Hazardous Area Equipment
Customised and IECEx certified hazardous area solutions from NHPEx
ENCLOSURES
HAZARDOUS
& CLIMATE
AREACONTROL
EQUIPMENT
Ex
NHP Electrical Engineering Products Pty Ltd
Sales 1300 NHP NHP
Sales 0800 NHP NHP
nhp.com.au
nhp-nz.com
Our Australian Hazardous Area Certified
assembly workshop
HAE CERTIFIED IECEx WORKSHOP
NHP supplies not only the Cortem range
of hazardous area equipment, but equally
important, customer specific systems via our
assembly workshop located at our National
Distribution and Manufacturing Centre in
Melbourne. In this workshop, accredited staff
design, construct and inspect the Cortem
range according to the requirements of IECEx
certification. It allows for flexibility to produce
custom solutions to suit your HAE requirements
including:
• Specialist lighting requirements
• Control stations (including custom orders)
• Terminal boxes (including custom orders)
• Full panel design and construction (in both
Ex d and Ex de technologies)
The NHPEx workshop enables both expeditious
and effective solutions for customers and
operates under stringent quality assurance
guidelines.
NON-HAZARDOUS MANUFACTURING
AND WAREHOUSING FACILITY
Our 12,000 m2 Manufacturing and Warehousing
facility offers both custom Ex and non-Ex
solutions and is supported by impressive
inventory management technologies and
state-of-the-art warehousing.
• The manufacturing centre assembles standard
Ex and non-Ex products as well as customised
solutions in accordance with customer
specifications
• Hundreds of units are despatched each day for
delivery throughout Australia
• The flexibility of our manufacturing process
emphasises customer focus
• The climate controlled facility is home to
over 75 workshop staff and 44 store people,
ranging from highly technical Ex competency
trained personnel, electrical trade assistants to
trained instrument technicians
• With 5,000 m2 of manufacturing floor space
containing 19 separate work centres, NHP can
assemble:
- Power factor correction panels (PFC)
- Distribution boards
- Motor control
- Variable speed drives (VSD)
- Liquid resistance starters up to 12.5 mW
- Air circuit breakers (ACB)
- Control stations (to customer order)
Customised distribuition panel
Scan the
QR code to
view the HAE
workshop
Tour brochure
HAZARDOUS AREA EQUIPMENT
Index
INTRODUCTION
ii - v
SECTION 1: LIGHTING
Safety/Interlock switches
Zinc die cast - EEx AZ and EEx 335 AZ Series
4 - 14
Selection chart
1-2
Solenoid interlock - EEx AZM/AZP 415 Series
4 - 16
Polycarbonate fluorescent lighting - EXEL Series
1-4
Thermoplastic - EEx ST 14 Series
4 - 17
Polycarbonate fluorescent lighting - EXEN Series
1-6
Boroscilicate glass fluorescent lighting - FLFE Series
1-8
Pull-wire switches
Zinc die cast emergency - EEx ZS 80 Series
4 - 18
Emergency exit lighting - EXEL, EXEN, FLFE Series
1 - 10
Zinc die cast - EEx ZS Series
4 - 19
Pendant lighting fixtures - EVE, EWE, EWAE Series
1 - 12
Aluminium emergency - EX 5540 Series
4 - 22
Floodlights - TIGER Series
1 - 16
Rectangular floodlights - SLEE Series
1 - 17
LED floodlights - EWL Series
1 - 18
SECTION 2: FLAME PROOF ENCLOSURES
2-2
HAE Certified IEC Ex workshop
2-3
Aluminium EJB Series
Equipment, control and terminal enclosures
2-4
Motor starters
2-6
Ex de Combinations
2-7
Stainless Steel EJBX Series
Equipment, control and terminal enclosures
4 - 23
EEx GFS Series
Belt Alignment Switches
4 - 24
EEx ZS Series
Selection chart
Equipment, control and terminal enclosures
Foot Switches
Safety Sensors
Thermoplastic rectangular - EEx RC Si 56
4 - 26
Nickel/Brass, stainless cyclndrical -EEx RC Si M30
4 - 27
EX Inductive Sensors
EEx IS Series
Magnetic Reed Switches
4 - 28
4 - 29
EEx RC M20 Series
SECTION 5: CABLE GLANDS AND ACCESSORIES
2-8
Aluminium CCA..E Series
Selection chart
5-2
Barrier cable glands for armoured cables - PX2KW Series
5-3
Equipment and Terminal enclosures
2 - 10
Barrier cable glands for non-armoured cables - PXSS2K Series
5-4
Equipment, control and terminal enclosures
2 - 11
Cable glands for armoured cables - REVD Series
5-5
Cable glands for un-armoured cables - REV Series
5-6
Reducers and adaptors - RE Series
5-7
Plugs - PLG Series
5-8
5-9
Aluminium GUB Series
Equipment and terminal enclosures
2 - 12
Aluminium EFDC Series
Control stations
2 - 14
Locknuts, serrated washers and earth tags
Aluminium SFX Series
2 - 14
SECTION 6: TERMINALS
Junction boxes
2 - 15
Introduction
6-2
2 - 16
Selection chart
6-3
EX d command and control operators
SECTION 3: INCREASED SAFETY ENCLOSURES
TOPJOB®S Terminals - 2.5 mm2
6-4
Selection chart
3-2
TOPJOB®S Terminals - 4 mm
6-5
Aluminium junction boxes and control stations - SA Series
3-3
TOPJOB®S Terminals - 6 mm2
6-6
Stainless steel Junction boxes -SA…SS Series
3-5
TOPJOB®S Terminals - 10 mm2
6-7
GRP Junction boxes - SA…P Series
3-7
TOPJOB®S Terminals - 16 mm2
6-8
Standard control stations - SA/P/SS Series
3-9
TOPJOB®S Accessories
6-9
2
Ex e custom assembly request form
3 - 11
SECTION 7: INTRINSIC SAFETY EQUIPMENT
Ex e command and control operators
3 - 12
WAGO I/O Systems - 750 Series
7-2
intrinsically safe isolators - introduction
7-3
Intrinsically safe galvanic isolators -selection guide
7-4
SECTION 4: SWITCHING AND FIELD DEVICES
Selection chart
4-2
Plugs and sockets
SECTION 8: EX SIGNALLING
4-4
Beacons
8-2
4-6
Electronic sounders
8-3
CSC Series - 16 A
4-6
Status lights and sounder combination units
8-4
EFSCO Series - 25/63 A
4-7
Manual call point
8-5
PY/SPY Series
Isolators
Limit switches
Zinc die cast - EEx 335 Series
4-8
Thermoplastic - EEx T 356 Series
4 - 10
Thermoplastic - EEx 14 Series
4 - 12
i
SELECTION OF ELECTRICAL EQUIPMENT
In order to select electrical apparatus for use in hazardous
areas it is necessary to have the following information:
Typical hazardous area industries:
Dust
Gases and Vapours
1. Area classification
• Oil refineries and chemical plants • F ood manufacturing
2. Gas, vapour, mist or combustible dust group
• Offshore drilling rigs
•G
rain handling and storage
3. The “T” rating or the ignition temperature of the hazard
• Spray booths
•C
hemicals / fertiliser
• Sewerage treatment plants
• Plastics
• Oxygen and acetylene
• Wood / pulp / paper
1. Area Classification
• Aircraft hangers
•M
ilk powder
The areas are classified into ZONES, and these zones are
based on the frequency of the appearance of an explosive
atmosphere and the duration for which it can last.
• LNG plants
• F lour mills
• Wharves for petroleum
and LNG vessels
• Pharmaceuticals
• Paint manufacturers
•R
ecycling operations
4. The required IP rating of the apparatus
Summarised in the table below:
•M
etal processing
• Distilling
• F iberglass manufacturing
• Laboratory and fume cupboards • E xplosive factories
Dust
Gases and Vapours
Zone 0
Area in which an explosive gas-air mixture
is continuously present or present for long
periods.
(>1000 hours per year*)
Zone 20
Area in which an explosive dust-air mixture
is continuously present or present for long
periods.
(>1000 hours per year*)
Zone 1
Area in which an explosive gas-air mixture
is likely to occur for short periods in normal
operation.
( >10 <1000 hours per year*)
Zone 21
Combustible or conductive dusts are
present and are likely to occur for short
periods in normal operation.
( >10 <1000 hours per year*)
Zone 2
Area in which an explosive gas-air mixture
is not likely to occur, and if it occurs it will
only exist for a very short time due to an
abnormal condition.
(<10 hours per year*)
Zone 22
Area in which an explosive dust mixture
is not likely to occur, and if it occurs it will
only exist for a very short time due to an
abnormal condition.
(<10 hours per year*)
*Published figures to be used as a guide only.
2. Gas, vapour, mist or combustible dust group
Gases and vapours are divided into three groups:
Group I
Group II
Group III
Mining
Explosive Gas Atmosphere
Explosive Dust Atmosphere
Sub-Division
Ignition Energy
Sub-Division
Explosive
Atmosphere
IIA (eg: Propane)
260 Micro-joules
IIIA
Combustible
flyings
IIB (eg: Ethylene)
95 Micro-joules
IIIB
Non-conductive
dust
IIC (eg: Acetylene 18 Micro-joules
and Hydrogen)
IIIC
Conductive dust
M1
M2
The hazard level of the gases and dusts increases from gas groups IIA to IIC and dust groups IIIA to IIIC. The most severe in both cases
being IIC and IIIC.
ii
3. Temperature or “T” rating for explosive gas
atmospheres.
The source of ignition in a hazardous area can be an arc or a
spark or even a hot surface.
T Rating
Maximum Temperature
T1
450 ºC
T2
300 ºC
T3
200 ºC
T4
135 ºC
T5
100 ºC
T6
85 ºC
Since electrical equipment generates heat in normal operation
we need to ensure that a hot surface on electrical apparatus
cannot ignite a surrounding explosive gas atmosphere or a
dust cloud or layer.
All hazardous materials have what is known as an “Ignition
Temperature”, this is the minimum temperature at which the
hazardous material when mixed with air will ignite and sustain
combustion, without an ignition source (auto-ignition or
spontaneous ignition).
For explosive gas atmospheres a“T” rating is given as a T6 rated
product will not exceed 85 ºC and a T3 will not exceed 200 ºC
etc. while in service in hazardous area equipment for explosive
dust atmospheres are given a maximum surface temperature
rather than a “T” rating. This is so dust build up, or layers can be
accounted for via de-rating calculations
SELECTION OF TEMPERATURE RATING FOR HAZARDOUS DUSTS
Dusts pose additional problems when dealing with
temperature. Dust can settle on equipment and ledges to
form layers. Because of this we have to consider dusts in two
forms:
1) As a cloud mixed with air
2) As layers settled on surfaces
Dust as a cloud and dust in layers will have different ignition
temperatures and we need to consider the lowest of these
two.
Dust in the form of a layer on electrical equipment can impair
heat dissipation and cause increased temperatures to the
equipment.
Temperature increase as a result of layers could also cause the
dust to dry out and give rise to spontaneous combustion of
the dust in the layers.
On the other hand a disturbance of the dust would cause it to
rise and mix with air to form an explosive cloud.
a) For Dust Clouds
You must select equipment with a T rating that is two thirds
that of the ignition temperature of the dust hazard.
e.g. if the ignition temperature of the hazardous dust is 150 ºC
then the equipment T rating must not exceed 100 ºC or T5
b) For Dust Layers
You must select equipment with a T rating that is 75 ºC less
than the ignition temperature of a layer on the surface of the
equipment.
e.g. if the ignition temperature of the dust layer is 275 ºC then
the equipment T rating must not exceed 200 ºC or T3.
The thickness of dust layers is critical to the whole operation
and this is the main reason for good housekeeping. If the
layers are going to be more than 5 mm then testing must be
carried out on the individual hazardous dust at the specified
thickness to obtain the layer ignition temperature at that layer
thickness.
The pressure wave from a relatively small disturbance
and resultant explosion would give rise to a much larger
disturbance and probably a much larger and more damaging
explosion.
EQUIPMENT PROTECTION LEVELS (EPLs)
EPLs were introduced to Hazardous area classifications at the
same time optional risk assessments were introduced. Rather
than define the probability an explosive atmosphere will
exist (Hazardous Zones). EPLs consider the consequence of
an explosion, and are assigned a protection level based on its
ignition risk.
A risk based approach to Hazardous Area classification is used
to ensure that equipment manufactured for or installed in a
Hazardous area will not become a source of ignition, even in
a failed state.
HAE Catalogue > Introduction
iii
Equipment Protection Levels (EPLs)
During classification, a risked based approach of
consequences of an explosion, can be used to determine
if equipment used can be of a higher or lower level of
protection, beyond the nominally used zone/equipment
selection criteria.
Protection level
EPL Ga/Da: Equipment having a very high level of protection,
which will not act as a source of ignition in normal operation,
expected faults or when subject to rare faults.
EPL Gb/Db: Equipment having a high level of protection,
which will not act as a source of ignition in normal operation
or during expected faults.
EPL Gc/Dc: Equipment having an enhanced level of
protection which will not act as a source of ignition in normal
operation and reduce the likelihood of acting as an ignition
source during expected faults, e.g an indicator lamp failure.
Zone
EPL
Zone 0
Ga
Zone 20
Da
Zone 1
Gb
Zone 21
Db
Zone 2
Gc
Zone 22
Dc
Very High
High
Enhanced
4. The Ingress Protection or “IP” rating.
Ingress of moisture or other material could affect electrical equipment and cause it to break down electrically and possibly cause arcs
and sparks which could be possible sources of ignition.
For example Ex d or flameproof enclosures are not weatherproof in their own right and need to be rated for Ingress protection if they
are used outdoors. Other techniques such as Ex e increased safety must have a minimum of IP 54 but the ingress of moisture could
cause insulation breakdown which would be dangerous in hazardous areas.
TEST
iv
PROTECTION
TEST
PROTECTION
D
No test applied
No specific protection
D
No test applied
No specific protection
0
No test applied
Inherent degree of protection
0
No test applied
Inherent degree of protection
1
Protected against solid
objects larger than 50 mm
(e.g. accident contact with finger)
1
Protected against drops of water
falling vertically
2
Protected against solid
objects larger than 12 mm
(e.g. contact with finger)
2
Protected against drops of water
falling at up to 15 from the vertical
3
Protected against solid
objects larger than 12 mm
(e.g. contact with finger)
3
Protected against drops of water
falling at up to 60 from the vertical
4
Protected against solid
objects larger than 1 mm
(e.g. fine tools and wires)
4
Protected against splashing water
from all directions
5
Protected against dust. Prevent
entry in sufficient quantity to
interfere with satisfactory operation
5
Protected against jets of water
from all directions
6
Completely protected
against dust
6
Protected against jets of water
of similar force to heavy seas
7
Protection against the effects
of immersion
8
Protection against the effects
of submersion
TYPES OF PROTECTION FOR ELECTRICAL APPARATUS IN HAZARDOUS AREAS - EXAMPLES
Type of protection
Flame proof
enclosure
Ex d
Increased safety
Ex e
Intrinsic safety
Ex i
Non-sparking
Ex n
Protection by
enclosure
Ex tb
Diagram
Description
Standard
Ex d - “Flameproof Enclosure – type of protection
for electrical equipment in which the enclosure will
withstand an internal explosion of a flammable mixture
which has penetrated into the interior without suffering
damage and without causing ignition”.
IEC 60079-1
Ex e - “Increased safety – type of protection applied to
electrical equipment that does not produce arcs and
sparks in normal service in which additional measures
are applied so as to give increased security against the
possibility of excessive temperatures and the occurrence
of arcs and sparks”.
IEC 60079-7
Ex i - “Intrinsically safe circuit – a circuit in which any spark
or any thermal effect produced in the test conditions
prescribed in the standard (which include normal and
specified fault conditions) is INCAPABLE of causing
ignition of a given explosive atmosphere”.
IEC 60079-11
Ex n -“Type of Protection `n’ – type of protection applied
to electrical equipment such that, in normal operation,
it is not capable of igniting a surrounding explosive gas
atmosphere and a fault capable of causing ignition is not
likely to occur.”
IEC 60079-15
Ex tb - “An enclosure which excludes dust, and which will
not permit arcs, sparks or heat otherwise generated or
liberated inside the enclosure to cause ignition of exterior
accumulations or atmospheric suspensions of a specified
dust on or in the vicinity of the enclosure”.
IEC 61241-1
v
1
Lighting
Lighting
Selection chart 1-2
Polycarbonate fluorescent lighting – EXEL series
1-4
Polycarbonate fluorescent lighting – EXEN series
1-6
Boroscilicate glass flourescent lighting – FLFE series
1-8
Emergency exit lighting – EXEL, EXEN, FLFE series
1 - 10
Pendant lighting fixtures – EVE, EWE, EWAE series
1 - 12
Floodlights – TIGER series
1 - 16
Rectangular floodlights – SLEE series
1 - 17
LED floodlights – EWL series 1 - 18
PENDANT LIGHTING
FLOODLIGHTING
FLUORESCENT LIGHTING
1
Lighting
Selection chart
Lighting
Description
EXEL Series
Fluorescent
- 18 and 36 W
- Central locking with lamp
isolation on emergency version
- End of life switching off
- IP 66
- Standard and emergency
- Optional mounting methods
- Through wiring
EXEN Series
Fluorescent
- 18 and 36 W
- Central locking with lamp
isolation on emergency version
- End of life switching off
- IP 66
- Standard and emergency
- Optional mounting methods
- Through wiring
FLFE Series
Flourescent
- 18, 36 and 58 W
- Toughened borosilicate glass
- Aluminium alloy heads
- IP66
- Standard and emergency
- Optional mounting methods
- LED option
Emergency exit lighting Series
Exit straight
Exit left
Exit right
Protection
Technique
Zone 1
Zone 2
Zone 21
Zone 22
Group
Ex ed
Ex tb
3
3
3
3
IIC
IIIC
Ex nA
Ex tb
–
3
3
3
IIC
IIIC
Ex de
EX tb
3
3
3
3
IIC
Ex de
3
3
3
3
IIC
3
3
3
3
IIC
IIIC
EVE, EWE, EWAE Series
Ex ed
Well Glass - HID - 20 to 400 W
Ex tb
- Marine grade aluminium
- Toughened borosilicate glass lens
- Ex e termination chamber allows
for simple cabling
- Optional reflectors
- LED option
1-2
1
Lighting
Selection chart
SLEE Series
Floodlight
- 150, 250 and 400 W
- Copper-free aluminium body
- Tempered glass cover
- IP 65/66
- Different lamp optionss
EWL Series
LED Floodlight
- 40, 65 and 180 W
- Lens options (10°, 20° and 40°)
- IP66
- Aluminium ring cover
- Toughened borosilicate glass
- LED plate
- Finned body for heat dissipation
Protection
Technique
Zone 1
Zone 2
Zone 21
Zone 22
Group
Ex nR
Ex tc
–
3
3
3
IIC
IIIC
Ex de
Ex tb
–
3
3
3
IIB
Ex de
Ex tb
3
3
3
3
IIC
IIIC
Lighting
Description
Tiger Series
Floodlight
- 150, 250 and 400 W
- Aluminium die-cast body
- Tempered glass cover
- IP66
- Different lamp options
1-3
1
Polycarbonate fluorescent lighting
EXEL Series
Lighting
Zones 1, 2 & 21, 22
IECEx CES 07.0001
Ex ed IIC T5
Ex tb T95ºC
IP 66
Ambient temp. / Temp. class / Max surface temp.
EXEL
–40ºC + 55ºC / T5/ 95ºC
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
Compact and bright
Low cost maintenance
Body in black antistatic GRP (Glass Reinforced Polyester)
VØ (UL 94) guaranteed self-extingushing and UV resistant transparent polycarbonate cup
Internal white powder coated aluminium frame
White internal reflector in PVC coated aluminium
Electronic ballast and safety switch
Suitable for chemically aggressive and extreme environments, such as marine
Standard power supply 230 V 50/60 Hz
EOL ballast (End Of Life)
Through wiring
Earth continuity plates on both ends
Vibration resistant tombstones
The emergency fluorescent range also features:
• Inverter, battery pack and signalling LED
Dimensions (mm)
Dimensions (mm)
18 W
A
A1
B
C
785
420
185
155
Light fitting
36 W
* M25 entries available on request.
1-4
1370
720
185
155
1
Polycarbonate fluorescent lighting
EXEL Series
M8BAR250
Ø20
Working
mode
Normal
Normal
Normal and
emergency
Normal and
emergency
No. of
lamps
2
2
Lamp
power
18 W
36 W
Temperature
class
T5
T5
Discharge
time (mm) Weight (kg) Cat. No.
5.5
EXEL-218 MAU
8.5
EXEL-236 MAU
2
18 W
T5
120
11.0
EXEL-218EF4AU
2
36 W
T5
90
14.5
EXEL-236EF4AU
Lighting
EXEL Series lighting fixtures
For exit lighting, see page 1 - 10.
Mounting accessory kits
GOF8
Description
M8 threaded bar
Eyebolt
Bracket type U
Bracket type D
Bracket type P
Details
Material: galvanised steel
Material: galvanised steel
Material: galvanised steel - ceiling mount
Material: galvanised steel - 45º wall mount
Material: galvanised steel - pole mount
Cat. No.
M8BAR250K
GOF-8K
G-244K
G-258K
G-0480K
* Kits include 2 brackets.
