Temperature Controller
PID500 (48 x 48)
MODEL (Bezel Size)
Features
PID110 (96 x 48)
PID330 (96 x 96)
Advanced PID Controller, Covers most applications.
Description
Universal input, Auto tune, Selectable lower display, Single point ramp-soak, Heat-cool PID, Soft start, Auto / manual mode
Profile controller
Alarm at each step of profile,
Linked profiles, Deviation hold,
Memory during power fail,
Programmable repeat cycle
Display
4 digit Upper display: Process value, 4 digit Lower display: Selectable.
Inputs
Thermocouple: J, K, T, R, S, C, E, B, N, L, U, W, Platinel II RTD: Pt100, Signal Inputs (DC): -5 to 56 mV, 0 to 10 V, 0 to 20 mA
Sampling Time
200 ms
TC / RTD : 1 / 0.1O ; Analog input :1 / 0.1 / 0.01 / 0.001.
Resolution
Temperature Unit
0
C / 0F (selectable)
0
For TC inputs: 0.25% of F.S. ±1 : For R & S inputs: 0.5% of F.S. ±20 (20 min of warm up time)
For RTD inputs: 0.1% of F.S. ±10: Cold junction accuracy ± 50C ; Signal input: ±0.5%, ± 1 digit
Relay : 5 A@ 230V AC or 30V DC, or SSR drive voltage : 18V DC, @ 20 mA or
Current : 0/4 to 20 mA DC (max load 500E) (for PR502 : 4 to 20mA DC) or Voltage: 0 to 5/10V DC (min load 10K) (for PR502 : 0 to 10V DC)
Indication Accuracy
Main Output
Max 2 (Relay or SSR drive voltage), For PR502 : Max 1 (Relay or SSR drive voltage)
Mode : Set point or Alarm mode. Alarm operation: Absolute / Deviation / High / Low / Band, Sensor break.
Auxiliary Output
0/4-20 mA or 0 - 5 V, or 0 - 10V DC (Main output is user selectable as control or retransmission output)
Retransmission Output
4 - 20mA or 0 - 10V DC
Autotune PID or ON - OFF, P, PI, PD, PID
Control Action
Hysteresis
0.1 to 99.90
PID Parameter
Proportional Band : 0.0 to 400.0 , Integral Time : 0 to 3600 sec, Derivative Time : 0 to 200 sec, Cycle Time : 0.1 to 100 sec
Heat Cool PID
Control Method : PID, Cycle Time : 0.1 to 100 sec, Proportional Gain : 0.0 to 400.00, Deadband : Programmable (SPLL to SPHL)
0
Modes : Deviation high/low, Absolute high/low, Band, Sensor break, Hysteresis : 0.1 to 99.90
Alarms
Ramp Rate : 1 to 99990/hr, Soak Time : 0 to 1440 min
Ramp Soak
Soft Start Time
0 to 999 min
No. of Profile : 10,
No. of Steps : 16 each,
Ramp / Soak Time Range :
00.00 to 99.59 hrs : min,
Target Temperature Range :
SPLL to SPHL
Profile Parameter
Remote Set Point Input
(Optional)
Heater Current
Monitor Input (Optional)
Motorised Value Input
(Optional)
Communication
(Optional)
Input Type : 0 to 20mA DC / 0 to 10V DC,
Input Resistance : 100 ohm, Range : -5% to 105%,
Scale Range : -1999 to 9999 with fixed 10 for TC/RTD &
as per resolution selected for analog input
Input : 100mA AC, 50 to 400Hz, Display Scale Range : 0 to 999.9
Input Resistance : 47 ohms, Accuracy : ±0.5% F.S ±1 digit,
Alarm Mode : LA / HA BAND, Over Load : 150mA (continuous)
Closed Loop Feedback Input :
Potentiometric - Voltage Input Range - 0 to 10V DC
Current Input Range - 4 to 20mA DC
Motorised Control Mode : Bounded / Boundless
Manual Motor Control Modes : Rest / Run / Up / Down
Motor position Indication (in %) : 0.0 to 100.0%
Valve Travel Time : 0.1 to 240.0 sec
Control Action (fixed) : Output1 : Reverse action
Output2 : Forward action
Interface Standard : RS485, Communication address : 1 to 99, maximum of 32 units per line, Transmission Mode : Half duplex,
Transmission Protocol : MODBUS RTU, Transmission Distance : 500m maximum, Transmission Speed : 9600, 4800, 2400, 1200, 600, 300 bits/sec
85 to 270V AC/DC ( AC: 50/60 Hz) ; Optional 24V AC/DC models available on request
Power Supply
Temperature
O
95% RH.
