lutron HiLume dimming ballast not available for 28W T5, 35W T5 or 80W T5 HO lamps.
Lutron EcoSystem not available for 80W T5 HO or 40W T8 lamps.
Step Dimming not available for 347V. Also not available for (1) 28W T5, (1) or (2) 54W T5 HO,
(1) or (2) 35W T5, (1) 80W T5 HO, (1) or (2) 40W T8 for any voltage.
5 3/8"
High Reflectance
White Reflector
Side View
5 3/4"
6 1/16"
Lamp
4 1/2"
4 13/16"
6"
C
UL
US
®
LISTED
Suitable for damp locations
NYC Approved
IBEW Union Made
Lead Time? Double-click on http://www.zumtobel.us/PDB?lang=EN&g
id=12419&iso2=US
A = ZOOM! Quick Ship - ships in 2 weeks
B = ships in 4 weeks C = ships in 8 weeks
See page PLU-1A
for common ceiling
mounting details.
1. Housing - 20 gauge cold-rolled
steel. Fixtures have white powder coat
paint finish. Post painted.
2. Sockets - Bi-pin. Twist lock lamp
installation.
3. Lamping - Choices are one or two
28W (4') T5, 35W (5') T5, 54W (4')
T5HO, 32W (4') T8, 40W (5') T8 or
one 80W (5') T5HO fluorescent
lamps. Supplied by others. Access to
lamps is from below the fixture after
the removal of the lens.
OTHER RECESSED TECHZONE/LOGIX COMPATIBLE LUMINAIRES
®
Recessed Bivergence (RB)
Recessed Lensed (RL)
Recessed Louver with Light Chamber (RLLC)
FIF #
288
307
292
3' 11 15/16" –– 4' 11 15/16"
4' (48") –– 5' (60")
4. Reflector - High-reflectance
white finish.
8. Mounting - Fixtures for mounting in lay-in ceilings. Depth of
housing is 6 1/16". Electrical access
5. Optic - Shift and tilt Opal Acrylic
plate in housing top. Fixtures can
Lens (OLP).
be mounted in continuous runs.
6. Ballast - Universal voltage elec- Standard installation via bend out
tronic 120/277V. Ballast is mounted tabs that rest on ceiling tees
alongside fixture.
in housing of luminaire. Ballast
access from below the fixture.
9. Weight - 20 lbs. (4' fixture);
23 lbs. (5' fixture).
7. Dimming - In control fixtures
with Lutron EcoSystem dimming,
control wires are brought to an interface. Consult factory for location of
control wire feed. Consult factory
for specific dimming requirements
other than those listed above.
ECO-10 and EcoSystem are trademarks of Lutron Electronics Co., Inc. HiLume is a registered trademark of Lutron Electronics Co., Inc.
Zumtobel Lighting Inc. ©2008
3300 Route 9W
Highland, NY 12528-2630
TEL (845) 691-6262
(800) 932-0633
FAX (845) 691-6289
8/21/08
www.zumtobel.us
PLU-1
In a continuing effort to offer the best product possible
we reserve the right to change, without notice,
specifications or materials. Technical specification
sheets that appear on www.zumtobel.us are the
most recent version and supersede all other versions
that exist in any other printed or electronic form.
CYLINDRIX
MULTIPLE RECESSED 2 LIGHT
C Y L R -2
LED
2 LT LED
OPTICS:
0-45º x 45º tilt, 360º+ rotation
Available in a variety of beam spreads
LED:
Color Temp Options: 2700K (2725K ±175)
3000K (3045K ±175)
CRI: 82 typ.
Life: 50,000 hrs
Lumen Maintenance: >70% of intial
lumens @ 50,000 hrs
Lumen output: NF 453 typ @ 3000K
FL 440 typ @ 3000K
WF 450 typ @ 3000K
VWF 453 typ @ 3000K
APPLICATION:
Accent and display lighting for retail,
commercial and hospitality environments
CONSTRUCTION:
Stamped steel mounting frame with integral
mounting bars
Thermally protected
Steel ballast housing
Steel upper housing and laser cut trim ring
Die-cast lens holder, optical housing
Formed aluminum yoke
Spun aluminum baffle painted matte black
Extruded aluminum heat sink
Powder coat paint
ELECTRICAL:
Electronic constant current LED driver
120v or 277v input
Dimming down to less than 20%, available on 120v only
with ELV (reverse phase) dimming equipment,
consult factory for approved device list
This product complies with IEEE C62.41 for surge endurance up to 2.5KV. Amerlux recommends using additional surge protection with this unit (supplied by others),
surge damage is not covered by warranty.