Accessories
G244
G258
Description
Transparent polycarbonate cup
Transparent polycarbonate diffuser
Internal white plasticised aluminium reflector
Internal white plasticised aluminium reflector
Lampholder
Safety switch
Fastening wrench
Plug with seal
Lock nut
Electronic ballast
Electronic ballast
Inverter
Battery pack
M20 cable gland
- Steel wired armour (brass)
M20 cable gland
- (brass)
Lamp power Details
18 W
36 W
18 W
36 W
G13
250 V 4 A
Ex de IIC T6
M20 x 1.5
M20 x 1.5
2 x 18 W
2 x 36 W
Ex e II IP 66/67
230 V ca (EXEL-…M)
230 V ca (EXEL-…M)
110/220 V 50/60 Hz
4 Ah
Cat. No.
B18-363
B36-363
B18-0213
B36-0213
G-0312E
SWITCH-EEXD
CLAFT10
HUM*
DL1IXEP
EB 218
EB 236
EI-58
G-0309B
REVD1IB
REV1IB
* Lamps not included
G0480
Note: Data sheet available on request.
1-5
1
Polycarbonate fluorescent lighting
EXEN series
Lighting
Zones 2 & 21, 22
IECEx CES 12.0010
Ex nA IIC T5/T4 Gc
Ex tb IIIC T65ºC to T85ºC Db
IP 66
Ambient temp. / Temp. class / Max surface temp.
–40ºC +40ºC / T5/ 65ºC
–40ºC +50ºC / T5/ 80ºC
–40ºC +55ºC / T4/ 85ºC
Features:
•
•
•
•
•
•
•
•
•
•
•
•
Compact and bright
Low cost maintenance
Black polyester resin body reinforced with UV-resistant glass fiber
VØ (UL 94) guaranteed self-extingushing and UV resistant transparent polycarbonate cup
Internal white powder coated aluminium frame
White internal reflector in PVC coated aluminium
Suitable for chemically aggressive and extreme environments, such as marine
Standard power supply 110/230 V 50/60 Hz
EOL ballast (End Of Life)
Through wiring
Earth continuity plates on both ends
Vibration resistant tombstones
The emergency fluorescent range also features:
• Inverter, battery pack and signalling LED
Dimensions (mm)
Dimensions (mm)
A
A1
B
C
18 W
785
420
185
155
Light fitting
36 W
1370
720
185
155
Note: M25 entries available on request.
1-6
1
Polycarbonate fluorescent lighting
EXEN series
M8BAR250
Ø20
Working
mode
Normal
Normal
Normal and
emergency
Normal and
emergency
No. of
lamps
2
2
Lamp
power
36 W
36 W
Temperature
class
T4/T5
T4/T5
Discharge
time (min)
-
Weight
(kg)
5.5
8.5
Cat. No.
EXEN-218AU
EXEN-236AU
2
18 W
T4/T5
120
11.0
EXEN-218EF4AU
2
36 W
T4/T5
90
14.5
EXEN-236EF4AU
Lighting
EXEN Series lighting fixtures
For exit lighting, see page 1 - 10.
Mounting accessory kits
GOF8
Description
M8 threaded bar
Eyebolt
Bracket type U
Bracket type D
Bracket type P
Details
Material: galvanised steel
Material: galvanised steel
Material: galvanised steel - Ceiling mount
Material: galvanised steel - 45º Wall mount
Material: galvanised steel- Pole mount
Cat. No.
M8BAR250K
GOF-8K
G-244K
G-258K
G-0480K
Lamp power
Cat. No.
* Kits include 2 brackets.
Accessories
G244
G258
G0480
Description
Transparent polycarbonate
cup
Transparent polycarbonate
diffuser
Internal white plasticised
aluminium reflector
Internal white plasticised
aluminium reflector
Lampholder
Fastening wrench
Plug with seal
Lock nut
Electronic ballast
Electronic ballast
Electronic inverter
Battery pack
M20 cable gland
- Steel wired armour (brass)
M20 cable gland
- (brass)
Details
18 W
B18-363
36 W
B36-363
18 W
B18-0213
36 W
B36-0213
G13
250 V 4 A
M20 x 1.5
M20 x 1.5
2 x 18 W
2 x 36 W
Ex e II IP 66/67
230 V 50/60 Hz
230 V 50/60 Hz
110/220 V 50/60 Hz
4 Ah
G-0312E
CLAFT10
HUM*
DL1IXEP
RT 4218
RT 4236
INVERTER
BATT4HA/D
REVD1IB
REV1IB
*Lamps not included
Note: Data sheet available on request.
1-7
1
Boroscilicate glass flourescent lighting
FLFE series
Lighting
Zones 1, 2 & 21, 22
IECEx CES 11.0021 issue 0
FLFE
Ex de IIC T6
Ex tb T70ºC to T80ºC
IP 66
Ambient temp. / Temp. class / Max surface temp.
–20ºC +40ºC / T6/ 70ºC
–20ºC +50ºC / T6/ 75ºC
–20ºC +55ºC / T6/ 80ºC
Features:
• Less wind resistance and less accumulation of dust
• Easy replacement of lamps
• Ex e internal terminal junction box which allows connection with an Ex e cable gland (not barrier)
• Power supply 230 V AC 50/60 Hz
• Shockproof borosilicate glass tube
•2 x 18 W, 2 x 36 W and 2 x 56 W models are also available in emergency versions
• Ceiling, wall and pole mounting options are available
• EOL ballast (End Of Life)
• LED version
• 24 V DC available
Dimensions (mm)
A
725
A1
640
B
135
C
190
Cat. No.
FLFE218
1325
1240
135
190
FLFE236
725
640
135
190
FLFE218EF4
1325
1240
135
190
FLFE236EF4
1325
1240
135
190
FLFE222L
* Lamps not included
Note: Data sheets available on request.
1-8
1
Boroscilicate glass flourescent lighting
FLFE series
Working mode
M8BAR250
Ø20
Lamp power Discharge Weight (kg)
time (min)
Cat. No.
Normal execution 230 V 50/60 Hz
2 x 18 W
-
5.7
FLFE218
Normal execution 230 V 50/60 Hz
2 x 36 W
-
9
FLFE236
230 V 50/60 Hz
2 x 18 W
120
6.8
FLFE218EF4
230 V 50/60 Hz
2 x 36 W
90
10.2
FLFE236EF4
230 V 50/60 Hz
2 x 22 W
-
9
FLFE2222L
Normal and
emergency
Normal and
emergency
LED
GOF8
Supply
Lighting
Lighting fixtures
For exit lighting, see page 1 - 10.
Mounting accessory kits
G244
Description
M8 threaded bar
Details
Material: galvanised steel
Cat. No.
M8BAR250K
Eyebolt
Material: galvanised steel
GOF-8K
Bracket type U
Material: galvanised steel - Ceiling mount
G-244K
Bracket type D
Material: galvanised steel - 45º Wall mount
G-258K
Bracket type P
M25 cable gland
- Steel wired armour (brass)
Material: galvanised steel- Pole mount
G-0480K
REVD21B
* Kits include 2 brackets.
G258
G0480
1-9
1
Emergency exit lighting
EXEL, EXEN, FLFE series
Lighting
Features:
• Exit stickers can be applied to the EXEL, EXEN and FLFE fluorescent lighting series fixtures
• Standard option allows for 24 metre viewing distance
• 16 metre viewing distance available on request
Exit straight
Exit straight
Zone
Series fixture
Watts
Discharge time (min)
Cat No.
1, 2, 21, 22
EXEL-218EF4
2 x 18 W
120
EXEL218EXIT24M
1, 2, 21, 22
EXEL-236EF4
2 x 36 W
90
EXEL236EXIT24M
1, 2, 21, 22
FLFE-218EF4
2 x 18 W
120
FLFE218EXIT24M
1, 2, 21, 22
FLFE-236EF4
2 x 36 W
90
FLFE236EXIT24M
2, 21, 22
EXEN-218EF4
2 x 18 W
120
EXEN218EXIT24M
2, 21, 22
EXEN-236EF4
2 x 36 W
90
EXEN236EXIT24M
Zone
1, 2, 21, 22
Series fixture
EXEL-218EF4
Watts
2 x 18 W
Discharge time (min) Cat No.
120
EXEL218EXITL24M
1, 2, 21, 22
EXEL-236EF4
2 x 36 W
90
EXEL236EXITL24M
1, 2, 21, 22
FLFE-218EF4
2 x 18 W
120
FLFE218EXITL24M
1, 2, 21, 22
FLFE-236EF4
2 x 36 W
90
FLFE236EXITL24M
2, 21, 22
EXEN-218EF4
2 x 18 W
120
EXEN218EXITL24M
2, 21, 22
EXEN-236EF4
2 x 36 W
90
EXEN236EXITL24M
Zone
Series fixture
Watts
Discharge time (min) Cat No.
1, 2, 21, 22
EXEL-218EF4
2 x 18 W
120
EXEL218EXITR24M
1, 2, 21, 22
EXEL-236EF4
2 x 36 W
90
EXEL236EXITR24M
1, 2, 21, 22
FLFE-218EF4
2 x 18 W
120
FLFE218EXITR24M
1, 2, 21, 22
FLFE-236EF4
2 x 36 W
90
FLFE236EXITR24M
2, 21, 22
EXEN-218EF4
2 x 18 W
120
EXEN218EXITR24M
2, 21, 22
EXEN-236EF4
2 x 36 W
90
EXEN236EXITR24M
Exit left
Exit left
Exit right
Exit right
* Lamps not included.
* Cat. No’s are for complete lighting fixture with exit sticker factory fitted.
1-10
Add value to your project with a solution from NHP.
At NHP we understand
that as the nature of
individual projects change,
so to do the needs of their
stakeholders. Working
together to drive long-term
results, NHP promises to
meet these requirements
on time and on budget.
Our consistent and coordinated
approach has the experience
to add value to your business
through engineered product
solutions that meet diverse
applications and reduce risk.
With locally based and expert
staff, the NHP Major Projects
team promises to provide active
support before and during the
lifetime of the project.
By their very nature, major
projects can often mean various
technical challenges that require
varied approaches.
Combat the scale, complexity
and lengthy development times
of major projects with a partner
you can trust.
NHP ELECTRICAL ENGINEERING PRODUCTS PTY LTD
EASY TO DO BUSINESS WITH
Sales 1300 NHP NHP | nhp.com.au |
HAE Catalogue > Section 1: Lighting > Pendant lighting fixtures – EVE, EWE, EWAE Series
1
Pendant lighting fixtures
EVE, series
Lighting
Zones 1, 2 & 21, 22
IECEx CES 07.0004
Ex d IIC T6 / T5 / T4 /T3 / T2
Ex de IIC T6 / T5 / T4 / T3 / T2
Ex tD A21 IP 66 T85ºC to T220ºC
Ambient temp. / Temp. class / Max surface temp.
–40ºC +40ºC / T5 / 65ºC
–40ºC +55ºC / T5 / 80ºC
–40ºC +60ºC / T4 / 85ºC
Features:
EVE
EVX...L
• LED version available with Remote Phosphor technology
• Pendant lighting fixtures
• Indoor and outdoor
• Indirect cable entry is allowed
• Aluminium alloy body with low copper content
• Internal/external stainless steel earth screw
• Borosilicate glass globe
• Stainless steel guard
• Wiring through silicone rubber cables resistant up to 200°C
• Neoprene seals resistant to acids and hydrocarbons
• RAL 7035 grey epoxy powder coating
• Standard power supply 230 V 50 Hz
EVE – Lighting fixtures for energy saving lamps
Lamp type
Halogen
Watt
70
Lamp holder
E 27
Temperature
class
T4
Max surface
temperature °C
124
Halogen
105
E 27
T3
154
Halogen
140
E 27
T3
154
Spiral tubes
15
E 27
T6
84
LED
8
N/A
T6
71
EVE_-5050L
Linear tubes
23
E 27
T5
86
EVE_-5060
LED
13
N/A
T6
74
EVE_-5060L
LED
19
N/A
T6
57
EVE_-5060L1
Mixed light
100
E 27
T3
172
Mixed light
160
E 27
T3
172
Linear tubes
33
E 27
T6
83
Mixed light
250
E 40
T3
166
Spiral tubes
42
E 27
T5
89
Linear tubes
75
E 27
T5
88
Linear tubes
105
E27
T5
91
Mixed light
500
E 40
T3
185
* Lamps not included
Note:
1-12
Cat. No.1)
) T o complete the Cat. No, add the mounting option from the following pages,
e.g. a halogen lighting fixture with a ceiling mount is EVEX-5050.
1
EVE_-5050
EVE_-5070
EVE_-5080
EVE_-50100
1
Pendant lighting fixtures
EVE series
Illustration
Mounting type
Cable entries
Cat. No.
Pendant
mounting
1x M25
EVEA
Pendant
mounting
with eyebolt
4x M25
EVEGC
Wall mounting with
30deg bracket
4x M25
EVEIX
Ceiling mounting
4x M25
EVX
Pendant mounting
(loop-in/loop-out)
3x M25
EVE
Ceiling mounting
(loop-in/loop-out)
2x M25
EVES
Lighting
Mounting Options
*Dimensions available in technical data sheets
1-13
1
Pendant lighting fixtures
EWAE series
Lighting
EWAE – Lighting fixtures for discharge lamps up to 400W
Lamp type
Sodium vapour
Watt
100
Lamp holder
E40
Temperature
class
T4
Max surface
temperature °C
132
Cat. No. 1)
EWAE_-5080N2
Sodium vapour
150
E40
T4
132
EWAE_-5080N4
Sodium vapour
250
E40
T3
159
EWAE_-5080N5
Sodium vapour
400
E40
T3
164
EWAE_-50100N6
Metal halide
100
E27
T4
130
EWAE_-5080IM2
Metal halide
150
E27
T4
130
EWAE_-5080IM4
Metal halide
250
E40
T3
180
EWAE_-5080IM5
Metal halide
400
E40
T3
163
EWAE_-50100IM6
Mercury vapour
250
E40
T3
148
EWAE_-5080F5
Mercury vapour
400
E40
T3
177
EWAE_-50100F6
Mounting Options
Illustration
Note:
1-14
Mounting type
Cable entries
Cat. No.
Pendant
mounting
(loop-in/loop-out)
3x M25
EWAE
Ceiling mounting
(loop-in/loop-out)
2x M25
EWAES
30DEG
Support bracket
(Galvanised steel)
Suits EWAES only
-
G-663
) To complete the Cat. No. add the mounting option from the following table, e.g. a sodium vapour lighting
fixture with a ceiling mount is EWAES-5080N2.
1
1
Pendant lighting fixtures
EVE, EWAE series
Description
Size
50
Reflector
60
70
80
100
Dome Reflector
50
60
70
80
100
30° Inclined Reflector
50
60
70
80
100
Details
White painted aluminium
Cat. No.
G50-427
Stainless steel
G50-427IN
White painted aluminium
G60-427
Stainless steel
G60-427IN
White painted aluminium
G70-427
Stainless steel
G70-427IN
White painted aluminium
G80-427
Stainless steel
G80-427IN
White painted aluminium
G100-427
Stainless steel
G100-427IN
White painted aluminium
G50-427D
Stainless steel
G50-427DIN
White painted aluminium
G60-427D
Stainless steel
G60-427DIN
White painted aluminium
G70-427D
Stainless steel
G70-427DIN
White painted aluminium
G80-427D
Stainless steel
G80-427DIN
White painted aluminium
G100-427D
Stainless steel
G100-427DIN
White painted aluminium
G50-427DI
Stainless steel
G50-427DIIN
White painted aluminium
G60-427DI
Stainless steel
G60-427DIIN
White painted aluminium
G70-427DI
Stainless steel
G70-427DIIN
White painted aluminium
G80-427DI
Stainless steel
G80-427DIIN
White painted aluminium
G100-427DI
Stainless steel
G100-427DIIN
Lighting
Accessories
1-15
1
Floodlights
TIGER series
Lighting
TIGER
Zones 2 and 21, 22
Vertical mount
IECEx ITS 12.0004X
Horizontal mount
IECEx ITS 12.0004X
Ex nR IIC T3 Gc
Ex tb IIIC T174ºC to T194ºC Db
IP 66
Ex nR IIC T3/T2 Gc
Ex tc IIIC T195/210ºC Dc
IP 66
Ambient temp. / Temp. class/
Max surface temp.
Ambient temp. / Temp. class/
Max surface temp.
-50ºC to +45ºC / T3/ 174ºC
-50ºC to +60ºC / T3/ 194ºC
-20ºC to +45ºC / T3/ 195ºC
-20ºC to +60ºC / T2/ 210ºC
Features:
•
•
•
•
•
•
•
Tempered glass cover
Fast maintenance
Simple wiring thanks to the use of marked terminals
Anti-corrosion aluminium clips
Flat glass anti-light pollution
Suitable for lamps up to 400 W
Symmetrical / asymmetrical reflectors available
Dimensions (mm)
Lamp type
High pressure sodium
High pressure sodium
High pressure sodium
High pressure sodium
High pressure sodium
High pressure sodium
Metal halide
Metal halide
Metal halide
Metal halide
* Lamp not included
Lamp power
150 W
150 W
250 W
250 W
400 W
400 W
250 W
250 W
400 W
400 W
Reflector
Symmetric
Asymmetric
Symmetric
Asymmetric
Symmetric
Asymmetric
Symmetric
Asymmetric
Symmetric
Asymmetric
Spare parts
Description
Tempered glass cover
Lampholder
1-16
Cat. No.
G-505
PORT E-40
Weight (kg)
10.5
10.5
11.3
11.3
13
13
11.3
11.3
13
13
Cat. No.
TIGER-150NA
TIGER-150NAAS
TIGER-250NA
TIGER-250NAAS
TIGER-400NA
TIGER-400NAAS
TIGER-250HA
TIGER-250HAAS
TIGER-400HA
TIGER-400HAAS
1
Rectangular floodlights
SLEE series
Lighting
Zones 1, 2 & 21, 22
IECEx TSA 08.0011
Ex de IIB + H2 T2/T3
Ex tb T188ºC/ 198ºC Db
IP 65/66
Ambient temperature / Temp. class / Max. surface temp.
-20ºC to +40ºC / 50ºC / 188ºC / 198ºC
SLEE
Features:
•
•
•
•
Suitable for high pressure sodium vapour and metal halide lamps up to 400W
Indirect cable entry
Easy installation, both vertical and horizontal, thanks to the mobile supporting bracket
Copper-free aluminium alloy body
•
•
•
•
•
Anodised aluminium reflector
Frontal tempered glass
RAL 7035 epoxy coating
Neoprene sealings
Internal / external stainless steel earth screw
Dimensions (mm)
A
296
296
296
296
296
B
482
482
458
482
482
C
480
480
355
480
480
a
174
174
174
174
174
SLEE-40
Lamp type
Metal halide
Metal halide
high pressure
sodium
high pressure
sodium
high pressure
sodium
b
291
291
266
291
291
SLEE-25
Cat. No.
SLEE-40IM5
SLEE-40IM6
SLEE-25N4
SLEE-40N5
SLEE-40N6
SLEE-40 and SLEE-25
Lamp
power
250 W
400 W
Lamp
holder
E40
E40
Temperature
class
T3 / T3
T3 / T2
Max. surface
temperature C
200
200 / 300
Weight
(kg)
Cat. No.
14.85
SLEE-40IM5
20.38
SLEE-40IM6
150 W
E40
T4 / T3
135 / 200
14.85
SLEE-25N4
250 W
E40
T3
200
14.85
SLEE-40N5
400 W
E40
T3 / T2
200 / 300
20.38
SLEE-40N6
1-17
1
LED floodlights
EWL series
Lighting
Zones 1, 2 & 21, 22
IECEx ITS 11.0018
Ex de IIC T5 Gb
Ex tb IIC T100ºC Db
IP 66
Ambient temperature / Temp. class / Max. surface temp.
EWL 70/80: Standard -20ºCto +60ºC / T5 / T100ºC
EWL 100: Standard - 40ºC to +60ºC / T5 / T100ºC
EWL 80
Features:
Rated Voltage:
EWL 70 EWL 80/100
- 220-240 V AC
- 100-240 V AC or 24 V DC
Beam angle:
Optical lens available allowing 4 different light emission angles
• 120° (Standard with no lens)
• 10° lens (Narrow)
• 20° lens (Medium)
• 40° lens (Wide)
Colour temperature:
Cool white - min. 5000 K, max. 8300 K
Estimated lifespan 100,000 hours (12 hours a day for 20 years)
Instant restrike capability
If one or more of the LEDs fails, the lamp keeps on working
High resistance to vibration (longer lifespan if installed in severe operating conditions)
Mechanical Features:
Body: Low copper content aluminium alloy fitted with cooling fins for better heat dissipation
Glass face: Shock and temperature resistant tempered glass sealed with aluminium ring
Gaskets: Acid, hydrocarbon and high temperature resistant silicone
Supporting bracket: Stainless steel 316L
Bolts and screws: Stainless steel
Entries: 2 x ISO M20 entries. Come with PLG1IB plug and REV1IB cable gland
Coating: Epoxy coating RAL 7035 (Light grey)
EWL 70
1-18
EWL 80
EWL 100
LED light output equivalents
Series
LED Equivelant
120º (No Lens)
10-40º Lens
LED Power
EWL70
40 W
100 W (MH)
150 W (Hg)
250 W (INC)
150 W (MH)
250 W (Hg)
300 W (INC)
EWL80
65 W
150 W (MH)
250 W (Hg)
450 W (INC)
250 W (MH)
400 W (Hg)
500 W (INC)
EWL100
180 W
450 W (MH)
750 W (Hg)
1200 W (INC)
800 W (MH)
1200 W (Hg)
1500 W (INC)
Catalogue number construction:
EWL
80
-
-
Series
Voltage
Blank = 240 V AC
24 = 24 V DC
Size
70 = 40 W
80 = 65 W
100 = 100 W
Lens option
Blank = No Lens (120°)
40 = 40° Lens - Wide Beam
20 = 20° Lens - Medium Beam
10 = 10° Lens - Narrow Beam
Description
A
øB
C
D
E
F
Weight (kg) Cat. No.
40 W LED FLOODLIGHT
65 W LED FLOODLIGHT
180 W LED FLOODLIGHT
218
240
332
215
260
385
342
336
463
173
170
225
273
277
387
157
157
207
6.5
8.6
18.4
*Refer to chart above
EWL70*
EWL80*
EWL100*
2
Flame proof enclosures
Flame proof enclosures
Selection chart HAE certified IEC Ex workshop Aluminium EJB series
2-2
Equipment, control and terminal enclosures 2-4
Motor starters
2-6
2-3
Ex de combinations
Equipment, control and terminal enclosures 2-7
Stainless steel EJBX series
Equipment, control and terminal enclosures 2-9
Aluminium CCA..E series
Equipment and terminal enclosures 2 - 10
Aluminium CCA..C series
Equipment and terminal enclosures 2 - 11
Aluminium GUB series
Equipment and terminal enclosures
2 - 12
Aluminium EFDC series
Control stations 2 - 14
Aluminium SFX series
Junction boxes
2 - 15
EX d command and control operators
2 - 16
TERMINAL AND
JUNCTION BOXES
MOTOR STARTERS
COMMAND AND
CONTROL OPERATORS
CONTROL STATIONS
CONTROL STATIONS
2
Flame proof enclosures
Selection chart
Flame proof enclosures
Flame proof enclosures selection chart
Protection
Description
Technique
Equipment, control and terminal enclosures
EJB Series
Ex d / Ex tb
- Cast aluminium housing
-IP66/67
- Multiple sizes
- Custom solutions available
- Glass window available
EJBX Series
- 316L and stainless steel
-IP66/67
- Custom solutions available
Motor starters
EJB Series
- Cast aluminium housing
-IP65/66
- VSDs
-DOL, Star-delta and reverse
starters
- Distribution panels
- Glass window available
- Stainless steel version available
Zone 1
Zone 2
Zone 21 Zone 22 Group
3
3
3
3
IIB
+ H2
Ex d / Ex tb
3
3
3
3
I/IIB
+ H2
Ex d / Ex tb
3
3
3
3
IIB
+ H2
3
3
3
3
IIC
3
3
3
3
IIC
3
3
3
3
IIC
Equipment, control and terminal enclosures
GUB, CCA Series
Ex d / Ex tD
- Cast aluminium housing
- Glass window available
- Standard junction box solutions
- Custom solutions available
Control Stations
EFDC Series
Ex d / Ex tD
- Cast aluminium housing
- Standard with 2 x 1” NPT entries
-Up to 4 operators on a single unit
Junction boxes
SFX Junction boxes
- Cast aluminium boxes
- Stainless steel version available
2-2
Ex d / Ex tD
2
HAE certified IEC Ex workshop:
Flame proof enclosures
NHP supplies not only the Cortem range of hazardous area equipment, but equally
important, customer specific systems via our assembly workshop located at our
National Distribution and Manufacturing Centre in Melbourne.
In this workshop, accredited staff design, construct and inspect the Cortem range
according to the requirements of IECEx certification. It allows for flexibility to produce
custom solutions to suit your HAE requirements
including:
• Specialist lighting requirements
• Control stations (including custom orders)
• Terminal boxes (including custom orders)
• Full panel design and construction (in both Ex d and Ex de technologies)
The NHPEx workshop enables both expeditious and effective solutions for customers
and operates under stringent quality assurance guidelines.
NHPEx can assemble the following to customer specifications:
•Distribution panels
• Motor control
• Control stations
• Automation solutions
Scan the QR
code for our
HAE Solutions
video
2-3
2
Aluminium EJB series
Equipment, control and terminal enclosures
Flame proof enclosures
Zones 1, 2 & 21, 22
IECEx TSA 06.0011
Ex d [ia Ga] IIB + H2 Gb T4/T5/T6
Ex tb [ia Da] IIIC Db IP 66/67 T4/T5/T6
Ambient temperature
- 20°C + 55°C
Features:
EJB
EJB series enclosures are used either as junction boxes with/without terminals or for installation
of electrical equipment such as circuit breakers, operators, remote control switches, transformers, etc,
EJB enclosures can also be fitted with custom glass windows.
The body and cover can be drilled and threaded, and equipment installed according to customers’
specifications in the NHPEx workshop.
NHP designs, develops and supplies enclosures drilled with equipment installed, cabled and tailored
to your specific requirements including complex control and power solutions such as panel boards.
NHPEx supply completed enclosures, fully tested and certified to IECEx standards.
Below is an example of the type of equipment that can be installed inside or on enclosure lids.
Operators
PLCs, multiplexers and amplifiers
Electronic control devices
Indicators
Testing and measuring devices
Contactors
Selectors Switches
Circuit breakers
Timers
Emergency Stops
Fuses
Twilight relays
Pushbuttons
Relays
Capacitors
Control Levers
Reactors
Transformers
Analogue and digital instruments
Terminals
Resistors
Viewing windows
Round and square
EJB with window
Contact NHP for a quote today.
EJB with operators
and window
2-4
Notes: Fully customisable options.
Drawings can be sent directly to our estimating team for an immediate quote.
More sizes available upon request, anti-condensation paint available upon request.
2
Aluminium EJB series
Equipment, control and terminal enclosures
Outside
dimensions
(mm)
A
B
C
Internal dimensions
(mm)
a
b
c
s
s1
Mounting with
Blank
brackets (mm) Weight enclosure
D
E
F (Kg)
Cat. No.
282
182 105 214 113
60
13
13
-
5.6
EJB-01
304
204 218 240 140 160
9
14
230 210
9
9.4
EJB-1
304
204 218 240 140 153
24
14
230 210
9
10.3
EJB-1A
364
284 278 300 220 213
24
14
290 290
9
19.4
EJB-3A
364
284 218 300 220 153
24
14
290 290
9
16.4
EJB-3BA
432
332 299 360 260 218
10
14
350 330
11
23.4
EJB-4
432
332 299 360 260 233
24
14
350 330
11
25.4
EJB-4A
432
332 229 360 260 163
24
14
350 330
11
21.4
EJB-4BA
567
387 298 490 305 210
13
14
360 356
11
36.5
EJB-45
567
387 298 490 305 229
24
14
360 356
11
38.9
EJB-45A
567
387 248 490 305 160
13
15
360 356
11
33.1
EJB-45B
567
387 248 490 305 179
24
14
360 356
11
35.3
EJB-45BA
632
432 341 560 360 256
15
15
550 430
11
49.8
EJB-5
632
432 341 560 360 275
24
16
550 430
11
51
EJB-5A
632
432 271 560 360 205
24
16
550 430
11
43.4
EJB-5BA
710
510 356 630 430 273
24
20
600 490
11
81.3
EJB-55
710
510 256 630 430 173
24
20
600 490
11
66.9
EJB-55B
870
650 480 760 540 353
24
22
680 580
14
158.4
EJB-6
870
650 380 760 540 253
24
22
680 580
14
138.5
EJB-6B
1000 700 500 890 590 340
30
30
810 655
18
248
EJB-7
1000 700 400 890 590 240
30
30
810 655
18
.
EJB-7B
-
-
Flame proof enclosures
Dimensions (mm)
Note: Enclosures cannot be supplied blank. Contact NHP for a quote today.
HAE Catalogue > Section 2: Flame proof enclosures > Aluminium EJB Series - Motor starters
2-5
2
Aluminium EJB series
Motor starters
Flame proof enclosures
Zone 1, 2 & 21, 22
IECEx TSA 06.0011
Ex d [ia Ga] IIB + H2 Gb T4/T5/T6
Ex tb [ia Da] IIIC Db IP66/67
Ambient temperature
–20°C + 55°C
Features:
EJB
• Fully customisable options
• Drawings can be sent directly to our estimating team for immediate quote
•
VSD solutions available, contact NHP for further information
Power (kW)
2.2
4
5.5
5.5
7.5
7.5
11
15
22
Max voltage (V)
400
400
400
400
400
400
400
400
400
Max
current (A)
5
9
11
11
14
14
21
21
40
Max dissipated
power (W)
140
140
180
140
180
140
140
140
350
Enclosure type
EJB-1A
EJB-1A
EJB-3BA
EJB-1A
EJB-3BA
EJB-1A
EJB-1A
EJB-1A
EJB-4A
Starting method
DOL
DOL
Reverse
DOL
Reverse
DOL
DOL
DOL
Star-Delta
* Contact NHP for quote and for further information
Off the shelf
Description
EXD 415 V DOL STARTER 7.5 kW
EXD 415 V DOL STARTER 15 kW
Enclosure type
EJB1A
EJB1A
Cat. No.
EJB1A4DOL7
EJB1A4DOL15
As standard the starters are supplied with:
• Start pushbutton
• Stop pushbutton
• Overload with DIP switch adjustable trip classes
• Class 10, 15, 20 and 30 to suit various load run-up times
• DIP switch adjustable Auto/Manual reset
Units can also be built with the following additional options
• Main switch, control circuit transformer
• PTC Thermistor relay module available
• Main and starter fuses
• Ground fault protection module available
• Indicator lights
• Single or three phase models available
• Selector switches
• Profibus® and Ethernet/IP™ modules
• Remote reset module
• DeviceNet™ module available for fully adjustable
jam/stall protection and thermal warning to
• Jam/stall protection module available
indicate imminent overload trip
* Contact NHP for quotes and further information.
2-6
Ex de combinations
Equipment, control and terminal enclosures
Features:
The capabilities of the NHPEx workshop include combining protection techniques which allow
flexibility in product design and site installation.
All Ex d enclosures can be physically joined to any Ex e enclosure, providing an Ex de solution
which can ultimately reduce purchasing and installation costs.
The concept is used to allow all non-certified equipment (MCBs, PLCs, Transformers etc.) to be
installed in an Ex d enclosure while all wiring terminations to terminals are via the connected Ex e
enclosure.
The main benefit of using this technique is purchasing cost and installation times are reduced.
Site installation will only require termination inside the Ex e enclosure saving on installation time ,
as barrier glands will generally not be required. Also with this technique, the Ex d is designed using
a smaller enclosure, further reducing costs.
Flame proof enclosures
Zones 1, 2 & 21, 22
2
Non-certified equipment inside Ex
d enclosure (All wiring completed in
NHPEx workshop)
Certified connection between Ex d and
Ex e enclosure (interconnection wiring
completed in NHP \Ex workshop)
Terminal connections inside Ex d
enclosure (Equipment termination
completed in NHPEx workshop)
Terminal connections inside Ex
d enclosure (Field termination
completed on site)
Field termination via Ex e cable
gland entry
2-7
2
Stainless steel EJBX series
Equipment, control and terminal enclosures
Flame proof enclosures
Zones 1, 2 & 21, 22
IECEx TSA 06.0011
Ex d [ia Ma] I Mb
Ex d [ia Ga] IIB + H2 Gb T4/T5/T6
Ex tb [ia Da] IIIC Db IP66/67 T4/T5/T6
Features:
EJBX with operators
EJBX series enclosures are AISI 316L stainless steel and have mechanical features superior than those in
aluminium. They are used either as junction boxes with/without terminals or for installation of electrical
equipment such as circuit breakers, operators, remote control switches, transformers, etc.
They are suitable for chemically aggressive and extreme environments such as marine.
The body and cover can be drilled and threaded, and equipment installed according to customers’
specifications in the NHPEx workshop.
NHP designs, develops and supplies enclosures drilled with equipment installed, cabled and tailored to
your specific requirements including complex control and power solutions such as panel boards.
NHPEx supply completed enclosures, fully tested and certified to IECEx standards.
Below is an example of the type of equipment that can be installed inside or on enclosure lids.
EJBX
Operators
PLCs, multiplexers and amplifiers
Electronic control devices
Indicators
Testing and measuring devices
Contactors
Selectors switches
Circuit breakers
Timers
Emergency stops
Fuses
Twilight relays
Pushbuttons
Relays
Capacitors
Control levers
Reactors
Transformers
Analogue and digital instruments
Terminals
Resistors
Contact NHP for a quote today.
Notes: Fully customisable options.
2-8
Drawings can be sent directly to our estimating team for an immediate quote.
More sizes available and anti-condensation paint available upon request.
2
Stainless steel EJBX series
Equipment, control and terminal enclosures
Flame proof enclosures
Dimensions (mm)
Outside
dimensions (mm)
A
B
C
a
b
c
g
D
E
F
Blank
enclosure
Cat. No.
312
212
201
240
140
155
12
180
210
11
EJBX-1
432
232
201
360
160
155
12
300
230
11
EJBX-2
372
292
261
300
220
215
12
290
240
11
EJBX-3
372
292
201
300
220
155
12
290
240
11
EJBX-3B
432
332
284
360
260
235
15
330
300
11
EJBX-4
432
332
214
360
260
165
15
330
300
11
EJBX-4B
562
382
284
490
310
232
15
440
390
11
EJBX-45
562
382
234
490
310
188
15
440
390
11
EJBX-45B
632
432
324
560
360
275
15
500
430
11
EJBX-5
632
432
254
560
360
205
15
500
430
11
EJBX-5B
710
510
318
610
410
255
20
560
540
20
EJBX-55
710
510
218
610
410
155
20
560
540
20
EJBX-55B
860
640
409
760
540
345
20
680
680
20
EJBX-6
860
640
309
760
540
245
20
680
680
20
EJBX-6B
1000
700
338
900
600
275
20
820
740
20
EJBX-7
Inside dimensions (mm)
Mounting (mm)
Note: Enclosures cannot be supplied blank, please contact NHP for a quote.
2-9
2
Aluminium CCA…E series
Equipment and terminal enclosures
Flame proof enclosures
Zone 1, 2 & 21, 22
IECEx TSA 06.0012
Ex d IIC
Ex tD A21 IP66/67
Ambient temperature
CCA...E
- 20°C+ 55°C
Features:
CCA…E series aluminium alloy enclosures are used both as junction boxes with terminals or other
electrical equipment such as fuses, relays, disconnectors, remote control switches, transformers,
ballast etc.
The body can be drilled and threaded, and equipment installed according to customers’ specifications
in the NHPEx workshop.
CCA…E enclosures are also available with a round glass window on the cover.
CCA with window
Outside
dimensions (mm)
Inside
dimensions (mm)
Weight Kg
Blank
enclosure
Cat. No.
9
1.85
CCA-0E
9
2.80
CCA-01E
175
10
5.60
CCA-02E
213
213
12
9.10
CCA-03E
339
339
14
26.70
CCA-04E
Fixings (mm)
A
B
ØB1
C
a
b
c
e
f
ØG
128
128
146
125
104
104
75
111
138
145
145
160
128
121
121
75
128
150
195
195
212
150
171
171
85
175
240
240
260
210
216
216
135
385
385
410
275
353
353
150
Enclosures cannot be supplied blank, please contact NHP for a quote.
Notes: : Fully customisable options stainless steel option available
Drawings can be sent directly to our estimating team for an immediate quote.
More sizes available, anti-condensation paint available upon request, 2-10
2
Aluminium CCA…C series
Equipment, control and terminal enclosures
IECEx TSA 06.0012
Ex d IIC
Ex tD A21 IP66/67
Ambient temperature
CCA...C
- 20°C+ 55°C
Features:
CCA…C series aluminium alloy enclosures are used both as junction boxes with terminals or other
electrical equipment such as fuses, relays, disconnectors, remote control switches, transformers,
ballast etc.
The body and cover can be drilled and threaded, and equipment installed according to customers’
specifications in the NHPEx workshop.
Flame proof enclosures
Zone 1, 2 & 21, 22
CCA...C
Outside
dimensions (mm)
Inside
dimensions (mm)
A
B
ØB1
C
a
b
c
E
F
ØG
Weight Kg
Blank
enclosure
Cat. No.
128
128
150
146
104
104
122
111
138
9
4.00
CCA-0C
145
145
149
170
121
121
113
128
150
9
5.00
CCA-01C
195
195
166
212
171
171
130
175
175
10
8.00
CCA-02C
240
240
223
260
216
216
185
213
213
12
14.00
CCA-03C
385
385
262
410
353
353
200
339
339
14
33.00
CCA-04C
Fixings (mm)
Enclosures cannot be supplied blank, please contact NHP for a quote.
Notes: : Fully customisable options Stainless steel option available
Drawings can be sent directly to our estimating team for an immediate quote.
More sizes available, anti-condensation paint available upon request
2-11
2
Aluminium GUB series
Equipment and terminal enclosures
Flame proof enclosures
Zones 1, 2 & 21, 22
IECEx TSA 06.0012
Ex d IIC
Ex tD A21 IP66/67
Ambient temperature
- 20°C + 55°C
GUB
Features:
The GUB series aluminium alloy enclosures are used both as junction boxes with or without
terminals or other electrical equipment such as fuses, relays, disconnectors, remote control
switches, transformers, ballast, indicators, pushbuttons, selector switches etc.
The body can be drilled and threaded, and equipment installed according to customers’
specifications in the NHPEx workshop.
The GUB series are also available with a round glass window on the cover, please refer to GUB…V
part numbers for details.
Dimensions (mm)
Outside
dimensions (mm)
GUB...B
Inside
dimensions (mm)
Weight Kg
Blank
enclosure
Cat. No.
9
1.91
GUB
145
9
2.10
GUB-S
174
10
2.52
GUB-0
150
195
10
3.90
GUB-01
92
196
267
14
6.83
GUB-02
250
135
236
316
14
11.92
GUB-03
398
158
390
480
14
29.36
GUB-04
480
480
164
480
570
14
55.00
GUB-05
90
126
126
75
126
174
10
2.8
GUB-0V
90
146
146
105
154
195
10
4.3
GUB-01V
154
140
204
204
95
196
265
14
7.6
GUB-02V
276
200
180
250
250
140
236
316
14
14.1
GUB-03V
430
275
310
398
398
190
390
480
14
31.0
GUB-04V
Fixings (mm)
A
B
C
ØL
a
b
c
E
F
ØG
120
120
116
-
96
96
60
100
145
120
120
145
-
96
96
93
100
150
150
130
-
126
126
68
126
174
174
140
-
146
146
78
230
230
165
-
204
204
276
276
217
-
250
430
430
290
-
398
520
520
327
-
150
150
125
174
174
160
230
230
276
430
Notes: Fully customisable options.
2-12
Drawings can be sent directly to our estimating team for an immediate quote.
Contact NHP for further information.
Aluminium GUB series
Equipment and terminal enclosures
Flame proof enclosures
Dimensions (mm)
2
2-13
2
Aluminium EFDC series
Control stations
Flame proof enclosures
Zones 1, 2 & 21, 22
IECEx TSA 6.0009
Ex d IIC T6 (Tamb *ºC) IP 65
Ex tD A21 IP 65 T85ºC Tamb *ºC
Features:
EFDC
•
•
•
•
•
•
Suitable for control and signalling equipment
Aluminium RAL 7035 epoxy paint
1 to 4 operators on a single enclosure
Cylindrical housing in copper-free aluminium alloy
Stainless steel bushing and pushbutton shaft
Also available in a double unit allowing for up to 8 operators, contact NHP for further information
Dimensions (mm)
EFDC 23
Description
Cat. No.
1 x Red pushbutton
EFDC 21
1 x Red indicator lamp
EFDC 25
1 x Mushroom head E-stop twist to release
EFDC21EMR
1 x Emergency control pushbutton with glass protection and hammer
EFDC 21EMV
1 x Mushroom head E-stop key to release
EFDC 21EMC
1 x Red pushbutton, 1 x black pushbutton
EFDC 22
1 x Black pushbutton, 1 x red indicator lamp
EFDC 23
1 x Green indicator, 1 x red indicator
EFDC 24
1 x Mushroom head E-stop twist to release, 1 x pushbutton
EFDC21 EMRV1
1 x Mushroom head E-stop key to release, 1 x pushbutton
EDFC21 EMCV1
*Entries are 1” ISO 7/1 conical, for M20 entry use reducer (REGM3IF20B), for M25 use (REGM3IF25B)
For plug use PLG3B. On request it is also possible to order a combination of 2 different EFDC series
control stations connected together via a single ex d housing.
Note: Contact NHP for other combinations.
2-14
2
Aluminium SFX series
Junction boxes
AUS Ex 03.3892
IECEx
Ex d IIC T6
Ex tD A21 IP 66/67
SFX
Features:
• SF series has a wall mounting bracket whereas SSC series has a ceiling mounting bracket
• Stainless steel screws
S, SF, and SSC series junction boxes are suitable for installation along piping as junction boxes and
distribution boxes for conductors. Several models are available in relation to size and number of entries.
They can be supplied as pulling boxes or as terminal boxes with multipolar or modular terminal boards.
SSC
SF Series
D1
A
B
Entries
Weight (kg)
Cat. No.
65
75
90
4 x M20
0.3
SFX-14.I1
65
75
90
4 x M25
0.3
SFX-24.I1
89
110
130
4 x M20
0.6
SFX-16.I1
89
110
130
4 x M25
0.6
SFX-26.I1
89
110
130
4 x M32
0.6
SFX-36.I1
146
155
180
4 x M25
1.5
SFX-29.I1
146
155
180
4 x M32
1.4
SFX-39.I1
D1
A
B
Entries
Weight (kg)
Cat. No.
