SliverLED
SS11
DOWNLIGHT
®
PROJECT INFORMATION
PROJECT
DATE
TYPE
1” REGRESS
SliverLED Recessed Downlight - The highest performing recessed LED downlight product family with a 1-3/4" aperture, SliverLED provides
a true point source solution where previously only halogen and metal halide sources would do, with all of the efficiency and lifetime
benefits of LED.
1" Regress Trim
DELIVERED PERFORMANCE
SliverLED
15 Watts Max.
®
White Baffle
DOWNLIGHT
Color Rendering Index
Lumens per Watt
Source Lumens
Delivered Lumens
Color Consistency
Black Baffle
80+
90+
80+
90+
82
71
64
56
1600
1400 1600
1400
1125
975
875
775
2-Step MacAdam Ellipse
For flush-mount installations,
order spackle collar
accessory
4" Ø
4" Ø
Performance based on 3000K, 25° beam
2700K
CCT MULTIPLIER
Color Rendering Index
Multiplier for
Lumen Output
3000K
1"
Regress
1/16"
3500K
4000K
80+
CRI
90+
CRI
80+
CRI
90+
CRI
80+
CRI
90+
CRI
80+
CRI
0.93
0.81
1.00
0.87
1.07
0.87
1.07
6"
3-9/16" Ø
13⁄4”
6"
315⁄16”
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order: SS11 - BL - X115 - 30KS - 25 - S - WH - SV - X115 - NC - 120V - DIML2
TRIM ORDERING INFORMATION
TRIM
BAFFLE FINISH
–
SS11
SS11
SliverLED
Square
Downlight
1" Regress
LED LIGHT ENGINE
–
WH White
BL Black
COLOR
X115 15W LED Module
LENS
OPTIC
–
X115
–
27KS
30KS
35KS
40KS
27KH
30KH
35KH
2700K, 80+ CRI
3000K, 80+ CRI
3500K, 80+ CRI
4000K, 80+ CRI
2700K, 90+ CRI
3000K, 90+ CRI
3500K, 90+ CRI
–
25 25° Distribution
35 35° Distribution
50 50° Distribution
TRIM FINISH
–
S
S Solite
(provided standard)
WH
BZ
BL
GR
PR
RAL
White
Bronze
Black
Metalized Grey
Primer Finish
Custom Color
(specify RAL #)
HOUSING ORDERING INFORMATION
PRODUCT
SV
LED LIGHT ENGINE
–
SV
SliverLED
X115
X115 15W LED Module
VOLTAGE
HOUSING
–
–
NC
IC
New Construction
Mounting Pan
Insulation-Contact
Rated / Airtight
IC-rated housing
available
December 2016
120V
277V
120V
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
DIMMING DRIVER
–
For flush-mount installations,
order spackle collar
accessory below
ACCESSORY
ORDERING INFORMATION
EM OPTIONS
ACCESSORIES
EM Emergency battery
EMW Emergency battery,
wet location
CB27 27" C-Channel Bars
CB52 52" C-Channel Bars
SCS2 Square Spackle Collar
accessory for flush mount
installation in sheet rock
–
For Use With 120V or 277V
DIML2 0-10V dim, 10%
(provided standard)
DIML4 Lutron Hi-Lume
1%, 3-wire/EcoSystem
DIML6A ELDO 0-10V,
0.1%, logarithmic/
Lutron controls
DIML6B ELDO 0-10V,
0.1%, linear/
Crestron controls
DIML6E EldoLED 0-10V, 1%,
logarithmic/Lutron controls
DIML6F EldoLED 0-10V, 1%, linear
controls
For Use With 120V Only
DIML3 Lutron Hi-Lume
1%, 2-wire, 120V only
DIML19 Phase 2-wire dimming, 1%
120V only
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
EM options not available
with IC housings.
