Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
U.FL Series
Up to 6GHz Transmission Speed
Mated Height Comparison
(With E.FL series)
2.4(2.5Max)
1.9(2.0Max)
U.FL-LP(V)-040
E.FL-LP-040
E.FL-LP-066
3(3.2Max)
U.FL-LP-040
U.FL-LP-066
U.FL
■Features
E.FL
●Space Factor of Mated Connector
1.Extremely Small Occupied Mounting Area
Reduced board space requirement by 18% to 7.7mm2, when
compared with Hirose’s E.FL connectors.
Plug
Dia.0.81
2.5Max
2.Light Weight
One of the world’s lightest coaxial connectors.
Receptacle: 15.7mg
3.Frequencies of Up to 6GHz
U.FL-R-SMT
Receptacle
To meet the frequency requirements of a wide variety of
miniature equipment, these connectors offer high frequency
performance from DC to 6 GHz.
Supplied on tape-and-reel packaging.
Cable
Plug
Dia.1.32
Dia.1.13
5.Use of Ultra-fine Teflon Cable
U.FL-R-SMT
Receptacle
®
NEW
6. Simple Disconnection
7.User Friendly Mating Operation
Plug
2.0Max
Dedicated tool allows reliable un-mating of the plug.
Cable
U.FL-R-SMT
Receptacle
NEW
Plug
U.FL-LP-062
Cable
Dia.1.00
2.4Max
Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS,
electronic measuring instruments, etc.
U.FL-LP(V)-040
Dia.0.81
Tactile lock feeling ensures and confirms reliable connection.
■Applications
U.FL-LP-066
2.5Max
4.Board Placement with Automatic Equipment
Several of ultra-fine single and double shielded Teflon
coaxial cables terminate to U.FL plug.
Cable
U.FL-LP-040
U.FL-R-SMT
Receptacle
NEW
U.FL-LP-088
Cable
2.4Max
Plug
*Teflon is a registered trademark of DuPont.
Dia.1.37
U.FL-R-SMT
Receptacle
2004.2
1
■ Product Specifications
50 ohms
60 V AC (rms)
DC to 6 GHz
Nominal characteristic impedance
Voltage rating
Frequency range
Ratings
Item
1. Contact resistance
Operating temperature range
Operating humidity
Specification
Conditions
Center: 20 m ohms max.
10 mA max.
Outside: 10 m ohms max.
2. Insulation resistance
500 M ohms min.
3. Withstanding voltage
No flashover or insulation breakdown.
100 V DC
200 V AC / 1 minute
Part No.
Up to 3GHz
3 to 6GHz
U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly
1.3 Max
1.35 Max
U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly
1.3 Max
1.3 Max
U.FL-LP-068 dia.1.13mm Coaxial Cable Assembly
1.3 Max
1.4 Max
U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly
1.3 Max
1.5 Max
U.FL-LP-062 dia.1mm Coaxial Cable Assembly
1.3 Max
1.3 Max
1.3 Max
1.4 Max
4. V.S.W.R.*
U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly
5. Center contact holding force 0.15 N min.
6. Durability
-40˚C to +90˚C
90% max.
Measured with a Ø 0.475 pin gauge
Contact resistance
(mating/un-mating,
Center: 25 m ohms max.
with corresponding plug)
Outside: 15 m ohms max.
30 cycles
Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration
7. Vibration
No electrical discontinuity of 1µs min.
of 59m/s2, for 5 cycles in the direction of each of the 3 axis.
8. Shock
No damage, cracks or parts dislocation.
Acceleration of 735 m/s2, 11ms duration, sine half-wave
9. Humidity
No damage, cracks or parts dislocation.
waveform, 6 cycles in each of 3 axes.
(Steady state)
Insulation resistance 100 M ohms min.(when humidity high) 96 hours at temperature of 40ç and humidity of 95%.
Insulation resistance 500 M ohms min.(when dry)
10. Temperature cycle
No damage, cracks or parts dislocation.
Temperature:-40˚C/+5 to +35˚C/+90˚C/+5 to +35˚C
Contact resistance:25 m ohms max. (Center)
Time:
15 m ohms max. (Outside)
11. Salt spray test
30
/ 5 max.
/30
/5 max.(Minutes)
5 cycles
5% salt water solution, 48 hours
No excessive corrosion
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement connection shown below.
Note 1: Cable type connectors were measured with SMA conversion adapters
attached to both ends of the harness product of a suitable 100cm cable.
Note 2: Board type connectors were mounted to a 50Ω glass epoxy board and
measurements were conducted with SMA conversion adapters attached.
■Material/Finishes
Part
Material
Finish
Remarks
Shell
Phosphor bronze
Silver plated
—————
Male center contact
Brass
Gold plated
—————
Female center contact
Phosphor bronze
Gold plated
—————
Insulator
2
Plug
PBT
Color: Black
UL94V-0
Receptacle
LCP
Color: Beige
UL94V-0
■Receptacles
Cut Out Prohibition Area
GND
4±0.05
1.9±0.05
GND
SIG
1.05±0.05
2.2±0.05
1.2Max(Note 3)
1.25
0.35
2.6
1.8
(3.1)
Note 1: Receptacles of (01) specification are sold by the
bag with 100 pieces per bag.
