





Not intended for use with emergency exit fixtures or emergency lighting.
Risk of electric shock or burns. Turn power off and let cool before inspection or replacement.
Do not open – no user serviceable parts inside. Use only on 120 volt AC circuits.
Do not use if product is cracked, broken or missing, even if lamp continues to light.
Suitable for use in operating environments between -25°C and +45°C (-13°F and +113°F).
Suitable for damp locations, but not for use where exposed directly to weather or water.
Do not use in enclosed fixtures or recessed cans.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Applicable Product Model Numbers:





SA19-04627MDFD-12DE26-1
SA19-04650MDFD-12DE26-1
SA19-08127MDFD-12DE26-1
SA19-08150MDFD-12DE26-1
SA19-11027MDFD-12DE26-1




SA19-11050MDFD-12DE26-1
SA21-16027MDFD-12DE26-1
SA21-16050MDFD-12DE26-1
SA21-16027MDFD-12WE26-1





Not intended for use with emergency exit fixtures or emergency lighting.
Risk of electric shock or burns. Turn power off and let cool before inspection or replacement.
Do not open – no user serviceable parts inside. Use only on 120 volt AC circuits.
Do not use if product is cracked, broken or missing, even if lamp continues to light.
Suitable for use in operating environments ranging between -25°C and +45°C (-13°F and
+113°F). Lifetime may be reduced if used in air tight enclosures or in insulated ceiling air
tight (ICAT) recessed down light enclosures.
Suitable for damp locations, but not for use where exposed directly to weather or water.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Applicable Product Model Numbers:


SBR30-06527FLFD-12DE26-1
SBR30-06550FLFD-12DE26-1






Not intended for use with emergency exit fixtures or emergency lighting.
Risk of electric shock or burns. Turn power off and let cool before inspection or replacement.
Do not open – no user serviceable parts inside. Use only on 120 volt AC circuits.
Do not use if product is cracked, broken or missing, even if lamp continues to light.
Suitable for use in operating environments between -25°C and +45°C (-13°F and +113°F).
Suitable for damp locations, but not for use where exposed directly to weather or water.
Do not use in enclosed fixtures or recessed cans.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Applicable Product Model Numbers:


SB13-02427MDCH-12GE12-1
SB13-03427MDCH-12GE12-1





Not intended for use with emergency exit fixtures or emergency lighting.
Risk of electric shock or burns. Turn power off and let cool before inspection or replacement.
Do not open – no user serviceable parts inside. Use only on 120 volt AC circuits.
Do not use if product is cracked, broken or missing, even if lamp continues to light.
Suitable for use in operating environments ranging between -35°C and +45°C (-31°F and
+113°F). Lifetime may be reduced if used in air tight enclosures or in insulated ceiling air
tight (ICAT) recessed down light enclosures.
Suitable for wet locations where exposed directly to weather.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Applicable Product Model Numbers:


SPAR38-1503045TD-12DE26-1
SPAR38-1503025TD-12DE26-1