© 2016 USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 08/08/2016
SliverLED
DOWNLIGHT
1" REGRESS
®
SS11
TRIM INFORMATION
For flush-mount installations,
use spackle collar
accessory
SCS2 - Square spackle collar accessory for flush
mount applications in sheetrock
4" Ø
1"
Regress
1/16"
4" Ø
3-9/16" Ø
6"
13⁄4”
315⁄16”
6"
HOUSING INFORMATION
Insulation Contact Rated / Airtight - IC
(PRELIMINARY - Available December 2016)
New Construction Housing - NC
Mounting Pan
(Max. Ceiling Thickness - 1")
117/8"
41/8"
51/8"
5
51/8" 6 /8"
1"
11/8"
41/8"
81/2"
4 /4"
11 /4"
3
1
75/8"
Note: Nailer bars are
provided standard
121/4"
125/8"
161/8"
16"
195/8"
SPECIFICATIONS
TRIM: 1-3/4" square aperture with a 1" regressed lens and
1" flange, retained by two mounting clips. Trim finish is
available in White, Statuary Bronze, Black, and Metalized
Grey finishes. Primer finish available for field painting.
Custom colors also available - just provide RAL#.
BAFFLE OPTIONS: Black or white matte high temperature
nylon baffles available.
TRIM LENS: Solite lens provided standard.
REFLECTOR: Interchangeable tool-less reflector system
allows for flexibility while maintaining design consistency.
Available in 25°, 35° or 50° beam distribution.
FIELD REPLACEABLE LIGHT ENGINE: Available in
15W (1125 delivered lumens). Engine is field replaceable
through the aperture with a screwdriver.
COLOR: SliverLED is available in 4 color temperatures
(2700K, 3000K, 3500K and 4000K). All color options are
tightly binned for fixture-to-fixture color consistency within
a 2-Step MacAdam Ellipse. 80+ provided standard.
RATED LIFE: Based on IESNA LM80-2008 50,000 hours at
70% lumen maintenance (L70).
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
THERMAL MANAGEMENT: Proprietary high performance
aluminum die cast heatsink for maximum LED life. Ambient
temperatures at fixture location should not exceed 40°C
during normal operation.
MOUNTING: Butterfly brackets and adjustable
nailer bars with integral nails provided. Nailer bars
are extendible from 14" to 24" centers. channel bars
optionally available for dropped ceiling installation.
FIELD REPLACEABLE DIMMING DRIVER: 0-10V, 100%-10%
solid state electronic constant current DIML2 dimming
driver with a high power factor provided standard and
sources 2mA. Specify 120V or 277V. Driver complies with
IEEEC62.41 surge protection.
HOUSING: Universal housing style allows the ability
to swap trim styles between Downlight, Adjustable
and Wall Wash. Fabricated of 18 ga. black powder
coated steel with thru wire J-box, 2 in 2 out at min.
90°C, #12 AWG thru branch circuit wiring.
DIMMING OPTIONS: Multiple dimming drivers available.
See compatibility chart attached. Some on-time delay may
be experienced depending on control system used. Note:
DIML6A and 6E logarithmic control are intended for use
with Lutron control systems; DIML6B and DIML6F linear
control are intended for use with non-Lutron controls. DIML6
dimming drivers source 2mA.
CEILING CUT OUT: 3-5/8" Ø
EMERGENCY: Emergency lighting battery pack with
remote test switch requires above ceiling access. Bodine
BSL17C-C2 provides 260mA for 90 minutes; delivers
~850 lumens. Wet location option also available. EM not
available with IC housings.
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
LISTINGS: Dry/Damp/Wet. NRTL Tested to UL
Standards. IBEW Union made.
WARRANTY: 5 years
NOTES:
• Not for use in corrosive environment.
• Use spackle collar accessory for flush-mount,
spackle-in sheetrock applications
• Interior use only.
PHOTOMETRICS: Consult factory or website for IES
files. Tested in accordance with IESNA LM79-2008.
