TERRESTRIAL ANTENNAS
ZenitHD aerial passive or active on 21/60 channel
New DESIGN + New CONSTRUCT
P/N 256003 / 256006 / 256009 / 256013 / 256016 / 256019
The ZenitHD aerial are optimized for terrestrial digital video broadcast signal over the new channels
21-60 bandwith. They help protecting against LTE signals.
Focus is on built quality, with a fully streamlined undeformable dipole. The director elements are
doubled resulting in a better phase management, improving the gain and the impedance.
Reflectors have a parabolic shape, using aluminium stamping technology, providing an efficient radio
protection, increasing front-to-back ratio. They are foldable allowing fast mount and unmount without
tools.
The product range include also low-noise, low-consumption pre-amplified antennas to linearize the
gain over the bandwith. The integrated amplifier auto switch to pass-through when unpowered.
PICTURES
PERFORMANCES
Doubled elements for phase
management
Registred pattern
Patent pending
3 elements
6 elements
Aluminium reflector cutted
and stamped
Snapping Stripline printed dipole
Boom assembling with snap
9 elements
TONNA Electronique
36, avenue Hoche - BP 1026 - 51686 REIMS Cedex 2 - France
Tél : +33 326 05 50 50 - Fax : +33 326 05 50 95
www.tonna.com
Pre-assembled for an easy set-up no
tools required
SPECIFICATIONS
PART NUMBER
Nb of directors elements
Type
ELECTRICAL SPECIFICATIONS
Channels
Bandwith
Gain
Front to back ratio
Beamwidth
MECHANICAL SPECIFICATIONS
Length
Weight
Mast clamp
Effective wind load (130 km/h) H
Effective wind load (130 km/h) V
256003
3
Passive
256006
6
Passive
256009
9
Passive
256013
3
Active
256016
6
Active
256019
9
Active
21 / 60
470 / 790
11,1 - 13,2
32 à 37
2 x 21
21 / 60
470 / 790
11,2 - 13,9
32 à 37
2 x 18
21 / 60
470 / 790
11,3 - 14,8
32 à 37
2 x 16
21 / 60
470 / 790
30,5 - 31
32 à 37
2 x 21
21 / 60
470 / 790
31,5 - 32
32 à 37
2 x 18
21 / 60
470 / 790
32,5 - 33
32 à 37
2 x 16
MHz
dBi
dB
°
0,52
1,5
35 / 60
2,4
11,1
0,85
1,8
35 / 60
3,6
15,6
1,25
2
35 / 60
5,4
22,4
0,52
1,5
35 / 60
2,4
11,1
0,85
1,8
35 / 60
3,6
15,6
1,25
2
35 / 60
5,4
22,4
m
kg
mm
daN
daN
GAIN RESPONSE
Gain response active antenna
Gain response passive antenna
34
16
Gain Antennes ZenitHD versions sèches
15
35
Horizontal Opening Diagram
35
ZenitHD 9 sèche
Gain Antennes ZenitHD versions amplifiées
33
ZenitHD 9 amplifiée
ZenitHD 6 amplifiée
ZenitHD 6 sèche
ZenitHD 3 sèche
30
14
10
Gain dBi
20
13
12
5
11
0
-5
10
-10
475 MHz
500 MHz
9
ZenitHD 3 amplifiée
32
25
GAIN DBi
GAIN DBi
15
Gain dBi
25
20
30
31
15
10
ZénitHD 3
5
ZénitHD 6
0
ZénitHD 9
-5
30
ZénitHD 3 Amp
29
ZénitHD 6 Amp
ZénitHD 9 Amp
28
-10
525 MHz
550 MHz
470
MHz
575 MHz
500
MHz
600 MHz
625 MHz
550
MHz
650 MHz
675 MHz
600
MHz
700 MHz
725 MHz
650
MHz
750 MHz
775 MHz
700
MHz
787,5 MHz
800 MHz
750
MHz
825 MHz
860 MHz
800
MHz
475 MHz
27
500 MHz
525 MHz
470
MHz
550 MHz
575 MHz
500
MHz
600 MHz
550
MHz
625 MHz
650 MHz
600
MHz
675 MHz
700 MHz
650
MHz
725 MHz
700
MHz
750 MHz
775 MHz
787,5 MHz
750
MHz
800 MHz
825 MHz
860 MHz
800
MHz
PHASE SHIFT MANAGEMENT
ZenitHD output signal
Corrected phase difference, improved gain
Standard aerial output signal
Uncorrected phase difference
Improved BER and MER, SWR < 1.5
STRIPLINE TECHNOLOGY
AUTO-SWITCHABLE AMPLIFIER
FILTER
AMPLI 20 dB
INPUT
OUTPUT
PILOT SWITCH
REGULATED
POWER SUPPLY
Amplifier synoptic
Noise factor < 1 dB
99 % RECYCABLE PRODUCT
All used materials are recycable : aluminium, steel, plastics and cardboard. Compliant with CE, RoHS and DEEE.
NON INCLUDED ACCESSORIES
Passive version : non filtered active dipole, P/N 401560 - Gain 29dB.
Active version : either a power inserter 1 output (wich takes place behind the TV set P/N 301087) or a standard power-supply 2 outputs
with wall mounting P/N 301055.
TONNA Electronique
36, avenue Hoche - BP 1026 - 51686 REIMS Cedex 2 - France
Tél : +33 326 05 50 50 - Fax : +33 326 05 50 95
www.tonna.com
Non-binding document. Doc. n° 143060 – Ver. 2014/10/29
STRIPLINE allows the radiation diagram to operate on the whole dipole
circuit.