MOUNTING:
For use in T-grid or sheet rock ceilings
LABELING:
PROJECT:
Damp location
TYPE:
14 1/2” min - 25” max
4 1/2”
Electrostatic sensitive device,
observe precautions for
handling
45º
3
9 1/4”
10 3/4”
/4”
14 3/4”
Ceiling Cut Out Dimension: 5 9/16” x 10 5/16”
6 11/16”
5 11/16”
17”
ELECTRICAL
2 x10w
Input
Driver
Watts Amps*
Electronic 120v 20
.17
277v 20
.07
Class 2 constant current driver, 700 mA
5
/8”
45º
4 1/2”
6”
A M E R L U X
L E D
(see website for details)
ORDERING INFORMATION:
Model
# Heads
Wattage
Lamp
Type
Ballast
Housing/Head Voltage
Finish
Beam Spreads
Head 1 Head 2
Trim Ring
Finish
Color
Temp
Options/Accessories
CYLR
2
10
LED
E - electronic
WT - white
texture
BT - black
texture
ST - silver
texture
__ - _________
NF
FL
WF
VWF
WT - white
texture
2700
3000
DIM - dimming (120v)
SN - snoot (1/2” length
standard), specify
color (WT, BT, ST)
HEX - hexcell louver
(other RAL)
120
277
NF
FL
WF
VWF
NF - narrow flood, 17º
FL - flood, 28º
WF - wide flood, 34º
VWF - very wide
flood, 48º
Example: CYLR-2-10-LED-E-WT-120-FL-FL-WT-2700
Cat #:
Amerlux reserves the right to change details that do not affect overall function and performance.
23 daniel road, east, fairfield, nj 07044 • P: 973-882-5010 F: 973-882-2605 • www.amerlux.com
RECESSED
JACQUELINE SERIES
RECESSED DIRECT / INDIRECT LUMINAIRE
FIXTURE TYPE
PROJECT
PRODUCT FEATURES
Recessed luminare with an optically enhanced diffuser that creates even low brightness illumination
Shallow 3 1/2” deep body (T8 is 5 1/2” deep)
Available with T5, T5HO, T8 and Biax lamps for 1x4, 2x2, and 2x4 luminares
FIXTURE DETAILS
SPECIFICATIONS
HOUSING
REFLECTOR
SHIELDING
MOUNTING
FINISH
Die formed 20 gauge steel. Knockouts are provided on the back of the housing.
Die formed cold rolled steel. Powder coated white finish, 92% reflectance.
Frosted acrylic lens, lift and shift for easy relamping. Optional lenses available.
Recessed lay–in 9/16” and 15/16” T–grid , 9/16” slot grid, or flanged for sheetrock.
High reflectance powder coated matte white.
PICASSO LIGHTING INDUSTRIES, LLC
561 South 4th Avenue, Mount Vernon, NY 10550 T 914.668.6848 F 914.668.6846 www.picassoltg.com ©2011 Picasso Lighting Industries, LLC
Techstyle HVAC Integration
o Linear Integrated Diffusers
o Square Diffusers
o Round Diffusers
o HVAC Considerations
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
Linear HVAC Integration Considerations
• Pre- Engineered fixtures can be installed prior to ceiling tiles,
improving on-site logistics and lowering cost
• ¼” Joint patterns continue around the light fixture
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/
DWG. NO.
