Plumbing Fittings and Accessories
Magnetic plugs are a small investment that can help to prevent
damage and wear in engines and gearboxes. Use them to
replace standard oil gallery plugs and drain plugs in oil tanks,
cooling systems and transmissions. They provide an easy way
to check for unusual wear which may precede a failure.
Hex Recessed Socket, NPT & Metric Magnetic Plugs
1⁄ -27
8
1⁄ -18
4
3⁄ -18
8
1⁄ -14
2
3⁄ -14
4
NPT, Bar Magnet, A = 0.79 inch . . . . . . . . . Part No. 1010 . . . . . . . . . . . . $1.99
NPT, Bar Magnet, A = 0.84 inch . . . . . . . . . Part No. 1011 . . . . . . . . . . . . $1.99
NPT, Bar Magnet, A = 0.82 inch . . . . . . . . . Part No. 1012 . . . . . . . . . . . . $1.99
NPT, Bar Magnet, A = 1.00 inch . . . . . . . . . Part No. 1013 . . . . . . . . . . . . $2.49
NPT, Bar Magnet, A = 0.84 inch . . . . . . . . . Part No. 1014 . . . . . . . . . . . . $3.99
1"-11 NPT, Bar Magnet, A = 0.99 inch . . . . . . . . . Part No. 1015 . . . . . . . . . . . . $3.99
24mm for most Hewland and Webster Cases . . . . . Part No. 1410-C03 . . . . . . . $19.99
Cap Screw Type, Straight Thread Magnetic PlugsThese plugs require a sealing washer - see below and page 81 for additional options.
1⁄ -20 UNF, Bar Magnet, A = 0.87 inch . . . . . . . . . Part No. 1020 . . . . . . . . . . . . $2.29
2
5⁄ -18 UNF, Bar Magnet, A = 0.78 inch . . . . . . . . . Part No. 1021 . . . . . . . . . . . . $9.99
8
3⁄ -16 UNF, Bar Magnet, A = 0.89 inch . . . . . . . . . Part No. 1022 . . . . . . . . . . . . $4.49
4
7⁄ -14 UNF, Disc Magnet, A = 0.78 inch . . . . . . . . Part No. 1023 . . . . . . . . . . . . $8.49
8
7⁄ -18 NS, Disc Magnet, A = 0.78 inch . . . . . . . . . . Part No. 1024 . . . . . . . . . . . . $4.49
8
1"-18 NS, Disc Magnet, A = 0.89 inch. . . . . . . . . . Part No. 1025 . . . . . . . . . . . . $4.49
BSP Adapter Fittings (British Pipe Threads)
Use these fittings to adapt to BSP female ports. British threaded ports generally use an o-ring
to seal the face of the port as long as there is a chamfer on the port face to accept the o-ring.
If the port face isn't chamfered, a crush washer or a dowty seal is used to seal the fitting.
BSP Male to NPT Male Adapters
1⁄
8
1⁄
8
1⁄
4
1⁄
2
BSP Male to 1⁄8 NPT Male - Steel. . . . . . . . . . . . Part No. 3230-2-2NPT . . . . . $5.69
BSP Male to 1⁄4 NPT Male - Steel. . . . . . . . . . . . Part No. 3230-2-4NPT . . . . . $6.99
BSP Male to 1⁄8 NPT Male - Steel. . . . . . . . . . . . Part No. 3230-4-2NPT . . . . . $6.49
BSP Male to 1⁄2 NPT Male - Steel. . . . . . . . . . . . Part No. 3230-8-8NPT . . . . $11.99
1⁄
8
3⁄
8
1⁄
2
1⁄
2
1⁄
2
5⁄
8
BSP Male to 3AN Male - Steel . . . . . . . . . . . . . . Part No. 3230-2-3AN . . . . . . $5.99
BSP Male to 10AN Male - Steel . . . . . . . . . . . . . Part No. 3230-6-10AN . . . . . $7.59
BSP Male to 8AN Male - Aluminum . . . . . . . . . Part No. 3230-8-8AN . . . . . $11.69
BSP Male to 10AN Male - Aluminum . . . . . . . . Part No. 3230-8-10AN . . . . $10.99
BSP Male to 12AN Male - Aluminum . . . . . . . . Part No. 3230-8-12AN . . . . $13.99
BSP Male to 10AN Male - Aluminum . . . . . . . . Part No. 3230-10-10N. . . . . $19.99
3⁄
8
1⁄
2
1⁄
2
1⁄
2
1⁄
2
5⁄
8
1⁄
2
BSP Male to 1⁄2 BSP Male - Steel . . . . . . . . . . . . Part No. 3231-6-8BSP . . . . . $5.49
BSP Male to 1⁄2 BSP Male - Steel . . . . . . . . . . . . Part No. 3231-8-8BSP . . . . . $5.59
BSP Male to 1⁄2 BSP Male - Aluminum . . . . . . . Part No. 3203-8-8BSP . . . . $10.89
BSP Male to 5⁄8 BSP Male - Steel . . . . . . . . . . . . Part No. 3231-8-10BSP . . . . $5.99
BSP Male to 5⁄8 BSP Male - Aluminum . . . . . . . Part No. 3203-8-10BSP . . . $10.89
BSP Male to 5⁄8 BSP Male - Steel . . . . . . . . . . . . Part No. 3231-10-10BSP . . . $5.89
BSP Male Plug - Steel. . . . . . . . . . . . . . . . . . . . . Part No. 3203-8-Plug . . . . . . $9.59
BSP Male to AN Male Adapters
PLUMBING
BSP Male to BSP Male Adapters (and BSP plug)
Sealing Washers for BSP Fittings
Aluminum Crush Washers for BSP Ports:
For 1⁄2 BSP ports . . . . . . . . . . . . . . . . . . . . . . . . . . . Part No. 167-31. . . . . . . . . . . $1.89
Works best if the adapter has a shoulder to center the washer.
