Challenge Electronics
95 East Jefryn Boulevard
Deer Park, NY 11729
Tel:
1-800-722-8197
EMAIL: SALES@CHALLELEC.COM
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM
Fax: 1-631-667-5484
PRODUCT INFORMATION
PART #
CES26P23H13-80U
PIEZOELECTRIC MINI SPEAKER
RoHS
COMPLIANCE
DESCRIPTION:
Challenge Electronics Speaker, 26 mm Long,
Dynamic Piezo, 23mm Wide, Height 1.3 mm , 800 Hz. (Fo) Resonant
Frequency, U Contact or Solder Points Termination, RoHS
Compliant
Revision: 4-2012
• Low Power
• Small Size
• RoHS Compliant
• ISO/TS 16949, ISO 13485
SPECIFICATIONS
Capacitance
Square
0.85 μFD at 1,000 Hz.
Maximum Input Voltage
7.0 VRMS
9.0 VRMS
Resonant Frequency (Fo)
Frequency Range
800 ± 150 Hz.
800 Hz. to 10,000 Hz. SPL between 80 ~ 110dB
Sound Pressure Level
99.5 ± 3.0 dB (A), at 5.0 VRMS, 5 cm, Average 1.0, 1.5, 1.8, 2.0, 3.0, 3.5, 4.0 K Hz.
Operating Temperature
Storage Temperature
-20ºC to + 70ºC
-30ºC to +85ºC
Distortion
Less than 8% at 1,000 Hz. at 5 VRMS sine wave
Buzz & Rattle
Less than 6% at 5.0 VRMS sine wave between 400 Hz. and 11,000 Hz.
Length (L)
Physical Dimensions
Width (W)
Height (H)
26.5 mm
23.0 mm
1.3 mm
Material
Stainless Steel Frame, Piezoelectric, PZT (Lead Zirconate Titanate), with Kapton membrane
Termination
Tinned Copper on Kapton material, dimension 13 mm X 3 mm, bonding pad dimension 1 mm X 1.5 mm
Mounting Gasket
Poron Foam Material, Double Sided Adhesive Tape, 0.7 mm Thickness
Approximate Weight
Compliance
2 grams
RoHS
Shape
Rated Operating Voltage
Options
RELIABILITY
Thermal Operating Temperature 240 hours continuous operation at Rated Voltage, at Maximum Rated Operating Temperature *
Test
240 hours continuous operation at Rated Voltage, at Minimum Rated Operating Temperature *
240 hours storage at Maximum Rated Storage Temperatures *
240 hours storage at Minimum Rated Storage Temperatures *
10 cycles of Minimum and Maximum Operating Temperature, Transfer time between
Thermal Shock Test
temperature <10 seconds, with dwell time at each temperature of 30 minutes, (per IEC 68-2-14) *
Humidity Test
240 Hours at +40°C ± 2°C, 90-95% RH, (per IEC 68-2-67) *
Part mounted in a 100 grams fixture and dropped naturally from 75 cm height onto the surface of
Drop Test
concrete or steel, 3 axes (X, Y, Z) directions, 3 times (9 times total) *
Termination Strength
Maximum of 22 N (2.24 KF) load pull test, applied to each terminal in axial direction for 10 seconds
Parts should conform to original performance after 3 hours of recovery period
* Reliability Test Performance Sound Pressure Level: within ±3 dB tested with Rated Voltage
Resonant Frequency (Fo): with maximum Deviation of ±20% Hz.
Life Test 240 hours continuous operation at Rated Voltage, with Sine Wave 1,000 Hz.
For a period of one (1) year from date of shipping under normal operations conditions
Warranty This warranty does not apply to products damaged through misuse, abuse, improper installation, alteration, rework, or
attempt to repair
Thermal Storage Temperature
Test
Speaker
TEST PROCESS
Standard test condition of speaker
Microphone
B&K Type 4191
Power
Amplifier
X
Standard Baffle Board Recommended
In IEC 268-5 Where 1650mmx1350mm
Test Condition
Standard Test Fixture
STANDARD
Zero Level:
Mode:
potentiometer Range:
Sweep Time:
Temperature:
15 ~ 35ºC
Relative humidity:
45% ~ 85%
Atmospheric pressure: 860 mbar to
1060mbar
-dB
TSR
50 dB
0.5 sec
JUDGEMENT
Audio Analyzer
B&K Type 2012
Temperature :
20±3ºC
Relative humidity:
60% ~ 70%
Atmospheric pressure: 860 mbar to 1060
mbar
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with
respect to accuracy, completeness or results is extended and no liability is assumed.
Challenge Electronics reserves the right to make changes in any specification, data or material contained herein.
1 of 3
Input Voltage:
Distance:
X=
5 VRMS
5 cm
Copyright © 2012 Challenge Electronics
10/3/2012
Challenge Electronics
Tel:
1-800-722-8197
EMAIL: SALES@CHALLELEC.COM
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM
Fax: 1-631-667-5484
95 East Jefryn Boulevard
Deer Park, NY 11729
DIMENSIONS
Units in: mm, Tolerance: ± 0. 5 mm unless specified otherwise.
0.7
2.0±0.2
26.5±0.2
23.0±0.2
20.5
5.8
2 Each
1.0 X 1.5
5.2
19.5
23.0±0.2
19.5
1.3±0.2
Removable Mounting
Adhesive Cover
11.2
SPL vs. FREQUENCY RESPONSE
TOTAL HARMONIC DISTORTION
(only for reference)
(only for reference)
IMPEDANCE RESPONSE
BUZZES and RATTLES
(only for reference)
(only for reference)
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with
respect to accuracy, completeness or results is extended and no liability is assumed.
Challenge Electronics reserves the right to make changes in any specification, data or material contained herein.
2 of 3
Copyright © 2012 Challenge Electronics
10/3/2012
Challenge Electronics
95 East Jefryn Boulevard
Deer Park, NY 11729
Tel:
1-800-722-8197
EMAIL: SALES@CHALLELEC.COM
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM
Fax: 1-631-667-5484
PACKAGING
MARKING
Bundle
Shipping Box
Customer PN
Customer Part Number
Other PN if required
Other PN (if required)
Quantity
Quantity
Lot and/or Date Code
Lot and/or Date Code
Bundle Number
PO Number
Net Weight
Gross Weighjt
Box Number
TRAY
32 cm
25 cm
Z1
1 cm
Quantity
48 Parts
BUNDLE
X2
32 cm
Y2
Dimensions
25 cm
Z2
9 cm
Quantity
1,080 Parts
X1
Dimensions
Y1
SHIPPING BOX
X3
33 cm
Y3
Dimensions
24 cm
Z3
19 cm
Number of Trays
50
Quantity
2,400 Parts
Approximate Weight
5 kg
Approximate Net Weight
4.5 kg
Total Number of Boxes
Manufacturing Country
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with
respect to accuracy, completeness or results is extended and no liability is assumed.
Challenge Electronics reserves the right to make changes in any specification, data or material contained herein.
3 of 3
Copyright © 2012 Challenge Electronics
10/3/2012