V is h ay I n t e r t e c h n o l o g y, I n c .
AND TEC
I
INNOVAT
O L OGY
PR Series
N
HN
THIN FILM RESISTORS
O
19
62-2012
Resistors - Precision Thin Film Chip Arrays
High Precision Thin Film Resistor, Surface-Mount Arrays
(1206, 0805, and 0603 Case Sizes)
Key Benefits
•
•
•
•
Resistance range 100 Ω to 1 MΩ
Low profile: 0.4 mm height
Small overall size (1 mm, 1.35 mm, and 1.82 mm pitches)
Ratio tolerance: ± 0.02 %
APPLICATIONS
• Instrumentation amplifiers
• Precision voltage dividers
• Bridge networks circuitry
Resources
• Datasheet: PR Series - http://www.vishay.com/doc?53039
• For technical questions contact thinfilm@vishay.com
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT9117-1201
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V is h ay I n t e r t e c h n o l o g y, I n c .
AND TEC
O L OGY
INNOVAT
I
N
HN
THIN FILM RESISTORS
O
PR Series
PR100,
PR135, PR182
19
62-2012
PR100,Vishay
PR135,
PR182
Dale
Thin Film
www.vishay.com
PR100, PR135, PR182
www.vishay.com
Vishay Dale Thin Film
HighPrecision
PrecisionResistor
Thin Dale
Film
Resistor,
Surface-Mount
Vishay
Thin
Film
High
Thin
Film, Surface
Mount Arrays
ishay.com
Resistors - Precision Thin Film Chip Arrays
Arrays (1206,
0805,
Case
Sizes)
High Precision
Resistor
Thinand
Film,0603
Surface
Mount
Arrays
ecision Resistor Thin Film, Surface Mount Arrays FEATURES
FEATURES
• Gold terminations over nickel barrier
FEATURES
• Gold
terminations
over nickel barrier
• High
stability passivated
nichrome resistive layer
• Gold terminations over nickel barrier
• High stability passivated nichrome resistive layer
• Tight TCR (10 ppm/°C) and TCR tracking
(to 2 ppm/°C)
Product may not
be to may
scalenot
• Very low noise and voltageProduct
coefficient
< - 30 dB,
be
to
scale
0.1 ppm/V typical
Product may not
be to scale
• High
stability
passivated
nichromeand
resistive
• Tight
TCR
(10 ppm/°C)
TCRlayer
tracking
(to TCR
2 ppm/°C)
• Tight
(10 ppm/°C) and TCR tracking
(to 2 ppm/°C)
• Very low noise and voltage coefficient < - 30 dB,
• Very0.1
lowppm/V
noise and
voltage coefficient < - 30 dB,
typical
0.1 ppm/V typical
• Ratio tolerance to 0.02 %
PR arrays can be used in most applications requiring a
• Ratio tolerance to 0.02 %
•
Ratio
tolerance
to
0.02
%
PR arrays
can (or
be set)
usedofinresistor
most applications
requiring
a
matched
elements. The
networks
d in most applications requiring
a pair
• Compliant to RoHS Directive 2002/95/EC
PR100, PR135, PR182
matched
(or set)
resistor aelements.
The networks
• Compliant to RoHS Directive 2002/95/EC
2 pair
ppm/°C
TCRoftracking,
tolerance
as tight as
f resistor elements. Theprovide
networks
PR100, PR135, PR182
• Compliant
to RoHSratio
Directive
2002/95/EC
www.vishay.com
provide
2
ppm/°C
TCR
tracking,
a
ratio
tolerance
as
tight
as
•
Halogen-free
according
to
IEC
61249-2-21
definition
Vishay
Dale Thin Film
racking, a ratio tolerance 0.02
as tight
%asand outstanding stability. They www.vishay.com
are available in
• Halogen-free according to IEC 61249-2-21
definition
0.02
outstanding
stability.
in definition
Vishay
Dale Thin Film
•and
Halogen-free
according
IECavailable
61249-2-21
ng stability. They are available
inandmm
1
mm,%1.35
1.82 mm
pitch.Theytoare
1 mm, 1.35 mm and 1.82 mm pitch.
2 mm pitch.
DIMENSIONS in mils
DIMENSIONS in mils
SCHEMATIC
SCHEMATIC
E
Schematic A: Independent Resistors
Schematic A: Independent Resistors
E A: Independent Resistors
Schematic
Electrical Diagram
Electrical Diagram
R1
R2
R7
Electrical Diagram
R2R R7R
R
R1 1R2
7
8
R8
R8
A
A
B
B
C
C
Number of Resistors: 2 to 8
R1 = R2 = .... R8
D
D
F
G
F
Number
of Resistors:
2 to 82 to 8
Number
of Resistors:
Notes
R1 =RR2==R....=R....
