The patented design allows for versatility and possibilities in the confines of the cockpit. The Flipper creates panel space where none previously existed
• Convenient stowable monitor displays EVS on the LCD that will enhance the safety of your operation
• No requirement to cut new panel space for the installation or upgrade to an expensive MFD or FMS
• Folds up to a horizontal stowed position when not in use. It uses just over 1/2 inch of visible panel space
• One button selects video source- EVS, Weather, or Camera. The video intensity backlighting can be adjusted by the BRT/DIM buttons located on the side of the display
• Power supply and video input located in the Detached
Electronics Box (DEB), which can be positioned up to 9 feet from the Flipper (up to 15 foot cable available)
• Displays 2 composite video and 1 VGA input
• Both units are available in top or bottom mount configurations to mount above or underneath the glare shield and 90 degrees or 270 degrees of rotation from the stowed position. The units are available in gray or black
DO-160 TESTED FAA/PMA Approved
FD90AID
Shown: Top Mount
This is a sample of a top mount FD90AID.
A top mount unit always mounts on the topside of the glareshield
This is a sample of a bottom mount FD90AID.
A bottom mount unit always mounts on the underside of the glareshield
DO-160 TESTED
Dimensions (Display)
Dimensions (DEB)
Weight (Display)
Weight (DEB-SM)
Weight (DEB Cable)
Materials
Viewing Angles
Aspect Ratio
Resolution
Supported Resolution
Brightness
Display Type
6.1” (W) x .66” (H) x .4.75” (D)
5.7” (W) x 1.14” (H) x 5.05” (D)
FD90AID - 1.22 lb, FD270AID - 1.20 lb
1.1 lb
.65 lb
Aluminum
180o on both axis
4:3
640x480
1280x1024
600 cd/m 2
5.0487” TFT color LCD
Power
PC Input
Video Input
Video Type
12 - 28V @.5Amps - .3Amps
Analog RGB
2 Composite Video
VGA, NTSC/PAL
FD270AID
Shown: Bottom Mount
This is a sample of a top mount FD270AID.
This top mount unit always mounts on the topside of the glareshield
This is a sample of a bottom mount FD270AID.
A bottom mount unit always mounts on the underside of the glareshield
CURRENT AS OF 12/27/2010

Allows unit to swivel left and right for viewing between pilot and co-pilot
• Available for :
FD90AID-T
FD90AID-B
FD90AID-ST
• Adds .175” height to unit and minimal weight
DO-160 TESTED
Dimensions (Display) 5.87” (W) x .165” (H) x 3.98” (D)
The slide mount is a variant of our popular Flipper. Perfect for installation on top of a glareshield
• This monitor is completely enclosed in a box. It deploys
toward the user and then is rotated up 90 degrees
for viewing
• When not in use, the Flipper slides into its case where
approximately 1 inch is visible. In this stowed position,
power is automatically disconnected from the display
• Power supply and video input located in the Detached
Electronics Box (DEB) positioned 9 feet from the Flipper
(up to 15 foot cable available)
• Displays 2 composite video and 1 VGA input
FD90AID-SMT
DO-160 TESTED
Dimensions (Display)
Dimensions (DEB)
Weight (Display)
Weight (DEB)
Weight (DEB Cable)
Materials
Viewing Angles
FAA/PMA Approved
6.7” (W) x 1.07” (H) x 7.00” (D)
5.7” (W) x 1.14” (H) x 5.05” (D)
3.10 lbs
1.1 lb
.65 lb
Aluminum
180o on both axis
Creates panel space where none previously existed, providing an excellent opportunity to bring EVS video, satellite weather, or any other VGA/Composite source into the cockpit with a low-profile, stowing display
• Power supply and video input located in the Detached
Electronics Box (DEB) positioned 9 feet from the Flipper
(up to 15 foot cable available)
• The display can be ordered in 2 different orientations;
with the control buttons on the right (FDPMAID-T) or
the left (FDPMAID-B)
• The units are available in gray or black
DO-160 TESTED
Dimensions (Display)
Dimensions (DEB)
Weight (Display)
Weight (DEB-SM)
Materials
Viewing Angles
FDPMAID
5.19” (W) x 4.78” (H) x .690” (D)
5.70” (W) x 1.60” (H) x 5.05” (D)
1.1 lbs
1.1 lbs
Aluminum
180o on both axis

