Connection Assessment & Approval Application Supporting Documentation – Connected Wholesale Customer Facilities Submit this form by mail, courier, fax to the following address: The IMO Attn: Connection Assessment and Approval 655 Bay Street, Suite 410 P.O. Box 1 Toronto, ON M5G 2K4 Fax No.: (416) 506-2847 Subject: Supporting Documentation - Connected Wholesale Customer Facilities All information submitted in this process will be used by the IMO solely in support of its obligations under the Electricity Act, 1998, the Ontario Energy Board Act, 1998, the Market Rules and associated policies, standards and procedures and its licence. All information submitted will be assigned the appropriate confidentiality level upon receipt. PART 1 – GENERAL INFORMATION Organization Name: CAA ID No.(if applicable) : Main Contact Name: Position: Telephone No.: Fax No.: E-mail Address: IMO-FORM-1173 v.1.0 NEW 00-06 Page 1 of 4 Organization Name: Organization Name: [ ] PART 2 - CERTIFICATION The undersigned hereby declares that the information contained in and submitted in support of this document is, to the best of the party’s knowledge, complete and accurate. By signature the applicant agrees that non-confidential information may be posted on the IMO Web site. Name (Please Print) Title Signature Date PART 3 – FOR IMO USE ONLY Received by: Date Received: CAA ID No.: IMO-FORM-1173 v.1.0 NEW 00-06 Page 2 of 4 Organization Name: [ Organization Name: ] Connected Wholesale Customer Facilities Load Schedule Nature of Load Date Peak Load Power Factor Load Factor Commissioning [Enterdate date] Enter MW [Enter#number] Enter % [Enter#number] Enter % [Enter#number] Enter Initial [Enterdate date] Enter MW [Enter#number] Enter % [Enter#number] Enter % [Enter#number] Enter Ultimate [Enterdate date] Enter MW [Enter#number] Enter % [Enter#number] Enter % [Enter#number] Enter [Enter#number] Enter [Enter#number] Enter Composition (e.g. % industrial, % commercial, %residential) [Enter#number] Enter Requirement for dual supply [Enterrequirement number] Enter Description of unusual sensitivity to voltage or frequency fluctuations [Enter text or attach file] Enter text or attach file Description of unusual consequences of power outages [Enter text or attach file] Enter text or attach file Power Quality (upon request) Harmonics (frequency, magnitude) [Enternumber number] Enter [Enternumber number] Enter Flicker (voltage change, frequency) [Enternumber number] Enter [Enternumber number] Enter Phase Imbalance (%) Variable Speed Drives [Enternumber number] Enter Demand (kVA) [Enternumber number] Enter Description Demand (kVA) [Enternumber number] Enter Description Demand (kVA) [Enternumber number] Enter Description Demand (kVA) [Enternumber number] Enter Description Demand (kVA) [Enternumber number] Enter Description Demand (kVA) [Enternumber number] Enter Description Total Size (kVA) [Enternumber number] Enter Description [Entertext textor orattach attach file file] Enter Welding Equipment [Entertext textor orattach attach file file] Enter Static Converters [Entertext textororattach attach file file] Enter Furnace [Entertext textororattach attachfile file] Enter Other discontinuous or harmonic rich load [Entertext textor orattach attach file file] Enter Capacitors [Entertext textororattach attachfile file] Enter Generators [Entertext textororattach attachfile file] Enter November to April (Winter) Maximum Demand Load Shape Weekday Motors = 500 HP IMO-FORM-1173 v.1.0 NEW 00-06 Weekend May to October (Summer) Maximum Demand Weekday Weekend Hours MW Mvar MW Mvar MW Mvar MW Mvar 0-4 [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter 4-8 [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter 8-12 [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter 12-16 [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter 16-20 [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter 20-24 [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter Type (e.g. squirrel cage, wound rotor, synchronous) [Entertype type] Enter Rated capability (MVA) [Enternumber number] Enter Rated power factor [Enternumber number] Enter Starting method (e.g. full-voltage, resistive, reduced voltage, delta-wye) [Entertext text] Enter Starts per day [Enternumber number] Enter Page 3 of 4 Organization Name: [ Organization Name: ] Connected Wholesale Customer Facilities (cont’d) Induction Motors = 25,000 HP or = 500 HP per request Synchronous Motors = 500 HP Identifier [Entertext/# text/ number] Enter Rated capability (MVA or HP) [Enternumber text] Enter Rated torque (per unit on machine base) [Enternumber number] Enter Rated slip (per unit on machine base) [Enternumber number] Enter Starting torque (per unit on machine base) [Enternumber number] Enter Starting current (per unit on machine base) [Enternumber number] Enter Starting power factor [Enternumber number] Enter Peak torque (per unit on machine base) [Enternumber number] Enter Locked rotor current (per unit on machine base) [Enternumber number] Enter Identifier [Enternumber number] Enter Rated output (MVA or HP) [Enternumber text] Enter X’’d (unsaturated subtransient reactance in per unit on machine base) [Enternumber number] Enter For each synchronous motor rated = 5000 HP Rotational inertia constant H of motor and load (s) [Enternumber number] Enter Unsaturated reactances (per unit on machine base) Xd X’d X’’d Xq X’q X’’q Xl X2 Xo [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter [Enter##] Enter Open circuit time constants (s) T’do T’’do T’qo T’’qo [Enternumber number] Enter [Enternumber number] Enter [Enternumber number] Enter [Enternumber number] Enter Armature resistance (Ra) (per unit on machine base) [Enternumber number] Enter EXCITATION SYSTEM MODEL A block diagram suitable for stability studies or an IEEE standard model type with all in-service parameter values for the exciter. Models for stabilizers, under-excitation limiters, and over-excitation limiters shall be provided where applicable. For each synchronous motor 10 MVA or larger. IMO-FORM-1173 v.1.0 NEW 00-06 Attach diagram Page 4 of 4