lighting since 1895
Features and Options
Recessed Open Appearance
Lensed E-Lamp "Pulse Start"
Downlight: 50 to 150 Watt
Features
Lamp
• Designed for metal halide E-lamps. See chart
below for standard and optional wattages.
• See Option -43 and chart below for lower
wattage or HPS availability.
Socket
• Vertical. Pulse rated. Glazed porcelain.
• Nickel-plated brass screw shell. Silicone
leads.
Reflector
• Self-flanged clear specular Alzak® aluminum.
• Ten optional reflector finishes available.
Lens
• UV absorbing clear tempered glass mounted
to reflector. Also see Options.
Ballast Assembly: Specify Voltage
• WhisperPackTM fully encapsulated 180oC
rated HPF pulse start ballast.
HRR-06025
6" 150W
• 50-150 watt: Class H, high reactance for 120
volt and Options -65, -66; linear reactor for
277 volt.
• Capacitor and ignitor supplied.
• Dimming (-39) and electronic (-96) ballasts
available. See Options.
• Cool, quiet, long-life. Silicone leads.
• Visible and easily serviced in all ceilings
including dry wall.
Fuse
• Fused primary. Renewable. Not for 480 volt.
Housing
• Acrylic enameled aluminum.
• Cool: Dissipates heat across entire surface
area. Ventilated.
• Rustproof: Exceeds 1000 hour ASTM 5% salt
spray test.
• Entire luminaire serviced from below through
removable reflector and lens.
• Built-in plaster frame.
Outlet Box
• Prewired 14 GA (NEC) galvanized steel, UL
listed; with removable insulated cover.
• 1/2" and 3/4" knockouts.
Installation
• 27" galvanized hanger bars supplied (2).
• Fully adjustable universal mounting brackets
supplied (2).
• Recesses indoor or outdoor in covered
locations.
UL, C-UL (Canada) Listings
• Wet, damp or dry locations, covered ceilings.
• Through-branch circuit conductors (6 #12).
Three Year Limited Warranty
• Complete standard fixture, including ballast.
Thermal Protection
• Per current NEC.
Wattage Availability and Cut-Out Dimensions
Standard Wattage
Catalog No. Lamp/Base
HRR-06025
ED-17/Med
Option -43: Lower Wattage
Pulse MH
-24 (HPS)
Pulse MH
-24 (HPS)
150
150
50-125
35-100
Max. Standby Ceiling
Wattage
Cut-Out
(-49-65-66-LS) Diameter
100
6.5"
Options
-65
Sources and Ballasts
-24
HPS ballast instead. See wattage chart above
for available wattages. Specify voltage.
-39
Electronic dimming ballast instead, for pulse start
metal halide. Consult factory for wattage and
voltage availability.
Regulating electronic MH ballast instead.
Consult factory for availability in 175W or above.
-96
Lower wattage: See Option -43 chart above for
available lower wattages. Specify voltage.
-120 120 volt, 60 Hz. ballast.
-277 277 volt, 60 Hz. ballast.
-347 347 volt, 60 Hz. ballast. Consult factory for
dimming or electronic.
-97 Other voltage ballast instead. Consult factory.
Relays, Standbys, Lamps
PS MET HALIDE
REV
JULYSEPT
20022015
-49
-LP
-LS
Wattage and Voltage
-43
-66
Reflectors and Trims
-16
-31
-32
-45
(See Chart)
Extra circuit DCB socket. Do not energize
simultaneously with main source. Also see -LS.
Electronic standby system and DCB socket.
Following HID outage, provides immediate light
until HID restrikes. Also see -66 and -LS.
Electronic time delay standby system and DCB
socket. Following outage, provides light until
HID reaches 70% output. Also see Option -LS.
With lamp. Specify source, wattage, color
temperature, and clear or coated. (3700oK
standard for metal halide) Consult factory for
other color temperatures.
With T-4 DCB tungsten halogen standby lamp.
Use only with Options -49, -65 or -66.
-63
-69
(Self-Flanged)
Champagne Gold specular Alzak reflector.
(CP x .93)
White flange (only) on self-flanged reflector.
Trim extender. Broadens trim flange O.D. by 1"
to cover larger ceiling opening.
Gasket above reflector flange. Stops dust
streaks on ceiling.
Dune specular Alzak reflector. (CP x .90)
Wheat specular Alzak reflector. (CP x .88)
-70
-71
-77
-90
-91
-93
-94
SofTex Clear softly etched reflector. (CP x .90)
SofTex Dune softly etched reflector. (CP x .81)
SofTex Pewter softly etched reflector. (CP x .78)
SofTex Champagne Gold softly etched reflector.
(CP x .84)
SofTex Wheat softly etched reflector. (CP x .80)
Pewter specular Alzak reflector. (CP x .85)
Custom color reflector. Consult factory.
Lenses
-15 Prismatic flat C#73 glass instead.
-ML UV absorbing tempered Microlux glass instead.
Concentrates distribution.
Mounting Options
-79
-85
Extension collar for up to 2" thick ceilings.
Ceiling Panel; with recessed fixture hole. Lays-in
2' x 2' grid. White.
Other Options
-99
Special modification. Consult factory.