65
65
80
3 x M20
0.3
SSC-14.I1
65
65
80
3 x M25
0.3
SSC-24.I1
89
110
125
3 x M20
0.6
SSC-16.I1
89
110
125
3 x M25
0.6
SSC-26.I1
89
110
125
3 x M32
0.6
SSC-36.I1
146
130
150
3 x M25
1.8
SSC-29.I1
146
130
150
3 x M32
1.7
SSC-39.I1
Flame proof enclosures
Zones 1, 2 & 21, 22
SSC Series
Notes: Contact NHP for other combinations. Stainless steel available upon request.
2-15
2
EX d command and control operators
Flame proof enclosures
Zones 1, 2 & 21, 22
IECEx TSA 06.0015U
Ex d IIC
Ex tD A21 IP66
Features:
M-O445
M-0 series control, monitoring and signaling devices are installed as external accessories on Cortem
‘Ex d’ enclosures used in any industrial environment where an explosive atmosphere may be present,
classified as Zone 1, 2, 21, 22.
M-O428
M-0 control devices can be used to close or open electrical or mechanical devices fitted inside the
‘Ex d’ enclosures while the signaling devices feature lights to indicate their operating status.
The control and signaling device components are made from stainless steel to deliver unbeatable
efficiency under any environmental conditions. Levers are made from aluminium while the plastic
parts on push-buttons are designed to provide lengthy service life even when used in a highly
corrosive atmosphere.
M-0 control and signaling devices have an IP66 protection degree.
All identification, test or warning labels located on the enclosure lids are made from aluminium,
stainless steel or Traffolyte depending on your specific requirements or as dictated by
our own standards.
Electrical Features (Contact block for operators)
Rated voltage: 600 V
Rated current: 10 A
Impulse withstand voltage: 4 kV
Insulation category: Group C as per VDE 0110
Contact operation: – slow acting
– self-cleaning (wiping action)
– N/C contact forced opening
– double movable bridge
– four points of contact
– double break
Contact resistance ≤25 mΩ as per IEC 255.7 category 3
Short-circuit protection
16 A gG time-delay fuses as per IEC 269.1 and 269.3
Electrical performance
Rated thermal current Ith = 10 A
Operational limits as per IEC 947.5.1:
Category AC15
Voltage Ue (V)
24
48
60
110
220
380
500
600
Current Ie (A)
10
10
10
6
3
2
1.5
1.2
Voltage Ue (V)
24
48
60
110
220
300
Current Ie (A)
2.5
1.5 1
0.22
0.27
0.2
Category DC13
Operational limits as per IEC 947.5.1:
Category AC15
2-16
AC Heavy duty
(A600)
DC Standard duty
(Q300)
2
EX d command and control operators
Ex d operators
M-0429
M-0428
Cat. No.
Momentary -emergency mushroom button with 1N/O+1N/C contact
M-0430
Twist to release - emergency mushroom button with 1N/O+1N/C contact
M-0445
Key to release - emergency mushroom button with 1N/O+1N/C contact
M-0446
Pull to release - emergency mushroom button with 1N/O+1N/C contact
M-0447
Add suffix IN for stainless steel body
Description
Cat. No.
Blue pushbutton with 1N/O+1N/C contact
M-0429B
White pushbutton with 1N/O+1N/C contact
M-0429BI
Yellow pushbutton with 1N/O+1N/C contact
M-0429G
Black pushbutton with 1N/O+1N/C contact
M-0429N
Red pushbutton with 1N/O+1N/C contact
M-0429R
Green pushbutton with 1N/O+1N/C contact
M-0429V
Flame proof enclosures
M-0445
Description
Add suffix IN for stainless steel body
Add Suffix L for padlocking option
Description
Cat. No.
Blue luminous pushbutton with 1N/O+1N/C contact
M-0428B
White luminous pushbutton with 1N/O+1N/C contact
M-0428BI
Yellow luminous pushbutton with 1N/O+1N/C contact
M-0428G
Red luminous pushbutton with 1N/O+1N/C contact
M-0428N
Green luminous pushbutton with 1N/O+1N/C contact
M-0428V
Add sufffix IN for stainless steel body
Description
Cat. No.
Double push-button with standard 10A 600V 2O+2N/C contacts.
Comprises one red button and one black button.
M-0427
Add Suffix L for padlocking option
M-0427
2-17
2
EX d command and control operators
Ex d Cam switches
Flame proof enclosures
Description
Control device for rotary or cam switches
Rated voltage – 690 V
Rated current – up to 63 A
M-0553
For padlockable add suffix L
M-0553
Ex d Indicators
Description
Cat. No.
Blue LED indicator
M-0457/3B*
Yellow LED indicator
M-0457/3G*
Red LED indicator
M-0457/3R*
Green LED indicator
M-0457/3V*
Clear LED indicator
M-0457/3I*
M-0429
Indicator light with three high brightness LEDs, for a consumption of 20 mA and
estimated life of around 50,000 hours.
Add suffix: 24 for 24 V AC/DC
110 for 110 V AC/DC
230 for 230 V AC
Ex d Operator handles
Description
Variable length control device handles for rotary or cam switches,
MCBs, automatic switches, potentiometers, reset devices etc. available.
Please contact NHP for details.
Padlockable brackets
Custom padlockable brackets made from aluminium, stainless steel
are available to suit control or labelling requirements.
2-18
Cat. No.
NTU takes on Hazardous Area Equipment!
If you haven’t already taken advantage of the NHP Training
University (NTU) training program, don’t wait any longer!
Other NTU modules now available include:
• Contactors & Overloads
The latest module looks at Hazardous Area Equipment and
explains the basic principle of explosion protection from area
classifications to temperature classes and the different types of
protection methods available.
• Motor Starters & Controllers
When it comes to selecting Hazardous Area Equipment for your
specific installation requirements, with NTU you’ll be covered.
• Machine Safety Control Systems
To find out more, scan
the QR code
nhpntu.com
• NHP Smartphone Apps: Tradie Tools on the Go
• Fundamentals of Electricity
• Fundamentals of Electrical Equipment
Scan to download the
NHP eCatalogues App for
exclusive video content,
catalogues and literature!
Get switched on with NTU nhpntu.com
3
Increased safety enclosures
Increased safety enclosures
Selection chart 3-2
Aluminium junction boxes and control stations – SA series
3-3
Stainless steel junction boxes – SA…SS series
3-5
GRP junction boxes – SA…P series
3-7
Standard control stations - SA/P SS series
3-9
Ex e custom assembly request form
3 - 11
Ex e command and control operators
3 - 12
JUNCTION BOXES
COMMAND AND
CONTROL OPERATORS
STANDARD CONTROL
STATIONS
STANDARD CONTROL
STATIONS
3
Increased safety enclosures
Selection chart
Increased safety enclosures
Protection
Technique
Zone 1 Zone 2 Zone 21 Zone 22 Group
Ex e/ Ex tb
3
3
3
3
IIC
Junction boxes and control stations
SA…SS Series
- Stainless steel housing
- Fully customisable options
- IP65/ 66
Ex e/ Ex tb
3
3
3
3
IIC
Junction boxes and control stations
SA…P Series
- Glass reinforced polyester housing
- Fully customisable options
- IP65/ 66
Ex d/ Ex tb
3
3
3
3
IIC
3
3
3
3
IIC
Description
Junction boxes and control stations
SA Series
- Cast aluminium housing
- Fully customisable options
- IP65/ 66
Standard control stations
SA, SA…P, SA…SS Series
- Varied systems can be assembled to suit Ex e/ Ex tb
control applications
3-2
Aluminium junction boxes and control stations
SA series
IECEx CES 13.0001
Ex e IIC T6 or T5 Gb
Ex tb IIIC T85º or T100º Db
Ex e ia IIC T6 or T5 Gb
Ex tb ia IIIC T85ºC or T100ºC Db
IP 66
SA111108
Ambient Temp./Temp. Class/Max Surface Temp.
- 50°C + 40°C /T6 / T85°C
- 50°C + 55°C /T5 / T100°C
Features:
SA series junction boxes are constructed of aluminium alloy and are suitable for electrical installations
as increased safety boxes. Thanks to the wall thickness (7 mm), they can be directly connected to pipes
and conical threaded unions. They can be supplied with multipolar terminal blocks or with modular
terminal blocks. SA series boxes can be drilled by the NHPEx workshop according to customers’
specification and in accordance with certification.
Maximum number of entries (bottom)
Maximum number of terminals
Area (mm)
M20
M25
M32
2.5mm
4mm
6mm
38 x 35
1
1
-
1x4
-
-
SA090907
58 x 45
2
2
1
1x6
1x4
-
SA111108
AJB164420
Increased safety enclosures
Zones 1, 2 & 21, 22
3
Cat. No.
118 x 45
5
3
2
1 x 18
1 x 14
1 x 11
SA171108
90 x 55
4
3
2
1 x 13
1 x 11
1x9
SA141410
144 x 74
8
6
3
2 x 22
2 x 18
2 x 15
SA202012
245 x 55
12
11
5
1 x 38
1 x 32
1 x 25
SA301410
245 x 55
12
22
5
2 x 43
2 x 37
2 x 30
SA302310
245 x 130
24
24
14
2 x 43
2 x 37
2 x 30
SA302318
360 x 130
36
44
18
2 x 70
2 x 37
2 x 46
SA473018
Note: Enclosures cannot be supplied plank, please contact NHP for quote
Off the shelf
Terminal
No. of terminals
Entries
Enclosure
Cat. No.
Screw
6 x 4mm² + 2 x earth
4 x M20 - 2 plugged
SA111108
AJB164420
Note: Alternative terminal arrangements, sizes and numbers are available upon request.
Contact NHP for more details.
3-3
3
Aluminium junction boxes
SA series
Increased safety enclosures
Dimensions (mm)
External
dimensions (mm)
3-4
Internal dimensions (mm)
Fixing (mm)
A
B
C
a
b
c
s1
s2
X
Y
ØD
Cat. No.
90
90
75
78
78
52
3
2.5
74
74
6.5
SA090907
110
110
85
98
98
65
3
2.5
94
94
6.5
SA111108
170
110
85
158
98
63
3
2.5
154
94
6.5
SA171108
147
147
100
135
135
79
3
2.5
131
131
6.5
SA141410
200
200
120
184
184
98
4
3
180
180
6.5
SA202012
305
147
110
289
131
92
4.5
3
285
127
7
SA301410
305
230
110
289
212
92
4.5
3
285
210
7
SA302310
305
230
190
289
212
172
4.5
3
285
210
7
SA302318
470
305
195
454
289
175
5
4
450
285
7
SA473018
3
Stainless steel junction boxes
SA…SS series
IECEx CES 13.0001
Ex e IIC T6 or T5 Gb
Ex tb IIIC T85º or T100º Db
Ex e ia IIC T6 or T5 Gb
Ex tb ia IIIC T85ºC or T100ºC Db
IP 66
SA171108SS
Ambient Temp./Temp. Class/Max Surface Temp.
- 40°C + 40°C /T6 / T85°C
- 40°C + 55°C /T5 / T100°C
Features:
SA...SS series junction boxes are constructed from AISI 316L stainless steel and are suitable for electrical
installations placed in aggressive environments as increased safety boxes. They can be supplied with
multipolar terminal blocks or with modular terminal blocks. Furthermore, they can be equipped
with pilot lights, pushbuttons and measuring instruments to assemble control and signalling panel
stations. SA..SS series junction boxes can be drilled by the NHPEx workshop according to customers’
specification and in accordance with certification.
Maximum number of entries (bottom)
Increased safety enclosures
Zones 1, 2 & 21, 22
Maximum number of
terminals
Area (mm)
M20
M25
M32
2.5 mm
4 mm
6 mm
60 x 30
1
1
-
1x4
-
-
Cat. No.
SA111108SS
60 x 30
2
2
-
1 x 15
1 x 13
1x8
SA171108SS
125 x 45
3
3
2
1 x 11
1x9
1x6
SA141410SS
120 x 45
7
6
5
1 x 39
1 x 31
1 x 25
SA301410SS
205 x 45
7
6
5
2 x 39
2 x 31
2 x 25
SA302310SS
205 x 115
21
18
10
2 x 39
2 x 31
2 x 25
SA302318SS
376 x 135
36
24
20
2 x 55
2 x 46
2 x 37
SA404020SS
280 x 115
32
29
16
2 x 68
2 x 57
2 x 46
SA473018SS
280 x 115
45
38
22
2 x 93
2 x 80
2 x 65
SA623018SS
576 x 135
56
36
32
5 x 90
5 x 75
5 x 60
SA606020SS
Note: Enclosures cannot be supplied blank, please contact NHP for quote
Off the shelf
Terminal
No. of terminals
Entries
Enclosure
Cat. No.
Screw
9 x 4mm² + 3 x earth
4 x M20
SA141410SS
SJB194420
3-5
3
Stainless steel junction boxes
SA…SS series
Increased safety enclosures
Dimensions (mm)
Dimensions (mm)
External Dimensions
Internal Dimensions
Fixing
A
B
C
C
E
F
a1
b1
110
110
90
37
67
67
38
130
0.8
SA111108SS
170
110
90
37
127
67
98
130
1.2
SA171108SS
147
147
110
55
92
92
75
167
1.4
SA141410SS
200
200
210
145
145
155
128
220
305
147
110
55
249
91
233
167
2.5
SA301410SS
305
230
110
55
249
174
233
250
4.3
SA302310SS
305
230
190
135
249
174
233
250
5.6
SA302318SS
SA202020SS
360
260
210
344
344
155
328
420
SA362614SS
400
400
210
155
344
344
328
420
SA404020SS
470
305
190
135
414
249
398
325
500
500
210
445
445
155
428
520
8
SA473018SS
SA505020SS
12
SA623018SS
620
305
190
135
564
249
548
325
600
600
210
155
545
545
528
620
SA606020SS
1000
700
300
940
640
255
464 + 464
740
SA1007030SS
Note: Anti-condensation paint available upon request.
More sizes are available upon request. Contact NHP for more details.
3-6
Weight Kg Cat. No.
3
GRP junction boxes
SA…P series
IECEx CES 13.0001
Ex e IIC T6 or T5 Gb
Ex tb IIIC T85º or T100º Db
Ex e ia IIC T6 or T5 Gb
Ex tb ia IIIC T85ºC or T100ºC Db
IP 66
SA171108/P
Ambient Temp./Temp. Class/Max Surface Temp.
- 40°C + 40°C /T6 / T85°C
- 40°C + 55°C /T5 / T100°C
Features:
SA/P series junction boxes are built in GRP resin and they are suitable for electrical installations as
increased safety boxes or intrinsically safety boxes. They can be supplied with multipolar terminal
blocks or with modular terminal blocks. Furthermore, they can be equipped with pilot lights,
pushbuttons and measuring instruments to assemble control and signalling panel stations. SA…P
series junction boxes can be drilled by the NHPEx workshop according to customers’ specification
and in accordance with certification.
Maximum No. of entries (bottom)
PJB164420
Increased safety enclosures
Zones 1, 2 & 21, 22
Maximum No. of terminals
Area (mm)
M20
M25
M32
2.5mm
4mm
6mm
38 x 35
1
1
-
1x4
-
-
Cat. No.
SA090907/P
58 x 45
2
1
1
1x6
1x4
-
SA111108/P
118 x 45
3
3
2
1 x 18
1 x 17
1 x 11
SA171108/P
90 x 55
3
2
2
1 x 13
1 x 11
1x9
SA141410/P
245 x 55
10
5
5
1 x 38
1 x 32
1 x 25
SA301410/P
245 x 55
10
5
5
2 x 43
2 x 37
2 x 30
SA302310/P
245 x 130
24
15
14
2 x 43
2 x 37
2 x 30
SA302318/P
Note: Enclosures cannot be supplied blank, please contact NHP for a quote.
Off the shelf
Terminal
No. of terminals
Entries
Enclosure
Screw
6 x 4mm² + 2 x earth
4 x M20 - 2 plugged SA111108/P
Cat. No.
PJB164420
Note: Alternative terminal arrangements, sizes and numbers are available upon request.
More sizes are available upon request. Contact NHP for more details.
3-7
3
GRP junction boxes
SA…P series
Increased safety enclosures
3-8
Dimensions (mm)
External
dimensions (mm)
Internal dimensions (mm)
Fixing (mm)
A
B
C
a
b
c
s1
s2
X
Y
ØD
Cat. No.
90
90
75
78
78
52
3
2.5
74
74
6.5
SA090907/P
110
110
85
98
98
65
3
2.5
94
94
6.5
SA111108/P
170
110
85
158
98
63
3
2.5
154
94
6.5
SA171108/P
147
147
100
135
135
79
3
2.5
131
131
6.5
SA141410/P
305
147
110
289
131
92
4.5
3
285
127
7
SA301410/P
305
230
110
289
214
92
4.5
3
285
210
7
SA302310/P
305
230
190
289
214
172
4.5
3
285
210
7
SA302318/P
3
Standard control stations
SA/P/SS series
IECEx CES 11.0032 issue 1
Ex de IIC T5 Gb
Ex tb IIC T85ºC or T100ºC db IP 66
P1-2RZ/01
S2-1GV-1RW/01
S3-4RZ-1GZ-1RZ/02
Single gang – description
1 x pushbutton, green
Contacts
1 N/O + 1 N/C
Entries
(bottom)
2 x M20
Cat. No. 1)
P1-1GZ/09
1 x mushroom head 38 mm
(twist release)
1 N/O + 1 N/C
1 x M20
P1-2RZ/01
1 x mushroom head 38 mm
(key release) + guard
1 N/O + 1 N/C
1 x M20
P1-3RZ/01-G
1 x mushroom head
38 mm (key release)
2 N/C
2 x M20
P1-3RY/09
Double gang – description
Contacts
Entries
(bottom)
Cat. No.
1 x pushbutton, green
1 x mushroom head 38 mm
(twist release) + guard and padlock
1 N/O + 1 N/C
1 N/O + 1 N/C
1 x M20
P2-1GZ-2RZ/01-P
1 x green pushbutton
1 x mushroom head 38 mm
(key release)
1 N/O
1 N/C
1 x M20
P2-1GZ-3RW/01
1 x pushbutton, green
1 x pushbutton, red
1 N/O
1 N/C
1 x M20
P2-1GV-1RW/01
Three gang – description
1 x pushbutton, green
1 x mushroom head 38 mm
(twist release)
1 x 3 position selector
switch - latching
Contacts
Entries
(bottom)
Cat. No.
1 N/O + 1 N/C
1 N/O + 1 N/C
1 x M25
P3-1GZ-2RZ-51C/02
1 x pushbutton, green
1 N/O + 1 N/C
1 x pushbutton, red
1 N/O + 1 N/C
1 x 3 position selector switch - latching
1 x M25
P3-1GZ-1RZ-51C/02
1 x pushbutton, green
1 x pushbutton, red
1 x mushroom head 38 mm
(key release)
1 x M25
P3-1GZ-1RZ-2RZ/02
1 N/O + 1 N/C
1 N/O + 1 N/C
1 N/O + 1 N/C
Increased safety enclosures
Zones 1,2 & 21, 22
* Custom control stations available on request.
1
) Substitute first letter of Cat. No. denotes material
P = GRP
A = Aluminium
S = Stainless steel
3-9
3
Catalogue number construction:
Increased safety enclosures
P
3
-
4
POSITION 1
R Z(1) - 1
Series
P=GRP
A=Aluminium
S = Stainless steel
Enclosure size
1 = Single gang
2 = Twin gang
3 = Triple gang
Switch(es)
1 = Momentary pushbutton
2 = 38 mm Mushroom head twist to release
3 = 38 mm Mushroom head key operator
4 =Indicator
5 = Selector switch
1
POSITION 2
POSITION 3
G Z(1) - 5 2M
Operator Contact Block(s)
V=1N/O
W= 1N/C
Z = 1N/C + 1 N/O
X=2N/O
Y=2N/C
Note: Max 2 per P/Button
LED Voltage
1 = 24 V DC
2 = 240 V AC
Colour
N = Black (P/B only)
R=Red
B=Blue
G=Green
Y=Yellow
C = Clear (Indicator only)
E-Stop accessories
G=Guard
P = Guard with padlock
Switch contacts configuration:
Options are 1Z, 2Z,1I, 2I, 3I, 4I, 1C, 2C,
1W, 2W, 1M, 2M, 3M, 4M
Entry(s)
01= 1 x M20 bottom
10= 1 x M20 top
11= 1 x M20 top and bottom
02= 1 x M25 bottom
20= 1 x M25 top
22= 1 x M25 top and bottom
09= 2 x M20 bottom
A31RX1GX4G101
= Control switch
X
R
M
3-10
A
B A
1
= 3 position command - fixed
= 3 position command - spring return to B from A and C
= 3 position command - spring return to B from A fixed at C
RSX = 3 position command - spring return to B, fixed at C
W
1
2
= 2 position command - fixed
C
C
1
A
B
B
Z
01 - G
= 3 position command - spring return to B from C and A
= Command with spring return
2
A
1
2
B
A
1
2
1
2
1
2
A
B
C
A B
1
X
C
A
B
C
A
B
C
A
B
C
RSX
A
B
C
W
C B A
1
X
A
B
C
C
1
Z
X
C B
1
A
B
A
B
C
M
A
B
1
X
2
X
2
X
1
X
X
2
X
1
X
X
2
X
1
X
X
2
X
1
X
2
X
1
X
Ex e Custom assembly request
Customer Informaton
Company:
Name:
Job title:
Email:
Contact No:
Material and Size
Aluminium
Stainless Steel
110 x 110 x 85 (all)
170 x 110 x 85 (all)
147 x 147 x 100 (all)
305 x 230 x 110 (all)
305 x 230 x 190 (all)
470 x 305 x 190 (SS)
38mm E-Stops
Qty
1
Type
T
TG
TP
K
Required Operators
Pushbuttons
Indicators
Contacts
Qty
A
B
C
D
Colour
Green
Red
Clear
Blue
Yellow
Qty
Colour
Green
Red
Clear
Blue
Yellow
E
F
G
H
I
GRP
305 x 147 x 110 (all)
620 x 305 x 185 (GRP, SS)
Selector Switch
Contacts
Qty
J
K
L
M
N
Type
2
3
2S
3S
C1
C2
Contacts
O
P
Q
R
S
T
Label Requests: 1A:
Required Entries
Enter the desired number of entries and accessories for each side.