Notes (1) Where “N” = Number of resistors
8 R8
1
2
(1) Where
• “N”
± 2 mils
unlessofspecified
= Number
resistors
• ± 2 mils unless specified
DIMENSION
PR100
PR135
PR182
DIMENSION
PR100
PR135
PR182
A
64 ± 6
72 ± 6
118 ± 6
A
64 ± 6
72 ± 6
118 ± 6
B
17
20.3
23.6
B
17
20.3
23.6
C
30
43.3
61.8
C
30
43.3
61.8
D
10
10
10
D
10
10
10
E (1)
E = (N x F) ± 8 E = (N x F) ± 8 E = (N x F) ± 8
E (1)
E = (N x F) ± 8 E = (N x F) ± 8 E = (N x F) ± 8
F
40
53.3
71.8
G
F
40
53.3
71.8
G
15
15
15
G
15
15
15
TRICAL SPECIFICATIONS
STANDARD ELECTRICAL
STANDARD
ELECTRICALSPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
CONDITIONS
MECHANICAL
SPECIFICATIONS
SPECIFICATIONS
CONDITIONS
SPECIFICATIONS
CONDITIONS
MECHANICAL SPECIFICATIONS
Substrate
Passivated nichrome
- Alumina 99.6 %
Passivated
nichrome
-%
Substrate
Alumina 99.6
Technology
Thin
- Film
100
 to 200 k (PR100)
Technology
Thin Film
100  to 300 k (PR135)
100

to
200
k
(PR100)
Film
Resistance
Range
100  to 300 k (PR135)
-Passivated nichrome
100  to 1 M
(PR182)
Film
Passivated nichrome
Resistance
Range
100  to 300 k (PR135)
100
 to°C1 M (PR182)
Terminations
Solderable gold (Au) over nickel
± 10 ppm/°C
- 55 °C to
+ 125
100
 ppm/°C
to 1 M (PR182)
Terminations
Solderable
gold
(Au)
over
TCR: Absolute
±
10
55
°C
to
+
125
°C nickel
± 2 ppm/°C
- 55 °C to + 125 °C
TCR:
Absolute
10 ppm/°C
to °C
+ 125 °C
TCR:
Tracking
± 2±ppm/°C
- 55 °C- 55
to +°C
125
± 0.1
% to ± 10 %
DERATING CURVE
TCR:
Tracking
2 ppm/°C
- 55- °C to + 125 °C
Tolerance:
± 0.1 %± to
± 10 %
± 0.02 %Absolute
to ± 0.1 %
DERATING CURVE
Tolerance:
Absolute
± 0.1
%±to0.1
±%
10 %
Tolerance:
± 0.02
% to
100 mWRatio
(PR100)
100
Tolerance:
Ratio
± 0.02
to ± 0.1 %
mW %
(PR100)
125 mW (PR135)
At + 70 100
°C
100
80
(PR100)
Power
Resistor
125100
mWmW
(PR135)
At + 70 °C
200Rating:
mW (PR182)
80
- 200125
Power Rating:
Resistor
(PR135)
At + 70 °C
mWmW
(PR182)
60
- Package
Power Rating:
200 -mW 60
(PR182)
40
Stability:
Absolute
- -40
Power
Rating:
Package

0.1
ppm/V
20
Stability:
Ratio
Stability: Absolute
20
35Coefficient
V (PR100)
Voltage
 0.1 ppm/V
Stability:
Ratio
0
75 V (PR135)
35 V(PR100)
0
0
70
155
Voltage Coefficient
0.1 ppm/V
100Voltage
V (PR182)
Ambient
Temperature °C
0
70
155
Working
75 V35(PR135)
V (PR100)
Ambient Temperature °C
Range
- 55 °C to + 125 °C
- 100 V (PR182)
Working
V (PR135)
ange
- 55 °CVoltage
to
+ 150 °C
- - 55 °C75
PACKAGING
Operating
Temperature
Range
to + 125 °C
100 V (PR182)
 - 30 dB
Storage Temperature Range PACKAGING
- 55
°C to + 150 °C
Waffle-pack or tape and
reel
Operating Temperature
Range
- 55 °C to + 125 °C
Waffle-pack or tape and reel
Noise
 - 30 dB
olute
Storage Temperature
Range
- 55 °C to + 150 °C
MARKING
Thermal EMF
MARKING
o
- printedinformation
Noise
- 30 dB includes Vishay trademark series and model, schematic
On the primary package,
number of resistors, ohmic
Shelf Life Stability: Absolute
On thevalue,
primary
package,
printed information
includes
trademark series and model, schematic- number of resistors, ohmic
absolute
tolerance,
ratio tolerance,
type Vishay
of termination
Thermal
Shelf LifeEMF
Stability: Ratio
- Shelf Life Stability: Absolute value, absolute tolerance, ratio tolerance, type
- of termination
Document Number:
1
Shelf Life Stability:
Ratio
- 53039
For technical questions, contact: thinfilm@vishay.com
Revision: 20-Oct-11
Document
Number: 53039
1
SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
For
technical
questions,
contact:
thinfilm@vishay.com
RE SUBJECT TO SPECIFIC
DISCLAIMERS,
SET
FORTH
AT
www.vishay.com/doc?91000
PRODUCT
SHEET
2/2
VMN-PT9117-1201
Revision:
Number: 53039
1 PRODUCTS DESCRIBED HEREIN AND THISDocument
THIS20-Oct-11
DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE
DOCUMENT
ARE SUBJECT TO SPECIFIC
DISCLAIMERS,
SET
FORTH
AT
www.vishay.com/doc?91000
For technical questions, contact: thinfilm@vishay.com
This document
subject to
change without
notice.
THE PRODUCTS
DESCRIBED
HEREIN
AND THIS
DOCUMENT
ARE
SUBJECT TO
THIS is
DOCUMENT
IS SUBJECT
TO CHANGE
WITHOUT
NOTICE. THE
PRODUCTS
DESCRIBED
HEREIN
AND THIS
DOCUMENT
Revision:
20-Oct-11 DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Document Number: 53039
2
ARE SUBJECT
TO SPECIFIC
SPECIFIC DISCLAIMERS, SET FORTH
AT www.vishay.com/doc?91000
Precent of Rated Power
Revision 20-Oct-11
Precent of Rated Power
TEST
TEST
Passivated nichrome
Material
Material
Pin/Lead
Number
100  to 200
k (PR100)
Pin/Lead
Number
Revision: 20-Oct-11
Document Number: 53039
2
For technical questions,
contact: thinfilm@vishay.com
questions,
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECTFor
TOtechnical
CHANGE
WITHOUTcontact:
NOTICE.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT