The Archetype
®
Small 70-150W Luminaire
FEATURES
S I T E / R OA D WAY
SAR
•
Pulse start metal halide or high pressure sodium technology
•
Efficient, effective downward control of light with full uplight cutoff
•
Easy-access, tool-less latches for lower maintenance
ORDERING INFORMATION (Example)
1SA
SAR1
MOUNTING
1SA 1 Arm Side Mt.
2SB 2 Arm Side Mt.
2SL 2 Arm Side Mt.
3ST 3 Arm Side Mt.
3SY 3 Arm Side Mt.
4SC 4 Arm Side Mt.
1W Single Wall Mt.1
100PMH120 SG
EPA
0.7
1.4
1.2
1.9
1.9
2.5
—
FIXTURE
SAR - Horizontal
SAR1 Horizontal Type I
SAR2
SAR3
SAR4
SAR5
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray™
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE OPTIONS
A-30 120 Volt photocell
A-30 120 Volt photocell
A-31 208 Volt photocell
A-32 240 Volt photocell
A-33 277 Volt photocell
A-34 480 Volt photocell
A-35 347 Volt Photocell
CGL Convex Glass Lens
*Consult representative
NOTE: EPA is for Fixture only
Horizontal Type II
ELECTRICAL MODULE
70PMH 70W PMH
100PMH 100W PMH
150PMH 150W PMH
Horizontal Type III
70HPS 70W HPS
100HPS 100W HPS
150HPS 150W HPS
Voltages
Horizontal Type IV
120
208
240
277
347
480
Horizontal Type V
—
A-30
120
208
240
277
347
480
120V
208V7
7
240V
277V
347V
480V
POLE / POLE ARM
LS Polycarbonate Lens2
HS Houseside shield3
HSC Houseside shield for
Convex Glass Lens4
NFS Neighbor Friendly
Backlight Shield5
TL Tamper Resistant Latch6
AF Air Filter
55IF 55W IF8
Voltages
120V
208V7
7
240V
277V
Voltages
120
208
240
277
120V
208V7
240V7
277V
347V
480V
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
IF = Induction Fluorescent
1
2
3
4
5
Junction box in wall must provide adequate fixture support.
Use only in high-vandalism situations. Useful life is limited
by UV discoloration from sunlight and metal halide lamps.
Recommended for clear lamps only. Not for use with Type V
light distributions.
For use with all fixtures with convex glass lens. Not for use
with Type V light distributions.
Only available wth Type IV reflectors.
6
7
8
Required only for vandal protection in locations
where fixtures can be reached by unauthorized
persons.
Constant wattage isolated ballast is required on all
208V and 240V Canadian orders.
55W IF available in type III distribution only.
THE ARCHETYPE SMALL
5"
17B"
(127 mm)
(432 mm)
6"
4J" (102 mm)
(152 mm)
1L"
17B"
(432 mm)
716
(25 mm)
Arm
cross-section
12"
(305 mm)
PRA12-5125SA/SG
See p. 766-770 for ordering
no., pole and arm EPA.
SLIPFITTER MOUNTING OPTIONS
VERTICAL
4” Round, Standard Fixtures
VSF-1SA 1 fixture side mt.
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
HORIZONTAL
HSF for Pole Davit Arm
NOTE: Due to the Energy Independence and Security Act
(EISA) of 2007, Kim Lighting can no longer supply probe
start Metal Halide ballasts with its luminaires, effective
January 1, 2009. Contact Kim Lighting for availability
of replacement ballasts for warranty service claims.
(Visit www.aboutlightingcontrols.org or the Library of
Congress website for more details).
The Archetype
®
Large 150-400W Luminaire
FEATURES
AR
Pulse start metal halide or high pressure sodium technology
•
Efficient, effective downward control of light with full uplight cutoff
•
Easy-access, tool-less latches for lower maintenance
S I T E / R OA D WAY
•
ORDERING INFORMATION (Example)
1A
AR1
MOUNTING
1A 1 Arm Side Mt.
2B 2 Arm Side Mt.
2L 2 Arm Side Mt.
3T 3 Arm Side Mt.
3Y 3 Arm Side Mt.
4C 4 Arm Side Mt.
