Series
PCC60W-MC-MATCH1400
60W multicurrent selectable output LED Power Supply with PFC function
■ Features:
• Constant current design
• 4 kinds of output current selectable
• Output current adjustment (±10%) by built-in potentiometer
• Built-in active PFC function
• Universal AC input / Full range
• Protections: Short circuit / Overcurrent / Overvoltage
• Cooling by free air convection
• Isolation class II
ELECTRICAL SPECIFICATION
MODEL
PCC60W-MC-MATCH-1400
OUTPUT
NO OUTPUT DC VOLTAGE (max.)
45V
OUTPUT NUMBER
CH1
CH2
CH3
CH4
RATED CURRENT
700mA
900mA
1050mA
1400mA
VOLTAGE RANGE
20 ÷ 42V
CURRENT ADJUSTMENT [1]
630 ÷ 770mA
810 ÷ 990mA
945 ÷ 1155mA
1260 ÷ 1540mA
CURRENT ACCURACY
± 5%
RATED POWER
58.8W
LINE REGULATION
± 1%
LOAD REGULATION
± 3%
TOLERANCE [4]
± 5%
RIPPLE & NOISE (max.) [3]
1.5VP-P
2VP-P
2.5VP-P
3VP-P
SETUP, RISE, HOLDUP TIME [5]
800ms, 80ms, 20ms / 230VAC; 1300ms, 80ms, 20ms / 115VAC at full load
INPUT
VOLTAGE RANGE
90 ÷ 264VAC; 127 ÷ 370VDC
FREQUENCY RANGE
47 ÷ 63Hz
EFFICIENCY (typ.)
82%
AC CURRENT (typ.)
1.0A/115VAC, 0.5A / 230VAC
POWER FACTOR
PF > 0.9 / 230VAC; PF > 0.95 / 115VAC at full load
84%
85%
86%
PROTECTIONS
Range: 110 ÷ 130%
OVER CURRENT
Type: constant current limiting to 50% rated voltage next hiccup mode. Recovers
automatically after fault condition is removed.
SHORT CIRCUIT
Type: hiccup mode. Recovers automatically after fault condition is removed.
Max. 50V
OVER VOLTAGE
P C C 4 0 W- M C- M ATC H - 1 4 0 0 - s p e c - E N - R 1 0 6 . 1 1 . 2 0 1 5
Type: hiccup mode. Recovers automatically after fault condition is removed.
Series
PCC60W-MC-MATCH1400
60W multicurrent selectable output LED Power Supply with PFC function
ENVIRONMENT
WORKING TEMPERATURE
-20°C ÷ 60°C
WORKING HUMIDITY
20 ÷ 90% RH non-condensing
STORAGE TEMPERATURE AND HUMIDITY
-40°C ÷ 80°C, 10 ÷ 95% RH non-condensing
TEMPERATURE COEFFICIENT
± 0.03% / °C (0°C ÷ 50°C)
SAFETY & EMC REGULATIONS
SAFETY STANDARDS
Compliance to EN61347-1, EN61347-2-13
WITHSTAND VOLTAGE
I-P/O-P: 3.0kVAC
ISOLATION RESISTANCE
I-P/O-P: 100MΩ/500VDC/25°C/70%
EMC EMISSION
Compliance to EN55015
EMC IMMUNITY
Compliance to EN61547; IEC 61000-4-2, -3, -4, -5, -6, -8, -11
HARMONIC CURRENT
Compliance to EN61000-3-3; EN61000-3-2 class C
OTHERS
DIMENSIONS
121 x 81 x 28mm (L x W x H)
WEIGHT AND PACKING
0.23kg; 50pcs./box; box weight and dimensions: 12kg; 45.5 x 28 x 18.5cm
1. By built-in potentiometer.
2. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF i 47μF parallel capacitor.
4. Tolerance incudes set up tolerance, line regulation and load regulation.
5. Setup and rise time is measured from 0 to 90% rated output voltage.
6. Power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final
equipment must be re-qualify to comply with EMC Directives.
P C C 4 0 W- M C- M ATC H - 1 4 0 0 - s p e c - E N - R 1 0 6 . 1 1 . 2 0 1 5
Series
PCC60W-MC-MATCH1400
60W multicurrent selectable output LED Power Supply with PFC function
ELECTRICAL SPECIFICATION
PIN No. Assignment
PIN No.
Assignment
7
Output CH1: V+ 700mA
4, 5, 6 Input: AC/N
8
Output CH2: V+ 900mA
9
Output CH3: V+ 1050mA
10
Output CH4: V+ 14000mA
11
Output: V- common
100
90
90
80
80
70
60
50
40
LOAD / RATED LOAD [%]
LOAD / RATED LOAD [%]
STATIC CHARACTERISTIC
100
80
70
60
50
40
30
30
20
20
0
Horizontal
Orientation
10
20
30
40 45 50
AMBIENT TEMPERATURE [°C]
P C C 4 0 W- M C- M ATC H - 1 4 0 0 - s p e c - E N - R 1 0 6 . 1 1 . 2 0 1 5
Assignment
1, 2, 3 Input: AC/L
DERATING CURVE
-20
PIN No.
60
70
90
100
115
130
150
180
200
INPUT VOLTAGE [VAC / 60Hz]
240
264