A
B
C
D
C/Glands
Side A
Plugs
M16x
M20x
M25x
Side
B
Side
D
M32x
x
x
Side C
Special Requests:
TG= Twist+Guard
(A-B)
(A B)
(C-B A)
➔
➔
T = Twist
2 = 2pos command
2S = 2pos spring
C1 = Combo1 T = Twist+P/Lock
2 = 2pos command
2S = 2pos spring
C1 = Combo1 K = Key
(A-B-C)
(C➔B➔A)
(C B-A)
➔
* Type selection:
Emergency Stop Operator:
Selector Switch Operator:
3
Ex e command and control operators
Increased safety enclosures
Zones 1, 2 & 21, 22
IECEx CES 11.0029U issue 0
Ex e IIC Gb
Ex tb IIIC Db IP 66
Features:
Operators consists of a black anodised aluminium housing, silicone seals and stainless
steel pins and springs.
Characteristics:
• High mechanical strength
• High operational reliability and cost efficiency
• Reduced maintenance costs
• Rated voltage: 690 V
• Frequency: 50/60 Hz
• Range: 10 A
• Connection: max. 2.5 mm2
• Rated impulse withstand voltage: 4 kV
• Pollution degree: 2
• Short circuit conditional current : 1 kA
• Minimum positive opening travel: 3 mm
• Minimum force required for operation: 5 N
• Maximum stroke (+ overtravel): 4.75 mm
• Weight: 40 g
3-12
Ex e command and control operators
Cat. No.
Black
M-0603/N
Black – lockable
M-0603/NL
Red
M-0603/R
Red - lockable
M-0603/RL
Green
M-0603/V
Yellow
M-0603/G
Blue
M-0603/B
White
M-0603/BI
Description
Cat. No.
Ex e Mushroom pushbutton – twist to release
M-0605
Ex e Mushroom pushbutton – key to release
M-0605K
Description
Cat. No.
Ex e Selector switch complete with contact set**
M-0604/**
Increased safety enclosures
M-0603/R
Description
3
M-0605
**Refer control station selection chart
M-0604/01
Description
Cat. No. 1)
Blue
M-0612/B_
Colourless
M-0612/I_
Yellow
M-0612/G_
Red
M-0612/R_
Green
M-0612/V_
M-0612/V
Notes: 1) To complete the Cat. No. insert the voltage:
24 for 24 V AC/ DC Voltage
110 for 110 V AC/ DC Voltage
230 for 230 V AC Voltage
3-13
4
Switching and field devices
Switching and field devices
Selection chart
4-2
PY / SPY series
4-4
Plugs and sockets
Isolators/switches
CSC series – 16 A
EFSCO series – 25/63 A
4-6
4-7
Limit switches
Zinc die cast – EEx 335 series Thermoplastic – EEx T 356 series Thermoplastic – EEx 14 series
4-8
4 - 10
4 - 12
Safety/Interlock switches
Zinc die cast – EEx AZ and EEx 335 AZ series
Solenoid interlock – EEx AZM/AZP 415 series Thermoplastic – EEx ST 14 Series 4 - 14
4 - 16
4 - 17
Pull-wire switches
Zinc die cast emergency – EEx ZS 80 series
Zinc die cast – EEx ZS series Aluminium emergency – EX 5540 series
4 - 18
4 - 19
4 - 22
EEx GFS series
4 - 23
EEx ZS series
4 - 24
Foot switches
Belt alignment switches
Safety sensors
Thermoplastic rectangular
Nickel/brass, stainless cyclndrical – EEx RC Si M30
4 - 26
4 - 27
Ex Inductive sensors
EEx IS series
4 - 28
EEx RC M20 Series
4 - 29
Magnetic sensors
LIMIT SWITCHES
ROTARY SWITCHES
PLUGS AND SOCKETS
FOOT SWITCHES
SAFETY SENSORS
4
Switching and field devices
Selection chart
Switching and field devices
Description
Plugs and sockets
PY/SPY Series
- 16 A and 32 A
Protection
Technique Zone 0 Zone 1 Zone 2 Zone 20 Zone 21 Zone 22 Group
Ex d/ Ex tD
3
3
3
3
IIC
Ex d/ Ex tD
3
3
3
3
IIC
Ex d/ Ex tD
3
3
3
3
IIC
Ex d/ Ex td
3
3
3
3
IIC
Ex de/ Ex tD
3
3
3
3
IIC
- 3, 4, 5 pole options
- IP66 rating
Isolators / switches
CSC/ EFSCO Series
- 16, 25 and 63 A
- 1, 2, 3 and 4 pole options
- 20 to 415 V AC
- IP66 rating
Limit switches
- Thermoplastic, aluminium or
Zinc die cast bodies
- 12 different actuator options
- IP65/ 66/ 67 rating
Safety / Interlock switches
- Thermoplastic, aluminium,
Zinc die cast or steel bodies
- Solenoid switches available
- IP65/67
Pull-wire switches
- Aluminium or Zinc die cast bodies
- Multiple configurations
- IP65/67
4-2
4
Protection
Technique Zone 0 Zone 1 Zone 2 Zone 20 Zone 21 Zone 22 Group
Foot switches
EEx GFS Series
- With or without protective shield
Ex de/ Ex tD
3
3
3
3
IIC
Ex de/ Ex tD
3
3
3
3
IIC
- Thermoplastic rectangular or
Ex mb/ Ex
3
3
3
3
II
- Nickel/Brass, stainless cylindrical
tD
3
3
3
3
II
3
3
3
3
II
- Metal enclosure
- IP65
Belt Alignment switches
EEx ZS Series
- Standard and heavy duty versions
- IP65
Safety sensors
EEx RC Si Series
Switching and field devices
Description
Inductive sensors
EEx IS Series
- Thermoplastic rectangular or
Ex mb/ Ex
Nickel/Brass, stainless cylindrical
tD
3
3
Magnetic Sensors
EEx RC M20 Series
- Nickel plated brass
Ex mb/ Ex
- Up to 30mm sensing distance
tD
4-3
4
Plugs and sockets
PY/SPY series
Switching and field devices
Zones 1, 2 & 21, 22
IECEx CES 11.0011X
Ex d IIC T5
Ex tD A21
IP 66
PY/SPY
Features:
The PY series sockets, complete with interlocked disconnection switch, can be used in all
environments with potential explosive atmosphere. These sockets, even if supplied with the plugs
SPY are conceived so as not to allow the coupling with standard industrial type plugs. The ring
colour indicates the suitable power voltage. Supplied with reducers / adaptors for cable entries.
Sockets are supplied with 2 x reducers/ adaptor.
Dimensions (mm)
Dimensions (mm)
A
B
C
Y
X
W
Metric Entries
Weight
(Kg)
Cat No.
Ø 90
165
135
104
50
8
2x M20 or M25
1.7
PY..16..
Ø 120
240
175
140
80
8
2x M20, M25 or M32
2.1
PY..32..
Ø 66
116
-
-
-
-
1x M20 or M25
0.3
SPY..16
Ø 92
145
-
-
-
-
1x M20, M25 or M32
0.6
SPY..32..
Ød
* Full selection guide on next page
4-4
4
Plugs and sockets
PY/SPY series cont.
16 1)
Number
of poles
Frequency
(Hz)
Rated
voltage
(V)
2P + E
50/60
2P +E
Entries
Socket
2 x M20 or 2P +E
M25
Socket
Cat. No.
Plug
Cat. No.
200/250
PY216B*
SPY216B*
50/60
100/130
PY216G*
SPY216G*
50/60
40/50
PY216BI*
SPY216BI*
Plug
3P + E
1x M20 or
M25
50/60
200/250
PY316B*
SPY316B*
3P + E
50/60
20/25
PY316V*
SPY316V*
3P + E
50/60
380/415
PY316R*
SPY316R*
2P +E
50/60
200/250
PY232B*
SPY232B*
2P+E
50/60
100/130
PY232G*
SPY232G*
3P + E
50/60
200/250
PY332B*
SPY332B*
3P + E
50/60
380/415
PY332R*
SPY332R*
3P + N + E
50/60
200/250
PY432B*
SPY432B*
3P + N + E
50/60
380/415
PY432R*
SPY432R*
3P + N + E
50/60
500
PY432N*
SPY432N*
Socket
2x M20,
M25 or
M32
32 2)
Plug
1x M20,
M25 or
M32
Arrangement
Switching and field devices
Rated
current
(A)
Entries
Notes: * Add M20, M25 or M32 to part number to indicate entry size required
For Plugs use PLG2B for 16 A or PLG3B for 32 A
4-5
4
Isolators
CSC series – 16 A
Switching and field devices
Zones 1, 2 & 21, 22
IECEx TSA 06.0009
Ex d IIC T6
Ex tD A21
IP 66
Features:
CSC series isolators, switches and changeover switches are rotary type 16 A models with
control handle on the cover. Supplied with reducers/adaptors for cable entries.
CSC216
Dimensions (mm)
Entries
Current (A)
Poles
Weight (Kg)
Cat. No.
2 x M20
16
2
0.84
CSC-216-M20
2 x M20
16
4
0.88
CSC-416-M20
2 x M25
16
4
0.88
CSC-416-M25
Note: For stopping plug use PLG3B
Adaptors supplied for cable entries
4-6
4
Isolators/switches
EFSCO series – 25/63 A
IECEx TSA 06.0009
Ex d IIC T6
Ex tD A21
IP 66
Features:
EFSCO-24
The EFSCO series isolators, switches and changeover switches are rotary type 25, 50 and
63 A models with control handle on the cover. The construction materials are suitable for chemically
aggressive environments, also for offshore. Supplied with reducers/adaptors for cable entries.
For 25 A isolators / switches use plug PL3GB
For 63 A isolators / switches use stopping plug PLG5B
Dimensions (mm)
Switching and field devices
Zones 1, 2 & 21, 22
Isolator switches
Current
(A)
D
Poles
(ISO 7/1)
A
L
I
Weight
(Kg)
Cat. No.
25
4
2 x M20
140
110
60
1.18
EFSCO-24-M20
25
4
2 x M25
140
110
60
1.18
EFSCO-24-M25
25
4
2 x M32
140
110
60
1.18
EFSCO-24-M32
63
3
2 x M25
160
120
80
1.4
EFSCO-63-M25
63
3
2 x M32
160
120
80
1.4
EFSCO-63-M32
Changover switch without off
Current
(A)
Poles
D
(ISO 7/1)
A
L
I
Weight
(Kg)
Cat. No.
25
2
2 x M20
140
110
60
1.18
EFSCO-266-M20
25
2
2 x M25
140
110
60
1.18
EFSCO-266-M25
63
1
2 x M25
160
120
80
1.4
EFSCO-66-M25
Changeover switch with off
Current
(A)
Poles
Cable
entries
A
L
I
Weight
(Kg)
Cat. No.
25
2
2 x M20
140
110
60
1.18
EFSCO-244-M20
25
2
2 x M25
140
110
60
1.18
EFSCO-244-M25
63
1
2 x M25
160
120
80
1.4
EFSCO-642-M25
Note: Adaptors supplied for cable entries
4-7
4
Limit switches
Zinc die cast – EEx 335 series
Switching and field devices
Zones 1, 2 & 21, 22
IECEx BVS 07.0014
Ex de IIC T6/ T5
Ex tD A21
IP 67
EEx 335 4VH 1O/ 1S*
Features:
• Metal enclosure
• M20 x 1.5 cable entry
• Slow action positive break contacts
• Actuator heads can be re-positioned in steps 4 x 90 degrees
These Ex safety position switches are suitable for sliding and hinged safety guards, which need
to be closed to ensure necessary operational security.
The housings are European DIN standard with a large range of actuating styles are available.
Technical data:
EEx 335 R 1O/ 1S*
4-8
Enclosure
Protection class
Switching system
Cable section/ Termination
Ie/ Ue
Ambient temperature
Mechanical life
Operating rate
Zinc die-cast, enameled
IP 67
Slow action, positive break N/C Contact
M3 screw clamps, max. 1.5 mm2
6 A/ 250 V AC (AC-15); 0.25 A/ 230 V DC (DC-13)
- 20°C to + 60 °C
> 1 million
Max. 1800/ hour
Actuator style
Contactor
Cat. No.
Plunger
1 N/O and 1 N/C
EEX 335 S 1O/1S
Roller plunger
1 N/O and 1 N/C
EEX 335 R 1O/1S
Roller lever
1 N/O and 1 N/C
EEX 335 1K 1O/1S
Angled roller lever
1 N/O and 1 N/C
EEX 335 3K 1O/1S
Rocking roller lever
1 N/O and 1 N/C
EEX 335 4VH 1O/1S
Long rocking roller lever
1 N/O and 1 N/C
EEX 335 4V3H 1O/1S
Adjustable rocking lever
1 N/O and 1 N/C
EEX 335 4V7H 1O/1S
Rod lever
1 N/O and 1 N/C
EEX 335 4V10H 1O/1S
4
Limit switches
Zinc die cast – EEx 335 series cont.
EEx 335 SERIES
EEx 335 S 10/1S
EEx 335 R 10/1S
EEx 335 1K 10/1S
EEx 335 3K 10/1S
EEx 335 4VH 10/1S
EEx 335 4V3H 10/1S
EEx 335 4V7H 10/1S
Switching and field devices
Dimensions (mm)
EEx 335 4V10H 10/1S
4-9
4
Limit switches
Thermoplastic – EEx T 356 series
Switching and field devices
Zones 1, 2 & 21, 22 (DIP)
IECEx PTB 06.0053X – EEx 13 (contact block)
Ex d IIC T6/T5
Ex tD A21
IP 65
Features:
EEx T 4VH 356 2M *
Technical data:
EEx T 4V7H 356 2M *
EEx TR 356 10/1S 2M *
4-10
• GRP thermoplastic and metal body enclosures
• Slow action positive break contacts
• Pre-wired cable - 2 m (standard) or 5 m (optional)
• Actuator heads can be re-positioned in 4 x 90 degrees steps
These Ex safety position switches are suitable for sliding and hinged safety guards, which need
to be closed to ensure necessary operational security. The housings are European DIN standard
with a large range of actuating styles available.
Cover Body
Degree of protection
Contact operation
Type of termination
Ie/ Ue
Ambient temperature
Mechanical life
Operating rate
Glass fibre reinforced, thermoplastic
Zinc die-cast, enamelled
IP 65
Slow action, N/C with positive break
Embedded cable - 4 x 0.75 mm2
6 A/ 250 V AC (AC-15)
4 A/ 24 V DC (DC-13)
-25 °C to + 65 °C
1 million switching cycles
Max. 1,800 ops/ hour
Description
Contacts
Cable length
Cat. No.
Rocking roller lever
1 N/O + 1 N/C
2m
EEX T4VH 356 2M
Adjustable rocking lever
1 N/O + 1 N/C
2m
EEX T4V7H 356 2M
Rod lever
1 N/O + 1 N/C
2m
EEX T4V10H 356 2M
Roller plunger
1 N/O + 1 N/C
2m
EEX TR 356 1O/1S 2M
Plunger
1 N/O + 1 N/C
2m
EEX TS 356 1O/1S 2M
Limit switches
Thermoplastic – EEx T 356 series cont.
EEx TR 356 10/1S...
EEx T4VH 356 10/1S...
EEx T4V10H 356 10/1S...
EEx TS 356 10/1S...
Switching and field devices
Dimensions (mm)
4
EEx T4V7H 356 10/1S...
EEx T 356 Series
4-11
4
Limit switches
Thermoplastic – EEx 14 series
Switching and field devices
Zones 1, 2 & 21, 22
IECEx PTB 06.0098X
Ex d IIC T6/T5
Ex tD A21
IP 65
EEx 14 10/1S
Features:
• Thermoplastic enclosure
• Double insulated
• IP 65
• Slow action positive break contacts
• Pre-wired cable (1 m)
These Ex safety position switches are suitable for sliding and hinged safety guards, which need
to be closed to ensure necessary operational security.
EEx 14 TL 10/1S
Actuator style
Straight plunger
Contactor
1 N/O and 1 N/C
Cat. No.
EEX 14 1O/1S
Straight plunger (with collar)
1 N/O and 1 N/C
EEX 14 W 1O/1S
Ball plunger
1 N/O and 1 N/C
EEX 14 KU 1O/1S
Plunger (for front mounting)
1 N/O and 1 N/C
EEX 14 F 1O/1S
Roller plunger (with collar)
1 N/O and 1 N/C
EEX 14 WR 1O/1S
Cat’s whisker
1 N/O and 1 N/C
EEX 14 TL 1O/1S
Spring rod (with metal tip)
1 N/O and 1 N/C
EEX 14 TF 1O/1S
Roller lever
1 N/O and 1 N/C
EEX 14 D 1O/1S
Roller lever
1 N/O and 1 N/C
EEX 14 DL 1O/1S
Dimensions (mm)
EEx 14 D 10/1S
4-12
4
Limit switches
Thermoplastic – EEx 14 series cont.
EEx 14
EEx 14 D 1O/1S
EEx 14 DL 1O/1S
EEx 14 F 1O/1S
EEx 14 KU 1O/1S
EEx 14 WR 1O/1S
EEx 14 TL 1O/1S
EEx 14 TF 1O/1S
EEx 14 W 1O/1S
Switching and field devices
Dimensions (mm)
4-13
4
Safety/interlock switches
Zinc die cast – EEx AZ and EEx 335 AZ series
Switching and field devices
Zones 1, 2 & 21, 22
IECEx PTB 06.0053X – EEx AZ 13 (contact block)
IECEx BVS 07.0014 – EEx 335 AZ
Ex d IIC T6, T5
Ex tD A21 IP 65
Features:
EEx AZ 16 1O/1S
• Multiple coding of the actuator
• Slow action, double-break changeover contact
The switching element is not physically connected to the actuator but functionally brought
together or separated by switching. When the switch is actuated, the actuator is separated from
the base unit. During this process, the N/C contacts of the safety switch are positively opened and
the N/O contacts closed.
Technical data:
EEx 335 AZ 1O/1S
Enclosure
EEx AZ 16
EEx 335 AZ
Actuator
Protection class
Switching system
Cable section/termination
EEx AZ 16
EEx 335 AZ
Ie/ Ue
Ambient temperature
Mechanical life
Glass fibre reinforced thermoplastic
Zinc die casting, enameled
Stainless steel 1.4301
IP 65
Slow action, positive break N/C contact
Embedded Cable - 4x 0.75 mm2 (2 m or 5 m)
M3 screw clamps, max 1.5 mm2
6 A/ 250 V AC (AC-15)
4 A/ 24 V DC (DC-13)
-20 ºC to +65 ºC
> 1 million operations
Safety Interlock Switches
Contacts
1N/O + 1N/C
1N/O + 1N/C
1N/O + 1N/C
1N/O + 1N/C
Latching force
5N
5N
30 N
30 N
1N/O + 1N/C
Cable length
2m
5m
2m
5m
Cat. No.
EEX AZ16 1O/1S 2M
EEX AZ16 1O/1S 5M
EEX AZ16 1O/1S 30 N2
EEX AZ16 1O/1S 30 N5
2m
EEX 335 AZ 1O/1S
Actuators
Actuators
Straight
Side adjustable
Front adjustable
Fully adjustable
Straight
Angled actuator
Flexible actuator
4-14
Series
EEx AZ 16
EEx 335 AZ
Cat. No.
AZ15/16B1
AZ15/16B2
AZ15/16B3
AZ15/16B6
AZ335/355B
AZ335/355B5
AZ335/355B6
Safety/interlock switches
Zinc die cast – EEx AZ and EEx 335 AZ series cont.
EEx AZ 16
EEx 335 AZ
AZ 335/335-B1
Switching and field devices
Dimensions (mm)
4
AZ 15/16-B1
AZ 15/16-B2
AZ 335/335-B5
EEx 335 AZ
AZ 15/16-B3
AZ 335/335-B6
AZ 15/16-B6
AZ Actuating radius
4-15
4
Safety/interlock switches
Solenoid Interlock – EEx AZM/AZP 415 series
Switching and field devices
Zones 1, 2 & 21, 22
IECEx BVS 07.0018X
Ex demb IIC T6/ T5
Ex tD A21
IP 67 T 80 °C/ T 95 °C
EEe AZM 415 20/2S-A*
•
•
•
•
•
•
•
•
Aluminium/ steel enclosure
2 x M20 cable entries
Two Ex switch inserts in one enclosure
Spring-to-lock or power-to-lock principle (EEx AZM 415)
Release by means of pneumatic cylinder (EEx AZP 415)
Problem-free opening of stressed doors by means of bell-crank system
High holding force 3,500 N
Ball catch/ wiring compartment
Technical data:
EEe AZP 415 20/2S*
EEx AZM/AZP 415 Series
4-16
Features:
Enclosure/ cover
Actuator/ locking bolt Protection class
Switching system
Switching elements
Termination/ cable section
Ie/ Ue
Us
AZM/ AZP
Magnet
AZM/ AZP
Unlocking
AZM/ AZP
Ambient temperature AZM/ AZP
Mechanical life
Holding force F
Aluminium die-casting/ steel, enameled
Metal zinc/ aluminium
IP 67
Slow action, positive break N/C contact
Change-over contact with double break
Zb galvanically separated contact bridges
M3 screw clamps, max. 2.5 mm2
6 A/250 V AC (AC-15); 40 mA/24 V DC
24 V DC / Pneumatic
100% ED/ 100% ED/ max. 3 to 7 bar
-20°C ... +55°C / -20°C ... +65°C
> 1 million operations
Max. 3500 N
Type
Solenoid
Contacts
Cat. No.
Solenoid lock
Power-to-lock
2 N/O and 2 N/C
EEX AZM 415 20 /2S-A
Solenoid lock
Power-to-release
2 N/O and 2 N/C
EEX AZM 415 20 /2S-R
Pneumatic valve
-
2 N/O and 2 N/C
EEX AZP 415 20 /2S
Actuators
Cat. No.
Flexible actuator (vertical)
AZM 415 B2
Flexible actuator (horizontal)
AZM 415 B3
4
Safety/interlock switches
Thermoplastic – EEx ST 14 series
IECEx PTB 06.0098X
Ex d IIC T6/ T5
Ex tD A21
IP 65
Features:
• Thermoplastic enclosure
• Double insulation
• Slow action, double-break changeover contact
• Slow action with overlapping contacts available
• Pre-wired cable, 1 metre (bottom or side)
EEx ST 14 1O/1S
The switching element of this slimline style switch is not physically connected to the actuator but
functionally brought together or separated by switching. When the switch is actuated, the actuator is
separated from the base unit. During this process, the N/C contacts of the safety switch are positively
opened and the N/O contacts closed. A wide range of coded actuators, also suitable for small radii, is
available for the Ex door contacts with positive break.
Switching and field devices
Zones 1, 2 & 21, 22
Switch and Accessories
Description
Cat. No.
Switch 1 N/O and 1 N/C (without actuator)
EEX ST 14 1O/1S
Switch 2 N/C (without actuator)
EEX ST 14 2O
Actuator straight
ST 14 B1
Actuator flexible
ST 14 B3
Actuator angled
ST 14 B5
Dimensions (mm)
EEx ST 14...
Straight actuator
ST 14 B1
Flexible actuator
ST 14 B3
Angled actuator
ST 14 B5
4-17
4
Pull-wire switches
Zinc die cast emergency – EEx ZS 80 series
Switching and field devices
Zones 1, 2 & 21, 22
IECEx BVS 07.0034X
Ex de IIC T6, T5
Ex tD A21
IP 65
Features:
EEx ZS 80 1O/1S WVD
•
•
•
•
•
•
•
Metal enclosure, with GRP thermoplastic cover
Position indicator and integrated emergency-stop pushbutton
Lever for release and position indication
Slow action positive break N/C contacts
Wire pull and breakage function
Wire up to 75 m long/ pre-tensioning force 100 N
Pre-wired cable (3 metres)
Ex emergency pull-wire switches are used on machines and plants which cannot be safeguarded by
safety covers. In contrast to an Ex emergency-stop pushbutton the emergency pull-wire switch can
be actuated from any point along the wire.
The EEx ZS 80 switch status is indicated by a position indicator. The switches operating elements
comprise of an ergonomic reset lever, which is used to reset the unit after an emergency stop,
and an additional emergency stop pushbutton. The reset lever also doubles as an indicator of the
switches current status.
Technical data:
Cover
Body
Protection class
Switching system
Type of termination
Ie/ Ue
Ambient temperature
Mechanical life
Description
Emergency
Pull-wire
Switches
4-18
Glass fibre reinforced, thermoplastic
Aluminium die-cast, enamelled
IP 65
Slow action, positive break N/C contact
Embedded cable - 4 x 0.75 mm2
6 A/ 250 V AC (AC-15)
0.25 A/ 230 V DC (DC-13)
-25 °C to + 65 °C
1 million switching cycles
Cable
Contacts
Length
1 N/O + 1 N/C 3 M
Reset
Lever
Wire
Actuator length
Top
75 m
Cat. No.
EEX ZS 80 1O/ 1S WVD
2 N/C
Lever
Top
EEX ZS 80 2O WVD
3M
75 m
4
Pull-wire switches
Zinc die cast – EEx ZS series
IECEx BVS 07.0034X
Ex de IIC T6, T5
Ex tD A21
IP 65
Features:
EEx ZS 71 10/1S WVD
•
•
•
•
•
•
Metal enclosure, with GRP thermoplastic cover
Slow action positive break N/C contacts
Actuator heads top or side actuated
Reset via pushbutton, or key
Wire up to 20 m (71 series) and 50 m (73/75 series) long
Pre-wired cable (3 metres)
Ex pull-wire switches are used on machines and plants which cannot be safeguarded by safety covers. In
contrast to an Ex emergency-stop pushbutton the emergency pull-wire switch can be actuated from any
point along the wire.
Switching and field devices
Zones 1, 2 & 21, 22
Technical data:
EEx ZS 73 10/1S WVD
Cover
Body
Protection class
Switching system
Type of termination
Ie/ Ue
Ambient temperature
Mechanical life
Desc.
Pull-wire
switch
Glass fibre reinforced, thermoplastic
Aluminium die-cast, enamelled
IP 65
Slow action, positive break N/C contact
Embedded cable - 4 x 0.75 mm2
6 A/ 250 V AC (AC-15)
0.25 A/ 230 V DC (DC-13)
-25 °C to + 65 °C
1 million switching cycles
Contacts
1 N/O + 1 N/C
Cable
length
3m
Reset
Pushbutton
Actuator
Top
Wire
length
20 m
Cat. No.
EEX ZS 71 1O/1S WVD
2 N/C
3m
Pushbutton
Top
20 m
EEX ZS 71 2O WVD
1 N/O + 1 N/C
3m
Pushbutton
Side
50 m
EEX ZS 73 1O/1S WVD
1 N/O + 1 N/C
3m
Key
Side
50 m
EEX ZS 73 1O/1S WVS
2 N/O + 2 N/C
3m
Pushbutton
Side
50 m
EEX ZS 75 2O/2S WVD
EEx ZS 75 20/2S WVD
4-19
4
Pull-wire switches
Zinc die cast Emergency – EEx ZS 80 series cont.
Switching and field devices
Dimensions (mm)
EEx ZS 71 1O/1S WVD
EEx 71
Recommended wire length
EEx ZS 71 1O/1S WVD
EEx 75
Recommended wire length
4-20
EEx ZS 73 1O/1S WVD
EEx 73
Recommended wire length
EEx ZS 71 1O/1S WVD
EEx 80
Recommended wire length
Increase productivity through
technology with a partner you can trust
With over 45 years of
service and experience,
NHP are proud
providers of heavy
duty solutions for
the Australian mining
industry.
Our expert knowledge and
extensive power distribution
and motor control portfolio
utilises leading technology to
enable integrated process and
plant control whilst delivering
cost savings through increased
productivity and enhanced
safety.
A partnership with NHP unlocks
an extensive network of global
suppliers that enable the agility
to customise solutions that
are ideal for harsh application
environments and are designed
according to the local market.
NHP understand the critical
challenges that need to be
overcome to gain a competitive
edge and incorporate an
extensive range of low and
medium voltage, Ex and non Ex
products to help you achieve
success for your project.
NHP ELECTRICAL ENGINEERING PRODUCTS PTY LTD
EASY TO DO BUSINESS WITH
Sales 1300 NHP NHP | nhp.com.au |
HAE Catalogue > Section 4: Switching & Field Devices > Magnetic Reed Switches – EEx RC M70 Series
4
Pull-wire switches
Aluminium emergency – EX 5540 series
Switching and field devices
Zones 21 & 22
ANZ Ex 05.4008X
Features:
EX55400NBB
•
•
•
•
•
•
•
Non ferrous components used throughout
Heavy duty cast aluminium construction
Protection class IP 65 and IP 67 hoseproof and dustproof
Complies with AS/NZ 61241
Unique powdercoated epoxy finish
Tamper proof lid screws
Double sided operation
Standard switch
Description
Cat. No.
Standard switch with 2
EX55400NBB
N/O + 2 N/C contact block
Switch with glass
window Cat. No.
Switch with lid mounted
pilot light Cat. No.
EX55400GWNBB
EX55401NBB
Accessories:
55.1.50
Actuators
Cat. No.
Trip-wire support – stainless steel
55.1.50SS
5 mm thimble
55.1.51
5 mm wire clamp
55.1.52
Galvanised 6/19 trip-wire (4 mm diameter)
55.1.53
Red PVC coated 6/19 trip-wire (5 mm diameter)
55.1.53P
Turnbuckle 10 mm x 145 mm
55.1.64
Tension spring
55.2.46
Tension spring stainless steel
55.2.46SS
Shackle stainless steel
55.2.19
Spare contact 1 N/O + 1 N/C
NBA
Spare contact 2 N/O + 2 N/C
NBB
Gold contact 1 N/O + 1 N/C for PLC applications
NBAG
Gold contact 2 N/O + 2 N/C for PLC applications
NBBG
Dimensions (mm)
55.1.52
4-22
4
Foot switches
EEx GFS series
IECEx PTB 06.0098X – EEx 14 (contact block)
Ex de IIC T6
Ex tD A21
IP 65
EEx GF 1O/1S
Features:
•
•
•
•
•
•
With and without protective shield
Metal enclosure
Metal shield (EEx GFS)
Low pedal height
Slow action positive break contacts
Pre-wired cable (3 metres)
Ex foot switches are mounted on machines and plants in cases where operation using the hands is
not possible. They are used to start and stop operations and production processes. Depending on the
environmental conditions and mechanical duty, differing versions are used.
The foot switches can be provided with a protective shield to prevent accidental actuation.
Switching and field devices
Zones 1, 2 & 21, 22
Technical data:
EEx GFS 1O/1S
Enclosure
Cover (EEx GF)
Protective shield
(EEx GFS)
Pedal
Protection class
Switching system
Type of termination
Ie/ Ue
Ambient temperature
Mechanical life
Operating rate
Description
Foot switches
Aluminium die casting, enamel finish, RAL 5011
Glass fibre reinforced thermoplastic
Aluminium die casting, enamel finish, RAL 5011
Glass fibre reinforced thermoplastic
IP 65
Slow action, positive break N/C contact
Embedded cable - 4 x 0.75 mm2
6 A/ 250 V AC (AC-15)
4 A/ 24 V DC (DC-13)
-25 °C to + 65 °C
1 million switching cycles
max. 1,800 ops/ hour
Foot switch
No guard
Contacts
1 N/O + 1 N/C
Cable length
3m
Cat. No.
EEX GF 1O 1S
Guarded
1 N/O + 1 N/C
3m
EEX GFS 1O 1S
Dimensions (mm)
4-23
4
Belt alignment switches
EEx ZS series
Switching and field devices
Zones 1, 2 & 21, 22
IECEx PTB 06.0098X – EEx 14 (contact block)
Ex de IIC T6
Ex tD A21
IP 65
Features:
•
•
•
•
•
EEx ZS 73 SR 1O/1S VD
Metal enclosure, with GRP thermoplastic cover
Slow action positive break contacts
Stainless steel actuator head
Reset via pushbutton
Pre-wired cable (3 metres)
Ex belt-alignment switches are suitable for applications with handling equipment. The Ex beltalignment switches are actuated when the conveyer belt becomes misaligned. Depending on the
plant arrangements, this signal can either be used to switch the equipment off or to provide automatic
correction of the belt alignment.
Technical data:
Cover
Body
Protection class
Switching system
Type of termination
Ie/Ue
Ambient temperature
Mechanical life
Operating rate
Description
EEx ZS 75 SR 2O/2S VD
4-24
Belt alignment
Glass fibre reinforced, thermoplastic
Aluminium die-cast, enameled
IP 65
Slow action, positive break N/C contact
Embedded cable - 4 x 0.75 mm2
6 A/ 250 V AC (AC-15)
4 A/ 24 V DC (DC-13)
-25 °C to + 65 °C
1 million switching cycles
Max. 1,800 ops/ hour
Contacts
Cable length
Reset
Cat. No.
1 N/O + 1 N/C
3m
Pushbutton
EEX ZS 73 SR 1O/1S VD
2 N/O + 2 N/C
3m
Pushbutton
EEX ZS 75 SR 2O/2S VD
Belt alignment switches
EEx ZS series cont.
EEx ZS 73 SR 1O/1S
Switching and field devices
Dimensions (mm)
4
EEx ZS 75 SR 2O/2S
4-25
4
Safety sensors
Thermoplastic rectangular
Switching and field devices
Zones 1, 2 & 21, 22
IECEx PTB 08.0042 X
Ex mb II T6/T5,
Ex tD A21
IP 67 T80 °C/T95 °C
Features:
EEx RC SI 56
•
•
•
•
•
•
•
Thermoplastic enclosure
24 V DC switching
Pre-wired cable
Coded reed contacts
Actuation from front
Switching distance up to 6 mm
Designed for use in conjunction with a safety relay.
Description
1 NC/1 NO contact (3 m cable)
Cat. No.
EEX RC SI 56 10/1S 3M
2 N/C contacts (3 m cable)
EEX RC SI 56 20 3M
Actuator for EEx RC Si 56
EEX MC 56
1 N/O / N/C contact (3 m cable)
EEXH3514101SSM
2 N/C contacts (3 m cable)
EExHSS14203M
Actuator for EExHSS14
EExMC4
*Note: The actuator is not included with the switch
Dimensions (mm)
EEx HS SI 514
EEx RC SI 56
EEx HS SI 14
4-26
HAE Catalogue > Section 4: Switching & Field Devices > Safety Sensors > Thermoplastic Rectangular – EEx RC Si 56
EEx MC 56
EEx MC4
Safety sensors
Nickel/brass, stainless cyclndrical – EEx RC Si M30
IECEx PTB 07.0008 X
Ex mb II T6,
Ex tD A21
IP 67 T80 °C
Features:
EEx RC Si M30
• M30 barrel type safety sensor
• Nickel plated brass and stainless steel bodies available
• 24 V DC switching
• Pre-wired cable
• Coded reed contacts
• Actuation from front
• Switching distance up to 8 mm
• Designed for use in conjunction with a safety relay.
Description
Cat. No.
2 N/C contacts stainless steel (6 m cable)
EEX RC SI M30 206M
2 N/C contacts nickel plated brass (3 m cable)
EEX RC SI M30 203M
Actuating magnet / brass
EEX MC30
Actuating magnet / SS
EEX MC30N1RO
Switching and field devices
Zones 1, 2 & 21, 22
4
*Note: The actuator is not included with the switch
Dimensions (mm)
EEx RC Si M30
4-27
4
Ex Inductive sensors
EEx IS series
Switching and field devices
Zones 0,1 2 & 20, 21, 22
IECEx IMQ 14.0001X
Ex ia IIC T6 Ga
Ex ia IIIC T85°C Da
IP 68
Features:
EEx IS M8 B
•
•
•
•
•
•
•
Stainless steel enclosure
Flush or non-flush mounting
LED indicator
Pre-wired 2 m cable
8.2 V DC 2 wire Namur switching
Suitable for the food processing industry
Designed to be used with intrinsically safe isolators, refer section 7
Dimensions (mm)
Body Size Mounting
M8
Shielded (flush mounting)
Switching Distance A
1 mm
30
B
C
D
30
n/a
n/a EEXISM8B
Cat No.
EEXISM8NB
M8
Unshielded (non-flush)
2 mm
30
30
5
8
M12
Shielded (flush mounting)
2 mm
40
28
n/a
n/a EEXISM12B
EEXISM12NB
M12
Unshielded (non-flush)
4 mm
40
28
7.5
12
M18
Shielded (flush mounting)
5 mm
50
28
n/a
n/a EEXISM18B
EEXISM18NB
M18
Unshielded (non-flush)
8 mm
49
28
10.5 18
M30
Shielded (flush mounting)
10 mm
45
28
n/a
n/a EEXISM30B
M30
Unshielded (non-flush)
15 mm
44
28
15
30
EEXISM30NB
Flush mounting
Sensing distance correction factors
Steel (Fe360) = 1
Stainless steel approx. 0.7
Brass approx. 0.5
Aluminium approx. 0.4
Non-flush mounting
4-28
4
Magnetic sensors
EEx RC M20 series
IECEx BVS 07.007X
Ex mb II T6
Ex tD A21
IP 67
Features:
• Nickel-plated brass enclosure
• Long life
• 1 magnetic reed contact
• Actuation from front, actuation from side only for bistable contacts
• Switching distance up to 30 mm depending on the actuating magnets
• Pre-wired cable, 1 metre
EEx RC M20 1W
The Ex magnetic sensors are actuated by an M range permanent magnet, entering their proximity
without any physical contact.
These devices are available with N/O, N/C, changeover, bistable or bistable changeover contacts.
All magnetic sensors are supplied with pre-wired cables. When using Ex magnetic sensors, care
must be taken that their mounting site is free of magnetic fields.
Description
Cat. No.
1 C/O Front actuation
EEx RC M20 1W
1 C/O Bistable front actuation
EEx RC M20 1Wr
Actuator magnet 23 mm diameter
M300UB
Switching and field devices
Zones 1, 2 & 21, 22
Dimensions (mm)
4-29
5
4
Cable glands and accessories
Switching
Cable
glands
andand
field
accessories
devices
Selection chart
5-2
Barrier cable glands for armoured cables - PX2KW series 5-3
Barrier cable glands for non-armoured cables - PXSS2K series 5-4
Cable glands for armoured cables - REVD series 5-5
Cable glands for un-armoured cables - REV series
5-6
Reducers and adaptors - RE series
5-7
Plugs - PLG series
5-8
Locknuts, serrated washers and earth tags 5-9
CABLE GLAND
ACCESSORIES
CABLE GLANDS FOR
ARMOURED CABLES
CABLE GLANDS FOR
NON-ARMOURED CABLES
ADAPTORS AND REDUCERS
5
Cable glands
Selection chart
Cable glands and accessories
Protection
Description
Technique
Barrier (resin fill) Armoured Cable Gland
PX2KW
- Armoured (SWA) Cables Ex d, Ex e, Ex nR, Ex tD
- Barrier (Resin fill) type
cable gland
- Triple certified
- Nickel plated brass
Barrier (resin fill) Non-Armoured Cable Gland
PXSS2K
- Non Armoured Cables Ex d, Ex e, Ex nR, Ex tD
- Barrier (Resin fill) type
cable gland
- Triple certified
- Nickel plated brass
Armoured Cable Gland
REVD Series
- Armoured (SWA) Cables Ex d, Ex e, Ex tD
- IP 66/68
- Nickel plated brass
Zone 1
Zone 2
Zone 21
Zone 22
Group
3
3
3
3
I/II
3
3
3
3
I/II
3
3
3
3
II
3
3
3
3
II
3
3
3
3
II
3
3
3
3
II
Non-Armoured Cable Gland
REV Series
- Non Armoured Cables
- IP 66/68
- Nickel plated brass
Ex d, Ex e, Ex tD
Reducers and Adaptors
RE Series
- IP 66/67
Ex d, Ex e, Ex tD
- Nickel plated brass
Plugs
PLG Series
- IP 66/67
- Nickel plated brass
5-2
Ex d, Ex e, Ex tD
Barrier cable glands for armoured cables
PX2KW series
Cable glands and accessories
Zones 1, 2 & 21, 22
IECEx SIR 06.0044X
Ex d IIC/Ex e II /Ex nR II or Ex d IIC, Ex e II or
Ex tD A21 IP 66
Ex d I/Ex e I or Ex d I or Ex e I
Features:
•
•
•
•
•
Suitable for Steel Wire Armour (SWA) cables
Barrier (Resin fill) type cable gland
Triple certified Ex d, Ex e, Ex nR
Nickel plated brass construction
Stainless steel version available upon request
Male
thread
Metric
B
Across
Min
Cable
Overall
cable
corners“C”
Protrusion Weight
gland Thread
Max
length “D” (Kgs) Cat. No.
size length “A” Min Max
M20
20S
15
9.5
15.9
33.6
58.5
0.163
PX2KW20S16
M20
20
15
12.5
20.9
33.6
60.5
0.217
PX2KW20S
M20
20
15
14
22
41.3
67.5
0.345
PX2KW20
M25
25
15
18.2
26.2
41.3
67.5
0.345
PX2KW25
M32
32
15
23.7
33.9
50.6
69.5
0.484
PX2KW32
M40
40
15
27.9
40.4
60.5
78
0.7
PX2KW40
M50
50S
15
35.2
46.7
66
75.5
0.8
PX2KW50S
M50
50
15
40.4
53.1
77
80.5
0.83
PX2KW50
M63
63S
15
45.6
59.4
82.5
91.5
1.415
PX2KW63S
M63
63
15
54.6
65.9
88
92
1.514
PX2KW63
M75
75S
15
59
72.1
97.9
99
2.199
PX2KW75S
M75
75
15
66.7
78.5
108.9
102
2.77
PX2KW75
Note:
5
Dimensions are displayed in millimeters unless otherwise stated
5-3
5
Barrier cable glands for non-armoured cables
PXSS2K series
Cable glands and accessories
Zones 1, 2 & 21, 22
IECEx SIR 06.0044X
Ex d IIC/Ex e II /Ex nR II or Ex d IIC, Ex e II or
Ex tD A21
IP 66
Ex d I/Ex e I or Ex d I or Ex e I
Features:
PXSS2K
•
•
•
•
•
Suitable for un-armoured cables
Barrier (resin fill) type cable gland
Triple certified Ex d, Ex e, Ex nR
Nickel plated brass construction
Stainless steel version available upon request
Male
thread
Metric
M20
M20
20
15
6.1
11.7
32.9
58.5
0.200
PXSS2K20S
M20
20
15
6.5
14.0
32.9
60.5
0.250
PXSS2K20
M25
25
15
11.1
20.0
40.5
67.5
0.403
PXSS2K25
M32
32
15
17.0
26.3
49.6
69.5
0.555
PXSS2K32
M40
40
15
22.0
32.1
59.4
78.0
0.600
PXSS2K40
M50
50S
15
29.5
38.2
64.8
75.5
0.605
PXSS2K50S
M50
50
15
35.6
44.1
75.6
80.5
0.620
PXSS2K50
M63
63S
15
40.1
50.1
81.0
91.5
0.705
PXSS2K63S
M63
63
15
47.2
56.0
86.4
92.0
0.730
PXSS2K63
M75
75S
15
52.8
62.0
94.3
99.0
1.150
PXSS2K75S
M75
75
15
59.1
68.0
106.9
102.0
1.150
PXSS2K75
Note:
5-4
B
Across
Min
Cable
Overall
cable
corners“C”
Protrusion Weight
gland Thread
Max
length “D” (Kgs) Cat. No.
size length “A” Min Max
20S
15
3.1
8.7
32.9
58.5
0.200 PXSS2K20S16
Dimensions are displayed in millimeters unless otherwise stated
5
Cable glands for armored cables
REVD series
Cable glands and accessories
Zone 1,2 & 21,22
IECEx CES 13.0005X
Ex d IIC/Ex e IIC Gb
Ex tb IIIC IP66/67
Features:
REVD
•
•
•
•
•
Suitable for armored cables
Comes with o-ring for IP protection
Triple certified, Ex d, Ex e and Ex tb
Nickel plated brass construction
Stainless steel and galvanised steel available upon request
Cable range (mm)
Dimensions (mm)
Male
thread
Metric
AC
M16
24
M20
M25
ØM
C
d min-max
D min-max
Internal
sheath
Outer
sheath
of the cable
Cat. No.
5-10
8-15
REVD01IB
47
7-12
11-16
REVD1IB
48.5
12-18
16-24
REVD2IB
28
44
24
28
32
37
M32
40
47
59.5
18-24
24-31
REVD3IB
M40
48
56
60
24-30
31-37
REVD4IB
M50
53
62
64
30-5
37-43
REVD5IB
M63
63/65
73
64
35-45
43-53
REVD6IB
Note:
Stainless Steel and female thread available, contact NHP for details.
5-5
5
Cable glands for un-armored cables
REV series
Cable glands and accessories
Zone 1,2 & 21,22
IECEx CES 13.0005X
Ex d IIC/Ex e IIC Gb
Ex tb IIIC IP66/67
Features:
REV
•
•
•
•
•
Suitable for non-armored cables
Comes with o-ring for IP protection
Triple certified, Ex d, Ex e and Ex tb
Nickel plated brass construction
Stainless steel and galvanised steel available upon request
Dimensions (mm)
Male
thread
Metric
ØM
C
Cat. No.
M16
24
28
44
5-10
REV01IB
M20
24
28
47
7-12
REV1IB
M25
32
37
48.5
12-18
REV2IB
M32
40
47
59.5
18-24
REV3IB
M40
48
56
60
24-30
REV4IB
M50
53
62
64
30-35
REV5IB
M63
63/65
73
64
35-45
REV6IB
Note:
5-6
AC
Cable range
(mm)
d min-max
Stainless steel and female thread available, contact NHP for details.
5
Reducers and adaptors
RE series
IECEx CES 10.0001X issue 0
Ex d IIC
Ex e II
Ex tD A21 IP 66/67
Adaptors
REG
Thread size
Metric (ISO)
M20
Metric (ISO)
M16
Cat. No.
REGIF20IM16B
M25
M20
REGIF25IM20B
M32
M20
REGIF32IM20B
M32
M25
REGIF32IM25B
M40
M25
REGIF40IM25B
M40
M32
REGIF40IM32B
M50
M25
REGIF50IM25B
M50
M32
REGIF50IM32B
M50
M40
REGIF50IM40B
M63
M32
REGIF63IM32B
M63
M40
REGIF63IM40B
M63
M50
REGIF63IM50B
ISO 7/1
1/2"
Metric (ISO)
M16
Cat. No.
REGM1IF16B
1/2"
M20
REBIF20GM1B
3/4"
M20
REGM2IF20B
3/4"
M25
REBIF25GM2B
1"
M20
REGM3IF20B
1"
M25
REGM3IF25B
1"
M32
REBIF32GM3B
1 1/2"
M20
REGM5IF20B
1 1/2"
M25
REGM5IF25B
1 1/2"
M32
REGM5IF32B
Cable glands and accessories
Zone 1, 2 & 21, 22
Reducers
Thread size
REB
Note: All adaptors and reducers are Nickel plated brass.
Other materials available upon request; Stainless steel and galvanised steel.
More sizes available upon request.
5-7
5
Plugs
PLG series
Cable glands and accessories
Zone 1, 2 & 21, 22
IECEx CES 10.0001X issue 0
Ex d IIC
Ex e II
Ex tD A21 IP 66/67
Nickel plated brass
Metric ISO
Metric
Thread Size
M16
M20
Cat. No.
PLG01IB
PLG1IB
M25
PLG2IB
M32
PLG3IB
M40
PLG4IB
M50
PLG5IB
Conical ISO 7/1
Conical
5-8
Thread Size
3/8”
½”
Cat. No.
PLG01B
PLG1B
¾”
PLG2B
1”
PLG3B
1 ¼”
PLG4B
1 ½”
PLG5IB
5
Locknuts, serrated washers and earth tags
SR-Z Series serrated washers can be used in conjunction with a locknut to provide
additional fixing security.
EP-Z Series Earth tags are used to provide an earth-bond connection for an entry component.
Technical data:
LN-Z Series
Threadforms:
Metric
Materials:
Brass, 316 stainless steel
Plating:
Nickel
Catalogue Number construction:
LN
SR-Z Stainless Steel Series
1
1
00
Product
LN - Locknut
SR - Serrated washers
EP - Earth tags
03
Male, Female Thread
03 - 14 — Metric
Plating
0 - Unplated
Material
1 - Nickel
1 - Brass
3 - Stainless Steel
Certification
Z - Industrial
Locknuts
EP-Z Series
Z
Serrated washers
Earth tags
Metric
Cat. No. 1)
Metric
Cat. No. 1)
Metric
Thickness (mm)
Cat. No. 1)
M16
LNZ110003
M16
SRZ300003
M16
1.4
EPZ110003
M20
LNZ110004
M20
SRZ300004
M20
1.4
EPZ110004
M25
LNZ110005
M25
SRZ300005
M25
1.4
EPZ110005
M32
LNZ110006
M32
SRZ300006
M32
1.4
EPZ110006
M40
LNZ110007
M40
SRZ300007
M40
1.4
EPZ110007
M50
LNZ110008
M50
SRZ300008
M50
1.4
EPZ110008
M63
LNZ110009
M63
SRZ300009
M63
1.4
LNZ110009
M75
LNZ110010
M75
SRZ300010
M75
1.4
EPZ110010
M80 x 2.0
LNZ110011
M80
2.0
EPZ110011
M85 x 2.0
LNZ110012
M85
2.0
EPZ110012
M90 x 2.0
LNZ110013
M90
2.0
EPZ110013
M100 x 2.0
LNZ110014
M100
2.0
EPZ110014
Note:
Cable glands and accessories
LN-Z Series locknuts provide a method of securing a threaded entry component into a
piece of equipment.
) Stocked locknuts, serrated washers and earth tags are metric, nickel brass.
1
5-9
6
Terminals
Terminals
TOPJOB®S Ex e terminals with CAGE CLAMP®S
Introduction
6-2
Terminals selection chart 6-3
TOPJOB®S terminals - 2.5 mm 6-4
TOPJOB®S terminals - 4 mm
6-5
2
2
TOPJOB®S terminals - 6 mm 6-6
2
TOPJOB®S terminals - 10 mm
6-7
TOPJOB®S terminals - 16 mm2 6-8
TOPJOB®S accessories
6-9
2
4MM2 TERMINALS
TERMINAL ACCESSORIES
16MM2 TERMINALS
6
TOPJOB®S Exe terminals with CAGE CLAMP®S
Introduction
Terminals
Fast and maintenance free push-in connection
TOPJOB®S - the smart feature: conductors fitted with ferrules or solid conductors can be connected
simply by pushing them in - without using a screwdriver! (0.5 mm2 - 16 mm2)
Solid conductors or conductors fitted
with ferrules can simply be pushed
in - without using a screwdriver.
Unprepared flexible conductors
are terminated using a standard
screwdriver.
Jumper contacts can be
removed to make alternate
or staggered jumpers
(up to 4 mm2).
Double socket acomodates
comb type jumper bars,
testing adaptors or test plug
modules.
6-2
CERTIFIED TO
IEC 60079.7
TOPJOB®S Exe terminals with CAGE CLAMP®S
Terminals selection chart
TOPJOBS®S Terminals Series 2002 -2.5 mm2
Conductor size:
0.25 - 2.5 mm2
Conductor entry:
Front
Rating (Ex ell):
550 V, 22 A
Stripping length
10 - 12 mm
Marking:
Side/centre
Terminal width
5.2 mm
Terminals
Description
6
TOPJOBS®S Terminals Series 2004 -4 mm2
Conductor size:
0.5 - 4 mm2
Conductor entry:
Front
Rating (Ex ell):
550 V, 30 A
Stripping length
10 - 13 mm
Marking:
Side/centre
Terminal width
6.2 mm
TOPJOBS®S Terminals Series 2006 -6 mm2
Conductor size:
0.5 - 6 mm2
Conductor entry:
Front
Rating (Ex ell):
550 V, 38 A
Stripping length
13 - 15 mm
Marking:
Side/centre
Terminal width
5.2 mm
TOPJOBS®S Terminals Series 2010 -10 mm2
Conductor size:
0.5 - 10 mm2
Conductor entry:
Front
Rating (Ex ell):
550 V, 51 A
Stripping length
10 - 19 mm
Marking:
Side/centre
Terminal width
5.2 mm
TOPJOBS®S Terminals Series 2016 -16 mm2
Conductor size:
0.5 - 16 mm2
Conductor entry:
Front
Rating (Ex ell):
550 V, 70 A
Stripping length
18 - 20 mm
Marking:
Side/centre
Terminal width
12 mm
Accessories
Test plug adaptor
Testing tap
Operating instructions
Insulated ferrules
Screwless end stop
Marking systems
6-3
6
TOPJOB®S terminals
2.5 mm2
Series 2002
Colours:
Conductor size:
0.25 - 2.5 mm2
Conductor entry:Front
Rating (Ex ell):
550 V, 22 A
Stripping length:
10 - 12 mm
Marking: Side/centre
Terminal width:
5.2 mm
Grey
l
Blue
l
Orange
l
Earth terminal
ww
33 mm
33 mm
33 mm
Terminals
Through terminals – DIN 35 mounting
48.5 mm
59.5 mm
2 - Conductor
Colour
Cat. No.
l
2002-1201
l
2002-1204
l
2002-1202
Earth terminal
2002-1207
ww
End / intermediate plate
(orange)
Cat. No.
2002-1292
70 mm
3 - Conductor
Colour
Cat. No.
l
2002-1301
l
2002-1304
l
2002-1302
Earth terminal
2002-1307
ww
End / intermediate plate
(orange)
End / intermediate plate
(orange)
Cat. No.
2002-1392
Cat. No.
2002-1492
Accessories, Series 2002
Push-in jumper bars
- (IN 20 A)
Connections
2-way
3-way
4-way
5-way
10-way
6-4
Cat. No.
2002-402
2002-403
2002-404
2002-405
2002-410
Push-in jumper bars
- (IN 20 A)
Connections
1 to 3
1 to 4
1 to 5
1 to 10
Cat. No.
2002-433
2002-434
2002-435
2002-440
Screwless ”Snap on”
end stop
Connections
6 mm wide
Cat. No.
249-116
6
TOPJOB®S terminals
4 mm2
Terminals
Through terminals – DIN 35 mounting
Series 2004
Conductor size:
Colours:
0.5 - 4 mm2
Conductor entry:Front
Rating (Ex ell):
550 V, 30 A
Stripping length:
10 - 13 mm
Grey
l
Blue
l
Orange
l
Earth terminal
ww
Marking: Side/centre
33 mm
52.5 mm
79 mm
65.5 mm
2 - Conductor
Colour
Cat. No.
l
2004-1201
l
2004-1204
l
2004-1202
Earth terminal
2004-1207
ww
33 mm
6.2 mm
33 mm
Terminal width:
3 - Conductor
Colour
Cat. No.
l
2004-1301
l
2004-1304
l
2004-1302
Earth terminal
2004-1307
ww
4 - Conductor
Colour
Cat. No.
l
2004-1401
l
2004-1404
l
2004-1402
Earth terminal
2004-1407
ww
End / intermediate plate
(orange)
End / intermediate plate
(orange)
End / intermediate plate
(orange)
Cat. No.
2004-1292
Cat. No.
2004-1392
Cat. No.
2004-1492
Accessories, Series 2004
Push-in jumper bars (IN 30 A)
Connections
2-way
3-way
4-way
5-way
10-way
Cat. No.
2004-402
2004-403
2004-404
2004-405
2004-410
Push-in jumper bars (IN 30 A)
Connections
1 to 3
1 to 4
1 to 5
1 to 10
Cat. No.
2004-433
2004-434
2004-435
2004-440
Screwless ”Snap on”
end stop
Connections
6 mm wide
Cat. No.
249-116
6-5
6
TOPJOB®S terminals
6 mm2
Terminals
Through terminals – DIN 35 mounting
Series 2006
Conductor size:
Colours:
0.5 - 6 mm2
Grey
l
Conductor entry:Front
Blue
l
Rating (Ex ell):
550 V, 38 A
Orange
l
Stripping length:
13 - 15 mm L
Earth terminal
ww
Marking: Side/centre
33 mm
7.5 mm
33 mm
Terminal width:
56.5 mm
72.5 mm
2 - Conductor
Colour
Cat. No.
l
2006-1201
l
2006-1204
l
2006-1202
Earth terminal
3 - Conductor
Colour
Cat. No.
l
2006-1301
l
2006-1304
l
2006-1302
Earth terminal
2006-1207
ww
ww
2006-1307
End / intermediate plate
(orange)
End / intermediate plate
(orange)
Cat. No.
2006-1292
Cat. No.
2006-1392
Accessories, Series 2006
Push-in jumper bars (IN 33 A)
Connections
2-way
3-way
4-way
5-way
6-6
Cat. No.
2006-402
2006-403
2006-404
2006-405
Push-in jumper bars
- (IN 33 A)
Connections
1 to 3
1 to 4
1 to 5
Cat. No.
2004-433
2004-434
2004-435
Screwless ”Snap on”
end stop
Connections
6 mm wide
Cat. No.
249-117
6
TOPJOB®S terminals
10 mm2
Terminals
Through terminals – DIN 35 mounting
SERIES 2010
Conductor size:
0.5 - 10 mm2
Colours:
Grey
l
Conductor entry:Front
Blue
l
Rating (Ex ell):
550 V, 51 A
Orange
l
Stripping length:
17 - 19 mm
Earth terminal
ww
Marking: Side/centre
37 mm
10 mm
37 mm
Terminal width:
65 mm
85.5 mm
2 - Conductor
Colour
Cat. No.
l
2010-1201
l
2010-1204
l
2010-1202
Earth terminal
3 - Conductor
Colour
Cat. No.
l
2010-1301
l
2010-1304
l
2010-1302
Earth terminal
2010-1207
ww
ww
2010-1307
End / intermediate plate
(orange)
End / intermediate plate
(orange)
Cat. No.
2010-1292
Cat. No.
2010-1392
Accessories, Series 2010
Push-in jumper bars (IN 51 A)
Connections
2-way
3-way
4-way
5-way
Cat. No.
2010-402
2010-403
2010-404
2010-405
Push-in jumper bars (IN 51 A)
Connections
1 to 3
1 to 4
1 to 5
Cat. No.
2010-433
2010-434
2010-435
Screwless ”Snap on”
end stop
Connections
6 mm wide
Cat. No.
249-117
6-7
TOPJOB®S terminals
16 mm2
Through terminals – DIN 35 mounting
Conductor size:
0.5 - 16 mm2
Conductor entry:Front
Rating (Ex ell):
550 V, 70 A
Stripping length:
18 - 20 mm
Marking: Side/centre
Terminal width:
12 mm
Colours:
Grey
l
Blue
l
Orange
l
Earth terminal
ww
37 mm
Terminals
SERIES 2016
37 mm
6
95 mm
73 mm
2 - Conductor
Colour
Cat. No.
l
2016-1201
l
2016-1204
l
2016-1202
Earth terminal
ww
3 - Conductor
Colour
Cat. No.
l
2016-1301
l
2016-1304
l
2016-1302
Earth terminal
2016-1207
ww
2016-1307
End / intermediate plate
(orange)
End / intermediate plate
(orange)
Cat. No.
2010-1692
Cat. No.
2016-1392
Accessories, Series 2016
Push-in jumper bars (IN 65 A)
Connections
2-way
3-way
4-way
5-way
6-8
Cat. No.
2016-402
2016-403
2016-404
2016-405
Push-in jumper bars (IN 65 A)
Connections
1 to 3
1 to 4
1 to 5
Cat. No.
2016-433
2016-434
2016-435
Screwless ”Snap on”
end stop
Connections
6 mm wide
Cat. No.
249-117
6
TOPJOB®S accessories
Terminals
Test plug adaptor - suits 4 mm test plugs
for testing TOPJOB®S terminal blocks
Cat. No.
2009 - 174
Testing tap - suits wires 0.08 mm2 - 2.5 mm2
for connecting individual test wires without tools
Cat. No.
2009 - 182
Operating instructions self-adhesive
- suits all TOPJOBS®S terminals
Cat. No.
210-400/2000-0801
Insulated ferrules for TOPJOB®S TERMINALS
Dimensions Suitable Sleeve
(mm)
for series for mm2
D2
Stripped
length
L
Colour (mm)
D1 D2 Cat. No.
1.5
black
12
16
10
4.0
3.5
1.7
216-244
2002-2006
2.5
blue
14
19
12
4.7
4.2
2.2
216-266
2004-2006
4.0
grey
14
20
12
5.4
4.8
2.8
216-267
2010-2016
6.0
yellow
20
26
18
6.9
6.3
3.5
216-288
2010-2016
10.0
red
20
28
18
8.4
7.6
4.5
216-289
2016
16.0
blue
23
28
18
9.6
8.8
5.8
216-210
L1
L1 D
2001-2002
L
D1
D
Insulated ferrules electrolytic copper, electro-tin plated, acc. to DIN 46228, part 4/09.90
Screwless “Snap on” end stop
Connections
Cat. No.
6 mm wide
249-116
10 mm wide
249-117
6-9
6
TOPJOB®S accessories
Terminals
Marking systems
Horizontal marking 10 strips with 10 markers per card
Marking per card
Cat. No.
Marking per card
Cat. No.
1....10(10x)
793-5502
1....50(2x)
793-5566
11....20(10x)
793-5503
51....100(2x)
793-5507
21....30(10x)
793-5504
101....150(2x)
793-5508
31....40(10x)
793-5505
151....200(2x)
793-5509
41....50(10x)
793-5506
blank-self marking
793-5501
Vertical marking 10 strips with 10 markers per card
➊
➋
π➍
6-10
➌
Marking per card
Cat. No.
Marking per card
Cat. No.
1....10(10x)
793-5602
1....50(2x)
793-5666
11....20(10x)
793-5603
51....100(2x)
793-5607
21....30(10x)
793-5604
101....150(2x)
793-5608
31....40(10x)
793-5605
151....200(2x)
793-5609
41....50(10x)
793-5606
blank-self marking
793-5501
Marking accessories
Group marking
❶
❷
➌
➍
Cat. No.
Group marker carrier for direct fitting onto 249-116 and 249-117
209-112
Marker cards (100 markers per sheet) perforated sheet
209-114
Protection cover (transparent)
209-113
Adjustable height group marker carrier for 249-116 and 249-117
249-119
Quality service you can trust.
At NHP we’re solely
committed to serving the
needs of our customers to
ensure you get the best
result for your project.
How? Put simply, we’re
easy to do business with.
From technical maintenance
through to general enquiries,
NHP provide around-theclock customer support that
is committed to servicing
your needs. Our expert team
of technically trained support
staff has the knowledge to
provide quality and reliable
advice whether you are
placing an order or seeking
product assistance.
With the largest product
management, technical and
engineering support and
sales team in the Australasian
electrical industry, NHP have
the agility to provide accurate
product and application
solutions and after-sale service
relative to the local market.