Please order in pack units.
Note 2: Receptacles of (10) specification are sold by the
reel (which contains 2,500 pieces).
Please order in reel units.
Note 3: This area may be covered by insulating material.
3
2.6
0.6
1±0.05
GND
Ø2
GND
SIG
1±0.05
Recommended PCB mounting pattern
Weight (mg)
Packaging
Part No.
CL No.
U.FL-R-SMT(01)
331-0471-0-01
Bag packaging (100 pieces/bag)
U.FL-R-SMT(10)
331-0471-0-10
Reel packaging (2500 pieces/reel)
15.7/unit
●Packaging Specifications
2±0.1
4±0.1
0.3
Center contact
5.5±0.1
1
0.
+ 0
.5
8±0.1
1.6
Unreeling direction
Reel Dimensions
1.8
14
Ø13
Ø21
Ø330±2
12±0.3
Ø1
1.75±0.1
Embossed Carrier Tape Dimensions
3
■Cable Assembly (Plug)
U.FL-LP-062
3
Part No.
Mated Height
4
1.8
1.5
5
1.85
3.4
4
1.93
1.93
4
U.FL-LP-088
2.8
U.FL-LP(V)-040
2.8
U.FL-LP-066
3
3
U.FL-LP-040
2.5mm Max.
2.5mm Max.
2.0mm Max.
2.4mm Max.
2.4mm Max.
(2.4mm Nom.)
(2.4mm Nom.)
(1.9mm Nom.)
(2.3mm Nom.)
(2.3mm Nom.)
Applicable
Dia. 0.81mm
cable
Coaxial cable
Weight (mg)
53.7
Dia. 1.13mm and
Dia. 1.32mm
Coaxial cable
59.1
Dia. 0.81mm
Dia. 1mm
Dia. 1.37mm
Coaxial cable
Coaxial cable
Coaxial cable
34.8
45.5
71.7
●Cable Guide
Description
Dia.0.81mm
Coaxial Cable
Dia.1.13mm
Coaxial Cable
Dia.1.32mm
Coaxial Cable
Dia.1mm
Coaxial Cable
Dia.1.37mm
Coaxial Cable
Cable
Type
04
068
066
062
088
Cable Specification
Inner
Conductor*
Dielectric
Diameter
7/0.05 SA
(AWG36)
7/0.08 SA
(AWG32)
7/0.08 SA
(AWG32)
Outer
Conductor*
Jacket
Diameter
Dia.0.40
Single
Dia.0.81
PFA
Shield SA
PFA
Dia.0.68
Single
Dia.1.13
FEP
Shield SA[TA]
FEP
Dia.0.66
Double
Dia.1.32
FEP
Shield TA
FEP
7/0.071 SA
Dia.0.62
Tape, single
Dia.1
(AWG33)
FEP
Shield TAT
FEP
7/0.102 SA
Dia.0.88
Single
Dia.1.37
(AWG30)
FEP
Shield TA
FEP
Nominal attenuation
Nominal
Impedance
At 3GHz
At 6GHz
50 ohms
6.45dB/m
9.42dB/m
3.43dB/m
5.13dB/m
[3.73dB/m]
[5.44dB/m]
50 ohms
3.8dB/m
5.6dB/m
50 ohms
3.1dB/m
4.4dB/m
50 ohms
2.8dB/m
4.3dB/m
50 ohms
(data as provided by cable suppliers, for reference only)
* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin
4
■How to Specify Plug Cable Assembly
Dimensions of U.FL Series assembly products should be made as indicated below.
Single-Ended Cable Assembly
Double-Ended Cable Assembly
L
L
●Total Standard Tolerance for Total Length of Cable Assembly
●Ordering Information
U.FL - [] LP - [] - A - (L)
1
2
3
4
1 Series name
U.FL
2 Assembly type
LP: Single ended
2LP: Double ended
3 Cable type
04 : Dia.0.81mm Coaxial Cable
068 : Dia.1.13mm Coaxial Cable
066 : Dia.1.32mm Coaxial Cable
062 : Dia.1 mm Coaxial Cable
088 : Dia.1.37mm Coaxial Cable
4 Total Length(mm)
Length is expressed in mm units.
Part No. of Plug
U.FL-LP-040
U.FL-LP-068
U.FL-LP-066
U.FL-LP(V)-040
U.FL-LP-062
U.FL-LP-088
Part No. of Cable Assembly
Total Length(mm)
00350<
=L<
=00200
Standard Tolerance (mm)
02000<L<
=00500
<
05000<L =01000
±08
10000<0L<
=1000
±1.5%
±04
±12
Note: Shortest length L is 35 mm.
