Referencias
[1] Mohan, Undeland, Robbins “Power Electronics: Converters, Applications and design”, Third
Edition, John Wiley & Sons, 2003.
[2] Bimal K. Bose, “Modern Power Electronics and AC Drives”, Prentice Hall PTR, 2002.
[3] “Discovering the key to the matrix converter” in
http://www.yaskawa.de/press/press/press_yas061A.html
[4] P. W. Wheeler, J. Rodriguez, J. C. Clare, L. Empringham and A. Weinstein, “Matrix
Converters: A Technology Review”, IEEE Trans. Industrial Electronics, vol. 49, no. 2, pp.
276–287, Aug. 2002.
[5] C. Klumpner, P.Nielsen, I. Boldea and F. Blaabjerg, “A New Matrix Converter Motor (MCM)
for Industry Application”, IEEE Trans. Industrial Electronics, vol. 49, no. 2, pp. 325-335, Aug.
2002.
[6] — , “New Solutions for a Low-Cost Power Electronic Building Block for Matrix Converters” ,
IEEE Trans. Industrial Electronics, vol. 49, no. 2, pp. 336–344, Apr. 2002.
[7] K. G. Kerris, P. W. Wheeler, J. C. Clare and L. Empringham, “Implementation of a matrix
Converter Using P-Channel Mos-Controlled Thyristors”, in Proc.Power Electronics and
Variable Speed Drives Conf. UK , pp. 35-39, IEE 2000.
[8] O. Simon, J. Mahlein, M. N. Muenzer and M. Bruckmann, “Modern Solutions for Industrial
Matrix-Converter Applications” , IEEE Trans. Industrial Electronics, vol. 49, no. 2, pp. 401–
406, Apr. 2002.
[9] “EconoMAC the first all-in-one IGBT module for matrix converters” , Eupec: Hr. M. Hornkamp;
Hr. M. Loddenkötter; Hr. M. Münzer; Siemens A&D: Hr. O. Simon ; Hr. M. Bruckmann in
http://www.eupec.com/gb/2_PRODUCTS/2_6_Editorials/pdf/ed_economac.pdf
[10] P. W. Wheeler, J. C. Clare, L. Empringham, M. Apap and M. Bland, “Matrix Converters”,
Power Engineering Journal, vol. 16, no. 6, pp. 273-282, Dec. 2002.
[11] A. Alesina, and M. Venturini, “Intrinsic Amplitude Limits and Optimum Design of 9-Switches
Direct PWM AC-AC Converters”, in Proc. 1988 IEEE Power Electronics Specialists Conf., pp.
1284-1291, 1988.
[12] —, “Analysis and Design of Optimum Amplitude Nine-Switch Direct AC-AC Converters”, IEEE
Transaction on Power Electronics, Vol. 4, No. 1, pp. 101-112, 1989.
[13] L. Huber and D. Borojevic, “Space Vector Modulated Three-Phase to Three-Phase Matrix
Converter with Input Power Factor Correction”, IEEE Trans. Industry Applications, vol. 31, no.
6, pp. 1234–1246, Nov/Dec. 1995.
[14] D. Casedi, G. Serra, A.Tani and L. Zarri, “A Novel Modulation Strategy For Matrix Converters
with Reduced Switching Frequency Based on Output Current Sensing”, in Proc. 2004 IEEE
Power Electronics Specialists Conf. Aachen, Germany, pp. 2373-2380, 2004.
[15] “Excellence in Technology Award” in
http://www.yaskawa.com/site/dmdrive.nsf/(DocID)/MWIN62GTYD/$File/PR.FrostSullivan2004.pdf
[16] “IGBT Bi-Directional Switch Module” in
http://www.dynexsemi.com/assets/DNX_DIM400PBM17-A000.pdf
[17] “Bidirectional IGBT switches enable the matrix“ in
http://www.electronicstalk.com/news/dyn/dyn108.html
[18] P. W. Wheeler, J. C. Clare, L. Empringham, M. Bland and M. Apap, “Gate Drive Level
Intelligence and Current Sensing for Matrix Converter Current Commutation” , IEEE Trans.
Industrial Electronics, vol. 49, no. 2, pp. 382–389, Apr. 2002.
[19] L. Helle, K. B. Larsen, A. H. Jorgensen and S. Munk-Nielsen, “Evaluation of Modulation
Schemes for Three-Phase to Three-Phase Matrix Converters”, IEEE Trans. Industrial
Electronics, vol. 51, no. 1, pp. 158–171, Feb. 2004.
85
[20] D. Casedi, G. Serra, A.Tani and L. Zarri, “Matrix Converter Modulation Strategies: A New
General Approach Based on Space-Vector Representation of the Switch State”, IEEE Trans.
Industrial Electronics, vol. 49, no. 2, pp. 370–381, April 2002.
[21] D. Casadei, G. Serra, A. Tani, P. Nielsen, "Performance of SVM controlled Matrix Converter
With Input and Output Unbalanced Conditions", Proceedings of EPE'95, Vol. 2, pp. 2.6282.633, 1995.
[22] J. Mahlein, M.Brucmann and M.Braun,”Passive Protection Strategy for a drive System With a
Matrix Converter and an Induction Machine”, IEEE Trans. Industrial Electronics, vol. 49, no.
2, pp. 297-303, Aug. 2002.
[23] Peter Nielsen, Frede Blaabjerg and John K. Pedersen, “New Protection Issues of a Matrix
Converter: Design Considerations for Adjustable-Speed Drives”, IEEE Trans. Industry
Applications, vol. 35, no. 5, pp. 1150–1161, Sep/Oct. 1999.
[24] S. Bernet, S.Ponnaluri and R.Teichmann, “Design and Loss Comparison of a Matrix
Converter and Voltage-Source Converters for Modern AC Drives”, IEEE Trans. Industrial
Electronics, vol. 49, no. 2, pp. 304-314, Aug. 2002.
[25] A. Ishiguro, T. Furuhashi and S. Okuma, “A novel Control Method for Forced Commutated
Cycloconverter Using Instantaneous Values of Input Line-to-Line Voltages”, IEEE Trans. Ind.
Electron., vol. 38, no. 3, pp. 166–172, Jun. 1991.
[26] C. Klumpner, F. Blaabjerg and P. Nielsen, “Seeding-up the Maturation Process of the Matrix
Converter Technology”, Proc. 2001 IEEE Power Electronics Specialists Conf. Vancouver,
Canada, Vol. 2, pp. 1083-1088, 2001.
[27] J. Rodriguez, E.Silva, R. Burgos and F. Blaabjerg, “Modeling, Analysis and Simulation of
Matrix Converters”. Applications, vol. IA-21, no. 6, pp. 1337–1342, Nov/Dec. 1985.
[28] P. D. Ziogas, S. I. Khan and M. H. Rashid, “Some Improved Forced Commutated
Cycloconverter Structures”, IEEE Trans. Industry Applications, vol. IA-21, no. 5, pp. 1242–
1253, Sep. 1985.
[29] —, “Analysis and Design of Forced Commutated Cycloconverter Structures with Improved
Transfer Characteristics”, IEEE Trans. Ind. Electron., vol. IE-33, no. 3, pp. 271-280, Aug.
1986.
[30] Xiaoliang Ma, “High-Performance PWM Frequency Changers”, IEEE Trans. Industry
Applications, vol. IA-22, no. 2, pp. 267-280 , Mar/Apr. 1986.
[31] Joachim Holtz and Ulrich Boelkens, “Direct Frequency Converter with Sinusoidal Line
Currents for Speed-Variable AC Motors”, IEEE Trans. Ind. Electron., vol. 36, no. 4, pp. 475–
479, Nov. 1989.
[32] R.R.Beasant, C.Beattic and A.Refsum, “An Approach to the Realization of a High Power
Venturini Converter”, in Proc. IEEE PESC’90, pp. 291-297, 1990
[33] C. L. Neft and C. D. Shauder, “Theory and Design of a 30-hp Matrix Converter”, IEEE Trans.
Industrial Electronics, vol. 28, no. 3, pp. 546–551, May/Jun. 1992.
[34] P. Tenti, L. Malesani and L. Rossetto, “Optimum Control of N-input K-output Matrix
Converters”, IEEE Trans. Power Electron., vol. 7, pp. 707-713, Oct., 1992.
[35] Sedat Sunter and J.C.Clare, “A true Quadrant Matrix Converter Induction Motor Drive with
Servo Performance”, in Proc. 1998 IEEE Power Electronics Specialists Conf., pp. 146-151,
1996.
