WP-AC Belt Power - Belt Driven 230V Generator marine • mobile 3.5 kW - 5 kW - 230 VAC/50 Hz - Heavy-duty system to generate 230 VAC/50 Hz - Stable, sine wave power at variable speed - Compact & easy to install - High efficient & compact generator solution - Suitable to operate with Combi’s s m art e n e rg y so lu tio n s Datasheet s m a rt e n e rg y s o lu t io n s Beltpower Art. Nr. 4130100041302000 Specifications W-BD 3.5 W-BD 5 Power (continuous) 3500 W 5000 W Max current (continuously) 16 A 27 A Max. inrush current (320 ms) 32 A 40 A Voltage 230 VAC 230 VAC Frequency 50 Hz 50 Hz How it works The WhisperPower W-BD alternator is designed for installation in the vehicle’s or boat’s engine compartment and has to be driven by a belt of one of the engine’s pulley. In most cases an additional pulley has to be installed. The alternator’s output is connected to an inverter/power supply, which converts the variable incoming current into a stable sine wave 230 VAC 50 Hz. Standard Pulleys and Pulleys to client specification Inverter box Dimensions (h*w*d) 376*323*127 mm (app.) Net weight 9.6 Kg 9.6 Kg Efficiency 95% 95% Depending on the vehicle model, mounting brackets to mount the generator on the engine could be available or can be specially designed Generator Pulley Safety alarms Net weight 6.9 Kg Dimensions (h*w*d) 159*178*190 mm Short circuit, overload, over temperature, low/ high rpm, low/high voltage Voltage 200-340 VAC 3 phase Determine the pulley diameter design Field voltage 14.4 VDC 6.9 Kg The graphs show the available AC power corresponding to the generator speed. The speed of 2 pulleys relate to each other proportional to the diameter of the pulleys. First one need to know the engine speed = 116*79*19 mmcrankshaft speed when idling and at full speed. When the drive pulley is not on the crankshaft the rpm of the pulley drive shaft must be determined. The pulleys should be selected in such a way that at low speed the generator can bring the power required. However the max. speed must not exceed 15000 RPM. 3600 14.4 VDC 3400 3200 3000 2800 2600 Remote Control Panel 2400 WATT 2200 Dimensions (h*w*d) 2000 1800 1600 1400 1200 1000 800 600 400 200 0 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 RPM 3400 4800 3200 3000 4400 2800 4000 2600 3600 2200 3200 2000 2800 WATT WATT 2400 1800 1600 1400 2400 2000 1200 1600 1000 1200 800 600 800 400 400 200 0 2000 Attention! 5200 3600 2500 3000 3500 4000 4500 5000 5500 6000 6500 RPM Speed/power diagram W-BD 3.5 (3.5 kW) 7000 0 2000 2500 3000 3500 4000 4500 5000 5500 6000 RPM 6500 Speed/power diagram W-BD 5 (5 kW) 5200 7000 7500 8000 8500 9000 T he W-BD5 model needs 6500 RPM to generate 5 kW. Compared with the W-BD 3.5 the 5 kW model will also need more RPM (3200) to generate 1 kW. Refer to the graph. Remote panel for Belt Power, with various settings 4800 4400 4000 3600 WATT 3200 2800 2400 2000 1600 1200 800 400 2500 3000 3500 4000 4500 5000 5500 6000 RPM 6500 7000 7500 8000 8500 9000 WhisperPower BV Kelvinlaan 82, 9207 JB Drachten, The Netherlands, Tel: +31 (0) 512 571 550, Fax: +31 (0) 512 571 599, info@whisperpower.com, www.whisperpower.com 28092012datasheetBELTp 0 2000 Installation drawing w-bd generator