TQS5200
802.11a/b/g Single/Dual-band SPDT Switch
Applications
•
•
•
•
•
•
802.11a WLAN
802.11b WLAN
802.11g WLAN
WiMAX
TX-RX Switching
Antenna Diversity Switching
SLIM-7
1.3x2.0x0.4mm
Pb-Free
6-pin 1.3 x 2.0 x 0.4 mm SLP Package
Product Features
Functional Block Diagram
• Integrated SPDT Switch for Single-band and Dualband 802.11a/b/g WLAN Systems
• Broadband: 1 – 6 GHz
• Low Insertion Loss: 0.6 dB at 2.5 GHz
• High Isolation: +28 dB at 2.5 GHz
• CMOS Compatible Dual Voltage Control
• GaAs PHEMT Technology
• Lead Free, RoHS Compliant SMT Package
OUT1
1
6
2
5
CTRL1
GND
OUT2
General Description
7
3
4
RFC
CTRL2
Pin Configuration
The TQS5200 is a high power, single-pole double-throw
switch configured for TX-RX or Antenna Diversity
switching applications for the WLAN market. The device
exhibits industry-leading insertion loss, isolation and
power handling.
The TQS5200 requires no fixed supply voltage and
operates with a positive control voltage. The switch is
manufactured using TriQuint’s GaAs pHEMT process
and is packaged in an ultra-small, low-profile 1.3 mm x
2 mm x 0.4 mm SLIM-7 Pb-free package.
Pin No.
Symbol
1
2
3
4
5
6
Backside Pad
OUT1
GND
OUT2
VCTRL2
RFC
VCTRL1
RF/DC GND
Ordering Information
Part No.
TQS5200
TQS5200-PCB
Description
SPDT Reflective Switch
1 – 6 GHz Evaluation Board
Standard T/R size = 2500 pieces on a 7” reel
Datasheet: Rev. B 07-30-14
© 2014 TriQuint
- 1 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com
TQS5200
802.11a/b/g Single/Dual-band SPDT Switch
Absolute Maximum Ratings
Parameter
Recommended Operating Conditions
Rating
Control Voltage (VCTRL1, VCTRL2)
RF Input Power, CW, 50 Ω, T = 25 °C
Junction Temperature, TJ
−5.0 to +5.0 V
3W
Storage Temperature
−40 to 150 °C
50 °C
Pin=+30 dBm, Baseplate Temp.=+25 °C
Parameter
V1, V2 High State
Operating Temp. Range
Min Typ Max Units
+2.5
−40
+5.0
+85
V
°C
Electrical specifications are measured at specified test
conditions. Specifications are not guaranteed over all
recommended operating conditions.
Operation of this device outside the parameter ranges
given above may cause permanent damage.
Electrical Specifications
Test conditions unless otherwise noted: VCTRL1, VCTRL2 = +3 V / 0 V, Temp=25°C, 50 Ω system
Parameter
Frequency Range
Insertion Loss
Isolation
Return Loss
Conditions
Input P1dB
Harmonics
Datasheet: Rev. B 07-30-14
© 2014 TriQuint
23
12.5
0.6
28
15
Max
2500
0.8
Min
Typ
23
12.5
0.8
28
15
4900
Max
6000
1.0
Units
MHz
dB
dB
dB
+29
dBm
2fo, Pin=+20dBm
+85
+80
dBc
3fo, Pin=+20dBm
+70
1
+70
1
dBc
uA
Digital Control Voltages
Low
High
Typ
+31.5
Gate Leakage
State
Min
2400
Bias Condition
≤ +0.2 V
≥ +2.5 V
50
50
Switch Control Truth Table
Control Voltages
VCTRL1 VCTRL2
High
Low
- 2 of 7 -
Low
High
Signal Path State
RFC to RF1
RFC to RF2
On (Insertion Loss)
Off (isolation)
Off (isolation)
On (Insertion Loss)
Disclaimer: Subject to change without notice
www.triquint.com
TQS5200
802.11a/b/g Single/Dual-band SPDT Switch
TQS5200-PCB Evaluation Board
J6 GND
J5
VCTRL1
J5
J6
CTRL1
C2
J1
RF2
C3
U1
C1
J2
J4
RF1
CTRL2
U1
100 pF
C2
1
6
2
5
3
4
100 pF
J7
C5
C4
C1
RF
Input
Backside
Paddle
C3
J3
100 pF
RFC
J4
VCTRL2
C4
C5
100 pF
100 pF
J8
RF
Output
PCB Loss Calibration Line
TriQuint PCB 1094172 Material and Stack-up
1 oz. Cu top layer
0.014"
Notes:
1. J7 to J8 thru line may be used to de-embed PCB losses to device.
Nelco N-4000-13
1 oz. Cu inner layer
0.062" ± 0.006"
Finished Board
Thickness
Core
1 oz. Cu inner layer
0.014"
Nelco N-4000-13
1 oz. Cu bottom layer
50 ohm line dimensions: Width = .021”
Spacing = .006”
Datasheet: Rev. B 07-30-14
© 2014 TriQuint
- 3 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com
TQS5200
802.11a/b/g Single/Dual-band SPDT Switch
Performance Plots
Test conditions unless otherwise noted: VCTRL1=+3 V, VCTRL2=0 V, Freq.=2.5 GHz, Temp=+25 °C, 50 Ω system
Insertion Loss
0
-0.2
-0.4
-0.6
-0.8
-1
-1.2
-1.4
-1.6
-1.8
-2
RFC-OUT1
RFC-OUT2
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
Isolation
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
6
Isolation
0
0.5
1
1.5
2
Frequency (GHz)
2.5
3
3.5
4
4.5
5
5.5
6
Frequency (GHz)
Return Loss
0
-5
-10
Return Loss
-15
-20
-25
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
IL fo= 2.5GHz (dB)
Frequency (GHz)
00.00
-00.20
-00.40
-00.60
-00.80
-01.00
-01.20
-01.40
-01.60
-01.80
-02.00
Insertion Loss Over Input Power
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Input Pow er (dBm )
nd
rd
3 Harmonic over Input Power
100.00
90.00
80.00
70.00
60.00
50.00
40.00
30.00
20.00
10.00
00.00
3fo fo= 2.5GHz (dBc)
2fo fo= 2.5GHz (dBc)
2 Harmonic over Input Power
100.00
90.00
80.00
70.00
60.00
50.00
40.00
30.00
20.00
10.00
00.00
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Input Pow er (dBm )
Input Pow er (dBm )
Datasheet: Rev. B 07-30-14
© 2014 TriQuint
- 4 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com
TQS5200
802.11a/b/g Single/Dual-band SPDT Switch
Pin Configuration and Description
OUT1
1
6
2
5
GND
OUT2
Pin No.
7
3
4
CTRL1
RFC
CTRL2
Symbol
Description
2
GND
RF/DC Ground
3
OUT2
RF output 2, DC voltage present, DC block required.
4
VCTRL2
Control Voltage 2
5
RFC
6
VCTRL1
1
Backside Pad
Datasheet: Rev. B 07-30-14
© 2014 TriQuint
OUT1
RF/DC GND
RF output 1, DC voltage present, DC block required.
Antenna Input, DC voltage present, DC block required.
Control Voltage 1
RF/DC Ground. Use recommended via pattern and ensure good solder
attach for best thermal and electrical performance.
- 5 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com
TQS5200
802.11a/b/g Single/Dual-band SPDT Switch
Mechanical Information
Package Marking and Dimensions
Marking: Assembly Code - XXXXX
XXXX
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012
Datasheet: Rev. B 07-30-14
© 2014 TriQuint
- 6 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com
TQS5200
802.11a/b/g Single/Dual-band SPDT Switch
Product Compliance Information
ESD Sensitivity Ratings
Solderability
Compatible with both lead-free (260°C max. reflow
temperature) and tin/lead (245°C max. reflow
temperature) soldering processes.
Caution! ESD-Sensitive Device
ESD Rating:
Value:
Test:
Standard:
Class 1A
≥ 250 V to < 500 V
Human Body Model (HBM)
ESDA/JEDEC Standard JS-001-2012
RoHs Compliance
ESD Rating:
Value:
Test:
Standard:
Class C3
≥ 1000 V
Charged Device Model (CDM)
JEDEC Standard JESD22-C101F
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
Important Notice
For the latest specifications, additional product information, worldwide sales and distribution locations, and information
about TriQuint:
Web:
www.triquint.com
Tel:
+1.503.615.9000
Email: info-sales@triquint.com
Fax:
+1.503.615.8902
For technical questions and application information:
Email: sjcapplications.engineering@triquint.com
Contact Information
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information
contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The
information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with
such information is entirely with the user. All information contained herein is subject to change without notice.
Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The
information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or
anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Datasheet: Rev. B 07-30-14
© 2014 TriQuint
- 7 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com