Flame retardant engineering plastic. (IP65 on front)
Housing
Weight
Certification
Dimensions
85 to 270V AC/DC
O
Operating: 0 to 50 C. ; Storage: -20 to 75 C.
Humidity
180 gms
230 gms
®
C
330 gms
®
US
Refer diagram A on page 7
Refer terminal diagram on page no. 5 & ordering information on page no. 6
1
PR502 (48 x 48)
C
170 gms
®
US
Refer diagram F on page 7
C
®
US
Refer diagram C on page 7
C
US
Refer diagram A on page 7
Temperature Controller
MODEL (Bezel Size)
TC544A (48 x 48)
TC244AX (72 x 72)
TC344AX (96 x 96)
DTC204A-2 (72 x 72)
DTC324A-2 (96 x 96)
TC513AX (48 x 48)
TC203AX (72 x 72)
TC303AX (96 x 96)
TC533AX (48 x 48)
7 segment LED, dual display
Display
7 segment LED, Single display
Digits
4 digits
4 + 4 digits
LED Indications
Control output ON, Tune ON
Relay ON, Tune, Soak Time
7 segment LED, single display
3 + 3 digits
3 digits
Control output ON
Input Specifications
Thermocouple (J,K,T,R,S) / RTD (PT100)
Types
Sampling time
250 ms
0.1/10 for TC/RTD inputs
(fixed 10 for R & S type TC input)
Resolution
Fixed 1o resolution
Temperature Unit
o
C / 0F selectable
For J, K & T TC inputs: 0.25% of F.S ±10, For R & S inputs: 0.5% of F.S. ±20
(20 min of warm up time for TC inputs), For RTD input: 0.1% of F.S. ±10
Indication Accuracy
Output Specifications
Control Output
Relay
1
5A@250V AC / 30V DC, resistive
10A@230V AC/30V DC
10 A@250V AC or 30V DC, resistive
12V DC, 50mA
SSR
Auxiliary Output
1
Relay
5A@230V AC or 30V DC, resistive
12V DC, 50mA
SSR
Functional Specifications
PID or ON/OFF
Control Method
Hysteresis
0.1 to 99.9°
Proportional Band
1.0 to 400.0°
Integral Time
0 to 9999 sec
Derivative Time
0 to 9999 sec
0.0 to 99.9 min
0 to 999 sec
Cycle Time
0.1 to 99.9 sec
-19.9 to 19.9°
Manual Reset Value
Dwell (Soak) timer
OFF, 0 to 9999 min
Heat - Cool PID
PID (with auto-tuning)
Control Method
Proportional Band-Cool
0.0 to 400.00
Cycle Time-Cool
0.1 to 99.9 sec
SPLL to SPHL (Programmable)
Dead Band
Alarm
Deviation, Absolute
Alarm Modes
Hysteresis
Supply Voltage
( AC: 50 or 60 Hz )
0.1 to 99.90
85 to 270V AC/DC
85 to 270V AC/DC,
24V AC/DC
0
Operating: 0 to 50 , Storage: -20 to 75
Temperature
Humidity (non-condensing)
0
95% RH
DTC204A-2: 199 gms
DTC324A-2: 252 gms
Certification
Dimensions
85 to 270V AC/DC,
24V AC/DC (only for TC513AX)
Flame retardant engineering plastic. (IP65 on front)
Housing
Weight
85 to 270V AC/DC
TC544A:142 gms
TC244AX: 190 gms
TC344AX: 252 gms
TC533AX:129 gms
®
C