Description
U.FL-2LP-04N1-A-(L)
Dia. 0.81mm double ended coaxial cable, color: white
U.FL-2LP-04N2-A-(L)
Dia. 0.81mm double ended coaxial cable, color: black
U.FL-LP-04N1-A-(L)
Dia. 0.81mm single ended coaxial cable, color: white
U.FL-LP-04N2-A-(L)
Dia. 0.81mm single ended coaxial cable, color: black
U.FL-2LP-068N1-A-(L)
Dia. 1.13mm double ended coaxial cable, color: gray
U.FL-2LP-068N2-A-(L)
Dia. 1.13mm double ended coaxial cable, color: black
U.FL-LP-068N1-A-(L)
Dia. 1.13mm single ended coaxial cable, color: gray
U.FL-LP-068N2-A-(L)
Dia. 1.13mm single ended coaxial cable, color: black
U.FL-2LP-066J1-A-(L)
Dia. 1.32mm double ended coaxial cable, color: gray
U.FL-2LP-066J2-A-(L)
Dia. 1.32mm double ended coaxial cable, color: black
U.FL-LP-066J1-A-(L)
Dia. 1.32mm single ended coaxial cable, color: gray
U.FL-LP-066J2-A-(L)
Dia. 1.32mm single ended coaxial cable, color: black
U.FL-2LP(V)-04N1-A-(L)
Dia. 0.81mm double ended coaxial cable, color: white
U.FL-2LP(V)-04N2-A-(L)
Dia. 0.81mm double ended coaxial cable, color: black
U.FL-LP(V)-04N1-A-(L)
Dia. 0.81mm single ended coaxial cable, color: white
U.FL-LP(V)-04N2-A-(L)
Dia. 0.81mm single ended coaxial cable, color: black
U.FL-2LP-062N1D-A-(L)
Dia. 1mm double ended coaxial cable, color: gray
U.FL-2LP-062N2D-A-(L)
Dia. 1mm double ended coaxial cable, color: black
U.FL-LP-062N1D-A-(L)
Dia. 1mm single ended coaxial cable, color: gray
U.FL-LP-062N2D-A-(L)
Dia. 1mm single ended coaxial cable, color: black
U.FL-2LP-088K1T-A-(L)
Dia. 1.37mm double ended coaxial cable, color: gray
U.FL-2LP-088K2T-A-(L)
Dia. 1.37mm double ended coaxial cable, color: black
U.FL-LP-088K1T-A-(L)
Dia. 1.37mm single ended coaxial cable, color: gray
U.FL-LP-088K2T-A-(L)
Dia. 1.37mm single ended coaxial cable, color: black
Please contact Hirose Sales Representative for cable length and cable end treatment.
5
■Conversion Adapters
●SMA Conversion Adapter
(Mating portion: U.FL side jack - SMA side plug)
(10.7)
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
8HEX
Part No.
CL No.
HRMP-U.FLJ
311-0300-2
●SMA Conversion Adapter
(Mating portion: U.FL side plug - SMA side jack)
14.05
(4.05)
5.6
Ø6.35
6
1/4-36UNS-2A
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
●SMA Conversion Adapter
(Mating portion: U.FL side plug-SMA side jack)
Part No.
CL No.
HRMJ-U.FLP
311-0301-5
(18.6)
(4)
6
5.5
1/4-36UNS-2A
Note: This connector is used by compressing the mated
portion of U.FL side onto the U.FL-R-SMT portion.
Part No.
CL No.
HRMJ-U.FLP-ST1
311-0385-5
■Receptacle Inspection
12.9
This receptacle is used for inspecting the continuity, withstand
voltage, and other aspects of the harness product.
(7.9)
(4.4)
7HEX
5
1
M5∞0.5
This receptacle is used for check the continuity, withstanding
voltage, and other performance of the cable assembly products.
Part No.
CL No.
U.FL-R-1
331-0466-0
■Plug Extraction Tool
(90)
This jig is used for extraction from a mating condition.
Ø15
U.FL
2.1
5
50
Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088.
Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062.
6
Part No.
CL No.
U.FL-LP-N-2
331-0494-5
U.FL-LP(V)-N-2
331-0493-2
■Usage Precautions
1. Plugs
(1) Connection/
disconnection of
connectors
1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges
and pull off vertically, in the direction of the connector mating axis.
2) To mate the connectors, the mating axes of both connectors must be
Extraction Jig
aligned and the connectors can be mated. The "click" will confirm fully
U.FL Cable
mated connection.Do not attempt to insert on an extreme angle.
Assembly
U.FL-R-SMT
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram
below.
U.FL-LP-040
2N max.
U.FL-R-SMT
(2) Permissible load on
the cable after
connector are mated.
4N max.
2N max.
(3) Precautions
Do NOT forcefully twist or deform wires.
Temperature on
Top Portion of Part
2. Receptacles
(1) Recommended
soldering temperature
profile
(ç)
260
240
220
200
180
160
140
120
100
80
Heating peak
240ç 3 seconds
Preheating 183ç
(130 to 165ç)
Within 2 minutes
40 to 50
seconds
Time
1) The temperature profile indicates the board surface temperature at the point of contacts with the connector
terminals.
2) The temperature profile will change depending on conditions which include such factors as the size of the board,
the solder used, and the solder thickness.
(2) Recommended
manual soldering
Manual soldering: 350˚C for 5 seconds
(3) Recommended screen
0.1 to 0.15 mm
thickness
7