319836
SHEET
1 OF 1
TECHSTYLE PLENUM ASSY
319837-XX-X-XX
NOM
LENGTH
-24- | 24"
-30- | 30"
-36- | 36"
-48- | 48"
-60- | 60"
-72- | 72"
HANGER
BRACKET
ON ENDS
SLOTS
-2- | 2 SLOTS
-3- | 3 SLOTS
2.75 (2 SLOT)
4.06 (3 SLOT)
INLET*
-00- | NONE
-06- | 6"
-08- | 8"
-10- | 10"
-12- | 12"
*SEE
NOTE 2
CROSS
SECTION
SPECIAL TIGHT
FITTING PLENUM
WITH INTEGRATED
MOUNTING BRACKET
.20
REVEAL
MOD – 0.16
END VIEW
.75
TYP
1.13
NOTES:
1. DIFFUSER & PLENUM SHIP
UNASSEMBLED
* 2. MAX TEE HEIGHT FOR USE WITH
12" INLET: 1.5"
A
T07980
JMK
ECO NUMBER
REVISIONS
PRINTED: 4/12/2010
BY
04/10 MJC
DATE
APPVD
TECHSTYLE ML ASSY
319843-XX XX
TILE
.25
Air System Components
REV
11.15
APPROX
5.75
F.O. NO.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
AIR SYSTEM COMPONENTS. ANY
REPRODUCTION IN PART OR AS A
TECHSTYLE
WHOLE WITHOUT THE WRITTEN
USED ON
NEXT ASSY
PERMISSION OF AIR SYSTEM
COMPONENTS IS PROHIBITED.
APPLICATION
MATERIAL
SCREWS ENGAGE
MOUNTING
BRACKETS ON
INSIDE OF PLENUM
NOM
LENGTH
-24 | 24"
-30 | 30"
-36 | 36"
-48 | 48"
-60 | 60"
-72 | 72"
DATE
TITLE
DRWN
DIMENSIONS ARE IN INCHES
JMK
04/10
TOLERANCES:
CHKD
ANGULAR: MACH 1
BEND 2
TWO PLACE DECIMAL
.03
APVD
THREE PLACE DECIMAL .015
MJC
04/10
REMOVE ALL BURRS AND
DWG. NO.
SHARP EDGES
DIMENSIONS IN PARENTHESIS
SLOTS
02 | 2 SLOTS
03 | 3 SLOTS
ML-TZ
TECHSTYLE MOUNTING
BLANKSIZE
FINISH
DO NOT SCALE DRAWING
ARE FOR REFERENCE ONLY
319836
SHEET
1 OF 1
D-OMNI-1.0
OMNI
6-12-09
• Round Neck
Architectural Ceiling Diffusers
Steel • Square Panel • Horizontal Air Pattern
Border Type 3 (Lay-In) Full Face
Ceiling Module A
Nominal Round Duct Size B
B minus 1/8"
C
D
1/4"
E
Ceiling Module A minus 1/4"
Ceiling
Frame
Face Size Nominal Round Duct Sizes
Module
Types
12 x 12
12 x 12
4, 5*, 6, 7, 8
1, 2, 3, 4
20 x 20
20 x 20
4, 5*, 6, 8, 10
1, 3
24 x 24
24 x 24
6, 8, 10, 12, 14, 15
1, 2, 3, 4
All Dimensions Below In Millimeters
300 x 300 300 x 300 102, 127, 152, 178, 203
3
600 x 600 600 x 600 152, 203, 254, 305, 356, 381
3
* Adapter is provided for sizes 4 and 5
Border Type 1 (Surface Mount) Full Face
24 x 24 Module
Ceiling Module A plus 1 1/4"
Ceiling
Nominal Round Duct
C
Module A
Sizes B
12 x 12
4, 5*
2 7/8
12 x 12
6, 7
1 1/8
12 x 12
8
1 1/4
20 x 20
4, 5*
2 3/4
20 x 20
6, 8, 10
3/4
24 x 24
6, 8
1 1/4
24 x 24
10, 12, 14, 15
1 3/8
All Dimensions Below In Millimeters
300 x 300
102, 127
73
300 x 300
152,178
29
300 x 300
203
32
600 x 600
152, 203
32
600 x 600
254, 305, 356, 381
35
E
4
2 1/4
2 3/8
5 1/4
3 1/4
3 3/4
3 7/8
9
9
9
13 5/8
13 5/8
18
18
102
57
60
95
98
229
229
229
457
457
* Adapter is provided for sizes 4 and 5
Ceiling Module A
minus 1"
1/8"
Border Type 1 (Surface Mount) Full Face
20 x 20 Module
18.50
Border Type 2 (Snap-In)
Full Face or Panel Mounted
Ceiling Module A
13/16"
19.75
.10
Dimensions are in inches.
D
D-OMNI-2.0 6-12-09
Other Available Border Types
Check
if provided.