DTC204A-2 : Refer diagram B on page 7
DTC324A-2 : Refer diagram C on page 7
Refer terminal diagram on page no. 5 & ordering information on page no. 7
TC513AX:129 gms
TC203AX: 180 gms
TC303AX: 240 gms
®
US
TC544A : Refer diagram A on page 7
TC244AX : Refer diagram B on page 7
TC344AX : Refer diagram C on page 7
C
®
US
Refer diagram A on page 7
C
US
TC513AX : Refer diagram A on page 7
TC203AX : Refer diagram B on page 7
TC303AX : Refer diagram C on page 7
2
Temperature Controller
PID528 (48 x 48)
MODEL (Bezel Size)
Description
Features
TC518 (48 x 48)
TC52 (48 x 48)
Economical PID
Auto tune, Input selectable (6 types)
Control mode : ON / OFF, P, PI, PD,
PID
Auto tune, Input selectable (6 types)
Control modes : PID or ON/OFF
4 digit Upper display: PV, 4 digit Lower display: SV
Display
Thermocouples: (J, K, T, R, S.) RTD: Pt100
Inputs
Sampling Time
Indication Accuracy
Control Action
Cooling Controller
Fix input (J / K)
Control modes : ON-OFF / P
Defrost management,
High & low alarm
Dial settings
3 digits
Thermocouples: (J, K)
NTC sensor
1o/0.1o for TC/RTD
0
C(fixed)
0
10/0.10
0
0
C / F (Selectable)
0
0
For TC inputs: 0.25% of F.S. ±1 : For R & S inputs: 0.5% of F.S. ±2
(20 min of warm up time) For RTD inputs: 0.1% of F.S. ±10
Relay : 5 A@ 230V AC or 30V DC, or
SSR drive voltage : 18V DC, @ 20 mA
Main Output
Auxiliary Output
Analog Controller
250ms
Resolution
Temperature Unit
CH403 (36 x 72)
Relay : 5A@250V AC or
30V DC
Autotune PID or ON /
OFF, P, PI, PD, PID
±1% of F.S.
5A@230V AC
10A@230V AC or 20A
SSR drive 12V DC, 10mA or
Relay 5A@230V AC
Autotune PID or ON / OFF
Hysteresis
P or ON/OFF
ON / OFF
0.1 to 9.90C / 0F
0.1 to 99.90
Proportional Band
0.0 to 400.0
Integral Time
0 to 3600 sec
Derivative Time
0 to 999 sec
C / 0F (Selectable)
0
Cycle Time
0.1 to 99.9 sec
Manual Reset Value
-99.9 to 99.90
Display offset
-19.9 to 20.00C / 0F
Restart Time Delay
Adjustable from 00 to 99 Min
Relay Action
Heat & Cool mode
Defrost Time
Programmable from 00 to 99 Min
Defrost Frequency
Programmable from 00 to 99 (Hr/Min/Sec)
Power Supply
85 to 270V AC/DC
Temperature
0
0
Operating: 0 to 50 C. ; Storage: -5 to 500C.
Operating: 0 to 50 C. ; Storage: -20 to 75 C.
Humidity
95% RH.
95% RH.
95% RH.
Flame retardant engineering plastic. (IP65 on front)
Housing
160 gms
Weight
Certification
Dimensions
160 gms
®
C
85 to 270V AC/DC, 24V AC/DC (optional)
230V AC
0
IP50
130 gms
95% RH.
Flame retardant engineering plastic.
(IP65 on front)
110 gms
®
US
Refer diagram A on page 7
C
®
US
C
Refer diagram A on page 7
Refer diagram A on page 7
US
Refer diagram D on page 7
Refer terminal diagram on page no. 5
Ordering Information
PRODUCT
ORDER CODE
Supply Voltage
DESCRIPTION
230V AC
PID528
TC518
TC52
CH403
PID528-1
Main O/P : 5A@230V AC / 30V DC, Auxiliary Output : 5A@230V AC / 30V DC
PID528-2
Main O/P : 18V DC SSR@20mA, Auxiliary Output : 5A@230V AC / 30V DC
TC518
Relay : 5 A@ 230V AC or 30V DC
TC518-SSR
SSR : 18V DC @ 20 mA
TC52-400-J-230
TC52 (Product) - 0 - 4000C - J Type Thermocouple - 230V AC supply
TC52-400-K-230
TC52 (Product) - 0 - 400 C - K Type Thermocouple - 230V AC supply
CH403-1
CH403-1-24V
CH403-2
CH403-2-24V
CH403-3
CH403-3-24V
85-270V AC/DC
0
Main O/P : 10A@230V AC Relay, Alarm Output : 12V DC SSR, 10mA
Main O/P : 20 A@230V AC Relay, Alarm O/P : None
Main O/P : 10A@230V AC Relay, Alarm Output : 5A@230V AC Relay
For CE certified & UL approved product's order code, Please refer datasheet / ordering info of respective product available at www.selec.com
3
24V AC/DC
Temperature Controller
MODEL (Bezel Size)
Description
PIC1000N (48 X 96)
PIC152N (48 X 96)
4 Alarm outputs,
2 Alarm outputs with
Retransmission, Communication retransmission.
Low cost indicator (no output)
Alarm ON (4 Nos)
Alarms
Alarm Modes
Alarm ON (2 Nos)
Thermocouple: J, K, T, R, S, C, E,
L, U, W, N, B, Platinell II
RTD: PT100, PT1000
Signal Inputs (DC): -5 to 56 mV,
0 to 100 mV, 0 to 10V, 0/4 to 20 mA
Thermocouple: J, K, T, R, S
RTD: PT100
Signal Inputs (DC): -5 to 56 mV,
0 to 10V, 0/4 to 20 mA
Thermocouple: J, K, T, R, S
RTD: PT100
Signal Inputs (DC): 0 to 56 mV,
0 to 10 V, 0/4 to 20 mA
Thermocouple: J, K, T, R, S
RTD: PT100
0
1/0.10 (Fix 1 resolution
for R & S type TC)
TC Inputs: 0.25% of F.S. ±10 ,
R & S Inputs: 0.5% of F.S. ±20
(20 min of warm up time),
RTD Inputs: 0.1% of F.S. ±10
For TC inputs: 0.25% of F.S. ±10, For R & S inputs: 0.5% of F.S. ±20 (20 min of warm up time
for TC input), For RTD inputs: 0.1% of F.S. ±10, For Signal inputs: ±0.5% of F.S., ± 1 digit
4 nos
Programmable
Automatic or Latched
Relay Rating
5A @ 250V AC or 24V DC
Retransmission
Output
0/4 to 20 mA DC, 0 to 5V DC, 0 to 10V DC
24V DC, 30 mA
Sensor Supply
RS485 (MODBUS)
Supply Voltage
85 to 270V AC/ DC, Optional - 24V DC
AC: 50 or 60 Hz
230V AC, ± 20%, 50/60 Hz
o
o
Operating:0 to 50 C. Storage:-20 to 75 C.
Temperature
Humidity
95% RH.
Housing
Flame retardant engineering plastic. (IP65 on front)
Panel Cutout Size
260 gms
240 gms
®
C
200 gms
®
US
C
200 gms
US
C
US
Refer diagram E (U) on page 7 Refer diagram E (U) on page 7 Refer diagram E (U) on page 7 Refer diagram E (V) on page 7 Refer diagram E (V) on page 7
Retransmission
Ordering Information
Communication
Supply Voltage
85-270V AC/DC
PIC1000N-A
Part No.
Retransmission
24V AC/DC
4-20mA
PIC152N-B-1
0-20mA
PIC1000N-D-2-24V
4-20mA
PIC152N-B-1-24V
0-20mA
PIC1000N-E-1
0-20mA
PIC152N-B-2
4-20mA
PIC1000N-E-1-24V
0-20mA
PIC152N-B-2-24V
4-20mA
PIC1000N-E-2
4-20mA
PIC152N-B-3
PIC1000N-E-2-24V
4-20mA
PIC152N-B-3-24V
0-5V
0-5V
PIC152N-B-4
0-10V
PIC1000N-E-3-24V
0-5V
PIC152N-B-4-24V
0-10V
PIC1000N-E-4
0-10V
PIC1000N-E-4-24V
0-10V
PIC101N-24V
24V AC/DC
PIC152N-A-24V
PIC1000N-D-2
PIC101N
Supply Voltage
85-270V AC/DC
PIC152N-A
PIC1000N-A-24V
PIC1000N-E-3
195 gms
®
Refer terminal diagram on page no. 5
Part No.
±0.5% of F.S.,± 1 digit
(F.S. = Full Scale)
0.1 to 99.90
Reset Action
Certifications
Decimal point position selectable:
1/0.1/0.01/0.001
High alarm, Low alarm, Band, Fail output and Fault diagnosis
Annunciator
Weight
Signal input (DC) : 0 - 10V,
0 / 4 to 20mA
2 nos
Hysteresis
Communication
None
Temperature input: 1/0.1oC / oF ; Signal input: 0.001, 0.01, 0.1 & 1.
Resolution
Accuracy
Low cost Indicator
Over range/Under range/Open sensor/ TC reverse
Error Indications
Inputs
PIC101A-VI-230
(48 X 96)
4 digit, 7 segment LED : 0.56”
Display
LED Indication
PIC101A-T-230
(48 X 96)
PIC101N (48 X 96)
Part No.
0-5V
Supply Voltage (230V AC)
PIC101A-T-230
PIC101A-VI-230
For CE certified & UL approved product's order code, Please refer datasheet / ordering info of respective product available at www.selec.com
4
Temperature Controller
Terminal Connections
+ 4
- 5
15 10
COM1
COM3
2
RS485
5
4
3
+
+
+
V
8
7
6
9
10
+
1
RTD3
TC /RTD2
mV
RS485
SSR1/
ANA OP
RTD3
SSR2
SSR3
+
ANA IP
+ 14 9
MI / CT / R-SP
N
L
19
20
+
8 TC /RTD2
+
NO1
CT / MI / R-SP
SSR3
SSR2
COM2
+ 14 9
RTD3
7
- 12
13
SSR1/ 0-5 V/
0 -10 V/4 -20mA
SSR2
SSR1/ 0-5 V/
0 -10 V/4 -20mA
- 3
TC /RTD2
ANA IP
NO3
-
- 5
COM1
+
2
(-) N
TC + /RTD1
ANA IP +
PR502
11
12
13
14
15
16
NO1
COM1
NO2
COM2
NO3
COM3
17
18
+
-
+ 4
8
-
NO1
13
-
COM2
7
+ 11 6
-
+
- 3
- 12
NO2
-
2
1
L (+)
TC+ /RTD1
ANA IP+
-
CT /
RS485
-
+ 11 6 (-) N
L (+) 1
NO2
PID110 / 330
TC + /RTD1
mV +
PID500
- 15 10
Terminal connection with second analog input
13
COM2
5
14
NC2
6
15
7
16
8
17
NC1
2
3
NO
11
3
12
4
13
5
14
6
15
7
16
18
12
6
13
7
18
14
SSR1
9
COM1
N( )
2
TC+/RTD1
L (+)
1
8
N (-)
2
9
TC /RTD2
3
10
RTD3
4
11
5
12
6
13
7
14
7
3
NO
8
NC
9
4
SSR
-
COM
5
10
12
SSR
5
COM
-
PID528
(-)
COM
SSR2
NO
SSR1
COM
NC
NC1
TC+/RTD1
TC-/RTD2
RTD3
+
TC52
ON-OFF/ PROPORTIONAL
Selection Link
6
1
L (+)
N (-)
+
SSR
TC518
(+)
RTD3
10
12
+
TC203AX
6
11
RTD3
SSR
5
NO1
TC-/RTD2
-
NC2
NO
- SSR
17
9
NC1
1
9
-
NO
8
17
L (+)
TC-/RTD2
NC
11
+
10
2
16 +
8
NC
8
4
4
+
TC+/RTD1
1
7
RTD3
TC303AX
N (-)
TC+/RTD1
7
18
L (+)
NO1
COM1
TC /RTD2
NC
COM2
13
14
15
+
9
N( )
6
11
9
10
TC513AX
RTD3
NO1
COM1
1
TC-/RTD2
NO2
4
L (+)
2
3
SSR
11
12
6
NO2
TC+/RTD1
-
2
3
NC2
TC533AX
TC+/RTD1
10
NC1
5
TC + /RTD1
2
7
3
8 TC /RTD2
SSR
N (-)
14
4 +
NO2
COM2
N (-)
RTD3
-
1
13
7
COM1
DTC324A-2
L (+)
12 +
6
NO1
10 COM1
12
RTD3
11
TC /RTD2
8
1
L (+)
-
5
12
SSR2
NC2
3
-
4
9
SSR1-
5
COM2
SSR1
NO1
RTD3
-
- SSR2
4
COM2
8
11
TC / RTD2
10
SSR2
+
3
NO2
10
-
NO2
+
3
-
-
TC /RTD2
1
2
N( )
9
2
N( )
7
L (+)
TC + /RTD1
-
SSR1+
2
8
1
L (+)
-
N( )
6
11
-
1
DTC204A-2
TC344AX
TC + / RTD1
-
L (+)
TC244AX
TC+/RTD1
-
TC544A/TC544A-1
4
9
5
10
RTD3
COM
PIC1000N
PIC152N
mV/TC/RTD
2
3
B
4
+
B’
5
7
6
-
8
9 10
1
24
22
21
sensor supply
21
23
+
-
11 12 13 14 15 16 17 18 N
NO1 NO2 NO3 NO4 COM GND +24V
2
3
+
3
4
5
6
- +
Short
for TC
3
4
N
8
L
V
1
9
10
Short
for RTD 22
19 20
2
4
5
6
mA
+ -
5
6
7
8
CONFIG
1
22
9 10
24
23
21
23
11 12 13 14 15 16 17 18 N
L
+24V GND
- +
L
- +
sensor supply
CH403
mA
+
3
V
+ -
24
+
-
2
B’
9 10
sensor supply
NO1 COM1 NC1 NO2 COM2 NC2
A
11 12 13 14 15 16 17 18
5
8
B
A
PIC101A-VI-230
B
7
7
6
mA / V-
+
21
2
5
-
GND +24V
TC / RTD
+
1
4
+
-
+
ANALOG
OUTPUT
B’
11 12 13 14 15 16 17 18 N
L
L
B’
B
mA+ V+
PIC101A-T-230
N
-
A
mA / V-
mA+ V+
+
ANALOG
OUTPUT
mV/TC/RTD
+
1
22
FOR
PT100
-
A
-
+
+
PIC101N
mV/TC/RTD
7
8
21
NO COM NC ALARM
9
+
10
22
19 20
SENSOR
N
L
1 2 3 4 5 6 7 8 9 10 11 12
+
COM
11 12 13 14 15 16 17 18
-
NO
(VALID FOR 20A)
Temperature Controller
Ordering Information
PID500 / PID110 / PID330
PRODUCT NAME
OUTPUT 3
OUTPUT 1
OUTPUT 2
PID500/110/330-0-0-00
RELAY
RELAY
NA
PID500/110/330-0-0-00-24V
PID500/110/330-0-0-01
RELAY
RELAY
RELAY
RELAY
NA
RELAY
PID500/110/330-0-0-04
RELAY
RELAY
RELAY
YES
PID500/110/330-0-0-04-24V
RELAY
RELAY
RELAY
YES
24V AC/DC
PID500/110/330-0-1-05
RELAY
12VDC SSR
12VDC SSR
YES
85-270V AC/DC
PID500-0-0-11-P
RELAY
RELAY
RELAY
RELAY
12VDC SSR
RELAY
RELAY
NA
NA
YES
YES
PID500-0-0-11-C
RELAY
RELAY
NA
YES
PID500-0-0-11-V
RELAY
RELAY
NA
YES
PID500-0-0-13-C
RELAY
RELAY
NA
YES
YES