1W Single Wall Mt.1
250PMH120
EPA
1.2
2.4
2.0
3.2
3.2
3.9
—
NOTE: EPA is for Fixture only
FIXTURE
AR - Horizontal
AR1 Horizontal Type I
AR2
AR3
AR4
AR5
1
2
3
4
5
Horizontal Type II
Horizontal Type III8
Horizontal Type IV
Horizontal Type V
SG
A-30
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray™
PS Platinum Silver
WH White
CC Custom Color*
*Consult representative
VSF-1A
FIXTURE OPTIONS
A-30 120 Volt photocell
A-30 120 Volt photocell
A-31 208 Volt photocell
A-32 240 Volt photocell
A-33 277 Volt photocell
A-34 480 Volt photocell
A-35 347 Volt Photocell
CGL Convex Glass Lens
PRA20-5125A/SG
POLE
LS Polycarbonate Lens2
HS Houseside shield3
HSC Houseside shield for
Convex Glass Lens4
NFS Neighbor Friendly
Backlight Shield5
TL Tamper Resistant Latch6
TB Terminal Block
See p. 766-770 for ordering
no., pole and arm EPA.
SLIPFITTER MOUNTING OPTIONS
VERTICAL
4” Round, Standard Fixtures
VSF-1A 1 fixture side mt.
AF Air Filter
VSF-2B
VSF-2L
VSF-3T
VSF-3Y
VSF-4C
ELECTRICAL MODULE
250PMH
320PMH
350PMH
400PMH
150HPS 150W HPS
250HPS 250W HPS
400HPS 400W HPS
250W PMH
320W PMH
350W PMH
400W PMH
Voltages
Voltages
120
208
240
277
347
480
85IF 85W IF8
165IF 165W IF8
120
208
240
277
347
480
120V
208V7
240V7
277V
347V
480V
Junction box in wall must provide adequate fixture support.
Use only in high-vandalism situations. Useful life is limited
by UV discoloration from sunlight and metal halide lamps.
Recommended for clear lamps only. Not for use with Type V
light distributions.
For use with all fixtures with convex glass lens. Not for use
with Type V light distributions.
Only available wth Type IV reflectors.
6
7
8
120V
208V7
240V7
277V
120V
SVSF-2B
SVSF-2L
SVSF-3T
SVSF-4C
208V7
240V7
277V
347V
480V
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
HORIZONTAL
HSF for Pole Davit Arm
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
IF = Induction Fluorescent
Required only for vandal protection in locations
where fixtures can be reached by unauthorized
persons.
Constant wattage isolated ballast is required on all
208V and 240V Canadian orders.
85W and 165W IF available in type III distribution only.
2 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1A 1 fixture side mt.
Voltages
120
208
240
277
2 fixtures side mt. 180°
NOTE: Due to the Energy Independence and Security Act
(EISA) of 2007, Kim Lighting can no longer supply probe
start Metal Halide ballasts with its luminaires, effective
January 1, 2009. Contact Kim Lighting for availability
of replacement ballasts for warranty service claims.
(Visit www.aboutlightingcontrols.org or the Library of
Congress website for more details).
THE ARCHETYPE LARGE
22K"
8"
(203 mm)
8"
(203 mm)
(559 mm)
6"
(152 mm)
2"
16"
(406 mm)
(51 mm)
Arm
cross-section
717
The Archetype LED
®
Small SAR LED
FEATURES
S I T E / R OA D WAY
SAR LED
•
Efficient, effective downward control of light with full uplight cutoff
•
IES Type II, III, IV, V, and One-Way L or R distribution patterns
•
Easy-access, tool-less latches for lower maintenance
•
LED models incorporating patent pending LED MicroEmitter technology
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING INFORMATION (Example)
1SA
SAR3
MOUNTING
1SA 1 Arm Side Mt.
2SB 2 Arm Side Mt.
2SL 2 Arm Side Mt.
3ST 3 Arm Side Mt.
3SY1 3 Arm Side Mt.
4SC 4 Arm Side Mt.
1W2 Single Wall Mt.
60L5K120
EPA
0.7
1.4
1.2
1.9
1.9
2.5
—
SG
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray™
PS Platinum Silver
WH White
CC Custom Color*
FIXTURE OPTIONS
A-30 120 Volt photocell
A-30 120 Volt photocell
A-31 208 Volt photocell
A-32 240 Volt photocell
A-33 277 Volt photocell
A-34 480 Volt photocell
A-35 347 Volt Photocell
CGL Convex Glass Lens
LS Polycarbonate Lens
TL Tamper Resistant Latch5
AF Air Filter
WIH-IM In-Fixture wireless
*Consult representative
NOTE: EPA is for Fixture only
VSF-1SA
A-30
control module,
PSG8 pg. 381.
FIXTURE
ELECTRICAL MODULE
SAR - Horizontal
Type II Full Cutoff
SAR2
SAR3
SAR4
SAR5
SARR
SARL
1
2
3
4
5
Type III Full Cutoff
Type IV Full Cutoff
Type V Full Cutoff
Type R Full Cutoff
Type L Full Cutoff
SAR Small Electronic LED, 60 LEDs, 73W
Source
Color Temperature3 Voltages
L3K 3500K
120 120V
60 60 LEDs
L5K 5100K
208 208V
L2K Amber
240 240V
277 277V
L3K = 3500 Kelvin LED
347 347V4
L5K = 5100 Kelvin LED
480 480V4
L2K = 580 nm Amber LED
3Y only available on round slipfitter.