Designed for installation in piston general aviation aircraft, helicopters, and any other aircraft with limited panel space
• Can be used to display Enhanced Vision Systems (EVS), Satellite Weather,
or a standard video camera. Unlike the standard Flipper, the LG version is
contained in a single box for easy installation
• Designed to mount on top of the glareshield and flips up 90 degrees
for viewing. The Flipper-LG is automatically powered off when stowed
• The black LCD provides pilots with the ability to dim the backlighting
at night without losing picture quality and saving the pilot’s night vision
• Pilots can easily change the backlighting intensity by pushing the dim/
bright buttons on the face of the display
• Composite input (additional inputs available, contact Flight Display
Systems for additional information)
FD90AID-LG
DO-160 TESTED FAA/PMA Approved
Dimensions (Display Enclosure) 6.1”(W) x .70”(H) x 10.00”(D)
Dimensions Deployed
Weight (Display)
Materials
Viewing Angles
6.1”(W) x 4.82”(H) x 10.00”(D)
2.4 lbs
Aluminum
180o on both axis
Designed for installation in piston general aviation aircraft, helicopters, and any other aircraft with limited panel space
• Can be used to display Enhanced Vision Systems (EVS), Satellite Weather,
or a standard video camera. Unlike the standard Flipper, the ST version is
contained in a single box for easy installation
• Designed to mount on top or underneath the glareshield and flips
90 degrees for viewing. The Flipper-ST is automatically powered off
when stowed
• The black LCD provides pilots with the ability to dim the backlighting at
night without losing picture quality and saving the pilot’s night vision
• Pilots can easily change the backlighting intensity by pushing the
dim/bright buttons on the face of the display
• Composite input (additional inputs available, contact Flight Display
Systems for additional information)
FD90AID-ST
DO-160 TESTED FAA/PMA Approved
Dimensions (Display Enclosure) 6.1”(W) x 1.375”(H) x 5.2”(D)
Dimensions Deployed
Weight (Display)
Materials
Viewing Angles
6.1”(W) x 5.45”(H) x 5.2”(D)
2.3 lbs
Aluminum
180o on both axis
Specifically designed for installation in helicopters to be mounted on the side of the instrument panel, glareshield or sidewall, but is not limited to helicopters
• Can be used to display Enhanced Vision Systems (EVS), Satellite Weather,
or any composite video source. The Hinge Mount Flipper is contained in a
single box with a 20 inch connector cable for ease of installation
• Mounts on the left or right side of an instrument panel or sidewall. The
display swings out up to 150 degrees from its stowed position, and tilts
10 degrees forward and aft for adjustment of optimal viewing angle.
• Stows flush against it’s mounting plate and only occupies 1.38 inch of
visible space
• Composite input (additional inputs available, contact Flight Display
Systems for additional information)
FD90AID-HMT
DO-160 TESTED
Dimensions (Display Enclosure) 7.40”(W) x 5.50”(H) x 1.38”(D)
Dimensions Deployed
Weight (Display)
Materials
Viewing Angles
7.40”(W) x 5.50”(H) x 7.97”(D)
2.4 lbs
Aluminum
180o on both axis

Creates panel space where none previously existed, providing an excellent opportunity to bring EVS video, satellite weather, or any other VGA/Composite source into the cockpit with a low-profile, stowing display
• “Face-Out” display, which the pilot can open 90 degrees to be viewed
• Available in top or bottom mount configurations; FD90AID-7-T for mounting on the top of the glare shield and FD90AID-7-B for mounting on the underside of the glare shield
• Larger than most MFDs at a fraction of the cost!
• Single piece unit, no detached electronics box required
• Extremely thin unit does not obstruct pilots view when stowed
• Displays 2 compostie video and 1 VGA input
• Automatically turns off when closed
FD90AID-7
DO-160 TESTED
Dimensions Closed
Dimensions Deployed
Power
Weight
Materials
7.8”(W) x .89”(H) x 5.0”(D)
7.8”(W) x 4.7”(H) x 5.0”(D)
12 - 28V @.6Amps - .3Amps
1 lb 8 oz
Aluminum
Creates panel space where none previously existed, providing an excellent opportunity to bring EVS video, satellite weather, or any other VGA/Composite source into the cockpit with a low-profile, stowing display
• “Face-Out” display, which the pilot can open 90 degrees to be viewed
• Available in top or bottom mount configurations; FD90AID-10-T for mounting on the top of the glare shield and FD90AID-10-B for mounting on the underside of the glare shield
• Larger than most MFDs at a fraction of the cost!
• Single piece unit, no detached electronics box required
• Extremely thin unit does not obstruct pilots view when stowed
• Displays 2 compostie video and 1 VGA input
• Automatically turns off when closed
FD90AID-10
DO-160 TESTED
Dimensions Closed
Dimensions Deployed
Power
Weight
Materials
10.5”(W) x .89”(H) x 6.6”(D)
10.5”(W) x 6.36”(H) x 6.6”(D)
12 - 28V @.6Amps - .3Amps
2 lbs 12 oz
Aluminum