© 2016 USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 08/08/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML2
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%)
DIML2 Dimmer Compatibility Chart
Manufacturer
120V / 277V
Crestron
Crestron
Crestron
Crestron
Crestron
Leviton
Lightolier (Philips)
Lutron
Product
Part Number
Dimmed Light
Output Range
iLux dimmer expansion module
DIN Rail dimmer
DIN Rail analog output module
8 Channel dimmer module
8 Channel dimmer module
IllumaTech dimmer
Vega
Diva
CLS-EXP-DIMFLV
DIN-4DIMFLV4
DIN-A08
GLX-DIMFLV8
GLXP-DIMFLV8
IP710-DLX
V2000FAMU
DVTV-XX
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
Qty Fixtures
Per Dimmer*
Use source current per
fixture specification
sheet to determine
number of fixtures per
dimmer. Max number
of fixtures is limited by
dimmer load rating.
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIML2
0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
DIMMER: 0-10V
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GND
CLASS 2 CONTROL WIRES
LINE
RELAY
(BY OTHERS)
NEUTRAL
DIMMER: 0-10V w/
POWER SWITCHING
DIML2
0-10V DIMMING (NO RELAY)
FIXTURE
(BY OTHERS)
LINE
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GROUND
GND
NEUTRAL
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-2 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML3
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V only.
DIML3 Dimmer Compatibility Chart
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
Part Number
Dimmed Light
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Maestro Wireless® 600W dimmer
Maestro Wireless® 1000W dimmer
HomeWorks® QS adaptive dimmer
HomeWorks® QS 600W dimmer
HomeWorks® QS 1000 W dimmer
Caseta Wireless® Pro 1000W dimmer
Stanza® dimmer
RadioRA® 2 adaptive dimmer
RadioRA® 2 1000 W dimmer
myRoom DIN power module
HomeWorks® QS wallbox power module
Homeworks® DIN power module
HomeWorks® wallbox power module
GRAFIK Eye® QS control unit
GRAFIK Eye® 3000 control unit
RPM-4U module
RPM-4A module
GP dimming panels
Ariadni CL 250W dimmer
Diva CL 250W dimmer
Grafik T CL or RF CL dimmer
Nova T CL 250W dimmer
ELV10
ELV10
MRF2-6ND-120MRF2-10ND-120HQRD-6NAHQRD-6NDHQRD-10NDPD-10NXDSZ-6NDRRD-6NARRD-10NDMQSE-4A1-D
HQRJ-WPM-6D-120LQSE-4A1-D
HWI-WPM-6D-120
QSGR-, QSGRJGRX-3100-, GRX-3500HW-RPM-4U-120, LP-RPM-4U-120
HW-RPM-4A-120, LP-RPM-4A-120
Various
AYCL-253PDVCL-253P-, DVSCCL-253PGT-250M-, GTJ-250MNTCL-250-
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100%-1%
100%-1%
100%-1%
100%-1%
Qty Fixtures Per Dimmer*
Fixture Wattage
39W and Less 40W - 80W
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1 – 13
1–6
1–8
1–4
1–8
1–4
1 – 13
1–6
1 – 13
1–6
1–8
1–4
1–8
1–4
1–6
1–3
1–6
1–3
1 – 26
1 – 13
1–6
1–3
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1–8
1–4
1–8
1–4
1 – 10
1–5
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIML3
2 WIRE PHASE DIMMING
FIXTURE
DIMMER: 2 WIRE PHASE
(BY OTHERS)
LED
LINE
SWITCHED HOT
NEUTRAL
GROUND
BLACK
WHITE
DRIVER
V+
RED
V-
BLACK
GREEN
GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-3 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML4
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
DIML4 3-Wire Dimmer Compatibility Chart
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
277V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
Part Number
Dimmed Light
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Vareo
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10NTF-103PNF-10NF-103PVF-10SF-10P-, SF-103PDVF-103P-, DVSCF-103PAYF-103PVTF-6AMAF-6AM-, MSCF-6AMMRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-120, PHPM-3F-DV
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10-277NTF-103P-277NF-10-277NF-103P-277SF-12P-277-, SF-12P-277-3