NHP ELECTRICAL ENGINEERING PRODUCTS PTY LTD
EASY TO DO BUSINESS WITH
Sales 1300 NHP NHP | nhp.com.au |
7
Intrinsic safety equipment
Intrinsic safety equipment
Wago I/O systems - 750 series 7-2
Intrinsically safe galvanic isolators
Introduction
Selection chart
7-3
7-4
INTRINSICALLY SAFE
GALVANIC ISOLATORS
INTRINSICALLY SAFE
GALVANIC ISOLATORS
7
WAGO I/O system – 750 series
Intrinsic safety equipment
Intrinsically Safe System for applications WAGO-I/O-SYSTEM
750 - Now IECex approved, test certificates available in
Hazardous Areas
Intrinsically safe system for applications in Hazardous Areas
Today’s development shows that many chemical and petrochemical companies have production plants,
production and process automation machines in operation, which use gas-air or dust-air mixtures which
can be explosive. For this reason, the electrical components used in such plants and systems must not
pose a risk of explosion resulting in injury to persons or damage to property.
The WAGO-I/O-SYSTEM 750 is designed for use in both hazardous and non-hazardous environments.
Using fieldbus technology in hazardous environments can be very time consuming and cost intensive
and is only made possible in a limited way. When used in hazardous areas of Zone 2, the WAGO-I/OSYSTEM 750 offers a safe, easy an economical connection to the sensors and actuators of Zones 0 and 1.
The EExi I/O modules were specially developed for this purpose. They build up an intrinsically safe
section, which can be integrated into a standard fieldbus node, offering all the advantages of stateof-the-art fieldbus technology (e.g. fieldbus independency, flexibility, modularity, programmability,
reliability, cost effectiveness).
EExi Models 1)
Description
Cat. No.
Ethernet IP coupler
750-352
EE i Power supply
750-606
EExi 1 channel digital input
EExi 2 channel digital input
8 channel digital input
EExi 2 channel digital output
EExi 2 channel analogue input 4-20 mA
750-435
750-438
750-439
750-535
750-485
EExi 1 channel analogue input RTD
750-481
EExi 1 channel analogue input 0-20 mA
End Module
750-585
750-600
Notes: 7-2
1
) Please check availability.
Now IECex approved, test certificates available.
The WAGO I/O range is frequently increased, and extensive technical literature is available. Contact NHP.
Intrinsically safe galvanic isolators
DIN mountable / bus powered - D5000 series
High performance
• High signal transfer accuracy and repeatability
•Advanced circuitry provides low heat dissipation, ensuring modules run cool despite their high
functionality
• Complete absence of electrolytic capacitors ensures minimum 20 years lifetime
• SMD manufacturing for a long and reliable life
Wide functionality
D5000
• Wide range of digital and analogue I/Os
• SIL 3 Safety Relay contacts rated for 4 A or 10 A for direct switching of high loads
•Three port galvanic isolation to eliminate noise, ground loop problems and to provide intrinsic safety
without a high integrity safety earth connection
• Line fault alarm detects open or short circuit of field cables
• Optional power bus DIN-Rail connector
• Standard Termination Board with custom connectors for integration into customised boards
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system
General features
•
•
•
•
•
•
•
•
•
•
•
Intrinsic safety equipment
Features:
7
More than 25 modules suitable for SIL 3 applications according to IEC 61508, IEC 61511
Independent power supply circuit for each channel
Dual channel units are equivalent to two single units because of the absence of common circuitry
Single channel versions available when required, to provide single loop integrity
Configuration components are easily accessed by removing the side cover
DIP switch configurability for easy field setup
LED indication for power, signal status and line fault conditions
Modules accept DC power supply over a wide range for 24 V DC (20-30 V DC) applications
Wide operating temp. range: -40 to +60/+70°C.
Installation in Zone 2 / Division 2
Certified for offshore and marine applications
High packing density
•
•
•
•
35 mm (Top Hat) DIN-Rail
Ultra slim 2 channels 12 mm wide DIN-Rail and termination board mounting modules
Power and fault on bus connectors
6 mm per channel means 50% space reduction
Blue terminal blocks for Hazardous Area connections
Grey terminal blocks for Safe
Area Connections
Detachable cover for access to
configuration component
7-3
7
Intrinsically safe galvanic isolators
Intrinsic safety equipment
Technical data:
Function
Ch.
per
unit
1
Analogue
input
2
4
1
D1000
Analogue
output
2
Zone 0, 1, 2, & 20, 21, 22
Ex nA [Ex ia Ga] IIC T4
[Ex ia Da] IIIC
[Ex ia Ma] I
IECEx BVS 07.0027X
Temperature 1
converters
and trip
amplifiers
2
Hazardous Area
0/4-20mA,
2/3 wire
active or passive Tx
Safe Area
0/4-20 mA, mV
or repeated outputs
0/4-20 mA, mV
or repeated outputs
20-30 V DC
SIL
Cat. No.
3
D5014S
3
D5014D
3
D5212Q*
4-20mA,
2 wire passive Tx
4-20mA or
repeated outputs
4-20mA analogue
signal to I/P
converters,
electrovalves,
actuators and
displays; smart
compatible
4-20 mA
bus powered
signal from DCS, PLC or
other control devices.
Two duplicated outputs
20-30 V DC
3
D5020S
20-30 V DC
3
D5020D
2-3-4 wire RTD/
resistance
potentiometer
2-3-4 wires resistance
20-30 V DC
2
D5072-087
Universal TC,
3-wires RTD,
potentiometer, mV
4-20 mA (source or sink)
+ Modbus,
duplicator
20-30 V DC
2
D5072D*
Load Cell
1
Up to 4, 350 Ω,
6-wires load cells
in parallel.
Transparent input
repeater
20-30 V DC
1
D1063S*
Signal
converter
1
0-50 KHz
magnetic pickup or
proximity switch
mA (source) or V Out,
pulse repeater output
+ Modbus
20-30 V DC
2
D5060S*
Notes: * Configurable via PCC5092 with software SWC5090
** Configurable via PCC1092 with software SWC1090
7-4
Supply
7
Intrinsically safe galvanic isolators
Technical data:
Zone 0-1-2-20-21-22
Ex xA [ia Ga} IIC T4 Gc
[Ex ia Da] IIIC
[Ex ia Ma] I
IECEx BVS 10.0072 X
SIL
Cat. No.
3
D5030S
2 SPST (relay contact)
SPST (alarm or duplicator)
LED (fault status)
20-30 V DC
3
D5030D
8 open collectors
+ LED (fault status)
+ Modbus
20-30 V DC
2
D5231E*
2 SPDT (relay contact)
+ LED (fault status)
20-30 V DC
-
D1030D
2
2 SPST (relay contact)
SPST (alarm or duplicator)
LED (fault status)
85-264 V AC
100-350 V DC
3
D1130D
1
Control signal from PLC,
DCS
20-30 V DC
3
D5049S
Voltage free contact,
logic level,
other control devices
20-30 V DC
-
D1042Q
20-30 V DC
-
D1043Q
Voltage free
contact,
proximity switch,
line fault detection,
isolated inputs
8
2
Digital
output
driver
Supply
20-30 V DC
2
D5000
Safe Area
1 SPDT (relay contact)
+ LED (fault status)
1
Digital
input
Hazardous Area
4
Voltage free
contact,
proximity switch
line fault detection
Electrovalve,
beacons, sounder,
or other devices
4
Serial
1
converter
RS-485, RS-422
up to 1.5 Mbit/s
RS-485, RS-422, RS-232
20-30 V DC
1
D1061S
Encoder
Intrinsically safe
encoder
Transparent repeater
20-30 V DC
-
D5265S
1
Series
Description
Cat. No.
D5000
22 mm power bus connector for DIN rail mounting
JDFT050
D5000
Kit for bus mounting
OPT5096
D5000
PC adapter to configure programmable units;
includes SWC1090” software
PPC5092
-
Cold junction compensator to be ordered for THCs inputs
OPT1091
D1000
"PC adapter to configure programmable units; Include,
USB adapter and SWC1090” software
PPC1092
Accessories
Intrinsic safety equipment
Function
Ch.
per
unit
7-5
8
Ex Signalling
Ex Signalling
Beacons
Electronic sounders
Status light and sounder combination units
Manual call point
8-2
8-3
8-4
8-5
ELECTRONIC SOUNDER
XENON BEACON
MANUAL CALL POINT
8
Beacons
Zones 1, 2 & 21, 22
Ex Signalling
IECEx NEM 13.0030X
Ex d IIC T4/T5/T6
Ex tb IIIC T85°C/T100°C/T135°C
Ambient temperature:
- 40º C + 70º C
Features:
BC150
Dimensions (mm)
•
•
•
•
•
•
•
•
•
•
•
•
•
Xenon strobe 5, 10 or 20 joule selectable power
LED version with 5 W or 10 W power static, rotating or flashing
360 degree output on vertical axis
Multiple flash rate
Indoor or outdoor applications
Suitable for on-shore and off-shore applications
GRP or stainless steel construction
AC or DC voltage
Includes duty label
Stainless steel lens guard (optional)
Weight 3.8 kg
Phone initiation function available
IP 66
Body
Material
Beacon
type
Signal
power
Lens colour
Voltage
Cat No.
GRP
Xenon
20 joule
Amber
100-240 V AC
BC150AX20ACNNNARDN
GRP
Xenon
20 joule
Amber
12-48 V DC
BC150AX20DCNNNARDN
GRP
Xenon
20 joule
Red
100-240 V AC
BC150RX20ACNNNARDN
GRP
Xenon
20 joule
Red
12-48 V DC
BC150RX20DCNNNARDN
GRP
Xenon
20 joule
Blue
100-240 V AC
BC150BX20ACNNNARDN
GRP
Xenon
20 joule
Blue
12-48 V DC
BC150BX20DCNNNARDN
GRP
LED
10 W
Clear (4 colour 100-240 V AC
selectable)
BC150CL10ACNNNARDN
GRP
LED
10 W
Clear (4 colour 12-48 V DC
selectable)
BC150CL10DCNNNARDN
Stainless steel Xenon
20 joule
Amber
100-240 V AC
BC125AX20ACNNNARDN
Stainless steel Xenon
20 joule
Blue
12-48 V DC
BC125BX20DCNNNARDN
Stainless steel Xenon
20 joule
Red
12-48 V DC
BC125RX20DCNNNARDN
Xenon
20 joule
Amber
100 - 240 V AC BC150YX20ACYNNAR
20 joule
Accessories:
Description
"Ex Barrier gland SWA cable
Thread Type Cable O.D
(length)
min/max (mm) Material
Cat No.
M20 (25mm) 14.5 - 20.5
Nickel plated brass 50202
“Ex Barrier gland unarmored cable M20 (25mm) 9-15
“Ex Barrier gland SWA cable”
M20 (25mm) 14.5-20.5
Nickel plated brass 50203
Stainless steel
50212
“Ex Barrier gland unarmored cable M20 (25mm) 9-15
Stainless steel
50213
Lens guard
-
-
Stainless steel
MO50023
Earth tag
Ex d plug
Ex d plug
M20
M20
M20
-
Nickel plated brass EPZ110004
Nickel plated brass PLG1IB
Stainless steel
PLG1IS
Notes: More variations available, contact NHP for a quote today.
8-2
8
Electronic sounder
Sounder / beacon combo
Ex Signalling
Zones 1, 2 & 21, 22
IECEx NEM 13.0032X (sounder)
IECEx NEM 13.0036X (sounder / beacon)
Ex d IIC T4/T5/T6
Ex tb IIIC T85°C/T100°C/T135°C
SD150
Ambient temperature:
- 40º C + 70º C
Features:
SB150
Dimensions (mm)
• IP 66 protection
• 3 stage alarm
• Max. current draw 1.5 amps
• 63 selectable tones
•Sound output , 115 dB @ 1 metre
• Indoor or outdoor applications
• GRP or stainless steel construction
•316 grade stainless steel mounting bracket
• AC or DC voltage
• Includes duty label
• Weight 5.4 kg
Body
Material
Body
Colour
Function Beacon
Lens
Colour
Voltage
Cat. No.
GRP
Red
Sounder
-
-
12-48 V DC
SD1501DCNNARD
GRP
Red
Sounder
-
-
100-240 V AC
SD1501ACNNARD
Stainless
Steel
Red
Sounder
-
-
100-240 V AC SD1251ACNNARD
Stainless
Steel
Red
Sounder
-
-
12-48 V DC
SD1251DCNNARD
GRP
Red
Sounder
/ Beacon
Xenon 20J Red
100-240 V AC
SB1501RX20ACNNNARDN
GRP
Red
Sounder
/ Beacon
Xenon 20J Red
12-48 V DC
SB1501RX20DCNNNARDN
Accessories:
Description
Thread Type Cable O.D
(length)
min/max (mm) Material
"Ex Barrier gland SWA cable
M20 (25 mm) 14.5 - 20.5
“Ex Barrier gland Unarmored cable M20 (25 mm) 9-15
Cat No.
Nickel plated brass 50202
Nickel plated brass 50203
“Ex Barrier gland SWA cable”
M20 (25 mm) 14.5-20.5
Stainless steel
50212
“Ex Barrier gland unarmored cable
M20 (25 mm) 9-15
Stainless steel
50213
Earth tag
M20
-
Nickel plated brass EPZ110004
Ex d plug
M20
-
Nickel plated brass PLG1IB
Ex d plug
M20
-
Stainless steel
PLG1IS
Notes: More variations available, contact NHP for a quote today.
8-3
8
Status lights and sounder combination units
Ex Signalling
Zones 1, 2 & 21, 22
IECEx NEM 13.0035X
IECEx NEM 13.0036X (sounder / beacon)
Ex d IIC T4/T5/T6
Ex tb IIIC T85°C/T100°C/T135°C
IP 66
Ambient temperature:
- 40º C + 70º C
Features:
Status lights and signalling units are built to order, in both GRP and Stainless steel.
Combinations of beacons for status lights are available in Xenon or LED technologies,
and various voltages.
Electronic sounders , pushbuttons and junction boxes can also be incorporated into
the design, including internal wiring to a junction box to save on installation time.
Please contact NHP for a quote today
8-4
Manual call point
IECEx NEM 13.0033X (CP150)
IECEx NEM 13.0038X (CP135)
Ex d IIC/IIB+H2 T6
Ex tb IIIC T85°C
IP 66
CP150
Ambient temperature:
- 40º C + 70º C
Ex Signalling
Zones 1, 2 & 21, 22
8
Features:
The CP135 and CP150 manual call point range has been approved for use in potentially explosive
atmospheres and harsh environmental conditions.
It is compatible for use with a PLC, DCS and ESD systems via 4-20 mA output. It is ideally suited for
use in fire alarm systems and an addressable option with diode fitted is available.
The range also offers an additional visual LED indication option; red, green (or both) can be fitted.
When fault or alarm status arises the green LED will be overridden by the red LED.
CP135
With 2 different body styles, multiple colours, lift flap, and break glass covers, addressable options,
4-20 mA and N/C / N/O contacts. NHP has a solution to suit your requirements.
Please contact NHP for a quote today
8-5
NHP Hazardous
Area Solutions
IECEx certified HAE workshop
in Melbourne.
Full range of IECEx certified
products.
Industrial leading turnaround
time on custom assemblies.
Certified HAE experts.
Training courses.
Scan the QR code
for more information
Ex
Darwin
Cairns
NHP Locations
Townsville
11
13
12
Rockhampton
14
15
Toowoomba
9
Perth
7
10
Adelaide
NHP Branch Offices
NHP Resident Sales Staff
19
6
22
Brisbane
16
21
23 20
Newcastle
Canberra
Sydney
Albury
Wollongong
18
2
8
4
1
Melbourne
Auckland
3
5
Hamilton
Laverton
Dandenong
New Plymouth
Launceston
17
24
Napier
Wellington
Hobart
Christchurch
Dunedin
Australian Branches
Australian Branches
Australian Regional Representation
Australian Regional Representation
Victoria
Victoria
Richmond
Laverton
Richmond
Dandenong
Laverton
Albury / Wodonga
Dandenong
Albury
/ Wodonga
Tasmania
Western Australia
1Ballarat
1 2Ballarat
Western
Perth Australia
Bendigo
2 3Bendigo
Perth
Geelong
Northern Territory 3 Geelong
4Shepparton
Darwin
4 5Shepparton
Northern Territory
Gippsland
5 6Gippsland
Darwin
Queensland
Mildura
Brisbane
6 7Mildura
Whyalla
Hobart
Townsville
7 8Whyalla
Queensland
Tasmania
Mt Gambier
Launceston
Rockhampton
8 9Mt
Gambier
Brisbane
Hobart
Kalgoorlie
New South Wales Townsville
Toowoomba
9 10
Kalgoorlie
Launceston
Bunbury
Sydney
Cairns
10 11
Bunbury
Rockhampton
Karratha
Newcastle
11 12
Karratha
Toowoomba
NewCanberra
South Wales
Port Hedland
South Australia
12
Port
Hedland
Cairns
Sydney
Adelaide
Wollongong
13 Mackay
Newcastle
South Australia
Canberra
Adelaide
Wollongong
New Zealand Branches
New Zealand Branches
North Island
South Island
Auckland
North
Island
Hamilton
Auckland
Napier
Napier
Wellington
Wellington
New Plymouth
New Plymouth
Hamilton
Christchurch
South
Island
Dunedin
Christchurch
Dunedin
13Mackay
14 14Gladstone
Gladstone
15 15Sunshine
Coast
Sunshine
Coast
16 16Gold
Coast
Gold
Coast
17 17Griffith
Griffith
18 18Wagga
Wagga
Wagga
Wagga
19 19Dubbo
Dubbo
20 20Gosford
Gosford
21 21Coffs
Harbour
Coffs
Harbour
22 22Tamworth
Tamworth
23 23Lithgow
Lithgow
New Zealand Regional Representation
New Zealand Regional Representation
24 Bay of Plenty
24 Bay of Plenty
For more information, scan to
download the NHP eCatalogues App
offering exclusive video content,
catalogues and literature!
AUSTRALIA
nhp.com.au
SALES 1300 NHP NHP
FAX 1300 NHP FAX
VICTORIA
Melbourne
43-67 River Street
Richmond
VIC 3121
Tel +61 3 9429 2999
Laverton
104-106
William Angliss Drive
Laverton North
VIC 3026
Tel +61 3 9368 2901
Albury / Wodonga
847 Ramsden Drive
Albury
NSW 2640
Tel +61 2 6049 0600
Fax +61 3 6025 0592
Dandenong
Unit 1/80 Monash Drive
Dandenong South
VIC 3175
Tel +61 3 8773 6400
Fax 1300 647 329
TASMANIA
Hobart
29B Lampton Ave
Derwent Park
TAS 7009
Tel +61 3 6228 9575
Fax +61 3 6228 9757
Launceston
Unit 3
13-17 Merino Street
Kings Meadows
TAS 7249
Tel +61 3 6345 2600
Fax +61 3 6344 6324
NEW SOUTH WALES
QUEENSLAND
Sydney
30-34 Day Street North
Silverwater
NSW 2128
Tel +61 2 9748 3444
Brisbane
16 Riverview Place
Murarrie
QLD 4172
Tel +61 7 3909 4999
Newcastle
575 Maitland Road
Mayfield West
NSW 2304
Tel +61 2 4960 2220
Fax +61 2 4960 2203
Townsville
5 Leyland Street
Garbutt
QLD 4814
Tel +61 7 4779 0700
Fax +61 7 4775 1457
Wollongong
Unit 3
1 Resolution Drive
Unanderra
NSW 2526
Tel 1300 647 647
Fax 1300 647 329
Rockhampton
1 Lawson Street
Parkhurst
QLD 4702
Tel +61 7 4927 2277
Fax +61 7 4922 2947
ACT
Canberra
Unit 1
187 Gladstone Street
Fyshwick
ACT 2609
Tel +61 2 6280 9888
Fax +61 2 6280 9588
WESTERN AUSTRALIA
Perth
38 Belmont Ave
Rivervale
WA 6103
Tel +61 8 9277 1777
NORTHERN TERRITORY
Darwin
3 Steele Street
Winnellie
NT 0820
Tel +61 8 8947 2666
Fax +61 8 8947 2049
NHP Electrical Engineering Products Pty Ltd
A.B.N. 84 004 304 812
HAEC 9/14 © Copyright NHP 2014
Toowoomba
Cnr Carroll Street and
Struan Court
QLD 4350
Tel +61 7 4634 4799
Fax +61 7 4633 1796
Cairns
Unit 2
1 Bramp Close
Portsmith
QLD 4870
Tel +61 7 4035 6888
Fax +61 7 4035 6999
SOUTH AUSTRALIA
Adelaide
36-38 Croydon Road
Keswick
SA 5035
Tel +61 8 8297 9055
NEW ZEALAND
nhp-nz.com
SALES 0800 NHP NHP
FAX 0800 FAX NHP
PO Box 62-009
Sylvia Park
Auckland 1644
New Zealand
Auckland
118a Carbine Road
Mt Wellington 1060
Hamilton
78 Rostrevor Street
Hamilton 3204
Napier
126 Taradale Road
Onekawa 4110
New Plymouth
2 Dean Place
Waiwhakaiho 4312
Wellington
Unit B4, 59 Marsden Street
Melling
Lower Hutt 5010
Christchurch
27 Iversen Terrace
Waltham 8011
Dunedin
30 Fox Street
South Dunedin 9012