PID500-0-0-07
PID500-0-1-09
PID500-0-0-13-V
RELAY / SSR
COMMUNICATION (RS485)
SUPPLY VOLTAGE
ADDITIONAL INPUT
85-270V AC/DC
24V AC/DC
85-270V AC/DC
85-270V AC/DC
CT input
85-270V AC/DC
CT input
Potentiometric f/b input
85-270V AC/DC
85-270V AC/DC
4-20 mA f/b input
85-270V AC/DC
0-10 V f/b input
85-270V AC/DC
85-270V AC/DC
4-20 mA input
0-10 V input
85-270V AC/DC
85-270V AC/DC
RELAY
RELAY
NA
18VDC SSR
RELAY
NA
18VDC SSR
RELAY
NA
18VDC SSR
RELAY
RELAY
PID500/110/330-1-0-04
18VDC SSR
18VDC SSR
12VDC SSR
RELAY
RELAY
RELAY
YES
85-270V AC/DC
PID500/110/330-1-0-04-24V
18VDC SSR
RELAY
RELAY
YES
PID500/110/330-1-1-05
18VDC SSR
18VDC SSR
12VDC SSR
RELAY
12VDC SSR
RELAY
YES
24V AC/DC
85-270V AC/DC
18VDC SSR
4-20mA
12VDC SSR
NA
YES
4-20mA
4-20mA
RELAY
NA
RELAY
RELAY
NA
RELAY
RELAY
RELAY
YES
RELAY
RELAY
YES
24V AC/DC
12VDC SSR
12VDC SSR
YES
85-270V AC/DC
RELAY
NA
YES
RELAY
NA
YES
RELAY
NA
PID500/110/330-1-0-00
PID500/110/330-1-0-00-24V
PID500/110/330-1-0-01
PID500/110/330-1-1-01
PID500-1-0-07
PID500-1-1-09
PID500/110/330-2-0-00
PID500/110/330-2-0-00-24V
PID500/110/330-2-0-01
PID500/110/330-2-0-04
PID500/110/330-2-0-04-24V
PID500/110/330-2-1-05
4-20mA
4-20mA
4-20mA
PID500-2-0-13-C
4-20mA
PID500-2-0-13-V
4-20mA
PID500/110/330-3-0-00
0 - 10V
PID500/110/330-3-0-00-24V
0 - 10V
PID500/110/330-3-0-01
0 - 10V
PID500/110/330-3-0-04
0 - 10V
PID500/110/330-3-0-04-24V
PID500/110/330-3-1-05
0 - 10V
0 - 10V
PID500-3-0-13-C
PID500-3-0-13-V
0 - 10V
0 - 10V
PID500/110/330-5-0-04
PID500/110/330-5-1-05
PID500/110/330-4-0-04
PID500/110/330-4-1-05
0 – 20mA
0 – 20mA
0 – 5V
0 – 5V
24V AC/DC
85-270V AC/DC
85-270V AC/DC
CT input
85-270V AC/DC
CT input
85-270V AC/DC
85-270V AC/DC
24V AC/DC
85-270V AC/DC
85-270V AC/DC
4-20 mA input
0-10 V input
85-270V AC/DC
85-270V AC/DC
85-270V AC/DC
24V AC/DC
RELAY
NA
RELAY
RELAY
RELAY
RELAY
YES
RELAY
RELAY
YES
12VDC SSR
12VDC SSR
YES
RELAY
RELAY
NA
NA
YES
YES
RELAY
12VDC SSR
RELAY
12VDC SSR
YES
YES
85-270V AC/DC
RELAY
RELAY
YES
85-270V AC/DC
12VDC SSR
12VDC SSR
YES
85-270V AC/DC
85-270V AC/DC
85-270V AC/DC
24V AC/DC
85-270V AC/DC
4-20 mA input
85-270V AC/DC
0-10 V input
85-270V AC/DC
85-270V AC/DC
CE certified & UL approved products are available only against order. Please add suffix - CU in front of above mentioned part numbers while ordering.
