Part No. Z1-005-300, IB023371 Nov 2011 Instruction manual AC Multi Outlet Cable OT02-KPM This AC multi outlet cable is connected to the KPM series for use. It enables you to measure the EUT just by connecting the EUT to the outlet. This makes it easy to wire the measurement circuit. Before using this outlet cable, thoroughly read the user's manual of the KPM series. Packing list When you receive the product, check that all accessories are included and that the accessories have not been damaged during transportation. If any of the accessories are damaged or missing, contact your Kikusui agent or distributor. Item Quantity AC multi outlet cable 1 Instruction manual (this manual) 1 China RoHS sheet 1 Names, functions and dimensions Multi outlet 40 Wire with crimping terminal (red and white) 7.5 7.5 235 250 Approx. 1200 SENSING switch Select the measurement circuit. 90 OUTPUT switch You can use this to turn the multi outlet output on and off. Wire with a safety terminal adapter (red and black) Hole for fixing the cable in place 4-φ5 9.5 59 9.5 AC inlet A OUTPUT 250V 15A OUTPUT ON/OFF WARNING㆙࿌ B AC INPUT 250V 15A OT02-KPM ࣭TO AVOID AN ELECTRIC SHOCK,THE MAINS SUPPLY CORD PROTECTIVE GROUNDING CONDUCTOR MUST BE CONNECTED TO AN ELECTRICAL GROUND. ࣭THIS OUTLET STRIP MUST BE CONNECTED TO AN AC POWER SUPPLY’S OUTPUT. ࣭ឤ㟁ᨾ㜵Ṇࡢࡓࡵࠊ㟁※ࢥ࣮ࢻࡢGND⥺ࢆ NB00591-1 ࠉ☜ᐇ᥋ᆅࡋ࡚ࡈ⏝ࡃࡔࡉ࠸ࠋ ࣭ὶ㟁※⨨ࡢฟຊ᥋⥆ࡋ࡚⏝ࡋ࡚ࡃࡔࡉ࠸ࠋ KIKUSUI ELECTRONICS CORP. MADE IN JAPAN G N L OUTPUT ON/OFF A OUTPUT VOLTAGE U(RED) + (BLACK) - B A OUTPUT SENSING KPM A AC INPUT L N G SENSING CURRENT I (RED) + - (WHITE) B AC INPUT B This indicates how the measurement circuit switches according to the position of the SENSING switch. Magnet Unit: mm Connection The illustration below shows how to connect the cable to the KPM1000. For information on the connection terminals of other KPM series units, see the appropriate user's manual. WARNING Risk of electric shock. • Before you connect the cable to a KPM series, turn off the AC power supply that you are using. • Use a three-core power cord, and be sure to ground it. A power cord for connecting to the AC power supply is not included. Obtain a power cord that has a plug that is the correct shape and that supports the appropriate rated voltage and rated current. Voltage input terminals terminal KPM1000 Connection example, KPM1000 U terminal Current input terminals terminal I terminal Be sure to attach the terminal cover. Wire with crimping terminal (red) Be sure to connect this to the output of the AC power supply. Do not connect this directly to the outlet of a commercial AC line. Wire with crimping terminal (white) A PUT OUT V 15A UT 250 TP A OU OT 0 UT OUTPFF ON/O B UT AC INP V 15A 250 PM 2 -K D COR TED PLY SUP CONNEC MAINS T BE CK,THETOR MUS IC SHO DUC CTR ING CON ELE TED 91-1 ID AN GROUND UND. NEC AVO CON . NB005 ࣭TO ECTIVE ICAL GRO T BE PUT MUS PROT ELECTRSTRIP PLY’S OUT ⥺ࢆ AN GND TO OUTLET ER SUPࢥ࣮ࢻࡢ ࠋ IS JAPAN ࡉ࠸ ࣭TH AN AC POWࡵࠊ㟁※ࡉ࠸ࠋ E IN ࡃࡔ ࡋ࡚ ࡢࡓ MAD ࡃࡔ ⏝ TO ᨾ㜵Ṇ P. ⏝ ࡋ࡚ ࡚ࡈ COR ᥋⥆ ࣭ឤ㟁᥋ᆅࡋ ຊ ONICS ࡢฟ CTR ࠉ☜ᐇ㟁※⨨ ELE ࣭ὶ KIKUSUI NING WAR ㆙࿌ T L G N OUTPU A T OUTPUF ON/OF UT AC INP L N G B KPM SING SEN GE VOLTA ) U(RED K) AC + - (BL ENT CURR D) I (RE ) ITE + - (WH ING SENS UT AC INP B Use a power cord that meets the rated voltage and rated current of the EUT that you will connect to the multi outlet. Wire with a safety terminal adapter (red) Wire with a safety terminal adapter (black) Measurement circuit selection (SENSING switch selection) Depending on the measured current or measured voltage, the power meter's measured results may be affected by input impedance. To minimize the power loss, use the SENSING switch to select the appropriate measurement circuit. The power loss that occurs during power measurement varies depending on the model. For details, see the user's manual for the appropriate KPM series. ± I • To measure a large current, select measurement circuit A. • To measure minute power, such as standby power, select measurement circuit B. r r AC power supply L U Load L AC power supply L U I ± Load L R R N N N ± Equivalent circuit of the power meter when measurement circuit A is selected N ± r: Ammeter input impedance R: Voltmeter input impedance Equivalent circuit of the power meter when measurement circuit B is selected Connections to the multi outlet The plugs that can be connected to the multi outlet are shown in the following table. WARNING Risk of electric shock. Do not use voltage or current exceeding the rated value (250 V and 15 A) of multi outlet. Connectable plugs and their ratings (excerpt from the WCF5901 catalog by Panasonic Electric Works, Ltd.) Country/Region Standard Japan United States Canada JIS UL CSA Plug type Plug ratings 2-pin 15 A, 125 V SEV Italy CEI Plug type Europe Plug ratings 2-pin 2.5 A, 250 V 2-pin 10/16 A*1, 250V 2-pin with ground CEE DIN 10/16 A*1, 250 V, and earth on the side 2-pin with ground 2-pin 7.5 A, 250 V AS Switzerland Standard 2-pin with ground 15 A, 125 V 2-pin 10 A, 250 V Australia Country/Region 2-pin with ground 10 A, 250 V 10/16 A*1, 250 V, and earth on both sides 2-pin 5 A, 250 V 2-pin with ground 15 A, 250 V 2-pin with ground 5 A, 250 V 2-pin 10 A, 250 V 2-pin with ground 10 A, 250 V 2-pin with ground 10 A, 250 V United Kingdom BS 2-pin with ground 15 A, 250 V 2-pin with ground 13 A, 250 V *1. The rated current of the multi outlet is 15 A. It cannot be used when exceeding the rated current. Specifications Specification Item Specification Maximum operating voltage 250 Vac Withstand voltage Maximum operating current 15 Aac Between the AC input and the chassis: 1500 Vac for 1 minute Insulation resistance Between the AC input and the chassis at 500 Vdc: 100 MΩ or higher Item Environmental conditions Installation location Indoors, Overvoltage category I Altitude 2000 m or less Operating temperature and humidity ranges 0 °C to +40 °C, 20 %rh to 80 %rh (no condensation) Storage temperature and humidity ranges -20 °C to +70 °C, 90 %rh or less (no condensation) Earth continuity 0.1 Ω or less at 25 Aac Cable Length Approx. 1.2 m Input terminal (inlet) IEC 60320 C14 (UL) Applicable socket IEC 60320 C13, C15 Weight Approx. 1.0 kg KIKUSUI ELECTRONICS CORP. 1-1-3, Higashiyamata, Tsuzuki-ku, Yokohama, 224-0023, Japan TEL : +81-45-593-7570 Fax : +81-45-593-7571 Website http://www.kikusui.co.jp/en