DATASHEET /6
CHROMAFLOOD 200 RGB
Features
■ 256 levels of Red, Green, and Blue individually
controllable, giving 16.7 million possible colours.
■ Continuous, smooth current through the LEDs giving
flicker-free, soothing light.
■ Long LED life expectancy of 25,000 hours at full power
white, increasing to 100,000 hours in typical use.
■ Built-in Power Supply and Controller with two Effects
Applications
■ Building facades.
■ Concerts.
Generators allows either DMX remote control or stand-
■ Television.
alone use. ■ Theatre.
■ Waterproof to IP65, and so suitable for either indoor or
outdoor use.
■ A variety of lens options provide different beam angles.
■ Themed environments.
■ Water features.
■ Decorative displays.
PULSAR| Pulsar Light of Cambridge Ltd: 3 Coldhams Business Park, Norman Way, Cambridge, CB1 3LH, UK
| Web: www.pulsarlight.com | Email: sales@pulsarlight.com | Tel: +44 (0)1223 403500
Reference: CFLD200RGB
Issue: November 2007/1
DATASHEET /6
CHROMAFLOOD 200 RGB
Technical specification
ELECTRICAL
LIGHT SOURCE
Power
22 x 1W Red, 22 x 3W Green and 22 x 3W
Royal Blue, High Power, High Efficiency
LEDs.
85-240 Volts AC 200 Watts max,
50-60Hz, self adjusting.
Power cable
Power: 5m (16.4’) captive.
Life
Expected LED life of 25,000 hours at full
power white (100,000 hours with normal
colour changing usage).
Data connectors
Data 2 x 5-pin XLR (1 x M + 1 x F).
Data cable
2 x 5m (16.4’) captive.
Light Output
Visible spectrum only – produces no
infra-red or ultra-violet light which can
heat or fade objects.
Beam Angles
8°, 25°, 45°, 12x25° and 10x90° lenses
specified with order or using the
interchangeable lens plates.
Flicker Free
Continuous drive electronics ensures a
smooth, flicker-free, soothing light. We
do not compromise on this, and do not
use Pulse Width Modulation (PWM) which
strobes the LEDs at high frequency and
can produce a stressful, agitating light.
LEDs
CONTROL
Colours
256 levels of Red, Green and Blue = 16.7
million colours.
Sequences
Built-in ChromaZone Effects Generator
provides a wide range of chases and
sequences, for superb lighting effects
without complicated programming.
Control input
DMX 512 to allow full remote control
of intensity levels, or to select effects
from the built-in ChromaZone Effects
Generator.
LCD menu system
OPERATING CONDITIONS
Temperature
-20°C to +50°C.
Cooling
The fixture is convection cooled using
the body of the fixture as a substantial
heatsink. Above a threshold temperature,
a thermal management control system
smoothly reduces the power to protect
the LEDs and the internal electronics
from excessive temperatures.
Environment rating Wet conditions – IP65.
OPTIONS
Product Code
CFLD200-FL
F= Body Finish: B= Black, S=Silver,
W=White
L= Lens Type: 8, 25, 45, 12x25, 10x90
Accessories
CFLD200-8LP Lens Plate 8°
CFLD200-25LP Lens Plate 25°
CFLD200-45LP Lens Plate 45°
CFLD200-12x25LP Lens Plate 12x25°
CFLD200-10x90LP Lens Plate 10x90°
Related products
CFLD200TC-FL
Tri-Colour LED version, with 66 x 3W Red/
Green/Blue Tri-Colour LEDs. As the colour
mixing occurs within the device this
eliminates multi-colour shadows and is
ideal if the fixture can be viewed directly.
CFLD200VW-FL
Variable White version, with 44 x 3W Cool
White + (8 x 1W Amber, 6 x 1W Red, 8 x
3W Green). Provides the ability to warm
the light output in a controllable fashion.
For quick fixture configuration allowing
operation without a separate control
system.
PHYSICAL
Finish
Black or Silver (special colours available
on request).
Mounting
The fixture can be floor, wall or truss
mounted using the brackets supplied. Once mounted the fixture can be
adjusted to a selected angle.
Dimensions
321 (W) x 336 (H) x 118mm (D)
(12.6 x 13.2 x 4.6”)
Weight
7.8 Kg (17.1 lbs).
Pack Dimensions
410 x 410 x 280mm
(16.1 x 16.1 x 11”).
Pack Weight
9.1 Kg (20 lbs).
CFLD200RGBVW-FL 11 x 1W Red, 11 x 3W Green, 11 x 3W
Royal Blue, 22 x 3W Cool White, 11 x
1W Amber. Excellent for achieving fine
gradations of pastel colours and skin
tones, making it ideal for theatrical and
stage use.
CFLD100-FL
100W version of the CFLD-200 with 10
x 1W Red, 12 x 3W Green and 10 x 3W
Royal Blue LEDs.
CFLD100TC-FL
100W version of the CFLD200TC with 32 x
3W Red/Green/Blue Tri-Colour LEDs.
CFLD100VW-FL
100W version of the CFLD200VW with 22
x 3W Cool White + 10 x 1W Amber LEDs.
PULSAR| Pulsar Light of Cambridge Ltd: 3 Coldhams Business Park, Norman Way, Cambridge, CB1 3LH, UK
| Web: www.pulsarlight.com | Email: sales@pulsarlight.com | Tel: +44 (0)1223 403500
Reference: CFLD200RGB
Issue: November 2007/1
DATASHEET /6
CHROMAFLOOD 200 RGB
Physical dimensions
Side view
Rear view
373mm/14.68"
321mm/12.64"
0°
182.5mm/
7.19"
45°
291mm/
11.45"
75°
118mm/
4.65"
190mm/
7.48"
291mm/11.45"
LAMP MATRIX DIMENSIONS
TOP view
M10 fixing bolt locations in hangers
70mm/2.76"
70mm/2.76"
Outer hanger
Inner hanger
Body
321mm/
12.6"
Inner hanger
Washer
Washer
Outer hanger
336mm/
13.2"
Washer
Washer
118mm/
4.6"
Standards
The Pulsar ChromaFlood complies with the following
International and National Standards:
Guarantee
Electrical Safety
IEC65, EN60065, BS415
EMC
EN50081-1, EN55022, EN50082-1
guarantee is limited to parts and labour. The guarantee is
EEC Directives
void if the unit is misused, the cable connections are not in
Index of Protection IP65
ANSI/UL Conformity
Marking: 93/68/EEC
EMC: 89/336/EEC
Low Voltage: 73/23/EEC
12 months from the date of original purchase. The
a dry environment or unauthorised persons perform repairs. In the unlikely event of a fault occurring, do not use without
repair. Return the unit to your supplier with a description of
the fault, or direct to Pulsar for immediate attention.
CAN/CSA Certification
PULSAR| Pulsar Light of Cambridge Ltd: 3 Coldhams Business Park, Norman Way, Cambridge, CB1 3LH, UK
| Web: www.pulsarlight.com | Email: sales@pulsarlight.com | Tel: +44 (0)1223 403500
Reference: CFLD200RGB
Issue: November 2007/1
DATASHEET /6
CHROMAFLOOD 200 RGB
Distribution
Illuminance distribution (white) at 1m on axis
12000
10000
8000
lux
6000
4000
1.00
0.33
m
-0.33
2000
-1.00
m
1.00
0.66
0.33
0.00
-0.33
-0.66
-1.00
0
PHOTOMETRIC DATA
Pulsar CHROMAFLOOD200 Source Details
Front Filter: Safety glass with soft diffusion
LED Source: 66 LEDs (22 1W Red, 22 3W Green, 22 3W Royal Blue)
Lenses:
8 degrees
Footcandle
Pulsar ChromaFlood200 Illuminance Distribution (White) at 1m on axis
Lux
feet
-3
m
3
-2
-1.00
1
1
1.00
2
0.33
0
22
3
0.00
-1
28
2
26
2
17
1
44
2
11
17
25
38
41
2
24
20
1
25
1
28
21
2
2
57
3
52
144
4
19
2
4
826
5
27
2
-1.00
162
4
41
948
13
12
2
5
10300
77
46
3
-0.66
-3
1230
15
22
272
88
8
1
4
679
957
65
4
-0.33
-2
345
114
12
51
25
1.00
1
2
90
63
49
6
18
5
56
32
3
0.66
1
22
8
25
5
2
0.33
2
19
5
14
2
1
0.00
2
13
2
0.66
0
-0.33
2
8
1
1
-1
-0.66
15
1
15
10
Footcandle
Pulsar ChromaFlood200 Illuminance on axis
Lux
3'
6'
9'
1m
White
Red
Green
Blue (Royal )
957
10300
223
3040
7550
20
1410
2210
809
1021
138
35
580
1
27
530
13
210
54
3
58
5m
49
20
362
95
5
210
4m
75
34
772
205
15'
3m
131
72
2400
702
12'
2m
283
381
1
16
10
PULSAR| Pulsar Light of Cambridge Ltd: 3 Coldhams Business Park, Norman Way, Cambridge, CB1 3LH, UK
| Web: www.pulsarlight.com | Email: sales@pulsarlight.com | Tel: +44 (0)1223 403500
Reference: CFLD200RGB
Issue: November 2007/1
DATASHEET /6
CHROMAFLOOD 200 RGB
Control
SETUP
The ChromaFlood 200 provides the following menus:
■ DMX Address (1 to 512)
■ ChromaZone Mode (3, 6, 9, 10, 36, 42, 46 channels)
■ Channels per Fixture (3/6)
■ Fixture Number (1-12)
■ Chase patterns (6/12)
The ChromaFlood 200 provides direct control of the red,
■ Channel 10 (Grand Master options)
green, and blue levels of the LEDs to a value between 0 and
■ Input Smoothing (Smooth/Fast)
255, giving over 16.7 million possible colours.
■ Low Voltage Supply (On/Off )
It also incorporates a built-in ChromaZone controller, which
can be programmed to sequence the fixture through a
wide range of alternative colour changes and sequences.
■ DMX Line Termination (On/Off )
■ If NoSignal use (Stand Alone Mode/Last DMX packet)
■ Stand Alone Settings View/Change
■ View (Sig)/Set (No Sig) Channel Levels
The ChromaFlood 200 can be programmed using a
■ Restore Factory Default Settings
standard external DMX signal, such as from a lighting desk. CHASE OPTIONS
Alternatively it can be set up directly via the 6-key keypad
and LCD display on the back panel of the unit, allowing it to
The following predefined chase options are provided:
be used stand-alone without needing to be connected to
■ Auto chase
an external DMX controller.
■ Green yellow red bar graph forward/reverse
ChromaZone features
Up to 12 ChromaFlood 200 units can be programmed to
operate in synchrony, without any interconnection needed
between the units, to give changing effects that appear to
sweep across the units; these are called ‘chases’. To achieve
a chase each unit is programmed with the same chase
settings, but a different fixture number. Applying power
simultaneously to all units will then initiate the correct
chase sequence across all units.
Up to two chases, with different effects and timings, can
■ Rainbow strobe
■ White/any colour strobe
■ White/any colour crossover
■ Blue-yellow wave forward/reverse
■ Green-magenta wave forward/reverse
■ Red-cyan/any colour /opposite colour wave forward/
reverse
■ Black-white/any colour wave forward/reverse
■ Random colours. Chase1 crossfades, chase2 snaps
■ Rainbow 2 (wider primary colours) crossfade forward/
reverse
be programmed simultaneously. The two chases may be
■ Rainbow crossfade forward/reverse
superimposed to give a composite effect. For example, a
■ Follow3 18 contrasting colours forward/reverse
rainbow wave could be superimposed on a gradual colour
■ 18 crossfading colours forward/reverse
change.
■ White/any colour/auto colour cascade forward/reverse
A master dimmer channel (Ch.10) is provided for the 36
individual RGB channels, which may become a global grand
master for the All R/G/B and Chases levels too.
■ 6 crossfading pastel colours
■ Colour wipes
■ 6 crossfading colours
■ 6 separate colours
■ Red green blue bar graphs forward/reverse
■ No chase
PULSAR| Pulsar Light of Cambridge Ltd: 3 Coldhams Business Park, Norman Way, Cambridge, CB1 3LH, UK
| Web: www.pulsarlight.com | Email: sales@pulsarlight.com | Tel: +44 (0)1223 403500
Reference: CFLD200RGB
Issue: November 2007/1
DATASHEET /6
CHROMAFLOOD 200 RGB
Architectural specification
Overview
■ The product shall be a high power IP65 LED fixture that
contains 66 LEDs, in a combination of RGB (1W Red &
3W Green & Royal Blue devices), calibrated to produce
white light whilst using 3 controllable clusters within
the product and capable of projecting a wash of light in
any colour by mixing the level of outputs from the Red,
Green & Royal Blue LEDs..
LIGHT SOURCE
■ The product shall employ continuous drive electronics
using direct current to the LEDs to produce a flicker-free,
PHYSICAL
■ The product shall be supplied with mounting brackets
enabling it to be floor, wall or truss mounted, and
adjusted to a selected angle. ELECTRICAL
■ The product shall possess a switched mode power
supply that features automatic voltage selection for the
electronics between 85-240 volts AC and between
50-60 Hz.
■ The product shall provide a mains voltage connection
via a 5m trailing cable. smooth, soothing light and shall not use Pulse Width
Operating conditions
Modulation (PWM) which strobes the LEDs at high
■ The product shall be convection cooled using the
frequency, and which can produce a stressful, agitating
body of the product as a substantial heatsink. Above a
light.
threshold temperature, a thermal management control
■ The product shall be available with a range of integrated
lenses to obtain beam angles of 8, 25, 45, 12 x 25 or
10 x 90 degrees, and these should also be available as
optional lens plates.
Control
system shall smoothly reduce the power to protect
the LEDs and the internal electronics from excessive
temperatures.
■ The product enclosure shall be rated with the IP rating
of IP65.
■ The product shall incorporate in-built stand-alone
programs that will vary the chase type, pattern and
speed.
■ The product shall allow control from a DMX source to
enable the user to access the in-built programs and to
change the colour of the output. ■ The DMX connection shall be made by two trailing 5
meter cables fitted with a 5-pin XLR plug and socket.
■ The DMX input shall be protected from static and
accidental connection to mains voltages, present
only 1/20th of a unit load to the DMX line, and have a
common mode range >200V. ■ The DMX start address shall be set by the User Interface
Module. Data conditions shall also be displayed via the
User Interface Module. PULSAR| Pulsar Light of Cambridge Ltd: 3 Coldhams Business Park, Norman Way, Cambridge, CB1 3LH, UK
| Web: www.pulsarlight.com | Email: sales@pulsarlight.com | Tel: +44 (0)1223 403500
Reference: CFLD200RGB
Issue: November 2007/1