e.g. PID500-0-0-00-CU
PR502
COMMUNICATION (RS485)
OUTPUT 1
OUTPUT 2
PR502-0-0-0
RELAY
RELAY
PR502-0-0-1
PR502-0-1-1
RELAY
RELAY
Yes
85-270V AC/DC
RELAY
12VDC SSR
Yes
85-270V AC/DC
PR502-0-1-0
RELAY
12VDC SSR
PR502-1-0-1
18VDC SSR
RELAY
PR502-1-0-0
18VDC SSR
RELAY
PR502-1-1-0
18VDC SSR
12VDC SSR
PRODUCT NAME
PR502-1-1-1
18VDC SSR
12VDC SSR
PR502-2-0-0
4-20mA
RELAY
4-20mA
RELAY
RELAY
PR502-2-0-1
PR502-3-0-0
0 - 10V
SUPPLY VOLTAGE
85-270V AC/DC
85-270V AC/DC
Yes
85-270V AC/DC
85-270V AC/DC
Yes
85-270V AC/DC
85-270V AC/DC
85-270V AC/DC
Yes
85-270V AC/DC
85-270V AC/DC
CE certified & UL approved products are available only against order. Please add suffix - CU in front of above mentioned part numbers while ordering.
e.g. PR502-0-0-0-CU
6
Temperature Controller
Ordering Information
TC513/TC203/TC303/TC533
TC544/TC244/TC344/DTC204/DTC324
Output 1
Part No.
SSR
(12V DC)
Relay
Supply Voltage
Output 2
Relay
SSR
(12V DC)
85-270V
AC/DC
Output 1
Part No.
24V
AC/DC
SSR
(12V DC)
Relay
TC544A
TC513AX
TC544A-1
TC513AX-24V
TC544A-24V
TC203AX
TC544A-1-24V
TC303AX
TC244AX
TC533AX
TC244AX-24V
DTC204A-2
TC344AX
DTC324A-2
Supply Voltage
Output 2
85-270V
AC/DC
Relay
24V
AC/DC
TC344AX-24V
Dimensions
Diagram B
Diagram A
45
48
48
Front bezel
46
46
100
Side view
10
68
72
72
Front bezel
Panel Cutout
115
10
Diagram D
92
91
99
Front bezel
Diagram E
Models
DIM
75
74.5
3.5
71
Panel Cutout
Side view
Diagram F
Panel Cutout
F
91
97.5
G
C
E
Front bezel
Panel Cutout
D
B
28 29
Panel Cutout
Side view
A
33
92
104.5
9.5
69
Panel Cutout
Side view
Diagram C
99
69
A
B
C
D
E
F
G
U
50
97.5
88
45
10
46
92
V
50
98
76
45
3
46
92
50
10
88
92
46
All sizes mentioned are in mm unless specified otherwise. Specifications are subject to change without prior notice.
For more information visit us at
www.selec.com
Creating Best Value
Selec Controls Pvt. Ltd. (An ISO 9001:2008 Company)
EL-27/1, Electronic Zone,
TTC Industrial Area,
MIDC, Mahape,
Navi Mumbai 400710,
INDIA,
Sales Office:
E-121, Ansa Industrial Estate,
Saki Vihar Road, Andheri (E),
Mumbai 400 072. INDIA
Tel.: +91-22-4039 4200/4202
Fax: +91-22-2847 1733
Tollfree: 1800 227353 (BSNL/MTNL only)
Email: sales@selec.com,
Selec Controls USA., Inc.:
203 main Street # 205
Flemington,
NJ 08822, U.S.A.
Phone: 908-627-2149,
Fax: 732-960-8611,
Email: usa@selec.com,
Web: www.selecusa.com
Selec GmbH :
Mollwitzstrasse 2,
D-14059, Berlin,
Tel: +49 3030111870,
Fax.: +49 303011187-77,
Email: europe@selec.com
Web: www.selec-europe.com
SELEC/TEMP_CONTROLLER/140313
Factory:
Authorised Agent: