Technical Specification Sheet
Document No. A6V10455751
December 3, 2014
GAMMA
Stand-alone Lighting Control Products
Siemens
Product
Number
Leviton
Product
Number
Technical
Specification
Sheet Number
For dimming incandescent, magnetic low-voltage, halogen, neon/cold
cathode lighting. 1920 W/1920 VA @ 120 Vac, 50/60 Hz.
LCE-6100-120
PE100-10W
G6723
Works with Mark X™, Powerline, and Hi-lume®
1920 W/1920 VA @ 120 Vac, 50/60 Hz
LCE-6210-FLD
PE200-10W
G6723A
Works with Mark X, Powerline, and Hi-lume
3000 VA @ 277 Vac, 50/60 Hz
LCE-6270-FLD
PE200-70W
G6723A
Works with electronic low voltage and incandescent
1000 W/1000 VA @ 120 Vac, 50/60 Hz
LCE-6400-120
PE400-10W
G6836
LCH-5724-WH
VPT24-1PZ
G8264
Relay rating: incandescent 1000W, fluorescent 1000 VA
Power input: 120 Vac, 60 Hz, 1.45 W
LCL-2525-120
ODC0S-I1W
G8334
Relay rating: incandescent 1000W, fluorescent 2700 VA
Power input: 277 Vac, 60 Hz, 1.89 W
LCL-2530-277
ODC0S-I7W
G8334
Relay rating: 120/277/347 Vac, 800/1200/1500 VA
Power input: 120/277/347 Vac, 50/60 Hz
LCL-2540-HB
OSFHU-ITW
G7366G
Relay rating: 240/480 Vac, 2000 VA
Power input: 240/480 Vac, 50/60 Hz
LCL-2545-2P
OSFHU-I4W
G7366G
Passive Infrared (PIR) 360°/1500 sq ft at 8 ft, 30 sec to 30 min.
Major motion area: 50 ft Ø
Minor motion area: 20 ft Ø
LCO-2250-PIR
OSC15-I0W
G6987A
Multi-technology sensor, 180°/500 sq ft at 8 ft, 30 sec to 30 min.
Major motion area: 64 ft × 32 ft
Minor motion area: 45 ft × 23 ft
LCO-2255-MT
OSC05-M0W
G8357
Multi-technology sensor, 360°/2000 sq ft at 8 ft, 30 sec to 30 min.
Major motion area: 64 ft × 32 ft
Minor motion area: 45 ft × 23 ft
LCO-2260-MT
OSC20-M0W
G8357
Multi-technology sensor with isolated HVAC (Class 2) relay (30 Vdc, 1A),
360°/2000 sq ft at 8 ft, 30 sec to 30 min.
Major motion area: 64 ft × 32 ft
Minor motion area: 45 ft × 23 ft
LCO-2265-MT
OSC20-RMW
G8579
Photo
Description
LCE: Dimming Power Extender
(Requires Gamma Universal Dimmer)
Power Extender
LCH: Astronomic Time Switch with Manual Override (Stand-alone)
24-hour LCD Programmable Timer Switch with Astronomic Functions
Power input: 120 Vac, 60 Hz, neutral is required.
Relay load rating: 120V 1800W incandescent, 15A resistive/inductive,
1 hp @ 120 Vac
LCL: Line Voltage Occupancy Sensors (Stand-alone)
Line Voltage Ceiling Occupancy Sensor
Line Voltage Fixture/Box Mount Occupancy Sensor
LCO: Ceiling and Wall Mount Sensors
(Stand-alone or connect to 5WG1 220-2DB31 I/O Pushbutton Interface)
Ceiling Mount Occupancy Sensor
Siemens Industry, Inc.
Page 1 of 4
Siemens
Product
Number
Leviton
Product
Number
Technical
Specification
Sheet Number
LCO-2310-MT
OSW12-M0W
G7732A
LCO-2315-HB
OSWHB-I0W
G7734A
LCO-2320-COR
OSWLR-I0W
G7733A
Power input: 120/230/277 Vac, 50/60 Hz
Control input: 24 Vdc, 5 mA from LCO sensors
Power output: 24 Vdc, 150 mA to LCO sensors and LCS LV wall switches
Relay load rating: 20A fluorescent/incandescent @ 120V;
20A fluorescent @ 230-277V; 1 hp @ 120V, 2 hp @ 240V
LCR-2410-ODO
OSP20-D0
G8226B
With Dry Contact Relay
Power input: 120/230/277 Vac, 50/60 Hz
Control input: 24 Vdc, 5 mA from LCO sensors
Power output: 24 Vdc, 150 mA to LCO sensors and LCS LV wall switches
Relay load rating: 20A fluorescent/incandescent @ 120V;
20A fluorescent @ 277V; 1 hp @ 120V, 2 hp @ 240V
HVAC relay rating: 0.5A @ 125 Vac, 1.0 A, 30 Vdc
LCR-2415-RDO
OSP20-RD0
G8226B
With Dry Contact Relay
Power input: 347 Vac, 60 Hz
Control input: 24 Vdc, 5 mA from LCO sensors
Power output: 24 Vdc, 120 mA to LCO sensors and LCS LV wall switches
Relay load rating: 15A fluorescent @ 347V; 1 hp @ 120V, 2 hp @ 240V
HVAC relay rating: 0.5A @ 125 Vac, 1.0A, 30 Vdc
LCR-2425-R30
OSP15-R30
G8226B
With Dry Contact Relay and Override Inputs for Occupancy Sensors
Power input: 120/230/277 Vac, 50/60 Hz
Control input: 24 Vdc, 5 mA from LCO sensors
Power output: 24 Vdc, 225 mA, 5.4W to LCO sensors and LCS LV wall
switches
Relay load rating: 20A fluorescent/incandescent @ 120V; 20A fluorescent
@ 277V; 1 hp @ 120V, 2 hp @ 240V; HVAC; 0.05A @ 120 Vac, 1A @ 20
Vdc and 15A fluorescent @ 347V; 1 hp @ 120V; 2 hp @ 240V
HVAC relay rating: 0.5A @ 125 Vac (Class 1) or 1.0A @ 30 Vdc (Class 2)
LCR-2420-RDH
OSP20-RDH
G8226B
..
LCR-2430-ODW
OPB15-ODW
G8533
LCS-5610-V
56081-2I
560812I
LCS-5610-W
56081-2W
560812W
Photo
Description
Wall/Corner Mount Occupancy Sensor
Multi-technology sensor, 110°/1200 sq ft at 8 ft, 30 sec to 30 min
Major motion area: 68 ft × 50 ft
Minor motion area: 32 ft × 32 ft
Wall/Corner Mount Aisle (High Bay) Occupancy Sensor
PIR 55 ft × 7 ft at 20 ft (max mounting height 30 ft), 30 sec to 30 min
Major motion area: 120 ft × 14 ft
Wall/Corner Mount Aisle (Long Range) Occupancy Sensor
PIR 100 ft × 33 ft at 10 ft, 30 sec to 30 min,
Major motion area: 100 ft × 14 ft
LCR: Power Packs for LCO Low Voltage Ceiling and Wall Mount Sensors
(Stand-alone or dry contract may connect to 5WG1 220-2DB31 I/O Pushbutton Interface)
Power Pack, UL 2043 Plenum-rated
Ceiling Box-mount Occupancy Sensor Power Base Adaptor
Power input: 120/277 Vac, 60 Hz, 40 mA
Control input: 24 Vdc, 5 mA from LCO sensors
Power output: 24 Vdc, 40 mA for one LCO sensor
Relay load rating: 120/277V 15A incandescent, electronic or magnetic
fluorescent ballast, 3/4 hp at 120V
LCS: Low Voltage Decora® Style Switches
Requires 5WG1 220-2DB31 I/O Pushbutton Interface
3A, 24V, single pole, double-throw, center-off, self grounding, back and side
wired, Decora wall plate not included (001-ODS0D-IDI)
Ivory
White
Page 2 of 4
Siemens Industry, Inc.
Photo
Description
Siemens
Product
Number
Leviton
Product
Number
Technical
Specification
Sheet Number
LCW: Line Voltage Decora Wall Switches with Occupancy Sensors (Stand-alone)
Wall Box PIR Occupancy Sensor, 180°/2100 sq ft at 4 ft
120/277 Vac, 60 Hz, neutral not required, external power pack not required,
Decora wall plate not included (001-ODS0D-IDI)
Single pole, single relay, manual on time delay 30 sec to 30 min.
Relay load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA @
120V, 2700 VA @ 277V
Motor: 1/4 hp @ 120V
Ivory
LCW-2210-V
ODS10-IDI
G8333B
White
LCW-2210-W
ODS10-IDW
G8333B
Single pole, dual relay, manual on time delay 30 sec to 30 min.
Relay 1 load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA
@ 120V, 2700 VA @ 277V
Relay 2 load rating: Incandescent 800W @ 120V; Fluorescent 800 VA @
120V, 1200 VA @ 277V
Motor: 1/4 hp @ 120V
Ivory
LCW-2215-V
ODS0D-IDI
G8318A
White
LCW-2215-W
ODS0D-IDW
G8318A
Wall Box Multi-technology Occupancy Sensor, 180°/2400 sq ft at 4 ft
120/277 Vac, 60 Hz, neutral not required, external power pack not required,
Decora wall plate not included (001-ODS0D-IDI)
Single pole, single relay, manual on time delay 30 sec to 30 min.
Relay load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA @
120V, 2700 VA @ 277V
Motor: 1/4 hp @ 120V
Ivory
LCW-2220-V
OSSMT-GDI
G7357D
White
LCW-2220-W
OSSMT-GDW
G7357D
Single pole, dual relay, manual on time delay 30 sec to 30 min.
Relay 1 load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA
@ 120V, 2700 VA @ 277V
Relay 2 load rating: Incandescent 800W @ 120V; Fluorescent 800 VA @
120V, 1200 VA @ 277V
Motor: 1/4 hp @ 120V
Ivory
LCW-2225-V
OSSMD-GDI
G8013C
White
LCW-2225-W
OSSMD-GDW
G8013C
Wall Box PIR Occupancy Sensor with Night Light, 180°/1200 sq ft at 4 ft
120/277 Vac, 60 Hz, neutral is required, external power pack not required,
Decora wall plate not included (001-ODS0D-IDI)
Single pole, single relay, manual on time delay 30 sec to 2 hours.
Relay load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA @
120V, 2700 VA @ 277V
Motor: 1/8 hp @ 120V
Ivory
LCW-2230-V
OSSNL-IDI
G7543B
White
LCW-2230-W
OSSNL-IDW
G7543B
Siemens Industry, Inc.
Page 3 of 4
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. APOGEE and Insight are registered trademarks of Siemens Industry, Inc. Other product or company
names mentioned herein may be the trademarks of their respective owners. © 2014 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
Tel. 1 + 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to SBT_technical.editor.us.sbt@siemens.com.
Document No. A6V10455751
Printed in the USA
Page 4 of 4
PE100-1
Product
Specifications
PE100-1 Power Extender
APPLICATION
PE100-1 Power Extender
Leviton’s PE100-1 Power Extender allows a dimming
zone’s power handling capacity to be extended to a
full 1920W/VA on 120V input power. It allows a zone
to dim or switch a fully loaded circuit of incandescent
and magnetic low voltage loads only.
FEATURES & BENEFITS
• Works with incandescent, magnetic low voltage,
halogen or neon/cold cathode lighting
• Low-end trim available for setting the
minimum brightness level
• Emulates the characteristics of the dimmer
that it is connected to in terms of dimming
range and resolution
• Works with any Dimensions Multi-zone
Controller/Dimmer to extend load capacity
on any zone
4.50
(114.3 mm)
2.80
(71.1 mm)
4.72
(119.9 mm)
2.06
(52.3 mm)
MOUNTING
All Power Extenders must have 4-1/2"
spacing above and below each unit for
proper ventilation and heat dissipation
(refer to figure 3). Line voltage wiring
should be at least 6ft away from sound or
electronic equipment wiring. Mount Power
Extender to wall box with “TOP” facing up
as follows: For Wall Box Mounting (refer
to figure 1), for Flush Mounting (refer to
figure 2) and for Panel Mounting (not
shown), proceed as follows:
a. The enclosure must be in accordance
with all local and national electrical codes.
b. Leviton DOES NOT recommend using a
door to enclose the front of a panel, since
this restricts airflow to the controls.
c. If mounting multiple controls in an
enclosure:
• Ambient timperature within an enclosure
“MUST REMAIN BETWEEN”32 o-104o F
(0 o-40 oC).
• If not mounting in a metal enclosure, all
units “MUST” be mounted in a wall box.
d. To improve heat dissipation of controls,
remove the faceplate from the unit.
Figure 3: Front View Spacing
1900 Box
TOP
2 Gang Raised Cover
Raised Cover
Mounting Screws
(4 Places)
TOP
4-1/2" (11.4 cm)
Minimum
Power
Extender
Figure 1: Surface Mounting
Power Extender
Wallplate
TOP
1900 Box
2 Gang Raised Cover
Raised Cover
Mounting Screws
(4 Places)
4-1/2" (11.4 cm)
Minimum
TOP
Power
Extender
Figure 2: Flush Mounting
Power Extender
Wallplate
SPECIFICATION SUBMITTAL
JOB NAME:
CATALOG NUMBERS:
JOB NUMBER:
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
1
Product
Specifications
PE100-1
.........................
SPECIFICATIONS
Wiring Diagram 1A: Single Feed Wiring Application w/Controller
Warranty: Limited 2-Year Warranty
(Load)
Single Feed Wiring
Line Hot can be
controlled by one
circuit breaker as
long as the total
load does not
exceed the
Power
rating of the
Extender
circuit breakers.
D3206/08
Controller/Dimmer
HOT
Neutral
Line
SWITCH
HOT
LOAD
NEUTRAL
CONTROL
• For Box-Mounted Dimmers: Must use a
120V, 600W Incandescent version from
the following families: IllumaTech™,
Mural™, True Touch™, ToggleTouch™,
TouchPoint™ and Home Controls
• For Monet™ installations, use a 120V,
600VA Monet Magnetic Low Voltage
dimmer (requires a Neutral wire)
• For dimmers that include a Neutral
wire (such as some scene-capable
dimmers), the dimmer Neutral wire
must be connected
• For Architectural Systems: Works
with all families
Hot (Black)
(120VAC)
Environmental
Operating Temperature Range:
0ºC to 40ºC
Storage Temperature Range:
-10ºC to 85ºC
Relative Humidity: 20%-90%
non-condensing
NEUTRAL
Compatibility
Load
Green
Ground
LOAD
Neutral (White)
Wiring Diagram 1B: Single Feed Wiring Application w/Dimmer
Used if Dimmer/Switch has Neutral connection
Hot (Black)
(120VAC)
(Load)
Single Feed Wiring
Line Hot can be
controlled by one
circuit breaker as
long as the total
load does not
exceed the
rating of the
Power
Extender
circuit breakers.
Physical
Color: Aluminum clear anodized extruded heat sink with a snap-on
molded white cover
Size: 4.72"L x 4.5"W x 0.5"H (120mm x 114mm x 12.7mm)
HOT
LOAD
NEUTRAL
SWITCH
HOT
Dimmer
CONTROL
Input Voltage: 120V, 50/60Hz
Load Rating: 1920W/VA
Load Output Power: Phase independent of control device
Dimmer Input: 120V 50/60Hz
Testing/Code Compliance: UL Listed, CSA Certified and FCC Part 15
NEUTRAL
Electrical
White
Black
Load
Green
Ground
LOAD
Neutral (White)
Wiring Diagram 2A: Dual Feed Wiring Application w/Controller
Wiring Diagram 2B: Dual Feed Wiring Application w/Dimmer
Used if Dimmer/Switch has Neutral connection
Hot (Black)
Line 1 (120VAC)
(Load)
Green
Ground
LOAD
Hot (Black)
Line 2 (120VAC)
Neutral 2 (White)
Neutral 2 (White)
Wiring Diagram 3: Dual Feed Wiring Application w/Dimmer and Two Power Extenders
Hot (Black)
Line (120VAC)
(Load)
(Load)
D3206/08
Controller/Dimmer
Power
Extender
HOT
SWITCH
HOT
LOAD
CONTROL
NEUTRAL
NEUTRAL
SWITCH
HOT
HOT
LOAD
CONTROL
NEUTRAL
NEUTRAL
Neutral (White)
Dual Feed Wiring
The Input control
circuit and the
Output load circuit
can be supplied
by two circuit
Power
breakers on
Extender
a single phase
or by two
separate Hot (Black)
Line 1 (120VAC)
phases.
Neutral
Line
Load
Note:
Up to 4 Power
Extenders can
be Connected
together.
Green
Ground
LOAD 1
Neutral (White)
Hot (Black)
Line 2 (120VAC)
LOAD 2
Neutral (White)
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
© Copyright 2003 Leviton Manufacturing Co., Inc. All rights reseved. G-6723/G3
SWITCH
HOT
HOT
LOAD
Dimmer
NEUTRAL
HOT
Dual Feed Wiring
The Input control
circuit and the
Output load circuit
can be supplied by
two circuit breakers
Power
on a single phase
Extender
or by two
separate phases.
Load
Hot (Black)
Line 2 (120VAC)
(Load)
Neutral 1 (White)
Neutral
Line
SWITCH
HOT
LOAD
CONTROL
NEUTRAL
Dual Feed Wiring
The Input control
circuit and the
Output load circuit
can be supplied by
two circuit breakers
on a single phase Power
Extender
or by two
separate phases.
NEUTRAL
D3206/08
Controller/Dimmer
CONTROL
Neutral 1 (White)
NEUTRAL
Hot (Black)
Line 1 (120VAC)
White
Black
Load
Green
Ground
LOAD
PE200-1/
PE200-7
Product
Specifications
PE200-1/PE200-7 Power Extenders
APPLICATION
FEATURES & BENEFITS
• Works with Mark X or Hi-lume® 120V
(Cat. No. PE200-1) and 277V
(Cat. No. PE200-7) dimmable ballasts
• Low-end trim available for setting the minimum
brightness level
• Emulates the characteristics of the dimmer that it
is connected to in terms of dimming range and
resolution
• Works with any Dimensions Multizone
Controller/Dimmer when zone is set-up as
fluorescent dimmer to extend load capacity
on any zone
4.50
(114.3 mm)
4.72
(119.9 mm)
2.80
(71.1 mm)
2.06
(52.3 mm)
Mark X is a trademark of the Advance Transformer Company.
Hi-lume is a registered trademark of Lutron Electronic Co., Inc.
Physical
SPECIFICATIONS
Compatibility
• For Box Mounted Dimmers: Must use a 120V, 600VA Mark X
version from the following families: Monet™, IllumaTech™, Mural™,
and TouchPoint™
• For dimmers that include a Neutral wire (such as some scenecapable dimmers), the dimmer Neutral wire must be connected
• For Architectural Systems: Works with all families
Electrical
Input Voltage: 120V, 50/60Hz (PE200-1); 277V 50/60Hz (PE200-7)
Load Rating: 1920VA@120VAC fluorescent (PE200-1);
3000VA@277VAC fluorescent (PE200-7)
Load Output Power: Phase independent of control device
Dimmer Input: 120V 50/60Hz for PE200-1 and PE200-7
Testing/Code Compliance: UL Listed, CSA Certified and FCC Part 15
Color: Aluminum clear anodized extruded heat sink with a snap-on
molded white cover
Size: 4.72"L x 4.5"W x 0.5"H (120mm x 114mm x 12.7mm)
PE200-1/PE200-7 Power Extenders
• Leviton’s PE200-1 Power Extender allows a
dimming zone’s power handling capacity to be
extended to a full 1920VA on 120V input power.
The PE200-1 will drive 120V Advance Mark X™ or
equivalent dimmable fluorescent ballasts only.
• Leviton’s PE200-7 Power Extender allows a
dimming zone’s power handling capacity to be
extended to a full 3000VA on 277V input power.
The PE200-7 will drive 277V Advance Mark X or
equivalent dimmable fluorescent ballasts
Environmental
Operating Temperature Range: 0ºC to 40ºC
Storage Temperature Range: -10ºC to 85ºC
Relative Humidity: 20%-90% non-condensing
Warranty: Limited 2-Year Warranty
SPECIFICATION SUBMITTAL
JOB NAME:
CATALOG NUMBERS:
JOB NUMBER:
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
1
PE200
Wiring Diagram 1A
120V Single Feed Wiring Application w/Mark X™ Ballast
)
Used if Dimmer/Switch has Neutral connection (
Hot (Black)
(120VAC)
120V Mark X™
Type Dimmer
SWITCH
HOT
HOT
LOAD
CONTROL
NEUTRAL
D3206/08
Controller/Dimmer
NEUTRAL
Single Feed Wiring
Line Hot can be
controlled by one
circuit breaker as
long as the total
load does not
exceed the
rating of the
circuit breaker.
(Load)
Neutral
Line
Neutral
OR
Line
Load
Load
Green
Ground
Power
Extender
INPUT
Green
Ground
OUTPUT
LOAD
Black
White
Neutral (White)
MARK X™
DIMMABLE
BALLAST
Wiring Diagram 1B
120V Dual Feed Wiring Application w/Mark X™ Ballast
Used if Dimmer/Switch has Neutral connection (
Hot (Black)
Line 1 (120VAC)
)
(Load)
Neutral 1 (White)
Power
Extender
SWITCH
HOT
HOT
LOAD
NEUTRAL
CONTROL
NEUTRAL
Dual Feed Wiring
The Input control
circuit and the
Output load circuit
can be supplied by
two circuit breakers
on a single phase
or by two
separate phases.
120V Mark X™
Type Dimmer
D3206/08
Controller/Dimmer
Neutral
Line
OR
Load
Neutral
Line
Load
Green
Ground
INPUT
Green
Ground
OUTPUT
LOAD
Hot (Black)
Line 2 (120VAC)
Black
Neutral 2 (White)
White
MARK X™
DIMMABLE
BALLAST
Wiring Diagram 2A
120V Single Feed Wiring Application w/Hi-lume® Ballast
Used if Dimmer/Switch has Neutral connection (
Hot (Black)
(120VAC)
(Load)
120V Mark X™
Type Dimmer
SWITCH
HOT
HOT
LOAD
NEUTRAL
CONTROL
D3206/08
Controller/Dimmer
NEUTRAL
Single Feed Wiring
Line Hot can be
controlled by one
circuit breaker as
long as the total
load does not
exceed the
rating of the
circuit breaker.
)
Neutral
Line
OR
Load
Neutral
Line
Load
Green
Ground
Power
Extender
INPUT
Green
Ground
OUTPUT
LOAD
Orange
120V Hi-lume®
Black
BALLAST
White
Neutral (White)
Wiring Diagram 2B
120V Dual Feed Wiring Application w/Hi-lume® Ballast
Used if Dimmer/Switch has Neutral connection (
Hot (Black)
Line 1 (120VAC)
)
(Load)
Neutral 1 (White)
Power
Extender
Hot (Black)
Line 2 (120VAC)
Neutral 2 (White)
SWITCH
HOT
HOT
LOAD
NEUTRAL
CONTROL
NEUTRAL
Single Feed Wiring
Line Hot can be
controlled by one
circuit breaker as
long as the total
load does not
exceed the
rating of the
circuit breaker.
120V Mark X™
Type Dimmer
D3206/08
Controller/Dimmer
Neutral
Neutral
Line
OR
Load
Green
Ground
INPUT
Line
Load
Green
Ground
OUTPUT
LOAD
Orange
120V Hi-lume®
Black
BALLAST
White
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
2
Visit our Website at: www.leviton.com
© Copyright 2003 Leviton Manufacturing Co., Inc. All rights reserved.
PE200
Wiring Diagram 3A
277V Dual Feed Wiring Application w/Mark X™ Ballast
)
Used if Dimmer/Switch has Neutral connection (
Hot (Black)
Line 1 (120VAC)
(Load)
Neutral 1 (White)
Power
Extender
HOT
Neutral
Neutral
Line
SWITCH
HOT
NEUTRAL
LOAD
CONTROL
NEUTRAL
Dual Feed Wiring
The Input control
circuit and the
Output load circuit
can be supplied by
two circuit breakers
on a single phase
or by two
separate phases.
120V Mark X™
Type Dimmer
D3206/08
Controller/Dimmer
OR
Load
Line
Load
Green
Ground
INPUT
Green
Ground
OUTPUT
LOAD
Hot (Black)
Line 2 (277VAC)
Black 277V MARK X™
DIMMABLE
BALLAST
White
Neutral 2 (White)
Wiring Diagram 3B
277V Dual Feed Wiring Application w/Hi-lume® Ballast
Used if Dimmer/Switch has Neutral connection (
Hot (Black)
Line 1 (120VAC)
)
(Load)
Neutral 1 (White)
Power
Extender
HOT
Neutral
Neutral
Line
SWITCH
HOT
LOAD
NEUTRAL
CONTROL
NEUTRAL
Single Feed Wiring
Line Hot can be
controlled by one
circuit breaker as
long as the total
load does not
exceed the
rating of the
circuit breaker.
120V Mark X™
Type Dimmer
D3206/08
Controller/Dimmer
OR
Line
Load
Load
Green
Ground
INPUT
Green
Ground
OUTPUT
LOAD
Hot (Black)
Line 2 (277VAC)
Orange
277V Hi-lume®
Black
BALLAST
White
Neutral 2 (White)
Wiring Diagram 4
Dual Feed Wiring Application w/Controller
and Two Power Extenders (277V depicted)
Hot (Black)
Line (120VAC)
(Load)
(Load)
D3206/08
Controller/Dimmer
Power
Extender
HOT
SWITCH
HOT
LOAD
CONTROL
NEUTRAL
NEUTRAL
SWITCH
HOT
HOT
LOAD
CONTROL
NEUTRAL
NEUTRAL
Neutral (White)
Neutral
Line
Load
Green
Ground
Power
Extender
LOAD 1
Hot (Black)
Line 1 (277VAC)
277V MARK X™
DIMMABLE
BALLAST
Neutral (White)
LOAD 2
Hot (Black)
277V MARK X™
DIMMABLE
BALLAST
Line 2 (277VAC)
Neutral (White)
Dual Feed Wiring
The Input control circuit and the Output load circuit can be supplied by
two circuit breakers on a single phase or by two separate phases.
Note:
Up to 4 Power Extenders can be connected together.
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
© Copyright 2003 Leviton Manufacturing Co., Inc. All rights reserved.
3
PE200
MOUNTING
All Power Extenders must have 4-1/2" spacing above and below each unit for proper ventilation and heat dissipation (refer to figure 3). Line
voltage wiring should be at least 6ft away from sound or electronic equipment wiring. Mount Power Extender to wall box with “TOP” facing up
as follows: For Wall Box Mounting (refer to figure 1), for Flush Mounting (refer to figure 2) and for Panel Mounting (not shown),
proceed as follows:
a. The enclosure must be in accordance with all local and national electrical codes.
b. Leviton DOES NOT recommend using a door to enclose the front of a panel, since this restricts airflow to the controls.
c. If mounting multiple controls in an enclosure:
• Ambient timperature within an enclosure “MUST REMAIN BETWEEN”32 o-104o F
(0 o-40 oC).
• If not mounting in a metal enclosure, all units “MUST” be mounted in a wall box.
d. To improve heat dissipation of controls, remove the faceplate from the unit.
Figure 3: Front View Spacing
1900 Box
TOP
2 Gang Raised Cover
Raised Cover
Mounting Screws
(4 Places)
TOP
4-1/2" (11.4 cm)
Minimum
Power
Extender
Power Extender
Wallplate
Figure 1: Surface Mounting
TOP
1900 Box
2 Gang Raised Cover
Raised Cover
Mounting Screws
(4 Places)
4-1/2" (11.4 cm)
Minimum
TOP
Power
Extender
Figure 2: Flush Mounting
Power Extender
Wallplate
SPECIFICATION SUBMITTAL
JOB NAME:
CATALOG NUMBERS:
JOB NUMBER:
4
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
© Copyright 2003 Leviton Manufacturing Co., Inc. All rights reseved. G-6723A/G3
PE400-1
Product
Specifications
PE400-1 Power Extender
APPLICATION
FEATURES & BENEFITS
• Works with electronic low voltage and incandescent
• Emulates the characteristics of the dimmer that it is connected to
in terms of dimming range and resolution
• Works with any Dimensions Multi-zone Controller/Dimmer to
extend load capacity for electronic low voltage loads on any zone
2.06
MOUNTING
4.50
2.80
4.72
All Power Extenders must have 4-1/2" spacing above
and below each unit for proper ventilation and heat
dissipation (refer to figure 3). Line voltage wiring
should be at least 6ft away from sound or electronic
equipment wiring. Mount Power Extender to wall box
with “TOP” facing up as follows: For Wall Box
Mounting (refer to figure 1), for Flush Mounting
(refer to figure 2) and for Panel Mounting (not
shown), proceed as follows:
a. The enclosure must be in
accordance with all local and
national electrical codes.
Figure 3: Front View Spacing
1900 Box
b. Leviton DOES NOT recommend
using a door to enclose the front
of a panel, since this restricts
airflow to the controls.
c. If mounting multiple controls in
an enclosure:
• Ambient timperature within an
enclosure “MUST REMAIN
BETWEEN”32 o-104o F
(0 o-40 oC).
2 Gang Raised Cover
Raised Cover
Mounting Screws
(4 Places)
TOP
4-1/2" (11.4 cm)
Minimum
Power
Extender
Power Extender
Wallplate
Figure 1: Surface Mounting
• If not mounting in a metal
enclosure, all units “MUST” be
mounted in a wall box.
d. To improve heat dissipation of
controls, remove the faceplate
from the unit.
1900 Box
2 Gang Raised Cover
Raised Cover
Mounting Screws
(4 Places)
4-1/2" (11.4 cm)
Minimum
TOP
Power
Extender
Figure 2: Flush Mounting
Power Extender
Wallplate
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
PE400-1 Power Extender
Leviton’s PE400-1 Power Extender allows a dimmers power handling capacity to be
extended to a full 1000W/VA on 120V input power. It allows a dimmer to dim or
switch a fully loaded circuit of electronic low voltage and incandescent loads only.
PE400-1
.........................
Product Specifications
SPECIFICATIONS
Wiring Diagram 1: Single Feed Wiring Application
Compatibility
Used if Dimmer/Switch has Neutral connection (
Hot (Black)
(120VAC)
)
(Load)
Neutral
Line
SWITCH
HOT
LOAD
HOT
CONTROL
NEUTRAL
• For dimmers that include a Neutral wire (such as some scene-capable
dimmers), the dimmer Neutral wire must be connected
Neutral
OR
Line
Load
Load
Green
Ground
Power
Extender
INPUT
Green
Ground
OUTPUT
• For Architectural Systems: Works with all families
• Compatible with all new Dimensions Multizone controllers
Dimmer
D3206/08
Controller/Dimmer
• For Monet™ installations, use a 120V, 600VA Monet Magnetic
Low Voltage dimmer (requires a Neutral wire)
NEUTRAL
• For Box-Mounted Dimmers: Must use a 120V, 600W Incandescent
version from the following families: IllumaTech™, Mural™, True
Touch™, SureSilde™, TouchPoint™ and Home Controls
LOAD
Black
ELECTRONIC
LOW-VOLTAGE
BALLAST
White
Neutral (White)
Electrical
Input Voltage: 120V, 50/60Hz
Wiring Diagram 2: Dual Feed Wiring Application
Load Rating: 1000W/VA
Load Output Power: Phase independent of control device
Dimmer Input: 120V 50/60Hz
Testing/Code Compliance: UL Listed, CSA Certified and FCC Part 15
Used if Dimmer/Switch has Neutral connection (
Hot (Black)
Line 1 (120VAC)
)
(Load)
Neutral 1 (White)
Environmental
Operating Temperature Range: 0ºC to 40ºC
HOT
LOAD
Neutral
Line
SWITCH
HOT
NEUTRAL
CONTROL
NEUTRAL
Color: Aluminum clear anodized extruded heat sink with a snap-on
molded white cover
OR
Load
Neutral
Line
Load
Green
Ground
Power
Extender
Size: 4.72"L x 4.5"W x 0.5"H (120mm x 114mm x 12.7mm)
Dimmer
D3206/08
Controller/Dimmer
Physical
INPUT
Green
Ground
OUTPUT
LOAD
Hot (Black)
Line 2 (120VAC)
Black
Neutral 2 (White)
White
ELECTRONIC
LOW-VOLTAGE
BALLAST
Storage Temperature Range: -10ºC to 85ºC
Relative Humidity: 20%-90% non-condensing
Wiring Diagram 3: Dual Feed Wiring Application
w/Controller and Two Power Extenders
Warranty:
Limited 2-Year Warranty
Hot (Black)
Line (120VAC)
(Load)
(Load)
D3206/08
Controller/Dimmer
Power
Extender
Hot (Black)
Line 1 (120VAC)
LOAD
SWITCH
HOT
HOT
NEUTRAL
CONTROL
NEUTRAL
SWITCH
HOT
HOT
LOAD
CONTROL
NEUTRAL
Power
Extender
NEUTRAL
Neutral (White)
Neutral
Line
Load
Green
Ground
LOAD 1
Black
Neutral (White)
ELECTRONIC
LOW-VOLTAGE
BALLAST
White
Hot (Black)
Black
LOAD 2
Line 2 (120VAC)
Neutral (White)
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
© Copyright 2003 Leviton Manufacturing Co., Inc. All rights reseved. G-6836/A4-tp
ELECTRONIC
LOW-VOLTAGE
BALLAST
White
PRODUCT SPECIFICATIONS
Timer Switches for Energy Management
LTB30-1L
LTT60-1L
Better than ever – Leviton Decora Timer Switches offer
advanced features, superior accuracy and contemporary
aesthetics. Our robust selection provides convenient timed
control of lighting and motor loads in homes, offices, schools,
hotel rooms and other small commercial applications. An easy
upgrade, automatic timers help reduce energy costs, improve
security and add convenience. Homeowners can set lights
to turn on and off for a lived-in look while they are away, or
automate control of heat lamps, pool pumps or bathroom fans.
Our versatile selection includes fully programmable and preset
timers in popular styles and colors. All are backed by Leviton’s
long history of quality and reliability.
APPLICATIONS
n Residential/commercial indoor, outdoor and holiday lighting
n Ventilation, exhaust, attic and ceiling fans
n Heaters, heat lamps, pool filters and hot tubs
FEATURES AND BENEFITS
n Single pole or 3-way applications (most models)
n Replaces a standard wall switch (neutral required
for select models)
6651
6652
New 5-Button Decora Timer Switches (neutral required)
For lighting, heat lamps, hot tubs, attic and exhaust fans
n Improved 15-, 30-, or 60-minute timers, plus 12- and new
2-hour options
n Four preset buttons and OFF
n Simple press and hold override timer function
n Flexibility to program timer to convert to any other timer interval
n Color/Timer change kits available
n Three colors in one box
New 5-Button Decora Timer Switches
For incandescent indoor and outdoor lighting
n 30- or 60-minute timers
n Four present buttons and OFF
n Simple press and hold override timer function
14-Hour Programmable Timer Switch
For residential incandescent indoor/outdoor
and seasonal lighting
n Automatic and manual ON/OFF control option
n 14 hour program capability in 1 hour increments
n Program repeats daily
n Soothing green LEDs
n Battery backup protects memory in event of power outage
n Coordinates with Decora screwless wallplates
Countdown Timer Switch
For residential/light commercial indoor/outdoor
lighting, office lights and ceiling fans
n Simple rotary dial time selection of settings,
from 1 minute to 18 hours
n Automatic and manual ON/OFF control option
n Illuminated LED indicates load is ON
n Blinking LED accompanied by annunciator sound indicates
end of time cycle
New Vizia + 24-Hour Programmable Timer Switch
For indoor/outdoor lighting, fans and pool filters
n Easy to program and operate
n Timer settings at a glance with large, back-lit display
n Flexibility to program all days, weekdays, weekends
or any combination of days
n Astronomical clock automatically adjusts to local
sunrise/sunset times
n Automatic daylight savings time option
n Rechargeable battery keeps time during temporary
power outages
n Three colors in one box
n Color change kits available
®
SPECIFICATIONS
Operating Temperatures
0˚ C to 40˚ C
Leviton Mfg. Co., Inc.
201 North Service Road Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com
© 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Decora® Timer Switches for Energy Management
VPT24-1P
AGENCY STANDARDS AND COMPLIANCE
WARRANTY INFORMATION
n
n Limited Five-Year Warranty
n CSA Certified (File #152105)
n UL Listed VPT24, LTBxx Series and LTTxx Series (File #E-328809)
n UL Listed 6651 and 6652 (File #E-148771)
DIMENSIONAL DRAWINGS
VPT24-1P
LTBxx-1L Series
1.40 (35.6)
1.75 (44.5)
1.40 (35.6)
1.75 (44.5)
2.751
1.652
0.255
4.13 (104.9)
4.13 (104.9)
2.71 (68.8)
4.500
3.812
2.72 (69.1)
0.19 (4.9)
.038 (9.7)
Line
VAC, 60Hz
1.73 (44.0)
6651/6652
1.35 (34.2)
0.23 (5.8)
1.19 (30.2)
2.76 (70.1)
2.70 (68.6)
4.13 (104.9)
0.25 (6.4)
4.13 (104.9)
Decora® Timer Switches for Energy Management
LTTxx-1L Series
1.74 (44.2)
*6651 Shown
WIRING DIAGRAMS
Vizia + Programmable
Timer Switch
VPT24-1P
Single Pole Wiring Application
WH
BK
Hot (Black)
WH
Black
Green
Ground
White
(unused)
BK
WH
YL
Green
Ground
Line
120VAC, 60Hz
Load
BK
Black
YL/RD
RD
Timer Sw
Coordinating Remote Switch (no LED)
Timer Switch
Load
Use lead for 3-Way or more
applications only. For single
pole applications, do not
remove the insulating label.
RD
YL/RD
(unused)
RD
White
Gree
Grou
Neutral (White)
VPT24-1P
3-Way Wiring with Coordinating Remote Switch,
VP0SR-10 (no LED) Application
Timer Switch
Coordinating
Remote
Switch Timer
(no LED)
Switch
Coordinating
Remote Switch
(no LED)
N
VPT24-1P
3-Way Wiring with Matching Remote Switch,
VP0SR-1L (w/LED) Application
Matching
Remote
Switch Timer
(w/LED)Switch
Timer Switch
Matching Remote
Switch
(w/LED)
Hot (Black) Hot (Black)
ck)
WH
Black
Black
WH
BK
(unused)
Green
Ground
Load
e
le
l.
Complies with FCC Part 15, Class B
White
Load
RD
(unused)
RD
YL/RD
(unused)
White
te)
BK
WH
(unused)
Green
Ground
YL/RD
RD
WH
BK
BK
YL/RD
YL/RD
RD
Green
Ground
Line
Line
120VAC, 60Hz120VAC, 60Hz
(Black)
Hot (Black) Hot WH
Green
Ground
Line
Line
120VAC, 60Hz120VAC, 60Hz
Green
Ground
Neutral (White)
Neutral (White)
YL/RD
WH
BK
Green
Ground
YL/RD
RD
WH
BK
Green
Ground
RD
YL/RD
BK
Black
Green
Ground
YL/RD
Load
White
Neutral (White)
Neutral (White)
Leviton Mfg. Co., Inc.
201 North Service Road Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com
© 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
WH
BK
Black
Load
White
WIRING DIAGRAMS
5-Button Timer Switches
LTBxx Series
Single Pole Wiring Application
Timer Switch
White
Coordinating Remote Switch (no LED)
Black
WH
Hot (Black)
Green
Ground
BK
Green
Ground
Yellow/Red
Black
RD
Insulating
Label
Line
120 VAC, 60Hz
BK
Hot (Black)
Green
Ground
RD
YL/RD
(unused)
Load
Load
WH
(unused)
Black
Red
Timer Switch
YL/RD
Line
120VAC, 6
White
White
Neutral (White
Neutral (White)
LTBxx Series
LTBxx Series
3-Way Wiring with Coordinating Remote Switch,
VP0SR-10 (no LED) Application
3-Way Wiring with Matching Remote Switch,
VP0SR-1L (w/LED) Application
Coordinating Remote Switch (no LED) Timer Switch
Coordinating Remote Switch (no LED) Timer Switch
WH
Black
Line
ine VAC, 60Hz
120
AC, 60Hz
BK
BK
(unused)WH
(unused)
Green
Green Ground
Ground
Black
RD
Load
White
WH
YL/RD
RD
YL/RD
RD(unused)
Load(unused)
WH
RD
BK
Matching Remote Switch (with LED) Timer Switch
Matching Remote Switch (with LED) Timer Switch
BK Hot (Black)
Hot (Black)
Hot (Black)
Hot (Black)
WH
Green
Green Ground
Ground
WH
YL/RD
Line
YL/RD
Line
120VAC, 60Hz
120VAC, 60Hz
Green
Ground
Line
Line
120VAC, 60Hz
120VAC, 60Hz
WH
BK
BK
YL/RD
WH
BK
Green
Ground
Green
Ground
YL/RD
RD
BK
RD
YL/RD
Green
Ground
Black
YL/RD
Load
White
Load
White
Neutral (White)
Neutral (White)
White)
Black
White
Neutral (White)
Neutral (White)
LTTxx Series
Single Pole Wiring Application
Timer
Hot (Black)
Black
Black
Black
Line
120VAC
60Hz
Load
Green
Ground
White
Neutral (White)
6651/6652
3-Way Wiring with a 3-Way Switch
Single Pole Wiring Application
Timer Switch
Timer Switch
Blue
Hot (Black)
Blue
Black
Hot (Black)
Black
Line
120V AC 60 Hz
Yellow
Load
Black
OFF
Yellow
Green Ground
Switch
Common Terminal
Load
Line
120V AC 60 Hz
White
Green Ground
Green Ground
White
Neutral (White)
Neutral (White)
Leviton Mfg. Co., Inc.
201 North Service Road Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com
© 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Decora® Timer Switches for Energy Management
Black)
DERATING/MAXIMUM CAPACITY
In multi-gang installations, all devices must be derated in accordance with the following chart:
Cat No.
Single Gang
Double Gang
Triple Gang or More
VPT24-1P
No derating required
No derating required
No derating required
6651
No derating required
No derating required
No derating required
6652
No derating required
No derating required
No derating required
LTBxx Series
Resistive: 20A (2400W)
Incandescent: 1800W
Inductive: 20A, Motor: 1HP
Resistive: 16A (1920W)
Incandescent: 1800W
Inductive: 16A, Motor: 1HP
Resistive: 16A (1920W)
Incandescent: 1800W
Inductive: 16A, Motor: 1HP
LTTxx Series
600W
500W
400W
Decora® Timer Switches for Energy Management
ORDERING INFORMATION
Decora® Timer Switches - Programmable Electronic Timer Switches, Single Pole or 3-Way
Cat. No.
Description
Rating
Color*
VPT24-1L
Vizia +® 24 Hour, with astronomical clock; neutral
required
1800W Incandescent, 15A Resistive/
Inductive, 1 HP @ 120VAC
Z
6651
14 hour programmable in 1 hour intervals
500W Incandescent @ 120VAC
W, I
6652
Variable countdown, 1 minute to 18 hour intervals,
neutral required
500W Incandescent, 500VA Rapid Start
Ballasts only 1/6 HP 120VAC 60 Hz
W, I, A
5-Button Timer Switches - Four Preset Buttons and OFF
Single Pole or 3-Way, Neutral Required, 1800W Incandescent, 20A Resistive/Inductive, 1 HP @ 120VAC
Cat. No.
Description
Interval
Color*
LTB15-1L
15 minute
2-5-10-15 minutes
Z
LTB30-1L
30 minute
5-10-15-30 minutes
Z
LTB60-1L
60 minute
10-20-30-60 minutes
Z
LTB02-1L
2 hour, Title 24 Compliant
15M-30M-1H-2 hours
Z
LTB12-1L
12 hour
2-4-8-12 hours
Z
Single Pole, Neutral Not Required, 600W Incandescent, 5A Resistive
Cat. No.
Description
Interval
Color*
LTT30
30 minute
5-10-15-30 minutes
I, W, T
LTT60
60 minute
10-20-30-60 minutes
I, W, T
Color Change Kits
Cat. No.
Description
Color*
VPTKT
Vizia + 24 Hour Timer Color Change Kit
W, I, T, G, E, B
LTBKT
5-Button Timer Color Change Kit
W, I, T, E, B
*To order colors, add suffix to basic Cat. No. White (-W), Ivory (-I), Light Almond (-T).
Products with suffix –Z are packaged 3 colors in a box: White, Ivory and Light Almond.
Color Change Kits in White (-W), Ivory (-I), Light Almond (-T), Gray (-G), Black (-E), Brown (-B).
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747-3138
Telephone: 1-800-323-8920 • Fax: 1-800-832-9538 • Tech Line: (8:30AM-7:00PM E.T. Monday-Friday): 1-800-824-3005
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • Fax: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • Fax. (+52) 5386-1797 • www.leviton.com.mx
Decora and Vizia + are registered trademarks of Leviton Manufacturing Co., Inc.
Visit our website at www.leviton.com
© 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8264/L09-sw
product data
Self-Contained PIR Ceiling Mount
Occupancy Sensor
BASIC OPERATION
The ODC0S-I uses passive infrared (PIR) detection
technology to monitor a room for occupancy
through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor
zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches
its lighting loads ON. The lights will remain ON as
long as there is an occupant moving through the
sensor zones.
APPLICATIONS
Leviton’s Self-Contained Passive Infrared Ceiling
Occupancy Sensor is the cost-effective choice
for commercial and institutional installations,
where installation of the recessed ceiling unit is
difficult, inconvenient or costly. Available in 120V,
220V and 277V versions, the ODC0S-I is ideal for:
• Storage areas • Small bathrooms • Retrofit
• Copy rooms
• Mop/sink closets
• Small spaces without wall switches.
The Self-Contained Ceiling Sensor does not require
an external control unit for power or switching the
load ON and OFF.
FEATURES
• Sensor and switching relay in one unit—reduces
labor and need for additional materials.
• 360° field-of-view with approximately 530 sq. ft.
of coverage when mounted at 8 ft. This reduces the number of additional sensors typically
required in many spaces.
• Adjustable Delayed-OFF time setting between
20 seconds and 15 minutes allows custom
adjustment for maximum savings.
• Light Sensor - an ambient light override option
can be set between 2 and 500+ foot candles
and full brightness to prevent the sensor from
switching lights ON when ample natural sunlight is available. Hold-OFF feature.
• Segmented Fresnel lens contains 79 segments
for optimum sensitivity and detection performance.
• A standard A/C toggle switch may be used to
provide manual-OFF override so that lights may
be switched OFF.
• Red LED indicator light flashes when sensor
detects motion, to verify power placement and
function of sensor at installation.
Leviton Mfg. Co., Inc. Lighting Management Systems
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/lms
© 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
ODC0S-I1 • ODC0S-I7 • ODC0S-I2
ODC0S-I
product data
INSTALLATION
The ideal location for the Self-Contained Occupancy
Sensor unit is in a ceiling area that provides a full
view of the space with an unobstructed path to the
entrance way(s), but out of line from hallway traffic. The sensor should be positioned at least 6 feet
from HVAC registers to prevent false triggering. The
ODC0S-I may be mounted directly to a three or fourinch octagon box. The sensor wires directly to the
lighting fixtures. An ODCCG protective cage is recommended to guard against accidental breakage.
-I1W
ODC0S-I1 • ODC0S-I7 • ODC0S-I2
-I2W
-I7W
Line Voltage
120V
220V
277V
Power Consumption
1.45W
1.31W
1.89W
Operational
Frequency
60Hz
50Hz
60Hz
Load Rating
Incandescent
1000W
1000W
1000W
Load Rating
Fluorescent
1000VA
500VA
2700VA
Wire Designation
TOP VIEW
13
0
13
SPECIFICATiONS
Electrical
Field of View (in feet)
FIELD-OF-VIEW
ODC0S-I Field-of-View (in feet)
SIDE VIEW
8
0
13
7
3
0
3
7
13
DIMENSIONAL DIAGRAM
ODC0S
Line - black, Neutral - white, Load - blue
Environmental
Operating
Temperature
32°F - 122°F (0°C - 50°C)
Storage
Temperature
14°F - 185°F (-10°C - 85°C)
Relative Humidity
20-90% Non-condensing
OTHER
Listings
UL Listed and CSA Certified,
Complies with CEC Title 24,
Complies with FCC Regulations
Warranty
WIRING DIAGRAMS
Limited Five-Year Warranty
ORDERING INFORMATION
Cat. NO.
Description
ODC0S-I1
ODC0S-I2
ODC0S-I7
Self-Contained Ceiling Mounted Occupancy
Sensor & Switching Relay
ODCCG
Protective Cage
* To indicate color, add suffix to the end of hte catalog number. White (-W)
ODC0S-I1 Wiring Diagram with optional switch for override to OFF
* Same wiring for all voltages.
leviton specification submittal
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting Management Systems
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/lms
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/lms
© 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8334/I10-ak
REV SEP 2010
PRODUCT DATA
OSFHU Passive Infrared Fixture Mount
High Bay Occupancy Sensor
BASIC OPERATION
Passive Infrared Technology (PIR) is used to sense
occupancy by comparing the infrared energy
from an object in motion and the background
space. PIR sensors minimize false ON from background environmental conditions such as air
movement to provide reliable detection of lineof-sight motion.
The OSFHU high-bay occupancy sensor is specifically designed for high mounted areas such
as warehouses, manufacturing and other high
ceiling applications. The OSFHU installs directly
to an industrial fluorescent luminaire or an electrical junction box. It is a self-contained sensor
and relay that turns individual light fixtures ON or
OFF based on occupancy in the detection zone.
It comes with three interchangeable lenses for
use in either a 360° high-bay or 360° low-bay
general area or an aisle way. The OSFHU provides
reliable coverage up to 40 ft. mounting heights.
The OSFHU is also available in a model for cold
storage applications with temperatures as low
as -40° F.
To improve the field-of-view for deep body
fixtures, a separate offset adapter accessory
(OSFLO or OSFOA) can be used to position the
sensor below the fixture body. The adapter simply snaps into a 1/2” knockout on the end of
the industrial fixture to attach the sensor. The
OSFHU and OSFLO/OSFOA provides the most
labor savings available with quick snap, 42” wire
leads, and no power required to configure.
INSTALLATION
The OSFHU mounts directly to an industrial fluorescent fixture or an electrical junction box
through a standard 1/2” knockout using the
provided lock-nut. Wiring is connected inside
the fixture body. For deep body fixtures, the
OSFLO or OSFOA accessory installs into the fixture 1/2” knockout using the provided lock-nut.
The OSFHU sensor is installed in one of three,
1/2” punch-outs positioning the OSFHU at the
correct field-of-view position flush or below the
fixture reflector assembly. When applicable, wiring is routed through the OSFLO or OSFOA to the
fixture body for wiring.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2012 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSFHU
OSFHU
PRODUCT DATA
FEATURES
Quicksnap: built into the 1/2” nipple, this locking
mechanism allows for the fastest and easiest mounting not requiring a threaded lock-nut
Reduce time and materials: easily reach the ballast
at either end of the fixture without requiring more
wire or connectors with the included 42” wire leads
Fast, easy time delay setting: can be set at any
time without requiring power to the sensor; time
delay is variable from 30s-20m
Instantly verify fixture operation and wiring
connections: “instant ON” closing relay fires lamps in
under 5 seconds
High Inrush Stability (H.I.S. Technology):
- Zero crossing circuitry optimizes relay operation
for reliable, long-life operation
- Robust mechanical latching relay is durable for
all load types
Auto temperature calibration: automatically
adjusts the PIR sensitivity as ambient temperature rises to increase detection of heat movement
through the field-of-view
OSFHU
Return to last state: for safety and energy savings,
the OSFHU contains a latching relay so that in the
event power is lost to the device, the device will
return to the last known state of the relay
False detection intelligence: for increased energy
savings and to mitigate nuisance tripping, the super
bright LED indicates advanced detection has been
activated and the lights will only turn ON when true
occupancy has been determined
FIELD-OF-VIEW
9.1m (30 ft)
High Bay
360˚
Top View
Side View
9.1m (30 ft)
6.1m (20 ft)
Aisle
Top View
3m (10 ft)
9.1m (30 ft)
6.1m (20 ft)
Low Bay
360˚
Top View
3m (10 ft)
0
0
3m (10 ft)
3m (10 ft)
6.1m (20 ft)
6.1m (20 ft)
9.1m (30 ft)
9.1m (30 ft)
0
0
Side View
6.1m (20 ft)
6.1m (20 ft)
9.1m (30 ft)
12.2m (40 ft)
12.2m (40 ft)
3m
9.1m 6.1m
(30 ft) (20 ft) (10 ft)
0
3m
6.1m 9.1m
(10 ft) (20 ft) (30 ft)
Hot (Black)
3.0m (10 ft)
0
3.0m (10 ft)
6.1m (20 ft)
OSFOA
9.1m (30 ft)
6.1m (20 ft)
9.1m (30 ft)
0
S
H
E
L
V
E
S
S
H
E
L
V
E
S
Side View
6.1m (20 ft)
OSFHU 3m
Wiring
Diagram
0
3m
6.1m 9.1m
9.1m 6.1m
(30 ft) (20 ft) (10 ft)
2.4m (8 ft)
7.6m (25 ft)
9.1m 6.1m 3.0m
(30 ft) (20 ft) (10 ft
(10 ft) (20 ft) (30 ft)
Black
Line
9.1m (30 ft)
120-277-347 VAC
50/60Hz
6.1m (20 ft)
9.1m (30 ft)
Low Bay
360˚
Top View
3m (10 ft)
0
9.1m (30 ft)
9.1m (30 ft)
0
0
S
H
E
L
V
E
S
S
H
E
L
V
E
S
OSFHU (480V) Wiring Diagram
Side View
2.4m (8 ft)
6.1m (20 ft)
12.2m (40 ft)
7.6m (25 ft)
3m
9.1m 6.1m
(30 ft) (20 ft) (10 ft)
3m
6.1m 9.1m
(10 ft) (20 ft) (30 ft)
White
3.0m (10 ft)
6.1m (20 ft)
6.1m (20 ft)
0
3m
6.1m 9.1m
(10 ft) (20 ft) (30 ft)
240/480V
50/60Hz
9.1m 6.1m 3.0m
(30 ft) (20 ft) (10 ft)
0
3.0m 6.1m 9.1m
(10 ft) (20 ft) (30 ft)
9.1m (30 ft)
Low Bay
360˚
Top View
6.1m (20 ft)
Sheet Metal* Punch Dimensions
for Optional Snap-In Installation
3.0m (10 ft)
0
3.0m (10 ft)
6.1m (20 ft)
9.1m (30 ft)
0
S
H
E
L
V
E
S
Side View
2.4m (8 ft)
6.1m (20 ft)
7.6m (25 ft)
3m
6.1m 9.1m
(10 ft) (20 ft) (30 ft)
Load
0
6.1m (20 ft)
9.1m (30 ft)
White
Sensor
Neutral (White)
3m (10 ft)
Side View
3.0m (10 ft)
Black
9.1m 6.1m 3.0m
(30 ft) (20 ft) (10 ft)
0
3.0m 6.1m 9.1m
(10 ft) (20 ft) (30 ft)
*18-22 Gauge Steel
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2012 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSFHU
Aisle
Top View
6.1m (20 ft)
Red
PRODUCT DATA
SPECIFICATIONS
ELECTRICAL
Input Voltage
120-230-277-347VAC;
240/480VAC (-I4W models)
Operational
Frequencies
50/60Hz
Load Rating
800VA @ 120VAC Ballast
1200VA @ 277VAC Ballast
1500VA @ 347VAC Ballast
2000VA @ 480VAC Ballast
Motor: 1/4 HP Load @ 120V
Standby Power
Consumption
120V – 130mW – .13W
277V – 450mW – .45W
347V – 460mW – .46W
Time Delay
30 seconds-20 minutes
(factory set to 30 sec – no power
required to set)
Wire Designation
-ITW/-CTW models:
Line-Black, Load-Red, Neutral-White
-I4W/-C4W models:
Line-Black, Load-Red, Load-Red
ENVIRONMENTAL
Operating
Temperature Range
14° F to 160° F (-10° C to 71° C)
Cold Storage
Operating
Temperature Range
-40° F to 160° F (-40° C to 71° C)
Storage
Temperature Range
-14° F to 160° F (-25° C to 71° C)
Relative Humidity
20% to 90% non-condensing
OSFHU
PHYSICAL
Dimensions
OSFHU: 3.50” H x 3.50” W x 1.25” D
OSFOA: 5.50” H x 2.00” W x 2.00” D
OSFLO: 4.325” H x 2.00” W x 2.00” D
Construction
High-impact, injection molded plastic
housing
Color
White
OTHER
Agency Listings
UL and CUL Listed (OSFHU models)
Warranty
Limited 5-Year
ORDERING INFORMATION
CAT. NO.
DESCRIPTION
OSFHU-ITW
PIR Fixture Mount High Bay Sensor with 3 Interchangeable Lenses, White
OSFHU-CTW
PIR Fixture Mount High Bay Sensor with 3 Interchangeable Lenses for Cold Storage, White
OSFHU-I4W
PIR Fixture Mount High Bay Sensor with 3 Interchangeable Lenses, 480V, No Neutral, White
OSFHU-C4W
PIR Fixture Mount High Bay Sensor with 3 Interchangeable Lenses for Cold Storage, 480V, No Neutral, White
OSFOA-00W
Offset Adapter Accessory for OSFHU, 3 Position, White
OSFLO -00W
Offset Adapter Accessory for OSFHU, 1 Position, White
OSFCG -00W
Protective Cage for Fixture Mounted Sensors
NAFTA and Made in USA models available.
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2012 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7366G/A12-tb
REV JAN 2012
G-6987A ODC04-I rev
2/17/05
10:57 AM
Page 1
OSC04-IOW
OSC15-IOW
Occupancy Sensor
Infrared Ceiling Sensor
The all-digital & microprocessor based OSCxx-I
is the most advanced infrared ceiling sensor
available. Self-calibrating sensitivity and timer
allow the installer to “install & forget.”
THE OSCXX-I OCCUPANCY DETECTOR
• PASSIVE INFRARED TECHNOLOGY (PIR)
• SIMPLE, FAST INSTALLATION
• SELF-ADJUSTING
• DIGITAL TECHNOLOGY, COMPLETE RELIABILITY
• PHOTOCELL CONTROL
• IMMUNITY TO AIR CURRENTS
GENERAL OPERATION
The OSCxx-IOW Infrared Ceiling Sensor is a low voltage occupancy
detector that works in conjunction with the Leviton OSPxx power
pack to control lighting. The detector’s main function is to turn the
lights on or maintain the lights on while movement is detected
within the sensor’s range and to turn the lights off when the space
is left unoccupied.
The sensor uses a small semiconductor heat detector that resides
behind a multi-zone optical lens. This Fresnel lens establishes
dozens of zones of detection. The sensor is sensitive to the heat
emitted by the human body. In order to trigger the sensor, the
source of heat must move from one zone of sensing to another.
Non-moving hot objects will not cause the lights to turn on.
Small Size: Installed sensor appears almost invisible.
Fast, Simple Installation: Easy ceiling mount, three wire connection
(low voltage) and twist-lock sensor attachment.
Self-Adapting: An internal microprocessor continually analyzes, evaluates
and adjusts settings. Performance is kept at a maximum and user
complaints are eliminated.
Maximum Reliability, Low Cost: All digital circuitry uses a minimum of
components.
Timer Setting: Automatic - 30s to 30 min. Manual and Automatic.
Test mode - 6 sec.
Ambient Light Recognition: A photocell prevents lights from turning on
when the room is adequately lit by natural light.
Non-Volatile Memory: Learned and adjusted settings saved in protected
memory are not lost during power outages.
HOW THE ODC04-I AUTOMATICALLY ADAPTS
Condition
Timer Left In Test Mode - The
sensor remains in an 6 sec.
test mode.
Example
An installer accidentally leaves
the sensor in the 6 sec. timer
test mode and the lights may go
off or on every 6 sec.
Adaptive Reaction
The sensor automatically resets the timer
to 10 min after
.
15 .min of test mode.
False-On -The sensor
incorrectly turns the lights on.
The sensor detects movement
in the corridor or hallway and
the room lights turn on.
After an initial movement is sensed,
if another movement is not sensed within
the timer setting then the delayed off time
setting is automatically reduced.
False-Off -The sensor
incorrectly turns the lights off.
The sensor does not detect
movement because an
occupant sits virtually
motionless at a desk and the
lights turn off.
If motion is sensed within a short period after
the lights go off, then the current delayed
off-time setting is increased.
A dedicated internal microprocessor continually analyzes
the room environment and adjusts itself automatically.
The internal timer and infrared sensitivity are automatically
adjusted. Once installed, the OSCxx does not require
manual adjustment or calibration.
OSC04-IOW OSC15-IOW
At a distance close to the sensor,
slight movement can be sensed.
As the distance away from the sensed
increases, the space between the
zones of sensitivity increases, and
therefore the amount of motion
required to trigger the sensor
increases.
FEATURES
SPECIFICATION SUBMITTAL
JOB NAME:
CATALOG NUMBERS:
JOB NUMBER:
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
1
G-6987A ODC04-I rev
2/17/05
10:57 AM
Page 2
Product
Specifications
OSC04-IOW
OSC15-IOW
.........................
PRODUCT SPECIFICATIONS
RANGES
OSC15
Models
Part Number
OSC04-IOW
OSC15-IOW
Lens Type
Coverage
Additional Features
High Density
Extended Range
450 sq. ft.
1500 sq. ft
Photocell
Photocell
TOP VIEW
20
10
CONTROLS
PIR (Infrared Sensitivity): High to low.
Timer Adjustment (Manual): 30s - 30 min. - Factory set 10 min.
PC (Photocell Adjustment): 20 to 3,000 Lux - Factory set 3,000 Lux (Disable photocell)
0
10
DIP switch settings
Switch
A1
A2
A3
A4
B1
B2
B3
B4
Switch Functions
Bank A
N/A
N/A
Manual Mode
Walk-Thru Disable
Bank B
Override to On
Override to Off
Test Mode
LED Disable
OFF
—
—
Auto Adapting Enabled
Walk-Thru Enabled
Auto Mode
Auto Mode
OFF¡ON¡OFF
LEDS Enabled
Field of View (in feet)
20
Switch Settings
ON
—
—
Auto Adapting Disabled
Walk-Thru Disabled
SIDE VIEW
8
0
20
15
3 5.6
20
15
9 11
Field of View (in feet)
OSC04
Lights forced On
Lights forced Off
Enter/Exit Test Mode
LEDS Disabled
0
5.6 3
11 9
TOP VIEW
12
5
INDICATOR
Red LED Lamp: Infrared motion.
0
SPECIFICATIONS
Construction: Housing -- Rugged, high-impact,
injection molded plastic. Color coded leads are 6” long (16.24
cm).
Size & Weight: 4.5” dia., 1.5” height; 5 oz.
(114 mm dia., 38 mm height; 142 g).
Power Requirements: 24 VDC, 20mA from the
OSPxx-series power pack.
Output: 24 VDC active high logic control signal with short circuit
protection.
Operating Environment: 32°F to 104°F (0°C to 40°C); 0% to
95% relative humidity, non-condensing. For indoor use only.
Warranty: 5 yrs.
5
12
Major Motion, IR
9
12
7
5
3
0
OSPxx Series Power Pack
Black
Blue
(control)
Red
Black
Blue* (occupancy)
Red
Black
Blue
12
Neutral (White)
CATALOG NUMBERS:
JOB NUMBER:
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
G-6987A/C4-tp
Blue* (occupancy)
Gray*
(photocell
+ occupancy)
Load
White
White
Blue
Black
VAC60Hz
Visit our Website at: www.leviton.com
9
Black
Hot
Black
Line 120/277/347
2
7
NC-Brown
Common-Green
NO-Brown/White
To HVAC System
Gray*
JOB NAME:
5
Sensor
(photocell
+ occupancy)
SPECIFICATION SUBMITTAL
3
PHYSICAL WIRING
Red (24VDC)
*When the photocell function is not being used, connect the Blue Occupancy Sensor lead to the
Blue Power Pack lead. When using the Photocell function, connect the Gray Occupancy Sensor lead
to the Blue Power pack lead–Do not use the Blue Occupancy Sensor lead for the photocell function.
Minor Motion, IR
SIDE VIEW
8
product data
Multi-Technology Ceiling
Occupancy Sensor
• Self-Adjusting: Internal microprocessor con­tin­ua
­ l­ly
analyzes, evaluates and adjusts the sensitivity and
time delay. Performance is kept at a maximum and
user complaints are eliminated.
• Custom off-white color matched for shaded ceilings.
• Fast, Simple In­stal­la­tion: Easy ceiling mount, three
wire con­nec­tion (low voltage) and twist-lock sensor attachment for 360° rotation and flexibility.
• Maximum Reliability, Low Cost: digital circuitry uses
a minimum of components.
• Small Motion Sensitivity: The ultrasonic tech­nol­o­gy
provides excellent small motion sensitivity.
• Timer Setting Feature: Automatic – 30sec – 30min.
Test mode – 6sec with auto exit programming.
• Non-Volatile Memory: Learned and adjusted settings saved in protected memory are not lost during power outages.
• Walk-Through: Provides increased energy savings
by decreasing the time delay to 2.5min when someone momentarily walks through the monitored
space.
• Wide Coverage: Units from 500 to 2000 sq. ft. available.
• Power base (OPB 15) available for line voltage applications
• Ambient Light Recognition: A Light Sensor prevents
lights from turning on when the room is adequately
lit by natural light.
• Ultrasonic (U/S) Components: One or two U/S
transducers and one or two narrow bandwidth
receivers each 16mm in diameter. Frequency -Crystal controlled to ±.005%.
• Device: Rug­ged, high-im­pact, in­jec­tion molded plas­
tic, off -white. Col­or coded leads 6” (16.24 cm).
Basic Operation
Occupancy sensors have two tasks: 1) Keeping the
lights ON while the room is occupied, and 2) Saving
energy by keeping the lights OFF while the room is
unoccupied.
Passive Infrared (PIR) is an excellent and precise
technology for initially turning the lights ON, but lacks
sensitivity for minor motion at distances. Ultrasonic
(U/S) technology provides maximum sensitivity with
continuous reflective high frequeny waves. This is
opitmal for keeping the lights ON.
Leviton’s multi-technology sensor combines the
benefits of both PIR and U/S technologies for unrivaled performance and reliability.
APPLICATIONS
• Cafeterias
• Computer rooms
• Day care centers
• Workspaces
• Offices with cubicles • Restrooms
• Storage rooms
• Classrooms
• Conference rooms
• Filing rooms
• Open warehouses
• Open areas
• Stairwells
• Executive, open,
and private offices
How The OSCxx-M Automatically Adapts
Condition
Timer Left In Test Mode - The
sensor remains in an 6 sec.
test mode.
Example
An installer accidentally leaves
the sensor in the 6 sec. timer
test mode and the lights may go
off or on every 6 sec.
Self-Adaptive Reaction
The sensor automatically resets the timer
to 10 min after
.
15 min of test mode.
False-On - The sensor
incorrectly turns the lights on.
The sensor detects movement
in the corridor or hall way and
the room lights turn on.
After an initial movement is sensed,
if another mov ement is not sensed within
the timer setting then the delayed off time
setting is automatically reduced.
False-Off - The sensor
incorrectly turns the lights off.
The sensor does not detect
movement because an
occupant sits virtually
motionless at a desk and the
lights turn off.
If motion is sensed within a short period after
the lights go off, then the current delayed
off-time setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSCxx-M0W
Features
product data
Dimensions
DIP switch settings
Switch
Switch Functions
Switch Settings
Bank AOFFON
A1
N/A
Multi-Tech
Single Tech
A2
N/A
PIR
Ultrasonic
A3
Manual Mode
Auto Adapting Enabled Auto Adapting Disabled
A4
Walk-Thru Disable Walk-Thru Enabled
Walk-Thru Disabled
Bank B
Override to On
Auto Mode
Lights forced On
B1
B2
Override to Off
Auto Mode
Lights forced Off
B3
Test Mode
OFF’ON’OFF Enter/Exit Test Mode
B4
LED Disable
LEDs Enabled
LEDs Disabled
1.571”
4.200”
*Bold items are factory defaults
field-of-view
SPECIFICATIONS
TOP VIEW
ELECTRICAL20
20
Power Requirements
20
16
24 VDC, from11.5OSPxx Power Pack or OPB15
Power Base 8.5
11.5
8.5
Power Consumption
11.5
OSC05: 25mA, OSC10: 35mA, OSC20: 30mA
0
0
0
Output
TOP VIEW
TOP VIEW
24 VDC active high logic control signal with
short circuit protection
8.5
8.5
11.5
11.5
11.5
CONTROLS
16
20
Ultrasonic Sensitivity
0-100%; green knob (factory setting: 50%)
SIDE VIEW
8
Infrared Sensitivity
SIDE VIEW
0-100%; red knob;
(factory setting:
75%)
8
20
20
Light Sensor
0
0
3 5.6
Time Delay
OCS05-M0W
9 11
15
20 to 3,000 Lux; blue knob; factory set at
0
20
20
15 11 9 5.6 3 0 3 5.6 9 11 15
100%
(*grey wire23required)
23
17
17
17
20
32
23
30sec-30min;OSC10-M0W
black knob (factory setting:
10min)
OSCxx-M0W
11 9 5.5 3 0 3 5.5 9 11
15
20
22.5
32
TOP VIEW
20
TOP VIEW
20
20
U/S motion technology
Red LED
Infrared motion technology
20
8.5
0
0
8.5
8.5
8.5
20
SIDE VIEW
8
SIDE VIEW
0 0
0 03 5.6
3 5.6
9 119 11
15
Multi-Technology Ceiling Sensor, 500 sq. feet
of coverage
Multi-Technology Ceiling Sensor, 1000 sq.
feet of coverage
OSC20-M0W
Multi-Technology Ceiling Sensor, 2000 sq
feet of coverage
SIDE VIEW
SIDE VIEW
23
20
8
15 2011 9 155.6 11
3 90 5.6
3 5.6
15 92011 15
3 90 113 5.6
20
17
23
23
17
23
17
17
OSC10-M, 1000 sq. ft.
OSC10-M0W
OSC10-M0W
Physical Wiring
Sensor
OSPxx Series Power Pack
Major Motion, IR
Minor Motion,
MajorUltrasonic
Motion, IR
Red (24VDC) Minor Motion, Ultrasonic
Major Motion, Ultrasonic
Black
Blue
NC-Brown
Common-Green
NO-Brown/White
To HVAC System
Major Motion, Ultrasonic
(control)
Red
Black
Blue* (occupancy)
Gray*
Black
OSC10-M0W
0
0
1520 2320
23
17
17
OSC05-M, 500 sq. ft.
ORDERING INFORMATION
OSC05-M0W
20
8
8
OCS05-M0W
OCS05-M0W
Limited Five-Year Warranty
DESCRIPTION
16
20
20
20
8
CAT NO.
11.5
11.5
OTHER
CUL/US Certified, meets ASHRAE Standard
90.1 and CEC Title 24 requirements
11.5
11.5
11.5
Listings
0
0
0
8.5
8-12 feet
11.5
8.5
8.5
32°F to 104°F (o°C to 40°C)
16
8.5
11.5
11.5
Major Motion, Ultrasonic
Mouting Height
20
11.5
Minor Motion, Ultrasonic
0% to 95% non-condensing, for indoor use
only
TOP VIEW
11.5
Major Motion, IR
ENVIRONMENTAL
Warranty
15
OSC20-M, 2000 sq. ft.
TOP VIEW
Green LED
Relative Humidity
20
22.5
OSC20-M0W
INDICATORS
Operating
Temperature Range
Major Motion, PIR
SIDE VIEW
8
(photocell
+ occupancy)
Red
Black
NAFTA compliant and Made in USA models available
Hot
Black
Blue
Black
Blue* (occupancy)
Gray*
(photocell
+ occupancy)
Load
White
120/277/347
VAC60Hz
White
Line
Blue
Neutral (White)
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8357/G10-cb
32
OSC20-M0W
product data
Basic Operation
Occupancy sensors have two tasks: 1) Keeping the
lights ON while the room is occupied, and 2) Saving
energy by keeping the lights OFF while the room is
unoccupied.
Leviton’s OSCxx-RMW sensors combine the benefits of both PIR and U/S technologies for unrivaled
performance and reliability. Additionally, the sensor
is designed with an isolated relay contact; which
enables the sensor to interface with other systems
(example: BAS, HVAC or any dry-contact capable
device or system).
APPLICATIONS
• Cafeterias
• Computer rooms
• Day care centers
• Workspaces
• Restrooms
• Offices with cubicles Features
• Classrooms
• Conference rooms
• Stairwells
• Executive, open,
and private offices
•Multi-Technology: By using both PIR and U/S signals,
the sensor minimizes false triggering for high reliability.
• Isolated Relay: Supports HVAC or other Class 2 low
voltage signals
• Supports both 24VAC/VDC power supplies
• Wide Coverage: Units from 500 to 2000 sq. ft. available.
• Self-Adjusting: Internal microprocessor con­tin­u­al­ly
analyzes, evaluates and adjusts the sensitivity and
time delay. Performance is kept at a maximum and
user complaints are eliminated.
• Custom white color matched for most common daylight harvesting architecture
• Uses OSPxx Series Power Pack: Uses Class 2, 24
volt wiring, three wire connection (low voltage).
Multiple sensors can control single or multiple
power packs.
• Additional mid-range lens assembly included for
applications with mounting heights between 12’20’
• Fast, Simple In­stal­la­tion: Easy ceiling mount, twistlock sensor attachment for 360° rotation and flexibility.
• Small Motion Sensitivity: The ultrasonic tech­nol­o­gy
provides excellent small motion sensitivity.
• Timer Setting Feature: Automatic – 30sec – 30min.
Test mode – 4sec with auto exit programming.
• Non-Volatile Memory: Learned and adjusted settings saved in protected memory are not lost during power outages.
• Walk-Through: Provides increased energy savings
by decreasing the time delay to 2.5min when someone momentarily walks through the monitored
space.
• Ultrasonic (U/S) Components: One or two U/S
transducers and one or two narrow bandwidth
receivers each 16mm in diameter. Frequency -Crystal controlled to ±.005%.
• Device: Rug­ged, high-im­pact, in­jec­tion molded plas­
tic, white. Col­or coded leads 7” (17.78 cm).
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSCxx-RMW
Multi-Technology Ceiling
Occupancy Sensor with Isolated Relay
product data
How The OSCxx-R Automatically Adapts
Condition
Timer Left In Test Mode - The
sensor remains in an 4 sec.
test mode.
Example
An installer accidentally leaves
the sensor in the 4 sec. timer
test mode and the lights may go
off or on every 4 sec.
Adaptive Reaction
The sensor automatically resets the timer
to the preset time delay after 15 minutes of
test mode
False-On - The sensor
incorrectly turns the lights on.
The sensor detects movement
in the corridor or hallway and
the room lights turn on.
After an initial movement is sensed,
if another movement is not sensed within
the timer setting then the delayed off time
setting is automatically reduced.
False-Off - The sensor
incorrectly turns the lights off.
The sensor does not detect
movement because an
occupant sits virtually
motionless at a desk and the
lights turn off.
If motion is sensed within a short period after
the lights go off, then the current delayed
off-time setting is increased.
*Bold items are factory defaults
**This setting is only used if the Single Techonology Option (Switch A1) is selected
field-of-view
TOP VIEW
20
TOP VIEW
20
TOP VIEW
TOP VIEW
20
20
8.5
11.5
20
11.5
11.5
11.5
11
16
8.5
8.5
8.5
0
0
0
TOP VIEW
20
11.5
11.5
16
0
0
0
8.5
8.5
11.5
16
11
8.5
11.5
8.5
11.5
11.5
11.5
16
11.5
20
20
SIDE VIEW
15
20
23
17
20
20
8
8
9 11
OSCxx-RMW
Sidebar
Title Goes Here
OSCxx-RMW
DIP switch settings
Switch
Switch Functions
Switch Settings
Bank AOFFON
A1 Single/Multi-tech Multi-Tech
Single Tech
A2 PIR/Ultrasonic PIR**Ultrasonic
A3
Manual Mode
Auto Adapting Enabled Auto Adapting Disabled
A4
Walk-Thru Disable Walk-Thru Enabled
Walk-Thru Disabled
Bank B
Override to On
Auto Mode
Lights forced On
B1
B2
Override to Off
Auto Mode
Lights forced Off
B3
Test Mode
OFF’ON’OFF Enter/Exit Test Mode
B4
LED Disable
LEDs Enabled
LEDs Disabled
20
22.5
32
15
11 9 5.5 3 0 3 5.5 9 11
15
SIDE VIEW
SIDE VIEW
0
32
Major Motion, PIR
OSC20-M0W
20
8
0
20
22.5
20
0
23
23
SIDE VIEW
0
Major Motion, IR
MinorMotion,
Motion,IR
Ultrasonic
Major
Major Motion, Ultrasonic
Minor Motion, Ultrasonic
Major Motion, Ultrasonic
15ft
20ft
30ft
25ft
20ft
15ft
10ft
5ft
0
5ft
Mid-Bay Lens
10ft
15ft
20ft
25ft
30ft
20
9 95.65.6
3 30
2017 1515 1111
17
OSC10-M0W
OSC10-M0W
OSC05-R, 500 sq. ft.
10ft
8
00
3 5.6
30 5.6
9 119 1115 15 2020 23
17 17 23
OCS05-M0W
OCS05-M0W
OSC20-R, 2000 sq. ft.
SIDE VIEW
SIDE VIEW
8
8
30 5.6
9 11 9 15
20
3 5.6
11 15
20
23
23
17
17
OSC10-R, 1000 sq. ft.
OSC20-MO
Physical Wiring
Sensor
OSPxx Series Power Pack
Bas
(Or Other
Building
Management
System)
Red
Black
Blue
(Control)
Red
Black
N/C – Brown
Common – Green
Blue
+24v - Red
Com - Black
Control - Blue
N/C - Brown
Common - Green
N/O - Brown/white
N/O – Brown/White
Load
Blue
Hot (Black)
Red
Blue
Black
Black
Occupancy
Sensor
Black
To BAS System
Line
120-277-347 VAC
60 Hz
To BAS System
Blue
White
N/C – Brown
Common – Green
N/O– Brown/White
White
Neutral (White)
SPECIFICATIONS
Power Requirements
15-28 VAC/VDC from OSPxx Power Pack or other Class 2
power supplies
Isolated Relay
1A @ 30VAC/VDC
Power Consumption
DC: OSC05: 25mA, OSC10: 30mA, OSC20: 30mA
AC: OSC05: 45mA, OSC10: 50mA, OSC20: 50mA
Output
24 VDC active high logic control signal with short circuit
protection
CONTROLS
Ultrasonic Frequency
OSC05/OSC10: 40kHz
OSC20: 32kHz
Ultrasonic Sensitivity
0-100%; green knob (factory setting: 50%)
Infrared Sensitivity
0-100%; red knob; (factory setting: 75%)
Time Delay
30sec-30min; black knob (factory setting: 10min)
INDICATORS
Green LED
U/S motion technology
Red LED
Infrared motion technology
ENVIRONMENTAL
Operating
Temperature Range
32°F to 104°F (o°C to 40°C)
Relative Humidity
0% to 95% non-condensing, for indoor use only
OTHER
Mouting Height
Low-range lens (default) 8-12 feet
Mid-range lens 12-20 feet
Dimensions
4.2” W x 1.57” D
Listings
CUL/US Certified, meets ASHRAE Standard 90.1 and CEC
Title 24 requirements
Warranty
Limited Five-Year Warranty
ORDERING INFORMATION
CAT NO.
DESCRIPTION
OSC05-RMW
Multi-Technology Ceiling Sensor, 500 sq. feet of coverage
OSC10-RMW
Multi-Technology Ceiling Sensor, 1000 sq. feet of coverage
OSC20-RMW
Multi-Technology Ceiling Sensor, 2000 sq feet of coverage
NAFTA compliant and Made in USA models available
Leviton Mfg. Co., Inc. Lighting Management Systems
20497 SW Teton Avenue, Portland, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 www.leviton.com/lms
© 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Sidebar
OSCxx-RMW
Title Goes Here
ELECTRICAL
OSCxx-RMW
product data
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8579/E11-cb
product data
BASIC Operation
Occupancy sensors have two tasks: 1) Keeping the
lights ON while the room is occupied, and 2) Saving
energy by keeping the lights OFF while the room is
unoccupied.
Passive Infrared (PIR) is an excellent and precise technology for initially turning the lights ON, but lacks
sensitivity for minor motion at distances. Ultrasonic
(U/S) technology provides maximum sensitivity with
continuous reflective high frequeny waves. This is
opitmal for keeping the lights ON.
Leviton’s OSW12 sensor combines the benefits of both
PIR and U/S technologies for unrivaled performance
and reliability.
APPLICATIONS
• Cafeterias
• Classrooms
• Conference rooms
• Computer rooms
• Day care centers
• Filing rooms
• Offices with cubicles
• Open areas
• Partitioned restrooms
• Storage rooms
• Workspaces
• Open warehouses
• Executive, private and open offices
Features
•Multi-Technology: By using both PIR and U/S signals,
the sensor minimizes false triggering for high reliability.
How The OSW12-M Automatically Adapts
• Flexible Base Mounting: Supplied twist-and-lock base
mount permits fast alignment. Supplied cover hides
mounting hardware and wires. Can be used with raceways for hard surface installations. Adjustable canopy
for wall or ceiling mount.
• Wide Coverage: Over 1200 sq. ft of coverage.
• Fast, Simple Installation: A single mounting post and
three color coded wires make installation easy.
­ l­ly
• Self-Adjusting: Internal microprocessor con­tin­ua
analyzes, evaluates and adjusts sensitivity and time
delay settings. Per­for­mance is kept at a max­i­mum and
user complaints are eliminated.
• Non-Volatile Memory: Learned and adjusted settings
saved in protected memory are not lost during power
outages.
• Timer Setting Feature: Automatic – 30sec – 30min.
Test mode – 6sec with auto exit programming.
• Ambient Light Recognition: A Light Sensor prevents
lights from turning on when the room is adequately lit
by natural light.
• Walk-Through: Provides increased energy savings by
decreasing the time delay to 2.5min when someone
momentarily walks through the monitored space.
• Custom off-white color matched for shaded ceiling/
corner spaces and most common ceiling tiles.
• Uses OSPxx Series Power Pack: Uses Class 2, 24 volt
wiring, three wire connection (low voltage). Multiple
sensors can control single or multiple power packs.
• Power base (OPB 15) available for line voltage applications
• High Motion Sensitivity: The large lens area and
multi-element lens design give excellent range and
sensitivity.
• Infrared Sensing: High sensitivity 9.8 micron detector
dual element.
• Device: High-impact housing and in­jec­tion molded
plastic. Color coded wire leads are 6” long (16.24 cm).
• Lens: 110˚ aperture, lens opening 2.2” x 1.47”,
36 elements (72 zones) small motion range
31 ft, large motion 68 ft
Condition
Timer Left In Test Mode - The
sensor remains in an 6 sec.
test mode.
Example
An installer accidentally leaves
the sensor in the 6 sec. timer
test mode and the lights may go
off or on every 6 sec.
Self-Adaptive Reaction
The sensor automatically resets the timer
to 10 min after
.
15 min of test mode.
False-On - The sensor
incorrectly turns the lights on.
The sensor detects movement
in the corridor or hall way and
the room lights turn on.
After an initial movement is sensed,
if another mov ement is not sensed within
the timer setting then the delayed off time
setting is automatically reduced.
False-Off - The sensor
incorrectly turns the lights off.
The sensor does not detect
movement because an
occupant sits virtually
motionless at a desk and the
lights turn off.
If motion is sensed within a short period after
the lights go off, then the current delayed
off-time setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSW12-M0W
Multi-Technology Wall/Corner
Occupancy Sensor
product data
Adjustment Range
Mounting Bracket
Dimensions
Base Cover
Sensor
Mounting
Base
Base Cover
Long
Range
Lens
6.43 inch
Mounting
Base
4.23 inch
4.67 inch
Sensor
DIP switch settings
Switch
Switch Functions
Switch Settings
Bank AOFF
ON
A1
N/A
Multi-Tech
Single Tech
A2
N/A
PIR
Ultrasonic
A3
Manual Mode
Auto Adapting Enabled Auto Adapting Disabled
A4
Walk-Thru Disable Walk-Thru Enabled
Walk-Thru Disabled
BANK B
B1
Override to On
Auto Mode
Lights forced On
B2
Override to Off
Auto Mode
Lights forced Off
B3
Test Mode
OFF’ON’OFF
Enter/Exit Test Mode
B4
LED Disable
LEDs Enabled
LEDs Disabled
2.80 inch
field-of-view
Field of View (in feet)
TOP VIEW
58
31
*Bold items are factory defaults
16
11.5
SPECIFICATIONS
ELECTRICAL
0
Power Requirements
24 VDC, 25 mA (.6W) from OSPxx Power Pack or
OPB15 Power Base
Power Consumption
25mA Stand-by
Output
24 VDC active high logic control signal with short
circuit protection
11.5
16
31
Minor Motion, IR
Major Motion, IR
58
Minor Motion, Ultrasonic
OSW12-M0W
CONTROLS
Ultrasonic (U/S)
Sensitivity
0 to 100%: red knob (factory setting: 75%)
Infrared Sensitivity
0 to 100%: green knob (factory setting: 50%)
Light Sensor
Blue knob 20 to 3,000 Lux. Factory set at 100%
(Grey wire required)
Time Delay
30sec-30min; black knob (Factory setting: 10min)
SIDE VIEW
8
0
03 8
15
23
Major Motion, Ultrasonic
68
31
32
INDICATORS
Red LED
Infrared motion technology
Green LED
Ultrasonic (U/S) motion technology
Physical Wiring
NC-Brown
Common-Green
NO-Brown/White
ENVIRONMENTAL
Operating Temperature
Range
32°F to 104°F (o°C to 40°C)
Relative Humidity
0% to 95% non-condensing, for indoor use only
OTHER
Mouting Height
8-10 feet
Listings
CUL/US Certified, meets ASHRAE Standard 90.1
and CEC Title 24 requirements
Warranty
Red (24VDC)
Black
CAT NO.
DESCRIPTION
OSW12-M0W
Multi-Technology Wall/Corner Occupancy Sensor
NAFTA compliant and Made in USA models available
Sensor
Blue
(Control)
Black
Red
OSPxx Series
Power Pack
Black
Blue*
(occupancy)
Gray*
Blue
Hot (Black)
(photocell +
occupancy)
Blue
Line
120-277-347VAC
60Hz
Load
Red
Black
Limited Five-Year Warranty
ORDERING INFORMATION
To HVAC
System
Black
White
Blue*
(occupancy)
Gray*
(photocell +
occupancy)
Neutral (White)
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7732A/G10-cb
White
product data
BASIC Operation
Specifically designed for long, relatively narrow spaces
such as warehouse aisle and corridors, the OSWHBI0W Occupancy Sensor provides long range and high
sensitivity.
The OSWHB-I0W Occupancy Sensor is a “high bay” lens.
This lens provides coverage up to 55 ft. when mounted
20 ft. above the floor. Can be mount­ed lower if needed.
The mount­ing base, pro­vid­ed with the sensor, allows
quick and easy mount­ing in cor­ners, on walls or on
ceilings. The most common applications are factory
storage areas, warehouse aisles and corridors.
APPLICATIONS
• Hallways
• Cafeterias
• Parking garages • Stairwells
• Warehouses
• Workspaces
• Loading docks
• Storage rooms
Features
• Fast, Sim­ple Installation: Easy base mount, three wire
connection (low voltage) and twist-and-lock detector
attachment.
• Self-Adjusting: Internal microprocessor con­tin­ua
­ l­ly
analyzes, evaluates and adjusts the infrared sen­si­
tiv­i­ty and time delay. Per­for­mance is kept at a max­i­
mum and user com­plaints are eliminated.
• Flexible Base Mounting: Supplied twist-and-lock base
mount permits fast alignment. Supplied cover hides
mounting hardware and wires. Can be used with
How The OSwhb-i Automatically Adapts
raceways for hard surface installations. Adjustable
canopy for wall or ceiling mount.
• Range & Coverage: Up to 55 ft. for gross body
motion or forklift. Max. 7 feet wide.
• Multi-element, high bay lens for mounting up to 30
feet.
• Power base (OPB15) available for line voltage applications.
• Ambient Light Recognition: A Light Sensor prevents
lights from turning on when the room is adequately
lit by natural light.
• Non-Volatile Memory: Learned and ad­just­ed settings
saved in protected memory are not lost during power
outages.
• Timer Setting Feature: Automatic – 30sec – 30min.
Test mode – 6sec with auto exit programming.
• Walk-Through: Provides increased energy savings by
decreasing the time delay to 2.5min when someone
momentarily walks through the monitored space.
• High Motion Sensitivity: Large lens area and multi-element lens design gives excellent range and sensitivity.
• Custom off-white color matched for shaded ceiling/
corner spaces and most common ceiling tiles.
• Uses OSPxx Series Power Pack: Uses Class 2, 24 volt
wiring, three wire connection (low voltage). Multiple
sensors can control single or multiple power packs.
• Device: High-impact housing and in­jec­tion molded
plastic. Color coded wire leads are 6” long (16.24 cm).
• Infrared Sensing: High sensitivity 9.8 micron detector
dual element.
Condition
Timer Left In Test Mode - The
sensor remains in an 6 sec.
test mode.
Example
An installer accidentally leaves
the sensor in the 6 sec. timer
test mode and the lights may go
off or on every 6 sec.
Self-Adaptive Reaction
The sensor automatically resets the timer
to 10 min after
.
15 min of test mode.
False-On - The sensor
incorrectly turns the lights on.
The sensor detects movement
in the corridor or hall way and
the room lights turn on.
After an initial movement is sensed,
if another mov ement is not sensed within
the timer setting then the delayed off time
setting is automatically reduced.
False-Off - The sensor
incorrectly turns the lights off.
The sensor does not detect
movement because an
occupant sits virtually
motionless at a desk and the
lights turn off.
If motion is sensed within a short period after
the lights go off, then the current delayed
off-time setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSWHB-I0W
Passive Infrared Aisle (High Bay)
Occupancy Sensor
product data
adjustment Range
Mounting Bracket
Dimensions
60°
Mounting
Base
85°
Base Cover
Long
Range
Lens
6.43 inch
4.23 inch
4.67 inch
Sensor
DIP switch settings
Switch
Switch Functions
Switch Settings
Bank AOFFON
N/A
A1
A2
N/A
A3
Manual Mode
Auto Adapting Enabled Auto Adapting Disabled
A4
Walk-Thru Disable Walk-Thru Enabled
Walk-Thru Disabled
Bank B
B1
Override to On
Auto Mode
Lights forced On
B2
Override to Off
Auto Mode
Lights forced Off
B3
Test Mode
OFF’ON’OFF Enter/Exit Test Mode
B4
LED Disable
LEDs Enabled
LEDs Disabled
2.80 inch
Field-of-viewField of View (in feet)
TOP VIEW
3.5
0
3.5
*Bold items are factory defaults
SIDE VIEW
30
SPECIFICATIONS
ELECTRICAL
Major Motion, PIR
Power Requirements
24 VDC, 15mA (.36W) from OSPxx Power Pack or OPB15
Power Base
Power Consumption
15mA Stand-by
Output
24 VDC active high logic control signal with short circuit
protection
OSWHB-I0W
CONTROLS
0
Infrared Sensitivity
0 to 100%: red knob (factory setting: 75%)
Light Sensor
Adjustment
Blue knob 20 to 3,000 Lux. Factory set at 100% (Grey
wire required)
Time Delay
30sec-30min; black knob (Factory setting: 10min)
INDICATORS
Red LED
3
13
25
55'
OSWHB-I0W
Physical Wiring
Infrared motion technology
ENVIRONMENTAL
Operating
Temperature Range
Relative Humidity
NC-Brown
Common-Green
NO-Brown/White
32°F to 104°F (o°C to 40°C)
To HVAC
System
Red (24VDC)
Black
0% to 95% non-condensing, for indoor use only
OTHER
Mounting Height
8-10 feet
Listings
CUL/US Certified, meets ASHRAE Standard 90.1 and
CEC Title 24 requirements
Sensor
Blue
(Control)
Black
Red
OSPxx Series
Power Pack
Black
Blue*
(occupancy)
Warranty
Hot (Black)
CAT NO.
DESCRIPTION
OSWHB-I0W
Infrared Aisle (High Bay) Occupancy Sensor
(photocell +
occupancy)
Blue
Line
120-277-347VAC
60Hz
Load
Red
Black
Limited Five-Year Warranty
ORDERING INFORMATION
Gray*
Blue
Black
White
Blue*
(occupancy)
Gray*
(photocell +
occupancy)
Neutral (White)
NAFTA compliant and Made in USA models available
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7734A/G10-cb
White
product data
BASIC Operation
Specifically designed for long, relatively narrow spaces
such as hallways and corridors, the OSWLR-I Occupancy
Sensor provides long range and high sen­si­tiv­i­ty.
The OSWLR-I Occupancy Sensor utilizes a “long range”
lens. This lens provides coverage up to 100 ft. when
mounted 10 ft. above the floor. Can be mount­ed lower
if needed.
The mount­ing base, pro­vid­ed with the sensor, allows
quick and easy mount­ing in cor­ners, on walls or on ceilings. The most common applications are factory storage areas, warehouse aisles and corridors.
Applications
• Hallways
• Loading docks
• Cafeterias
• Open offices • Parking garages • Storage rooms
• Warehouses • Workspaces
• Vending rooms
Features
• Fast, Sim­ple In­stal­la­tion: Easy base mount, three wire
connection (low voltage) and twist-and-lock detector
attachment.
• Self-Adjusting: Internal microprocessor con­tin­u­al­ly
analyzes, evaluates and adjusts the infrared sen­si­tiv­i­
ty and time delay. Per­for­mance is kept at a max­i­mum
and user com­plaints are eliminated.
• Multi-element, long range lens
• Flexible Base Mounting: Supplied twist-and-lock base
mount permits fast alignment. Supplied cover hides
mounting hardware and wires. Can be used with
raceways for hard surface installations. Adjustable
canopy for wall or ceiling mount.
• Range & Coverage: Up to 100 ft. for gross body
motion or forklift. Max. 33.2 feet wide.
• Custom off-white color matched for shaded ceiling/
corner spaces and most common ceiling tiles.
• High Motion Sensitivity: The large lens area and
multi-element lens design give excellent range and
sensitivity.
• Ambient Light Recognition: A Light Sensor prevents
lights from turning on when the room is adequately
lit by natural light.
• Non-Volatile Memory: Learned and ad­just­ed settings saved in protected memory are not lost during
power outages.
• Timer Setting Feature: Automatic – 30sec – 30min.
Test mode – 6sec with auto exit programming.
• Walk-Through: Provides increased energy savings by
decreasing the time delay to 2.5min when someone
momentarily walks through the monitored space.
• Uses OSPxx Series Power Pack: Uses Class 2, 24 volt
wiring, three wire connection (low voltage). Multiple
sensors can control single or multiple power packs.
• Power base (OPB 15) available for line voltage applications
• Device: High-impact housing and in­jec­tion molded
plastic. Color coded wire leads are 6” long (16.24 cm).
• Infrared Sensing: High sensitivity 9.8 micron detector
dual element.
How The OSWLR-I Automatically Adapts
Condition
Timer Left In Test Mode - The
sensor remains in an 6 sec.
test mode.
Example
An installer accidentally leaves
the sensor in the 6 sec. timer
test mode and the lights may go
off or on every 6 sec.
Self-Adaptive Reaction
The sensor automatically resets the timer
to 10 min after
.
15 min of test mode.
False-On - The sensor
incorrectly turns the lights on.
The sensor detects movement
in the corridor or hall way and
the room lights turn on.
After an initial movement is sensed,
if another mov ement is not sensed within
the timer setting then the delayed off time
setting is automatically reduced.
False-Off - The sensor
incorrectly turns the lights off.
The sensor does not detect
movement because an
occupant sits virtually
motionless at a desk and the
lights turn off.
If motion is sensed within a short period after
the lights go off, then the current delayed
off-time setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSWLR-I0W
Passive Infrared Aisle (Long Range)
Occupancy Sensor
product data
Mounting Bracket
Adjustment Range
Dimensions
Mounting
Base
85°
4.23 inch
60°
Base Cover
6.43 inch
4.67 inch
Long
Range
Lens
Sensor
DIP switch settings
Switch
Switch Functions
Switch Settings
Bank A
OFF
ON
A1
N/A
A2
N/A
A3
Manual Mode
Auto Adapting Enabled Auto Adapting Disabled
A4
Walk-Thru Disable Walk-Thru Enabled
Walk-Thru Disabled
BANK B
B1
Override to On
Auto Mode
Lights forced On
B2
Override to Off
Auto Mode
Lights forced Off
B3
Test Mode
OFF’ON’OFF
Enter/Exit Test Mode
B4
LED Disable
LEDs Enabled
LEDs Disabled
2.80 inch
FIELD-OF-VIEW
Field of View (in feet)
TOP VIEW
16.6
*Bold items are factory defaults
0
SPECIFICATIONS
ELECTRICAL
16.6
Power Requirements
24 VDC, 15mA (.36W) from OSPxx Power Pack or
OPB15 Power Base
Power Consumption
15mA Stand-by
Output
24 VDC active high logic control signal with short
circuit protection
OSWLR-I0W
CONTROLS
Infrared Sensitivity
0 to 100%: red knob (factory setting: 75%)
Light Sensor
Blue knob 20 to 3,000 Lux. Factory set at 100%
(Grey wire required)
Time Delay
30sec-30min; black knob (Factory setting: 10min)
SIDE VIEW
10
Major Motion, PIR
0
0
14
42
71
100
OSWLR-I0W
Physical Wiring
INDICATORS
Red LED
NC-Brown
Common-Green
NO-Brown/White
Infrared motion technology
ENVIRONMENTAL
Operating
Temperature Range
32°F to 104°F (o°C to 40°C)
Relative Humidity
0% to 95% non-condensing, for indoor use only
Listings
Warranty
Black
Sensor
Blue
(Control)
Black
Red
OTHER
Mounting Height
To HVAC
System
Red (24VDC)
OSPxx Series
Power Pack
Black
Blue*
(occupancy)
8-10 feet
CUL/US Certified, meets ASHRAE Standard 90.1 and
CEC Title 24 requirements
Limited Five-Year Warranty
Gray*
Blue
Hot (Black)
(photocell +
occupancy)
Blue
Red
Black
Line
120-277-347VAC
60Hz
Black
White
DESCRIPTION
OSWLR-I0W
Passive Infrared Aisle (Long Range) Occupancy
Sensor
Blue*
(occupancy)
Gray*
(photocell +
occupancy)
ORDERING INFORMATION
CAT NO.
Load
Neutral (White)
NAFTA compliant and Made in USA models available
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7733A/G10-cb
White
product data
OSP/OSA Power Pack Series
Containing both a 24VDC supply and a 20A line
voltage relay for most models, the Leviton compact Power Pack provides low voltage power
and line voltage control for Leviton Occupancy
Sensors. Versions include Auto-ON and ManualON inputs for occupancy sensors, Hold-ON
and Hold-OFF capabilities, and a local input for
momentary or maintained dry contact switches.
The internal relay can control up to 20A for 120,
230, 277VAC or 347VAC ballast loads and 120VAC
incandescent loads. The OSP Power Pack Series
is also used to supply power to the OSA AddA-Relay model. The Power Pack conveniently
mounts in a knockout hole of a standard junction
box. The unit can be placed inside or outside the
junction box with a simple twist-on nut.
• OSP20-RD
- Interface to BAS/BMS and HVAC
• OSP20-RDH
- Bi-Level or A/B lighting
- Shared emergency lighting
- Inexpensive 3-Way switching
• OSA20
- Expanding circuit switching capacity
- Cost conscious mixed voltage solutions
Easy Mounting
APPLICATIONS
Use a Leviton Power Pack with Leviton
Occupancy Sensors in the following applications.