DVF-103P-277-, DVSCF-103P-277AYF-103P-277VTF-6AMAF-6AM-277-, MSCF-6AM-277MRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-DV
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–53
1–26
1–53
1–26
1–41
1 – 20
1–20
1 – 10
1–41
1 – 20
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–15
1–7
1–15
1–7
1–15
1–7
1–15
1–7
1–15
1–7
1–41
1 – 20
1–41
1 – 20
40W and Less 41W - 80W
1–53
1–26
1–53
1–26
1–44
1 – 22
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–20
1 – 10
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–88
1 – 44
1–88
1 – 44
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
DIML4 wiring diagrams continued on next page
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML4 Continued
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
DIML4
3 WIRE PHASE DIMMING
FIXTURE
DIMMER: 3 WIRE PHASE
(BY OTHERS)
CAP UNUSED
ECOSYS WIRES
DIMMED HOT
SWITCHED HOT
NEUTRAL
LINE
LED
PURPLE GRAY
PURPLE
ORANGE
BLACK
WHITE
GREEN
GROUND
DRIVER
V+
RED
V-
BLACK
GND
NEUTRAL
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with EcoSystem Control / LED Dimming Driver Wiring (Dims down to 1%)
Manufacturer
120V / 277V
Lutron
Lutron
Lutron
Lutron
DIML4 EcoSystem Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Product
PowPak dimming module
Energi Savr Node
GRAFIK Eye QS (120V ONLY)
Quantum
RMJ-ECO32-DV-B
QSN-1ECO-S, QSN-2ECO-S
QSGRJ-_E, QSGR-_E
Various
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–32
1 – 16
1–64
1 – 32
1–64
1 – 32
1–64
1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
DIML4
EcoSystem CONTROLS
ECOSYS BUS
E2
E1
E2
FIXTURE
E1
WALL CONTROL
(BY OTHERS)
LINE
NEUTRAL
CAP
UN-USED
ORANGE
WIRE
PURPLE GRAY
PURPLE
ORANGE
BLACK
WHITE
GREEN
LED
DRIVER
V+
RED
V-
BLACK
GND
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML6A, 6E
DIML6B, 6F
®
USAI
Lighting
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML6A and DIML6E LED Dimming Compatibility Table
DIML6A and DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below)
DIML6A = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1%
DIML6E = EldoLED ECOdrive 0-10V control dims from 100% to 1%
Dimmed Light Qty Fixtures
Manufacturer Product
Part Number
Output Range Per Dimmer*
Refer to manufacturer's
120V & 277V
DIML6A / E
Lutron
Diva
DVTV/NFTV/NTFTV with PP-20
99% - 0.1% / 1% dimmer load rating for
Lutron
Energi Savr Node
QSN-4T16-S
100% - 0.1% / 1% maximum and minimum
Lutron
GP Dimming Panels TVM2 Module
99% - 0.1% / 1% fixture quantities per
Lutron
Interfaces
GRX-TVI w/ GRX3503
100% - 0.1% / 1% dimmer.
Sensor Switch nIO
nIO EZ
100% - 0.1% / 1%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIML6B and DIML6F LED Dimming Compatibility Table
DIML6B and DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-Lutron and others listed in the table below)
DIML6B = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1%
DIMMER: 0-10V
DIML6F = EldoLED ECOdrive
(BY OTHERS) 0-10V control dims from 100% to 1%
0-10V (-)
GRAY
0-10V (+)
PURPLE
LED
DIML6B Dimmer Compatibility Chart
Dimmed Light
Qty Fixtures
V+
RED
SWITCHED HOT
SWITCHED
HOTNumber DRIVER
Manufacturer
Product
Part
Output Range
Per Dimmer*
VBLACK
NEUTRAL
WHITE
Refer to
120V & 277V
DIML6B / F
GREEN 2112U-101
Bush-Jaeger
Electronic potentiometer
100% - 0.1% / 1% manufacturer's
Jung
Electronic potentiometer
100% - 0.1% / 1% dimmer load
GND 240-10
CLASS 2 CONTROL WIRES
Leviton
IllumaTech dimmer
IP710-DLX
100% - 0.1% / 1% rating for
LINE
Lightolier
(Philips) Momentum (120V ONLY)
ZP600FAM120
100% - 0.1% / 1% maximum and
RELAY
Merten
Electronic
potentiometer
5729
100% - 0.1% / 1% minimum fixture
(BY OTHERS)
DIML6A,
6B
Pass & Seymour Titan
CD4FB-W
100% - 0.1% / 1% quantities per
NEUTRAL
TO SWITCH POWER
Watt Stopper
Miro 0-10V DIMMING W/RELAY
DCLV1
100% - 0.1% / 1% dimmer.