Junction box in wall must provide adequate fixture
support.
4300K and 6500K are also available on an “Engineered
to Order” basis.
Due to current unavailability of 347V and 480V drivers,
specification of these voltages may feature an integral
step-down transformer.
Required only for vandal protection in locations where
fixtures can be reached by unauthorized persons.
THE ARCHETYPE SMALL
5"
17B"
(127 mm)
(432 mm)
6"
4J" (102 mm)
(152 mm)
1L"
17B"
(432 mm)
718
(25 mm)
Arm
cross-section
12"
(305 mm)
PRA12-5125SA/SG
POLE / POLE ARM
See p. 766-770 for ordering
no., pole and arm EPA.
SLIPFITTER MOUNTING OPTIONS
VERTICAL
4” Round, Standard Fixtures
VSF-1SA 1 fixture side mt.
VSF-2SB
VSF-2SL
VSF-3ST
VSF-3SY
VSF-4SC
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1SA 1 fixture side mt.
SVSF-2SB
SVSF-2SL
SVSF-3ST
SVSF-4SC
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
HORIZONTAL
HSF for Pole Davit Arm
The Archetype LED
®
Large AR LED
FEATURES
AR LED
Efficient, effective downward control of light with full uplight cutoff
•
IES Type II, III, IV, V, and One-Way L or R distribution patterns
•
Easy-access, tool-less latches for lower maintenance
•
LED models incorporating patent pending LED MicroEmitter technology
S I T E / R OA D WAY
•
Features exclusive wiHUBB technology
•
Wireless system for 0-10VDC full range dimming control
•
Programmable autonomous operation
ORDERING INFORMATION (Example)
1A
AR2
MOUNTING
1A 1 Arm Side Mt.
2B 2 Arm Side Mt.
2L 2 Arm Side Mt.
3T 3 Arm Side Mt.
3Y1 3 Arm Side Mt.
4C 4 Arm Side Mt.
1W Single Wall Mt.2
120L5K208
EPA
1.2
2.4
2.0
3.2
3.2
3.9
—
NOTE: EPA is for Fixture only
FIXTURE
AR - Horizontal
AR2 Type II Full Cutoff
AR3
AR4
AR5
ARR
ARL
Type III Full Cutoff
Type IV Full Cutoff
Type V Full Cutoff
Type R Full Cutoff
Type L Full Cutoff
SG
FIXTURE FINISH
BL Black
DB Dark Bronze
LG Light Gray
SG Stealth Gray™
PS Platinum Silver
WH White
CC Custom Color*
*Consult representative
A-25
VSF-1A
FIXTURE OPTIONS
A-25 Photocell Receptacle
CGL Convex Glass Lens
LS Polycarbonate Lens
TL Tamper Resistant Latch4
TB Terminal Block
AF Air Filter
WIH-IM In-Fixture wireless
control module,
PSG8 pg. 381.
PRA20-5125A/SG
POLE
See p. 766-770 for ordering
no., pole and arm EPA.
SLIPFITTER MOUNTING OPTIONS
VERTICAL
4” Round, Standard Fixtures
VSF-1A 1 fixture side mt.
VSF-2B
VSF-2L
VSF-3T
VSF-3Y
VSF-4C
ELECTRICAL MODULE
AR Large Electronic LED, 120 LEDs, 140W
Source
Color Temperature 3 Voltages
L3K 3500K
120 120V
120 120 LEDs
L5K 5100K
208 208V
L2K Amber
240 240V
277 277V
L3K = 3500 Kelvin LED
347 347V4
L5K = 5100 Kelvin LED
480 480V4
L2K = 580 nm Amber LED
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
3 fixtures side mt. 120°
4 fixtures side mt. 90°
4” Square, Standard Fixtures
SVSF-1A 1 fixture side mt.
SVSF-2B
SVSF-2L
SVSF-3T
SVSF-4C
2 fixtures side mt. 180°
2 fixtures side mt. 90°
3 fixtures side mt. 90°
4 fixtures side mt. 90°
HORIZONTAL
HSF for Pole Davit Arm
1
2
3
4
3Y only available on round slipfitter.
Junction box in wall must provide adequate fixture
support.
4300K and 6500K are also available on an “Engineered
to Order” basis.
Required only for vandal protection in locations where
fixtures can be reached by unauthorized persons.
THE ARCHETYPE LARGE
22K"
8"
(203 mm)
8"
(203 mm)
(559 mm)
6"
(152 mm)
2"
16"
(406 mm)
(51 mm)
Arm
cross-section
719