[36] L. Empringham, P. W. Wheeler and J. C. Clare, “Intelligent Commutation of Matrix Converter
Bi-directional switch using Novel Gate Drive Techniques”, in Proc. 1998 IEEE Power
Electronics Specialists Conf., Japan, 1998.
[37] Domenico Casedi, Giovanni Serra and Angelo Tani, “A General Approach for the Analysis of
the Input Power Quality in Matrix Converters”, IEEE Trans. Power Electronics, vol.13, no.5,
pp.882-891, Sep. 1998.
[38] Jang Hyoun Youm and Bong Hwan Kwon, “Switvhing Technique for Current-Controlled ACto-AC Converters”, IEEE Trans. Industrial Electronics, vol. 46, no. 2, pp. 309-318, Apr. 1999.
[39] J. C. Clare and L. Empringham and P. W. Wheeler, “The Effects of Sampling Delays and
Non-Ideal Filtering on the Performance of Matrix Converter Modulation Algorithms”, in
Proc.Power Electronics and Variable Speed Drives Conf. UK, pp. 29-35, IEE 2000.
86
[40] F. Blaabjerg, D. Casadei, C. Klumpner and M.Matteini, ”Comparison of Two Current
Modulation Strategies for Matrix Converters Under Unbalanced Input Voltage Condition”,
IEEE Trans. Industrial Electronics, vol. 49, no. 2, pp. 289-296, Apr. 2002.
[41] C. Klumpner and F. Blaabjerg, “Experimental Evaluation of Ride-Through Capabilities for a
Matrix Converter Under Short Power Interruptions” , IEEE Trans. Industrial Electronics, vol.
49, no. 2, pp. 315–324, Apr. 2002.
[42] J. Chang, T.Sun and A.Wang, “Highly Compact AC-AC Converter Achieving a High Voltage
Transfer Ratio”, IEEE Trans. Industrial Electronics, vol. 49, no. 2, pp. 345-352, Aug. 2002.
[43] R. Teichmann and J. Oyama, “ARCP Soft-Switching Technique in Matrix Converters”, IEEE
Trans. Industrial Electronics, vol. 49, no. 2, pp. 353-361, Aug. 2002.
[44] P. Mutschler and M.Marcks, “A Direct Control Method for Matrix Converters”, IEEE Trans.
Industrial Electronics, vol. 49, no. 2, pp. 362-369, Aug. 2002.
[45] D. Casedi, G. Serra, A.Tani and L. Zarri, “Matrix Converter Modulation Strategies: A New
General Approach Based on Space-Vector Representation of the Switch State”, IEEE Trans.
Industrial Electronics, vol. 49, no. 2, pp. 370–381, April 2002.
[46] E. P. Wiechmann, R. P. Burgos and J. Rodríguez, “Continuously Motor-Synchronized RideThrough Capability for Matrix-Converter Adjustable-Speed Drives” , IEEE Trans. Industrial
Electronics, vol. 49, no. 2, pp. 390–400, Apr. 2002.
[47] J. Mahlein, J. Igney, J. Weigold, M. Braun and O. Simon, “Matrix Converter Commutation
Strategies With and Without Explicit Input Voltage Sign Measurement” , IEEE Trans.
Industrial Electronics, vol. 49, no. 2, pp. 407–414, Apr. 2002.
[48] Der Fa Chen and Tian Hua Liu, “Optimal Controller Design for a Matrix Converter Based
Surface Mounted PMSM Drive System”, IEEE Trans. Power Electronics, vol.18, no.4,
pp.1034-, Jul. 2003.
[49] P. W. Wheeler, J. C. Clare and Lee Empringham, “Enhancement of Matrix Converter Output
Waveform Quality Using Minimized Commutation Times”, IEEE Trans. Industrial Electronics,
vol. 51, no. 1, pp. 240–244, Feb. 2004.
[50] C.Watthanasarn, L.Zhang and W. Liang,” Analysis and DSP-based Implementation of
Modulation Algorithms for AC-AC Matrix Converters”, 1996
[51] http://www.iet.auc.dk/~ck/matrix/
[52] http://www.eee.nottingham.ac.uk/pemc/matrix/
[53] http://www.houston-associates.com/vpo/virtualpo/yaskawa/press_yas061.htm
[54] http://www.microchip.com/
87