Border Type 4 (Spline) Full Face or Panel Mounted
Ceiling Module A
X
3/8"
3/8"
Border Type 4T (Clip-On Techstyle) Full Face
Mounting
hardware
by others
CEILING MODULE A
CABLE SUPPORT HOLE
CLIP-ON RECESSED SPLINE TILE
Border Type 4V (Recessed Spline) Full Face
1 1/8"
CEILING MODULE A
1/4"
RECESSED SPLINE TILE
CABLE SUPPORT HOLE
Note: If Border 4V is adjacent to a light fixture a gap will be
visible above the backpan. A t-bar extender is available to
fill this void, available from the ceiling manufacturer.
1/2"
1/4"
Borders 4V and 4T has four mounting clips. Two clips on opposed sides with holes to attach mounting wire from above.
Installing and Removing Face Panel • Adjusting Optional Damper
Installing Face Panel
1. Insert the hook brackets into
the slots in the backpan.
2. Rotate the face panel
clockwise until...
3. The hooks positively engage in
the secondary slots in the
backpan.
1.
Removing Face Panel
1. Lift the faceplate towards the
backpan to disengage the hook
brackets from the backpan slots.
2. Rotate the faceplate counterclockwise.
3. Lower the faceplate away from
the backpan.
3.
Adjusting Optional Damper
1. Remove face panel as above.
2. Use flat blade screwdriver to
turn operator shaft at center of
damper.
3. Replace face panel
Submittal Sheet
SPD, ASPD SQUARE PLAQUE DIFFUSER
CM = CEILING MODULE _ _ _ _ ___,,~~
f-•o-------
f-------1:
CEILING OPENING: SEE SCHEDULE
,lrI
r-- D
I
=
NOM. DUCT
CO.D. = D -
I
-j
1/8" (3)
-ill,
i
I·_f
I
r--+1/
:f-----------<-1 i
I
MIN.
1"(25)
tl
K-£"
n ~~w;;
n
If-----
I
I
I
DIFFUSER PLAQUE
IMPERIAL UNITS (Inches)
CM
CEILING OPENING
B
DUCT SIZE
D
24x24
22x22
6,8,1 0, 12, 14,15
D
20x20
1Bx18
6,8,10
D
12x12
4,5,6,7,8
Sl UNITS (mm)
CM
CEILING OPENING
B
DUCT SIZE
D
600x600
549x549
64
152,203,254,305,356,381
D
500x500
449x449
64
152,203,254
D
300x300
249x249
29
102,127,152,178,203
MATERIAL:
FINISH:
D SPD - STEEL CONSTRUCTION
D ASPD - ALUMINUM CONSTRUCTION
(STYLE 31 & 17 ONLY)
D B12 WHITE
(OPTIONAL FINISHES AVAILABLE)
OPTION:
D AFI -
1
1z"
FIBERGLASS WITH FOIL/SCRIM VAPOR BARRIER
INSULATED BACK PAN (31 T-BAR, 20x20 & 500x500 ONLY)
D R6 - MOLDED INSULATED BACK PAN (31 T-BAR, 12x12, 300x300, 24x24 & 600x600 OR
4TS CLIP ON RECESSED SPLINE 24x24)
D BN - BEADED INLET NECK, WITH EXTENDED DEPTH (2 112')
(AVAILABLE FOR SPD ONLY)
ALL METRIC DIMENSIONS ( ) ARE SOFT CONVERTED. IMPERIAL DIMENSIONS ARE CONVERTED TO METRIC AND ROUNDED TO THE NEAREST t.AILLIMETER.
PROJECT:
~
ENGINEER:
SPD, ASPD
1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i t - - - - - " - " - - - - l SQUARE PLAQUE DIFFUSER
CUSTOMER:
SUBMITTAL DATE:
@
Copynght E.H.PRICE LIMITED 201 D
218786
!SPEC. SYMBOL:
2010/10/18
SHEET 1 OF 2
REV K
Submittal Sheet
SPD, ASPD SQUARE PLAQUE DIFFUSER
FRAMES: FOR CM 24x24, 12x12, 600x600 & 300x300
D 2 SNAP-IN
D 31 SURFACE MOUNT
CM - - - -
t-----t----
CM - - - -
~
1.3/16"
(21)
[
rOPENING
~~
~ CM
D 31 T-BAR A
=
1"(25) or 9/16"(14)
D 4 SPLINE
-
1/4"(6)
rd
eM
[
.3/8"(9)
-'---...:..n-"-nnI
!
~­
SPLINES ON TWO OPPOSITE SIDES ONLY
D 4TS CLIP ON RECESSED SPLINE
(24x24 ONLY)
D 17 NARROW MEMBER
1--~•---- CM - - - -
1/8" (.3)
FRAMES: FOR CM 20x20 & 500x500 ONLY
r
D 31 SURFACE MOUNT
f---
~
D 31 T-BAR
CM 20x20(508x508) - - -
18,18(457,457) _
A = 1"(25) or 9/16"(14)
I----
CM 20x20 & 500x500 -
I
I
ALL METRIC DIMENSIONS ( ) ARE SOFT CONVERTED. IMPERIAL DIMENSIONS ARE CONVERTED TO METRIC AND ROUNDED TO THE NEAREST MILLIMETER.
PROJECT:
~
ENGINEER:
SPD, ASPD
1-------------------------------il-----=-..::....---t SQUARE
CUSTOMER:
SUBMITTAL DATE:
@
Copyright E.H.PRICE LIMITED 2010
218786
SPEC. SYMBOL:
2010/10/18
SHEET 2
OF 2
REV K
PLAQUE DIFFUSER
Submittal Sheet
SCD, ASCD SQUARE CONE DIFFUSER
...
~I
CM = CEILING MODULE
I
: CEILING OPENING: SEE SCHEDULE :
I
~
!I
o.D. = D -
1/8"(3)
I
r~/
--
t
I
D =NOM. DUCT -------1
./
---
........!!'_ _ _ _ _
'
1
._
I
1
I
tB
._~
,.
-="---
*1 5/16"
(33)
t
t
\ _ * OPTIONAL 4th CONE
24x24 & 600x600 UNITS ONLY
IMPERIAL UNITS (Inches)
CM
24x24
20x20
D
D
D
c
CEILING OPENING
22x22
18x18
10112X1 0 112
B
2112
2112
11116
1/2
DUCT SIZE
6,8, 10, 12, 14,15
6,8,10
11/B
11116
4,5,6,7,8
CM
CEILING OPENING
B
c
DUCT SIZE
152 203 254 305 356 381
12x12
Sl UNITS (mm)
D
600x600
549x549
64
27
D
500x500
449x449
64
13
152 203 254
D
300x300
249x249
29
27
102 127 152 178 203
MATERIAL:
FINISH:
D SCD - STEEL CONSTRUCTION
D ASCD - ALUMINUM CONSTRUCTION
(STYLES 31 & 17 ONLY)
D B12 WHITE
(OPTIONAL FINISHES AVAILABLE)
OPTION:
W.' FIBERGLASS WITH FOIL/SCRIM VAPOR BARRIER
INSULATED BACKPAN (31 T-BAR, 20x20 & 500x500 ONLY)
D R6 - MOLDED INSULATED BACK PAN (31 T-BAR, 12x12, 300x300, 24x24 & 600x600 OR
4TS CLIP ON RECESSED SPLINE 24x24)
D AFI -
D BN -
BEADED INLET NECK, WITH EXTENDED DEPTH (2ld')
(AVAILABLE ON SCD ONLY)
ALL METRIC DIMENSIONS ( ) ARE SOFT CONVERTED. IMPERIAL DIMENSIONS ARE CONVERTED TO METRIC AND ROUNDED TO THE NEAREST MILLIMETER.
pr1~E!®
PROJECT:
~
ENGINEER:
CUSTOMER:
SUBMITTAL DATE:
@
Copynght E.H .PRICE LIMITED 201 0
SCD,ASCD
SQUARE CONE DIFFUSER
218772
!SPEC. SYMBOL:
2010/10/18
SHEET 1 OF 2
REV K
Submittal Sheet
SCD, ASCD SQUARE CONE DIFFUSER
FRAMES: FOR CM 24x24, 12x12, 600x600 & 300x300
D 2 SNAP-IN
D 31 SURFACE MOUNT
t---CM----
1---CM---
~
13/16"
[
(21)
rOPENING-
~,/}
'-- CM -
D 31 T-BAR A = 1"(25) or 9/16"(14)
1/4"(6) - -
D 4 SPLINE
1:
c/ff'(9)
--'------------~'T-71I
!
d:
~­
SPUN ES ON TWO OPPOSITE SIDES ONLY
D 4TS CLIP ON RECESSED SPLINE
If-•----
(24x24 ONLY)
D 17 NARROW MEMBER
f-----
CM - - - -
CM - - -
1/8"(3)
....L...L..~ l..a............c;;....__---1
__j
FRAMES: FOR CM 20x20
r
& 500x500
ONLY
D 31 SURFACE MOUNT
.
1
l9/16"(14)
D 31 T-BAR
CM 20x20(508x508)
18>18(457>457) _ _
A
1''(25) or 9/16"(14)
t-1•--
CM 20x20 & 500x500 - -
1
I
1
•,/}
C
19 3/4"x19 3/4"
(502x502)
ALL METRIC DIMENSIONS ( ) ARE SOFT CONVERTED. IMPERIAL DIMENSIONS ARE CONVERTED TO METRIC AND ROUNDED TO THE NEAREST MILLIMETER.
PROJECT:
SCD,ASCD
ENGINEER:
SQUARE CONE DIFFUSER
CUSTOMER:
SUBMITTAL DATE:
@ Copyright E.H.PRICE LIMITED 201 D
218772
SPEC. SYMBOL:
2010/10/18
SHEET 2 OF 2
REV K
Submittal
D-R-OMNI
11-1-01
Round Ceiling Diffusers
Steel • Adjustable
Model: R-OMNI
• Horizontal-to-Vertical Discharge Patterns
Ceiling Opening Diameter 'B'
Nominal Round Duct 'D'
Neck Size 'A'
F
OUTER CONE
H
K
WEB
E
G
J
CEILING
LEVEL
PLAQUE
Outside Diameter 'C'
Upper Position
Middle Position
Lower Position
Nominal Round
Duct Size
Dim 'A'
Dim 'B'
Dim 'C'
Dim 'D'
Nominal Round
Duct Size
Dim 'E'
Dim 'F'
Dim 'G'
Dim 'H'
Dim 'J'
Dim 'K'
6"
8"
10"
12"
14"
5 15/16"
7 15/16"
9 15/16"
11 15/16"
13 15/16"
12"
16"
20"
24"
28"
13 1/2"
18"
22 1/2"
27"
31 1/2"
6"
8"
10"
12"
14"
6"
8"
10"
12"
14"
1/16"
3/16"
0
1/8"
1/16"
1/2"
1/2"
1/2"
11/16"
13/16"
5/8"
3/4"
9/16"
5/8"
13/16"
1/16"
1/16"
1/16"
1/16"
1/16"
1 3/16"
1 5/16"
1 1/8"
1 3/8"
1 9/16"
5/8"
5/8"
5/8"
13/16"
11/16"
These dimensions are above ceiling or above the outer cone’s neck.
Adjustment Types
3 Fixed Positions
1
2
3
Available in duct sizes
6 through 14 inches.
1- Upper Position
2- Middle Position
3- Lower Position
D-8.0-S
Dimensions are in inches.
(Please see reverse side.)
Hunter Douglas Architectural Products
One Hunter Douglas Circle
Thornton, CO 80241
866.556.1235
HVAC Considerations for High-Performance Acoustical Panels
It’s important to design effective airflow to minimize potential soiling
The noise absorption of most high-performance acoustical ceilings requires a certain
amount of airflow through the tiles. The panels’ semi-porous nature allows them to
achieve Noise Reduction Coefficient (NRC) values between 0.80 and 1.00. They also
make it important to employ a suitable strategy for supply and return air paths in order to
avoid accelerated soiling of the ceiling tiles.
If air-handling in HVAC systems is not well designed, and pressure equalization does not
occur properly through the exchanges and returns, then air will seek to move through the
acoustical treatment, making it act like an additional dust filter. Over time, this filtering
action will cause the acoustical treatment to become dirty.
By following a few basic guidelines, this potential issue can be avoided by ensuring
minimal pressure differences between the room and the ceiling plenum:
• Design sufficient air return openings in the ceiling plane and/or utilize a ducted
return system. Because they draw air directly from the room instead of from the
ceiling plenum, ducted returns offer an advantage over plenum returns, not only
by further minimizing soiling, but also improving indoor air quality.
• To avoid pressurization of the room, return grilles should be sized for the same or
greater total air volume as is being supplied to the room.
• Pressure can also be balanced by opting for floating acoustical treatments –
which are often more effective acoustically in any case – rather than wall-to-wall
installations.
• Maintenance of air-handling systems and cleaning of system filters as
recommended by manufacturers will further reduce the chance of soiling and will
add to overall performance and energy efficiency of the HVAC system.
• To further optimize panel appearance and cleanliness, avoid unequal pressures
and risk of soiling during construction by scheduling panel installation as late as
possible in the project, so that all dust producing activities are completed and
the space is cleaned of loose dust and dirt
• Careful handling of the tiles is also recommended during installation and when
the plenum needs to be accessed. Use of clean cotton gloves is an effective way
to ensure good panel appearance.
TRIM PROFILES FOR TECHSTYLE CLIPPED: TF, WT, A-MOUNT
12"
10"
8"
53
4"
6"
4"
1"
15
8"
2"
1"
18
1"
18
1
2"
TSAMWALL
A-MOUNT
PERIMETER
27
8"
3"
1
2"
1
2"
WT1
WT2
3"
8
FF3
3"
4
TF2
3"
4
TF4
WALL TRIMS
Techstyle Acoustical Ceilings
are to be installed on standard
commercial 15/16th T-grid as
indicated in this detail. The
T-grid is to be installed true
and square in accordance with
CISCA
guidelines,
ASTM
C635-91 and C636-92
3"
4
TF5
3"
4
TF6
3"
4
TF8
3"
4
TF10
3"
4
TF12
FLOATING TRIMS
One Hunter Douglas Circle Thornton, CO 80241-3312
Phone: (866) 556-1235 Fax: (720) 872-7850
www.hunterdouglascontract.com/ceiling
DRAWING TITLE : Trim Profiles for Techstyle Clipped
DRAWING NUMBER: 1120
ALL RIGHTS RESERVED. THIS DRAWING IS THE PROPERTY OF HUNTER DOUGLAS AND MAY BE USED ONLY IN CONJUNCTION WITH CONSTRUCTION PROJECTS UTILIZING
HUNTER DOUGLAS PRODUCTS. THIS DETAIL MAY NOT APPLY TO ALL CONDITIONS OR CONSTRUCTION SITUATIONS. FOR NON-TYPICAL CONDITIONS, CONSULT HUNTER DOUGLAS.
COLOR:
WHITE
RADIANT WHITE
BLACK
CUSTOM COLOR
QUANTITY:
CUSTOMER:
PROJECT NAME:
APPROVED:
P
DATE:
R
L
Floating Trim Type
TF2
TF4
TF5
inches
STANDARD 120
inches
Mark if part of complete circle
Outside Corner Floating Trim
PRODUCT CATEGORY: Techstyle Acoustical Ceilings
1 Hunter Douglas Circle
DRAWING #:
SAP #
Thornton, CO 80241
800-727-8953
fax: 720-872-7850
www.hunterdouglascontract.com
R
R
M
E T
A L
C
E I
L I
N G
S
W
O
O
D
C
E
I
L
I
N
G
S
R
A C O U S T I C A L
All rights reserved. This drawing is the property of Hunter Douglas and may be
used only in conjunction with construction projects utilizing Hunter Douglas
products. This detail may not apply to all conditions or construction situations.
For non-typical conditions, consult Hunter Douglas.
C E I L I N G S
drawn:
date:
section:
page:
COLOR:
WHITE
RADIANT WHITE
BLACK
CUSTOM COLOR
QUANTITY:
CUSTOMER:
PROJECT NAME:
APPROVED:
P
DATE:
R
L
Floating Trim Type
TF2
TF4
TF5
inches
STANDARD 120
inches
Mark if part of complete circle
Inside Corner Floating Trim
PRODUCT CATEGORY: Techstyle Acoustical Ceilings
1 Hunter Douglas Circle
DRAWING #:
SAP #
Thornton, CO 80241
800-727-8953
fax: 720-872-7850
www.hunterdouglascontract.com
R
R
M
E T A
L
C
E I
L I
N G
S
W
O
O
D
C
E
I
L
I
N
G
S
R
A C O U S T I C A L
All rights reserved. This drawing is the property of Hunter Douglas and may be
used only in conjunction with construction projects utilizing Hunter Douglas
products. This detail may not apply to all conditions or construction situations.
For non-typical conditions, consult Hunter Douglas.
C E I L I N G S
drawn:
date:
section:
page:
Techstyle CAD Details
o Wall Trims
o Floating Trims
o Direct Mount
o Lights
o HVAC
o Sprinklers
http://www.hunterdouglascontract.com/ceilings/acousticalsolutions/