MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
24 PIN MLF
CASE 485F–01
ISSUE O
SCALE 4:1
DATE 01/30/2001
2 PL
0.25 T X
–X–
xxxxx
ABC
A
H
F
2 PL
P
24
0.25 T Y
19
1
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS
3. DIE THICKNESS ALLOWABLE IS 0.305 MM
MAXIMUM (0.012 INCHES MAXIMUM).
4. DIMENSION D APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.20 AND 0.25 MM
FROM TERMINAL.
5. THE PIN #1 IDENTIFIER MUST BE ON THE TOP
SURFACE OF THE PACKAGE BY USING
IDENTIFICATION MARK OR OTHER FEATURE OF
PACKAGE BODY.
6. EXACT SHAPE AND SIZE OF THIS FEATURE IS
OPTIONAL.
7. THE SHAPE SHOWN ON FOUR CORNERS ARE
NOT ACTUAL I/O.
8. PACKAGE WARPAGE MAX 0.05 MM.
18
N
R
Q
NOTE 5 & 6
B
E
6
13
2 PL
0.20 T Y
7
–Y–
12
2 PL
0.20 T X
AB
M
AA
C
–T–
0.05 T
AE
K
V
4 PL
AF
NOTE 7
AD
4 PL
Z
AG
4 PL
W
xxxxx = Specific Device
ABC = Date Code
DIM
A
B
C
D
E
F
G
H
K
L
M
N
P
Q
R
V
W
Z
AA
AB
AD
AE
AF
AG
MILLIMETERS
MIN
MAX
4.00 BSC
4.00 BSC
--1.00
0.18
0.30
3.75 BSC
3.75 BSC
0.50 BSC
2.00 BSC
0.01
0.05
0.30
0.55
--12 °
2.00 BSC
1.88 BSC
0.50 DIA
1.88 BSC
2.50 BSC
1.30 BSC
2.50 BSC
0.65
0.80
0.20 REF
1.30 BSC
0.13
0.23
0.24
0.60
0.30
0.45
INCHES
MIN
MAX
0.157 BSC
0.157 BSC
--0.039
0.007
0.012
0.148 BSC
0.148 BSC
0.020 BSC
0.79 BSC
0.000
0.002
0.012
0.022
--12 °
0.079 BSC
0.074 BSC
0.020 DIA
0.079 BSC
0.098 BSC
0.051 BSC
0.098 BSC
0.026
0.031
0.008 REF
0.051 BSC
0.005
0.009
0.009
0.024
0.012
0.018
L
AF 4 PL
D NOTE 4
0.10
G
M
T X Y
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
 Semiconductor Components Industries, LLC, 2001
January, 2001 – Rev. 01O
1
Case Outline Number:
485F