THE KIRLIN COMPANY
3401 EAST JEFFERSON AVENUE • DETROIT, MICHIGAN 48207-4232
(313) 259-6400 • Fax: (313) 259-9409 or (313) 259-3121 • www.kirlinlighting.com
THE KIRLIN COMPANY RESERVES THE RIGHT TO CHANGE, WITHOUT
NOTICE, DETAILS OR SPECIFICATIONS IN PRODUCT DESIGN.
Alzak® is a registered trademark of ALCOA.
lighting since 1895
Performance at a Glance
Plan View
* Dia. (in ft.) shown is where FC
value is half the FC at nadir.
C.U. (Coefficients of Utilization) Tables are available
on request. Please contact your Kirlin representative.
HRR-06025
150W
HRR-06025 (Coated Lamp)
HRR-06025-15 (Clear Lamp)
90˚
Cone of Light*
90˚
Ft.
6
8
10
12
14
16
60˚
4400
45˚
6600
0˚
15˚
30˚
FC
184.8
104.0
66.5
46.2
33.9
26.0
Dia.
5.0
6.6
8.3
9.9
11.6
13.2
2500
60˚
5000
45˚
7500
0˚
EFFIC: 51.6%
S/MH 0.8
15˚
22.5
45.0
67.5
90.0
6653
6384
5275
3832
2418
1613
86
25
13
0
0
6653
6384
5275
3832
2418
1613
86
25
13
0
0
6653
6384
5275
3832
2418
1613
86
25
13
0
0
6653
6384
5275
3832
2418
1613
86
25
13
0
0
6653
6384
5275
3832
2418
1613
86
25
13
0
0
* LER (Luminaire Efficacy Rating) = Luminaire Effic. x Total Lamp Lumens x Ballast Factor
JOB NAME
TYPE
CATALOG NUMBER
VOLTAGE
FC
209.0
117.6
75.2
52.3
38.4
29.4
Dia.
4.3
5.7
7.2
8.6
10.1
11.5
4000
60˚
8000
45˚
12000
0˚
EFFIC: 45.0%
15˚
30˚
S/MH 0.4
Ft.
6
8
10
12
14
16
FC
365.4
205.5
131.6
91.4
67.1
51.4
Dia.
2.5
3.4
4.2
5.1
5.9
6.8
EFFIC: 47.6%
ITL TEST #51695
*LER = 34.2 •AEC = $7.01
CANDLEPOWER DISTRIBUTION
0.0
22.5
45.0
67.5
90.0
7524
6210
5027
3533
1909
914
446
257
73
0
0
7524
6210
5027
3533
1909
914
446
257
73
0
0
7524
6210
5027
3533
1909
914
446
257
73
0
0
7524
6210
5027
3533
1909
914
446
257
73
0
0
7524
6210
5027
3533
1909
914
446
257
73
0
0
45.0
67.5
90.0
13155 13155 13155
10735 10735 10735
5636 5636
5636
3106 3106
3106
2011 2011
2011
1069 1069
1069
385
385
385
148
148
148
45
45
45
0
0
0
0
0
0
13155
10735
5636
3106
2011
1069
385
148
45
0
0
13155
10735
5636
3106
2011
1069
385
148
45
0
0
0.0
0
5
15
25
35
45
55
65
75
85
90
22.5
• AEC = Annual Energy Cost per 1000 lumens
(based on 3000 hours use @ $0.08 KWH).
APPROVAL STAMP
PS MET HALIDE
JULY 2015
2002
REV SEPT
WATTAGE
0
5
15
25
35
45
55
65
75
85
90
Cone of Light*
75˚
Ft.
6
8
10
12
14
16
CANDLEPOWER DISTRIBUTION
0.0
SUBMITTAL DATA
90˚
ITL TEST #51696
*LER = 32.4 •AEC = $7.42
CANDLEPOWER DISTRIBUTION
Input Watts
30˚
S/MH 0.7
ITL TEST #51682
*LER = 35.2 •AEC = $6.81
0
5
15
25
35
45
55
65
75
85
90
Cone of Light*
75˚
75˚
2200
HRR-06025-ML (Clear Lamp)
or repair such fixture or refund the purchase price on presentation of proof of purchase and defective fixture at the offices of manufacturer within three years of original shipment. Liability of manufacturer is limited to the foregoing, and manufacturer shall not be liable for any other damages, direct or indirect, sustained or suffered
by purchaser or any person. This warranty is supplied to the buyer in place of all other warranties, expressed or implied. Seller does not warrant as to merchantability or fitness for a particular use, nor will any oral statement constitute a warranty or amend this specific warranty. Abnormal use, abuse of the fixture, improper installation,
or repair, or modification of the fixture without prior written authorization from the manufacturer will render the warranty void.
Ft. Distance from fixture
FC Footcandles (average)
Dia. Circle of light at 50% of FC
LIMITED WARRANTY: CATALOGED KIRLIN FIXTURES ARE WARRANTIED FREE OF DEFECTS IN WORKMANSHIP OR MATERIAL FOR THREE YEARS FROM DATE OF PURCHASE, INSTALLED TO N.E.C., IN NORMAL USE. Manufacturer at his option will replace
Cone of Light Key
HRR-06025