Synergy
Wallbox Dimmers
ISD BC
100% - 0.1% / 1%
ABB
i-bus
SD/S 2.16.1
100% - 0.1% / 1%
Crestron
Modules
GLX-DIMFLV8, GLXP-DIMFLV8
100% - 0.1% / 1%
Crestron
Green Light
GLPAC-DIMFLV4-, GLPAC-DIMFLV8100% - 0.1% / 1%
DIML6A, 6B
0-10V (-)
Crestron
Green Light Power Pack
GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM,
GLPP-1DIMFLV3EX-PM
100% - 0.1% /FIXTURE
1%
0-10V DIMMING
W/RELAY TO GRAY
SWITCH POWER
0-10V (+)
PURPLE
DIMMER: 0-10V
Crestron
DIN Rail Analog Output Module
DIN-A08
100% - 0.1% / 1% V+ RED
SWITCHED HOT
BLACK
Crestron
DIN Rail 0-10V Fluorescent Dimmer
DIN-4DIMFLV4
100% - 0.1% / 1% LEDV- BLACK
NEUTRAL
WHITE
GREEN
Crestron
iLux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV
100% - 0.1% / 1%
DRIVER
GND
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions andCLASS
circuit
details.
2 CONTROL WIRES
(BY OTHERS)
LINE
DIMMING DRIVER WIRING SCHEMES:
RELAY
(BY OTHERS)
NOTES:
NEUTRAL
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
DIML6
0-10V DIMMING (NO RELAY)
DIML6
0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
(BY OTHERS)
LED
DRIVER
V+
RED
V-
BLACK
LINE
GREEN
GROUND
GND
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
GREEN
GND
CLASS 2 CONTROL WIRES
LINE
FIXTURE
DIMMER: 0-10V w/
POWER SWITCHING
DIMMER: 0-10V
RELAY
(BY OTHERS)
NEUTRAL
NEUTRAL
USAI
Lighting
®
www.usailighting.com
DIML6A, 6B
info@usailighting.com
1126 River Road
New Windsor, NY 12553
0-10V DIMMING (NO RELAY)
DIMMER: 0-10V w/
POWER SWITCHING
(BY OTHERS)
FIXTURE
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-6 Revised 05/20/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML19
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML19 LED: Hatch XTC series or equivalent - Forward and Reverse Phase Dimming Driver.
Dims down to 1% contingent upon dimmer specification and load. 120V only.
DIML19
2 WIRE PHASE DIMMING
FIXTURE
DIMMER: 2 WIRE PHASE
(BY OTHERS)
LED
LINE
SWITCHED HOT
NEUTRAL
GROUND
BLACK
DRIVER
WHITE
V+
RED
V-
BLACK
GREEN
GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
DIML19 Dimmer Compatibility Chart
120V ONLY
Forward Phase / TRIAC Dimming
Manufacturer
Product
Qty Fixtures Per Dimmer
Leviton
IPL06-10Z
Use fixture wattage per
6613-xxx
fixture specification
Lutron
S-600P
sheet to determine
S-603P
number of fixtures
DV-600P
per dimmer. Max number
DV-603P
of fixtures is limited by
DVSC-603P
dimmer load rating.
CT-600P
CT-603P
120V ONLY
Reverse Phase / ELV Dimming
Manufacturer
Product
Leviton
6615
IPE04-xxx
Lutron
NTELV-300
NTELV-600
SELV-300P
SELV-303P
DVELV-300P
DVELV-303P
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
Qty Fixtures Per Dimmer
Use fixture wattage per
fixture specification
sheet to determine
number of fixtures
per dimmer. Max number
of fixtures is limited by
dimmer load rating.
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-19 Revised 07/29/2016