• Classrooms
• Conference rooms
• Anywhere optimal lighting and energy savings
are desired
• Load shed/Interface hold-OFF applications
• Retail hold-ON/bypass applications
• OSP20
- Multi-circuit switching
- Ceiling access lighting and energy
management controls
Twist-On Nut
Junction Box
Ballast Cavity of Light Fixture
Ballast
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSP/OSA Power Pack Series
Provides low voltage power and line voltage
control for Leviton Occupancy Sensors
product data
FEATURES
OSP20-0D0/OSP20-ND0
• Self-contained transformer and relay
• Internal voltage regulator – regulated 24VDC current,
150mA output
• Fast installation - mounts inside or outside junction
box, or inside fluorescent ballast cavity with a simple
twist-on nut
• Single or multiple luminaire control
• Zero crossing circuitry
• UL 2043 Plenum Rated
• Companion Add-A-Relay provides additional capacity
(OSA20-R00)
• NAFTA compliant (OSP20-ND0)
• Made in USA compliant (OSP20-DA0)
dimensions
3.13”
(79.5mm)
OSP/OSA Power Pack Series
OSP20-RD0/OSP15-R30/OSP20-NH0
Includes the same features as the OSP20-0D0, plus:
• Dry contact relay for combined sensor control of
lighting and heating/air conditioning
• Dry contact for designing controlled closure
• Form A relay for interface to Building Automation/
Management Systems (BAS/BMS)
• NAFTA compliant (OSP20-NH0)
• Made in USA compliant (OSP20-RAD)
OSP20-RDH/OSP20-RNH
Includes the same features as the OSP20-RD0, plus:
• Auto-ON and Manual-ON inputs for occupancy sensors
• “Hold-ON” input – when activated, unit is always ON
regardless of any other input
• “Hold-OFF” input – when activated, unit is always OFF
regardless of any other input
• Local inputs for momentary or maintained dry contact
low voltage switching
• Robust mechnical batching relay designed to perform
as a Form C normally closed device
• Increased power supply output to 255mA
• Upon loss of power, latching relay maintains current
state (closed or open)
- H.I.S. >(High In-rush Stability)
- Heavy duty zero crossing circuitry
• Robust mechanical latching relay
• NAFTA compliant (OSP20-RNH)
• Made in USA compliant (OSP20-RAH)
OSA20-R00/OSA20-RNO
• 15A relay can be added to any OSP20 power pack
for flexible design
• For design flexibility when cost conscious
• Inexpensive solution for mixed voltage lighting design
• Used for expanding circuit switching capacity
• Use OSP20 power packs for Emergency Lighting
circuits and OSA20 Add-A-Relays for inexpensive
control of normal lighting
• NAFTA compliant (OSA20-RN0)
• Made in USA compliant (OSP20-RA0)
3.81”
(96.8mm)
2.40”
(61mm)
1.43”
(36.3mm)
OSPxx Series Power Pack
Sensor
NC-Brown
Common-Green
NO-Brown/White
Red (24VDC)
To HVAC
System
Black
Blue
(Control)
Black
Red
Black
Blue*
(occupancy)
Gray*
Blue
Hot (Black)
Blue
Red
Black
Line
120-277-347VAC
50/60Hz
Load
(photocell +
occupancy)
Black
White
White
Blue*
(occupancy)
Gray*
(photocell +
occupancy)
Neutral (White)
NC-Brown
Common-Green
NO-Brown/White
To HVAC
System
OSA20
Add-A-Relay
Hot (Black)
Line
120-277-347VAC
60Hz
Neutral (White)
Blue
Blue
Black
Load
White
OSP20-RxH Bi-Level Switching
OSP20-RxH Bi- Level Switching
N
Yellow
Zone 1 – Auto ON
H
Orange
Orange/Yellow
Black
Blue
White
White/Blue
Blue
Green
Blue
Brown/White
Brown
Occupancy
Sensor
Local SW 1
Auto ON
+24VDC
Red
Com
Black
LOAD 1
LOAD 2
Yellow
Zone 2 – Manual ON
Orange
Orange/Yellow
Black
Blue
White
White/Blue
Local SW 2
Momentary or
Maintained Switches
Manual ON
Blue
Green
Blue
Brown/White
Brown
Red
Black
Com
SIGNAL TYPE
Line Voltage Wires
Line 120-230-277VAC
(OSP20-Rx0)
Neutral
Load
Load
Class 2 Wires
Power (24VDC)
DC Return
Occupancy Auto-ON
Occupancy Manual-ON
Hold-ON
Hold-OFF
Local Switch Input
SIGNAL TYPE
COLOR
GAUGE
Black
18AWG
White
Blue
Blue
18AWG
14AWG
14AWG
Red
Black
Blue
Blue/White
Yellow
Orange
Yellow/Orange
COLOR
22AWG
22AWG
22AWG
22AWG
22AWG
22AWG
22AWG
GAUGE
HVAC Wires
Dry Contact Common
Dry Contact NO
(Normally Open)
Dry Contact NC
(Normally Closed)
Green
Brown/White
22AWG
22AWG
Brown
22AWG
• All wires rated at 105ºC, 600V insulation.
• Class 2 wires are Teflon jacketed, for plenum applications.
• Dry Contact wiring is Class 1 and Class 2 rated.
Power Pack Capacity Formula
Leviton power packs can be used to provide power to one or more occupancy sensors. Since current consumptions of
occupancy sensors may vary, the best way to ensure you order the correct number of power packs and add-a-relays is
by using this formula:
# of sensor
Model As
X
+
Sensor A current
consumption rating
# of sensor
Model Bs
X
+
Sensor B current
consumption rating
# of Add a
Relays
X
50mA
< 150mA per power pack
DESCRIPTION
OSC04-I, OSC15-I, OSWHB-I, OSWLR-I, OSWWV-I
current consumption
OSC05-M, OSC05-U, OSW12-M
30mA
OSC10-M, OSC10-U
40mA
OSC20-M, OSC20-U
32mA
OSA20-R00 Add a Relay
50mA
20mA
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSP/OSA Power Pack Series
WIRING Designations
product data
SPECIFICATIONS
ELECTRICAL
Line Voltage
120-230-277 VAC
Relay Rating
HVAC Relay: 0.5A @ 120VAC, 1.0A @ 30VDC
ENVIRONMENTAL
Operating Temperature Range
32°F to 104°F (o°C to 40°C)
Relative Humidity
0% to 90% non-condensing, for indoor use only
OTHER
Construction
Case: high impact, UL rated plastic
Relay: class B (130°C) insulating material; silver alloy contacts
Wire: 6” leads, 18AWG input; LV connections: 7” leads 22AWG
Dimensions
2.400”H x 3.811”W x 1.432”D (60.96mm x 96.80mm x 36.37mm)
Listings
UL/CUL Listed, FCC Certified, NOM Certified, and meets ASHRAE 90.1 requirements
Color
Black
Warranty
Limited Five-Year Warranty
OSP/OSA Power Pack Series
ORDERING INFORMATION
Description
Cat. No.
Power Input
Relay Rating
Control
Input
Power Supply
Output
Power Pack
OSP20-0D0
120-230-277VAC,
50/60 Hz
20A fluorescent/incandescent @
120V, 20A fluorescent @ 230-277V;
1HP @ 120V, 2HP @ 240V
5mA, 24VDC
150mA, 24VDC
Power Pack with
Dry Contact Relay
OSP20-RD0
120-230-277VAC,
50/60 Hz
20A fluorescent/incandescent @
120V, 20A fluorescent @ 277V; 1HP
@ 120V, 2HP @ 240V; HVAC: 0.5A @
120VAC, 1A @ 30VDC
5mA, 24VDC
150mA, 24VDC
Power Pack with
Dry Contact Relay
OSP15-R30
347VAC, 60 Hz
15A fluorescent @ 347V; 1HP @ 120V,
2HP @ 240V; HVAC: 0.5A @ 120VAC,
1A @ 30VDC
5mA, 24VDC
120mA, 24VDC
Add-A-Relay Unit
with Dry Contact
Relay
OSA20-R00
15A incandescent @ 120V, 20A fluorescent @ 120V, 20A fluorescent @
277V, 15A fluorescent @ 347V; HVAC:
0.5A @ 120VAC, 1A @ 30VDC
5mA, 24VDC
20A fluorescent/incandescent @
120V; 20A fluorescent@ 277V; 1HP
@ 120V, 2HP @ 240V; HVAC; .05A @
120VAC, 1A @ 20VDC and 15A fluorescent @ 347V; 1HP @ 120V; 2HP @
240; HVAC: 0.5A @ 120V, 1A @ 30VDC
5mA, 24VDC
Power Pack with
Dry Contact Relay
and Override Inputs
for Occupancy
Sensors
OSP20-RDH
—
120-230-277VAC,
50/60Hz
—
225mA, 24VDC
* Consult factory for 208, 220, and 240V models.
leviton specification submittal
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8226B/A11-ak
PRODUCT data
Power Base Adaptor
Problem:
Hard ceilings with limited access for
low-voltage wiring installations
Solution:
Leviton’s Power Base Adaptor
Description
Leviton’s OPB15-0DW is a self-contained transformer and relay adaptor with a patent-pending
technology that converts any Leviton low-voltage
ceiling or wall sensor to line voltage. The OPB150DW conveniently mounts to a standard 2.125”
deep x 4” octagon, 2.125” deep x 4” square electrical box with mud ring, or to 4” surface mount
wire raceway boxes. It provides wire leads for
simple connection to a line-voltage circuit and a
two-part terminal block for fast, easy low-voltage connections to the sensor. The Power Base
Adaptor is ideal for both existing buildings with
limited access to wiring and new construction
with line-voltage circuiting only.
The OPB15-0DW offers the same performance
features as Leviton’s OSP Power Pack Series. By
providing the flexibility to install Leviton’s full line
of low-voltage sensors in any application, the
Power Base Adaptor is a “problem solver” that
increases the versatility of Leviton’s low-voltage
ceiling occupancy sensors.
Applications
• Lavatories
• Remodels in hard ceiling spaces
• Energy conservation retrofits
• Any installation with limited access for
low-voltage wiring installation
• Surface mount boxes
Features & Benefits
• Ability to convert Leviton low-voltage ceiling
sensors to line-voltage offers greater versatility in any application
• Streamlined installation offers customers an
immediate energy-management solution
• Mounts easily in electrical box and provides
leads for simple line voltage connection
• Two-piece terminal block provides fast, easy
low-voltage connections to the sensor
• Zero-crossing circuitry for enhanced reliability
and long-life operation
• Patented
Use the OPBCA Cosmetic Adaptor for surface
mount wire raceway boxes or to cover any wallboard cuts for a professional finish to all projects.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OPB15 Power Base Adaptor
Convert any Leviton low-voltage sensor to line voltage.
product BULLETIN
OPB15 Power Base Adaptor
Specifications
Electrical
Input Voltage
Output Voltage
120-277 VAC @ 50/60Hz
24 VDC, 40mA nominal, full-wave rectified and filtered, unregulated.(Each
Leviton sensor contains an internal
voltage regulator.)
Load Rating
15A Incandescent, Electronic or
Magnetic Fluorescent Ballast;
3/4 HP at 120V
Wire Designation
Line-Black, Load-Blue, White-Neutral
Power Consumption Lights On: 120V - 1.58W, 277V - 2.34W
(base only)
Lights Off: 120V - .27W, 277V - 1.04W
Environmental
Operating
0°C to 40°C (32°F to 104°F)
Temperature Range
Storage
-10°C to 85°C (14°F to 185°F)
Temperature Range
Relative Humidity
0% to 90% non-condensing
Physical
Case
High impact plastic
Relay
Class B (130°C) insulating material.
Silver alloy contacts switching power
supply — 120/230/277 VAC
Wire
6” leads 14 AWG input, two-part
terminal block output
Size
4.5” dia. x 1.75” deep
Color
White
Agency Standards and Compliance
OPB15-0DW
UL and cUL Listed
NOM
CEC Title 24
Backed by Limited Five-Year Warranty
Ordering Information
Cat. No.
Description
OPB15-0DW
Occupancy Sensor Power
Base Adaptor
OPBCA-00W
Power Base Cosmetic
Adaptor Plate
Installation and Wiring
Connect and mount the OPB15 to the electrical
box. Using the terminal block, connect the low
voltage sensor. Match the arrows on the sensor
to the base and twist to lock. Test the sensor for
correct operation.
Wiring diagram
Color
White
White
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Tualatin, OR 97062
Telephone: 1-800-736-6682 • FAX: 503-404-5594 • Tech Line (6:00AM-4:00PM P.S.T. Monday-Friday): 1-800-959-6004
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8533/A11-cb
56081-2I
Leviton Catalog #:
56081-2I
Description: 3 Amp, 24 Volt, Decora Plus Rocker Double-Throw Ctr-OFF Momentary Contact Single-Pole
AC Quiet Switch, Commercial Grade, Self Grounding, Back & Side Wired, - Ivory
Product Features:
Ground:
Feature:
Amperage:
Voltage:
Termination:
Actuator Material:
Body Material:
Strap Material:
Color:
Warranty:
Self Grounding
Double-Throw Ctr-OFF Momentary Contact
3 Amp
24 Volt
Back & Side
Thermoplastic
Thermoplastic
Steel
Ivory
10 Year Limited
For answers to technical questions call our Techline at 1-800-824-3005 (8:30AM-6:00PM EST M-F).
For Other products go to www.leviton.com and select Leviton EZ-Find.
Leviton Manufacturing Co., Inc.
59-25 Little Neck Parkway, Little Neck, NY 11362-2591
Telephone: 1-800-323-8920 FAX: 1/800-832-9538
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9
Outside Canada: 1-514-954-1840 FAX: 1-514-954-1853/1854
Inside Canada: 1-800-469-7890 Techline: 1-800-405-5320 FAX 1-800-563-1853
56081-2W
Leviton Catalog #:
56081-2W
Description: 3 Amp, 24 Volt, Decora Plus Rocker Double-Throw Ctr-OFF Momentary Contact Single-Pole
AC Quiet Switch, Commercial Grade, Self Grounding, Back & Side Wired, - White
Product Features:
Ground:
Feature:
Amperage:
Voltage:
Termination:
Actuator Material:
Body Material:
Strap Material:
Color:
Warranty:
Self Grounding
Double-Throw Ctr-OFF Momentary Contact
3 Amp
24 Volt
Back & Side
Thermoplastic
Thermoplastic
Steel
White
10 Year Limited
For answers to technical questions call our Techline at 1-800-824-3005 (8:30AM-6:00PM EST M-F).
For Other products go to www.leviton.com and select Leviton EZ-Find.
Leviton Manufacturing Co., Inc.
59-25 Little Neck Parkway, Little Neck, NY 11362-2591
Telephone: 1-800-323-8920 FAX: 1/800-832-9538
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9
Outside Canada: 1-514-954-1840 FAX: 1-514-954-1853/1854
Inside Canada: 1-800-469-7890 Techline: 1-800-405-5320 FAX 1-800-563-1853
PRODUCT DATA
Decora® Wall Switch PIR
Occupancy Sensor
BASIC OPERATION
The ODS10-ID uses passive infrared (PIR)
detection technology to monitor a room for
occupancy through a segmented Fresnel lens.
This specialized lens divides the field-of-view
into sensor zones. When a person passes into
or out of a sensor zone, the sensor detects
motion and switches the lights ON. The lights
will remain ON as long as there is an occupant
moving through the sensor zones.
OPTIMAL
LED
READY™
LED
DESIGN
Exclusive LED High Inrush
Stability (H.I.S.) circuitry
designed to handle the high
inrush electronic ballast loads
of today’s LED lighting and
offer unmatched durability
and service. Our true ZeroCross Relay switches are at
the zero crossing point of
the AC power curve, ensuring
maximum
contactor
life
and compatibility with LED
ballasts. Leviton Occupancy
and Vacancy Sensors are
the premiere choice for LED
compatibility.
APPLICATIONS
Leviton’s Cat. No. ODS10-ID Decora® Wall
Switch Passive Infrared (PIR) Occupancy
Sensor is used to provide automatic lighting
control for energy savings and convenience in
a variety of commercial applications including:
• Small offices
• Conference rooms
• Lounges
• Classrooms
The ODS10-ID can be used for automatic
switching of incandescent lamps and fluorescent and low-voltage lighting with electronic
or magnetic ballasts. The unit also features
a manual override switch that can be used
to keep lights OFF while an area is occupied,
which may be desired in conference rooms and
other areas during slide or film presentations.
The unit installs in place of a single-pole wall
switch and fits in a standard wall box. The unit
requires a ground connection.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
ODS10
ODS10-ID
ODS10
PRODUCT DATA
FEATURES
•Fits in standard wallbox and replaces single-pole
wall switch. Gangable with other units.
•Low-profile design eliminates obtrusive “scanning-device” look. Elegant Decora wallplates
complement any interior for sleek aesthetics;
uses Decora wallplates and coordinates with
Leviton’s popular line of Decora wiring devices.
•180° field-of-view provides approximately 2100
square feet of coverage suitable for small offices, conference rooms, classrooms, lounges and a
variety of commercial areas.
•Convenient pushbutton provides manual-ON/OFF
light switching at any time.
• Two dual element PIR sensors used to widen
detection range.
•Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body
movements will be detected.
•Vandal resistant PIR lens.
•Patented Blinders - horizontal field-of-view may
be adjusted between 180° and 60° of arc by
using integral blinders located on either side of
the lens. No masking tape required.
• Manual-ON/auto-OFF mode for installations where
manual-ON switching is required but auto-OFF
switching is still desired for CA Title 20/24 energy
savings.
•To comply with CA Title 20, red LED indicator
light flashes wh en sensor detects motion to
verify detection is active.
•Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes,
20 minutes, and 30 minutes. Allows customized
adjustments to maximize energy savings.
•Light Sensor Adjustable Ambient Light Override
ranges from approximately 2 foot-candles (20
lux) to 500+ foot-candles (5000+ lux) to prevent
lights from turning ON automatically during periods of ample natural light, increasing energy savings.
•Light sensor enables the load hold-OFF feature
once level has been set.
•Vacancy confirmation - when the time out expires
and the lights turn OFF a 30 second vacancy confirmation exists to turn the lights back ON.
•False detection circuitry.
•Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF
and keep them OFF while the room is occupied.
•One unit can be used for 120V through 277V
lighting. Compatible with both electronic and
magnetic ballasts.
•Relay switches at the zero crossing point of the
AC power curve to ensure maximum contact life
and compatibility with electronic ballasts.
•Exclusive Leviton H.I.S. Circuitry. Specifically
designed to handle today’s high inrush electronic
ballast loads and offer unmatched durability and
service.
• No neutral design is optional for retrofit applications.
FIELD-OF-VIEW
The ODS10-ID provides a 180° field-of-view with a
maximum coverage area of approximately 2100
square feet. The maximum sensing distance in
front of the sensor is 40 feet, and at each side is
30 feet. A “minor motion” zone detects relatively
small body movements and allows the lights to
stay ON even though a person may not be moving or walking around the room. The remainder of
the field-of-view, the “major motion” zone, exhibits
a lesser degree of sensitivity and requires larger
movements.
40
TOP VIEW
30
15
0
15
30
Major Motion, IR
Minor Motion, IR
40
SIDE VIEW
5
4
0
0
ODSXX-ID
15
ODS10-ID
Field-of-View (in feet)
40
DIMENSIONAL DIAGRAMS
1.75”
(44.4mm)
Mounting Yoke
0.48”
(12.6mm)
1.30”
(33.0mm)
Vandal Resistant
PIR Lens
1.35”
(34.4mm)
Patented
Blinders
Control Panel,
Cover Removed
BLINDERS
2
4
TIME
2.60”
(66.2mm)
7
LED Window and
Light Sensor
10
3
4.06”
(103.2mm)
2.61”
(66.3mm)
1
RANGE
Push Button
WIRING DIAGRAM
ODS10/15
ODS10/15
Blue
Blue
Blue
Black
Black
Black
Black
Line
120-230-277VAC,
50/60Hz
Load
White
Neutral (White)
Note: Ground must be connected
Load
Green
Ground
Green
Ground
Neutral (White)
Note: Ground must be connected
ODS10/15 Wall Switch Occupancy Sensor Wiring Diagram,
Single Location Control
ODS10/15 Wall Switch Occupancy Sensor Wiring Diagram,
Multi-Location Control
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
White
Green
Ground
Line
120-230-277VAC,
60Hz
ODS10
Hot (Black)
Black
Hot (Black)
PRODUCT DATA
INSTALLATION
The ODS10-ID may replace a single-pole wall switch
mounted in a standard wallbox. The unit must be
properly grounded in order to operate. The unit’s
integral blinders may be used to restrict the fieldof-view to prevent unwanted detection of hallway
traffic. It should be positioned at least 6 feet away
from HVAC registers. Note that whenever the unit
is powered up, it will take approximately one minute to begin normal operation.
ELECTRICAL
Line Voltage
Power
Consumption
Operational
Frequency
Wire
Designation
Load Rating
120-230-277 VAC
120V - 100mW
277V - 250mW
50/60Hz
Line - Black, Load - Blue, Ground - Green
No neutral required
Fluorescent: 1200VA @ 120V, 2700VA @
277V
Incandescent: 800W @ 120V
Motor: 1/4 HP @ 120V
ENVIRONMENTAL
ODS10
Operating
Temperature
Range
Storage
Temperature
Range
Relative
Humidity
32°F to 122°F (0°C to 50°C)
14°F to 185°F (-10°C to 85°C)
20% to 90% non-condensing
OTHER
Listings
Warranty
UL Listed/CSA Certified, CA Title 20/24,
Compliant, Complies with FCC Regulations,
NOM Certified
Limited Five-Year Warranty
ORDERING INFORMATION
CAT. NO.*
DESCRIPTION
ODS10-ID
Decora Wall Switch Occupancy Sensor
To indicate color, add suffix to the end of the catalog number.
White (-W) , Ivory (-I), Light Almond (-T), Gray (-G), Ebony (-E), and Red (-R).
*NAFTA compliant and Made in USA models available.
Leviton Manufacturing Co., Inc. Global Headquarters
201 N. Service Rd. Melville, NY 11747-3138 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Tualatin, OR 97062 • Tel: 1-800-736-6682 • FAX: 503-404-5594 • Tech Line (6:00AM-4:00PM P.S.T. Mon-Fri):
1-800-959-6004
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8333B/C14-aa
REV MAR 2014
PRODUCT DATA
ODS0D-ID-TD
BASIC OPERATION
The ODS0D uses passive infrared (PIR) technology to
monitor a room for occupancy through a segmented
Fresnel lens. This specialized lens divides the field-ofview into sensor zones. When a person passes into or
out of a sensor zone, the sensor detects motion and
switches two separate lighting loads ON. The lights
will remain ON as long as there is an occupant moving
through the sensor zones.
The ODS0D-TD has an adjustable 30 minute time delay
setting for the first and second relay to comply with
CEC Title 24. The second relay is manual-ON only.
APPLICATIONS
Leviton’s ODS0D Dual-Relay Decora Wall Switch
Passive Infrared (PIR) Occupancy Sensor is used to
provide automatic lighting control for energy savings
and convenience in a variety of commercial applications, including:
• Classrooms
• Conference rooms • Offices
• Multimedia rooms • Day care centers • Lounges
• Daylight harvesting • Bi-level or A/B switching
The ODS0D provides automatic switching of two separate lighting loads from a single unit. It is compatible
with incandescent, fluorescent and low-voltage lighting. The unit features dual manual-override switches
that can be used to toggle the ON/OFF status of each
lighting load while an area is occupied. The ODS0D can
be installed in place of two single-pole wall switches
and fits in a standard single-gang wall box. The unit
requires a ground connection for proper operation.
FEATURES
•Provides automatic switching for two separate banks
of fluorescent, incandescent, or low-voltage lighting
from a single unit.
•Convenient dual pushbuttons provide manual-ON/
OFF light switching of each load at any time.
•ODSOD-ID Conference Room Mode—primary and secondary relays switch lighting to last ON/OFF status
when personnel enter room, providing a consistent
lighting level from one occupancy period to the next.
Both relays respond to Ambient Light Override, preventing lights from turning ON automatically during
periods of ample natural light, for increased energy
savings.
•ODS0D-ID Classroom Mode—both primary and secondary relays always switch lighting ON when personnel enter room, regardless of their ON/OFF status
during last period of occupancy. Secondary relay only
responds to Ambient Light Override—primary does
not, ensuring that students and personnel never
enter a darkened room.
•Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep
them OFF while the room is occupied.
•Auto adapting delayed-OFF time interval compensates for real-time occupancy patterns, preventing
unnecessary ON/OFF switching.
•Exclusive Walk-Through feature provides increased
energy savings by not leaving the lights ON for an
extended period after only momentary occupancy.
•Non-Adaptive Mode disables Self-Adjusting DelayedOFF Time and Walk-Through feature in applications
where these features are not desired.
•Daylight harvesting light sensor measures the ambient light in the room when it first detects motion. It
leaves the lights OFF if there is enough light in the
room or turns the lights connected to the first relay
ON if there is not enough light in the room.
•Low-profile design eliminates obtrusive “scanningdevice” look. Elegant Decora wallplates complement
any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of
Decora wiring devices.
•180° field-of-view provides approximately 2100
square feet of coverage, suitable for a variety of
commercial areas.
•Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive
“minor motion” area where even slight body movements will be detected.
•Patented blinders: horizontal field-of-view may be
adjusted between 180° and 60° arc by using integral
blinders located on either side of the lens. No mask-
continued …
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
1
ODS0D
Dual-Relay Decora® Wall Switch
PIR Occupancy Sensor
PRODUCT DATA
ing tape required.
•Time delay adjustment for delayed-OFF time settings of
30 seconds, 5, 10, and 30 minutes. Allows customized
adjustments to maximize energy savings.
•Vandal resistant PIR lens.
•False detection circuitry.
•Light Sensor adjustable Ambient Light Override ranges
from approximately 2FC (20 LUX) to 500+FC (5000+ LUX).
•Manual-ON/auto-OFF mode for installations where manualON switching is required but auto-OFF switching is still
desired for CEC Title T24 energy savings.
•To comply with CEC Title 24, red LED indicator light flashes
when PIR sensor detects motion to verify detection is
active.
•Beep warn - unit beeps 3 times after delayed-OFF time
expires, then waits 10 seconds before turning lights OFF.
•One unit can be used for 120V through 277V lighting.
Compatible with both electronic and magnetic ballasts.
•Primary relay switches at the zero crossing point of the
AC power curve to ensure longer contact life and compatibility with electronic ballasts.
•Unit fits in standard single-gang wallbox and replaces two
single-pole wall switches; ground connection required.
Gangable with other devices.
•Exclusive Leviton H.I.S. Circuitry. Specifically designed to
handle today’s high inrush electronic ballast loads and
offer unmatched durability and service.
ODS0D
OPERATION IN CONFERENCE ROOM MODE (ODS0D-ID)
Lighting status Ambient Light Room vacant, delayed-OFF during occupancy
Override
time expires.
Lighting status when personnel re-enter darkened room
Room vacant, delayed-OFF
time expires.
Lighting status when personnel
re-enter room with ample
natural lighting
1
Primary: ON Not Set
Secondary: ON
Primary: ON Secondary: ON
Primary: ON
Secondary: ON
2
Primary: ON Set
Secondary: ON
Primary: ON Secondary: ON
Primary and Secondary remain OFF
due to light override
3
Primary: ON Not Set
Secondary: OFF
Primary: ON Secondary: OFF
Primary: ON
Secondary: OFF
4
Primary: ON Set
Secondary: OFF
Primary: ON Secondary: OFF
Primary and Secondary remain OFF
due to light override
5
Primary: OFF Not Set
Secondary: ON
Primary: OFF Secondary: ON
Primary: OFF
Secondary: ON
6
Primary: OFF Set
Secondary: ON
Primary: OFF Secondary: ON
Primary and Secondary remain OFF
due to light override
7
Both Primary and Not Set
Secondary turned OFF for viewing
mode
Primary: ON Secondary: OFF
Primary: ON
Secondary: OFF
8
Both Primary and Set
Secondary turned OFF for viewing mode
Primary: ON Secondary: OFF
Primary and Secondary remain OFF
due to light override
OPERATION IN CLASSROOM MODE (ODS0D-ID)
Lighting status Ambient Light Room vacant, delayed-OFF during occupancy.
Override
time expires.
NOTE: Previous
Lighting status when personnel status does not
re-enter darkened room
in Class Room Mode
1
Not applicable
Not Set
Primary: ON Secondary: ON
2*
Not applicable
Set
Primary: ON Secondary: ON
*Example Number 2, with the Ambient Light Override set, is more typical of the Classroom Mode.
Room vacant, delayed-OFF
time expires.
Lighting status when personnel
re-enter room with ample
natural lighting
Primary: ON
Secondary: ON
Primary: ON
Secondary: OFF (Secondary responds
to light override
FIELD-OF-VIEW
The ODS0D provides a 180° field-of-view with a maximum coverage area of approximately 2100 square
feet. The maximum sensing distance in front of the
sensor is 40 feet, and at each side is 30 feet. The
“minor motion” zone detects relatively small body
movements and allows the lights to stay ON even
though a person may not be moving or walking around
the room. The remainder of the field-of-view, the
“major motion” zone, exhibits a lesser degree of sensitivity and requires larger movements.
INSTALLATION
The ODS0D is designed to control two separate lighting loads for bi-level or A/B switching (inner and outer
banks of fluorescent lighting or separate banks of
incandescent lighting) in the area it is monitoring. The
light sensor Ambient Light Override is an important
energy-saving, daylight harvesting feature that also
distinguishes the functioning of the Conference Room
and Classroom modes (see “Operation Modes”). The
Ambient Light Override should always be adjusted
during the time of day when the ambient light is at a
level where no additional lighting is required. Exclusive
auto-adapting operating features will automatically
compensate for real-time occupancy patterns to provide maximum convenience and energy savings.
40
TO P VIEW
30
TO P VIEW
30
The ODS0D mounts in a standard single-gang wallbox
and will replace two single-pole wall switches that
control two separate lighting loads. The unit must
be properly grounded in order to operate. The unit’s
patented integral blinders may be used to restrict the
field of view to prevent unwanted detection of hallway
traffic. No masking tape required.
15
15
0
0
15
15
30
40
5
4
0
30
M inor M otion,IR
M inor M otion,IR
SID E VIEW
SID E VIEW
5
4
0
0
0 15
15
O D SXX-ID
O D SXX-ID
40
40
ODS0D-ID/-TD
Field-of-View (in feet)
O D S0D
WIRING DIAGRAMS
H ot(B lack)
Phase 1
Line
120-230-277VAC ,
60H z
B lack
Line
120-230-277VAC ,
60H z
O D S0D
R ed
H otO(BDlack)
S0D
Phase 1
R ed
N eutral(W hite)
The ODS0D should be positioned at least 6 feet away
from HVAC registers. The switch located under the
push-button provides three operational settings: “ON”
turns the lighting load ON indefinitely (motion detection not active), “OFF” disconnects the lighting load
from the power for relamping purposes, and “AUTO”
activates automatic motion detection. Note that
whenever the unit is powered up, it will take approximately 1 minute to begin normal operation.
M ajor M otion,IR
M ajor M otion,IR
40
B lack
R ed
B lue
G reen
G round
N eutral(W hite)
Prim ary
Load
Hot (Black)
Phase 1
Prim ary
Load
Secondary
Load
N ote:G round m ustbe connected
ODS0D-ID
Wiring
Diagram
for Single
Pole Application—Single Phase
N ote:G round
m ust
be connect
ed
R ed
H ot(B
lack)
ODS0D
Phase 1
Red (To Phase 2)
R ed
B lue
G reen
G round
ODS0D
40
Secondary
Load
R ed
B lack
Red
Black
Line
120-230-277VAC ,
60H z
Line
120-230-277VAC,
50/60Hz
Neutral (White)
B lue
Blue
Green
Ground
N eutral(W hite)
G reen
G roundPrimary
Load
Prim ary
Load
Secondary
Load
N ote:G round m ustbe connected
ODS0D-ID Wiring Diagram for Single Pole Application—2 Phase
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
3
Secondar
Load
PRODUCT DATA
SPECIFICATIONS
DIMENSIONAL DIAGRAMS
ELECTRICAL
1.75
(44.4 mm)
Line Voltage
120-230-277 VAC
Power
Consumption
120V - 110mW
277V - 270mW
Operational
Frequency
50/60Hz
Wire
Designation
Primary Relay—
No. 16 AWG leads:
Line—Black
Load—Blue
Ground—Green
Secondary Relay—
N0. 18 AWG isolated
contact leads: (2)
Red
Load Rating
Primary Relay—
Fluorescent:
1200VA @ 120V
2700VA @ 277V
Incandescent:
800W @ 120V
Secondary Relay—
Fluorescent:
800VA @ 120V
1200VA @ 277V
Incandescent:
800W @ 120V
0.48 (12.6 mm)
1.30
(33.0 mm)
OFF
AUTO
2.60 (66.2 mm)
4.06 (103.2 mm)
2.61 (66.3 mm)
1.35
(34.4 mm)
ON
BOTTOM
ENVIRONMENTAL
Operating Temperature Range
32°F to 122°F (0°C to 50°C)
Storage Temperature Range
-50°F to 185°F (-10°C to 85°C)
Relative Humidity
20% to 90% non-condensing
Mounting Yoke
Vandal Resistant
PIR Lens
OTHER
Listings
CUL/US Certified, CEC Title 24 Compliant
FCC Compliant
Warranty
Limited Five-Year Warranty
Patented Blinders
1
2
4
7
4
7
Control Panel,
Cover Removed
3
10
10
TIME RANGE LIGHT
ODS0D
ORDERING INFORMATION
CAT. NO.*
DESCRIPTION
ODS0D-ID
Dual-Relay Decora Wall Switch Occupancy Sensor
for 120/277 VAC applications
CEC Title 24 Compliant
Dual-Relay Decora Wall Switch Occupancy Sensor
for 120/277 VAC applications
ODS0D-TD
Pushbutton 2
LED Window
& Light Sensor
Pushbutton 1
OFF AUTO
ON
BOTTOM
Service Switch
* To indicate color, add suffix to the end of the catalog number.
White (-W), Ivory (-I), Light Almond (-T), Gray (-G), Ebony (-E), and Red (-R)
NAFTA and Made in USA models available.
SPECIFICATION SUBMITTAL
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8318A/K11-tb
REV NOV 2011
PRODUCT DATA
Decora® Wall Switch Multi-Technology
Occupancy Sensor
OSSMT-MD/GD
The PIR sensors provide immunity to false ON through
a specialized Fresnel lens which divides the field-ofview into sensor zones. When a person passes into or
out of a sensor zone, the sensor detects motion and
switches the lights ON.
The Ultrasonic (U/S) sensors provide maximum sensitivity and range in difficult spaces with irregular
shaped rooms and partitions that can block the PIR
field-of-view. A pair of U/S sensors will detect Doppler
shifts caused by motion in a space preventing false
OFF. These sensors are more sensitive to small movements since they do not rely on zones.
SELF-ADAPTIVE TECHNOLOGY
Designed for “install and forget” use, the OSSMT
automatically analyzes room conditions and adapts to
errors or changing environment.
HOW THE OSSMT-MD AUTOMATICALLY ADAPTS
CONDITION
EXAMPLE
ADAPTIVE REACTION
False-ON:
Sensor
incorrectly
turns the
lights ON.
The sensor detects
movement in the
corridor or hallway
and the room light
turns ON.
After an initial movement
is sensed, if another
movement is not sensed
within the timer setting the
delayed off-time setting is
automatically reduced.
False-OFF:
Sensor
incorrectly
turns the
lights OFF.
The sensor does
not detect movement because an
occupant is virtually motionless and
the lights turn OFF.
If motion is detected shortly after the lights go OFF,
the current delayed offtime setting is increased.
APPLICATIONS
Leviton’s OSSMT Multi-Technology Decora Wall Switch
Occupancy Sensor is used to provide automatic lighting control for energy savings and convenience in a
variety of commercial applications:
• Retrofit
• Private and executive offices
• Conference rooms
• Storage areas
• Restrooms
• Classrooms
• Lounges
• Training areas
• Multi-location switching (similar to 3-way)
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSSMT
BASIC OPERATION
Occupancy sensors have two tasks: keeping the lights
ON while the space is occupied and turning the lights
OFF when unoccupied.
FEATURES
• Fast, simple Installation: Fits in a standard wall box and
replaces a single-pole wall-switch; neutral and no neutral
options available. Sensor can be ganged together with
other units in a multiple-switch wall plate.
• Low-profile design eliminates obtrusive “scanning-device”
look. Elegant Decora wallplates complement any interior
for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices.
• Convenient Pushbutton provides manual-ON/OFF light
switching at any time.
• Segmented Fresnel lens provides optimum sensitivity
and performance. Designed with an extensive “minor
motion” area where even slight body movements will be
detected.
• Vandal resistant PIR lens.
• Patented Blinders: Adjustable horizontal field-of-view (PIR
may be adjusted between 180° and 60° of arc by using
integral blinders located on either side of the lens). No
masking required.
• Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still
desired for CEC Title 24 energy savings.
• To comply with CED Title 24, LED indicator light flashes
when sensor detects motion to verify detection is active.
Green flashes for ultrasonic, red flashes for PIR.
• Time: The delayed OFF time is preset at 30 minutes in
the Auto Adapting mode. A choice of four delayed-OFF
time settings are available: 30-seconds (for walking test
purposes only), 10, 20, and 30 minutes for fixed time and
auto adapting. The LED will flash when the adjusting knob
is set to the indicated time value.
• Ambient Light Recognition: Integrated light sensor prevents lights from turning on when the room is adequately
illuminated by natural light.
• Self-Adaptive Technology: Callbacks for adjustment are
eliminated. Time delay and sensitivity settings are continually adjusted to occupant patterns of use in auto
adapt mode.
• Exclusive Walk-through Feature provides increased
energy savings by not leaving the lights ON for an
extended period after only momentary occupancy.
• Vacancy Confirmation: When the time out expires and
the relays turn OFF, a 30 second (OSSMT-G) or 40 second
(OSSMT-M) vacancy confirmation exists to turn the relays
back on.
• False detection circuitry.
• Small Motion Sensitivity (U/S): Ultrasonic technology provides excellent minor motion sensitivity.
• Ability to disable U/S (OSSMT-M). For added flexbility,
OSSMT-G has the ability to disable both PIR and U/S.
• Presentation Mode feature: For slide or film presentations, allows pushbuttons to turn lights OFF and keep
them OFF while the room is occupied.
• Exclusive Leviton H.I.S. Circuitry. Specifically designed to
handle today’s high inrush electronic ballast loads and
offer unmatched durability and service.
• True Zero-Cross Relay switches at the zero crossing point
of the AC power curve to ensure maximum contactor life
and compatibility with electronic ballasts.
FIELD-OF-VIEW
The OSSMT provides a 180° field-of-view with a maximum
coverage area of approximately 2400 square feet. The
maximum sensing distance in front of the sensor is 40
feet, and side to side is 30 feet. The “minor motion” zone
detects relatively small body movements and allows the
lights to stay ON even though a person may not be moving
or walking around the room. The remainder of the field-ofview, the “major motion” zone, exhibits a lesser degree of
sensitivity and requires larger movements.
TOP VIEW
30
20
0
20
30
5
4
0
SIDE VIEW
0
20
40
Major Motion, PIR
Major Motion, U/S
Major Motion, PIR
Major Motion, U/S
Minor Motion= Dual Technology coverage. This also represents the
maximum ultrasonic range coverage.
DIMENSIONAL DIAGRAMS
1.85in
46.99mm
1.75in
44.45mm
.5in/12.62mm
1.35in
34.37mm
2.65in
67.26mm
4.06in
103.12mm
Mounting Yoke
Vandal
Resistant
PIR Lens
Patented
Masking
Blinders
2.60 (66.2 mm)
OSSMT
PRODUCT DATA
Control Panel,
Cover Removed
1
2
4
7
4
7
3
10
10
TIME RANGE LIGHT
LED &
Light Sensor
Pushbutton
BOTTOM
Ultrasonic
Sensors
INSTALLATION
The OSSMT is preset to deliver optimum performance in a wide
variety of applications without requiring any adjustments during installation. Exclusive self-adjusting operating features will
automatically compensate for real-time occupancy patterns
to provide maximum convenience and energy savings. The unit
may replace a single-pole wall switch mounted in a standard
wall box. The OSSMT-MD must have a neutral and be properly
grounded in order to operate. The OSSMT-GD does not require a
neutral for installation. The unit’s integral blinders may be used
to restrict the field of view to prevent unwanted detection of
traffic. It should be positioned at least 6 feet away from HVAC
registers. Note that whenever the unit is powered up, it will take
approximately 1 minute to begin normal operation.
WIRING DIAGRAM
Line
120-230-277/347VAC
50/60Hz
OSSMT-MD Wall Switch Occupancy Sensor Wiring Diagram,
Single Location Control
SPECIFICATIONS
ELECTRICAL
Line Voltage
120-230-277/347 VAC
PIR only
120V
277V
347V
390mW
480mW
500mW
190mW
270mW
350mW
OSSMT-GD
120V
277V
110mW
340mW
70mW
310mW
Operational Frequency
50/60Hz
Ultrasonic Operating
Frequency
40kHz
Wire Designation
Line-Black Neutral-White
Load-Blue Ground-Green
Load Rating
Incandescent/Tungsten: 800W @ 120V
Fluorescent: 1200VA @ 120V 2700VA @
277V , 1500VA @ 347V Motor: 1/4 HP
@ 120V,
OSSMT-MD
ENVIRONMENTAL
Operating Temperature Range
Storage Temperature Range
Relative Humidity
32°F to 104°F (0°C to 40°C)
14°F to 185°F (-10°C to 85°C)
20% to 90% non-condensing
OTHER
Listings
Warranty
OSSMT-MD = Ul/cUL OSSMT-GD = ETL/cETL Listed, CSA
OSSMT-M3 = cETL Listed, CSA
CEC Title 24 Compliant, FCC Compliant
Limited Five-Year Warranty
Line
120-230-277VAC
50/60Hz
Note: Ground wire must be connected.
OSSMT-GD Wall Switch Occupancy Sensor Wiring Diagram,
Single Location Control
Sensor 1
Black (Hot)
Black
Sensor 2
Blue
DESCRIPTION
OSSMT-MDx
OSSMT-GDx
Multi-Technology Wall Switch Occupancy Sensor
No Neutral, Multi-Technology Wall Switch
Occupancy Sensor
OSSMT-M3x
Multi-Technology Wall Switch Occupancy Sensor
347V
Black
Load
Green
Ground
Green
Ground
Neutral (White)
Note: Ground wire must be connected.
OSSMT-GD Wall Switch Occupancy Sensor Wiring Diagram,
Two Location Control
* Replace x with (W) White, (I) Ivory, (T) Light Almond, (G) Gray, Ebony (-E), or Red (-R)
NOTE: OSSMT-M3x model available in (W) White and (I) Ivory only.
* NAFTA compliant and Made in USA models available.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Black
Line
120-230-277VAC
50/60Hz
ORDERING INFORMATION
CAT. NO. *
Blue
White
OSSMT
U/S & PIR
Power Consumption
OSSMT
PRODUCT DATA
LEVITON SPECIFICATION SUBMITTAL
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice
G-7357D/K11-tb
REV NOV 2011
PRODUCT DATA
Dual Relay Decora® Wall Switch
Multi-Technology Occupancy Sensors
OSSMD-FT
BASIC OPERATION
The PIR is used to detect motion and turn lights ON,
while either technology is used to keep lights ON
while occupied. This allows the Ultrasonic (U/S) to be
set to higher sensitivity levels minimizing false OFF
conditions. The PIR portion gives immunity to false ON
through a specialized lens that divides the field-ofview into sensor zones. When a person passes into or
out of a sensor zone, the sensor detects motion and
switches the primary lighting load ON while the secondary relay operaties in manual-ON/auto-OFF (MD/
GD models). With the FT models, both relays operate
in auto-ON/auto-OFF. The lights will remain ON as long
as there is an occupant moving through the sensor
zones. The U/S sensors give maximum sensitivity and
range in difficult spaces with irregular shaped rooms
and partitions that can block the PIR field-of-view. The
OSSMD also features the ability to turn off PIR or U/S
to become a single tech device.
APPLICATIONS
• Private and Executive offices
• Conference rooms
• Daylight harvesting
• Classrooms
• Restrooms
• Storage areas
• Training areas
• Multimedia rooms
• Day care centers
• Lounges • Retrofits
• Bi-level or A/B switching
• Multi-location switching (similar to 3-way)
The OSSMD provides automatic lighting control for
two separate loads from a single unit. It is compatible
with incandescent, fluorescent, low-voltage lighting,
and fan loads. The unit features dual manual-override
switches that can be used to toggle the ON/OFF
status of each lighting load while an area is occupied.
The OSSMD can be installed in place of two single-pole
wall switches and fits in a standard single-gang wall
box. To comply with CEC Title 24, the second relay is a
manual-ON only.
The OSSMD-FT is a Leviton exclusive model which also
provides automatic switching of two spearate loads
from a single unit. The unit features a single manual
override switch for the first relay. The second, “fan
relay”, is an auto-ON with relay 1 and has an extended
time delay of 10 minutes after relay 1. This provides
both energy efficiency and optimum ventilation control from a single device.
HOW THE OSSMD AUTOMATICALLY ADAPTS
CONDITION
EXAMPLE
ADAPTIVE REACTION
False-On:
Sensor
incorrectly
turns the
lights ON.
The sensor detects
movement in the
corridor or hallway
and the room light
turns ON.
After an initial movement
is sensed, if another
movement is not sensed
within the timer setting the
delayed off-time setting is
automatically reduced.
False-Off:
Sensor
incorrectly
turns the
lights OFF.
The sensor does
not detect movement because an
occupant is virtually motionless and
the lights turn OFF.
If motion is detected shortly after the lights go off,
the current delayed offtime setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSSMD
OSSMD-MD/-GD
OSSMD
PRODUCT DATA
FEATURES
•Provides automatic lighting control for two separate banks of fluorescent, incandescent, or lowvoltage lighting from a single unit.
•The second relay is a manual-ON only with a maximum 30 minute time-out for maximum energy savings to comply with CEC Title 24
•The OSSMD-FT is intended to control a light circuit
and a fan. The button on the sensor provides ON
control for both circuits and OFF for lighting circuits
only. The sensor will automatically turn ON both
when occupancy is detected. When no movement
is detected, the primary relay will turn OFF after the
delay OFF time expires. The fan will remain ON to
clear the airspace for an additional 10 minutes after
the time-out or button press.
•Fits in a standard single-gang wall box and replaces
two single-pole wall-switches for fast and easy
installation; neutral and ground connection required
for OSSMD-MD and OSSMD-FT. OSSMD-GD does not
require a neutral for installation.
•Low-profile design eliminates obtrusive “scanningdevice” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora
wallplates and coordinates with Leviton’s popular
line of Decora wiring devices.
•180° field-of-view provides approximately 2400
square feet of coverage, suitable for a variety of
commercial areas.
•Convenient pushbuttons provide manual-ON/OFF
light switching of each load at any time.
•Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive
“minor motion” area where even slight body movements will be detected.
•Vandal resistant PIR lens.
•Patented blinders - adjustable horizontal field-ofview (PIR) may be adjusted between 180° and 60° of
arc by using integral blinders located on either side
of the lens. No masking tape required.
•Manual-ON/auto-OFF mode for installations where
manual-ON switching is required but auto-OFF
switching is still desired for CEC Title 24 energy
savings.
•To comply with CEC Title 24, LED indicator light
flashes when sensor detects motion to verify
detection is active. Green flashes for ultrasonic, red
flashes for PIR.
•Time delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes,
20 minutes, and 30 minutes. Allows customized
adjustments to maximize energy savings.
•Light sensor measures the ambient light in the
room when it first detects motion and leaves the
lights OFF (hold-off) if there is enough light in the
room or turns the lights connected to the first relay
ON if there is not enough light in the room.
•Self-Adaptive technology eliminates callbacks for
adjustments. Time delay and sensitivity settings are
continually adjusted to occupant patterns of use in
auto adapt mode.
•Exclusive Walk-Through feature provides increased
energy savings by not leaving the lights ON for an
extended period after only momentary occupancy.
•Non-Adaptive Mode disables self-adjusting delayedOFF time and walk-through feature in applications where these feature are not desired. Optional
manual adjustment for delayed-OFF time settings
allows customized adjustments to maximize energy
savings.
•Vacancy confirmation; when the time out expires
and the relay turns OFF, a 30-second vacancy confirmation exists to turn the relays back ON.
•False detection circuitry.
•U/S technology provides excellent minor motion
sensitivity.
•Ability to disable PIR or U/S for added flexibility.
•Presentation Mode feature for slide or film presentations allows pushbuttons to turn lights OFF and
keep them OFF while the room is occupied.
•Exclusive Leviton High Inrush Stability (H.I.S.)
Circuitry. Specifically designed to handle today’s
high inrush electronic ballast loads and offer
unmatched durability and service.
•One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic
ballasts.
•True zero-cross relay switches at the zero crossing
point of the AC power curve to ensure maximum
contactor life and compatibility with electronic
ballasts.
20
0
20
30
5
4
0
INSTALLATION
The OSSMD mounts in a standard single-gang wall
box and replaces two single-pole wall switches
that control two separate lighting loads. The unit
must be properly grounded in order to operate.
The unit’s integral blinders may be used to restrict
the field-of-view to prevent unwanted detection
of hallway traffic. The OSSMD should be positioned at least 6 feet away from HVAC registers.
Note that whenever the unit is powered up, it
will take approximately 1 minute to begin normal
operation.
SIDE VIEW
0
20
40
Major Motion, PIR
Major Motion, U/S
Major Motion, PIR
Major Motion, U/S
OSSMD Field-of-View (in feet)
Minor Motion= Dual Technology coverage. This also represents the
maximum ultrasonic range coverage.
Sensor 1
Sensor 2
Red
Red
Hot (Black)
Phase 1
Black
White
Line
120-230-277VAC
60Hz
Black
Red
Blue
Secondary
Load
Red
Blue
White
Green
Ground
Green
Ground
Primary
Load
Neutral (White)
MULTI-LOCATION
OSSMD
FIELD-OF-VIEW
The OSSMD provides a 180° field-of-view with a
maximum coverage area of approximately 2400
square feet. The maximum major motion sensing distance in front of the sensor is 40 feet,
and side to side is 30 feet. The “minor-motion”
zone detects relatively small body movements
and allows the lights to stay ON even though a
person may not be moving or walking around the
room. This zone is approximately 40 feet by 20
feet.
TOP VIEW
30
WIRING DIAGRAMS
Sensor
Sensor
Red
H
Phase 1
Black
White
Line
120-230-277VAC
50/60Hz
Red
H
Phase 1
Red
Black
Blue
Red
Blue
Load
Load
Line
120-230-277VAC
50/60Hz
Load
Ground
Neutral (White)
Ground
Neutral (White)
Note: Ground wire must be connected.
OSSMD-MD/OSSMD-FT
OSSMD-GD
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Load
PRODUCT DATA
SPECIFICATIONS
DIMENSIONAL DIAGRAMS
ELECTRICAL
Operational
Frequency
U/S Operating
Frequency
Wire
Designation
Load Rating
1.75in/44.4mm
120-230-277 VAC
-FT
120V
220mW
277V
430mW
50/60Hz
-MD
210mW
410mW
0.48in/12.6mm
1.30in/33.0mm
1.35in/34.4mm
40kHz
Primary RelayNo. 16 AWG leads:
Line-Black
Load-Blue
Ground-Green
White-Neutral
(where provided)
Primary Relay:
Fluorescent:
1200VA @ 120V
2700VA @ 277V
Incandescent:
800W @ 120V
ENVIRONMENTAL
1.75
(44.4 mm)
Operating Temperature Range
1.30
(33.0 mm)
Storage Temperature Range
Relative Humidity
Secondary RelayNo. 16 AWG isolated
contact leads: (2) Red
Secondary Relay:
Fluorescent:
800VA @ 120V
1200VA @ 277V
Incandescent:
800W @ 120V
Motor: 1/4 HP
BOTTOM
Mounting Yoke
32°F to 104°F (0° C to
40°
C)mm)
0.48
(12.6
-50°F to 185°F (-10° C to 85° C)
20% to 90% non-condensing
1.35
Vandal
Resistant
PIR Lens
(34.4 mm)
OTHER
ETL/cETL Listed, CSA, CEC Title 24 Compliant, FCC Compliant, NOM
Warranty
Limited Five-Year Warranty
Patented
Masking
Blinders
2.60 (66.2 mm)
ORDERING INFORMATION
2.61 (66.3 mm)
Listings
4.06 (103.2 mm)
OSSMD
-GD
140mW
360mW
2.60in/66.2mm
Line Voltage
Power
Consumption
Control Panel,
Cover Removed
1
2
4
7
4
7
3
10
10
TIME RANGE LIGHT
LED and
Light Sensor
Ultrasonic
Sensors
Pushbutton 2 *
CAT. NO.*
DESCRIPTION
OSSMD- MD
Dual Relay Multi-Tech Wall Switch Occupancy Sensor
OSSMD- GD
No Neutral,
Dual Relay Multi-Tech Wall Switch
BOTTOM
Occupancy Sensor
OSSMD- FT
Dual Relay Multi-Tech Wall Switch Occupancy Sensor
with 10-minute Delayed-OFF for Second Relay
Pushbutton 1
BOTTOM
* Not present in OSSMD-FT
* To indicate color, add suffix to the end of the catalog number.
White (-W), Ivory (-I), Light Almond (-T), Gray (-G), Ebony (-E), and Red (-R)
* NAFTA compliant and Made in USA models available.
LEVITON SPECIFICATION SUBMITTAL
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8013C/K11-tb
REV NOV 2011
PRODUCT DATA
Decora® Wall Switch PIR Occupancy
Sensor with LED NightLight
NightLight High Level
BASIC OPERATION
The passive infrared (PIR) sensor detects motion
from a heat-emitting source within its field-ofview to automatically switch lights ON and OFF,
offering the same performance features as the
ODS family of occupancy sensors. OSSNL has the
ability to reduce (dim) and turn off the “Guide
Light” function with a simple dial setting. The LED
NightLight consumes less than 1/2 W providing
energy savings and guide lighting when room
lights are off.
APPLICATIONS
OSSNL is perfect for use in hospitality and health
care facilities with either auto-ON or manual-ON
settings with adjustable time delay settings of 30
seconds to 2 hours.
The NightLight Occupancy Sensor Wall Switch
can be used to provide automatic lighting control for energy savings and convenience in a
variety of commercial applications, including:
• Hotel restrooms
• Conference rooms
• Small offices
• Storage areas
• Hospital restrooms
• Classrooms
• Lounges
• Bathrooms
FEATURES
•Fits in standard wallbox and replaces single-pole
wall switch; ground and neutral connection required.
Gangable with other units.
•Low-profile design eliminates obtrusive “scanningdevice” look. Elegant Decora wallplates complement
any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of
Decora wiring devices.
•180° field-of-view provides approximately 2100 SF of
coverage.
•Convenient pushbutton provides manual-ON/OFF
light switching at any time.
• Two dual element PIR sensors used to widen detection range.
•Segmented Fresnel lens provides optimum sensitivity
and performance. Designed with an extensive “minor
motion” area where even slight body movements will
be detected.
•Vandal resistant PIR lens.
•Patented blinders - horizontal field-of-view may be
adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens. No
masking tape required.
•Manual-ON/auto-OFF mode for installations where
manual-ON switching is required but auto-OFF
switching is still desired for CEC Title 24 energy
savings.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSSNL
NightLight Off
PRODUCT DATA
OSSNL
FEATURES CONT.
•To comply with T24, red LED indicator light flashes
when sensor detects motion to verify detection is
active.
• Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20
minutes, and 30 minutes. Allows customized adjustments to maximize energy savings.
•Light Sensor Adjustable Ambient Light Override
ranges from approximately 2 foot-candles (20 lux) to
500+ foot-candles (5000+ lux) to prevent lights from
turning ON automatically during periods of ample
natural light, increasing energy savings.
•Light sensor enables the load hold-OFF feature once
level has been set.
• Vacancy confirmation - when the time out expires and
the relays turn OFF, a 30 second vacancy confirmation
exists to turn the relays back ON.
•False detection circuitry.
•Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep
them OFF while the room is occupied.
•LED NightLight offers “Guide Light” functionality.
•Adjustable NightLight illumination setting for continuous or dimmed NightLight.
•NightLight Mode - the factory default setting for the
NightLight Mode is Dimmed Mode. This means the
NightLight will automatically dim to 5% of full brightness after 2 minutes of no occupancy when activated
by the internal light sensor.
•One unit can be used for 120V through 277V lighting.
Compatible with both electronic and magnetic ballasts.
•Relay switches at the zero crossing point of the AC
power curve to ensure maximum contact life and
compatibility with electronic ballasts.
•Exclusive Levition H.I.S. Circuitry. Specifically designed
to handle today’s high inrush electronic ballast loads
and offer unmatched durability and service.
FIELD OF VIEW
The OSSNL provides a 180° field of view with a maximum coverage area of approximately 2100 square
feet. The maximum sensing distance in front of
the sensor is 40 feet, and at each side is 30 feet. A
“minor-motion” zone detects relatively small body
movements and allows the lights to stay ON even
though a person may not be moving or walking
around the room. The remainder of the field of view,
the “major-motion” zone, exhibits a lesser degree of
sensitivity and requires larger movements.
40
TO P VIEW
30
15
0
15
30
40
5
4
0
M ajor M otion,IR
M inor M otion,IR
SID E VIEW
0
15
40
OSSNL
Field-of-View (in feet)
O D SXX-ID
INSTALLATION
The OSSNL is preset to deliver optimum performance
in a wide variety of applications without requiring any
adjustments during installation. The unit may replace
a single-pole wall switch mounted in a standard
wall box. The unit must have a neutral and be properly grounded in order to operate. The unit’s integral
blinders may be used to restrict the field-of-view to
prevent unwanted detection of hallway traffic. It
should be positioned at least 6 feet away from HVAC
registers. Note that whenever the unit is powered up,
it will take approximately 1 minute to begin normal
operation.
OSSNL/OSS10
Blue
Black (Hot)
Black
Line
120-230-277VAC, 50/60Hz
White
Black
Load
Green
Ground
White
Neutral (White)
OSSNL Wall Switch Occupancy Sensor Wiring Diagram,
Single Location Control
DIAGRAMS
Blinder adjustment levers
30M
1H
30S
4
7
4
AU
TO
10
2H
TIM E
MA
N
BLINDERS
RANGE
ON MODE/NL DIM
Control Panel Cover
OSSNL Sensor Features
0.48 (12.6 mm)
2.60 (66.2 mm)
4.06 (103.2 mm)
2.61 (66.3 mm)
1.35
(34.4 mm)
Vandal
Resistant
Lens with
PIR and LED
Night Light
LED
Indicator
and Light
Sensor
Dimensions Night Light
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Patented
Blinders
Control Panel
Cover
Pushbutton
OSSNL
1.75
(44.4 mm)
1.30
(33.0 mm)
PRODUCT DATA
SPECIFICATIONS
ELECTRICAL
Line Voltage
120-230-277VAC
Power
Consumption
120V, Nightlight OFF - 190mW
120V, Nightlight ON max - 350mW
277V, Nightlight OFF - 250mW
277V, Nightlight ON max - 410mW
Operational
Frequency
50/60Hz
Wire
Designation
Line - Black
Load - Blue
Ground - Green
Neutral - White
Load Rating
Fluorescent: 1200VA @ 120V,
2700VA @ 277V Incandescent: 800W @ 120V,
Motor – 1/8 HP @ 120V
ENVIRONMENTAL
Operating
Temperature
Range
32° to 122°F (0°C to 50°C)
Storage
Temperature
Range
14°F to 185°F (-10°C to 85°C)
Relative Humidity 20% to 90% non-condensing
OSSNL
OTHER
Listings
CUL/US Certified, NOM
CEC Title 24 Compliant, FCC Compliant
Warranty
Limited Five-Year Warranty
ORDERING INFORMATION
CAT. NO. *
DESCRIPTION
OSSNL-IDx
Occupancy Sensor Wall Switch with
NightLight
To indicate color, add suffix to the end of the catalog number.
White (-W) , Ivory (-I), Light Almond (-T), Gray (-G), Black (-E) and Red (-R).
*NAFTA compliant and Made in USA models available.
LEVITON SPECIFICATION SUBMITTAL
JOB NAME: CATALOG NUMBERS:
JOB NUMBER:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7543B/K11-tb
REV NOV 2011