Dowty Sealing Washers for BSP Ports (steel with bonded rubber insert):
Will not seal reliably if port is chamfered.
For 3⁄8 BSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part No. 3240-3⁄8 BSP . . . . . . $1.79
For 1⁄2 BSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part No. 3240-1⁄2 BSP . . . . . . $1.79
For 5⁄8 BSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part No. 3240-5⁄8 BSP . . . . . . $2.49
O-ring Seal for Chamfered BSP Ports (Buna N):
For 3⁄8 BSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part No. 3243-3⁄8 BSP . . . . . . . 79¢
For 1⁄2 BSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part No. 3243-1⁄2 BSP . . . . . . . 79¢
Metric Adapter Fittings
Special 26mm and 30mm Porsche Adapter Fittings
It is easy to connect an auxiliary oil cooler to a Porsche engine. These male and female 26mm and 30mm (both with 1.5mm
thread pitch) aluminum adapters convert the Porsche fittings to male 12AN or 16AN.
26mm x 1.5mm Male to 12AN Male Adapter, Aluminum (26mm = 1.024 inch). . . Part No. 1277-12AN . . . . . .$27.49
26mm x 1.5mm Female to 12AN Male Adapter, Aluminum . . . . . . . . . . . . . . . . . . . Part No. 1278-12AN . . . . . .$34.99
30mm Female to 12AN Male 30mm Male to 12AN Male
Adapter, Aluminum
Adapter, Aluminum
Part No. 1219-12AN
Part No. 1218-12AN
Part No. 1218-12AN . . . . . .$28.99
Part No. 1218-16AN . . . . . .$28.99
Part No. 1219-12AN . . . . . .$38.99
Part No. 1219-16AN . . . . . .$38.99
Other Metric to AN Adapter Fittings
Two views of
metric to AN
adapter
Part No. 3265-34
We have been expanding our selection of metric plumbing adapters. If you're looking for a size that's not listed here, please
ask for it. We may already have it in stock.
14mm x 1.5mm Male to 8AN Male Adapter, Steel (14mm = 0.551 inch) . . . . . . . . Part No. 3265-33 . . . . . . . . .$14.99
16mm x 1.5mm Male to 8AN Male Adapter, Steel (16mm = 0.630 inch) . . . . . . . . Part No. 3265-34 . . . . . . . . .$13.99
18mm x 1.5mm Male to 8AN Male Adapter, Steel (18mm = 0.709 inch) . . . . . . . . Part No. 3265-35 . . . . . . . . .$13.99
For other metric brake adapters, carburetor adapters or special gauge adapters,
please see the appropriate section of our
catalog.
w!
e
N
Two views of a special
Setrab Oil Cooler
Adapter (sold individually - not per pair)
Part No. 3265-37
Note: Face of hex is
recessed for o-ring.
80
30mm x 1.5mm Male to 12AN Male Adapter, Aluminum (30mm = 1.181 inch). . .
30mm x 1.5mm Male to 16AN Male Adapter, Aluminum . . . . . . . . . . . . . . . . . . . . .
30mm x 1.5mm Female to 12AN Male Adapter, Aluminum . . . . . . . . . . . . . . . . . . .
30mm x 1.5mm Female to 16AN Male Adapter, Aluminum . . . . . . . . . . . . . . . . . . .
Miscellaneous Metric Adapter Fittings
We have been expanding our selection of metric plumbing adapters. If you're looking for a size that's not listed here, please
ask for it. We may already have it in stock.
10mm x 1.0mm male to 1⁄8" NPT female, Brass (with 10mm copper crush washer) Part No. AM2265 . . . . . . . . .$8.99
5⁄ -18 UNF Female to M16 x 1.5 Male fitting, Brass . . . . . . . . . . . . . . . . . . . . . . . . . Part No. AM2275 . . . . . . . . .$8.99
8
Special 22mm Adapter Fittings for Setrab Oil Coolers (o-ring included)
We don't currently stock Setrab oil coolers but we have had requests for the special adapters that are used on Setrab coolers.
If you decide to change the size of the hoses going to your Setrab cooler, you can use these fittings instead of replacing the
entire cooler. Note: These fittings are sold individually (not as a pair).
22mm x 1.5mm Male to 8AN Male Adapter, Aluminum (22mm = 0.866 inch). . . . Part No. 3265-36 . . . . . . . . . .$8.29
22mm x 1.5mm Male to 10AN Male Adapter, Aluminum (22mm = 0.866 inch). . . Part No. 3265-37 . . . . . . . . . .$8.29
22mm x 1.5mm Male to 12AN Male Adapter, Aluminum (22mm = 0.866 inch). . . Part No. 3265-38 . . . . . . . . . .$8.29
Pegasus Auto Racing Supplies
2475 South 179th Street