Larson Electronics LLC
www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Hazardous Location Lighting - 400 Watt High Pressure Sodium - Class 1, Division 2 - Permanent Mount
Part #: HAL-PRM-400W-HPS
Made in the USA
The efficient HAL-PRM-400W-HPS high pressure sodium hazardous area light fixture from Larson Electronics produces 36,000 lumens
of light capable of illuminating an area 18,000 square feet in size. Weather proof and U.L. listed for marine use, this metal halide fixture
is a versatile and ideal exterior lighting solution for both hazardous and non hazardous locations.
The versatile, multi-use HAL-PRM-400W-HPS high pressure sodium fixture from Larson Electronics is weatherproof and suitable for use in
outdoor marine applications, making it an ideal lighting solution for industrial applications, boat docks, building exteriors and outdoor work areas.
The lamp housing is weatherproof and constructed of die cast aluminum featuring a hinged, removable front-access door with two captive
closure screws for easy servicing.
The optical assembly includes a precision-formed aluminum reflector and heat/impact-resistant tempered flat door glass. The aluminum reflector
has a chemically bonded, lightweight, non-breakable ALGLAS® finish on both the inside and outside surfaces providing corrosion resistance,
durability and ease of cleaning. The optical assembly contains a mogul base socket capable of handling the higher pulse ratings of newer HID
systems. Bulb is not included with with this fixture.
Click Photo to Enlarge
Click Photo to Enlarge
Page: 1
Click Photo to Enlarge
Larson Electronics LLC
www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
This hazardous area light is U.L. rated Class 1 Division 1 and 2, Groups A,B,C,D and UL1598 listed for Outdoor Salt Water Marine use with an
IP65 construction. The integral pulse start ballast is protected within the weatherproof housing and operates on 120VAC. This lamp is suitable for
use in areas where flammable petrochemical vapors are sometimes present. The multi-purpose design of this fixture makes it a popular choice
for industrial applications regardless of whether the locations are designated hazardous or not.
This light is highly durable, produces high light output in a wide flood pattern and operates effectively at temperatures to -20 degrees F. Mounting
is via an adjustable coated steel trunnion bracket that allows the fixture to be attached to walls or ceilings and provides secure adjustment and
positioning. All hardware on this unit is corrosion resistant and the die-cast aluminum exterior has an electro-coat dark bronze paint finish. Wiring
is through a convenient wiring box located on the bottom of the heavy duty housing which has a threaded ¾ inch conduit entrance.
Click Here for Installation Instructions
INSTALLATION INSTRUCTIONS This floodlight is provided with a trunnion bracket which can be mounted directly on flat surfaces or building
fronts. The trunnion bracket has a clearance hole for a 3/4-inch bolt used for attachment for such mountings. The 1/2-inch holes on either side
permit additional anchoring, where required. Tighten side trunnion bolts to 18 - 22 foot pounds.
AIMING: Slightly loosen bolts “”A’’ (two on trunnion) and tilt luminaire to desired position and retighten bolts.
LAMPS: Use only lamps specified on nameplate. Bulb not included with fixture. Observe lamp manufacturer’s recommendations and restrictions
on lamp operation, particularly ballast type, burning position, etc.
Lamp Tightness: Mogul Base Lamp: The lamp should be securely inserted to the NEMA-EEI specified torque of 35 inch-pounds which is best
achieved by very firmly tightening to insure application of sufficient torque. Tightening must be sufficient to fully depress and load the center
contact of the socket.
WIRING: Make all electrical connections in accordance with the National Electrical Code and any applicable local code requirements. Verify that
supply voltage is correct by comparing it to nameplate. Three-conductor No. 14 cable (with 90° C minimum insulation) is recommended for
making electrical connections to the P-154. Wiring is accomplished through the wiring box provided on the fixture. The box is provided with a size
3/4-in. NPT threaded conduit opening. Wiring methods must comply with NFPA 70 (The National Electrical Code), Article 501 for Class I, Division
2 Hazardous (Classified) Locations. To get inside the unit, open the door, loosen the (2) screws holding the reflector and remove the reflector.
Verify the correct supply voltage and lamp wattage.
Made in the USA Quality
1. High Efficiency High Pressume Sodium lamp.
2. 90 Lumens per Watt
3. Rugged Die Cast Aluminum Housing.
4. Hinged Lens Door - Tempered Glass.
5. Heavy Duty Door Gasket.
6. Socket: Mogul Base Handles Higher Pulse Ratings of Newer HID
Systems.
7. Low Maintenance.
8. Adjustable Trunnion Bracket Mount- Corrosion Resistant.
9. Electro-Coat Dark Bronze Paint Finish
10. Effective at temperatures to -20 Degrees F.
Page: 2
Larson Electronics LLC
www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Specifications / Additional Information
HAL-PRM-400W-HPS High Pressure Sodium
U.L Ratings
Lamp Type: High Pressure Sodium
Class 1 Division 2 - Groups A,B,C and D
Dimensions: 14 "-Depth, 11"-H, 15 "W
UL1598 Listed Outdoor Salt Water Marine Use
Watts: 400
IP65 Construction
Lumens Per Watt: 90
T1 Temperature Rating
Voltage: 120-277/60, 480, 220/50
Lighting Configuration: Flood Pattern
Mounting: Adjustable Trunnion Bracket
Weight: 35lbs
U.L. Listing: Outdoor Marine Approved
Total Lumens: 36,000
Special Orders- Requirements
Wiring: 3/4 inch Threaded Conduit Entrance
Contact us for special requirements
Click Here to View Dimensional Schematic
Phone: 1-214-616-6180
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: sales@larsonelectronics.com
Scroll Down to Purchase-
Part #: HAL-PRM-400W-HPS (49609)
Links (Click on the below items to view):
- Dimensional Drawing
- IES
- STEP
- DXF
Page: 3